Box Extenders

Description Arlington’s non-conductive box extenders, extend set back metal or non-metallic electrical boxes up to 1-1/2 inches, the easy way. They work with any single gang device and most steel and non-metallic outlet boxes, providing a level, fully supported wiring device that’s flush with the wall surface. ***Screws are not included, you will need mechanical screws 6-32 long enough for your application *** Benefits Prevents steel boxes from arcing and shorting by creating a barrier between the box and device screws BE1 single gang box extenders are trimmable for use in multiple boxes 2-hour fire rating Complies with NEC 2017, article 314.20 for set back boxes Can be installed without removing device wires Some bulkier devices may not fit. (GFCI Receptacle, USB Charger receptacles, Some Dimmers) Technical Information Model: BE1 Outer Height: 4.188" Screw Distance: 3.281" Outer Width: 2.313" Inner Height: 2.672" Inner Width: 1.667" Inner Depth: 1.813" Colour: White Material: Plastic Trade Size: 1-Gang Documents Brochure Instruction sheet BE1 Line Drawing

Description Arlington non-conductive box extenders, extend set back metal or non-metallic electrical boxes up to 1-1/2 inches, the easy way. They work with any single gang device and most steel and non-metallic outlet boxes, providing a level, fully supported wiring device that’s flush with the wall surface. ***Screws are not included, you will need mechanical screws 6-32 long enough for your application*** Benefits Prevents steel boxes from arcing and shorting by creating a barrier between the box and device screws Complies with NEC 2017, article 314.20 for set back boxes Functions with all standard devices, switches, and GFCIs 2-hour fire rating Manufactured from 105°C continuous use 94V0 rated flame retardant plastic for safer installations Some bulkier devices may not fit. (GFCI Receptacle, USB Charger receptacles, Some Dimmers) Technical Information Model: BE2 Outer Height: 4.188" Screws Height Distance: 3.281" Outer Width: 4.125" Inner Height: 2.672" Inner Width: 3.479" Inner Depth: 1.813" Colour: White Material: Plastic Trade Size: 2-Gang Documents Brochure Instruction sheet BE2 Line Drawing

Description Arlington non-conductive box extenders, extend set back metal or non-metallic electrical boxes up to 1-1/2 inches, the easy way. They work with any single gang device and most steel and non-metallic outlet boxes, providing a level, fully supported wiring device that’s flush with the wall surface. ***Screws are not included, you will need mechanical screws 6-32 long enough for your application *** Benefits Prevents steel boxes from arcing and shorting by creating a barrier between the box and device screws Complies with NEC 2017, article 314.20 for set back boxes Functions with all standard devices, switches, and GFCIs 2-hour fire rating Manufactured from 105°C continuous use 94V0 rated flame retardant plastic for safer installations Larger flange provides extra device support when the wall opening is miscut or oversized Accommodate midi or jumbo cover plates Trimmable along the perforated flange for use with standard plates Some bulkier devices may not fit. (GFCI Receptacle, USB Charger receptacles, Some Dimmers) Technical Information Model: BE3 Outer Height: 4.188" Screws Height Distance: 3.281" Outer Width: 5.937" Inner Height: 2.672" Inner Width: 4.9" Inner Depth: 1.813" Color: White Material: Plastic Trade Size: 3-Gang Documents Brochure Instruction sheet BE3 Line Drawing

Description Arlington’s non-conductive box extenders, extend set back metal or non-metallic electrical boxes up to 1-1/2 inches, the easy way. They work with most 3 1/2'' and 4'' octagonal boxes, providing a level, fully supported wiring device that’s flush with the wall surface. ***Screws are not included, you will need mechanical screws 6-32 long enough for your application *** Benefits Complies with 2017 NEC Article 314.20 Extends box up to 1-1/2” to bring it level with ceiling surface Trims to accommodate shallow boxes or to avoid obstructions Manufactured from 105°C continuous use 94V0 rated flame retardant plastic for safer installations Technical Information Model: BE-1R Height: 4.850'' Width: 4.350'' Colour: White Material: Plastic Documents Brochure Catalogue page Line Drawing

Description Arlingtons' Recessed TVBU507GC non-metallic combination power and low voltage TV BOX is the secure, easy way to mount a flat-screen TV flush against a wall. It features power in one side; low voltage in the other for Class 2 wiring of the satellite, cable TV, speakers, surround sound systems and more. Benefits Plugs and connectors stay inside the two-gang box, without extending past the wall Non-metallic box with paintable white trim Easy to install - secure installation in walls up to 1-1 /2" thick Mounting wings hold box securely against the wall in rework projects Boxes screw-mount to stud in new construction Low voltage divider included Can be used with Arlington's SCOOP series entrance plates and hoods cUL listed Technical Information Model: TVBU507GC Height: 6.818" Width: 7.930" Colour: White Material: Plastic Documents Specification Sheet TVBU507 Line Drawing

Description Arlington’s non-conductive box extenders, extend set back metal or non-metallic electrical boxes up to 1-1/2 inches, the easy way. They work with any single gang device and most steel and non-metallic outlet boxes, providing a level, fully supported wiring device that’s flush with the wall surface. Benefits Prevents steel boxes from arcing and shorting by creating a barrier between the box and device screws BE1 single gang box extenders are trimmable for use in multiple boxes 2-hour fire rating Complies with NEC 2017, article 314.20 for set back boxes Can be installed without removing device wires Some bulkier devices may not fit. (GFCI Receptacle, USB Charger receptacles, Some Dimmers) Screws are included in this kit Technical Information Model: BE1BAG Outer Height: 4.188" Screw Distance: 3.281" Outer Width: 2.313" Inner Height: 2.672" Inner Width: 1.667" Inner Depth: 1.813" Colour: White Material: Plastic Trade Size: 1-Gang Documents Brochure Instruction sheet BE1 Line Drawing

Description The DEX-5 extension ring is made of die-cast aluminum with four 1/2” conduit entries. Benefits The package includes extension ring and 4 plugs Weather-resistant Ideal for industrial and commercial use Technical Information Model: DEX-5 VXJ Knockouts: 4 X1/2 Inch Finish: Aluminum Certifications: UL Documents Specification sheet

Description Arlington non-conductive box extenders, extend set back metal or non-metallic electrical boxes up to 1-1/2 inches, the easy way. They work with any single gang device and most steel and non-metallic outlet boxes, providing a level, fully supported wiring device that’s flush with the wall surface. ***Screws are not included, you will need mechanical screws 6-32 long enough for your application *** Benefits Prevents steel boxes from arcing and shorting by creating a barrier between the box and device screws Complies with NEC 2017, article 314.20 for set back boxes Functions with all standard devices, switches, and GFCIs 2-hour fire rating Manufactured from 105°C continuous use 94V0 rated flame retardant plastic for safer installations Larger flange provides extra device support when the wall opening is miscut or oversized Accommodate midi or jumbo cover plates Trimmable along the perforated flange for use with standard plates Some bulkier devices may not fit. (GFCI Receptacle, USB Charger receptacles, Some Dimmers) Technical Information Model: BE4 Outer Height: 4.188" Screws Height Distance: 3.281" Outer Width: 7.749" Color: White Material: Plastic Trade Size: 4-Gang Documents Brochure Instruction sheet BE4 Line Drawing