Fish Tape & Conduit Tools

Description The Magnetic Wire Puller from Klein Tools quickly and easily fishes wire and cable behind finished walls or enclosed spaces. Connect wire or cable to the flexible stainless-steel leader and rare-earth block magnet that make up the in-wall unit. Simply maneuver the magnetic hand-held unit over the outside of the wall allowing the strong, rare-earth magnets to provide great hold for easy wire pulling or fishing. Features Magnetic wire puller quickly and easily fishes wire and cable behind finished walls and enclosed spaces High strength, rare earth magnets provide strong hold for easy wire and cable pulling Magnetic handheld unit features easy rolling mar-resistant wheels, reducing marks on finished walls 180-Degree pivot handle with a comfort grip provides easy control and maneuverability In-wall unit consists of strong rare earth magnets and flexible stainless-steel leader with eyelet Hard plastic carrying case securely stores both units Doubles as a metal stud finder with marking notches on all four sides of handheld unit Technical Information Type: Conduit Tool Application: Wire Pulling Special Features: Rare Earth Magnets Container: Hard Plastic Carrying Case Overall Length: 11'' (27.9 cm) Overall Height: 3.2'' (8.1 cm) Overall Width: 4.7'' (11.9 cm) Material: Plastic, Stainless Steel, Rare Earth Magnets Included: Handheld Magnetic Truck, Stainless Steel Magnetic Eyelet Leader, Carrying Case Weight: 2 lb (1 kg) Color: Orange UPC: 092644506116 Document Brochure Instruction

Description Conduit replacement blade kit comes with two blades. For use with Klein Tools Cat. Nos. 85091, 85191 and 19352. Features a lifetime guarantee of quality and reliability. Benefits Conduit reamer replacement blade kit for 85091, 85191 and 19352 Made in the USA Designed to be used on Electrical Metallic Tubing (EMT) Includes two replacement blades, two set screws and one hex key. Technical Information Application: Electrical Metallic Tubing (EMT) Overall Length: 1.29'' (3.3 cm) Type: Conduit Reamer Replacement Blade Kit Weight: 0.16 oz (4.5 g) Documents Instruction Brochure

Description The Klein Tools Conduit-Fitting and Reaming Screwdriver can ream and smooth 1/2'' (13 mm), 3/4'' (19 mm), and 1'' (25 mm) thin-wall conduit. It features a hooded-blade design that keeps the screwdriver tip from slipping out of screws, which is especially handy when tightening hard-to-reach conduit fittings. This screwdriver has a longer Cushion-Grip handle for even more comfort and torque while reaming. Benefits Hooded-blade design keeps tip from slipping out of screws, especially when tightening hard-to-reach conduit fittings; thicker hood is designed for rugged use Reams and smooths 1/2-Inch (13 mm), 3/4-Inch (19 mm), and 1-Inch (25 mm) thin-wall conduit ends to protect wire and permit correct installation of fittings Reams both the inside and outside of the conduit at the same time Longer Cushion-Grip handle provides comfort and more torque for reaming Replaceable reaming blade is now held in place with a 1/16-Inch hex socket set screw Designed to be used on Electrical Metallic Tubing (EMT) Technical Information Application: Electrical Metallic Tubing (EMT) Conduit Size: 1/2'' (1.3 cm), 3/4'' (1.9 cm), 1'' (2.5 cm) Tip Size: 5/16'' (0.8 cm) Shank Length: 2.5'' (6.4 cm) Overall Length: 7.5'' (19.1 cm) Documents Klein Screwdriver Brochure

Description This specialty set of fish rods is the perfect solution for low-light applications. In addition to the six 5-foot glow rods, this set also includes an illuminated LED, a hook and a bullet nose tip making it a great option for telecom and datacom installations. The protective Splinter Guard™ coating on these fish rods guard your hands against fiberglass splinters. These mid-flex, 3/16-Inch rods can connect together easily up to a full 30-foot allowing wire to be pulled across long distances. Benefits Set of six 3/16-Inch (4.7 mm) diameter x 5-foot (1.5 m) long lightweight, extra-durable mid-flex glow rods that assemble up to a full 30-feet (9.1 m) Protective Splinter Guard™ coating keeps hands protected from fiberglass splinters Durable 1/4-Inch diameter stainless steel connectors Included: bullet nose, hook and LED-illuminated fish rod tip to attach, grab and guide wires Illuminated tip has tapered ends for easy pushing and pulling Ideal for low light applications; excellent for telecom and datacom installations U.S. Pat. No. 9,062,834 Technical Information Application: Electrical, Telecom, Datacom Special Features: Glow in the Dark, Illuminated Tip Overall Length: 30' (9.1 m) Material: Fiberglass Rods Coated with Splinter Guard Diameter: 0.188'' (0.5 cm) Included: (6) 5' (1.5 m) Glow Rods with Bullet Nose, Hook, and LED-Illuminated Tip Attachments Weight: 1.2 lb (0.5 kg) Document Brochure

Description The Klein Tools' 50-Foot Steel Fish Tape is perfect for wire runs associated with light commercial, residential and voice-data-video installations. The optimized housing and handle design decreases payout effort and reduces binding. The large handle allows for a firm, steady grip as you pull the tape from the housing. The tape features laser-etched descending markings placed at every foot. These markings allow you to accurately measure the depth of conduit runs and determine the amount of tape left to pay out. Benefits Durable 1/8-Inch wide steel fish tapes are firm yet flexible for large wire pulls Optimized design of the tape housing decreases payout effort Slip-resistant housing geometry improves winding power Multi-position handle gives you a firm, steady grip as you pull tape from the case Descending laser etched markings in 1-Foot (0.3 m) increments Easy-to-read distance marks allow you to more accurately measure conduit runs and the amount of tape left to pay out Polypropylene case and handle offer high impact resistance U.S. Patents: 8164025; 8168921; 8212178; 9895773; 10099316 Technical Information Type: Steel Fish Tape Application: Wire Pulling Special Features: Optimized Housing Design Overall Length: 1.20'' (3.0 cm) Overall Height: 8.81'' (22.4 cm) Overall Width: 7.55'' (19.2 cm) Material: Steel Color: Orange/Black Tape Size: 50.0' x 0.125'' x 0.045'' (15.2 m x 0.3 cm x 0.1 cm) Diameter: 7'' (17.8 cm) Tape End: Double Loop Weight: 1.5 lb (680.4g) Document Brochure Instructions

Description Klein Tools’ conduit benders with Patent Pending Angle Setter™ technology allow for quick, accurate repeated bends. The wide foot pedal provides excellent stability and features angled grooves for extra traction. With easily visible bold cast-in benchmark symbols, degree scales and multiplier scales help save time on the job. Benefits 3/4-Inch assembled Aluminum Bender includes Klein’s unique Angle Setter™ technology for time-saving, repeated accurate bends; Patent pending Angle Setter™ for use on 10-, 22.5-, 30-, and 45-Degree bends (adjusted for conduit spring back) Easy handling aluminum head is reinforced for added strength Bold cast markings and symbols make for fast, easy conduit alignment to make all bend types, including saddle and back-to-back bends Wide foot pedal provides excellent stability, leverage, and comfort Interior hook surface prevents conduit from rolling or twisting during bends Includes markings for 10-Degrees, 22.5-Degrees, 30-Degrees, 45-Degrees, 60-Degrees and corresponding offset multipliers Compatible with Klein’s 3/4-Inch Angle Setter™ (Cat. No. 51612) creates a hard stop for quick, accurate, and consistent bends Designed to bend 3/4-Inch EMT, 1/2-Inch Rigid and 1/2-Inch IMC conduit Technical Information Type: Aluminum Conduit Bender Application: Bending Conduit Special Features: Patent Pending Angle Setter™ Technology Overall Length: 1.9'' (4.8 cm) Overall Height: 44.1'' (112.0 cm) Overall Width: 9.8'' (24.8 cm) Material: Aluminum Handle Length: 38'' (96.5 cm) Stub-Up Height: 6'' (15.2 cm) Thinwall/EMT: 0.75'' (1.9 cm) Rigid/IMC: 1/2'' (1.3 cm) Conduit Size: 3/4'' Conduit Type: EMT Marking: 10°, 22°, 30°, 45°, 60° Included: Head, Handle, Angle Setter™ Weight: 4.9 lb (2.2 kg) Document Brochure Instructions

Description Ream conduit and install fittings in a fraction of the time with this Power Conduit Reamer. Designed to fit into power drill chucks and quick release adapters, the power conduit reamer reduces time and wrist fatigue on projects with large quantities of conduit runs. Includes replaceable No. 2 square recess bit for installing conduit fittings.. Benefits Power Conduit Reamer reams 1/2-Inch (13 mm), 3/4-Inch (19 mm) and 1-Inch (25 mm) conduit and install fittings in a fraction of the time Reduce time on projects with large quantities of conduit runs Designed to fit into power drill chucks and quick release adapters with improved bit retention Includes precision engineered replaceable reaming blade Made in USA Replacement blades (SKU #19353) are available and the only approved blade for use in our tool Designed to be used on Electrical Metallic Tubing (EMT) Technical Information Application: Electrical Metallic Tubing (EMT) Conduit Size: 1/2'', 3/4'', 1'' (1.3 cm, 1.9 cm, 2.5 cm) Overall Length: 5.75'' (14.6 cm) Type: Conduit Reamer Drill Head for 1/2'', 3/4'', 1'' Weight: 5.3 oz (150 g) Documents Brochure

Description Klein Tools’ first fully glow-in-the-dark fish tape. The unique clear case permits ambient light to easily charge the glow tape and tip, providing a bright glow for use in low light. The fiberglass tape is fully removable from case for one-way wall cavity, drop ceiling, and conduit pass through feeding. The anchor end features a stainless-steel fish rod connector so any of our fish rod accessories can be attached to the end of the fish tape, allowing this fish tape to also function as a super-flex glow rod. An optimal fish tape for installing wire or cable behind walls and ceilings, in short box-to-box runs and branch circuits, or in flexible tubing. This fish tape’s compact size makes it a great addition to your everyday tool bag. Benefits 20-Foot Fish Tape features unique glow-in-the-dark fiberglass tape and nylon tip Clear housing allows the glow material to charge in the case Fully removable from case for more versatile application such as pass-through wire feeding Anchoring end utilizes stainless steel connector that is compatible with Klein Fish Rod attachments (Cat. No. 56511) Alignment mark on case makes for easy re-installation into housing Narrow, eyelet tip for easy feeding through crowded spaces Durable case and handle offer superior impact resistance Made in the USA; Patent Pending Technical Information Type: Fish Tape Application: Wire Pulling Special Features: Glow-in-the-Dark Tape and Tip, Clear Case, Removable Tape, Equipped with Fish Rod Attachment Connector Overall Length: 1.2'' (3 cm) Overall Height: 8.81'' (22.4 cm) Overall Width: 7.55'' (19.2 cm) Material: Fiberglass, Glass-Filled Nylon Color: Clear/White Tape Size: 20' x 0.153'' (6.1 m x 3.9 mm) Diameter: 7.5'' (19.1 cm) Tape End: Glow-in-the-Dark Nylon Eyelet Weight: 14.4 oz ( 408 g) Document Brochure Instructions

Description Easily locate fish rod end in dark spaces. The illuminated fish rod tip from Klein Tools lights up for maximum visibility. You'll enjoy long life from the bright white, omni-directional LED light. The tapered end makes for easy pushing and pulling while the hook or bullet nose attachments fit smoothly into the threaded top. Benefits Fish rod tip lights up for maximum visibility Bright white, omni-directional LED light for long life Tapered end for easy pushing and pulling Threaded top for hook or bullet nose attachment (not included) Fits drilled holes as small as 5/8-Inch Attach tip to fish rod for ease of visibility in dark spaces Replaceable batteries included U.S. Pat. No. 9,062,834 Technical Information Diameter: 0.578'' (1.5 cm) Overall Length: 2.5'' (6.4 cm) Overall Width: 0.578'' (1.5 cm) Weight: 5 oz (141 g) UPC: 092644561191

Description Klein Tools’ conduit benders with Patent Pending Angle Setter™ technology allow for quick, accurate repeated bends. The wide foot pedal provides excellent stability and features angled grooves for extra traction. With easily visible bold cast-in benchmark symbols, degree scales and multiplier scales help save time on the job. Benefits 1/2-Inch assembled Aluminum Bender includes Klein’s unique Angle Setter™ technology for time-saving, repeated accurate bends; Patent pending Angle Setter™ for use on 10-, 22.5-, 30-, and 45-Degree bends (adjusted for conduit spring back) Easy handling aluminum head is reinforced for added strength Bold cast markings and symbols make for fast, easy conduit alignment to make all bend types, including saddle and back-to-back bends Wide foot pedal provides excellent stability, leverage, and comfort Interior hook surface prevents conduit from rolling or twisting during bends Includes markings for 10-Degrees, 22.5-Degrees, 30-Degrees, 45-Degrees, 60-Degrees and corresponding offset multipliers Interior clamp securely holds conduit while cutting with hacksaw Features Klein’s Angle Setter™ Cat. No. 51611 that creates a hard stop for quick, accurate, and consistent bends Technical Information Type: Aluminum Conduit Bender Application: Bending Conduit Special Features: Patent Pending Angle Setter™ Technology Overall Length: 1.7'' (4.4 cm) Overall Height: 43.1'' (109.5 cm) Overall Width: 8.1'' (20.6 cm) Material: Aluminum Handle Length: 38'' (96.5 cm) Stub-Up Height: 5'' (12.7 cm) Thinwall/EMT: 0.5'' (1.3 cm) Conduit Size: 1/2'' Conduit Type: EMT Marking: 10°, 22°, 30°, 45°, 60° Included: Head, Handle, Angle Setter™ Weight: 4.3 lb (2 kg) Document Brochure Instructions

Description The Klein Tools' 120-Foot, High-Carbon Steel Fish Tape is perfect for wire runs associated with commercial, residential and voice-data-video installations. The optimized housing and handle design decreases payout effort and reduces binding. A multiple-position handle allows for a firm, steady grip as you pull or rewind the tape. The unique interior case shape combines the leverage of square cases and the comfort of round cases, which makes rewinding tape after a long run easier. The tape features laser-etched descending markings placed at every foot. These markings allow you to accurately measure the depth of conduit runs and determine the amount of tape left to pay out. Benefits Durable, high-carbon strength 1/8-Inch wide steel fish tapes are firm yet flexible for long runs and large wire pulls Case design decreases payout effort and friction by optimizing the tape payout angle Slip-resistant housing geometry improves winding power and reduces binding Multi-position handle gives you a firm, steady grip as you pull or rewind tape from the case Descending laser etched markings in 1-Foot (0.3 m) increments allow you to more accurately measure conduit runs and the amount of tape left to pay out Protective coating on the steel tape reduces corrosion from non-contact moisture and humidity Polypropylene case and handle offer high impact resistance U.S. Patents: 8164025; 8168921; 8212178; 9895773; 10099316 Technical Information Type: Steel Fish Tape Application: Wire Pulling Special Features: Optimized Housing Design, High Carbon Steel Overall Length: 1.85'' (4.7 cm) Overall Height: 16.21'' (41.2 cm) Overall Width: 12.35'' (31.4 cm) Material: Steel Color: Orange/Black Tape Size: 120.0' x 0.125'' x 0.062'' (36.6 m x 0.3 cm x 0.2 cm) Diameter: 13'' (33 cm) Tape End: Double Loop Weight: 5.0 lb (2.3 kg) Document Brochure Instructions

Description The Klein Tools 65-foot (19.81 m) steel fish tape features innovative permanent laser-etched markings. The tape is marked every foot in descending order allowing you to more accurately measure conduit runs and know how much tape is left to pay out. Raised finger grips on the case help transfer 100-percent of the winding power from your hands and fingers. Benefits Fish tapes are 1/8-Inch wide high strength spring steel which are stiff for long runs and great for heavy duty wire pulls Laser etched markings in 1-foot (0.3 m) increments allow you to more accurately measure the depth of conduit runs and determine the amount of tape left to pay out Polypropylene case and handle offer the maximum in impact resistance Raised fingergrips transfer 100-percent of the winding power from your hand and fingers Full grip style handle gives you a firm, steady grip as you pull tape from the case Unique sloped handle optimizes hand position for quick hand-over-hand rewinds Patents: D574,277; 8,212,178; 8,168,921; 8,164,025. Other patents pending Technical Information Overall Width: 0.125'' (0.3 cm) Material: Steel Tape Size: 65' x 1/8'' x 0.062'' (19.8 m x 0.3 cm x 0.2 cm) Diameter: 9'' (22.9 cm) Tape End: Double Loop Steel Weight: 2.6 lb (1.2 kg) Document Brochure Instructions

Description If you've ever used fiberglass fish rods, you know how painful and annoying fiberglass splinters can be. The protective coating on these fish rods guards your hands against splinters. These flexible yet rigid rods will pull wire across long distances. 1/4-Inch (6 mm) and 3/16-Inch (5 mm) diameter rods can connect together for added versatility. The set includes attachments and glow in dark rods to help make the job easier. Benefits Extra durable, lightweight and available in a variety of lengths and flexibilities Five 1/4-Inch (6 mm) diameter fish rods and one 3/16-Inch (5 mm) diameter glow rod assemble to a full 25-feet (7.62 m) Five rods with durable 5/16-Inch diameter stainless steel connectors and one rod with 1/4-Inch diameter stainless steel connectors Bullet nose and hook attachments to attach and grab wires Protective Splinter Guard coating keeps hands free of fiberglass splinters Made in the USA Technical Information Overall Length: 25' (7.6 m) Material: Fiberglass Diameter: 1/4'' to 3/16'' (0.6 to 0.5 cm) Included: (5) 4' (1.2 m) Lo-Flex Fish Rods, (1) 5' (1.3 m) Mid-Flex Glow Rod with Bullet Nose and Hook Attachments Weight: 1.8 lb (0.8 kg) Document Brochure

Description This durable PVC and Multilayer Tubing Cutter provides quick, clean cuts and ease of use for the professional tradesperson. An excellent choice for drain and vent lines, it will cut 1" plastic tubing, hose or multilayer tubing, and up to 3/4" schedule 40 PVC. The handle latch keeps the tool locked when not in use. (Not for use on metallic pipes or cable wire). Benefits Cuts 1-Inch (25 mm) O.D. multilayer plastic tubing and up to 3/4-inch (19 mm) Schedule 40 PVC pipe Handle latch keeps tool closed Blades are replaceable PTFE coated steel blade Rubberized grip with anti-impact design Do NOT use to cut metallic pipes or cable wire Do NOT cut cold PVC Technical Information Type: Tubbing Cutter Application: PVC/Plastic Tube Cutting Blade Type: PTFE Coating on Square Steel Blade Cutting Capacity: 1" (25.4 mm) O.D. Multilayer Plastic Tubing and Up To 3/4" (19.1 mm) Schedule 40 PVC Cutting Material: PVC and Multi-layer Plastic Tubing Handle Type: Black Plastic Material: Magnesium Cast Overall Height: 2.594" (65.9 mm) Overall Length: 7.344" (186.5 mm) Overall Width: 0.984" (25 mm) Features: Ideal for Plastic Tubing Weight 7.6 oz (215 g)

Description Klein Tools offers an innovative variety of durable attachments providing the right tool for any wire and cable fishing situation. This seven-piece attachment set plus hard carrying case includes the unique Double-S hook and a redesigned Whisk. The Double-S Hook is designed to grab wire or cable and secure it with the attachment when pulling. The Whisk has an updated, sleek design for maneuvering over and around obstacles, and a female connector to attach hooks or bullets for a complete solution. Note: Does not fit Super Rod Series (SRS) fish rods. Benefits Fit all Klein Splinter Guard rods 7 attachments: Whisk, Double-S hook, Bullet nose, Twin hook, Single hook, Magnet, Chain Innovative new Double-S hook grabs and secures wire and cable in difficult pulling applications Whisk can be used alone or in conjunction with any of the attachments to guide rods over and past obstacles Magnet attaches to the chain to retrieve wire in blind applications Bullet Nose allows easy pulling with the line attachment hole Single hook easily grabs and retrieves wires Twin hook is a grappling-style tool for difficult wire retrieval Includes hard plastic carrying case Patent Pending Technical Information Type: Wire Pulling Attachment Kit Application: Wire Pulling, Installation Special Features: 7 Piece Set Material: Stainless Steel, Steel, Polypropylene, Neodymium Magnet Color: Steel, Orange Overall Length: 2.4'' (6.1 cm) Overall Height: 5.3'' (13.5 cm) Overall Width: 3.3'' (8.4 cm) Weight: 6 oz (170 g) Document Brochure

Description Klein Tools’ conduit benders with Patent Pending Angle Setter™ technology allow for quick, accurate bends. When performing repeated bends the Angle Setter will save time on the job. Works for floor or air bends. Benefits Klein’s unique Angle Setter™ technology for quick, accurate repeated bends saving time on the job (Patent Pending) Creates a hard stop for fast accurate bending Movable for four different bend angles: 10-Degree, 22.5-Degree, 30-Degree, 45-Degree (adjusted for conduit spring back) Align the angle lines on the Angle Setter with the bender, ensure the alignment tabs are fully seated in the bender track notches, press the Angle Setter firmly into place Conduit insets into bender head, bend as usual until the conduit makes contact with the setter Compatible with Klein Tools' 3/4-Inch Aluminum Conduit Bender (Cat. No. 51607) Also available in 1/2-Inch (Cat. No. 51611) and 1-Inch (Cat. No. 51613) Technical Information Type: Angle Setter Application: Angle Setter for Klein Conduit Benders Special Features: Patent Pending Technology Overall Length: 2.4'' (6.1 cm) Overall Height: 1.0'' (2.6 cm) Overall Width: 1.0'' (2.6 cm) Material: Delrin® Thinwall/EMT: 0.75'' (1.9 cm) Conduit Size: 3/4'' Marking: 10°, 22.5°, 30°, 45° Weight: 1.5 oz (43 g) Document Brochure Instruction

Description If you've ever used fiberglass fish rods, you know how painful and annoying fiberglass splinters can be. The protective coating on these fish rods guards your hands against splinters while the glow illuminates dark work spaces. Rods assemble to whatever length needed. Get the job done fast and keep your hands pain free with these general purpose fish rods. Benefits Mid-range flexibility for most fishing applications Protective Splinter Guard™ coating keeps hands free of fiberglass splinters Durable stainless steel connectors Glows in the dark to illuminate dark work spaces Six 3/16-Inch (5 mm) diameter x 18-Inch (457 mm) glow rods assemble to a full 9-feet (2.74 m) Compact size fits easily in tool bags for transport Made in the USA Technical Information Overall Length: 9' (2.7 m) Material: Fiberglass Diameter: 0.188'' (0.5 cm) Included: (6) 18'' (457.2 mm) Glow Rods with Bullet Nose and Hook Attachments Weight: 8.8 oz (249 g) Document Brochure

Description The knockout set's special punch profile splits slugs to easily remove them. The knurled edge allows for a better grip. Benefits 2" Conduit (2.42" or 61.5 mm) Special punch profile splits slugs to easily remove them Knurled edge allows for a better grip Laser markings allow you to easily identify parts Alignment markings provide better accuracy Recommended for 10-gauge mild steel, brass, copper, aluminum, fiberglass and plastics Punch and die are made in the USA Replaces 7211BB-2 Technical Information Brand: Greenlee Size: 2" Conduit (2.42" or 61.5 mm) Shape: Round Thickness: Punch 10 ga mild steel Material: For use in mild steel, brass, copper, aluminum, fiberglass and plastics Documents Brochure Manual

Description The Greenlee FTS438-240 Steel Fish Tape is designed for high-quality fishing performance. Its oil-tempered spring steel construction features a dirt-free finish to help keep hands clean during use. Its designed with an advanced comfort handle grip to reduce fatigue, and the superior rapid payout and rewind provides quick and efficient use. A viewing port on the container makes the remaining tape visible and allows for the removal of debris. Benefits Oil-tempered spring steel offers high-quality fishing performance Dirt-free finish helps keep hands clean during use Advanced comfort handle grip reduces fatigue Superior rapid payout and rewind provides quick and efficient use Smaller fish eye with offset bend improves fishing ability Improved low-profile tip encourages easy fishing through most sizes of conduit Viewing port makes remaining tape visible and allows for the removal of debris Rugged case improves drop impact capability Flared case with grip ridges offers nonslip handling Maximum 400 lbs (181.4 kg) tensile strength Technical Information Brand: Greenlee Tensile Strength: 400.000 LB (1.700 KN) Maximum Design Strength Material: Steel Package: 1/Pack

Description Powr-Fish extra heavy-duty pull-line is white with the red tracer for easy identification. It is a continuous-fiber polyline that can be blown directly into a conduit. It will not rot or mildew and can be left in conduit for future use. Pull-line features convenient packaging in a bucket for 2,200 ft length with pre-punched top for easy access, and to keep the pull-line from spilling or tangling. It is considered an extra heavy-duty pull-line and exhibits 210 lb. tensile strength. Benefits • White with red tracer for easy identification • Extra heavy-duty 500 lb. tensile, our highest tensile-rated pull-line • Continuous-fiber polyline great for blowing directly into conduit • Will not rot or mildew • Can be left in conduit for future use Technical Information Brand: Ideal Pull Type: Pull-Line Tensile Strength: 500 lbs

Description Milwaukee's Polyester Fish Tapes feature a high flexibility tape for the easiest fishing. The triple strand design won't kink after repeated use and delivers a more durable tape. The non-conductive tip allows you to safely handle wire and cable in electrical applications. A low friction case provides you with a smooth payout and easy rewind. The fish tape features a multi-position handle allowing you to comfortably use the fish tape in any jobsite scenario. Features High Flexibility Polyester Tape Triple Strand Design Low Friction Case Multi-Position Handle Square Inner Grip 12" Overall Length 200' Length Flexible Metal Leader Technical Information Length: 2.17 in Weight: 4.8 lb Height: 17.3 in Width: 13.19 in

Description For use with fiberglass fish tapes (56009, 56010, 56014 and 56024). Instant Adhesive. 3-piece set includes Non-Conductive Eyelets ( 2 Ea.), Tube Quick-Drying Glue (1 Ea.). Made in USA. Features For use with fiberglass fish tapes (56009, 56010, 56014 and 56024). Made in USA Technical Information Type: Instant Adhesive Application: Fiberglass Fish Tape Repair Special Features: For Use with Cat. Nos. 56009, 56010, 56014, and 56024 Included: (2) Non-Conductive Eyelets, (1) Tube Quick-Drying Glue Weight: 2.2 lb (1.0 kg) Document Brochure Instruction

Description Klein Tool's 40-Foot glow-in-the-dark fish tape provides a bright glow for use in any low light. The unique clear case permits ambient light to easily charge the glow tape and tip. The fiberglass tape is fully removable from case for one-way wall cavity, drop ceiling, and conduit pass through feeding. The anchor end features a stainless-steel fish rod connector so any of our fish rod accessories can be attached to the end of the fish tape, allowing this fish tape to also function as a super-flex glow rod. An optimal fish tape for installing wire or cable behind walls and ceilings, in mid-range box-to-box runs and branch circuits, or in flexible tubing. This fish tape’s compact size makes it a great addition to your everyday tool bag. Features 40-Foot Fish Tape features unique glow-in-the-dark fiberglass tape and nylon tip Compact, clear housing allows the glow material to charge in the case while on the go Fully removable from case for more versatile application such as pass-through wire feeding Anchoring end utilizes stainless steel connector that is compatible with Klein Fish Rod attachments (Cat. No. 56511) Durable case and handle offer superior impact resistance Narrow, eyelet tip for easy feeding through crowded spaces Alignment mark on case makes for easy re-installation into housing Made in the USA with global components; Patent Pending Technical Information Type: Fish Tape Application: Wire Pulling Special Features: Glow-in-the-Dark Tape and Tip, Clear Case, Removable Tape, Equipped with Fish Rod Attachment Connector Overall Length: 11.3'' (29 cm) Overall Height: 1.5'' (4 cm) Overall Width: 9.06'' (23 cm) Material: Fiberglass Color: Clear/White Tape Size: 40' x 0.153'' (12 m x 3.9 mm) Diameter: 9'' (23 cm) Tape End: Glow-in-the-Dark Nylon Eyelet Weight: 1.6 lb (0.7 kg)

Description The manual knockout set is optimized for 10-gauge mild steel. It has alignment markings to help increase accuracy. Benefits 1/2" Conduit (0.89" or 22.5 mm) Special punch profile splits slugs to easily remove them Knurled edge allows for a better grip Laser markings allow you to easily identify parts Alignment markings provide better accuracy Recommended for 10-gauge mild steel, brass, copper, aluminum, fiberglass and plastics Punch and die are made in the USA Replaces model number 60246 Technical Information Brand: Greenlee Size: 1/2" Conduit (0.89" or 22.5 mm) Shape: Round Thickness: Punch 10 ga mild steel Material: For use in mild steel, brass, copper, aluminum, fiberglass and plastics Documents Brochure Manual

Description The Greenlee FTS438-125 Steel Fish Tape is designed for high-quality fishing performance. Its oil-tempered spring steel construction features a dirt-free finish to help keep hands clean during use. Its designed with an advanced comfort handle grip to reduce fatigue, and the superior rapid payout and rewind provides quick and efficient use. A viewing port on the container makes the remaining tape visible and allows for the removal of debris. Benefits Oil-tempered spring steel offers high-quality fishing performance Dirt-free finish helps keep hands clean during use Advanced comfort handle grip reduces fatigue Superior rapid payout and rewind provides quick and efficient use Smaller fish eye with offset bend improves fishing ability Improved low-profile tip encourages easy fishing through most sizes of conduit Viewing port makes remaining tape visible and allows for the removal of debris Rugged case improves drop impact capability Flared case with grip ridges offers nonslip handling Maximum 400 lbs (181.4 kg) tensile strength Technical Information Brand: Greenlee Tensile Strength: 400.000 LB (1.700 KN) Maximum Design Strength Material: Steel Package: 1/pack

Description Klein Tools’ conduit benders with Patent Pending Angle Setter™ technology allow for quick, accurate repeated bends. The wide foot pedal provides excellent stability and features angled grooves for extra traction. With easily visible bold cast-in benchmark symbols, degree scales and multiplier scales help save time on the job. Benefits 1-Inch assembled Iron Bender includes Klein’s unique Angle Setter™ technology for time-saving, repeated accurate bends; Patent pending Angle Setter™ for use on 10-, 22.5-, 30-, and 45-Degree bends (adjusted for conduit spring back) Heavy duty cast ductile iron has the durability needed on the job site Bold cast markings and symbols make for fast, easy conduit alignment to make all bend types, including saddle and back-to-back bends Wide foot pedal provides excellent stability, leverage, and comfort Interior hook surface prevents conduit from rolling or twisting during bends Includes markings for 10-Degrees, 22.5-Degrees, 30-Degrees, 45-Degrees, 60-Degrees and corresponding offset multipliers Features Klein’s 1-Inch Angle Setter™ (Cat. No. 51613) that creates a hard stop for quick, accurate, and consistent bends Designed to bend 1-Inch EMT, 3/4-Inch Rigid and 3/4-Inch IMC conduit Technical Information Type: Iron Conduit Bender Application: Bending Conduit Special Features: Patent Pending Angle Setter™ Technology Overall Length: 2.5'' (6.4 cm) Overall Height: 52.1'' (132.3 cm) Overall Width: 12.9'' (32.9 cm) Material: Iron Handle Length: 44'' (111.8 cm) Stub-Up Height: 8'' (20.3 cm) Thinwall/EMT: 1'' (2.5 cm) Rigid/IMC: 0.75'' (1.9 cm) Conduit Size: 1'' Conduit Type: EMT Marking: 10°, 22°, 30°, 45°, 60° Included: Head, Handle, Angle Setter™ Weight: 11.8 lb (5.4 kg) Document Brochure Instructions

Description Klein Tools’ conduit benders with Patent Pending Angle Setter™ technology allow for quick, accurate repeated bends. The wide foot pedal provides excellent stability and features angled grooves for extra traction. With easily visible bold cast-in benchmark symbols, degree scales and multiplier scales help save time on the job. Benefits 3/4-Inch assembled Iron Bender includes Klein’s unique Angle Setter™ technology for time-saving, repeated accurate bends; Patent pending Angle Setter™ for use on 10-, 22.5-, 30-, and 45-Degree bends (adjusted for conduit spring back) Heavy duty cast ductile iron has the durability needed on the job site Bold cast markings and symbols make for fast, easy conduit alignment to make all bend types, including saddle and back-to-back bends Wide foot pedal provides excellent stability, leverage, and comfort Interior hook surface prevents conduit from rolling or twisting during bends Includes markings for 10-Degrees, 22.5-Degrees, 30-Degrees, 45-Degrees, 60-Degrees and corresponding offset multipliers Features Klein’s 3/4-Inch Angle Setter™ (Cat. No. 51612) that creates a hard stop for quick, accurate, and consistent bends Designed to bend 3/4-Inch EMT, 1/2-Inch Rigid and 1/2-Inch IMC conduit Technical Information Type: Iron Conduit Bender Application: Bending Conduit Special Features: Patent Pending Angle Setter™ Technology Overall Length: 1.9'' (4.8 cm) Overall Height: 44.1'' (112 cm) Overall Width: 9.8'' (24.8 cm) Material: Iron Handle Length: 38'' (96.5 cm) Centerline Bend Radius: 5''- Stub-up Height 6'', Centerline Radius 5-1/2'' Thinwall/EMT: 0.75'' (1.9 cm) Rigid/IMC: 1/2'' Conduit Size: 3/4'' Conduit Type: EMT Marking: 10°, 22°, 30°, 45°, 60° Included: Head, Handle, Angle Setter™ Weight: 6.6 lb (3.0 kg) Document Brochure Instructions

Description Klein Tools’ conduit benders with Patent Pending Angle Setter™ technology allow for quick, accurate repeated bends. The wide foot pedal provides excellent stability and features angled grooves for extra traction. With easily visible bold cast-in benchmark symbols, degree scales and multiplier scales help save time on the job. Benefits 1/2-Inch assembled Iron Bender includes Klein’s unique Angle Setter™ technology for time-saving, repeated accurate bends; Patent pending Angle Setter™ for use on 10-, 22.5-, 30-, and 45-Degree bends (adjusted for conduit spring back) Heavy duty cast ductile iron has the durability needed on the job site Bold cast markings and symbols make for fast, easy conduit alignment to make all bend types, including saddle and back-to-back bends Wide foot pedal provides excellent stability, leverage, and comfort Interior hook surface prevents conduit from rolling or twisting during bends Includes markings for 10-Degrees, 22.5-Degrees, 30-Degrees, 45-Degrees, 60-Degrees and corresponding offset multipliers Features Klein’s 1/2-Inch Angle Setter™ (Cat. No. 51611) that creates a hard stop for quick, accurate, and consistent bends Technical Information Type: Iron Conduit Bender Application: Bending Conduit Special Features: Patent Pending Angle Setter™ Technology Overall Length: 1.7'' (4.4 cm) Overall Height: 43.1'' (109.5 cm) Overall Width: 8.1'' (20.6 cm) Material: Iron Handle Length: 38'' (96.5 cm) Centerline Bend Radius: 4''- Stub-up Height 5'', Centerline Radius 4-5/8'' Thinwall/EMT: 0.5'' (1.3 cm) Conduit Size: 1/2'' Conduit Type: EMT Marking: 10°, 22°, 30°, 45°, 60° Included: Head, Handle, Angle Setter™ Weight: 5.5 lb (2.5 kg) Document Brochure Instructions

Description Thumb Winder Blue-Steel Fish Tape is a general-purpose fish tape. It can pull wires through conduit, walls, floors, under the carpet, and over ceilings. It possesses the highest tensile strength and highest grade carbon steel for professional durability and reliability. It provides rust and corrosion resistance for longer life. Benefits • Laser etched in 12 in. increments to provide instant conduit length (Tuff-Grip™ Pro models only) • Unique "blued" finish is non-oily and resists rust • Industry's straightest wire • Stiffer for long runs Technical Information Brand: Ideal Colour: Blue Case Diameter: 7" Case Type: Thumbwinder End Type: Formed Hook Tape Thickness: 0.045" Tensile Strength: 1600 lbs Width: 1/8" Documents Product Catalog

Description Polyester Conduit Measuring Tape, 3/16" x 3000' (44./mm x 914m). Fish and measure conduit runs in one operation. Permanently printed measurements every foot from zero to 3000' (914 m). Made of strong, waterproof polyester. Features Greenlee's power fishing tool allows you to fish and measure conduit runs in one operation Permanently printed measurements every foot from zero to 3000' IN (914 m) Made of strong, waterproof polyester Pay-out dispenser has anti-skid pads, handle and built-in cutter Technical Information Application: For Conduit Measurement Length: 3000.000 FT (914.000 M) Material: Waterproof Polyester Tensile Strength: 170.000 LB (756.000 KN) Average Breaking Strength Weight: 4.400 LB (2.000 KG) Width: 3/16 IN (4.800 MM)

Description Klein Tools’ conduit benders with Patent Pending Angle Setter™ technology allow for quick, accurate bends. When performing repeated bends the Angle Setter will save time on the job. Works for floor or air bends. Benefits Klein’s unique Angle Setter™ technology for quick, accurate repeated bends saving time on the job (Patent Pending) Creates a hard stop for fast accurate bending Movable for four different bend angles: 10-Degree, 22.5-Degree, 30-Degree, 45-Degree (adjusted for conduit spring back) Align the angle lines on the Angle Setter with the bender, ensure the alignment tabs are fully seated in the bender track notches, press the Angle Setter firmly into place Conduit insets into bender head, bend as usual until the conduit makes contact with the setter Compatible with Klein Tools' 1-Inch Iron Conduit Benders (Cat. No. 51605) Also available in 1/2-Inch (Cat. No. 51611) and 3/4-Inch (Cat. No. 51612) Technical Information Type: Angle Setter™ Application: Angle Setter™ for Klein Conduit Benders Special Features: Patent Pending Technology Overall Length: 2.9'' (7.3 cm) Overall Height: 1.1'' (2.6 cm) Overall Width: 1.3'' (3.3 cm) Material: Delrin® Thinwall/EMT: 1'' (2.5 cm) Conduit Size: 1'' Marking: 10°, 22.5°, 30°, 45° Weight: 2 oz (57 g) Document Brochure Instruction

Description Klein Tools’ conduit benders with Patent Pending Angle Setter™ technology allow for quick, accurate bends. When performing repeated bends the Angle Setter will save time on the job. Works for floor or air bends. Benefits Klein’s unique Angle Setter™ technology for quick, accurate repeated bends saving time on the job (Patent Pending) Creates a hard stop for fast accurate bending Movable for four different bend angles: 10-Degree, 22.5-Degree, 30-Degree, 45-Degree (adjusted for conduit spring back) Align the angle lines on the Angle Setter with the bender, ensure the alignment tabs are fully seated in the bender track notches, press the Angle Setter firmly into place Conduit insets into bender head, bend as usual until the conduit makes contact with the setter Compatible with Klein Tools' 1/2-Inch Aluminum Conduit Bender (Cat. No. 51606) Also available in 3/4-Inch (Cat. No. 51612) and 1-Inch (Cat. No. 51613) Technical Information Type: Angle Setter™ Application: Angle Setter™ for Klein Conduit Benders Special Features: Patent Pending Technology Overall Length: 1.8'' (4.6 cm) Overall Height: 0.9'' (2.2 cm) Overall Width: 0.8'' (2.0 cm) Material: Delrin® Thinwall/EMT: 0.5'' (1.3 cm) Conduit Size: 1/2'' Marking: 10°, 22.5°, 30°, 45° Weight: 1.2 oz (34 g) Document Brochure Instruction