Oils & Lubricants

Description IDEAL Aqua-Gel ® II Non-toxic cable pulling lubricant in clear blue color is a polymer-based formula that offers maximum tension reduction in high-stress electrical and communications cable-pulling operations. Lubricant dries to a semi-fluid film that won't clog conduit, and cleans up easily with soap/water. It remains temperature stable over a wide temperature range from 28°F to 180°F (-2°C to 88°C). Lubricant is convenient to apply by hand, brush or pump. It is well suited with all cable types except composite rubber, and clings to cable throughout long pulls. It comes in a 1-quart squeeze bottle, 1-gallon bucket, 5-gallon bucket, and 55-gallon drum. It is environmentally safe, non-toxic, non-flammable and non-corrosive for convenient use. For outdoor use only. Features Polymer-based formula provides maximum tension reduction in high-stress electrical and communication cable-pulling operations Compatible with all cable types except composite rubber, and clings to cable throughout long pulls Remains stable over wide temperature range — usable from 28°F to 180°F (-2°C to 88°C) Environmentally safe – non-toxic, non-flammable and non-corrosive For outdoor use only Technical Information Pack Size: 1-Quart Squeeze Bottle Indoor/Outdoor: Indoor and Outdoor Color: Blue Coefficient of Friction: 0.19 Lubricant Base: Polymer Maximum Stability Range: 82°C Maximum Temperature: 38°C Minimum Stability Range: -2°C Minimum Temperature: 4°C Document Safety Data Sheet Wire Lubricants Selection Guide

Description Klein Tools' Foam Wire Pulling Lubricant is a no mess, no hassle alternative to traditional wax/gel lubricants. The foam fills the conduit and coats the wires as they are pulled through. The lubricant stays where it is applied, even in vertical conduit. It also dissolves clean from hands, clothing and carpeting. Benefits No mess formula stays where it is applied and wipes clean from hands and fabric 4X greater yield than gel or wax lubricants Coats better and is 30-percent more slippery than gel or wax lubricants One can equals four quarts of wax/gel lubricants. Based on jobsite pulls with foam in 3/4-Inch conduit when used as directed Technical Information Application: Wire Pulling Special Features: Coats Better and 30% More Slippery than Gel or Wax Lubricants Size: 19 oz (0.6 L) Container: Aerosol Can Working Temperature: 40° F to 100° F (4° C to 38° C) Weight: 1.2 lb (0.5 kg) Document Brochure Safety Data Sheet

Description IDEAL Yellow 77 ® Wire pulling lubricant is a wax-based formula, and is the perfect general purpose lube. It is safe to use with most cable types except low-density polyethylene and semi-conducting jackets. It won't break down/separate after repeated exposure to freezing temperatures and dries to a thin, non-conductive film that won't clog conduit. Yellow 77 ® has a creamy texture and clings to cable throughout long pulls. Apply conveniently and uniformly by hand or brush. It is a homogeneous blend that requires no mixing and forms surface coat to control evaporation, so it won't dry out. It is environmentally safe, non-toxic, non-flammable and non-corrosive for user safety. Lubricant remains stable in high temperature of 32°F to 130°F (0°C to 54°C). Features Safe to use with most cable types except low-density polyethylene and semi-conducting jackets Clings to cable throughout long runs, even where moisture is present Remains temperature stable from 32°F to 130°F (0°C to 54°C) Dries slowly to a thin, non-conductive film that won’t harden in conduit Environmentally safe – non-toxic, non-flammable and non-corrosive Technical Information Max. Stability Range: 130F(54C) Min. Stability Range: 32F(0C) Pack Size: 1-Gallon Bucket Coefficient of Friction: 0.17 Cable Compatibility: Rubber Indoor/Outdoor: Indoor and Outdoor Lube Type: Wax Document Wire Lubricant Selection Chart Catalogue

Description 3M™ Wire Pulling Lubricant Gel is a translucent white polymer gel that is easy to handle and apply to wire and cable without runs or drips. The lubricant produces a low coefficient of friction that lessens the chance of cable jacket damage from high pulling forces. Not only does 3M™ Wire Pulling Lubricant Gel make wire pulling jobs smoother and safer, it also wipes off the cable quickly and cleanly before terminating or splicing. The consistent gel does not liquefy or separate with hot or cold aging. It stays thick, smooth and ready to apply. The temperature use range is 20 degrees Fahrenheit (-6 degrees Celsius) to 110 degrees Fahrenheit (43 degrees Celsius) Not only does 3M™ Wire Pulling Lubricant Gel make wire pulling jobs smoother and safer, it also wipes off the cable quickly and cleanly before terminating or splicing. The consistent gel does not liquefy, or separate with hot or cold aging. It stays thick, smooth and ready to apply. The temperature use range is 20° F (-6° C) to 110° F (43° C). Features Wire pulling lubricant gel makes pulling jobs smoother and safer Low coefficient of friction means less wire damage and equipment wear for improved safety Thick formula applies faster without messy runs or drips, minimizing preparation time Colourless formula does not stain wire and cable jackets Compatibility with most wire and cable jackets enables varied applications Colourless formula does not stain wire and cable jackets Withstands a temperature range of 20 to 110 °F (-6.7 to 43 °C) UL Listed, CSA Certified and RoHS 2011/65/EU Compliant Technical Information Applications: Lubricant Colour Family: White ETIM Class 8.0: EC002757 Lubricant Type: Gel Manufacturing Origin: USA Maximum Temperature (Celsius): 43.0 °C Maximum Temperature (Fahrenheit): 110.0 °F Minimum Temperature (Celsius): -6.7 °C Minimum Temperature (Fahrenheit): 20.0 °F Operating Temperature (Celsius): -5 to 43 Degree Celsius Operating Temperature (Fahrenheit): 20 to 110 Degree Fahrenheit Operating Temperature Range (Celsius): -5 °C to 49 °C Operating Temperature Range (Fahrenheit): 20 °F to 120 °F Product Colour: Translucent White Product Type: Gel RoHS EU Comments: RoHS 2011/65/EU compliant without exemption Shape: Gel Tape Type: Barricade Temperature Range: 20 - 120 Degrees F (-5 - 49 Degrees C) Volume (Imperial): 4.0 gal Volume (metric): 18.92 L

Description IDEAL ClearGlide ™ Wire pulling lubricant is a polymer-based formula well suited for all electrical and datacom applications, and safe to use with all cable types. It is clear and colorless, and suitable for indoor as well as outdoor applications. This formula provides quick and easy clean up, and extraordinary lubricity for super-fast pulls. Its controlled evaporation rate is ideal for shorter runs. It remains stable over wide temperature ranges from 32°F to 180°F (0°C to 82°C) and dries to a semi-fluid film that won't clog conduit. It is convenient to apply by hand, brush, or pump, and is environmentally safe, non-toxic, non-flammable and non-corrosive for user safety. It comes in 1-qt squeeze bottle, 1-gallon bucket, 5-gallon bucket, and 55 gallon drum. Lubricant is UL listed. Feature Clear and colorless for quick and easy clean-up — great for indoor and retrofit pulls Polymer-based formula is perfect for all electrical and datacomm applications, and is safe to use with all cable types Controlled evaporation rate is ideal for shorter runs Remains stable over wide temperature ranges — usable from 32°F to 180°F (0°C to 82°C) Environmentally safe — non-toxic, non-flammable and non-corrosive Technical Information Max. Stability Range: 180F(82C) Min. Stability Range: 32F(0C) Pack Size: 1-Quart Squeeze Bottle Coefficient of Friction: 0.23 Cable Compatibility: Rubber Indoor/Outdoor: Indoor and Outdoor Lube Type: Polymer Document Catalogue Brochure

Description IDEAL ClearGlide ™ Wire pulling lubricant is a polymer-based formula well suited for all electrical and datacom applications, and safe to use with all cable types. It is clear and colorless, and suitable for indoor as well as outdoor applications. This formula provides quick and easy clean up, and extraordinary lubricity for super-fast pulls. Its controlled evaporation rate is ideal for shorter runs. It remains stable over wide temperature ranges from 32°F to 180°F (0°C to 82°C) and dries to a semi-fluid film that won't clog conduit. It is convenient to apply by hand, brush, or pump, and is environmentally safe, non-toxic, non-flammable and non-corrosive for user safety. It comes in 1-qt squeeze bottle, 1-gallon bucket, 5-gallon bucket, and 55 gallon drum. Lubricant is UL listed. Feature Clear and colorless for quick and easy clean-up — great for indoor and retrofit pulls Polymer-based formula is perfect for all electrical and datacomm applications, and is safe to use with all cable types Controlled evaporation rate is ideal for shorter runs Remains stable over wide temperature ranges — usable from 32°F to 180°F (0°C to 82°C) Environmentally safe — non-toxic, non-flammable and non-corrosive Technical Information Max. Stability Range: 180F(82C) Min. Stability Range: 32F(0C) Pack Size: 5-Gallon Bucket Coefficient of Friction: 0.23 Cable Compatibility: Rubber Indoor/Outdoor: Indoor and Outdoor Lube Type: Polymer Document Catalogue Brochure

Description IDEAL ClearGlide ™ Wire pulling lubricant is a polymer-based formula well suited for all electrical and datacom applications, and safe to use with all cable types. It is clear and colorless, and suitable for indoor as well as outdoor applications. This formula provides quick and easy clean up, and extraordinary lubricity for super-fast pulls. Its controlled evaporation rate is ideal for shorter runs. It remains stable over wide temperature ranges from 32°F to 180°F (0°C to 82°C) and dries to a semi-fluid film that won't clog conduit. It is convenient to apply by hand, brush, or pump, and is environmentally safe, non-toxic, non-flammable and non-corrosive for user safety. It comes in 1-qt squeeze bottle, 1-gallon bucket, 5-gallon bucket, and 55 gallon drum. Lubricant is UL listed. Feature Clear and colorless for quick and easy clean-up — great for indoor and retrofit pulls Polymer-based formula is perfect for all electrical and datacomm applications, and is safe to use with all cable types Controlled evaporation rate is ideal for shorter runs Remains stable over wide temperature ranges — usable from 32°F to 180°F (0°C to 82°C) Environmentally safe — non-toxic, non-flammable and non-corrosive Technical Information Max. Stability Range: 180F(82C) Min. Stability Range: 32F(0C) Pack Size: 1-Gallon Bucket Coefficient of Friction: 0.23 Cable Compatibility: Rubber Indoor/Outdoor: Indoor and Outdoor Lube Type: Polymer Document Catalogue Safety Data Sheet

Description IDEAL Yellow 77 ® Wire pulling lubricant is a wax-based formula, and is the perfect general purpose lube. It is safe to use with most cable types except low-density polyethylene and semi-conducting jackets. It won't break down/separate after repeated exposure to freezing temperatures and dries to a thin, non-conductive film that won't clog conduit. Yellow 77 ® has a creamy texture and clings to cable throughout long pulls. Apply conveniently and uniformly by hand or brush. It is a homogeneous blend that requires no mixing and forms surface coat to control evaporation, so it won't dry out. It is environmentally safe, non-toxic, non-flammable and non-corrosive for user safety. Lubricant remains stable in high temperature of 32°F to 130°F (0°C to 54°C). Features Safe to use with most cable types except low-density polyethylene and semi-conducting jackets Clings to cable throughout long runs, even where moisture is present Remains temperature stable from 32°F to 130°F (0°C to 54°C) Dries slowly to a thin, non-conductive film that won’t harden in conduit Environmentally safe – non-toxic, non-flammable and non-corrosive Technical Information Max. Stability Range: 130F(54C) Min. Stability Range: 32F(0C) Pack Size: 1-Quart Squeeze Bottle Coefficient of Friction:0.17 Cable Compatibility: Rubber Indoor/Outdoor: Indoor and Outdoor Lube Type: Wax Document Wire Lubricant Selection Chart Catalogue

Description IDEAL Yellow 77 ® Wire pulling lubricant is a wax-based formula, and is the perfect general purpose lube. It is safe to use with most cable types except low-density polyethylene and semi-conducting jackets. It won't break down/separate after repeated exposure to freezing temperatures and dries to a thin, non-conductive film that won't clog conduit. Yellow 77 ® has a creamy texture and clings to cable throughout long pulls. Apply conveniently and uniformly by hand or brush. It is a homogeneous blend that requires no mixing and forms surface coat to control evaporation, so it won't dry out. It is environmentally safe, non-toxic, non-flammable and non-corrosive for user safety. Lubricant remains stable in high temperature of 32°F to 130°F (0°C to 54°C). Features Safe to use with most cable types except low-density polyethylene and semi-conducting jackets Clings to cable throughout long runs, even where moisture is present Remains temperature stable from 32°F to 130°F (0°C to 54°C) Dries slowly to a thin, non-conductive film that won’t harden in conduit Environmentally safe – non-toxic, non-flammable and non-corrosive Technical Information Max. Stability Range: 130F(54C) Min. Stability Range: 32F(0C) Pack Size: 5-Gallon Bucket Coefficient of Friction: 0.17 Cable Compatibility: Rubber Indoor/Outdoor: Indoor and Outdoor Lube Type: Wax Document Wire Lubricant Selection Chart Catalogue

Description 3M™ Wire Pulling Lubricant Gel is a translucent white polymer gel that is easy to handle and apply to wire and cable without runs or drips. The lubricant produces a low coefficient of friction that lessens the chance of cable jacket damage from high pulling forces. Not only does 3M™ Wire Pulling Lubricant Gel make wire pulling jobs smoother and safer, it also wipes off the cable quickly and cleanly before terminating or splicing. The consistent gel does not liquefy, or separate with hot or cold aging. It stays thick, smooth and ready to apply. The temperature use range is 20 degrees Fahrenheit (-6 degrees Celsius) to 110 degrees Fahrenheit (43 degrees Celsius) Features Wire pulling lubricant gel makes pulling jobs smoother and safer Low coefficient of friction means less wire damage and equipment wear for improved safety Thick formula applies faster without messy runs or drips, minimizing preparation time Colourless formula does not stain wire and cable jackets Compatibility with most wire and cable jackets enables varied applications Colourless formula does not stain wire and cable jackets Withstands a temperature range of 20 to 110 °F (-6.7 to 43 °C) UL Listed, CSA Certified and RoHS 2011/65/EU Compliant Technical Information Applications: Lubricant Brand: 3M™ Colour Family: White ETIM Class 8.0: EC002757 Lubricant Type: Gel Manufacturing Origin: USA Maximum Temperature (Celsius): 43.0 °C Maximum Temperature (Fahrenheit): 110.0 °F Minimum Temperature (Celsius): -6.7 °C Minimum Temperature (Fahrenheit): 20.0 °F Operating Temperature (Celsius): -5 to 43 Degree Celsius Operating Temperature (Fahrenheit): 20 to 110 Degree Fahrenheit Operating Temperature Range (Celsius): -5 °C to 49 °C Operating Temperature Range (Fahrenheit): 20 °F to 120 °F Product Colour: Translucent White Product Type: Gel RoHS EU Comments: RoHS 2011/65/EU compliant without exemption Tape Type: Barricade Temperature Range: 20 - 120 Degrees F (-5 - 49 Degrees C) Volume (Imperial): 1.0 qt Volume (metric): 0.95 L Document Safety Data Sheet