Hand Tools

Description Dropping screws on the job can kill your productivity. Always have a magnetic screwdriver handy with Klein Tools' Mag2 Magnetizer/Demagnetizer. This tool quickly and easily magnetizes your screwdrivers and bits to hold your fasteners on the tip of your screwdriver and get the job done fast. This compact tool is great to have on hand when you need a magnetized screwdriver or bit. Powerful rare-earth magnets provide a fast, strong, long-lasting charge. Easily attach it to your tool bag with the included stainless steel key ring. Once you have one, you'll wonder what you ever did without it. Benefits Makes your screwdriver magnetic using powerful rare earth magnets Single swipe operation provides immediate magnetization and demagnetization screwdriver tips and bits Fits most screwdrivers including precision screwdrivers, 1/4 Slotted, #2 Phillips and #3 Phillips Attaches to tool bags or backpacks with the included stainless steel key ring US patent pending No batteries required Made in the USA with global components To magnetize: insert screwdriver fully into the magnetizing slot; avoid rotating the shaft while drawing out slowly To demagnetize: insert screwdriver fully into the demagnetizing slot; avoid rotating the shaft while drawing out slowly Technical Information Application: Magnetizing / Demagnetizing Screwdrivers Overall Length: 2.203'' (56 mm) Overall Height: 0.703'' (17.9 mm) Overall Width: 1.094'' (27.8 mm) Weight: 1.1 oz (32 g) Documents Magnetizer / Demagnetizer Brochure

Description Klein Tools' Electrician's Mini Ratchet Set is the perfect solution for fastening in small, tight spaces. The 72-tooth, low-profile gearhead only needs 5-Degrees of sweep allowing professionals to fasten in spots other drivers just won't fit. The handle is designed with a finger loop for control and convenience, and is made of high-strength Chromium-Vanadium steel for increased torque and long tool life. The 1/4-Inch dual-drive head has integrated 5/16 and 1/4-Inch nut drivers. This set also comes with a versatile set of bits including #1 and #2 Phillips driver bits, 3/16 and 1/4-Inch slotted driver bits, and a 1/4-Inch drive socket adapter. So, there's no need to go back to the toolbox. Benefits Slim profile of the professional Mini Ratchet 5-Piece Set is the perfect tool for tight spaces Includes 1/4 and 5/16-Inch nut drivers, a 1/4-Inch adapter and four drive bits: #1 and #2 Phillips; 3/16 and 1/4-Inch slotted 1/4-Inch dual-drive head and socket adapter for more versatility The 72-tooth ratchet only needs a 5-Degree sweep for tight areas High-strength, steel construction increases torque and tool life Ring magnet and bit clip for better bit retention Finger loop provides one-hand driving and convenient storage Technical Information Type: Mini Ratcheting Application: Ratcheting Driver for Tight Spaces Special Features: Slim Profile Material: Steel Drive Size: 1/4'' Dual-Drive Head Type: Hex: 1/4'' and 5/16'' Standard: ASME B107-210 Set / Individual: Set: 1/4'' and 5/16'' Nut Driver; 1/4'' Socket Adapter; #1 and #2 Phillips; 3/16'' and 1/4'' Slotted Drive Bits Overall Length: 4.33'' (11 cm) Overall Height: 0.79'' (2 cm) Overall Width: 1.17'' (3 cm) Weight: 2.5 oz (71 g) Documents Brochure

Description The Staple Shark is a dual-ended tool! One end is used for pulling stubborn staples and the other acts as a multi-purpose pry bar. This unique tool provides easy staple pulling for any size of cable staple. Benefits Includes a handy nail puller and pry bar for multi-purpose use Ruler for quick on the job measurements Use as a quick carpenter’s square Holds staples in tight spots with built-in slots Open your beer at the end of the day Makes staple removal a breeze as it is sturdy and lightweight Technical Information Rack-A-Tier Product Catalog : Page # 39 Brand: Rack-A-Tiers Material: Hardened Steel (Medium or High-Carbon Steel) Part #: 52455

Description Cable skinning is very damaging to blades, so protect your personal pocket knife and stop wasting time sharpening the blade. Klein Tools' new folding cable skinning utility knife has a replaceable hawkbill blade. After a long session of cable skinning, just replace the blade and get back to work. Benefits This folding utility knife features a heavy-duty hawkbill blade that is easily replaceable to eliminate the need for sharpening Handle has rubberized grip and release lever for lockback mechanism Replaceable blade is held securely by a captive screw Thumb stud for easy opening and the pocket clip is easily accessible Replacement blades sold separately: KLE44219 Technical Information Brand: Klein Tools Features: Replaceable Blade Knife Blade Length: 2.5'' (6.4 cm) Overall Length: 7.797'' (19.8 cm) Blade Type: Hawkbill Blade Material: 440A Stainless Steel Handle Color: Orange/Black Handle Length: 4.75'' (12.1 cm) Length Closed: 4.75'' (12.1 cm) Documents Cable Skinning Utility Knife Brochure

Description The Stud Ball is a protected magnetic stud finder that will outperform any other type of magnetic stud finder on the market. Benefits Detects metal through 1/2" or 5/8" drywall, ceramic tile, and 3/4" plywood Detects screws and nails in wood walls Can find as many as 40 steel studs on a wall with 5/8 inch drywall in less than 1 minute Rare earth magnets with 27 lbs of pull Magnet stays in place without being held Perfect addition to any tool pouch Easy, convenient, and hassle-free use ** Product color may differ, comes in Red, Yellow and Blue ** Technical Information Product Catalog : Page # 34 Brand: Rack-A-Tiers Part #: 52300

Description Klein Tools' Hollow Magnetic Color-Coded Power Nut Drivers are designed with the professional in mind. Each power nut driver is made of high-grade impact steel and is color coded for easy identification. The nut drivers contain Rare-Earth magnets to securely hold fasteners, and are also extra long for reach into recessed areas. Cushion-Grip, ratcheting handle provides outstanding comfort and control. Features 6 hex sizes: 1/4-Inch, 5/16-Inch, 3/8-Inch, 7/16-Inch, 1/2-Inch, 9/16-Inch Ratcheting handle provides added utility and outstanding comfort and control 3 3/4-Inch (9.5 cm) hollow core facilitates work on threaded rod Powerful, Rare-Earth magnets to retain fasteners for one-handed driving Color coded hex sizes for easy identification 5-Inch sturdy shaft for extended reach and access Magnet size increases with each hex size to hold screws and nuts Durable finish for corrosion protection Technical Information Application: Fastening; Impact Driving; Ratcheting Driver for Tight Spaces Number of Pieces: 6 Included: 1/4'', 5/16'', 3/8'', 7/16'', 1/2'', 9/16'' Hex Sizes Measurement Standard: SAE Drive Size: 1/4'' Drive Type: Hex Special Features: Hollow Shaft, Rare-Earth Magnet, Impact Rated, Color Coded, Extended Length Material: Steel Alloy Insulated: No Handle Type: Ratcheting Quick Connect Handle Material: Plastic Handle Length: 5.19'' (13.2 cm) Shaft Length: 5'' (12.7 cm) Overall Length: 6.3'' (16 cm) Overall Height: 0.8'' (2 cm) Overall Width: 0.8'' (2 cm) Type: Nut Driver Set Weight: 1.59 lb (0.72 kg)

Description Klein Tools' Pro Folding Hex Key line features a highly durable reinforced nylon handle with easy access to each key. The heavy-duty 11-Piece set includes 4-Inch-long extended reach blades and a strategically placed #2 Phillips fastener on the outer body for effortless key tension adjustment. Klein Tools' hex sets are color-coded for quick identification: red for inch, blue for mm, and green for Torx®, enhancing efficiency. Features Pro Folding Hex Key Set with 11 extended-reach blades Key sizes: 1/2, 3/8, 5/16, 1/4, 7/32, 3/16, 5/32, 9/64, 1/8, 7/64, and 3/32-Inch High-leverage blades open independently up to 270 degrees Hex-key ends are square-cut for a secure, full-depth fit and maximum contact with the socket to prevent slippage and stripping Stores the most frequently used hex key sizes in one set Blades are made of tough, heat-treated alloy steel and range from approximately 3.5 to 4.5-inches long The reinforced nylon handle has a sturdy, comfortable grip Specifications Type: Folding Hex Key Application: Nut Driving Special Features : Extended-Reach Keys Overall Length: 6.63'' (16.8 cm) Overall Height : 2.07'' (5.3 cm) Overall Width: 1.37'' (3.5 cm) Material: Handle: Reinforced Nylon; Keys: Alloy Steel Finish: Black Phosphate Size: 1/2'', 3/8'', 5/16'', 1/4'', 7/32'', 3/16'', 5/32'', 9/64'', 1/8'', 7/64'', 3/32'' End: Flat Measurement Standard: SAE Handle Length: 6.63'' (16.8 cm) Color: Orange Key Lengths : 4'' (10.2 cm) Number of Pieces: 11 Included: (11) Fractional Inch-Sized Keys Weight: 1.09 lb (0.5 kg) UPC: 092644332845 Warnings NOT insulated. Plastic-dipped or slip-on plastic handles are NOT intended for protection against electrical shock. Do NOT extend handle length. Always wear approved eye protection. Documents Pro Folding Hex Key Set Brochure

Description Easily replace used blades with Klein's Replacement Blades exclusively designed for the Cable Skinning Utility Knif e . Benefits 3-pack replacement blades for Cable Skinning Folding Utility Knife Cat. No. 44218 Induction-hardened 440A stainless steel Heavy-duty hawkbill blade Note: to replace blade, loosen captive screw, pull old blade straight from the handle, replace with new blade and tighten the lock screw Patent US D808,749 Technical Information Blade Length: 2.5'' (6.4 cm) Overall Length: 3.25'' (8.3 cm) Material: 440A Stainless Steel Blade Type: Hawkbill Package Quantity: 3 Weight: 0.5 oz (14.1 g)

Description The Precision Flush Cutter offers added comfort for cutting applications that demand precision and control. Improved knife design snips soft wire up to 16 AWG for a flat, flush cut. The ultra-slim profile increases access in confined areas. Grips designed for greater control while the steel return spring adds comfort when making repetitive cuts. The blades are heat-treated for long life. This is your go-to tool when you want precision and control when cutting small wire, zip ties, and other fine material. Benefit Improved knife design snips wire up to 16 AWG producing a flat, flush cut Pinch cutting greatly reduces cutting effort and minimizes fly-off Grips designed for greater tool control Ultra-slim profile increases access in confined areas Heat-treated for increased durability Steel return spring for increased comfort during repetitive cutting Great for cutting small wire, zip ties and other fine material Technical Information Type: Diagonal Cutting Pliers Application: 16 AWG Overall Length: 5'' (12.7 cm) Jaw Length: 0.45'' (1.1 cm) Jaw Width: 0.26'' (0.7 cm) Jaw Thickness: 0.086'' (0.2 cm) Jaw Capacity: 0.2'' (0.5 cm) Cutting Knives: Flush Cut Style: Flush Handle Color: Red Handle Finish: Plastic Insulated: No Tether Capable: No Weight: 0.1 oz (50 g) Documents Brochure

Description Carrying a jab saw can rip or tear your tool bag. With Klein Tools Folding Jab Saw, there is no need for taped-up, homemade sheaths or big holes in your tool pouch. The fast cutting carbon steel blade is as sturdy as a fixed blade saw but folds smartly into the comfort-grip handle. The lockback mechanism secures the blade at a full 180-degrees and also at a 125-degrees for those hard to reach spots. Benefits This durable, carbon steel blade is as sturdy as fixed blade jab saws Faster cutting blade with its triple ground teeth and ability to cut in both directions Lockback mechanism secures the blade open at 125-degree and fully open at 180-degree Folded saw keeps the blade from piercing through tool pouches and bags Cushioned handle-end for easier palming of the saw Comfortable, non-slip grip handle Lanyard hole for tethering Designed to cut through drywall, wallboard, plywood, plastic, and other construction materials Technical Information Type: Folding Jab Saw Application: Penetration Cuts and Hole Making Features: Folding Teeth Per Inch: 8 Blade Length: 5.2'' (13.2 cm) Overall Length: 11.9'' (30.3 cm) Overall Height: 1.75'' (4.5 cm) Overall Width: 1.45'' (3.7 cm) Material: Plastic Handle with Rubber Grips Blade Material: Hardened Carbon Steel Weight: 8.6 oz (245 g) Documents Folding Jab Saw Specification sheet

Description The Ironworker's Kit is a 2-Piece Pliers set that includes a heavy-duty side-cutter and angled-head diagonal cutter, both used to cut soft annealed rebar tie wire. The side-cutters (Cat. No. D2000-7CST) twist tie wire and feature heavy-duty cutting knives for ASCR, screws, nails, and most hardened wire. The diagonal-cutters (Cat. No. D248-9ST) have an angled head to cut tie wire in confined spaces. Features Ironworker's Pliers 2-Piece Kit includes heavy-duty, side-cutters and angled-head, diagonal-cutters Side-Cutters (Cat. No. D2000-7CST) are used to twist and cut soft annealed rebar tie wire and feature: Heavy-duty cutting knives cut ACSR, screws, nails, and most hardened wire Knurled jaws for sure wrapping and looping plus spring-loaded action for self-opening Diagonal-Cutters (Cat. No. D248-9ST) designed for repeated cutting of tie wire and feature: Angled head to get into confined spaces High-leverage design has 36-Percent more cutting power Both tools feature ''Handform'' handles with a hook-bend for added grip and leverage Induction hardened cutting knives for long life Plastic-dipped handles for comfort and ease of identification Custom, US-made tool steel Technical Information Type: Ironworker's Plier Application: Twists and Cuts Soft Annealed Rebar Tie Wire Special Features: High-Leverage Design, Hook Handle Design Overall Length: 6.75'' (17.1 cm) Overall Height: 12.62'' (32.1 cm) Overall Width: 0.93'' (2.4 cm) Material: Steel Number of Pieces: 2 Included: Heavy-Duty Cutting Linesman Pliers (Cat. No. D2000-7CST) and High-Leverage Diagonal Cutters (Cat. No. D248-9ST) Weight: 1.9 lb (0.87 kg)

Description The Klein Tools 8.5-Inch Impact Rated Pass Through Socket Set features a pass-through head for driving hex nuts on extended threaded rod. 3/8-Inch square drive adapter allows for use with traditional sockets and includes 11 impact rated sockets. Designed with a steel handle that provides comfort in high torque applications. Features Klein KNECT™ (M) Pass Through Socket Set with 11 sockets, extension, impact adapter, 3/8-Inch square adapter, and handle Pass through head for driving hex nuts on extended threaded rod Impact rated sockets for the toughest driving applications 1/4-Inch Socket doubles as a standard 1/4-Inch bit holder 3/8-Inch Square adapter allows for use with traditional sockets Hex sizes include: 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4-Inch Stacks with other MODbox™ cases and connects on the MODbox™ Case Adapter Side Rail Attachment for easily accessibility (Cat. No. 54875MB) Technical Information Type: Impact Sockets, Pass Through Socket Wrench Application: Fasteners; Impact Driver Special Features: Pass Through Head for Driving Hex Nuts Overall Length: 8.75'' (22.2 cm) Overall Height: 1.8'' (4.6 cm) Overall Width: 3.7'' (9.4 cm) Material: Chrome-Moly, Chrome-Vanadium Drive Size: 3/8'' Socket Size: 1/4'', 9/32'', 5/16'', 11/32'', 3/8'', 7/16'', 1/2'', 9/16'', 5/8'', 11/16'', 3/4'' Number of Points: 6 Number of Pieces: 15 Included: Socket Wrench Set: (11) Sockets, Extension, Impact Adapter, 3/8-Inch Square Adapter, Handle and MODbox™ Case Weight: 2.22 lb (1.01 kg) UPC: 092644654008

Description Klein Tools’ All-in-1 Precision Screwdriver Set with compact carrying case features 39 precision bits. This set provides everything you need to work with electronics and precision fasteners including those for Apple® products such as Apple® iPhone, MacBook, and Watch. The reversible barrel is standard on one side and extra-long on the other for those hard-to-reach jobs. Powerful magnets housed in the barrel better secure the bit, which also allows it to easily pick-up and retain fasteners. The Cushion-Grip handle and spin cap provide outstanding comfort and control. Benefits Precision screwdriver set includes 39 bits for various applications including repair of most Apple® products Powerful magnets inside barrel to better retain bits, as well as pick-up and hold fasteners Reversible barrel has standard and extended-reach ends Compact carrying case features a stay-shut latch and extra-long bits for easier access Spin cap offers optimum and precise control Industrial-strength heat treated bits Cushion-Grip handles for maximum comfort Apple® is registered trademarks of Apple Inc; TORX® is a registered trademark of Acument Intellectual Properties, LLC Technical Information Application: Precision Electronics Special Features: 39 Different Precision Bits Including Bits for Apple® Products, Magnetic Phillips Bits: #000, #00, #0, #1, #2 Slotted Bits: 1 mm, 1.5 mm, 2 mm, 2.5 mm, 3 mm, 3.5 mm Square Bits: #1, #2 Hex Bits: 0.9 mm, 1.3 mm, 1.5 mm, Tamperproof: 2 mm, 2.5 mm, 3 mm, 3.5 mm TORX® Bits: T3, T4, Tamperproof: T5, T6, T7, T8, T9, T10, T15 Other Bits: Triangle: #2, #3; Pentalope: P2, P5; Triwing: Y000, Y0, Y1; Stand-Off; Spanner: #4, #6 Magnetic: Yes Shank Length: Standard: 2'' (5.1 cm); Extended: 4'' (10.2 cm) Material: Steel Bits Insulated: No Handle Type: Cushion-Grip with Spin Cap Handle Material: Acetate Handle Color: Black/Yellow Handle Length: 6.1'' (15.4 cm) Overall Length: 6.35'' (16.1 cm) Overall Height: 1.57'' (4.0 cm) Overall Width: 3.19'' (8.1 cm) Number of Pieces: 40 Type: Screwdriver Set Weight: 10 oz (284 g) Documents Brochure

Description The 9-in-1 Impact-Rated Flip Socket Set provides 8 Hex nut driver sizes and a 1/4-Inch bit holding feature in one tool. The versatility provided allows for convenient swapping between common nut driving sizes and quickly attaches to an impact driver or our 1/4-Inch quick-connect handles (handles not included). Every component is impact rated, making it an essential tool for the toughest driving applications. Features Impact-Rated Flip Socket Set includes 4 flip sockets and a 1/4-Inch bit holding feature for quick access and convenience to common sizes 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, and 3/4-Inch hex sizes Rare-Earth magnet to retain hex fasteners for convenient and easy driving Flip sockets can be stored in any order or orientation on the shaft Color coded hex sizes for easy identification Shaft and sockets are impact-rated and designed for heavy-duty applications Klein quick-connect handle easily connects to shaft for convenience on the jobsite (handle not included) Technical Information Type: Flip Socket Application: Fastening; Impact Driving Special Features: 1/4'' Bit Holding; Multi-Bit Nut Driver; Impact Rated; Flip Socket; Rare Earth Magnet Overall Length: 1.02'' (2.6 cm) Overall Height: 6.7'' (17 cm) Overall Width: 1.02'' (2.59 cm) Material: Steel Alloy Drive Size: 1/4'' Socket Size: 1/4'', 5/16'', 3/8'', 7/16'', 1/2'', 9/16'', 5/8'', 3/4'' Hex Number of Points: 6 Weight: 7.36 oz (209 g) UPC: 092644329340 Document Brochure

Description Klein Tools' Electrician's Pocket Knife is as valuable for splitting cable and stripping wire as it is for performing everyday tasks on the job site. This compact knife offers an easy one-handed, bearing-assisted opening. The superior stainless-steel blade offers great edge retention along with convenient stripping notches and a wire looping hole. The rugged, everyday knife also sports a low-carry pocket clip keeping it safely in your pocket. Benefits Electrician's pocket knife offers easy one-handed, bearing-assisted opening of the blade Superior stainless steel for better edge retention on the drop point blade Wire stripping notches on the blade strips 14-10 AWG solid, 16-12 AWG stranded wire when the blade is closed Hole at the base of the blade is convenient for looping electrical wire Rugged aluminum handle and a frame lock secures the blade in open position Compact, low-carry pocket clip and a lanyard hole for tethering Ambidextrous flip lever for easy one finger opening Technical Information Type: Pocket Knife Application: All-Purpose Special Features: Bearing-Assist Open; Wire Stripping Notches 10-14 AWG Solid/12-16 AWG Stranded, Wire Loop Hole Lock Style: Frame Blade Type: Drop Point Blade Length: 2.95'' (6.4 cm) Material: Aluminum Blade Material: Stainless Steel Retractable Blade: No Blade Thickness: 0.11'' (0.3 cm) Handle Type: Aluminum Handle Color: Black Handle Material: Aluminum Length Closed: 4.23'' (10.7 cm) Sharpenable: Yes Overall Length: 7.18'' (18.2 cm) Overall Height: 1.45'' (3.7 cm) Overall Width: 0.62'' (1.6 cm) Standard: REACH Weight: 3.6 oz (102 g) Documents Brochure

Description Klein Tools' Interchangeable Insulated Screwdriver Set includes an insulated handle and 5 interchangeable insulated blades for quick changes on the job. The auto-eject mechanism works with just a twist, allowing you to change or flip blades simply and easily. A bright orange coating of insulation protects from electrical shock, as well as being flame and impact resistant. Klein insulated tools exceed the ASTM F1505 standards for insulated tools, and are clearly marked with the official 1000-volt rating symbol. The set of five Phillips, Square and Slotted slim-tip blades come in a protective roll pouch, making this the perfect set for your tool bag. Benefits Interchangeable Insulated Screwdriver Set with an insulated handle, 5 interchangeable insulated blades, and a carrying pouch Screwdriver Set includes tip sizes: two #2 Phillips, two 1/4-Inch Slotted, one #1 Phillips, one #1 Square, one #2 Square, and one 3/16-Inch Slotted Securely and easily release the blade with a quick twist of the lock collar Interchangeable blades with a slim-tip to fit tight terminal blocks Handle and blade have a 1000-Volt insulation rating and meets or exceeds ASTM F1505 standard for insulation A layer of orange impact and flame resistant insulation protects from electric shock Cushion-Grip handles for greater torque and comfort Double-ended blades have a 3.5-Inch shaft length, single-ended blades have 5.75-Inch shaft length Durable, carrying roll pouch keeps the set organized and protected Technical Information Application: Work Near Energized Sources Special Features: Cushion-grip Handle Included: Pouch, Handle, #2PH Single-End Blade, 1/4''SL (6 mm) Single-End Blade, #1SQ / #2SQ Double-End Blade, #1PH / 3/16''SL (5 mm) Double-End Blade, and #2PH / 1/4''SL (6 mm) Double-End Blade Magnetic: No Insulated: Yes Shank Length: Double-End: 3.5'' (8.9 cm); Single-End: 5.75'' (14.6 cm) Material: Induction Hardened Steel Handle Material: Rubber, High-Dielectric Plastic Handle Color: Black/Orange Handle Length: 4.7'' (11.9 cm) Handle Diameter: 1.25'' (3.2 cm) Overall Length: 8.25'' (21.0 cm) Overall Height: 1.75'' (4.4 cm) Overall Width: 4.25'' (10.8 cm) Number of Pieces: 7 Type: Insulated, Interchangeable Blade Standard: Meets or Exceeds ASTM F1505 Weight: 14.7 oz (417 g) Document Brochure

Description These Klein Tools Lineman's Pliers are induction hardened and have a hot-riveted joint for smooth and powerful action without handle wobble. Their unique tempered handle design, with dual material Journeyman handles, provide a better grip and absorbs the "snap" when cutting wire, screws, nails or ACSR. These side-cutting pliers also have cross-hatched knurled jaws, and built-in channels for pulling fish tapes without damage. Benefits Cuts ACSR, screws, nails and most hardened wire High-leverage design. Rivet is closer to the cutting edge for 46-percent greater cutting and gripping power than other plier designs Built-in crimper works on non-insulated connectors, lugs and terminals Built-in channel pulls steel fish tape without damaging the tape Hot-riveted joint ensures smooth action and no handle wobble Induction hardened cutting knives for long life Streamlined design with sure-gripping, cross-hatched knurled jaws Unique handle tempering helps absorb the ''snap'' when cutting wire Precision-hardened plier head for on-the-job toughness Custom, US-made tool steel Dual-material Journeyman™ handles provide a better grip without sacrificing tool strength and durability Hard, black material for toughness and durability Soft material on outer surface for comfort and a firm grip Color-coded yellow, dark blue, red, or light blue handles allow quick identification of the tool Features combination polished and black-oxide finish Technical Information Type: High Leverage Side Cutting/Pulling Pliers Application: ACSR, Screws, Nails, Most Hardened Wire; Crimps Non-insulated Connectors, Lugs and Terminals; Pulls Steel Fish Tape Overall Length: 9.5'' (24.1 cm) Material: Steel Nose Type: New England Jaw Length: 1.594'' (4.1 cm) Jaw Width: 1.25'' (3.2 cm) Jaw Thickness: 1.59'' (4.1 cm) Knife Length: 0.781'' (2 cm) Handle Color: Blue/Black Handle Finish: Journeyman Handle Length: 7.375'' (18.7 cm) Insulated: No Tether Capable: No Weight: 1.1 lb (0.5 kg)

Description Croc's Strippers are the best strippers on the market. They have countless features, each designed to make your job easier and more productive. Benefits Ergonomic hourglass-shaped handles for comfort and speed Needle nose tips Strips conductor sizes from #10 down to #22 AWG (for telephone wire) Large cutting blades for easy general purpose cuts Barrel sleeve crimper near the pivot 14/2 and 12/2 NMSC stripper at the nose, makes strippers easy to use in electrical boxes 6/32 and 8/32 Screw Cutters Glow in the dark handles Colour may differ Technical Information Brand: Rack-A-Tiers Size: 11 x 7 x 1" Cabel Size: 22 to 10 AWG Cabel Type: Telephone Handle Type: Ergonomic/Hourglass Jaw Type: Needle Nose Shearing Capacity: #6-32 Bolt Series: Croc's Standard/Approvals: RoHS Compliant Part #: 47000

Description Cable Splicers Knife. Special-purpose short blade with comfortable, full-sized, heavy-duty handle. Coping-type blade made of the finest cutlery steel, tough and carefully tempered to hold its edge. Handle is textured for comfort and firm grip. Hang hole for easy storage and portability. Benefits Special-purpose short blade with comfortable, full-sized, heavy-duty handle Coping-type blade made of the finest cutlery steel, tough and carefully tempered to hold its edge Handle is textured for comfort and firm grip Hang hole for easy storage and portability Technical Information Brand: Klein Tools Blade Length: 1.75'' (4.5 cm) Handle Length: 4.406'' (11.2 cm) Overall Length: 6.25'' (15.9 cm) Material: 1095 Steel Documents Cable Splicer Knife Brochure

Description The Pocket 4-in-1 Electronics Screwdriver has a concealable tip and a pocket clip for convenient pocket storage. To use, simply slide the cuff back to expose the tip and shaft and flip the barrel to the long-side shaft to extend your reach. This driver is designed for precision work. It features a swivel cap for optimum control, outstanding comfort with our exclusive cushion-grip handle, and precision milled tips to fit screw openings securely. The corrosion-resistant anodized aluminum barrel includes two double-ended bits made of the highest quality tempered steel, carefully heat-treated for maximum strength. Benefits Electronics screwdriver with concealable tips and a pocket clip for easy pocket storage Four different tips in one tool, includes #0 and #00 Phillips plus 1/8-Inch and 3/32-Inch slotted tips Rotating cap for optimum and precise control The versatile interchangeable barrel has both a short and long side Cushion-Grip handle for maximum comfort when working on small equipment Steel bits with heat treated precision ground tips for greater strength Corrosion-resistant anodized aluminum plated barrel Technical Information Brand: Klein Tools Type: Pocket Screwdriver Application: Electronics Features: Concealable Tip; Pocket Clip Number of Pieces: 4 Phillips Bits: #00, #0 Slotted Bits: 3/32'' (0.2 cm), 1/8'' (0.3 cm) Magnetic: No Shank Length: Long 2.09'' (5.3 cm), Short 0.34'' (0.9 cm) Material: Steel Insulated: No Handle Type: Cushion-Grip Handle Material: Rubber Handle Length: 4.09'' (10.4 cm) Overall Length: 6.65'' (16.9 cm) Overall Height: 0.69'' (1.8 cm) Overall Width: 0.69 '' (1.8 cm) Documents 4-in-1 Electronics Pocket Screwdriver Brochure

Description Klein Tools’ Multi-Bit Screwdrivers help make your job a little easier. The 15-in-1 Ratcheting Screwdriver’s durable ratcheting mechanism allows for faster and easier all-day driving. With the on-board storage of 14 common bits and a 1/4-Inch nut driver, this is your new everyday screwdriver. This screwdriver features industrial-strength bits as well as Cushion-Grip handles with spin caps for outstanding comfort and control. Benefits Multi-Bit screwdriver features a durable ratcheting mechanism for faster and easier all-day driving On-board storage of 14 different double-sided screwdriver bits and a 1/4-Inch nut driver Industrial-strength bits that are conveniently housed in the handle Collar sets ratchet direction at forward, fixed and reverse Cushion-Grip handle for great torque and maximum comfort Spin cap for optimum and precise control Includes Phillips (#0, #1, #2, #3), Slotted (3/16-Inch, 1/4-Inch), Square (#1, #2), Torx® (T10, T15, T20, T25), and Combo (#1, #2) bits TORX® is a registered trademark of Acument Intellectual Properties, LLC Technical Information Application: Ratcheting Driving Special Features: Ratcheting-Directions: Forward, Fixed, Reverse; On-Board Bit Storage Nut Driver Sizes: 1/4'' (0.6 cm) Phillips Bits: #0, #1, #2, #3 Slotted Bits: 3/16'' (0.5 cm), 1/4'' (0.6 cm) Square Bits: #1, #2 Combo Bits: #1, #2 TORX® Bits: T10, T15, T20, T25 Magnetic: No Bit Retention: Ball Bearing Shank Length: 3.5'' (8.9 cm) Material: Carbon Steel Barrel Insulated: No Handle Type: Cushion Grip Handle Material: Plastic Handle Color: Black/Yellow Handle Length: 5.63'' (14.3 cm) Overall Length: 8.71'' (22.1 cm) Overall Height: 1.42'' (3.6 cm) Overall Width: 1.42'' (3.6 cm) Number of Pieces: 1 Type: Multi-Bit Ratcheting Screwdriver Weight: 10.4 oz (295 g) Document Brochure

Description Spring-Assisted Open Pocket Knife, Pocket Knife has 440A stainless steel, versatile drop point blade knife with both a fine and serrated edge. Benefits Pocket Knife has 440A stainless steel, versatile drop point blade knife with both a fine and serrated edge Liner lock keeps the knife open Spring-loaded opening mechanism enables quick, easy deployment of the blade Low-carry pocket clip allows the knife to sit low and out of the way Safety lock keeps the knife closed when stored Dual thumb studs for both left- or right-hand opening Lanyard hole for tethering Technical Information Type: Pocket Knife Application: All-Purpose Special Features: Assisted Open Lock Style: Liner Lock Blade Type: Half-Serrated Drop Point Blade Length: 3.5'' (8.9 cm) Material: Stainless Steel Blade Material: 440A Stainless Steel Blade Thickness: 0.12'' (3.0 mm) Handle Type: Skeleton Handle Color: Black Handle Material: Anodized Aluminum Length Closed: 4.6'' (11.7 cm) Sharpenable: Yes Overall Length: 8.1'' (20.6 cm) Overall Height: 1.5'' (3.8 cm) Overall Width: 0.8'' (2 cm) Weight: 5.3 oz (150 g) Documents Klein Spring Assisted Open Pocket Knife Brochure

Description Seven sizes in one tool. All sizes allow for easy, one-handed driving. The sizes are interchangeable ensuring you have the size you need when you need it. Colour coded shaft ends make it easy to identify the size. Increase your productivity and lighten your load with this multi-nut driver. Benefits Seven sizes in one tool allow for easy, one-handed driving Strong, rare earth magnets (1/4-Inch, 5/16-Inch, 11/32-Inch, 3/8-Inch, 1/2-Inch) securely hold nuts and bolts Spring coil (7/16-Inch, 9/16-Inch) holds nuts and bolts in place without the use of magnets Hollow shafts (1/4-Inch, 5/16-Inch, 3/8-Inch, 7/16-Inch, 9/16-Inch) for driving nuts deep onto bolts or threaded rod Heavy-duty handle and shaft exceed the torque performance of regular nut drivers Wrench-assist on the handle for added torque on tough jobs Color-coded bands for easy identification Includes: Handle and Assorted Color Coded Bits Technical Information Brand: Klein Tools Type: 7-in-1 Multi-bit Application: Tightening Nut Driver Sizes: 1/4'', 5/16'', 11/32'', 3/8'', 1/2'', 7/16'', 9/16'' Magnetic: Yes Material: Steel Insulated: No Handle: Cushion Grip Handle Length: 5.5'' (14 cm) Overall Length: 9.54'' (24.2 cm) Number of Pieces: 5 Documents 7-in-1 Nut Driver Brochure

Description This 5-piece tool kit features the must-have insulated tools any professional tradesperson needs including two sets of pliers, a wire stripper and two slim-tip screwdrivers. All tools meet or exceed ASTM F1505 and IEC 60900 standards for insulated tools. Benefits 5-Piece kit includes essential 1000V rated insulated tools including pliers (2), wire stripper and screwdrivers (2) All tools meet or exceed ASTM F1505 and IEC 60900 standards for insulated tools Three-part insulation with underlayer on the pliers and wire stripper provides warning sign that insulation may be compromised. VDE Certified Pliers feature induction hardened cutting knives Slim tip #2 Phillips and 1/4-Inch Cabinet tip screwdrivers allow for greater access into tight spaces Diagonal Cutters (Cat. No. 200028EINS) cut ACSR, screws, nails and most hardened wire Wire Stripper (Cat. No. 11054EINS) strips and cuts 8-16 AWG solid and 10-18 AWG stranded wire and cleanly shears 6-32 and 8-32 screws; do not use for cutting steel wire Side-Cutting Pliers ( Cat. No. 2139NEEINS) feature standard cutting knives Insulated screwdriver blades are flush with the tip to help reduce nicking the insulation Cushion-Grip screwdriver handles for greater torque and comfort Kit includes a side-cutter (Cat. No. 2139NEEINS), diagonal-cutter (Cat. No. 200028EINS), wire stripper (Cat. No. 11054EINS) and two screwdrivers (Cat. Nos. 6934INS and 6924INS) Technical Information Application: General Application Near Energized Source Special Features: Slim Profile Tips, Induction Hardened Cutting Blades and 1000V Rated Included: Cat. Nos. 2139NEEINS, 200028EINS, 11054EINS, 6934INS and 6924INS Magnetic: No Insulated: Yes Shank Length: 4'' (10.2 cm) Material: Steel Handle Material: High-Dielectric Plastic Handle Color: Orange/Black Handle Length: Varies Handle Diameter: Varies Color Code: Orange Overall Length: 10.4'' (26.4 cm) Overall Height: 13.75'' (34.9 cm) Overall Width: 1.6'' (4.1 cm) Number of Pieces: 5 Type: Insulated Standard: IEC 60900: 2012, ASTM F1505-10 Weight: 3.4 lb (1.5 kg) Documents Brochure Use and Care

Description Klein Tools Coax Cable Crimper / Wire Stripper / Wire Cutter is a premium, long lasting tool for CAT3, CAT5e and CAT6/6A cable using RJ11/RJ12 standard and RJ45 Pass-Thru connectors. Pass-Thru technology significantly reduces prep work time; wiring diagram on the tool helps eliminate rework and wasted materials. Compact, non-slip comfort grip reduces hand strain and stores easily. Benefits Modular crimp-connector installation tool for voice and data applications with Pass-Thru RJ45 connector plug Wire stripper, crimper, and cutter all-in-one tool for paired-conductor data cables Trims flush to end face of connector eliminating unintended contact between conductors Crimps and trims Klein Tools RJ45 Pass-Thru™ Connectors Crimps 4, 6 and 8 position modular connectors (RJ11/RJ12 standard and RJ45 Klein Tools Pass-Thru™) Full-cycle ratchet mechanism ensures complete connector termination On-tool wiring guide helps minimize wiring errors Cable parameters: 28-22 AWG flat or round; solid or stranded telephone and data Rubber grip for added comfort Ratcheting locking mechanism Use with Klein Tools Pass-Thru™ Connectors Not for use with standard (non Pass-Thru™) connectors Technical Information Type: Crimper Application: Cable Connection Material: Steel with Black Oxide Handle Color: Yellow/Black Cuts & Strips: Paired Conductor Data Cables Cable Type: CAT3, CAT5e, CAT6/6A Connector Type: RJ45 Klein Tools Pass-Thru™, and RJ11, RJ12 Standard Position/Pair/Conductors: 4-Position, 1-Pair/2-Conductor, 4-Position, 2-Pair/4-Conductor 6-Position, 2-Pair/4-Conductor, 6-Position, 3-Pair/6-Conductor, 8-Position, 4-Pair/8-Conductor Overall Length: 6.094'' (15.5 cm) Weight: 14.4 oz (408 g) Documents Brochure Instruction Manual

Description The full-cycle Ratcheting Crimper crimps 10-22 AWG insulated wire terminals. This tool features three crimping cavities in one tool with color-coded wire markings for three size ranges of insulated terminals. Crimper design provides low effort to crimp while maintaining a high terminal pull-off force. Built-in ratchet ensures full-cycle crimping for a uniform crimp every time. Compound lever-action of narrow-span handles puts more crimping power into each squeeze. Comfort grips help reduce hand fatigue. Benefits Crimps insulated terminals onto 10-22 AWG stranded copper wire Adjustable compound action design puts more crimping power into each squeeze Three crimping cavities in one tool: 22–16 AWG (Red), 16–14 AWG (Blue) and 12–10 AWG (Yellow) terminals Built-in ratchet ensures full-cycle crimping for a uniform crimp every time Unique cavity design provides consistent crimp from either side of the tool Dial adjusts the amount of force applied to the crimp Dual-material molded grips provide added comfort Technical Information Type: Ratcheting Crimper Application: Wire Crimping Special Features: 3 Crimping Cavities Material: Steel Handle Color: Red and Black Cable Size: 10-22 AWG Stranded Connector Type: Insulated Overall Length: 9'' (2.3 cm) Overall Height: 0.09'' (0.2 cm) Overall Width: 3'' (7.6 cm) Weight: 1.3 lb (0.6 kg) Document Brochure Instructions

Description Klein Tools' Slotted Demolition Driver is engineered, manufactured and tested for prying and chiseling. The heat-treated metal shaft runs the complete length of the handle to the metal strike cap. This transfers the impact force directly to the work surface. In addition, the plated metal strike cap protects the handle from hammer blows. Benefits Engineered, manufactured and tested for prying and chiseling Plated metal strike cap to protect the handle from hammer blows Heat treated metal shaft runs the complete length of the handle to strike cap to transfer metal strike force Technical Information Tip Type: Keystone Magnetic: No Tip Size: 5/16'' (7.9 mm) Shank Type: Round Shank Length: 7'' (17.8 cm) Overall Length: 12.375'' (31.4 cm) Handle Material: Plastic Grip Insulated: No Documents Klein Demolition Drivers Brochure

Description With Klein Tools' Cable Stapler, drive insulated staples for Voice, Data, Video, NM (Romex®) nonmetallic sheathed cable with one hand. It is designed to push the handle, rather than squeeze, for easy, consistent performance. This cast aluminum stapler adjusts for multiple sizes of staples including 1/4-, 5/16- and 11/32-Inch. Forward action design provides stability and drives the force to where the stapling is taking place. Use the lever setting to adjust the stapler force. Works solely with Klein staples (sold separately). Benefits Stapler has forward action for stability and single-handed operation Works solely with Klein Tools staples (Cat. Nos. 450-001, 450-002, 450-003) Use with insulated staples for Voice, Data, Video, NM (Romex®) nonmetallic sheathed cable Adjustable to 1/4-, 5/16- and 11/32-Inch staple sizes Adjustable channel on mounting face guides and protects cable Secured staple push rod stays attached - cannot be lost Adjustable force setting lever Two-level staple guide opening for small and large cable sizes Cast aluminum body for durability Cushion-grip handle Jam resistant Not compatible with other brands of staples Romex® is a registered trademark of Southwire Company Technical Information Type: Insulated Staples Stapler Application: Securing VDV and Romex Cable Special Features: Belt Clip, Cable Guide, Adjustable Force Setting, Forward Action Design Crown Width: Adjustable: 1/4'', 5/16'', 19/32'' Leg Length: Adjustable: 1/4'', 5/16'', 19/32'' Wire Guide: Yes Staple Capacity: 20 to 30 Handle Length: 6'' (15.2 cm) Handle Type: Soft Grip Ergonomic For Use With: Voice, Data, Video, NM (Romex®) Nonmetallic Sheathed Cable Material: Cast Aluminum Overall Length: 7.5'' (19.1 cm) Overall Height: 1.75'' (4.4 cm) Overall Width: 6.5'' (16.5 cm) Weight: 1.7 lb (0.8 kg) Document Brochure

Description The 3-in-1 Impact Flip socket allows for quick switching between drive sizes. For use on an impact driver, this versatile socket includes three hex sizes: 5/16-Inch, 1/4-inch shallow (driver) and 1/4-Inch deep (bit holder). Rare-Earth magnet holds bits and hex head fasteners. Will also fit a Klein Tools screwdriver handles (Cat. Nos. 32303 and 32304). Features 3-in-1 Impact Flip Socket allows for quick switching between drive sizes Multi-function flip socket in hex driver sizes: 5/16-Inch, 1/4-Inch shallow (driver) and 1/4-Inch deep (screwdriver bit holder) Impact rated with a 1/4-Inch Quick-Connect adapter for easy use on an impact driver Powerful Rare-Earth magnet securely holds bits and hex head fasteners 5-Inch (13 cm) length shaft also fits Klein Tools Cat. Nos. 32303 and 32304 driver handles Precision machined and heat treated for long life Great for various applications including tight spaces and long reach Technical Information Type: Impact Flip Socket Application: Fastening; Impact Driving Special Features: Flip Socket, Rare-Earth Magnet Overall Length: 5'' (13 cm) Overall Height: 0.3'' (0.8 cm) Overall Width: 0.3'' (0.8 cm) Material: Steel Drive Size: 1/4'' Socket Size: 1/4'', 5/16'' Number of Points: 6 Standard: ASME B107.2 Weight: 3.2 oz (91 g) UPC: 092644327674 Document Brochure

Description The 7-in-1 Impact Flip Socket Set provides 6 nut driver sizes plus a bit holding feature all within one compact tool. The versatility provided allows for convenient swapping between the common nut driving sizes and quickly attaches to an impact driver or our 1/4-Inch quick-connect handles (handles not included). Every component is impact-rated, making it an essential tool for the toughest driving applications. Features Hex driver sizes include: 1/4-Inch, 5/16-Inch, 3/8-Inch, 7/16-Inch, 1/2-Inch, and 9/16-Inch Impact-rated sockets for the toughest driving applications Flip sockets enable quick access and convenience to common sizes Color coded hex sizes for easy identification Store sockets in any order and orientation on the shaft Bit holding design allows the 1/4-Inch socket size to drive hex fasteners and hold screwdriver bits Flip socket set can quickly attach to an impact driver or our 1/4-Inch quick-connect driver handles for any situation Handle not included Technical Information Type: Flip Socket Application: Fastening; Impact Driving Special Features: Multi-Bit Nut Driver, Impact Rated; Flip Socket; Rare Earth Magnet Overall Length: 5'' (12.7 cm) Overall Height: 0.75'' (1.9 cm) Overall Width: 0.75'' (1.9 cm) Material: Steel Alloy Finish: Manganese Phosphate Drive Size: 1/4'' Socket Size: 1/4'', 5/16'', 3/8'', 7/16'', 1/2'' and 9/16'' Number of Points: 6 Case Included: No Included: Hex Driver Sizes: 1/4'', 5/16'', 3/8'', 7/16'', 1/2'' and 9/16'' Number of Pieces: 8 Weight: 4.32 oz (122 g) Document Brochure

Description Klein Tools’ Adjustable Length Screwdrivers function both as multi-bit screwdrivers and impact driver attachments. With these screwdrivers, there is no need to run back to your tool bag. Industrial-strength bits are conveniently housed in the handle. Simply adjust the length of the blades to allow for easier access or remove to use with an impact driver. Powerful rare earth magnets secure bits and fasteners while the Cushion-Grip handle and spin cap provide outstanding comfort and control. Benefits Multi-bit stubby screwdriver includes 7 different screwdriver bits and a 1/4-Inch nut driver Compact driver reaches easily into tight spots Industrial-strength bits that are conveniently housed in the handle Adjust the length of the blade for easier access Impact rated blade can be removed for use as an impact driver attachment Stainless steel bit holder contains powerful rare earth magnets for securing bits and fasteners Cushion-Grip handle for maximum comfort Spin cap for optimum and precise control Technical Information Application: Fastening; Impact Driving Special Features: Adjustable Length Screwdriver, Shaft Removes to be Impact Driver Attachment Nut Driver Sizes: 1/4'' (0.6 cm) Phillips Bits: #1, #2, #3 Slotted Bits: 3/16'' (0.5 cm), 1/4'' (0.6 cm) Square Bits: #1, #2 Magnetic: Yes Bit Retention: Magnetic Shank Length: 1'' to 2.75'' (2.5 to 7 cm) Material: Stainless Steel Barrel Insulated: No Handle Type: Cushion Grip Handle Material: Plastic Handle Color: Black/ Yellow Handle Length: 2.5'' (6.4 cm) Overall Length: 4.81'' (12.2 cm) Overall Height: 1.42'' (3.6 cm) Overall Width: 1.42'' (3.6 cm) Number of Pieces: 1 Type: Multi-Bit Magnetic Screwdriver Weight: 4.8 oz (136 g) Document Brochure

Description Klein Tools 6-in-1 Tap Tool quickly forms new threads and re-forms burred threads. Great for cleaning out plaster obstructions. Each tap size rethreads to the next larger size if threads are stripped. Benefits Quickly forms new threads, re-forms burred or damaged threads, and cleans out obstructions Automatically re-threads to the next larger size if threads are stripped Cushion-Grip handle for greater torque and comfort Accommodates six tap sizes: 6-32, 8-32, 10-32, 10-24, 12-24, 1/4-20 Technical Information Tap Sizes: 6-in-1 Tap 6-32, 8-32, 10-32, 10-24, 12-24, 1/4-20 Overall Length: 7.75'' (19.7 cm) Documents Cushion Grip 6-in-1 Tapping Tool Brochure

Description These heavy-duty staples are designed for safe and secure installation of NM (Romex®) cable gauges 14/3, 14/3G, 12/3 and other wire up to 19/32-Inch (15 mm) in width. For exclusive use with Klein's Loose Cable Stapler (Cat. No. 450-100). These UL listed insulated staples are available in packs of 300. Benefits Staples secure flat and round Voice, Data, Video and NM (Romex®) nonmetallic sheathed cable For NM (Romex®) cable gauges such as 14/3, 14/3G, 12/3 and other wire up to 11/32-Inch x 19/32-Inch (9 mm x 15 mm) in size Fit Klein Tools Loose Cable Stapler (Cat. No. 450-100) exclusively UL listed insulated staples are designed with plastic insulation to protect cable Special coating increases holding power Pack of 300 staples Available in other staple sizes from Klein Tools Romex® is a registered trademark of Southwire Company Technical Information Type: Insulated Application: Securing VDV and Romex Cable Special Features: Insulated to Protect Cable Jacket from Damage Crown Width: 19/32'' (15 mm) Leg Length: 7/8'' (22 mm) Gauge: 25 Wire Diameter: 19/32'' (15 mm) Color: Silver and White For Use With: CAT3/5e/6/6A Data Cable (x2, x3); RG59/6/6Q Coax Cable (x2); NM (Romex) 14-3, 14-3G, 12-3 Standards: UL Listed Material: Steel and Plastic Package Quantity: 300 Document Brochure

Description Designed and built to exceptional quality standards in a tradition spanning close to 160 years, these 9-inch high-leverage diagonal-cutting pliers feature an angled head, heavy-duty cutting knives and an extra inch of handle to provide additional leverage, reach and comfort on the job. Pick up this Klein tool and you will feel the difference. Benefits Cuts ACSR, screws, nails and most hardened wire Longer handles for added leverage, reach and comfort The high-leverage design has 67-percent more cutting power Angled head design for easy work in confined space Induction-hardened cutting knives outlast other cutters Plastic-dipped handles for comfort and ease of identification Hot-riveted joint ensures smooth action and no handle wobble Custom, US-made tool steel Technical Information Type: Diagonal Cutting High-Leverage Pliers Application: ACSR, Screws, Nails, Most Hardened Wire Overall Length: 9'' (22.9 cm) Material: Steel Jaw Length: 0.813'' (2.1 cm) Jaw Width: 1.25'' (3.2 cm) Jaw Thickness: 0.813'' (2.1 cm) Jaw Capacity: 1'' (2.5 cm) Cutting Knives: Standard Cut Style: Standard Joint Type: Hot Riveted Handle Color: Yellow Handle Finish: Plastic Dipped Handle Length: 5.703'' (14.5 cm) Insulated: No Tether Capable: No Documents 9-inch Diagonal Cutting High-Leverage Pliers Brochure

Description The Klein Tools 11-in-1 Ratcheting Impact Rated Screwdriver / Nut Driver's components are all impact rated for use with an impact driver. 1/4-Inch quick-connect on power nut drivers to easily switch from screwdriver handle to an impact driver (Impact driver not included). Ratcheting feature has three settings: forward, fixed, and reverse, facilitating easier driving. Features 11-in-1 Ratcheting Impact Rated Screwdriver and Nut Driver includes 7 screwdriver bits and 4 nut drivers Includes 11 drive ends: #1, #2 Phillips, 3/16-Inch, 1/4-Inch Slotted, #1, #2 Square, T25 TORX® and 1/4-Inch, 5/16-Inch, 3/8-Inch Power Nut Drivers, 1/2-Inch standard Nut Driver 1/4-Inch quick-connect on power nut drivers to easily switch from screwdriver handle to impact driver Collar sets ratchet direction at forward, fixed and reverse for faster and easier driving All components are impact-rated for use with an impact driver (not included) Precision machined bit tips provide a firm hold and reduce cam-out Cushion-Grip™ handle allows for greater torque and comfort TORX® is a registered trademark of Acument Intellectual Properties, LLC Technical Information Application: Fastening; Impact Driving Special Features: Ratcheting Handle, Impact Rated Components and 1/4'' Quick Connect Nut Driver Sizes: 1/4'', 5/16'', 3/8'', 1/2'' Phillips Bits: #1, #2 Slotted Bits: 3/16'', 1/4'' Square Bits: #1, #2 TORX® Bits: T25 Magnetic: No Bit Retention: Ball Detent Shank Length: 3.6'' (9.2 cm) Material: Steel Insulated: No Handle Type: Ratcheting Handle Material: Plastic Handle Color: Yellow/Black Handle Length: 4.4'' (11.2 cm) Overall Length: 8'' (20.3 cm) Overall Height: 1.25'' (3.2 cm) Overall Width: 1.25'' (3.2 cm) Number of Pieces: 11 Type: Multi-Bit Screwdriver and Nut Driver Weight: 10.8 oz (306 g) Document Brochure

Description Klein Tools' Bearing-Assisted Open pocket knife deploys smoothly with only one hand. In fact, you can engage the flip lever with just one finger. This durable yet lightweight skeleton frame knife sports a fine edge, Tanto blade. The stainless steel blade is held securely open with a frame lock. The low-setting pocket clip keeps it deep in your pocket and out of the way. Benefits Bearing-assisted opening mechanism enables smooth, easy deployment of the blade Ambidextrous flip lever for easy one finger opening Stainless steel Tanto blade is perfect for piercing and slicing Low-carry pocket clip allows the knife to sit low and out of the way Durable, lightweight skeleton frame Frame lock secures the blade open Lanyard hole for secure tethering Technical Information Brand: Klein Tools Type: Pocket Knife Application: Cutting and Slicing Lock Style: Frame Blade Type: Tanto Blade Length: 3.4'' (8.6 cm) Material: Stainless Steel Blade Material: 420HC Stainless Steel Retractable Blade: No Blade Thickness: 0.13'' (3.3 mm)Handle Type: Skeleton Handle Color: Black Handle Material: Stainless Steel Length Closed: 4.6'' (11.7 cm) Sharpenable: Yes Overall Length: 8.0'' (20.3 cm) Overall Height: 1.6'' (4.1 cm) Overall Width: 0.6'' (1.5 cm) Documents Bearing-Assisted Open Pocket Knife Brochure