Multimeters

Description Klein Tools Premium Electrical Test Kit includes a Manual-Ranging Digital Multimeter (Cat. No. MM320) with right-angle test leads, Dual Range Non-Contact Voltage Tester with Flashlight, 12 to1000 VAC (Cat. No. NCVT3P), and a GFCI Receptacle Tester with LCD (Cat. No. RT250). This convenient kit features products for a variety of applications with safety and reliability in mind. Comes with all required batteries. Features Electrical Kit with Premium Testers solve various electrical applications; Manual-Ranging Digital Multimeter, Dual Range Non-Contact Voltage Tester with Flashlight, and GFCI Receptacle Tester with LCD Digital Multimeter MM320 measures up to 600V AC/DC voltage, 10A DC current and 2MOhms resistance; also tests batteries, diodes, and continuity Voltage Tester NCVT3P has dual-range capabilities to detect from 12 to 1000 VAC or 70 to 1000 VAC for a broad variety of low-voltage or standard voltage applications Bright flashlight illuminates work area and may be used independent of voltage detection function GFCI Receptacle Tester RT250 features a large backlit LCD readout of voltage, and clear indication of wiring conditions, including patent pending detection of Open Neutral / Open Ground wiring faults LCD readout on receptacle tester shows the time required to trip a GFCI device; for use on 3-wire, North American 120V electrical outlets only Digital Multimeter MM320 includes right-angle test leads and all required batteries MM320 is CAT III safety rated for 600V Technical Information Type: Electrical Test Kit Application: Multimeter Measures up to 600V AC/DC Voltage, 10A DC Current and 2MΩ Resistance. Tests Batteries, Diodes, and Continuity Special Features: Auto Power-Off on MM320 Multimeter Material: ABS/Electronics Batteries: MM320: 2 x AAA Drop Protection: MM320: 3.3' (1 m) Display: MM320: 2000 Count LCD Functions: Hold Voltage: MM320: 600V AC/DC Current: 10A Ohms (Resistance): 2MΩ Standard: MM320: CAT III 600V; CE; UKCA Included: MM320 Manual-Ranging Digital Multimeter with Right-angle Test Leads; NCVT3P Dual Range Non-Contact Voltage Tester with Flashlight; RT250 GFCI Receptacle Tester with LCD; Instructions; and All Required Batteries Overall Length: 6.39'' (162.4 cm) Overall Height: 1.80'' (45.7 cm) Overall Width: 3.12'' (79.4 cm) Weight: 8.2 oz (231 g) Document RT250 Instructions NCVT-3P Instructions MM320 Instructions

Description Klein Tools ET250 is a solid-state, digital voltage and continuity tester. It measures AC/DC voltages up to 600V and tests for continuity. Additionally, the ET250 tests GFCI protected circuits to verify that the GFCI device is functioning appropriately. The tester includes a backlight and integrated flashlight for working in reduced ambient lighting conditions. Benefits Automatically selects voltage or continuity; automatically powers on when any measurement is attempted Backlit LCD display CAT IV 600V modern solid-state design for safety Tests GFCI protected circuits Uses standard replaceable multimeter test leads Features built-in test lead holders on the back of the meter Integrated flashlight 9.8 ft. (3 m) drop protection IP53 dust and water-resistant Technical Information Brand: Klein Tools Type: Digital Voltage and Continuity Tester Features: Built-in Test Lead Holder and Integrated Flashlight Material: Thermoplastic; Electronics Batteries: 3 x AAA Drop Protection: 9-27/32 ft (3m) Display: Digital LCD Control Type: Digital Voltage: 2 to 600V AC/DC Frequency: 45 to 400 Hz Ingress Protection: IP53 (except test lead jacks) Pollution Degree: 2 Tests Continuity: Yes Integral Lead Storage: Yes Standard: CAT IV 600V, CE Included: Test Leads, Batteries Overall Length: 6.06'' (154.0 mm) Overall Height: 1.64'' (41.7 mm) Overall Width: 2.31'' (58.8 mm) Documents Specification sheet Instruction Manual

Description Klein Tools MM420 Multimeter is an auto-ranging, true root mean square (TRMS) multimeter that measures AC/DC voltage, AC/DC current, and resistance. It can also measure temperature, capacitance, frequency, duty-cycle, and test diodes and continuity. Klein Tools’ Test and Measurement product line was exclusively designed from the ground up by electricians for electricians. Years of field research, combined with extensive input from electricians across America, inspired the development of meters and electrical testers loaded with innovative, time-saving features. Features Multimeter with automatic ranging true root mean square (TRMS) technology for increased accuracy Measures up to 600V AC/DC voltage, 10A AC/DC current and 50 MOhms resistance, continuity, temperature, capacitance, frequency, duty-cycle, and test diodes Lead Alert protection with LED illumination for lead placement and an easy-to-view backlit display Low battery indicator and easily accessible battery and fuse compartment Durable meter built to withstand a 6.6-Foot (2 m) drop Includes test leads, thermocouple with adapter, batteries and user manual CAT III 600V safety rating For use in basic and controlled electromagnetic environments such as residential, business and light-industrial locations Technical Information Type: Digital Multimeter Application: Testing and Measuring Voltage Special Features: Lead-Alert; Auto-Range; Min/Max Measurements; Backlight; Auto Power-Off; Data-Hold Material: ABS, Electrical Components Batteries: 2 x AAA Drop Protection: 6.6' (2 m) Display: 4000 Count LCD Color: Orange/Black Functions: Measures up to 600V AC/DC Voltage, 10A AC/DC Current and 50MΩ Resistance. Measures Temperature, Capacitance, Frequency, Duty-Cycle, and Test Diodes and Continuity Voltage: 600V AC/DC Frequency: 1 Hz - 50 KHz Current: 10A AC/DC Capacitance: 400 µF Ohms (Resistance): 50MΩ Standard: CAT III 600V; CE and UKCA Certified Temperature Range: -40° to 1832°F (-40° to 1000°C) Included: Test Leads, Batteries, Thermocouple, and User Manual Overall Length: 6'' (15.2 cm) Overall Height: 1.78'' (4.5 cm) Overall Width: 3.16'' (8 cm) Weight: 8.2 oz (231 g) Document Multimeter Selection Guide Instruction Manual

Description Klein Tools MM450 Multimeter is a TRMS auto-ranging slim multimeter that measures AC/DC voltage, AC/DC current, and resistance. It can also measure temperature, capacitance, frequency, duty-cycle, and test diodes and continuity. It features a high visibility, reverse contrast display with an optical sensor to automatically optimize viewing in dark or bright ambient light. The slim profile of the MM450 makes this meter almost the size of a cell phone and it conveniently fits into most pockets. The MM450 features the same quality leads you have come to expect from the Digital Multimeter line at Klein Tools. Years of field research, combined with extensive input from electricians across America, inspired the development of meters and electrical testers loaded with innovative, time-saving features. Features Multimeter with automatic ranging true root mean square (TRMS) technology for increased accuracy Measures up to 600V AC/DC voltage, 10A AC/DC current and 50 MΩ resistance, continuity, temperature, capacitance, frequency, duty-cycle, and test diodes High visibility, reverse contrast display with automatic backlight adjustment Lead-Alert protection with LEDs for test lead placement Slim profile allows multimeter to conveniently fit into most pockets Low battery indicator and easily accessible battery and fuse compartment Durable meter built to withstand a 6.6-Foot (2 m) drop Includes carrying pouch, safety rated CAT III 1000V/CAT IV 600V test leads, thermocouple with adapter and 2 x AAA batteries CAT III 600V safety rating For use in basic and controlled electromagnetic environments such as residential, business and light-industrial locations Technical Information Type: Digital Multimeter Application: Testing and Measuring Voltage Special Features: Slim Profile; Lead-Alert; High-Visibility Display with Optical Sensor; Auto-Range; Min/Max Measurements; Auto Power-Off; Data-Hold Material: ABS, Electrical Components Batteries: 2 x AAA Drop Protection: 6.6' (2 m) Display: 4000 Count LCD Color: Orange/Black Functions: Auto Power-Off; Data Hold; Auto-Range Mode; Min/Max Value of Measurement; Backlight; Lead Alert Voltage: 600V AC/DC Frequency: 1 Hz to 50 KHz Current: 10A AC/DC Capacitance: 400 µF Ohms (Resistance): 50 MΩ Standard: CAT III 600V; CE and UKCA Certified Temperature Range: -40° to 1832°F (-40° to 1000°C) Included: Carrying Pouch, Test Leads, Thermocouple with Adapter, Batteries Overall Length: 6.5'' (16.5 cm) Overall Height: 1.09'' (2.8 cm) Overall Width: 3.14'' (8 cm) Weight: 9.1 oz (258 g) Document Brochure Instruction

Description The MM320KIT Digital Multimeter Electrical Test Kit from Klein Tools is designed with reliability and safety in mind. This comprehensive kit comes with MM320 Digital Multimeter, NCVT-3P Non-Contact Voltage Tester with Flashlight, ET45 Voltage Tester, RT210 GFCI Receptacle Tester, a padded storage pouch and all required batteries. All offered in one kit for value and convenience. Features Digital Multimeter measures up to 600V AC/DC voltage, 10A DC current and 2 ohm resistance Meter also test batteries, diodes, and continuity Voltage Tester NCVT-3P has dual-range capabilities to detect from 12 to 1000 V AC or 70 to 1000V AC for a broad variety of low-voltage or standard voltage applications Bright flashlight illuminates work area and may be used independent of NCVT-3P voltage detection function ET45 tests AC voltages from 28V to 240V AC at four useful levels aligned with commonly used residential voltages, and DC voltages from 32V to 330V at four common levels Built-in test lead holder on back of ET45 holds the leads in one of two positions: one so that they are spaced correctly to test tamper-resistant US-style outlets and the other for convenient storage of the test leads RT210 detects the most common wiring problems in standard and GFCI receptacles including open ground, reverse polarity, open hot, open neutral and hot/ground reversed Receptacle tester works on GFCI outlets and confirms operation of the ground fault protective device Technical Information Type: Digital Multimeter Electrical Kit Application: Multimeter Measures up to 600V AC/DC Voltage, 10A DC Current and 2MΩ Resistance. Tests Batteries, Diodes, and Continuity Special Features: MM320: Auto Power-Off Material: ABS/Electronics Batteries: 2 x AAA Drop Protection: 3.3' (1 m) Display: MM320: 2000 Count LCD Functions: Hold Voltage: 600V AC/DC Current: 10A Ohms (Resistance): 2MΩ Standard: CAT III 600V; CE Included: MM320 Auto-Ranging Digital Multimeter with Right-angle Test Leads; NCVT3P Dual Range Non-Contact Voltage Tester with Flashlight; ET45 AC/DC Voltage Tester; RT210 GFCI Receptacle Tester; Carrying Case; Instructions; and All Required Batteries Overall Length: 6.39'' (162.4 cm) Overall Height: 1.80'' (45.7 cm) Overall Width: 3.12'' (79.4 cm) Weight: 8.2 oz (231 g) Document Brochure MM320 Instruction NCVT-3P Instruction ET45 and RT210 Instruction

Description Klein Tools Multimeter Test Kit contains Cat. No. MM300 (Manual-Ranging Digital Multimeter), Cat. No. NCVT1P (Non-Contact Voltage Tester) and Cat. No. RT105 (Receptacle Tester). The MM300 measures DC current, AC/DC voltage and resistance. The NCVT-1P automatically detects standard voltage in cables, cords, circuit breakers, lighting fixtures, switches, outlets, and wires. The RT105 detects the most common wiring problems in standard receptacles. Features The MM300 multimeter measures AC/DC voltage, DC current and resistance and has a safety rating of CAT III 600V, Class 2, Double insulation Non-Contact Voltage Tester Cat. No. NCVT1P has a bright green LED to indicate the tester is working; it changes to red and audible tones sound when voltage is detected NCVT1P has a high intensity, bright red LED that illuminates and an audible tone when voltage is detected from 50 to 1000V AC power operating range Receptacle tester detects wiring configurations and indicates correct wiring, and identifies common wiring faults Identifies open ground, open hot, open neutral, hot/ground reversed; it does not indicate quality of ground, multiple hot wires, or a combination of defects MM300 multimeter tests continuity with visual and audible continuity indicators Test leads included for Cat. No. MM300; batteries included for Cat. Nos. NCVT1P and MM300 Technical Information Type: Electrical Test Kit Application: Testing and Measuring Voltage Special Features: MM300: Low Battery Indicator; NCVT-1P: Pocket Clip Overall Length: 6'' (15.2 cm) Overall Height: 1.78'' (4.5 cm) Overall Width: 3.16'' (8 cm) Material: Polymer Body and Electronic Components Batteries: MM300: 2 x AAA; NCVT-1P: 2 x AAA Included: Manual-Ranging Multimeter, 600V (Cat.No. MM300), Non-Contact Voltage Tester Pen, 50 to 1000V AC (Cat. No. NCVT-1P), Receptacle Tester with Test Leads and Batteries (Cat. No. RT105) Standard: MM300: CAT III 600V; NCVT-1P: CAT IV 1000V Weight: 8.2 oz (231 g) Document RT105 Instruction NCVT1P Instruction MM300 Instruction Multimeter Selection Chart

Description Klein Tools MM720 Multimeter is an automatically ranging true root mean squared (TRMS) digital multimeter that measures AC/DC voltage, AC/DC current, and resistance. It can also measure temperature, capacitance, frequency, duty-cycle, diodes and continuity. It features a high visibility, reverse contrast LCD display with an optical sensor to automatically optimize viewability in dark or bright ambient lighting. Features Multimeter with automatic ranging true root mean square (TRMS) technology for increased accuracy Tester measures up to 1000V AC/DC voltage, 10A AC/DC current and 60 MOhms resistance plus temperature, capacitance, frequency, low impedance (LoZ), duty-cycle, test diodes and continuity High visibility, reverse contrast display with optical sensor to automatically optimize viewability in dark or bright ambient lighting Low Impedance (LoZ) mode for identifying and eliminating ghost or stray voltages Low battery indicator and easily accessible battery and fuse compartment Tough meter built to withstand a 6.6-Foot (2 m) drop and is rated IP42 Includes carrying pouch, test leads, thermocouple with adapter, and batteries CAT IV 600V Safety Rating For use in basic and controlled electromagnetic environments such as residential, business and light-industrial locations Technical Information Type: Digital Multimeter Application: Testing and Measuring Voltage Special Features: High-Visibility Display with Optical Sensor; Auto-Range; Min/Max/Relative; Low Impedance (LoZ) Mode; Auto Power-Off; Data Hold Material: ABS, Electrical Components Batteries: 2 x AAA Drop Protection: 6.6' (2 m) Display: 6000 Count LCD Color: Orange/Black Functions: Measures up to 1000 VAC/DC Voltage, 10A AC/DC Current and 60MΩ Resistance Plus Temperature, Capacitance, Frequency, Duty-Cycle, Diodes and Continuity Voltage: 1000V AC/DC Frequency: 1 Hz - 500 KHz Current: 10A AC/DC Capacitance: 6000 µF Ohms (Resistance): 60MΩ Ingress Protection: IP42 Standard: CAT IV 600V; CAT III 1000V Temperature Range: -40° to 1832°F (-40° to 1000°C) Included: Carrying Case, Test Leads, Thermocouple, Batteries, and User Manual Overall Length: 6.94'' (17.6 cm) Overall Height: 1.88'' (4.7 cm) Overall Width: 3.37'' (8.5 cm) Weight: 12.2 oz (345 g) Document Multimeter Selection Guide Instruction

Description Klein Tools' ET270 is an auto-ranging digital multi-tester that measures AC/DC voltage, resistance, continuity, and performs a battery test. It also tests wiring conditions in standard 120VAC and GFCI electrical receptacles and inspects North American GFCI devices. Comes with Right-Angle Test Leads, Receptacle Test Cord, Instructions, and all required batteries. Features Digital multimeter is auto-ranging and measures AC/DC voltage, resistance, audible continuity, and performs 9V and 1.5V battery tests Detects and identifies common wiring faults in standard and GFCI electrical outlets Inspects GFCI devices, including time to trip the device FIND mode indicates which breaker corresponds to a given receptacle Features include backlit display, data hold, default to auto-range with option for manual-range; max/min Receptacle test is designed for use with North American 120V AC 3-wire electrical outlets Built to withstand a 6.6-Foot (2 m) drop, this meter is designed to be durable and reliable even in demanding working environments Digital Multimeter comes with test leads, receptacle test cord, instructions, batteries, all in a convenient storage pouch Technical Information Type: Digital Multimeter and GFCI Receptacle Tester Application: Testing and Measuring Voltage; Detects and Identifies Common Wiring Problems in GFCI Receptacles Special Features: Data Hold; Auto-Range with Option for Manual-Range; Min/Max Values; Backlight Material: ABS and Electrical Components Batteries: 2 x AAA Drop Protection: 6.6' (2 m) Display: 4000 Count LCD Color: Orange/ Black Functions: AC/DC Voltage; Resistance; Continuity; Battery Test; Finds Breaker to Corresponding Receptacle; Shows Amount of Time it Takes to Trip GFCI; Detects and Identifies Common Wiring Problems in GFCI Receptacles Voltage: 600V AC/DC Frequency: 50 to 60Hz Ohms (Resistance): 40MΩ Standard: CAT III 600V, Class 2, Double insulation Accuracy: 65°F to 83°F (18°C to 28°C): +/- (% of Reading + Number of Least Significant Digits) Included: Digital Multimeter; Right-Angle Test Leads; Receptacle Test Cord; Batteries; User Manual; Storage Pouch Overall Length: 6.41'' (16.3 cm) Overall Height: 1.84'' (4.5 cm) Overall Width: 3.13'' (7.9 cm) Weight: 1.32 lb (0.6 kg) Document Brochure Instruction Manual

Description Klein Tools MM325 Multimeter is a manual-ranging multimeter that measures AC/DC voltage, DC current, and resistance. It can also test batteries, diodes, and continuity. Klein Tools’ Test and Measurement product line was exclusively designed from the ground up by electricians for electricians. Years of field research, combined with extensive input from electricians across America, inspired the development of meters and electrical testers loaded with innovative, time-saving features. Features Multimeter measures up to 600V AC/DC voltage, 10A DC current, 2 MOhms resistance, continuity, batteries, and diodes Lead Alert protection with LED's for test lead placement Easy-to-view backlit display for low light environments Low battery indicator and easily accessible battery and fuse compartment Durable meter built to withstand a 6.6-Foot (2 m) drop Includes test leads, batteries and user manual CAT III 600V safety rating For use in basic and controlled electromagnetic environments such as residential, business and light-industrial locations Technical Information Type: Digital Multimeter Application: Testing and Measuring Voltage Special Features: Lead Alert; Backlight; Auto Power-Off; Data Hold Material: ABS and Electrical Components Batteries: 2 x AAA Drop Protection: 6.6' (2 m) Display: 2000 Count LCD Color: Orange/ Black Functions: Measures up to 600V AC/DC Voltage, 10A DC Current and 2MΩ Resistance; Tests Batteries, Diodes and Continuity Voltage: 600V AC/DC Current: 10A DC Ohms (Resistance): 2MΩ Standard: CAT III 600V; CE and UKCA Certified Included: Test Leads, Batteries, and User Manual Overall Length: 6.41'' (16.2 cm) Overall Height: 1.83'' (4.6 cm) Overall Width: 3.13'' (7.9 cm) Weight: 8.8 oz (250 g) Document Multimeter Selection Guide Instruction Manual

Description The Fluke TL71 Premium Multimeter Test Lead Set is a pair of comfort grip probes (red and black) with flexible silicone-insulated, right-angle test leads. These distinctive comfort grip probes are heat and cold resistant. As with all Fluke products, these test leads undergo a battery of safety tests to be rated at: CAT II 1000 V, 10 A rating CAT III 1000 V, CAT IV 600V with protective cap The WearGuard™ test lead indicator shows wear and tear easier. It exposes a contrasting color when the leads are damaged and need to be replaced. Silicone-insulated leads have superior flexibility in cold temperatures and resistance to high temperatures. The Fluke TL71 Premium Test Leads are compatible with all instruments that accept standard 4 mm (0.16 in) shrouded banana connectors. Some of the compatible tools include: Fluke 902 FC True-RMS HVAC Clamp Meter Fluke 87V Industrial Multimeter Fluke 115 Field Technicians Digital Multimeter Fluke 787B ProcessMeter™ These test leads come with a one-year warranty. Features One pair comfort grip probes with right-angle test leads WearGuard ™ indicator exposes contrasting color when damaged Recommended for µV measurements Technical Information Lead Length 1.2 (4 ft), 2mm diameter probe tip Category Rating CAT II 1000 V, CAT III 1000 V, CAT IV 600 V, 10 A max Operating temperature -20°C to 55°C (-4°F to 131°F), 90 % RH altitude: 2000 m (6,562 ft) Document Datasheet

Description Give your Fluke tools the protection they deserve. You bought the best, why not protect them with Fluke cases. The C25 carrying case is a durable, zippered carrying case with padding and inside pocket, and high quality polyester exterior. It includes a convenient hand strap and carries most of Fluke’s popular digital multimeters. Our most popular case sold to date! Now available in standard and camouflage designs. Features Zippered carrying case with padding and inside pocket. One year warranty Technical Information Dimensions (H x W x D) 218 x 128 x 64 mm 8.6 x 5 x 2.52 in

Description The Fluke 179 True-rms Digital Multimeter is the industry-standard troubleshooting tool for electrical and electronic systems. This incredibly versatile multimeter makes a perfect front-line troubleshooting tool with an input protection rating of CAT III 1000 V, CAT IV 600 V. The built-in temperature measurement with the included thermocouple, analog bar graph and backlit digital display make it easier to take the measurements you need. A full set of basic and advanced troubleshooting capabilities including: Manual and automatic ranging Display Hold and Auto Hold Min/Max-Average recording Voltage measurements to 1000 V AC or DC Current measurements to 10 A AC/DC Resistance to 50 MΩ; capacitance to 10,000 μF, frequency to 100 kHz; temperature from -40 ℃ to 400 ℃ All of these features come paired with a lifetime warranty. Features 1000V AC/DC; 10A AC/DC (with test leads and current jacks); resistance to 50 MΩ; capacitance to 10,000 μF, frequency to 100 kHz; temperature from -40 ℃ to 400 ℃ Robust, fast and accurate with manual and automatic ranging, Display Hold, Auto Hold, and Min/Max-Average recording Backlit digital display, analog bar graph, and built-in temperature measurements with included thermocouple. Technical Information Specifications Voltage DC Accuracy 1 ±(0.09% + 2) Max. resolution 0.1 mV Maximum 1000 V Voltage AC Accuracy 1 ±(1.0% + 3) Max. resolution 0.1 mV Maximum 1000 V Current DC Accuracy 1 ±(1.0% + 3) Max. resolution 0.01 mA Maximum 10 A Current AC Accuracy 1 ±(1.5% + 3) Max. resolution 0.01 mA Maximum 10 A Resistance Accuracy 1 ±(0.9% + 1) Max. resolution 0.1 Ω Maximum 50 MΩ Capacitance Accuracy 1 ±(1.2% + 2) Max. resolution 1 nF Maximum 10,000 µF Frequency Accuracy 1 ±(0.1% + 1) Max. resolution 0.01 Hz Maximum 100 kHz Temperature Accuracy 1 ±(1.0% + 10) Max. resolution 0.1°C Range -40°C / 400°C 1. Accuracies are best accuracies for each function Environmental Specifications Operating temperature -10°C to +50°C Storage temperature -30°C to +60°C Humidity (without condensation) 0% – 90% (0°C – 35°C) 0% – 70% (35°C – 50°C) Safety Specifications Overvoltage category EN 61010–1 to 1000 V CAT III EN 61010–1 to 600 V CAT IV Agency approvals UL, CSA, TÜV listed and VDE Pending Mechanical and General Specifications Size 43 x 90 x 185 mm Weight 420 g Warranty Lifetime Battery life Alkaline ~200 hours typical, without backlight Document User's Manual

Description The Fluke 117 Electricians Multimeter is a compact, CAT III 600 V, True-rms meter that includes an easy-to-use interface with a bright backlight for darker worksites. It saves you time and enables you to move from job to job more quickly. With a quick turn of the dial you can get measurements for: Resistance Continuity Frequency Capacitance Min/Max/Average A digital multimeter designed to be hauled everywhere with you, part of your everyday tools. The 117 is built for demanding applications like: Commercial buildings Hospitals Schools Keep yourself safer with integrated VoltAlert™ technology. Fast, go/no go non-contact voltage detection built into your multimeter saves you from having to carry around or find an extra tool to get the work started. Set the dial and get your measurement quickly with AutoVolt. This automatic AC/DC voltage selector makes it easier for you to get the measurement you need and move on quicker. What's in the box: Fluke 117 Digital Multimeter (1 pair) 4 mm silicone test lead set Holster Quick reference guide Features Compact, true-rms digital multimeter for electricians Includes multimeter, 4mm silicone test leads, holster and manual Integrated non-contact voltage detection keeps you safe Prevent false readings from ghost voltage with selectable low-impedance mode Technical Information Specifications Maximum voltage between any terminal and earth ground 600 V Safety IEC 61010-1: Pollution Degree 2 IEC 61010-2-033: CAT III 600V Fuse for A input 11 A, 1000 V FAST Fuse (Fluke PN 803293) Display Digital: 6,000 counts, updates 4 per second Bar graph 33 segments, updates 32 per second Operating temperature -10°C to +50°C Storage temperature -40°C to +60°C Battery type 9 volt Alkaline, IEC 6LR61 Battery life 400 hours typical, without backlight Accuracy Specifications DC millivolts Range/resolution 600.0 mV / 0.1 mV Accuracy ±([% of reading] + [counts]): 0.5% + 2 DC volts Range/resolution 6.000 V / 0.001 V 60.00 V / 0.01 V 600.00 V / 0.1 V Accuracy ±([% of reading] + [counts]): 0.5% + 2 Auto volts Range/resolution 600.0 V / 0.1 V Accuracy 2.0% + 3 (DC, 45 Hz to 500 Hz) 4.0% + 3 (500 Hz to 1 kHz) AC millivolts¹ True RMS Range/resolution 600.0 mV / 0.1 mV Accuracy 1.0% + 3 (DC, 45 Hz to 500 Hz) 2.0% + 3 (500 Hz to 1 kHz) AC volts¹ True RMS Range/resolution 6.000 V / 0.001 V 60.00 V / 0.01 V 600.0 V / 0.1 V Accuracy 1.0% + 3 (DC, 45 Hz to 500 Hz) 2.0% + 3 (500 Hz to 1 kHz) Continuity Range/resolution 600 Ω / 1 Ω Accuracy Beeper on 250 Ω detects opens or shorts of 500 μs or longer. Ohms Range/resolution 600.0 Ω / 0.1 Ω 6.000 kΩ / 0.001 kΩ 60.00 kΩ / 0.01 kΩ 600.0 kΩ / 0.1 kΩ 6.000 MΩ / 0.001 MΩ Accuracy 0.9% + 1 Range/resolution 40.00 MΩ / 0.01 MΩ Accuracy 5% + 2 Diode test Range/resolution 2.00 V / 0.001 V Accuracy 0.9% + 2 Capacitance Range/resolution 1000 nF / 1 nF 10.00 μF / 0.01 μF 100.0 μF / 0.1 μF 9999 μF / 1 μF 100 μF to 1000 μF Accuracy 1.9% + 2 Range/resolution > 1000 μF Accuracy 5% + 20% Lo-Z capacitance Range 1 nF to 500 μF Accuracy 10% + 2 typical AC amps True RMS (45 Hz to 500 Hz) Range/resolution 6.000 A / 0.001 A 10.00 A / 0.01 A Accuracy 1.5% + 3 20 A continuous overload for 30 seconds max DC amps Range/resolution 6.000 A / 0.001 A 10.00 A / 0.01 A Accuracy 1.0% + 3 20 A continuous overload for 30 seconds max Hz (V or A input)² Range/resolution 99.99 Hz / 0.01 Hz 999.9 Hz / 0.1 Hz 9.999 kHz / 0.001 Hz 50.00 kHz / 0.01 Hz Accuracy 0.1% + 2 1. All AC voltage ranges except Auto-V/LoZ are specified from 1% to 100% of range. Auto-V/LoZ is specified from 0.0 V. 2. Temperature uncertainty (accuracy) does not include the error of the thermocouple probe. 2. Frequency is AC coupled, 5 Hz to 50 kHz for AC voltage. Frequency is DC coupled, 45 Hz to 5 kHz for AC current. 2. Temperature Range/Resolution: -40°F to 752°F / 0.2°F. Mechanical and General Specifications Size 167 x 84 x 46 mm (6.57 x 3.31 x 1.82 in) Weight 550 g Warranty 3 years Document User's Manual

Description The Fluke 233 Digital Multimeter with its removable display gives you the flexibility to take measurements in hard to reach places or in areas with restricted access. You can be in two places at once and reduce the risk of arc flash by separating yourself from hazardous measurement situations. Just connect the meter to the test point and then place the display in a location up to 10 meters (33 ft.) away where you can see it. No more having to stretch into tight spots or hard to reach locations to take measurements. No more having to hold both the meter and the test leads to make a measurement. The Fluke 233 is ideal for any application where the measurement point is separated from controls or where you can't stay close to the meter during measurements due to hazards, moving machinery or in clean rooms. Plus, it features True RMS AC voltage and current for accurate measurements on non-linear signals. Features True RMS Digital Multimeter with detachable display Measures up to 1000 VAC and DC Measures up to 10 A (20 A for 30 seconds) Provides a 10,000 μF capacitance range Measures frequency to 50 kHz Includes a built-in thermometer to measure temperature without a separate instrument Radio transmitter automatically turns off the when the display is connected to the meter so you can use it as a conventional multimeter Easy to read display with large digits and bright backlight Delivers approximately 400 hours of battery life Offers resistance, continuity, and diode test Features a removable magnetic display that can be conveniently mounted where it can be easily seen Low power wireless technology allows the display to be moved up to 10 meters (33 ft.) away from the point of measurement, without causing measurement interference Allows you to take measurements without holding the meter, to improve visual focus on probes and augment safe electrical measurements Provides auto power-off to maximize battery life Features Min/Max, and Average recording to capture variations automatically Technical Information Accuracy specifications DC voltage Range 0.1 mV to 1000 V Accuracy 0.25% + 2 AC voltage Range 0.1 mV to 1000 V Accuracy 1.0% + 3 DC current Range 1 mA to 10 A Accuracy 1.0% + 3 AC current Range 1 mA to 10 A Accuracy 1.5% + 3 Resistance Range 0.1 Ω to 40 MΩ Capacitance Range 1 nF to 9999 μF Resolution 1nF Frequency Range 5 Hz to 50 kHz Resolution 0.01 Hz Counts 6000 Temperature -40°C to +400°C Power AA batteries: Three for main body two for display Battery life 400 hours Wireless frequency 2.4 GHz ISM Band 10 meter range Safety rating CAT IV 600 V , CAT III 1000 V General specifications Basic features AC true-rms Yes Ranging Auto/manual Display Backlight Yes Data storage Min/Max/Avg Yes Other features Battery type AA alkaline Removable display Yes Warranty and protection Safety rating CAT IV 600 V/CAT III 1000 V External protection Rubber overmold Warranty Three-years Size (H x W x L) 5.3 x 9.3 x 19.3 cm (2.08 x 3.6 x 7.6 in) Weight 604 g (1.3 Ib) Document Datasheet User's Manual Quick Reference

Description Having the right tool for the job is essential. Having all the right tools when you need them is even better. The Fluke 116/323 HVAC Combo Kit gives you the best in a versatile, rugged multimeter and a fast-acting, general purpose clamp meter. The Fluke 116 comes with the Fluke 80BK-A integrated DMM temperature probe; no need to carry a separate thermometer. The microamp function allows flame sensor measurement down to 0.1 microamps. The AutoV/LoZ function prevents false readings caused by ghost voltage. The Fluke 116 also has a large white LED backlight for work in poorly lit areas. It measures resistance, continuity, frequency, and capacitance and provides Min/Max/Average readings with elapsed time to record signal fluctuations. Fluke 116 multimeters are independently tested for safe use in CAT III 600 V environments. True RMS measurements and optimized ergonomics make the Fluke 323 True RMS Clamp Meter the best general purpose clamp meter for commercial and residential electricians. The Fluke 323 model is ideally suited for current measurements up to 400 A in tight cable compartments. Together, the Fluke 116 HVAC Multimeter and 323 True RMS Clamp Meter give electricians the right tools for the job. Features Fluke 116 Digital Multimeter. Designed by Electricians. Engineered by Fluke. Built-in thermometer for HVAC applications Microamps to test flame sensors Low input impedance: helps prevent false readings due to ghost voltage Large white LED backlight to work in poorly lit areas Resistance, continuity, frequency and capacitance Min/Max/Average with elapsed time to record signal fluctuations Compact ergonomic design for one-handed operation Compatible with optional magnetic hanger (ToolPak™) CAT III 600 V safety rated Fluke 323 True-rms Clamp Meter. Rugged. Reliable. Precise. 400 A AC current measurement 600 VAC and DC voltage measurement True RMS AC voltage and current for accurate measurements on non-linear signals Resistance measurement up to 40 kΩ with continuity detection Slim, ergonomic design CAT IV 300 V/CAT III 600 V safety rating 116 Technical Information Specifications Maximum voltage between any terminal and earth ground 600 V Surge protection 6 kV peak per IEC 61010-1 600 V CAT III, Pollution Degree 2 Display 6,000 counts, updates 4 per second Bar graph 33 segments, updates 32 per second Operating temperature -10°C to +50°C Storage temperature -40°C to +60°C Battery type 9 volt Alkaline, NEDA 1604A/ IEC 6LR61 Battery life 400 hours typical, without backlight Accuracy Specifications DC millivolts Range/Resolution 600.0 mV / 0.1 mV Accuracy ±([% of reading] + [counts]): 0.5% + 2 DC volts Range/Resolution 6.000 V / 0.001 V 60.00 V / 0.01 V 600.00 V / 0.1 V Accuracy ±([% of reading] + [counts]): 0.5% + 2 Auto volts Range/Resolution 600.0 V / 0.1 V Accuracy 2.0% + 3 (DC, 45 Hz to 500 Hz) 4.0% + 3 (500 Hz to 1 kHz) AC millivolts¹ True RMS Range/Resolution 600.0 mV / 0.1 mV Accuracy 1.0% + 3 (DC, 45 Hz to 500 Hz) 2.0% + 3 (500 Hz to 1 kHz) AC volts¹ True RMS Range/Resolution 6.000 V / 0.001 V 60.00 V / 0.01 V 600.0 V / 0.1 V Accuracy 1.0% + 3 (DC, 45 Hz to 500 Hz) 2.0% + 3 (500 Hz to 1 kHz) Continuity Range/Resolution 600 Ω / 1 Ω Accuracy Beeper on 250 Ω; detects opens or shorts of 500 μs or longer. Ohms Range/Resolution 600.0 Ω / 0.1 Ω 6.000 kΩ / 0.001 kΩ 60.00 kΩ / 0.01 kΩ 600.0 kΩ / 0.1 kΩ 6.000 MΩ / 0.001 MΩ Accuracy 0.9% + 1 Range/Resolution 40.00 MΩ / 0.01 MΩ Accuracy 1.5% + 2 Diode test Range/Resolution 2.000 V / 0.001 V Accuracy 0.9% + 2 Capacitance Range/Resolution 1000 nF / 1 nF 10.00 μF / 0.01 μF 100.0 μF / 0.1 μF 9999 μF / 1 μF 100 μF to 1000 μF Accuracy 1.9% + 2 Range/Resolution > 1000 μF Accuracy 5% + 20% LoZ capacitance Range 1 nF to 500 μF Accuracy 10% + 2 typical Temperature² (Type-K thermocouple) Range/Resolution -40°C to 400°C / 0.1°C Accuracy 1% + 10² Range/Resolution -40°F to 752°F / 0.2°F Accuracy 1% + 18² AC μamps True RMS (45 Hz to 500 Hz) Range/Resolution 600.0 μA / 0.1 μA Accuracy 1.0% + 2 DC μamps Range/Resolution 600.0 μA / 0.1 μA Accuracy 1.0% + 2 Hz (V or A input)² Range/Resolution 99.99 Hz / 0.01 Hz 999.99 Hz / 0.1 Hz 9.999 Hz / 0.001 Hz 50.00 Hz / 0.01 Hz Accuracy 0.1% + 2 1. All AC voltage ranges except Auto-V/LoZ are specified from 1% to 100% of range. Auto-V/LoZ is specified from 0.0 V. 2. Temperature uncertainty (accuracy) does not include the error of the thermocouple probe. • Frequency is AC coupled, 5 Hz to 50 kHz for AC voltage. Frequency is DC coupled, 45 Hz to 5 kHz for AC current. • Temperature Range/Resolution: -40°F to 752°F / 0.2°F Mechanical and General Specifications Size 167 x 84 x 46 mm (6.57 x 3.31 x 1.82 in) Weight 550 g Warranty 3 years 323 Technical Information Specifications AC current Range 400.0 A Accuracy 2% ±5 digits (45 Hz to 65 Hz) 2.5% ±5 digits (65 Hz to 400 Hz) AC voltage Range 600.0 V Accuracy 1.5% ±5 digits DC voltage Range 600.0 V Accuracy 1.0% ±5 digits Resistance Range/Resolution 400.0 Ω/ 4000 Ω Accuracy 1.0% ±5 digits Continuity ≤ 70 Ω AC response True-rms Data hold Yes Size H x W x D (mm) 207 x 75 x 34 Max wire diameter 30 mm (600 MCM) Weight 265 g Category rating CAT III 600 V CAT IV 300 V Warranty Two-year Document 323 User's Manual 323 Quick Reference 323 Brochure 116 Quick Reference 116 User's Manual

Description The Fluke 789 ProcessMeter is the ultimate troubleshooting tool for electricians and instrumentation professionals, combining the functionality of a loop calibrator with the power of a digital multimeter. By equipping the 789 with a temperature measurement module and the wireless data logging capabilities of Fluke Connect® with ShareLive™ video call, process technicians can now do a lot more while carrying a lot less. And with its built-in, selectable 250 ohm HART® resistor, it eliminates the need to carry a separate resistor with you. Use the included FC Connector with the Fluke 789 and get the full benefits of the Fluke Connect® app. Download it now and get started. Features Unique new wireless measurement logging capability Temperature measurement from -200 °C to 1372 °C using the t3000 FC 24 V Loop power supply HART mode setting with loop power (adds 250 ohm resistor) 100% larger dual display 1200 ohm drive capability on mA source Enhanced backlight with two brightness settings 0% to 100% mA Span Check buttons to toggle between 4 and 20 mA Infrared I/O serial port compatible with FlukeView® Forms Software Version 2.1 Externally accessible fuses for easy replacement DMM designed to meet 1000 volt IEC 1010 CAT III standards Precision 1000 V, 440 mA True-RMS digital multimeter Frequency measurement to 20 kHz Min/Max/Average/Hold/Relative modes Diode test and continuity beeper Simultaneous mA and% of scale readout 20 mA DC current source/loop calibrator/ simulator Manual Step (100%, 25%, Coarse, Fine) plus Auto Step and Auto Ramp Externally accessible battery for easy battery changes Technical Information Specifications Current measurement Range 0-1 A AC or DC Resolution 1 mA Accuracy 0.2% + 2 LSD (DC) Range 0-30 mA Resolution 0.001 mA Accuracy 0.05% + 2 lSD Current sourcing Range 0-20 mA or 4-20 mA Resolution 0.05% of span Drive capability 24 V Compliance or 1200 Ω @ 20 mA Frequency to 19.999 kHz, 0.005% + 1 LSD Continuity Beeps for resistance 28°C) Safety Specifications Electrical safety Designed in accordance with IEC 1010-1, ANSI/ISA S82.01-1994 and CAN/CSA C22.2 No 1010.1-92 Overvoltage category IEC 1010-1 CAT III 1000 V IEC 1010-1 CAT IV 600 V Maximum voltage 1000 V RMS Mechanical and General Specifications Size (H x W x L) 50 x 100 x 203 mm (1.25 x 3.41 x 7.35 in) Weight 610 g (1.6 lbs) Batteries 4 AA alkaline batteries Warranty 3 years Battery life 140 hours typical (measurement), 10 hours typical (sourcing 20 mA) Shock and vibration Random, 2 g, 5-500 Hz 1 meter drop test Fluke t3000 FC Wireless K-Type Temperature Module General Specifications Range K-Type -200°C to 1372°C Resolution 0.1°C Accuracy ±[0.5% + 0.5°C] counts Input terminals K-type mini LCD w/backlight 3 ½ digits Log rate/interval 1 sec minimum/adjustable by PC Battery type 2 AA, NEDA 15 A, IEC LR6 Battery life 400 hours Memory Record up to 65,000 readings RF communications 2.4 GHZ ISM Band RF communication range Open air, unobstructed Up to 20 m Obstructed, sheetrock wall Up to 6.5 m Obstructed, concrete wall or steel electrical enclosure Up to 3.5 m Operating temperature -10°C to +50°C Storage temperature -40°C to +60°C Temperature coefficient 0.01% of reading +0.03°C per °C Temperature scale ITS-90 Operating humidity 90% at 35°C, 75% at 40°C, 45% at 50°C Altitude Operating 2,000 m Storage 12,000 m EMC EN 61326-1:2006 Safety compliance IEC 61010-1, CAT I, 3rd edition Pollution Degree 2 Certifications CSA, CE, FCC: T68-FBLE IC: 6627A-FBLE Ingress Protection (IP) rating IP42 Pollution Degree 2 Size (H x W x D) 16.5 x 6.35 x 1.4 cm (6.5 x 2.5 x 1.4 in) Weight .22 kg (8 oz) Not compatible with Fluke CNX test tools Document Datasheet

Description Keep yourself safe. Find hidden problems faster. Put the paperwork down. Fluke Connect + Fluke's 1587 FC Insulation Multimeter helps you identify tough problems, fix, and wirelessly communicate your work quickly and easily - all at a safe distance. Add diagnostics with Fluke Connect The Fluke 1587 FC is Fluke Connect-enabled so you can download the free Fluke Connect® Measurements app to your smartphone. Includes: Remote probe Test leads Alligator clips K-type thermocouple Soft case User documentation Features Safety first. Keep yourself out of harm’s way by monitoring your test measurements remotely. Prove your job is done right by quickly seeing and sharing measurement results wirelessly with your smartphone. Quickly find problems by saving and comparing measurements over time on a wireless device. PI/DAR timed ratio tests with TrendIt™ graphs to identify moisture and contaminated insulation problems faster Memory storage through Fluke Connect that saves measurements to your phone or the cloud and eliminates the need to write down results. Reduces errors and saves data for historical tracking over time Temperature compensation to establish accurate baselines and relevant historical comparisons Historical tracking and trending of assets to identify insulation degradation over time and allow real-time decisions to be made in the field with Fluke Connect® Assets (sold separately) Provides memory storage through Fluke Connect Measurements to eliminate the need to write down results Includes live circuit detection to prevent insulation test if voltage >30 V is detected Provides automated temperature compensation to establish accurate baselines Supports historical tracking and asset trending of assets to identify degradation over time with Fluke Connect® Assets (sold separately) Incorporates VFD low-pass filter for accurate variable frequency motor drive measurements Includes auto-discharge of capacitive voltage for added user protection Measures ac/dc voltage, dc millivolts, ac/dc milliamps, resistance, and continuity Includes capacitance, diode test, temperature, min/max, frequency measurements and insulation test smoothing reading Automatically powers off to save battery power Comes with remote probe, test leads, alligator clips, K-type thermocouple, hard case, and three-year warranty. Technical Information Electrical Specifications AC voltage measurement Range 600.0 mV Resolution 0.1 mV Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts) ±(1% + 3) Accuracy 60 Hz to 5000 Hz ±(% of Rdg + Counts) ±(2% + 3) 6.000 V Resolution 0.001 V Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts) ±(1% + 3) Accuracy 60 Hz to 5000 Hz ±(% of Rdg + Counts) ±(2% + 3) 60.00 V Resolution 0.01 V Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts) ±(1% + 3) Accuracy 60 Hz to 5000 Hz ±(% of Rdg + Counts) ±(2% + 3) 600.0 V Resolution 0.1 V Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts) ±(1% + 3) Accuracy 60 Hz to 5000 Hz ±(% of Rdg + Counts) ±(2% + 3)¹ 1000 V Resolution 1 V Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts) ±(2% + 3) Accuracy 60 Hz to 5000 Hz ±(% of Rdg + Counts) ±(2% + 3)¹ ¹ 1 kHz bandwidth Low-Pass Filter Voltage Range 600.0 mV Resolution 0.1 mV Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts) ±(1% + 3) Accuracy 60 Hz to 400 Hz ±(% of Rdg + Counts) +(2% + 3), -(6% - 3) 6.000 V Resolution 0.001 V Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts) ±(1% + 3) Accuracy 60 Hz to 400 Hz ±(% of Rdg + Counts) +(2% + 3), -(6% - 3) 60.00 V Resolution 0.01 V Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts) ±(1% + 3) Accuracy 60 Hz to 400 Hz ±(% of Rdg + Counts) +(2% + 3), -(6% - 3) 600.0 V Resolution 0.1 V Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts) ±(1% + 3) Accuracy 60 Hz to 400 Hz ±(% of Rdg + Counts) +(2% + 3), -(6% - 3) 1000 V Resolution 1 V Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts) ±(2% + 3) Accuracy 60 Hz to 400 Hz ±(% of Rdg + Counts) +(2% + 3), -(6% - 3) DC Voltage Measurement Range Resolution Accuracy ±(% of Rdg + Counts) 6.000 V dc 0.001 V ±(0.09% + 2) 60.00 V dc 0.01 V ±(0.09% + 2) 600.0 V dc 0.1 V ±(0.09% + 2) 1000 V dc 1 V ±(0.09% + 2) Input impedance 10 MΩ (nominal), 60 dB @ 50 Hz or 60 Hz Common mode rejection ratio >120 dB @ dc, 50 Hz or 60 Hz (1 k unbalance) Accuracies apply to ± 100% of range DC Millivolts Measurement Range Resolution Accuracy ±(% of Rdg + Counts) 600.0 mVdc 0.1 mV ±(0.1% + 1) DC and AC Current Measurement AC 45 Hz to 1000 Hz Range 400 mA Resolution 0.1 mA Accuracy ±(% of Rdg+Counts) ±(1.5% + 2)¹ Burden voltage (Typical) 2 mV/mA Range 60 mA Resolution 0.01 mA Accuracy ±(% of Rdg+Counts) ±(1.5% + 2)¹ Burden voltage (Typical) 2 mV/mA DC Range 400 mA Resolution 0.1 mA Accuracy ±(% of Rdg+Counts) ±(0.2% + 2) Burden voltage (Typical) 2 mV/mA Range 60 mA Resolution 0.01 mA Accuracy ±(% of Rdg+Counts) ±(0.2% + 2) Burden voltage (Typical) 2 mV/mA Overload 600 mA for 2 minutes maximum Fuse protection for mA input 0.44 mA, 1000 V, IR 10 kA AC conversion Inputs are ac-coupled and calibrated to the rms value of sine wave input Conversions are true-rms responding and specified from 5% to 100% of range. Input signal crest factor can be up to 3 up to 300 mA, decreasing linearly to crest factor ≤1.5 at 600 mA. For non-sinusoidal waveforms add +(2% reading + 2% FS) typical, for a crest factor up to 3. ¹ 1 kHz bandwidth Ohms Measurement Range Resolution Accuracy +(% of Rdg+Counts)¹ 600.0 Ω 0.1 Ω ±(0.9% + 2) 6.000 kΩ 0.001 kΩ ±(0.9% + 2) 60.00 kΩ 0.01 kΩ ±(0.9% + 2) 600.0 kΩ 0.1 KΩ ±(0.9% + 2) 6.000 MΩ 0.001 MΩ ±(0.9% + 2) 50.0 MΩ ² 0.01 MΩ ±(1.5% + 3) Overload protection 1000 V rms or dc Open circuit test voltage 1 m sec Frequency Measurement Range Resolution Accuracy ±(% of Rdg+Counts) 99.99 Hz 0.01 Hz ±(0.1% + 1) 999.9 Hz 0.1 Hz ±(0.1% + 1) 9.999 kHz 0.001 kHz ±(0.1% + 1) 99.99 kHz 0.01 kHz ±(0.1% + 1) Frequency Counter Sensitivity 600.0 mV ac V ac Sensitivity (RMS Sine Wave)¹ 5 Hz to 20 kHz 100.0 mV V ac Sensitivity (RMS Sine Wave)¹ 20 kHz to 100 kHz 150.0 mV DC Trigger Levels¹ to 20 kHz² NA 6.0 V V ac Sensitivity (RMS Sine Wave)¹ 5 Hz to 20 kHz 1.0 V V ac Sensitivity (RMS Sine Wave)¹ 20 kHz to 100 kHz 1.5 V DC Trigger Levels¹ to 20 kHz² -400.0 mV and 2.5 V 60.0 V V ac Sensitivity (RMS Sine Wave)¹ 5 Hz to 20 kHz 10.0 V V ac Sensitivity (RMS Sine Wave)¹ 20 kHz to 100 kHz 36.0 V DC Trigger Levels¹ to 20 kHz² 1.2 V and 4.0 V 600.0 V V ac Sensitivity (RMS Sine Wave)¹ 5 Hz to 20 kHz 100.0 V V ac Sensitivity (RMS Sine Wave)¹ 20 kHz to 100 kHz - DC Trigger Levels¹ to 20 kHz² 12.0 V and 40.0 V 1000.0 V V ac Sensitivity (RMS Sine Wave)¹ 5 Hz to 20 kHz 300.0 V V ac Sensitivity (RMS Sine Wave)¹ 20 kHz to 100 kHz - DC Trigger Levels¹ to 20 kHz² 12.0 V and 40.0 V ¹ Maximum input for specified accuracy = 10x range (1000 V max). Noise at low frequencies and amplitudes may affect accuracy ² Usable to 100 kHz with full scale input Capacitance Range Resolution Accuracy ±(% of Rdg+Counts) 1000 nF 1 nF ±(1.2% + 2) 10.00 μF 0.01 μF ±(1.2% + 2) 100.0 μF 0.1 μF ±(1.2% ±90 counts) 9999 μF 1 μF ±(1.2% ±90 counts) Temperature Measurement Range Resolution Accuracy ±(% of Rdg+Counts)¹ -40 ° C to 537 ° C 0.1 °C ±(1% + 10 counts) -40 ° F to 998 ° F 0.1 °F ±(1% + 18 counts) ¹ Accuracies apply following 90 minutes settling time after a change in the ambient temperature of the instrument Insulation Specifications Measurement range 0.01 MΩ to 2 GΩ Test voltages 50, 100, 250, 500, 1000 V Test voltage accuracy +20%, -0% Short-circuit test current 1 mA nominal Auto discharge Discharge time 30 V prior to initialization of test Maximum capacitive load Operable with up to 1 μF load Output Voltage 50 V (0% to +20%) Display range 0.01 to 6.00 MΩ Resolution 0.01 MΩ Test current 1 mA @ 50 kΩ Resistance accuracy ±(% of Rdg + Counts) ±(3% + 5 counts) Display range 6.0 to 50.0 MΩ Resolution 0.1 MΩ Test current 1 mA @ 50 kΩ Resistance accuracy ±(% of Rdg + Counts) ±(3% + 5 counts) 100 V (0% to +20%) Display range 0.01 to 6.00 MΩ Resolution 0.01 MΩ Test current 1 mA @ 100 kΩ Resistance accuracy ±(% of Rdg + Counts) ±(3% + 5 counts) Display range 6.0 to 60.0 MΩ Resolution 0.1 MΩ Test current 1 mA @ 100 kΩ Resistance accuracy ±(% of Rdg + Counts) ±(3% + 5 counts) Display range 60 to 100 MΩ Resolution 1 MΩ Test current 1 mA @ 100 kΩ Resistance accuracy ±(% of Rdg + Counts) ±(3% + 5 counts) 250 V (0% to +20%) Display range 0.1 to 60.0 MΩ Resolution 0.1 MΩ Test current 1 mA @ 250 kΩ Resistance accuracy ±(% of Rdg + Counts) ±(1.5% + 5 counts) Display range 60 to 250 MΩ Resolution 1 MΩ Test current 1 mA @ 250 kΩ Resistance accuracy ±(% of Rdg + Counts) ±(1.5% + 5 counts) 500 V (0% to +20%) Display range 0.1 to 60.0 MΩ Resolution 0.1 MΩ Test current 1 mA @ 500 kΩ Resistance accuracy ±(% of Rdg + Counts) ±(1.5% + 5 counts) Display range 60 to 500 MΩ Resolution 1 MΩ Test current 1 mA @ 500 kΩ Resistance accuracy ±(% of Rdg + Counts) ±(1.5% + 5 counts) 1000 V (0% to +20%) Display range 0.1 to 60.0 MΩ Resolution 0.1 MΩ Test current 1 mA @ 1 MΩ Resistance accuracy ±(% of Rdg + Counts) ±(1.5% + 5 counts) Display range 60 to 600 MΩ Resolution 1 MΩ Test current 1 mA @ 1 MΩ Resistance accuracy ±(% of Rdg + Counts) ±(1.5% + 5 counts) Display range 0.6 to 2.0 GΩ Resolution 100 MΩ Test current 1 mA @ 1 MΩ Resistance accuracy ±(% of Rdg + Counts) ±(10% + 3 counts) General Specifications Maximum voltage applied to any terminal and common 1000 V Storage temperature -40 °C to 60 °C (-40 °F to 140 °F) Operating temperature -20 °C to 55 °C (-4 °F to 131 °F) Temperature coefficient 0.05 x (specified accuracy) per °C for temperatures 28 °C (82 °F) Relative humidity Noncondensing 0% to 95% @ 10 °C to 30 °C (50 °F to 86 °F) 0% to 75% @ 30 °C to 40 °C (86 °F to 104 °F) 0% to 40% @ 40 °C to 55 °C (104 °F to 131 °F) Vibration Random, 2 g, 5-500 Hz per MIL-PRF-28800F, Class 2 instrument Radio frequency communication 2.4 GHz ISM Band Radio frequency certification FCC: T68-FBLE, IC: 6627A-FBLE Electromagnetic Compatibility International IEC 61326-1:Portable Electromagnetic Environment; IEC 61326-2-2 CISPR 11: Group 1, Class A Group 1: Equipment has intentionally generated and/or uses conductively-coupled radio frequency energy that is necessary for the internal function of the equipment itself. Class A: Equipment is suitable for use in all establishments other than domestic and those directly connected to a low-voltage power supply network that supplies buildings used for domestic purposes. There may be potential difficulties in ensuring electromagnetic compatibility in other environments due to conducted and radiated disturbances. Emissions that exceed the levels required by CISPR 11 can occur when the equipment is connected to a test object. The equipment may not meet the immunity requirements of this standard when test leads and/or test probes are connected. Korea (KCC) Class A Equipment (Industrial Broadcasting & Communication Equipment) Class A: Equipment meets requirements for industrial electromagnetic wave equipment and the seller or user should take notice of it. This equipment is intended for use in business environments and not to be used in homes. USA (FCC) 47 CFR 15 subpart B. This product is considered an exempt device per clause 15.103. Enclosure protection IEC 60529: IP40 (non-operating) Safety IEC 61010-1 Pollution Degree 2 IEC 61010-2-033 CAT IV 600 V / CAT III 1000 V Batteries Four AA batteries (IEC LR6) Battery life Meter use 1000 hours; Insulation test use: Meter can perform at least 1000 insulation tests with fresh alkaline batteries at room temperature. These are standard tests of 1000 V into 1 MΩ with a duty cycle of 5 seconds on and 25 seconds off. Size (H x W x L) 5.0 x 10.0 x 20.3 cm (1.97 x 3.94 x 8.00 in) Weight 550 g (1.2 lb) Altitude Operating 2000 m Storage 12,000 m Over-range capability 110% of range except for capacitance which is 100% Frequency overload protection <107 V Hz Fuse protection for mA input 0.44A, 1000 V, IR 10 kA Document Brochure Quick Reference User's Manual

Description The IDEAL 61-357 Digital Multi Meter is a CAT IV 600 CAT III 1000V rated auto ranging true root mean square (TRMS) digital multi meter that measures up to 10 Amps AC and DC current via the test leads in series with the load. It measures up to 1000V AC and DC, LoZ (low impedance) AC V, frequency, resistance, continuity, capacitance, and diodes via test-leads (included) and measures temperature (⁰F/⁰C) via a K-Type thermocouple (included). It's capable of detecting the presence of voltage between 40V to 600V via a non-contact sensor in the top center of the meter. It's display features a digital readout and also an analog bargraph representation and can be backlit. The unit uses an illuminated red LED in the center of the meter and emits audible tones to notify when voltage is above 30 volts, when continuity is detected and when the NCV senses voltage within its set range. The rubber boot has two probe storage points has built-in probe tip holders to allow measurements while holding the meter in one hand and the second lead in the other hand. The meter has a hanging strap mount (compatible with all other IDEAL meters with this feature) that allows for a hanging strap (sold separately) to be attached to the meter so it can be hung from a nail, screw or magnetic surface. An industrial grade over molding enhances grip and drop protection. This meter features HOLD, MIN/MAX, Relative, Range, and selectable Auto Power Off functions. The meter comes with 3 1.5V AAA Batteries and an easy open, fully accessible storage pouch with a belt loop that allows for meter, probes and thermocouple storage. Features UL Certified CAT IV 600V CAT III 1000V AC/DC 10A AC/DC TRMS Auto Ranging Digital Multimeter with Analog Bargraph on Display Provides True RMS AC voltage and current for accurate measurements on non-linear signals Measures AC/DC Current, AC/DC Voltage, Lo Z, frequency, resistance, continuity, capacitance, diodes, temperature and senses AC voltage. Built-in probe tip holder and hanging strap clip allows safer, easier measurement Large easy to read l backlit display, allows for safer/faster work in poorly lit environments Industrial design of removeable rubber boot enhances gripping and allows the meter to withstand a 6.6-foot (2 m) drop Includes soft case, test leads, batteries, and K-Type Thermocouple Combined LCD Digital readout and analog bar graph display. Technical Information CAT Rating (Safety): CAT IV 600V - CAT III 1000V Listing: cULus, CE, RCM Drop Protection: 6.6 ft (2m) Ingress Protection: IP52 AC Voltage: 1000V DC Voltage: 1000V AC Current: 10A DC Current: 10A Ohms: 60MΩ AC Millivolts: 6000 DC Millivolts: 6000 AC Milliamps: 6000 DC Milliamps: 6000 AC Microamps: 6000 DC Microamps: 6000 True RMS: Yes High Voltage Alarm: ACV/DCV | >30V Audible Continuity: Yes Visual Continuity: Yes Backlight: Yes Temperature: -40°F to 1832°F (-40°C to 1000°C) Low Impedance (LoZ): Yes NCV: Yes Auto Ranging: Yes Range Hold: Yes Data Hold: Yes Dioe Test: Yes Capacitance Test: 6000 μF Frequency / Duty Cycle: 10 Hz - 9.99KHz Max / Min: Yes Magnetic Strap Mount: Yes Strap not included) Test Probe Holder: Yes Auto-Power Off (APO): Yes APO Disable: Yes Low Battery Indication: Yes Battery Type: 3x 1.5V AAA (Included) LCD Display Count: 6000 Lead Warning: Yes Fuse Notification: Yes Bar Graph: Yes Warranty: 2-Year Included Accessories: Leads, Case, Temp. Sensor and Thermocouple (TC-757) Document Spec Sheet Catalogue Instruction Warranty Test Lead Selection Chart

Description The 87V MAX contains all the trusted features of the most popular digital multimeter used today, the Fluke 87V, and then some. From wet, dusty or dark environments to long days, the 87V MAX was designed to help you finish the most on a work site. It features a unique function for accurate voltage and frequency measurements on variable frequency motor drives (VFDs) and other electrically noisy equipment; using true-rms ac voltage and current for accurate measurements on non-linear signals. The 87V MAX is built with an IP67 rated, industrial-strength case and a removable holster. The holster doubles as a test probe holder for easier, one-handed operation. This meter is fully waterproof and dust proof keep working reliably no matter where your job takes you. Industrial-strength is no joke, the meter is designed to survive drops up to 4-meters (13 feet). Rely on accurate measurements with the extended operating temperature range of -40 °C (for up to 20 minutes) to +55 °C. The large display digits and 2-level bright, white backlight and backlit keypad buttons make for increased visibility. Along with the high resolution 19,999 count display mode allows you to read measurements easily in any work environment. This multimeter will run for up to 800 hours of battery life and offers measurement capabilities up to 1000 V ac and dc and up to 10 A (20 A for 30 seconds), frequency to 200 kHz min/max/average recording, plus 250 μs Peak min-max to capture variations automatically or use the built-in thermometer. Features Withstands drops up to 4-meters (13 feet) with industrial strength casing and holster Waterproof, dustproof IP67 case for the most extreme work sites Premium TL175 TwistGuard™ test leads Double the battery life of the 87V (up to 800 hours); backlit keys for dark environments Technical Information Electrical Specifications DC Voltage Range 0.1 mV to 1000 V Accuracy ±(0.05% + 1) Maximum resolution 0.1 mV AC Voltage Range 0.1 mV to 1000 V Accuracy ±(0.7% + 4) true-rms AC bandwidth 20 kHz with low pass filter; 3 dB @ 1 kHz Maximum resolution 0.1 mV DC Current Range 0.1 μA to 10 A (20 A for 30 seconds maximum) Amps accuracy ±(0.2% + 2) Maximum resolution 0.1 µA AC Current Range 0.1 μA to 10 A (20 A for 30 seconds maximum) Amps accuracy ±(1.0% + 2) true-rms Maximum resolution 0.1 µA Resistance Range 0.1 Ω to 50 MΩ Accuracy ±(0.2% + 1) Maximum resolution 0.1 Ω Capacitance Range 0.01 nF to 9999 μF Accuracy ±(1% + 2) Maximum resolution 0.01 nF Frequency Range 0.5 Hz to 199.99 kHz Accuracy ±(0.005% + 1) Maximum resolution 0.01 Hz Duty cycle Maximum duty cycle 99.9% Accuracy ±(0.2% per kHz + 0.1%) Maximum resolution 0.1% Temperature measurement range –200.0 °C to 1090 °C –328.0 °F to 1994.0 °F excluding probe 80 BK temperature probe –40.0 °C to 260 °C, ± 2.2 °C or 2% whichever is greater –40.0 °F to 500 °F, ± 4.0 °F or 2% whichever is greater Conductance Maximum conductance 60.00 nS Accuracy ±(1.0% + 10) Maximum resolution 0.01 nS Diode test Range 2 V Resolution 0.001V Accuracy ±(1% + 1) Diagnostics and data storage Peak Min/Max 250 μS Min/Max/Avg Yes Reading hold/Auto (Touch) Hold Yes Relative reference Yes Display Digital 6000 counts updates 4/second 19,999 counts in high–resolution mode Analog bar graph 32 segments, updates 40/second Backlight Two level Low pass filter (VFD measurements) Yes Input Alert™ Yes Safety Specifications Safety rating IEC61010-1: Pollution Degree 2 IEC 61010-2-033: CAT IV 600 V, CAT III 1000 V Agency approvals CE, CSA Mechanical and General Specifications IP rating IEC 60529: IP67 Power Three AA batteries. 800 hours typical, without backlight Size 6.0 x 10.1 x 21.5 cm (with holster) Weight 698.5 g (with holster) Warranty Limited lifetime Environmental Specifications Operating temperature -15 °C to 55 °C, to -40 °C for 20 minutes when taken from 20 °C Storage temperature -40 °C to + 60 °C Humidity (without condensation) 0% – 90% (0 °C – 35 °C) 0% – 70% (35 °C – 55 °C) Operating altitude 2000 m Document User's Manual Quick Reference

Description The Fluke 289 is the next generation high performance industrial logging multimeter. This Fluke Connect-compatible DMM is designed to solve complex problems in electronics, plant automation, power distribution, and electro-mechanical equipment. Let the 289 be your watchdog for systems or processes while you are off doing other jobs. It provides the ability to log data and graphically review up 10,000 recorded events and logged readings with on-board TrendCapture. Zoom on trend provides a 14x zoom to view and analyze data—without needing a PC. Because the 289 is Fluke Connect-compatible you can set it up with the ir3000 FC wireless connector (sold separately) to communicate with your iOS and Android smart devices through the Fluke Connect mobile app and monitor readings from a remote location. Or you can share readings with your team in an instant anytime, from anywhere with ShareLive™ video call. It can help you solve problems faster and minimize downtime. Features Share results with your team using ShareLive™ video call (requires ir3000 FC wireless connector [sold separately] and no-cost Fluke Connect mobile app). TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred. Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times. Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy. Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment. LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when testing for absence or presence of live power. Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event. Large 50,000 count, 1/4 VGA dot matrix display with white backlight. Measure up to 10 A (20 A for 30 seconds). 100 mF capacitance range. Provides up to a 14x zoom to view and analyze TrendCapture data in depth Includes a selectable AC filter (smoothing mode) to help display a steadier reading when the input signal is changing rapidly or noisy. Offers adjustable recording and auto hold thresholds to specify a percentage change in the readings that begins a new event Features a large 50,000 count, 1/4 VGA dot matrix display with white backlight Stores up to 15,000 recorded events so you can save multiple logging sessions before PC download is necessary Provides two-terminal 50 ohm range with 1 milliohm resolution, 10 mA source current, for measuring and comparing differences in motor winding resistance or contact resistance Includes low pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment. Provides LoZ Volts, a low impedance voltage function for eliminating ghost voltages Recommended when testing for absence or presence of live power Features on-board help screens for measurement functions Includes a real-time clock to automatically time stamp saved readings Offers relative mode to remove test lead resistance from low ohms or capacitance measurements Provides True-RMS AC voltage and current for accurate measurements on non-linear signals Measures up to 10 A (20 A for 30 seconds) Provides up to 100 mF capacitance range Records transients as fast as 250 μs with peak capture Includes premium test leads, alligator clips, and amp jack plugs Offers optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks Works with optional FlukeView forms to enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents. Includes a limited lifetime warranty. Technical Information Specifications Function DC volts Range / resolution 50.000 mV, 500.00 mV, 5.0000 V, 50.000 V, 500.00 V, 1000.0 V Basic accuracy 0.025% AC volts Range / resolution 50.000 mV, 500.00 mV, 5.0000 V, 50.000 V, 500.00 V, 1000.0 V Basic accuracy 0.4% (True-RMS) DC current Range / resolution 500.00 μA, 5000.0 μA, 50.000 mA, 400.00 mA, 5.0000 A, 10.000 A Basic accuracy 0.05% AC current Range / resolution 500.00 μA, 5000.0 μA, 50.000 mA, 400.00 mA, 5.0000 A, 10.000 A Basic accuracy 0.6% (True-RMS) Temperature (excluding probe) Range / resolution -200.0°C to 1350.0°C (-328.0°F to 2462.0°F) Basic accuracy 1.0% Resistance Range / resolution 50.000 Ω, 500.00 Ω, 5.0000 kΩ, 50.000 kΩ, 500.00 kΩ, 5.0000 MΩ, 50.00 MΩ, 500.0 MΩ Basic accuracy 0.05% Capacitance Range / resolution 1.000 nF,10.00 nF 100.0 nF, 1.000 μF, 10.00 μF, 100.0 μF, 1000 μF, 10.00 mF, 100 mF Basic accuracy 1.0% Frequency Range / resolution 99.999 Hz, 999.99 Hz, 9.9999 kHz, 99.999 kHz, 999.99 kHz Basic accuracy 0.005% Connectivity Optional infrared connector via Fluke ir3000 FC General Specifications Maximum voltage between any terminal and earth ground 1000 V Battery type 6 AA alkaline batteries, IECLR6 Battery life 100 hours minimum, 200 hours in logging mode Temperature Operating -20°C to 55°C Storage -40°C to 60°C Relative humidity 0 to 90% (0 to 37°C), 0 to 65% (37°C to 45°C), 0 to 45% (45°C to 55°C) Electromagnetic compatibility EMC EN61326–1 Vibration Random vibration per MIL-PRF-28800F Class 2 Shock 1 meter drop per IEC/EN 61010–1 3rd Edition Size (H x W x L) 22.2 x 10.2 x 6 cm (8.75 x 4.03 x 2.38 in) Weight 870.9 g (28 oz) Multiple on screen displays Yes True-RMS AC bandwidth 100 kHz dBV/dBm Yes DC mV resolution 1 μV Megohm range Up to 500 MΩ Conductance 50.00 nS Continuity beeper Yes Battery/fuse access Yes/Yes Elapse time clock Yes Time of day clock Yes Min-max-avg Yes Duty cycle Yes Pulse width Yes Isolated optical interface Yes Auto/touch hold Yes Reading memory Yes Log to PC Yes Interval/event logging Yes Logging memory Up to 15,000 readings Wireless connectivity (optional) Yes Document User's Manual Quick Reference

Description Ideal for electricians, this combo kit is built around the Fluke 87V, the most widely used industrial digital multimeter in the world and includes essential accessories to make you even more productive. This kit offers 15% savings compared with the individual price of all the accessories. Plus you'll be working with the most trusted tools in the world. The Fluke 87V/E2 Industrial Electrician Combo Kit is designed and assembled in the USA. The 87V multimeter is backed by a limited lifetime warranty, so you can rely on your DMM every time you take it out of your tool box. Working on VSDs/VFDs: Take accurate voltage, current and frequency measurements on the output side of the drive at either the drive itself or at the motor terminals. Industrial troubleshooting: Get the resolution and accuracy you need to solve more problems on motor drives, in-plant automation, power distribution, and electromechanical equipment. Checking power quality: Capture glitches and spikes as short as 250 μs. Identify irregular signals. Features Fully insulated 3 mm exposed metal test probes for electricians working in high energy environments C35 Soft Carrying Case holds meter, test leads and other accessories TPAK magnetic hanging strap lets you attach the meter to any ferrous surface, such as cabinets and iron pipes. Advanced measurement functions True-rms ac measurements 0.05% dc accuracy 6,000 counts, 3-3/4 digit resolution, or 20,000 counts, 4-1/2 digit—resolution 10 A ac or dc (with test leads and current jacks) with 0.1 μA resolution Temperature measurements up to 1090 °C with included thermocouple probe Provides 10,000 µF capacitance range for components and motor caps Provides peak capture and Min/Max/Avg recording to capture intermittent as short as 250 µS Easy access door for fast battery changes without breaking the calibration seal Fits into an optional magnetic hanger for easy set-up and viewing while freeing your hands for other tasks Presents a large digit display with bright, two-level backlight for easier reading in low light Includes an analog bar graph for fast changing or unstable signals Auto and manual ranging for maximum flexibility Relative mode to calculate and display difference between two readings Holds readings on display for safe viewing after removing probes using Touch Hold technology Technical Information Specifications Voltage DC Maximum Voltage 1000 V Accuracy ±(0.05% + 1) Maximum Resolution 10 µV Voltage AC Maximum Voltage 1000 V Accuracy ±(0.7% + 2) True RMS AC Bandwidth 20 kHz with low pass filter; 3 db @ 1 kHz Maximum Resolution 0.1 mV Current DC Maximum Amps 10 A (20 A for 30 seconds maximum) Amps Accuracy ±(0.2% + 2) Maximum Resolution 0.01 µA Current AC Maximum Amps 10 A (20 A for 30 seconds maximum) Amps Accuracy ±(1.0% + 2) True RMS Maximum Resolution 0.1 µA Resistance Maximum Resistance 50 MΩ Accuracy ±(0.2% + 1) Maximum Resolution 0.1Ω Capacitance Maximum Capacitance 9,999 µF Accuracy ±(1% + 2) Maximum Resolution 0.01 nF Frequency Maximum Frequency 200 kHz Accuracy ±(0.005% + 1) Maximum Resolution 0.01 Hz Duty Cycle Maximum Duty Cycle 99.9% Accuracy ±(0.2% per khz +0.1%) Maximum Resolution 0.1% Temperature Measurement -200.0°C - 1090°C -328.0°F - 1994.0°F excluding probe 80 BK Temperature Probe -40.0°C - 260°C -40.0°F - 500°F, 2.2°C or 2% whichever is greater Conductance Maximum Conductance 60.00 nS Accuracy ±(1.0% + 10) Maximum Resolution 0.01 nS Diode Range 3 V Resolution 1 mV Accuracy ±(2% + 1) Duty Cycle Range Accuracy Within ±(02% per kHz +0.1%) Environmental Specifications Operating Temperature -20°C to +55°C Storage Temperature -40°C to +60°C Humidity (Without Condensation) 0% - 90% (0°C - 35°C) 0% - 70% (35°C - 55°C) Operating Altitude 2000 m Safety Specifications Overvoltage category EN 61010-1 to 1000 V CAT III, 600V CAT IV Agency Approvals UL, CSA, TÜV, VDE listed Mechanical and General Specifications Size 201 x 98 x 52 mm (with holster) Weight 355 g 624 g - with holster Display Digital 6000 counts updates 4/sec. 19,999 counts in high-resolution mode Analog 32 segments, updates 40/sec. Frequency 19,999 counts, updates 3/sec at > 10 Hz Warranty Lifetime Battery Life Alkaline ~400 hours typical, without backlight Shock 1 Meter drop per IEC 61010-1:2001 Vibration Per MIL-PRF-28800 for a Class 2 instrument Document Datasheet

Description The Fluke 175 True RMS Digital Multimeter delivers the baseline general purpose features required by professional technicians around the world. You can find problems fast with all the basic troubleshooting measurements such as frequency, capacitance, resistance, continuity, and diode. And Display Hold and Auto Hold will help you capture significant events. All inputs on the 175 are protected to IEN61010-1 CAT IV 600 V/CAT III 1000 V. UL, CSA, TÜV listed and VDE Pending. You can rely on the Fluke 175 for accurate, true-RMS readings through years of reliable service. Features Provides the baseline multimeter features you need for troubleshooting and repairing electrical and electronic systems Delivers accurate true-RMS AC current and voltage plus frequency, capacitance, resistance, continuity and diode measurements Increases productivity with manual and automatic ranging, Display Hold, Auto Hold, and Min/Max-average recording Safety rated CAT III 1000 V, CAT IV 600 V Comes with a lifetime warranty Allows closed-case calibration through front panel Includes ergonomic case with integrated protective holster Technical Information Specifications Voltage DC Accuracy 1 ±(0.15% + 2) Max. resolution 0.1 mV Maximum 1000 V Voltage AC Accuracy 1 ±(1.0% + 3) Max. resolution 0.1 mV Maximum 1000 V Current DC Accuracy 1 ±(1.0% + 3) Max. resolution 0.01 mA Maximum 10 A Current AC Accuracy 1 ±(1.5% + 3) Max. resolution 0.01 mA Maximum 10 A Resistance Accuracy 1 ±(0.9% + 1) Max. resolution 0.1 Ω Maximum 50 MΩ Capacitance Accuracy 1 ±(1.2% + 2) Max. resolution 1 nF Maximum 10,000 µF Frequency Accuracy 1 ±(0.1% + 1) Max. resolution 0.01 Hz Maximum 100 kHz 1. Accuracies are best accuracies for each function Environmental Specifications Operating temperature -10°C to +50°C Storage temperature -30°C to +60°C Humidity (without condensation) 0% – 90% (0°C – 35°C) 0% – 70% (35°C – 50°C) Safety Specifications Overvoltage category EN 61010–1 to 1000 V CAT III EN 61010–1 to 600 V CAT IV Agency approvals UL, CSA, TÜV listed and VDE Pending Mechanical and General Specifications Size 43 x 90 x 185 mm Weight 420 g Warranty Lifetime Battery life Alkaline ~200 hours typical, without backlight Document User's Manual

Description The Fluke 115 field technician’s digital multimeter measures True-rms voltage and current with plus resistance, continuity, frequency, and capacitance to meet the needs of a wide variety of field service technicians. The 115 digital multimeter offers the users one-handed operation and a backlit display. The large, easy-to-read digits offer a 6000-count resolution. The 115 provides Min/Max/Average with elapsed time to record signal fluctuations. It also measures: AC and DC voltage to 600V, AC and DC current to 10 A (20 A overload for 30-seconds max). Features Compact True-rms digital multimeter for field service Includes: meter, holster, 4 mm PVC-Insulated test lead Easy one-handed operation of the meter Min/Max/Average to record signal fluctuations Technical Information Specifications Accuracy Specifications DC millivolts Range/resolution 600.0 mV / 0.1 mV Accuracy ± ([% of reading] + [counts]): 0.5% + 2 DC volts Range/resolution 6.000 V / 0.001 V 60.00 V / 0.01 V 600.00 V / 0.1 V Accuracy ± ([% of reading] + [counts]): 0.5% + 2 AC millivolts 1 True RMS Range/resolution 600.0 mV / 0.1 mV Accuracy 1.0% + 3 (DC, 45 Hz to 500 Hz) 2.0% + 3 (500 Hz to 1 kHz) AC volts 1 True RMS Range/resolution 6.000 V / 0.001 V 60.00 V / 0.01 V 600.0 V / 0.1 V Accuracy 1.0% + 3 (DC, 45 Hz to 500 Hz) 2.0% + 3 (500 Hz to 1 kHz) Continuity Range/resolution 600 Ω / 1 Ω Accuracy Beeper on 250 Ω detects opens or shorts of 500 μs or longer. Ohms Range/resolution 600.0 Ω / 0.1 Ω 6.000 kΩ / 0.001 kΩ 60.00 kΩ / 0.01 kΩ 600.0 kΩ / 0.1 kΩ 6.000 MΩ / 0.001 MΩ Accuracy 0.9% + 1 Range/resolution 40.00 MΩ / 0.01 MΩ Accuracy 5% + 2 Diode test Range/resolution 2.00 V / 0.001 V Accuracy 0.9% + 2 Capacitance Range/resolution 1000 nF / 1 nF 10.00 μF / 0.01 μF 100.0 μF / 0.1 μF 9999 μF / 1 μF 100 μF to 1000 μF Accuracy 1.9% + 2 Range/resolution > 1000 μF Accuracy 5% + 20% Lo-Z capacitance Range 1 nF to 500 μF Accuracy 10% + 2 typical AC amps True RMS (45 Hz to 500Hz) Range/resolution 6.000 A / 0.001 A 10.00 A / 0.01 A Accuracy 1.5% + 3 20 A overload for 30-seconds max DC amps Range/resolution 6.000 A / 0.001 A 10.00 A / 0.01 A Accuracy 1.0% + 3 20 A overload for 30-seconds max Hz (V or A input) 2 Range/resolution 99.99 Hz / 0.01 Hz 999.9 Hz / 0.01 Hz 9.999 kHz / 0.001 kHz 50.00 kHz / 0.01 kHz Accuracy 0.1% + 2 1. All AC voltage ranges except Auto-V/LoZ are specified from 1% to 100% of range. Auto-V/LoZ is specified from 0.0 V. 2. Frequency is AC coupled, 5Hz to 30 kHz for AC voltage. 2. Temperature uncertainty (accuracy) does not include the error of the thermocouple probe. 2. Frequency is AC coupled, 5 Hz to 50 kHz for AC voltage. Frequency is DC coupled, 45 Hz to 5 kHz for AC current. 2. Temperature Range/Resolution: -40℉ to 752℉ / 0.2℉. General Specifications Maximum voltage between any terminal and earth ground 600 V Safety IEC 61010-1: Pollution Degree 2 IEC 61010-2-033: CAT III 600V Display Digital: 6,000 counts, updates 4 per second Bar graph 33 segments, updates 32 per second Operating temperature -10℃ to + 50℃ Storage temperature -40℃ to + 60℃ Battery type 9 volt Alkaline, IEC 6LR61 Battery life 400 hours typical, without backlight Size 167 x 84 x 46 mm (6.57 x 3.31 x 1.82 in) Weight 550 g Warranty 3 years Document User's Manual

Description With its precision, reliability, and ease of use, the Fluke 177 Digital Multimeter is the preferred solution for professional technicians worldwide. Independently tested for safe use in CAT IV 600 V/CAT III 1000 V environments, the Fluke 177 Includes all the features you need to troubleshoot and repair many problems in electrical and electronic systems. With the Fluke 177 Digital Multimeter you get True-RMS voltage and current measurements, 6000-count resolution, manual and automatic ranging, and frequency, capacitance, resistance, continuity, and diode measurements. In addition, the Fluke 177 provides 0.09% basic accuracy, a digital display with analog bar graph and backlight. Plus a limited lifetime warranty. Features True-RMS digital multimeter with the features professional technicians prefer Increases productivity with manual and automatic ranging, Display Hold, Auto Hold, and Min/Max-average recording Measures AC and DC voltage to 1000 V Delivers accurate True-RMS AC current and voltage plus frequency, capacitance, resistance, continuity and diode measurements Safety rated CAT III 1000 V, CAT IV 600 V Features digital display with backlight for working in dim lighting Allows closed case calibration through front panel Features an ergonomic case with integrated protective holster Comes with a limited lifetime warranty Technical Information Specifications Voltage DC Accuracy 1 ±(0.09% + 2) Max. resolution 0.1 mV Maximum 1000 V Voltage AC Accuracy 1 ±(1.0% + 3) Max. resolution 0.1 mV Maximum 1000 V Current DC Accuracy 1 ±(1.0% + 3) Max. resolution 0.01 mA Maximum 10 A Current AC Accuracy 1 ±(1.5% + 3) Max. resolution 0.01 mA Maximum 10 A Resistance Accuracy 1 ±(0.9% + 1) Max. resolution 0.1 Ω Maximum 50 MΩ Capacitance Accuracy 1 ±(1.2% + 2) Max. resolution 1 nF Maximum 10,000 µF Frequency Accuracy 1 ±(0.1% + 1) Max. resolution 0.01 Hz Maximum 100 kHz 1. Accuracies are best accuracies for each function Environmental Specifications Operating temperature -10°C to +50°C Storage temperature -30°C to +60°C Humidity (without condensation) 0% – 90% (0°C – 35°C) 0% – 70% (35°C – 50°C) Safety Specifications Overvoltage category EN 61010–1 to 1000 V CAT III EN 61010–1 to 600 V CAT IV Agency approvals UL, CSA, TÜV listed and VDE Pending Mechanical and General Specifications Size 43 x 90 x 185 mm Weight 420 g Warranty Lifetime Battery life Alkaline ~200 hours typical, without backlight Document User's Manual

Description The Fluke 87V Industrial Multimeter provides the resolution and accuracy to efficiently troubleshoot motor drives, plant automation, power distribution, and electromechanical equipment - even in loud, high-energy, and high-altitude locations. The 87V is designed so you can work more efficiently. Easy-access door for fast battery changes without breaking the calibration seal Analog bar graph for fast changing or unstable signals Large digit display with bright, two-level backlight for easier reading in low light Touch Hold keeps readings on display even after removing probes The 87V lets you identify complex electrical problems fast. It supports accurate measurements on VFDs using a low-pass filter. The meter also captures intermittent as fast as 250 µS using Peak Capture. High-frequency, high-energy noise generated by large drive systems is blocked from your measurements with specially designed shielding. All the inputs in the 87V are updated to the third edition of the EN 61010-1 to CAT III 1000 V and CAT IV 600 V. The meter is designed to withstand spikes of more than 8000 V. You also benefit from an audible Input Alert warning if the test leads are placed in the incorrect input jacks for the measurement being made. The 87V has a removeable holster that also holds a test probe during testing for easier viewing. Relative mode lets you remove test lead resistance, improving accuracy of low-resistance measurements. To make your life even easier, the 87V fits into an optional magnetic hanger for easy set-up and viewing while freeing your hands for other tasks. Features Identify complex signal problems fast Supports accurate measurements on VFDs using a low-pass filter Captures intermittent as fast as 250 µS with Peak Capture Technical Information Specifications Voltage DC Maximum voltage 1000 V Accuracy ±(0.05% + 1) Maximum resolution 10 µV Voltage AC Maximum voltage 1000 V Accuracy ±(0.7% + 2) True RMS AC bandwidth 20 kHz with low pass filter; 3 dB @ 1 kHz Maximum resolution 0.1 mV Current DC Maximum amps 10 A (20 A for 30 seconds maximum) Amps accuracy ±(0.2% + 2) Maximum resolution 0.01 µA Current AC Maximum amps 10 A (20 A for 30 seconds maximum) Amps accuracy ±(1.0% + 2) True RMS Maximum resolution 0.1 µA Resistance Maximum resistance 50 MΩ Accuracy ±(0.2% + 1) Maximum resolution 0.1 Ω Capacitance Maximum capacitance 9,999 µF accuracy ±(1% + 2) Maximum resolution 0.01 nF Frequency Maximum frequency 200 kHz Accuracy ±(0.005% + 1) Maximum resolution 0.01 Hz Duty cycle Maximum duty cycle 99.9% Accuracy ±(0.2% per kHz + 0.1%) Maximum resolution 0.1% Temperature measurement –200.0 °C – 1090 °C –328.0 °F – 1994.0 °F excluding probe 80 BK temperature probe –40.0 °C – 260 °C –40.0 °F – 500 °F, 2.2 °C or 2% whichever is greater Conductance Maximum conductance 60.00 nS Accuracy ±(1.0% + 10) Maximum resolution 0.01 nS Diode Range 3 V Resolution 1 mV Accuracy ±(2% + 1) Duty cycle range Accuracy Within ±(0.2% per kHz + 0.1%) Environmental Specifications Operating temperature –20 °C to + 55 °C Storage temperature –40 °C to + 60 °C Humidity (without condensation) 0% – 90% (0 °C – 35 °C) 0% – 70% (35 °C – 55 °C) Operating Altitude 2000 m Safety Specifications Overvoltage category EN 61010–1 to 1000 V CAT III, 600V CAT IV Agency approvals CE, CSA, RCM Mechanical and General Specifications Size 201 x 98 x 52 mm (with holster) Weight 355 g 624 g – with holster Display Digital 6000 counts updates 4/sec. 19,999 counts in high–resolution mode Analog 32 segments, updates 40/sec Frequency 19,999 counts, updates 3/sec at > 10 Hz Warranty Lifetime Battery Life Alkaline ~400 hours typical, without backlight Shock 1 Meter drop per IEC 61010–1:2001 Vibration Per MIL–PRF–28800 for a Class 2 instrument Document User's Manual Quick Reference

Description Conduct all your measurements using the Greenlee DM-810A AC/DC Digital Multimeter. Whether you need to check the current, voltage, temperature, frequency, resistance or capacitance, this meter has you covered. It's built with a backlit LCD and comes with test leads. Benefits True RMS for no-compromise accuracy Measures voltage, current, resistance, capacitance and frequency Tests continuity and diodes Backlit LCD with dual 10,000 count displays BeepJack warns when test leads are incorrectly inserted in current measurement terminals Automatic and manual range selection Relative offset mode to see changes in measurements Data hold Use optional USB interface DMSC-9U for direct-To-PC logging Lifetime limited warranty Accessories included: (1)9V battery, bead temperature probe (DM-820A, DM-830A only, 400°F/204°C max), test leads, protective boot, carrying case Technical Information Brand: Greenlee Amperage Measurement: 600, 6000μA; 60, 600mA; 6, 10A Display: Backlit LCD With Dual 10,000 Count Capacitance: 60, 600nF; 6, 60, 600μF; 6, 25 mF Conductance: 99.99 nS Frequency Measurement: 15Hz- 50kHz Sine Wave, 5Hz - 1MHz Logic Level Square Wave Includes: (1) 9V Battery, Bead Temperature Probe (DM-820A, DM-830A Only, 400°F/204°C Max), Test Leads, Protective Boot, Carrying Case Measurement Category: CAT IV, 1000 V Resistance Measurement: 600Ω; 6, 60, 600 kΩ; 6, 60 MΩ Standard: CAT IV, C/UL US Listed, TRUE RMS, CE Listed Temperature Rating: K Type, -58 To 1832°F (-50 To 1000°C) Voltage Measurement: 60, 600 mV, 9.999, 99.99, 999.9 V Documents Instruction Manual

Description Designed for efficiency this product features a CATIII 1000V safety rating with ETL and CE approval. Measures voltage, current, resistance, temperature, frequency, duty cycle, and capacitance, as well as perform diode and audible continuity tests. Features manual and auto-ranging with a relative offset mode that allows you to view changes in measurements. Benefits Equipped for voltage, current, frequency, capacitance and temperature Auto and manual ranging design Large digital display with analog bar graph Fuses are field-replaceable Offers battery test and duty cycle Frequency, capacitance, duty cycle, temperature, battery test and analog bar graph are just some of the features available on these meters Technical Information Brand: Greenlee Display: Digital with Bar Graph AC Volts: 1000 DC Volts: 1000 Resistance: 60M Ohms Continuity/Diode Tests: Yes/Yes Frequency: Yes Duty Cycle: 5%~95% Capacitance: 400uF Temperature (Type K): Yes Counts: 6000 Hold: Yes Relative: Yes Backlight: Yes Automatic Power Off (APO): Yes Documents Datasheet

Description Need to check the voltage or resistance? You can rely on the Greenlee DM-25 Digital Multimeter to provide quick, accurate results. Additionally, it can test batteries, check diodes and run continuity tests to make sure all your needs are covered. Benefits Measures AC/DC voltage and resistance and can check diodes and continuity Capable of testing 1.5 V and 9 V batteries CATIII 600V to 1000V safety ratings Large LCD is easy to read Manual ranging Replaceable fuses for easy field repair Frequency, capacitance, duty cycle, temperature, battery test and analog bar graph are just some of the features available on these meters Technical Information Brand: Greenlee Display: Digital AC Volts: 600 DC Volts: 600 Resistance: 200, 2000 Ω; 20, 200, 2000 kΩ Standard: C/US ETL Listed, CATIII Approved Continuity/Diode Tests: Yes/Yes Battery Test (1.5V - 9V): Yes Diode Test: Yes Counts: 2000 Documents Brochure Instruction Manual

Description Equipped with a host of advanced features, this Greenlee DM-200A Digital Multimeter is able to accurately measure voltage, current, resistance and frequency. It features a backlit LCD, so it's easy to see the readings in low-light conditions, and it has Beep-Jack™ audible indicators. Benefits Accurately measures voltage, current, resistance and frequency Use to test continuity and diodes Readings are clearly displayed on the backlit LCD 2 voltage detection modes: non-contact or single test lead Beep-Jack™ audible warning indicators let you know if the test lead is incorrectly inserted High visibility 6000 count LCD display Auto power off, display backlight, analog bar graph Automatic/manual range selection Relative offset mode Data hold Use optional USB / RS-232 interface DMSC-2U for direct-to-PC logging Accessories included: (2)1.5V AAA batteries, bead temperature probe (DM-210A, DM-510A only, 400°F/204°C max), test leads, protective boot Technical Information Brand: Greenlee Voltage Measurement: 60mV to 1000V AC/DC Amperage Measurement: 600mA to 8A AC/DC Resistance: 600? to 60M? Frequency (Hz): 50 ~ 400 Measurement Category: Cat IV, 300V; Cat III 600V, Cat II 1000V Documents Brochure Instruction Manual