Orka Clearance

Description A serious cooler that keeps cool for up to 30 hours. Not only does the Tradesman Pro Tough Box Cooler carry lunch, it also doubles as a handy place to sit. The lid on this large capacity cooler is recessed allowing space for 1-liter bottles to stand upright. A convenient compartment housed inside the lid holds smaller items such as napkins, utensils, keys, etc. Benefits Keeps cool up to 30 hours Main compartment has a 17 quart (16.1 L), 18 can capacity Supports up to 300 pounds (136.1 kg); doubles as a handy place to sit The storage compartment lid holds items like phone, medicine, keys, napkins, utensils, etc. Lid stays open at 90-degrees to allow uninterrupted access; no rust stainless steel hinged lid is recessed to accommodate 1 Liter water bottles Shoulder strap holds the lid in place while carrying and easily converts to a handle Lock hasp fits #1 Master Lock® or equivalent (not included) Technical Information Supports 300 lb Interior Lid Compartment 6-1/2'' x 4'' x 1'' (165.1 x 101.6 x 25.4 mm) Capacity: 17 qt (16.1 L) Number of Compartments: 2 Overall Length: 12'' (30.5 cm) Overall Height: 12'' (30.5 cm) Overall Width: 16.203'' (41.2 cm) Color: Gray with Orange Closure Type: Latch Handle: Yes Holds: 18 Cans Stackable: Yes Cold Temperature Range: Up to 41°F ( 5°C) for 30 Hours Insulation: Polyurethane Foam Documents Tradesman Pro™ Tough Box 17-Quart Cooler Brochure

Description Klein Tools premium KARBN™ full brim hard hats were engineered for optimal safety, cool comfort, and fit with a cutting edge design. Unique features allow the user to comfortably work in a wide variety of applications and demanding environments. Patent-pending accessory mounts on front and back ensure Klein headlamps attach securely — no straps needed! Benefits Hard Has has stylish, modern, durable hydro-dipped polymer film KARBN pattern on rugged PC/ABS composite Tested up to 20kV, this Class E Type 1 hard hat meets ANSI Z89.1-2014, CSA Z94.1-15, EN397:2012+A1:2012-5.2.4 , EN12493:2012-4.2.1.2, 4.2.1.3, 4.2.1.4 Patent-pending accessory slots on front and back ensure optional Klein headlamps attach securely and precisely, every time — no straps or zip ties needed Machine washable breathable, padded sweat-wicking sweatband and top pad improve comfort with advanced evaporative technology — simply wet and shake, for hours of cooling This model includes Klein Rechargeable Headlamp (Cat No. 56048) with charging cable Easy, one-handed adjustment with large knob ratchet mechanism even with gloves on, and soft neck pad that pivots to clear bandana knots and ponytails Universal accessory slots on both sides for attaching hearing protection, face shield and more Unique suspension system features a flexible open frame design to provide optional fit and improved air circulation Optional accessories and replacement parts (sold separately): Rechargeable Headlamps (Cat. Nos. 56048 , 56049 , 56062 ); Sweatband (Cat. No. KHHSWTBND2 ), Top Pad (Cat. No. KHHTOPPAD2 ), Suspension (Cat. No. KHHSPN2 ) and Chin Strap (Cat. No. KHHSTRP ) Technical Information Hat Style: Full Brim Type: 1 Application: Class E Special Features: Tested up to 20kV Standard: ANSI Z89.1-2014, CSA Z94.1-15, EN397:2012+A1:2012-Lateral Deformation (LD); EN12492:2012-4.2.1.2, 4.2.1.3, 4.2.1.4 Venting: No Suspension: 4-Point Suspension Adjustment: Ratchet with Pivot Shell Lining: Polyester Accessory Slots: Front, Back and Both Sides Shell Material: PC/ABS Shell Color: KARBN(tm) Pattern Hat Size: 6.5 to 8 (52 to 64 cm diameter) Bulb Type: LED Lumens: All-On/Boost: 400; Spot/High: 200; Flood/Low: 100 Batteries: Lithium-Ion Included: Hard Hat, Rechargeable Headlamp, Charging Cable, User Guide Overall Lenght: 12.5'' (31.8 cm) Overall Height: 6.5'' (16.5 cm) Overall Width: 10.7'' (27.2 cm) Weight: 1.3 lb (0.6 kg) Documents Brochure Instructions

Description The Klein Tools ET450 Advanced Circuit Tracer Kit is a professional tracer for energized and non-energized breakers, fuses, and wires. When the Transmitter is connected to a circuit, the Receiver’s sensitivity can easily be adjusted to detect the transmitted signal on breakers, fuses, and wire through drywall, cement block, and underground. Kit comes with transmitter, receiver, blade and ground prongs, alligator clips, 3-Foot and 20-Foot lead adapters, AC plug leads, instructions, all required batteries, and a hard carrying case with handle for convenient transportation and storage. Benefits The Advanced Circuit Tracer Kit provides reliable tracing of energized or non-energized breakers, fuses, and wires Easily adjust receiver sensitivity level to detect the transmitted signal through drywall, cement block, and underground Versatile applications include tracing wires, conduit or pipes, or a single wire in a bundle Audible beep and visual indicators on receiver denotes signal strength Receiver features a flashlight for illumination in low-light areas and NCV function to test if wires are energized Transmitter has AC/DC external voltage indicators of 12V, 48V, 120V, 240V, and 480V Kit comes with transmitter, receiver, blade and ground prongs, alligator clips, 3-Foot and 20-Foot lead adapters, AC plug leads, instructions, all required batteries, and a hard carrying case Technical Information Type: Circuit Tracer Application: Trace Energized and Non-Energized Breakers, Fuses, and Wires Special Features: Flashlight and NCV Function on Receiver; Accessories, and Hard Case Material: ABS and Electronic Components Batteries: Transmitter: 6 × 1.5V AA Alkaline; Receiver: 4 × 1.5V AA Alkaline Battery Life: Up to 24 hr Drop Protection: 6' (2 m) Display: Receiver: LCD with Backlight Control Type: Transmitter and Receiver Voltage: External Indicators for 12V, 48V, 120V, 240V, and 480V Frequency: Transmitter: AC 45Hz to 65Hz; Receiver: 33kHz Ingress Protection: IP42 Pollution Degree: 2 Tests Continuity: No Integral Lead Storage: No Interchangeable Leads: Yes Lead Length: 3' (1 m) and 20' (6.1 m) Standard: CAT III 600V Case Included: Yes Included: Transmitter, Receiver, Blade and Ground Prongs, Alligator Clips, 3' and 20' Lead Adapters, AC Plug Leads, Instructions, All Required Batteries, and Hard Carrying Case Overall Length: Receiver: 7.05'' (17.9 cm); Transmitter: 8.72'' (22.2 cm) Overall Height: Receiver: 1.84'' (4.5 cm); Transmitter: 1.51'' (3.9 cm) Overall Width: Receiver: 3.90'' (9.9 cm); Transmitter: 2.07'' (5.3 cm) Weight: Transmitter: 16.5 oz (470 g); Receiver: 11 oz (312 g) Document Brochure Instructions

Description The LUNA 4" fixture, is a 12 watt, recessed light fixture for retrofit, remodel or new construction applications with 360-degree rotation and 30-degree tilt. It is a high-performance, easy to install residential grade downlight solution that offers good light output, energy-efficiency and streamlined design. Suitable for wet locations. Available here in a 4-pack with an OnCloud dimmer for Wi-Fi control through the WiZ app to create scenes, set schedules and connect with smart speakers. ***The On Cloud Dimmer only works for single pole applications.*** Features Durable airtight aluminum body with adjustable regressed gimbal. Includes anodized blue heat sink to provide maximum airflow for the LED light source General application light fixture featuring a 12 watt LED module that maintains uniform intensity producing up to 700 lumens, with a typical CRI of 90 Available in 3000k color temperatures 100%-10% dimming capability. This fixture is compatible with industry standard forward-phase / reverse-phase and TRIAC/ELV dimmers Fixture lens provides 38° beam spread Includes two spring loaded clips to attached to any ceiling material Extruded aluminum hardwire box with 300mA dimmable class II electronic LED driver with 100-135V AC input. Includes an 18" FT6 rated cable with DC 2.1 connector between driver and fixture approved for use in plenums and suspended ceilings Three "quick connect" push-in terminals for fast and easy wiring Operating Temperature from -20°C to 40°C (-4°F to 104°F) Suitable for wet locations Approved for direct contact with insulation Technical Information Application: Ceiling Recess Mount Approved Location: Wet / Insulated Ceilings Beam Angle: 38° CCT: 3000 K to 2000 K Certification: cETLus Class II: Yes Colour: White CRI: 90 Dimming: Yes Dimming Tech: Forward/reverse-phase - TRIAC/ELV Energy Star: Yes Hole Cut: Ø 4¼ " (108mm) Input: 100-135V AC, 60Hz Lumens: Up to 700 Lumens per Watt: Up to 59 Power Factor: 0.9 Projected Life: 70% @ 50,000 hrs Warranty: Lifetime Wattage: 12W Document Brochure Specification Sheet

Description The SLMT4-8W is an 8 watt 4" round downlight for retrofit application onto existing 4" recessed housings or 4" octagon box. It is a high-performance, easy to install residential grade downlight solution that offers good light output, energy-efficiency and streamlined design. Suitable for wet locations. Features Durable airtight plastic body with mounting holes and included butterfly clips. On-face magnets allows for securely attaching one of three included dead front magnetic faceplates (White, Black and Silver) This general application light fixture features an 8 watt LED module that maintains uniform intensity producing up to 560 lumens, with a typical CRI of 90. Available with 5 step CCT switch 2700 K, 3000 K, 3500 K, 4000 K and 5000 K 100%-10% dimming capability. This fixture is compatible with industry standard forward/reverse phase dimmers, Triac/ELV dimmers The lens provides 110° beam spread Can be mounted to a compatible 4" recessed housing via included butterfly clips, or attached to an industry standard 4" octagon box with minimum depth of 1.5" (40 mm) via mounting holes. Compatible with those recessed housings: RF401, RF402 and RF405 series Built-in on board driver with 40mA output and 100-135V AC input "Quick connect" push-in terminals for fast and easy wiring -30°C to 40°C (-22°F to 104°F Suitable for wet locations fire-rated when used in a fire-rated octagon box Technical Information Application: Recessed / Flushmount / Downlight Approved Location: Wet Beam Angle: 110° CCT (Selectable): 2700 K / 3000 K / 3500 K / 4000 K / 5000 K Certification: cETLus Color: Black, Silver and White CRI: 90 Dimming: Yes Dimming Tech: Forward/Reverse phase / TRIAC/ELV Energy Star: Yes Hole Cut Size: Ø 43⁄16" (106mm) Input: 100-135V AC, 60Hz LM79: Yes LM80: Yes Lumens: Up to 560 Lumens per Watt: Up to 70 Power Factor: 0.9 Projected Life: 70% @ 50,000 hrs Warranty: Lifetime Wattage: 8W Document Brochure Specification Sheet Installation Compatible Dimmers

Description The air you breathe should be one of the purest elements going into your body. WhisperAir Repair™ by Panasonic ensures it is. Until now, Panasonic exclusive nanoe™ X air purification technology was available only in their HVAC systems. Now, nanoe™ X is availalbe in WhisperAir Repair™ , a compact ceiling-mount air purifier that keeps indoor air clean and fresh around the clock. Wether updating old ventilation fans, remodeling entire spaces or building new construction, bolster your ventilation strategy with WhisperAir Repair™ for better indoor air quality and healthier living. Features Utilizes patented nanoe™ X charged water particle generation technology to purify contaminated air Inhibits growth of allergens, and breaks down hazardous substances for improved occupant health*¹ Quietly deodorizes and removes unwanted smells for a fresher, cleaner indoor environment*¹ Maintenance free with no filters to change, no duct work required Great for use in residential settings including living rooms, bedrooms, basements, closets and mud rooms Ideal for light commercial applications, hotels, educational facilities, elevators, subway cars, restaurants and other public spaces Purification device provides effective odour and allergy reduction Easily mounts into virtually any ceiling and can use existing wiring Energy efficient, space-saving design Stylish paintable low-profile grille blends with any room aesthetics * 1 WhisperAir Repair's impact on odours, allergens, pollens and hazardous substances was based on testing in a 812ft³/23m³ room. Technical Information Air Volume: (CFM) 9 Noise (sones): <0.3* Power consumption (Watts): 4 Speed (RPM): 1510 Current (Amps): 0.04 Power rating (V/Hz): 120/60 Net Weight (Lb/kg): 3.1/1.4 *Radiated Sound Testing conducted in an anechoic chamber, 3-microphone array with placement 3ft/1m above, below and to the side of the product. Document Data Sheet Installation Manual Brochure

Description Leviton 1 Gang Midway Decora/ GFCI device Wallplates give a simple clean aesthetic look; with rounded edges and a smooth finish making it dust resistant. These wall plates easily blend in with any décor, are easy to install and economically priced. Benefits Unbreakable Thermoplastic Nylon Midway Size - Full 0.375" taller and wider than standard wallplates Can be mounted onto larger outlet boxes and used to hide wall irregularities Wall plate screws included Device Mount Technical Information Color: White Gang: 1 Material: Nylon Mount: Device Size: Midway Standards and Certifications: UL/CSA

Description SpliceLine In-Line Wire Connector is a crimp-free, solderless push-in butt splice. It is easy to fit through 1/2 in. knockout due to its slim design and perfect for lengthening wire. Benefits • Faster alternative to traditional butt splices • 12 AWG - 20 AWG • Crimp-free, solderless push-in butt splice • Slim design easily fits through 1/2 in. knockout • Perfect for lengthening wire • Transparent polycarbonate housing for visual inspection of connection • Approved for bonding and grounding applications Technical Information Brand: Ideal Model: 60 Colour: Gray Maximum Rated Voltage: 600 V Material: Thermoplastic Polyester Minimum Wire Gauge: 20 AWG Maximum Wire Gauge: 10 AWG SpliceLine-42 Documents Product Specifications Sheet Installation Instructions

Description This adapter is designed for installations that require the RWF heater to be installed on the surface of the wall instead of recess. It is made of steel with epoxy painted grill. Works with Stelpro/Pulsair RWF fan-forced heater only.

Description 1-Pole Built-In thermostat for Stelpro/Pulsair RWF fan-forced heater.

Description If you are looking to use a convection heater for the first time, then the Apéro is the perfect unit to start with. Simple in both style and in operation, the Apéro is an efficient heater that will warm your room quietly and consistently. Benefit from the built-in digital thermostat that is ultra-precise as well as the option to program the heater to suit your needs. When simplicity and efficiency are what you are looking for, install an Apéro today. Features The X-shaped element design allows for optimum heat transfer to maximize the efficiency of the heater. Durable steel construction with a powder coated finish for a long-lasting product Be in control with a tamperproof, lockable built-in digital thermostat. Equipped with a built-in thermal sensor, located 4 inches from the floor, that detects the coldest air and heats accordingly Technical Information Product Finish: Charcoal Wattage: 2000/1500w Voltage: 240/208V BTU: 6824/5118 Depth: 4in Height: 17.5in Width: 29.13in Remote Control: No Built-in Thermostat: Yes Automatic Shut-Off: Yes Power Source: Electric Warranty: 2-years against all manufacturing defects 5-years on heating elements Document Brochure Installation Manual

Description Caseta Wireless by Lutron provides easy and reliable control of your lights, shades, and temperature from the free Lutron app. This kit includes everything you need to get started for simple and personalized control of lighting throughout your home. Experience superior dimming performance of new LED bulbs conveniently control lights with the touch of a button from your bedside or couch, schedule lights to automatically adjust or even control lights and scenes with your voice via Alexa and Siri. Benefits Replaces one wired switch UL listed to dim over 600 different LED light bulbs Patent-pending technology ensures superior performance with dimmable LEDs, as well as halogen and incandescent bulbs Different light bulb types can be used with the same dimmer Pico Remote - features a 10-year battery life Includes (1) Smart Bridge and App, with HomeKit technology (1) In-Wall Smart Dimmer with Wallplate and (1) Pico Remote Documents INSTALLATION: How To Install your Dimmer

Description The Leviton Decora SureSlide dimmer with Preset switch allows you to easily modify the brightness of your Incandescent, and dimmable LED and CFL lights with the touch of a finger. It's on/off switch allows you to retain your preferred dimming settings, while providing you with a simple and easy way to enhance the atmosphere in your home. It's white classic clean finish gives it an appealing look when added with any decor. Benefits 600W-120VAC Incandescent, 150W-120VAC Dimmable LED and CFL, 60Hz Single Pole and 3-Way Pack of Two Decora SureSlide Dimmers CSA and UL listed Technical Information Brand: Decora Style: Sureslide Color: White Type: Electro-Mechanical Frequency: 60 Hz Load Rating: 600W Incandescent, 150W LED and CFL Load Type: Incandescent, Dimmable LED, Dimmable CFL NEMA SSL 7A: Yes Protection: Radio/TV Filter Switch Type: Single-Pole & 3-Way Voltage: 120 VAC

Description The DVAKS100CG is a versatile weatherproof fixture for ceiling applications. Ideal for commercial and residential applications. Benefits Threaded, precision die-cast aluminum fitter with a silicone gasket between wiring box and the fitter Precision die-cast aluminum box with four 1/2" NPT plugs installed and one open 1/2" threaded conduit opening on the top Porcelain medium base socket with nickel-plated screw shell Clear glass with threaded neck Threaded die-cast aluminum guard with a set screw for locking guard in place Technical Information Model: DVAKS100CG Finish: Aluminum Certifications: UL Documents Specification sheet

Description Use the combination drill/tap bit to complete hole drilling, tapping and deburring/countersinking tasks with your power drill. The bit is made of hardened high-speed steel for durability. Benefits Complete hole drilling, tapping and deburring/countersinking in one operation with power drill saves labor and time Back tapered beyond tap to prevent thread damage from over-drilling Deburr/countersink also provided on bit beyond back taper Made from hardened high-speed steel vs. carbon steel for longer life High quality hex shank to ensure strong connection to drill chuck Designed to tap up to 10-gauge metal Quick change adaptor included in both metric and standard kits Technical Information Brand: Greenlee Material thickness: 10 gauge Material type: mild steel, copper, brass, aluminum Shank: 1/4" quick change hex Drill Material: hardened high speed steel Drill point: split point with web thinning Size: 8-32NC

Description Add hands-free control to the lists of Caseta lighting control options. Lutrons' vacancy smart motion sensor is a wireless, battery-operated, passive infrared (PIR) sensor that automatically controls lights via RF communication to compatible dimming or switching devices. These sensors detect the heat from people moving within an area to determine when the space is occupied. Combine both convenience and exceptional energy savings along with ease of installation with Lutron Caseta motion sensors. Benefits Vacancy sensor (Manual-on, Auto-off) Infrared motion detection with exclusive Lutron XCT Technology detects minor motion Vacancy model meets CA Title 24 requirements Timeout, Activity, and Auto-On settings available Easy Installation and accessible test buttons make setup easy Lens illuminates during test mode to verify ideal locations Multiple sensors can be added for extended coverage 180° field view For indoor use only. Perfect for bathrooms, laundry rooms, hallways, garages, and more – no wires required. 10-year battery life For use with Lutron Caseta products only Technical Information Specification sheet Specification sheet FR Regulatory Approvals: cULusR listed, FCC certified, IC certified, IFT certified, Meets CA (U.S.A.) Energy Commission Title 24 requirements Power/Performance: Operating voltage: 3 V- Operating current: 14 μA nominal Requires one CR 123 lithium battery Battery life: 10-year battery-life design Non-volatile memory (saved changes are stored during power loss) Temperature: 32 °F to 104 °F (0 °C to 40 °C) Relative humidity: less than 90% non-condensing RF Range: Distance between local load controls and sensor should not exceed 60 ft (18 m) line-of-sight or 30 ft (9 m) through walls 180° field of view: Minor motion = 15 x 2 x 35 = 1050 ft2 (97.5 m2), Major motion = 20 x 2 x 45 = 1800 ft2 (167.2 m2)

Description This Leather Tool pouch is handcrafted in Canada and offers an ergonomic compact design for superior support. It can be worn on a belt, with a shoulder strap or as a hand pouch. Benefits Features 12 individual tool pockets, a multi-purpose loop (holds a tape measure, etc), and an electrical tape-chain Conforms to the contours of your leg when worn on a belt, and features an extended base cap protects your leg from tool points Constructed with rust-resistant, plated-steel hardware and heavy, lock-stitched nylon thread for long-term durability Compact, ergonomic design for superior comfort Can be carried three ways - on a belt, with a shoulder strap, or as a hand-pouch Shoulder strap/belt sold separately Technical Information Brand: Ideal Colour: Beige Pockets: 12 Material: Standard Leather Dimensions: 6.5”W x 3”D x 13”H

Description These photocontrols are provided with a swivel arm for easy and flexible installation to standard outdoor light fixtures or electrical boxes. Features Mechanical bimetal switch with Cadmium Sulfide photocell Delay feature prevents unwanted OFF switching High strength, UV resistant plastic housing Swivel with 1⁄2"-14 NPSM threaded stem Washer gasket and locking nut included #18 AWG, 6" wire leads Technical Information Sensor Time Delay: 30 sec to 90 sec Photocell Type: Cadmium Sulfide Photo Control Switch Type: Mechanical Bimetal Fail Mode: ON Activation On: 1 to 5 fc Activation Off: 3 to 15 fc Photocontrol Type: Thermal Application Compatibilities: HID; Fluorescent; Incandescent Photocontrol Style: Stem and Swivel Mount Photocontrol Sensor Location: Side Product Height (in) :5 Product Height (mm): 139.7 Product Width (in): 1 9/16 Product Width (mm): 39.7 Product Depth (in): 1 9/16 Product Depth (mm): 39.7 Wire Lead Length (in): 6 Wire Lead Length (mm): 152 Wire Size Max: #18 AWG Cover Color: Gray Housing Material: Polycarbonate Load Ratings Magnetic Ballast Range(s): 8.3 A, 1000 VA Tungsten Range(s): 15 A, 1800 W Wiring Option: Wire leads Input Voltage Range(s): 120 VAC, 50/60 Hz Expected Lifetime (Years): 5 Expected Lifetime (Operations): 3650 Temperature (operation): -40°C..70°C Usage Environments: Outdoor Country of Origin (Intermatic): MEXICO Warranty Period: 2-Year limited Document Technical Sheet Instruction

Description Round Black trim for the SlimLED fixtures. ***Trim only Document Brochure Spec Sheet

Description Leviton's Load Center are a must for your Smart home. Install the LDATA in your Leviton panel to make it smart. You can choose between Wi-Fi or Ethernet connection options for remote monitoring and tripping capabilities, remote firmware updates and more. It works with Leviton's SMART circuit breakers. You will need the My Leviton app to control your load center. *** You will need a separate circuit for the Hub. Please plan ahead!*** Benefits EASY - Install into your Leviton Load Center to make it smart SMART - Wi-Fi® or Ethernet connection options for remote monitoring and tripping capabilities, remote firmware updates and more INTUITIVE - My Leviton offers single app control of the control of the Leviton Smart Load Center and the Decora Smart™ Wi-Fi® product lines Technical information Amperage: 15a and 20a Voltage: 120v Pole: 1 Documents Starting Guide Smart Breakers User Guide Load Center Line Card Load Center Product Brochure

Description The SlimLED Puck is an ultra-thin, easy to install, accent fixture that offers the flexibility to link multiple fixtures together and easily swap the color trim on-site. Thin enough to surface, and available for recess installation, the SlimLED Puck provides great illumination for accent or task lighting applications. Features Frosted lens providing even light distribution and low heat dispensation Magnetic face plate. Interchangeable with optional color (sold separately) Available in warm white (3000°k), providing 120 lumens per fixtures, 120° beam spread 100%-10% dimming capability. Included driver not dimmable. Use compatible 12v driver to achieve dimming functionality (Sold separately) Each fixture provided with a male and female low voltage connector jacks for easy linking, providing a maximum linking distance of 52" between fixtures Can be surface or recess mounted. Kit includes 3- Slim LED pucks 3- White Magnetic faceplates 1- 15w plug-in driver with 6' cord 1- 5-port wiring hub 1- Rotary switch Mounting Hardware Technical Information Application: Under Cabinet Approved Location: Damp Beam Angle: 120° CCT: 3000 K Certification: cULus Class II: Yes Color: WH CRI: 90 Dimming: Yes (Require extra part sold separately) Hole Cut: Ø 2¼ " (57mm) Input: 100-135V AC, 60Hz Lumens: Up to 120 (per light source) Lumens per Watt: Up to 60 Projected Life 70% @ 25,000 hrs Warranty: 3 Years Wattage: 2W (per light source) Document Specification Sheet Brochure Instruction

Description 3M™ ScotchCode™ Wire Marker Tape Dispenser is a compact, carry-along dispenser that provides a fast, convenient system for marking wires, cables or hoses. It includes a special end loop to hook the unit on a belt or tool pouch. The pre-printed tapes have a high-tack, acrylic adhesive to resist solvents, oil and water while adhering firmly to insulation surfaces. This dispenser includes one of each zero through nine numbered 3M™ ScotchCode™ Wire Marker Tape Rolls. Features Compact and lightweight dispenser is designed for easy handling Easy to refill, holds up to 10 different rolls Dispenser is filled with 10 rolls of pre-printed marker tape, one each of numbers zero '0' to nine '9' Durable plastic construction Features an end loop to easily suspend it from a tool pouch or belt RoHS 2011/65/EU Compliant Operating temperatures from -40°F to 250°F (-40°C to 121°C) Technical Information Adhesive Material: Acrylic Colour Family: Red Kit Includes: Dispenser filled with numbers 0 thru 9 Legend: "0" through "9" Marker ID Style: Pre-printed Marker Type: Dispenser Material: Plastic Maximum Insulation Outer Diameter (Metric): 3.7 mm Maximum Insulation Outside Diameter: 0.145 in Maximum Operating Temperature (Celsius): 121.0 °C Maximum Operating Temperature (Fahrenheit): 250.0 °F Overall Length (Metric): 2.4 m Overall Width (Metric): 5.46 mm Printed Text Type: Numbers - 0-9 Product Type: Tape Dispenser Refill: Tape Roll Refillable: Yes RoHS EU Comments: RoHS 2011/65/EU compliant without exemption Tape Colour: White UV Resistant: No

Description White Square trim for the SlimLED 4" fixtures. ***trim only Document Brochure Spec Sheet

Description Elevating the LUNA that you know and love to have white tunability through Wi-Fi while still keeping great features like WET location rating, 360-degree rotation and 30-degree tilt. Features Durable airtight aluminum body with adjustable regressed gimbal. includes anodized blue heat sink to provide maximum airflow for the LED light source This general application light fixture features a 12 watt LED module that maintains uniform intensity producing up to 850 lumens, with a typical CRI of 90 Tunable White 2700 k to 5000 k color temperatures 100%-10% Wi-Fi dimming capability. Dimming controlled via WiZ App and Room Controller Fixture Lens provides 38° beam spread Includes two spring loaded clips to attached to any ceiling material Extruded aluminum hardwire box with 12 watt (300 mA) Wi-Fi dimmable LED driver with 100-135V AC input. Includes an 18" wire with 3-Pin DC connector between driver and fixture Can be controlled via the WiZ App (works with iOS and Android) from anywhere. Voice control can also be achieved by integrating the app with most smart speakers. Works with Google Assistant, Siri, Alexa and IFTTT Three "Quick Connect" push-in terminals for fast and easy wiring Minimum starting temperature of -40°C (-40°F) Suitable for Wet locations Approved for direct contact with insulation Suitable for indoor/outdoor applications Technical Information Application: Ceiling Recess Mount Approved Location: Wet / Insulated Ceilings / Indoor / Outdoor Beam Angle: 38° CCT: Tunable White (2700 K - 5000 K) Certification: cETLus Class II: Yes Colour: Black CRI: 90 Dimming: Yes Dimming Tech: Wi-Fi Dimming (via WiZ App) Energy Star: Yes Hole Cut: Ø 4¼ " (108mm) Input: 100-135V AC, 60Hz Lumens: Up to 850 Lumens per Watt: Up to 71 Power Factor: 0.9 Projected Life: 70% @ 50,000 hrs Warranty: 3-Year Wattage: 12W Document Specification Sheet Installation

Description Designed with high-speed tool steel that can tap up to 10-gauge metal this kit offers complete hole drilling, tapping, and deburring/countersinking in a single operation when paired together with a power drill. Features back-tapered bits to avoid damage caused by over drilling, as well as a high-quality hex shank that ensures a secure connection to drill. Included in Set DTAP6-32 6-32NC Drill/Tap Bit DTAP8-32 8-32NC Drill/Tap Bit DTAP10-24 10-24NC Drill/Tap Bit DTAP10-32 10-32NF Drill/Tap Bit DTAP12-24 12-24NC Drill/Tap Bit DTAP1/4-20 1/4-20NC Drill/Tap Bit Benefits Complete hole drilling, tapping and deburring/countersinking in one operation using power drill to save time and labor Back tapered beyond tap to prevent thread damage from over-drilling Made from hardened high-speed steel versus carbon-steel for longer life High quality hex shank to ensure strong connection to drill chuck Designed to tap up to 10 gauge metal Quick change adaptor included Technical Information Brand: Greenlee Size: 6-32 to 1/4-20 Shank: 1/4" Quick Change Hex Product Dimensions: 25.4 x 25.4 x 30.48 cm Documents Datasheet

Description 3M™ ScotchCode™ Wire Marker Tape Refill Roll is a polyester film tape that is printed with consecutive numbers for easy identification. It is ideal for marking all types of wire and cable including power, fibre optic, electronic and telecommunications. The tape has an acrylic, pressure-sensitive adhesive and withstands temperatures of -40 to 250 degrees Fahrenheit (-40 to 121 degrees Celsius). This refill includes 1 roll of 3M™ ScotchCode™ Wire Marker Tape printed with the number Three '3'. 3M™ ScotchCode™ Wire Marker Tape can be used for marking all types of wire and cable including power, control, fibre optic, electronic, telecommunications and instrumentation. Features Compatible with 3M™ ScotchCode™ Tape Dispenser for convenient usage Non smear, high tack Polyester film tape with an acrylic pressure sensitive adhesive resists solvents, oil and water Smooth surface allows buildup to be easily wiped off Operating temperatures from -40°F to 250°F (-40°C to 121°C) Printed with number "3" RoHS 2011/65/EU Compliant Tensile strength rating of 17 lbs. (7.71 kg) per inch meets professional electrical standards This thin and conformable tape meets ASTM D-1000 standard test methods, making it great for industrial electrical applications Technical Information Adhesive Material: Acrylic Applications: Marking Wire and Cable Brand: 3M™ Dispenser/Marker Type: Tape Roll Refill Legend: 3 Legend Colour: Black on White Marker ID Style: Pre-printed Marker Type: Dispenser Material: Plastic Maximum Insulation Outer Diameter (Metric): 3.7 mm Maximum Insulation Outside Diameter: 0.145 in Maximum Operating Temperature (Celsius): 121 °C Maximum Operating Temperature (Fahrenheit): 250 °F Maximum Recommended Voltage Rating: 600 V Overall Length (Metric): 2.4 m Overall Width (Metric): 5.46 mm Printed Text Type: Number - 3 Product Type: Identification Refill Tape Roll Shelf Life: 24 Months Solution for: Access Network: xDSL Access Network: FTTH/FTTB/CATV Wireless Network: Backhaul Longhaul/Metro Loop Network: Outdoor Longhaul/Metro Loop Network: CO/POP Tape Colour: White UV Resistant: No Voltage Application: Low Voltage

Description The IDEAL Orange Wiretwist Connectors are made in Canada. The C3 are good from 18 to 14 AWG cables. (min. 1x14 AWG + 2x18 AWG / max. 1x10 AWG + 2x14 AWG) Comes in a package of 100 connectors. Features Made in Canada Heavy gauge outer shell for superior dielectric performance Stay set spring with enhanced corrosion resistance No pre-twisting required CSA Certified (CSA 22.2 #188 Certified) and UL Listed for 600V maximum building wire^ and 1000V maximum for signage/fixture applications Wire combinations from 18 to 14 AWG (min. 1x14 + 2x18 / max. 1x10 + 2x14) Cu/Cu only Operating temperature up to 105 ºC / 221 ºF Flame-retardant shell Technical Information Twist-On Style: Non-Wing Termination Method: Twist-On Color: Orange Minimum Wire Gauge: 18 AWG Maximum Wire Gauge: 14 AWG Maximum Rated Voltage: 600V Quantity: 100/pack

Description This Leviton Screwless Wallplate (Grey) is durable and easy to install. Their modern look will make your rooms very chic. Installing them is so simple, it is the perfect item to quickly upscale your home. Benefits Screwless, snap-on design for contemporary architectural styling Complete kit includes screwless snap-on wallplate and subplate Constructed of durable polycarbonate to withstand abuse Subplate provides an easy, convenient wallplate installation with proprietary flat head combination head screws held captive Accent any wall covering with wide selection of colors Designed with top and bottom ratchets on single/multi-gang configurations and side ratchets on multi-gang configurations for a secure fit 1-6 Gang screwless wallplates each paired with a dedicated subplate for fast and easy installation Backed by Leviton’s Limited Ten-Year Warranty Technical Information Other Colors Available: White, Grey, Black, Brown, Ivory, Light Almond Gang: 2 Material: Polycarbonate Mount: Snap-On Size: Standard Standards and Certifications: ETL Type: Screwless Warranty: 10-Year Limited Document Product Bulletin

Description Experience the ultimate comfort and convenience with the NEW Caseta Wireless Smart Fan Speed Control. This fan control gives you the ability to turn your fan on/off or choose between four speeds for increased comfort. Eliminate your pull chains - use with the wireless Fan Pico remote (PJ2-3BRL-GXX-F01, sold separately) for control from anywhere around your home. For increased versatility, add the Smart Bridge (L-BDG2-WH, sold separately) and use it with the FREE Lutron app to set up your favorite scenes and create schedules based on time of day. Benefits Neutral wire required Single pole Replaces an existing switch, installs in 3 easy steps and takes about 15 minutes Use Pico remote for multi-location setup Favorite button for preferred fan speed Works with other Smart Home brands, including Amazon Alexa, the Google Assistant, and more Documents INSTALLATION: How to Install your Fan Control

Description 3M™ ScotchCode™ Wire Marker Tape Refill Roll is a polyester film tape that is printed with consecutive numbers for easy identification. It is ideal for marking all types of wire and cable including power, fibre optic, electronic and telecommunications. The tape has an acrylic, pressure-sensitive adhesive and withstands temperatures of -40 to 250 degrees Fahrenheit (-40 to 121 degrees Celsius). This refill includes 1 roll of 3M™ ScotchCode™ Wire Marker Tape printed with the number two '2'. 3M™ ScotchCode™ Wire Marker Tape can be used for marking all types of wire and cable including power, control, fibre optic, electronic, telecommunications and instrumentation. Features Compatible with 3M™ ScotchCode™ Tape Dispenser for convenient usage Non smear, high tack Polyester film tape with an acrylic pressure sensitive adhesive resists solvents, oil and water Smooth surface allows buildup to be easily wiped off Operating temperatures from -40°F to 250°F (-40°C to 121°C) Printed with number "2" RoHS 2011/65/EU Compliant Tensile strength rating of 17 lbs. (7.71 kg) per inch meets professional electrical standards This thin and conformable tape meets ASTM D-1000 standard test methods, making it great for industrial electrical applications Technical Information Adhesive Material: Acrylic Applications: Marking Wire and Cable Brand: 3M™ Dispenser/Marker Type: Tape Roll Refill Legend: 2 Legend Colour: Black on White Marker ID Style: Pre-printed Marker Type: Dispenser Material: Plastic Maximum Insulation Outer Diameter (Metric): 3.7 mm Maximum Insulation Outside Diameter: 0.145 in Maximum Operating Temperature (Celsius): 121 °C Maximum Operating Temperature (Fahrenheit): 250 °F Maximum Recommended Voltage Rating: 600 V Overall Length (Metric): 2.4 m Overall Width (Metric): 5.46 mm Printed Text Type: Number - 2 Product Type: Identification Refill Tape Roll Shelf Life: 24 Months Solution for: Access Network: xDSL Access Network: FTTH/FTTB/CATV Wireless Network: Backhaul Longhaul/Metro Loop Network: Outdoor Longhaul/Metro Loop Network: CO/POP Tape Colour: White UV Resistant: No Voltage Application: Low Voltage

Description When it comes to limiting potential water damage in your home, timing is everything. That’s why Kidde designed the Water Leak + Freeze Detector with smart features to alert you to water leaks or temperatures approaching freezing as soon as a situation develops – even when you aren’t at home. Simply place the devices in areas that are at a high risk for water damage or freezing. They’ll emit a loud beep and connect with the Kidde app to send a notification to your phone, giving you the time you need to take action – and to help you stay ahead of major damage. As a trusted leader in fire safety for over 100 years, adding additional home safety detection to our family of products was the logical next step. The Kidde Water Leak + Freeze Detector comes equipped with the Kidde HomeSafe feature that connects it and all Kidde smart devices to the Kidde app for increased functionality. It gives you the confidence and control to help keep your home protected, even when you’re not there. And it’s all from the #1 most installed fire safety brand in North America. Features Remote Notification and Status. With the app, you'll receive mobile alerts if hazards are detected or to know when the device needs to be replaced. Early detection. Detects leaks, flooding or if the temperature starts approaching freezing, so you can take steps to avoid damage. Simplify setup. Just scan the QR code on the back of each product. No additional hub is needed to set up your Kidde smart devices. Battery powered. Technical Information Interconnect: No Sounds and Warnings: Water presence, Low Temperature, Rapid temperature change Power Source: 2 AA battery powered (Included) Waterproof Level: IP65 Audio alarm: 85db at 1.2m Temperature range: 0°C (32°F) to 40°C (104°F) Humidity Range: ≤90% relative humidity (RH), non-condensing Water Depth detection capability: > 0.38mm in depth Connectivity: 802.11b/g/n (2.4GHz) Wi-Fi Weight: 0.07Kg Warranty: 1-year (Batteries not included) Document Datasheet Manual