Skip to content
FAQ Shipping Returns Warehouse Pickup

Tool Box Sale

Shop our Tool Box Sale and find the best deals to get your tool box ready for all your project needs.

With over 600 products from worldwide leading brands including Klein Tools, Milwaukee, IDEAL or Greenlee, we most likely have the tools you need.

Limited-time offer, while supplies last.

  • Greenlee High Visibility Digital Multimeter, Model DM-200A*
    Special Order Item
    $157.89

    Greenlee High Visibility Digital Multimeter, Model DM-200A*

    Greenlee
    Description Equipped with a host of advanced features, this Greenlee DM-200A Digital Multimeter is able to accurately measure voltage, current, resistance and frequency. It features a backlit LCD, so it's easy to see the readings in low-light conditions, and it has Beep-Jack™ audible indicators. Benefits Accurately measures voltage, current, resistance and frequency Use to test continuity and diodes Readings are clearly displayed on the backlit LCD 2 voltage detection modes: non-contact or single test lead Beep-Jack™ audible warning indicators let you know if the test lead is incorrectly inserted High visibility 6000 count LCD display Auto power off, display backlight, analog bar graph Automatic/manual range selection Relative offset mode Data hold Use optional USB / RS-232 interface DMSC-2U for direct-to-PC logging Accessories included: (2)1.5V AAA batteries, bead temperature probe (DM-210A, DM-510A only, 400°F/204°C max), test leads, protective boot Technical Information Brand: Greenlee Voltage Measurement: 60mV to 1000V AC/DC Amperage Measurement: 600mA to 8A AC/DC Resistance: 600? to 60M? Frequency (Hz): 50 ~ 400 Measurement Category: Cat IV, 300V; Cat III 600V, Cat II 1000V Documents Brochure Instruction Manual
    • Available for special order
  • Greenlee D-Versi Bit Starter Kit, Model DBITKIT*
    Special Order Item
    $125.54

    Greenlee D-Versi Bit Starter Kit, Model DBITKIT*

    Greenlee
    Description Flexible and versatile drill bit that simplifies the installation of wires or cable on an existing wall. It allows you to easily switch from drilling to pulling when working between studs and joists. Included in Kit 09-03-54B bit 712P placement tool 150 pulling grip Benefits All the tools to complete a typical wiring job Allows placement of the drill bit at any point within the wall Helpful in judging where the bit will be during drilling to avoid accidentally drilling through the wall Useful for vertical and horizontal placements Technical Information Brand: Greenlee DVersiBIT Kit with 9/16" drill, placement tool and grip for pulling 1/2" OD wire.
    • Available for special order
  • Greenlee Open Jaw Clamp Meter, Model CSJ-100*
    Special Order Item
    $203.15

    Greenlee Open Jaw Clamp Meter, Model CSJ-100*

    Greenlee
    Description Use the Greenlee CSJ-100 Open-Jaw Clamp Meter anytime you need to measure amperage or voltage. It's easy to use with its slim, compact profile and bright LED. It offers a data hold function to capture the readings, and comes with test leads and a carrying case. Benefits AC amperage, AC/DC voltage measurement Open jaw design eases AC current measurement Slim profile with build-in probe storage on back Measures resistance up to 20MΩ Audible continuity and diode test Bright LED and audible alarm for non-contact voltage detection Auto power off for longer battery life Data hold to capture measurements 2000 count LCD Accessories included: (2)1.5V AAA batteries, test leads and carrying case Technical Information Brand: Greenlee Amperage: 200 Voltage Measurement: 200, 1000V Resistance Measurement: 200 Ω; 2, 20, 200 kΩ; 2, 20 MΩ Display: LCD, 4000 Count Jaw Opening: 1.02" (26 mm) Measurement Category: CAT III, 600 V Per UL 61010-1 Standard: CAT IV, C/US UL Listed, CAT III, CE Listed Documents Instruction Manual
    • Available for special order
  • Greenlee True RMS Clamp Meter, 600A AC, Model CM-450*
    Special Order Item
    $146.52

    Greenlee True RMS Clamp Meter, 600A AC, Model CM-450*

    Greenlee
    Description Whether you need to measure amperage or voltage, this Greenlee CM-450 Digital Clamp-On Meter has you covered. It measures up to 600 A and 600 VAC/VDC with true RMS for accuracy. The LCD makes it easy to see the readings, and the data hold function can be used to capture the screen in place. Benefits AC amperage, AC/DC voltage measurement True RMS for the most accurate measurement where harmonics are present Quick, easy operation Auto power off for longer battery life Resistance measurement Audible continuity and diode tests Frequency measurement Data hold to capture measurement 4000 count LCD Accessories included: Test leads, 3V Standard button battery (IEC-CR 2032; ANSI-NEDA 54004LC) Technical Information Brand: Greenlee Amperage Measurement: 40, 400, 600 A AC Jaw Opening: 1.02" (26 mm) Display: LCD, 4000 count Voltage AC: 4, 40, 400, 600 V AC Voltage DC: 400 mV, 4, 40, 400, 600V DC Resistance: 400Ω; 4, 40, 400Ω; 4, 40MΩ Measurement Category: CAT III, 600V per UL 61010-1 Documents Instruction Manual
    • Available for special order
  • Greenlee Clamp Meter, 400A AC, Model CM-330*
    Special Order Item
    $125.14

    Greenlee Clamp Meter, 400A AC, Model CM-330*

    Greenlee
    Description Use this Greenlee CM-330 Clamp-On Ammeter to easily measure AC currents. It's capable of reading up to 400 A and displays the information on the 2,000-count LCD. Thanks to its compact size, you can stow the meter inside any tool pouch whenever you're not using it. Benefits AC current measuring capability up to 400 amps Compact size, fits easily into tool pouch Data hold and Max hold to capture important readings 2000-Count LCD Lifetime Limited Warranty Accessories included: (1) 9V battery, carrying case Lifetime Limited Warranty Technical Information Brand: Greenlee Weight: 1 lb. (45 g) Amperage measurement 20.00, 200.0, 400 A AC Jaw Opening 1.18" (30 mm) Display 2000-count LCD Measurement Category CAT III, 600 V per UL 61010B-1 Documents Instruction Manual
    • Available for special order
  • Greenlee Quick Release Ratcheting PVC Cutter, 1-1/4-Inch , Model 864QR*
    Special Order Item
    $168.01

    Greenlee Quick Release Ratcheting PVC Cutter, 1-1/4-Inch , Model 864QR*

    Greenlee
    Description You can use the Greenlee 864QR Quick-Release Ratcheting PVC Cutter to cut PVC, CPVC, PPC PEC PEX, rubber hose and multilayer tubing. The tool is ergonomic and slip-proof to keep your grip comfortable, and it features a quick-release design to support convenient 1-handed operation. Benefits Replaceable Blade: Effortlessly replace the blade without tools or loose parts Ergonomic Design: Reduced hand force during operation Square Jaw: Easily squares up all ranges of pipe sizes up to 1-5/8" O.D. to ensure a straight cut Blade Release Lever: Quickly retract the blade with the push of a lever for one-handed operation Dial Handle Lock: Located at the top of the tool to prevent accidental locking Recessed Blade: Safely store tool with blade fully open or closed Molded Grip: Slip-proof, ergonomically molded grips allow for increased comfort and reduced fatigue Intended Materials: Cuts PVC, CPVC, PP, PE, PEX, Rubber hose, Multilayer Tubing Technical Information Brand: Greenlee Application : Ratcheting PVC Cutter Capacity : 1/8" - 1-5/8" O.D. (3 mm - 42 mm O.D.) Cutting Capacity : 1/8" - 1-5/8" O.D. (3 mm - 42 mm O.D.) Drive Type : Ratcheting Overall Length : 9" (228.6 mm) Package : Clamshell Type : Ratcheting PVC Cutter Weight : 1.35 lb (610 g) Documents Brochure
    • Available for special order
  • Greenlee Site-Rite Aluminum Hand Bender with Handle for 1-Inch EMT, Model 842AH*
    Special Order Item
    $177.76

    Greenlee Site-Rite Aluminum Hand Bender with Handle for 1-Inch EMT, Model 842AH*

    Greenlee
    Description Features an aluminum head together with an enlarged foot pedal to enhance control, stability, and leverage, along with a strong, stable square hook design. A superior sighting system features cast-in, readable markings with optimum visibility in low-light. Can bend 1" EMT and 3/4" Rigid/IMC conduits. Benefits Superior, patented Site-Rite sighting system featuring cast-in, readable markings on the bender heads and a finish that provides for the best visibility in low-light Choice of aluminum or iron alloy construction provides options depending on the user's preference for feel and weight Strong, stable square hook design 1-1/2" bender heads both offer the power pedal feature with a larger foot area on the head for greater control, stability and leverage 1/2", 3/4" & 1" bender heads all have enlarged foot pedals and increased toe room to ensure greater control, stability and leverage All the bender handles area consistent diameter, offering a bigger grip area, while still straight up and down for fast 30-degree bends Lifetime Limited Warranty Technical Information Brand: Greenlee Centerline Bend Radius: 6-1/2" (165.1 mm) Conduit Type & Size: 1" EMT 3/4" Rigid/IMC Marking: 10, 22-1/2, 30, 45, 60° Pedal Type: Foot Sub Brand: Site-Rite Type: Hand Bender Weight: 11 lbs (5 kg) Includes: Handle
    • Available for special order
  • Greenlee Site-Rite Aluminum Hand Bender with Handle for 1/2-Inch EMT, Model 840AH*
    Special Order Item
    $87.51

    Greenlee Site-Rite Aluminum Hand Bender with Handle for 1/2-Inch EMT, Model 840AH*

    Greenlee
    Description Features an aluminum head together with an enlarged foot pedal to enhance control, stability, and leverage, along with a strong, stable square hook design. A superior sighting system features cast-in, readable markings with optimum visibility in low-light. Can bend 1/2" EMT conduits. Benefits Superior, patented Site-Rite sighting system featuring cast-in, readable markings on the bender heads and a finish that provides for the best visibility in low-light Choice of aluminum or iron alloy construction provides options depending on the user's preference for feel and weight Strong, stable square hook design 1-1/2" bender heads both offer the power pedal feature with a larger foot area on the head for greater control, stability and leverage 1/2", 3/4" & 1" bender heads all have enlarged foot pedals and increased toe room to ensure greater control, stability and leverage All the bender handles area consistent diameter, offering a bigger grip area, while still straight up and down for fast 30-degree bends Lifetime Limited Warranty Technical Information Brand: Greenlee Centerline Bend Radius: 4-3/16" (106.5 mm) Conduit Type & Size: 1/2" EMT Marking: 10, 22-1/2, 30, 45, 60 ° Pedal Type: Foot Sub Brand: Site-Rite Type: Hand Bender Weight: 5.5 lbs (2.5 kg) Includes: Handle
    • Available for special order
  • Greenlee D-Versi Bit Placement Tool, Model 712P
    $37.40

    Greenlee D-Versi Bit Placement Tool, Model 712P

    Greenlee
    Description The placement tool lets you place your compatible drill bit at any point within the wall. The tool can be used for horizontal and vertical placements. Benefits Allows placement of the drill bit at any point within the wall Helpful in judging where the bit will be during drilling to avoid accidentally drilling through the wall Useful for vertical and horizontal placements Technical Information Brand: Greenlee Size: 12"
    • In stock
    • Eligible for free shipping
  • Greenlee Steel Fish Tape, 1/8-Inch x 50-Ft, Model 438-5H*
    Special Order Item
    $41.12

    Greenlee Steel Fish Tape, 1/8-Inch x 50-Ft, Model 438-5H*

    Greenlee
    Description Features oil-tempered spring steel for an excellent fishing experience, with a comfortable handle that reduces fatigue. Offers superior rapid tape payout and rewind, as well as a dirt-free tape finish keeping hands clean during use. Small fish eye design with offset bend allows for an improved fishing ability. Benefits Oil-tempered spring steel for excellent fishing performance Dirt-free tape finish keeps hands cleaner during use Advanced comfort handle grip reduces fatigue Superior rapid tape pay-out and rewind Smaller fish eye with offset bend for improved fishing ability Improved low profile tip for easy fishing through all sizes of conduit Viewing port gives visibility to remaining tape and ability to remove jobsite debris quickly Rugged case design improves drop impact capability Flared case with grip ridges for no slip handling Technical Information Brand: Greenlee Tensile Strength: 400 lbs (1.700 KN) Maximum Design Strength Length: 50 ft (15.2 m) Width: 1/8" (3.2 mm) Material: Oil-tempered spring steel Sub Brand Name: MagnumPRO
    • Available for special order
  • Greenlee 6-Piece Self-Feeding Spade Bit Kit, Model 34AR-6*
    Special Order Item
    $48.09

    Greenlee 6-Piece Self-Feeding Spade Bit Kit, Model 34AR-6*

    Greenlee
    Description Features an innovative self-feeding design that is heat treated for prolonged life, along with requiring less effort and reduced vibration. Offers a unique design allowing for enlargement of existing holes, as well as a hole at the top center of the bit to pull wiring. Included in Set 34A-3/8 3/8" Spade Bit 34A-1/2 1/2" Spade Bit 34A-5/8 5/8" Spade Bit 34A-3/4 3/4" Spade Bit 34A-7/8 7/8" Spade Bit 34A-1 1" Spade Bit Benefits Bore hardwood, softwood, plywood, and drywall Spade bits bore hardwood, softwood, plywood and drywall Innovative self-feeding design requires less effort and reduces vibration Forged and heat treated for long life For use in 1/4" or larger power drills Hole in top center of bit for wire pulling Technical Information Brand: Greenlee Length: 34A Spade Bit - 6" Package: 6 Weight: 0.83 lbs (376.48 g) Documents Brochure
    • Available for special order
  • Greenlee D-Versi Bit Type A Auger Bit, 1-Inch x 54-Inch, Model 16-04-54A*
    Special Order Item
    $101.08

    Greenlee D-Versi Bit Type A Auger Bit, 1-Inch x 54-Inch, Model 16-04-54A*

    Greenlee
    Description The D-VersiBIT System makes it possible to easily accomplish even complex installations. This patented system attaches a quality drill bit to a long flexible spring steel shaft. When used with the Placement Tool, this flexibility makes it possible to easily manipulate the bit within walls. After drilling, attach a D-VersiGRIP to the hole in the drill and pull wire or cable back through the wall. Benefits Type A Auger Wood-type auger bit with screw point Pulls itself through wood , avoids walking or skidding Excellent for drilling in soft woods or through thin sections Slow back-taper allows for easy retrieval Bends to meet your needs Technical Information Brand: Greenlee Bit Diameter: 1" (25.4 mm) Shaft Length: 54" (1371.6 mm) Shaft Diameter: 1/4" (6.4 mm) Type: Type A
    • Available for special order
  • Greenlee D-Versi Bit Type A Auger Bit, 3/4-Inch, Model 12-04-54A*
    Special Order Item
    $98.78

    Greenlee D-Versi Bit Type A Auger Bit, 3/4-Inch, Model 12-04-54A*

    Greenlee
    Description The D-VersiBIT System makes it possible to easily accomplish even complex installations. This patented system attaches a quality drill bit to a long flexible spring steel shaft. When used with the Placement Tool, this flexibility makes it possible to easily manipulate the bit within walls. After drilling, attach a D-VersiGRIP to the hole in the drill and pull wire or cable back through the wall. Benefits Type A Auger Wood-type auger bit with screw point Pulls itself through wood , avoids walking or skidding Excellent for drilling in soft woods or through thin sections Slow back-taper allows for easy retrieval Bends to meet your needs Technical Information Brand: Greenlee Bit Diameter: 3/4" (19.1 mm) Shaft Length: 54" (1371.6 mm) Shaft Diameter: 3/16" (4.8 mm) Type: Type A
    • Available for special order
  • Greenlee D-Versi Bit Type A Auger Bit, 3/8-Inch, Model 06-03-72A*
    Special Order Item
    $92.55

    Greenlee D-Versi Bit Type A Auger Bit, 3/8-Inch, Model 06-03-72A*

    Greenlee
    Description The D-VersiBIT System makes it possible to easily accomplish even complex installations. This patented system attaches a quality drill bit to a long flexible spring steel shaft. When used with the Placement Tool, this flexibility makes it possible to easily manipulate the bit within walls. After drilling, attach a D-VersiGRIP to the hole in the drill and pull wire or cable back through the wall. Benefits Type A Auger Wood-type auger bit with screw point Pulls itself through wood , avoids walking or skidding Excellent for drilling in soft woods or through thin sections Slow back-taper allows for easy retrieval Bends to meet your needs Technical Information Brand: Greenlee Bit Diameter: 3/8" (9.5 mm) Shaft Length: 72" (1828.8 mm) Shaft Diameter: 3/16" (4.8 mm) Type: Type A
    • Available for special order
  • Greenlee Water Pump Pliers, 12-Inch, Model 0451-12WD*
    Special Order Item
    $62.10

    Greenlee Water Pump Pliers, 12-Inch, Model 0451-12WD*

    Greenlee
    Description The Greenlee 0451-12WD Water Pump Pliers are ideal for a range of applications. Use them to grip round materials, hold pipes, turn nuts and bolts and more. They have comfortable handles and you can adjust the jaws with the press of a button. Benefits Multi-purpose jaw with opposing off-set teeth ensure maximum grip on rounded material Push-Button design provides quick and easy jaw adjustments Precision jaw adjustment for adaptation to a wide range of sizes Double-dipped vinyl handle grips provide comfort and slip resistance Technical Information Brand: Greenlee Application: Round, Flat, Square, or Hex Material Overall Length: 12" (30.5 cm) Handle Type: Double-dipped vinyl Adjustment Type: Push-button Jaw Shape: Rhombus Documents Brochure
    • Available for special order
  • Greenlee Water Pump Pliers, 10-Inch, Model 0451-10WD*
    Special Order Item
    $51.01

    Greenlee Water Pump Pliers, 10-Inch, Model 0451-10WD*

    Greenlee
    Description The Greenlee 0451-10WD Water Pump Pliers are ideal for a range of applications. Use them to grip round materials, hold pipes, turn nuts and bolts and more. They have comfortable handles and you can adjust the jaws with the press of a button. Benefits Multi-purpose jaw with opposing off-set teeth ensure maximum grip on rounded material Push-Button design provides quick and easy jaw adjustments Precision jaw adjustment for adaptation to a wide range of sizes Double-dipped vinyl handle grips provide comfort and slip resistance Technical Information Brand: Greenlee Application: Round, Flat, Square, or Hex Material Overall Length: 10" (25.4 cm) Handle Type: Double-dipped vinyl Adjustment Type: Push-button Jaw Shape: Rhombus Documents Brochure
    • Available for special order
  • Greenlee Water Pump Pliers, 8-Inch, Model 0451-08WD*
    Special Order Item
    $46.68

    Greenlee Water Pump Pliers, 8-Inch, Model 0451-08WD*

    Greenlee
    Description The Greenlee 0451-08WD Water Pump Pliers are ideal for a range of applications. Use them to grip round materials, hold pipes, turn nuts and bolts and more. They have comfortable handles and you can adjust the jaws with the press of a button. Benefits Multi-purpose jaw with opposing off-set teeth ensure maximum grip on rounded material Push-Button design provides quick and easy jaw adjustments Precision jaw adjustment for adaptation to a wide range of sizes Double-dipped vinyl handle grips provide comfort and slip resistance Technical Information Brand: Greenlee Application: Round, Flat, Square, or Hex Material Overall Length: 8" (20.3 cm) Handle Type: Double-dipped vinyl Adjustment Type: Push-button Jaw Shape: Rhombus Documents Brochure
    • Available for special order
  • Greenlee Square Recess Tip Driver #3 x 4-Inch, Model 0353-14C*
    Special Order Item
    $14.05

    Greenlee Square Recess Tip Driver #3 x 4-Inch, Model 0353-14C*

    Greenlee
    Description With a rust-resistant finish, the Greenlee 0353-14C Square Recess Tip Driver offers durability you can count on. The tip is precision-machined to give you the most accurate fit, so that you can tighten nuts and bolts effectively. Benefits Precision tip for accurate fastener fit. Handle marked for easy identification of screwdriver size and type. Heavy-duty construction for longer life. High-grade, rust resistant, chrome-plated finish. Soft, cushioned grip for extra comfort and torque. Exceeds ASME/ANSI specifications. Lifetime limited warranty. Technical Information Brand: Greenlee Tip Type: Square recess Tip Size: #3 Tip Finish: Chrome plating Handle Type: Soft, cushioned grip Length: 4" (10.16 cm) shank, 8.25" (21 cm) overall
    • Available for special order
  • Greenlee Square Recess Tip Driver #1 x 4-Inch, Model 0353-12C*
    Special Order Item
    $14.25

    Greenlee Square Recess Tip Driver #1 x 4-Inch, Model 0353-12C*

    Greenlee
    Description With a rust-resistant finish, the Greenlee 0353-12C Square Recess Tip Driver offers durability you can count on. The tip is precision-machined to give you the most accurate fit, so that you can tighten nuts and bolts effectively. Benefits Precision tip for accurate fastener fit. Handle marked for easy identification of screwdriver size and type. Heavy-duty construction for longer life. High-grade, rust resistant, chrome-plated finish. Soft, cushioned grip for extra comfort and torque. Exceeds ASME/ANSI specifications. Lifetime limited warranty. Technical Information Brand: Greenlee Tip Type: Square recess Tip Size: #1 Tip Finish: Chrome plating Handle Type: Soft, cushioned grip Length: 4" (10.16 cm) shank, 7.75" (19.7 cm) overall
    • Available for special order
  • Greenlee Long Nose Pliers/Side Cutting with Stripping Hole & Dipped Grip, 8-Inch, Model 0351-08SD*
    Special Order Item
    $49.21

    Greenlee Long Nose Pliers/Side Cutting with Stripping Hole & Dipped Grip, 8-Inch, Model 0351-08SD*

    Greenlee
    Description Whether you're cutting or stripping, reach for the Greenlee 0351-08SD Long Nose Stripping Pliers. The durable steel construction ensures long-lasting reliability, and the slip-resistant handles make it easy to cut through solid and/or stranded wires with ample force. Benefits For cutting solid and stranded copper wire Durably constructed from chrome-vanadium steel Double-layered vinyl handles are comfortable to use Slip-resistant design helps increase your gripping power Wider grip design provides larger load bearing area Effectively cuts most hardened wire, ACSR, bolts, screws, and nails Forged from Chrome vanadium steel for greater durability and strength Handles allow for easy storage of tools in pouches and tool bags Exceeds ASME/ANSI specifications Technical Information Brand: Greenlee Grip Type: Dipped Handle Type: Double-layered vinyl Material: Chrome-vanadium steel Length: 8" (20.32 cm) grip; 8.56" (21.7 cm) overall Weight: 0.64 lb (0.29 kg)
    • Available for special order
  • Greenlee Long Nose Pliers/Side Cutting with Dipped Grip, 7-Inch, Model 0351-07D*
    Special Order Item
    $38.32

    Greenlee Long Nose Pliers/Side Cutting with Dipped Grip, 7-Inch, Model 0351-07D*

    Greenlee
    Description Need something that can easily cut through copper wire? Greenlee 0351-07D Dipped Long Nose Pliers can help you out. These pliers are specifically designed for both stranded and solid copper wire. Not only do they provide smooth, clean cuts, but they also have comfortable handles with slip resistance. Benefits Wider grip design provides larger load bearing area. Forged from chrome vanadium steel for greater durability and strength. Effectively cuts most hardened wire, ACSR, bolts, screws, and nails. Diamond-serrated jaws and hardened cutting edges for optimum cutting and gripping performance. Through-hardened steel for longer life. Exceeds ASME/ANSI specifications. Rugged riveted construction for smooth precise action. Dipped Grip: doubled layered vinyl handles for comfort and slip resistance. Handles allow for easy storage of tools in pouches and tool bags. Technical Information Brand: Greenlee Grip Type: Dipped Handle Type: Double-layered vinyl Material: Chrome-vanadium steel Length: 7" (17.78 cm) grip; 7.13" (18.1 cm) overall Weight: 0.3 lb (0.14 kg)
    • Available for special order
  • Greenlee High Leverage Diagonal Cutting Pliers with Angled Molded Grip, 8-Inch, Model 0251-08AM*
    Special Order Item
    $58.07

    Greenlee High Leverage Diagonal Cutting Pliers with Angled Molded Grip, 8-Inch, Model 0251-08AM*

    Greenlee
    Description Greenlee's High Leverage Diagonal Pliers are molded grip cutting pliers. The pliers are forged from chrome vanadium steel for greater durability and strength. They effectively cut most hardened wire, ACSR, bolts, screws and nails. The pliers feature dual cutting edges for optimum cutting performance and have precision-machined, induction-hardened blades that strengthen the cutters and provide consistent performance. The pliers also feature double layered vinyl handles for comfort and slip resistance. The handles allow for easy storage of tools in pouches and tool bags. Benefits Forged from Chrome vanadium steel for greater durability and strength. Precision-machined and induction-hardened blades strengthen cutters and provide consistent performance. Effectively cuts most hardened wire, ACSR, bolts, screws, and nails. Through-hardened steel for longer life. Dual cutting edges for optimum cutting performance. Exceeds ASME/ANSI specifications. Rugged riveted construction for smooth precise action. Molded Grip: Custom grip allows area for user identification Handles allow for easy storage of tools in pouches and tool bags. Technical Information Brand: Greenlee Overall Length: 8-3/4" (22.2 cm) Weight: 0.850 lb (390 g) Size: 8 " (20.3 cm) Angled Molded Grip Material: Chrome Vanadium Steel
    • Available for special order
  • Greenlee High Leverage Diagonal Cutting Pliers with Angled Dipped Grip, 8-Inch, Model 0251-08AD*
    Special Order Item
    $51.94

    Greenlee High Leverage Diagonal Cutting Pliers with Angled Dipped Grip, 8-Inch, Model 0251-08AD*

    Greenlee
    Description Greenlee's High Leverage Diagonal Pliers are dipped grip cutting pliers. The pliers are forged from chrome vanadium steel for greater durability and strength. They effectively cut most hardened wire, ACSR, bolts, screws and nails. The pliers feature dual cutting edges for optimum cutting performance and have precision-machined, induction-hardened blades that strengthen the cutters and provide consistent performance. The pliers also feature double layered vinyl handles for comfort and slip resistance. The handles allow for easy storage of tools in pouches and tool bags. Benefits Forged from Chrome vanadium steel for greater durability and strength. Precision-machined and induction-hardened blades strengthen cutters and provide consistent performance. Effectively cuts most hardened wire, ACSR, bolts, screws, and nails. Through-hardened steel for longer life. Dual cutting edges for optimum cutting performance. Exceeds ASME/ANSI specifications. Rugged riveted construction for smooth precise action. Dipped Grip: Double layered vinyl handles for comfort and slip resistance. Handles allow for easy storage of tools in pouches and tool bags. Technical Information Brand: Greenlee Overall Length: 8-3/4" (22.2 cm) Weight: 0.850 lb (390 g) Size: 8" (20.3 cm) Angled Dipped Grip Material: Chrome Vanadium Steel
    • Available for special order
  • Greenlee Screwdriver Heavy Duty Phillips #1 x 3-Inch, Model 0153-31C*
    Special Order Item
    $11.37

    Greenlee Screwdriver Heavy Duty Phillips #1 x 3-Inch, Model 0153-31C*

    Greenlee
    Description Greenlee's #1 x 3" Heavy Duty Phillips Tip Screwdriver features a precision-machined tip for an exact fit and a strong, durable black phosphate tip to prevent chipping of plating. The screwdriver has a soft, cushioned grip handle for extra comfort and torque and the handle is marked with size, type and length for easy identification. The #1 x 3" Heavy Duty Phillips Tip Screwdriver is a great addition to any tool kit. Benefits Heavy duty construction for longer lifetime. Handle marked for easy identification. Soft, cushioned grip for extra comfort and torque. Precision-machined tip. Black phosphate tip. Lifetime limited warranty Exceeds ASME/ANSI specifications Technical Information Brand: Greenlee Tip Type: Phillips Tip Size: #1 Tip Finish: Phosphate plating Handle Type: Soft, cushioned grip Length: 3" (7.62 cm) shank; 6.75" (17.2 cm) overall
    • Available for special order
  • Greenlee Screwdriver Heavy Duty Cabinet Tip, 1/4-Inch x 4-Inch, Model 0153-25C*
    Special Order Item
    $14.11

    Greenlee Screwdriver Heavy Duty Cabinet Tip, 1/4-Inch x 4-Inch, Model 0153-25C*

    Greenlee
    Description Greenlee's 0153-25C is a 1/4" x 4" round shank, flat blade, heavy-duty cabinet tip screwdriver. It features a precision-machined tip for an accurate fastener fit. The tip is constructed of a durable black phosphate that prevents chipping of the plating. The screwdriver also features a soft, cushioned grip for extra comfort and torque and its handle is marked with screwdriver size type and length for easy identification. The narrow cabinet tip makes it an ideal tool for limited access applications. The 0153-25C is the perfect addition to any tool box. Benefits Narrow cabinet tip for limited access applications Handle marked for easy identification. Soft, cushioned grip for extra comfort and torque. Precision-machined tip. Black phosphate tip. Lifetime limited warranty Exceeds ASME/ANSI specifications Technical Information Brand: Greenlee Tip Type: Cabinet Tip Size: 1/4" (6.35 mm) Tip Finish: Phosphate plating Handle Type: Soft, cushioned grip Shank Shape: Round Head Type: Flat Length: 4" (10.16 cm) shank; 8.34" (21.2 cm) overall
    • Available for special order
  • Greenlee Screwdriver Heavy Duty Cabinet Tip, 3/16-Inch x 4-Inch, Model 0153-21C*
    Special Order Item
    $12.08

    Greenlee Screwdriver Heavy Duty Cabinet Tip, 3/16-Inch x 4-Inch, Model 0153-21C*

    Greenlee
    Description Greenlee's 0153-21C is a 3/16" x 4" round shank, flat blade, heavy-duty cabinet tip screwdriver. It features a precision-machined tip for an accurate fastener fit. The tip is constructed of a durable black phosphate that prevents chipping of the plating. The screwdriver also features a soft, cushioned grip for extra comfort and torque and its handle is marked with screwdriver size type and length for easy identification. The narrow cabinet tip makes it an ideal tool for limited access applications. The 0153-21C is the perfect addition to any tool box. Benefits Narrow cabinet tip for limited access applications Handle marked for easy identification. Soft, cushioned grip for extra comfort and torque. Precision-machined tip. Black phosphate tip. Lifetime limited warranty Exceeds ASME/ANSI specifications Technical Information Brand: Greenlee Tip Type: Cabinet Tip Size: 3 /16 " (4.78 mm) Tip Finish: Phosphate plating Handle Type: Soft, cushioned grip Shank Shape: Round Head Type: Flat Length: 4" (10.16 cm) shank; 7.75" (19.7 cm) overall
    • Available for special order
  • Greenlee 4-Piece Mini Screwdriver Set, Model 0153-03C*
    Special Order Item
    $40.18

    Greenlee 4-Piece Mini Screwdriver Set, Model 0153-03C*

    Greenlee
    Description Greenlee's four piece screwdriver set is made with heavy-duty construction for longer life. Handle marked for easy identification of screwdriver size, type, and length. Precision-machined tips for accurate fastener contact. Strong, durable black phosphate tips prevents plate chipping and reduces slipping. Included in Set #0 Phillips 1/16" Keystone 3/32" Cabinet 1/8" Cabinet Benefits Precision machined tips for exact fastener fit. Handle marked for easy identification of screwdriver size, type and length. Soft, cushioned grip for extra comfort and no slipping. Strong durable black phosphate tips to prevent chipping or plating. Technical Information Brand: Greenlee Weight: 0.16 lb (80 g) Product Dimensions: 25.4 x 25.4 x 30.48 cm
    • Available for special order
  • Greenlee 7-Piece Screwdriver Set, Model 0153-02C*
    Special Order Item
    $88.45

    Greenlee 7-Piece Screwdriver Set, Model 0153-02C*

    Greenlee
    Description Greenlee's seven piece screwdriver set is made with heavy-duty construction for longer life. Handle marked for easy identification of screwdriver size, type, and length. Precision-machined tips for accurate fastener contact. Strong, durable black phosphate tips prevents plate chipping and reduces slipping. High-grade, rust resistant, chrome-plated finish. Soft, cushioned grip for extra comfort and torque. Exceeds ASME/ANSI specifications. Lifetime limited warranty. This is not an insulated tool. Included in Set 3/16" x 4" Cabinet 3/16" x 6" Cabinet 1/4" x 4" Keystone 1/4" x 4" Cabinet 5/16" x 6" Keystone #1 x 3" Phillips #2 x 4" Phillips Benefits Heavy-duty construction for longer life. Handle marked for easy identification of screwdriver size, type and length. Precision-machined tips for accurate fastener contact. Strong, durable black phosphate tips prevents plate chipping and reduces slipping. High-grade, rust resistant, chrome-plated finish. Soft, cushioned grip for extra comfort and torque. Technical Information Brand: Greenlee Weight: 1.630 lb (740 g) Product Dimensions: 25.4 x 25.4 x 30.48 cm
    • Available for special order
  • Greenlee Terminators Automatic Wire Stripper, Model 1935*
    Special Order Item
    $73.41

    Greenlee Terminators Automatic Wire Stripper, Model 1935*

    Greenlee
    Description The wire stripper is designed for use with solid and stranded wire with PVC or THHN insulation. The production-grade design provides reliable performance. Benefits Production grade wire stripper strips insulation from most smaller gauge wire. Strips up to 7/8' (22.2 mm) length. Strips PVC and THHN insulation. For use with solid and stranded wire. Technical Information Brand: Greenlee Application: Stripper for solid and stranded wire Type: Automatic wire stripper Capacity: 20 - 10 AWG (.5 mm2 - 6 mm2) with PVC or THHN insulation
    • Available for special order
  • Greenlee Compact Ratchet Cable Cutter, Model 759*
    Sale
    $485.86
    $450.75

    Greenlee Compact Ratchet Cable Cutter, Model 759*

    Greenlee
    Description Greenlee's ratcheting cable cutter is designed for simple, one-hand operation. Benefits Simple, one-hand operation. Compact - convenient for working in tight places and stores easily in tool pouches. Single-speed ratchet mechanism. Blade release allows blades to be opened in mid-cut. Heavy-duty blades provide long life. Technical Information Brand: Greenlee Weight: 1.4 lbs. (0.6 kg) Length: 10-1/2" (262 mm) Maximum Capacity - Copper: 500 kcmil (MCM) (240 mm2) Maximum Capacity - Aluminum: 750 kcmil (MCM) (400 mm2) Maximum Capacity - Communications Cable: 1-1/8" (28 mm) Frequent Use Capacity - Copper: 400 kcmil (MCM) (185 mm2) Frequent Use Capacity - Aluminum: 600 kcmil (MCM) (300 mm2) Documents Manual
    • Only 1 left in stock
    • Free shipping
  • Greenlee Poly Fish Line Tracer Green 6500-Ft, Model 430
    $139.27

    Greenlee Poly Fish Line Tracer Green 6500-Ft, Model 430

    Greenlee
    Description Quick and easy to use this product remains tangle-free when dispensing, along with being resistant to rot and mildew. Features a tensile strength of 210 pounds. Benefits Ready-to-use, pre-punched hole in lid with resealable cap Use with power fishing systems directly from the container Resists tangling when dispensing Rot and mildew resistant Handy reusable plastic dispenser pail with handle keeps the line dry To be used for pulling a rope through a conduit, as well as with power fishing systems directly from the container. Technical Information Brand: Greenlee Tensile Strength: 210 lbs (934 N) Average Breaking Strength Thickness: 1 Ply Type: Twine, Spiral Wrap, Tracer Length: 6500 ft (1981 m) Weight: 11 lbs (5 kg) Color: Green
    • In stock
    • Free shipping
  • IDEAL BiMetal Hole Saw, 14 Piece Kit, Model 36-501
    Sale
    $328.99
    $164.50

    IDEAL BiMetal Hole Saw, 14 Piece Kit, Model 36-501

    IDEAL
    Description IDEAL® Bi-Metal Hole Saws utilize M42 high-speed steel with 8% premium cobalt and a rigid, solid back plate, providing the highest strength and greater wear resistance. The extreme deep gulleted teeth design clears out uniform chips that minimize binding, providing fast drilling times. With a standard 1-7/8” cutting dept, you can save time cutting 2’x4’s with a single pass design. IDEAL® Bi-Metal Hole Saws effectively cut through a wide range of materials, including stainless steel, sheet metal, as well as common non-ferrous materials, such as aluminum, copper, brass, wood, engineered wood, nail embedded wood, and plastics. Benefits Constructed from M42 high-speed steel with 8% premium cobalt content Rigid solid steel backplate 4/6 variable pitch geometry with unique fleem ground teeth design; minimize binding on the job that provides 1.2x faster drilling time 1-7/8 in. depth of cut Diamond sides provide quick plug removal (available on 7/8 in. to 6 in. hole saws) Cats eye openings on solid backplate(available in 2 in. to 6 in. hole saws) Kit Includes: 7/8 in. 36-516, 1-1/8 in. 36-520, 1-3/8 in. 36-524, 1-3/4 in. 36-350, 2 in. 36533, 2-1/2 in. 36-539, 3 in. 36-544, 3-5/8 in. 36-549, 4-1/8 in. 36-553, 4-1/2 in. 36-556 and Hole Saw Arbors 36-570, 36-572, 36-573 Comes in a rugged and durable molded plastic carrying case Technical Information Type: Bi-Metal Hole Saws Saw Blade Material: Bi-Metal Cable Cutter Materials Cut: Aluminum Documents Brochure
    • Only 1 left in stock
    • Free shipping
  • IDEAL Lockout/Tagout Starter Safety Kit, Model 44-973
    Sale
    $199.99
    $100.00

    IDEAL Lockout/Tagout Starter Safety Kit, Model 44-973

    IDEAL
    Description The Starter Lockout/Tagout Kit offers a starter selection of the lockout/tagout devices every electrician/maintenance person needs, all conveniently stowed in a small nylon zipper pouch with belt loops/D-rings for easy attachment to belts, tool pouches, and tool carts. The Kit includes a Universal 277V Breaker/Single-Pole Lockout, a Universal Multi-Pole Lockout, one 3/4-inch Shackle Red Padlock, a 1-inch Safety Lockout Hasp, 2 Striped Lockout Tags with “Do Not Operate” legend, and a 110V Plug Lockout. The kit is RoHS compliant. Benefits • A starter selection of the lockout/Tagout devices every electrician/maintenance person needs • Small nylon zipper pouch features belt loops and d-rings for easy attachment to belts, tool pouches, tool carts and more Technical Information Brand: Ideal Colour: Red Pouch Colour: Black Pouch Material: Nylon Voltage: 120 Volts Dimensions: 25.4 x 20.3 x 30.5 cm Documents Ideal Product Catalog : Page# 1
    • Only 1 left in stock
    • Free shipping
  • IDEAL VDV Multimedia Cable Tester, Model 33-856
    $202.99

    IDEAL VDV Multimedia Cable Tester, Model 33-856

    IDEAL
    Description An all-in-one basic Voice-Data-Video tester for verifying proper wiring of low-voltage and data communications cables. The primary function of the VDV is the wiremap test. The wiremap test visually shows, pin by pin, whether a cable is terminated properly at both ends and if there is continuity from end to end. The VDV can test Data/Ethernet RJ-45 (8P8C), Voice/Phone RJ-11/12(6P6C/6P4C), and Video/coax cables. The LCD visually displays “PASS” or “ERROR” after each test to verify if the cable is terminated correctly. Benefits Voice/Data/Video LCD based wire mapper verifies cable continuity Identifies errors by pin: shorts, opens, miswires, reversals, and split pairs For twisted pair, coax, and phone type cables Designed for Cat 3/5/5e/6/6a cables; RG59/6/ 6 Quad RJ-45; RJ-11/12; and Female F port interfaces Tone generator with 4 selectable tones Includes main remote and 9V battery Technical Information Product Datasheet Operating Instructions Brand: Ideal Cable Composition: Coax Tester Function: Wiremap
    • In stock
    • Free shipping