Fan Controls

Description Experience the ultimate convenience in lighting control with Lutron's family of Caseta Wireless dimmers, switches, and smartphone control. The Caseta Wireless In-Wall Switch provides switching of multiple load types and, when paired with Pico remote control, your light can be controlled from anywhere in the space. Use the Pico remote control either in your hand, on a tabletop pedestal or by mounting the remote directly to the wall (remote control and accessories sold separately). You can even use the Pico remote to control the lights from your car as you arrive home. Benefits Controls wall and Ceiling lights doesn't require a Neutral wire minimum load cap included (for switching LED, CFL, and ELV loads), Claro wall plate (pictured) sold separately. Use Pico remotes for additional switches in multi-location applications Tested to withstand surge voltages without damage or loss of operation controls always operate locally and DO not require system control For use with the Caseta wireless smart bridge Pro tested to withstand electrostatic discharge without damage or memory loss Lutron PD-5WS-DV-WH Light Switch, Caseta Wireless 5A Lighting and 3A Fan RF On/Off - White Technical Information Specifications: cULus Listed NOM Certified FCC Approved Complies with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules Industry Canada Certified IFTEL Certified NEMA 410 Power Operating voltage: 120/277 V~ 50/60 Hz Maximum Load at 120V: Incandescent / Halogen - 600W MLV - 600 VA/475 W General Purpose Fan - 3A LED - 5A Fluorescent - 5A ELV - 600W Environment Ambient operating temperature: 32 °F to 104 °F (0 °C to 40 °C), 0%to 90% humidity, noncondensing. Indoor use only Documents Limited Warranty Specification Sheet Installation guide 3-way with regular switch

Description The Maestro Fan Control and Light Dimmer for dimmable LEDs, Incandescent and Halogen bulbs come equipped with Lutron FASS technology which makes it safe and easy to replace your light bulb by cutting off power from the light and fan. Its clean finish gives it an attractive appearance in any room. Benefits Touch Rocker to Adjust light level/ fan speed Indicator lights display light level and fan speed Low-end adjustment to accommodate a wide range of bulbs Can control up to 75W dimmable CFL/LED or 250 Incandescent/Halogen lighting loads Lutron Smart Bridge Required, for smart home automation compatibility Capable of controlling up to 1.5A paddle-type ceiling fans Provides the best dimming performance for dimmable LED bulbs Programmable fade of the dimmer gradually turns lights on, allowing your eyes to adjust to the change in light, and gradually fade off, allowing time to exit a room before the lights turn off Dimmer works with up to 75W of dimmable LEDs or CFLs or up to 250W of incandescent or halogen. Fan control works with up to 1.5a Ceiling paddle Fan Fan control provides 4 quiet Fan speeds for increased comfort For use in single-pole applications Documents INSTALLATION: How To Install your Fan Control & Light Dimmer

Description The Swidget product line has been developed to support the easy integration of Home Automation and Smart Home markets with unique and flexible solutions. Adding a Swidget Insert turns the wired device into a powerful and flexible Smart Home device. The interchangeability of the Swidget Inserts ensure that the system can work with any existing or future Smart Home wireless system. The 20/40/60 Control Switch has the ability to allow interchangeable Swidget Inserts to be installed, removed or replaced - making Swidget the optimal for building renovations and new construction. The Swidget 20/40/60 Control Switch uses a simple 4-wire interface, making installation simple for any single pole or dry contact application. Features Built-in 20/40/60 minute automatic shut off timer Single pole and dry contact wiring, compatible for lighting and fan applications Complies with ASHRAE 62.2 when used with an ASHRAE 62.2 compliant fan/ERV/HRV Wide range of customization and feature options with plug and play Swidget Inserts Technical Information Input power rating: 125VAC, 5A Wiring type Pre-stripped wire leads (Line/Neutral): #16 AWG (Stranded), Ground screw Testing and code compliance: UL1310/UL60730-1 CSA 22.2 #223/E60730-1 (Canada and US) Flammability: UL94 5VA Environmental: Indoor installation only Operating temperature: -10 °C to 40 °C) (14 °F to 104 °F) Insert voltage output: Nominal 5VDC (+/- 5%) Insert DC protection: CLASS 2 - Current limiting and thermal shutdown protection Insert current output: Constant current maximum 2.0A LED/CFL load rating: 300W Incandescent/Halogen load rating: 600W Horsepower load rating: 0.3HP Switch configuration: Single pole, dry contact Document Brochure Data Sheet

Description Experience the ultimate convenience in lighting control with Lutron's family of Caseta Wireless dimmers, switches, and smartphone control. The Caseta Wireless In-Wall Switch provides switching of multiple load types and, when paired with Pico remote control, your light can be controlled from anywhere in the space. Use the Pico remote control either in your hand, on a tabletop pedestal or by mounting the remote directly to the wall (remote control and accessories sold separately). You can even use the Pico remote to control the lights from your car as you arrive home. Benefits The switch works with up to 720-Watt of incandescent, halogen, ELV, and MLV, 6 Amp of dimmable LED/CFL and 3.6 Amp of general-purpose fans Turns lights or ceiling/exhaust fans on or off Neutral wire is required Can be used with an existing toggle switch in a 3-way application. Works with voice assistant or FREE Lutron app Connects with more leading Smart home brands Easy Installation in as little as 15 minutes Documents INSTALLATION: How To Install your Switch

Description The Maestro Fan Control and Light Dimmer for dimmable LEDs, Incandescent and Halogen bulbs come equipped with Lutron FASS technology which makes it safe and easy to replace your light bulb by cutting off power from the light and fan. Its clean finish gives it an attractive appearance in any room. Benefits Touch Rocker to Adjust light level/ fan speed Indicator lights display light level and fan speed Low-end adjustment to accommodate a wide range of bulbs Can control up to 75W dimmable CFL/LED or 250 Incandescent/Halogen lighting loads Lutron Smart Bridge Required, for smart home automation compatibility Capable of controlling up to 1.5A paddle-type ceiling fans Provides the best dimming performance for dimmable LED bulbs Programmable fade of the dimmer gradually turns lights on, allowing your eyes to adjust to the change in light, and gradually fade off, allowing time to exit a room before the lights turn off Dimmer works with up to 75W of dimmable LEDs or CFLs or up to 250W of incandescent or halogen. Fan control works with up to 1.5a Ceiling paddle Fan Fan control provides 4 quiet Fan speeds for increased comfort For use in single-pole applications Documents INSTALLATION: How To Install your Fan Control & Light Dimmer

Description The Swidget product line has been developed to support the easy integration of Home Automation and Smart Home markets with unique and flexible solutions. Interchangeable Swidget Inserts can be installed, removed or replaced - making Swidget the optimal choice for building renovations and new construction. Adding a Swidget Insert turns the wired device into a powerful and flexible Smart Home device. The interchangeability of the Swidget Inserts ensure that the system can work with any existing or future Smart Home wireless system. Designed to be integrated into all major Smart Home protocols, the Swidget Wi-Fi Control transforms the Swidget Outlet or Switch into a Wi-Fi smart device. Using the free Swidget App (available for Android and iOS), unlock your Swidget device to perform any numberof tasks: Power On/Off your outlet Monitor your energy consumption Schedule devices to conserve energy Set multiple automatic notifications including when your power consumption is too high As all Swidget Inserts operate on the Class 2 certified interface, an electrician is not required for installation or removal. When connected to a 2.4GHz Wi-Fi network, the Temperature, Humidity & Motion Insert can be used to create sensor-based automations, where temperature, humidity and motion can trigger actions in switches, outlets, send notifications, and more. Sensor information can also be relayed to various control systems, including Alexa and Google Assistant*, for use in a variety of applications. Features Wi-Fi 2.4GHz Independent power monitoring on each circuit Works with Amazon Alexa, Google Assistant and IFTTT* Regular OTA upgrades to expand capabilities * 3rd party integrations are controlled and managed by external service providers. Swidget makes no warranty that these services will continue to exist or be supported over the full life of the product. Technical Information Document Brochure Data Sheet

Description The Leviton Humidity Sensor and Fan Control automatically detects excess humidity in a room and activates the ventilation fan to lessen condensation, which helps reduce mold and mildew. Additionally, the device helps reduce energy usage by automatically operating the fan only when needed. The sensor uses a microprocessor combined with state-of-the-art digital sensing technology to continuously monitor and manage humidity levels when installed in areas of the home prone to condensation and mildew. It features user-friendly controls to adjust sensitivity, humidity level and time out settings. The sensor can replace a single pole switch (DHS05) or a combination switch (DHD05) and can be used with most bathroom or ventilation fans or fan/light combinations. These devices offer flexible installation options, including wiring with a neutral or by using an earth ground connection, and a slim profile for ease of installation. Features Ideal for Bathroom, basement, laundry room and home spa Replaces a single pole switch for control of a ventilation fan or fan/light combination Automatically detects excess humidity in a room and activates the ventilation fan to lessen condensation which helps reduce mold and mildew Helps reduce energy usage by automatically operating the fan only when needed For use with ventilation fans up to ¼ HP Compatible with LED, CFL, Incandescent, Halogen, MLV and ELV lighting loads Can be connected to Neutral wire if Neutral is present in the wallbox; or to Earth ground if no Neutral wire is present in the wallbox Interchangeable line and load wires saving installation time Microprocessor control with digital sensing technology Zero Cross turn-on technology extends the life of switching relays Advanced sensing enhances detection when the room is occupied and minimizes false triggers when unoccupied Operating Modes for bath fan, air cycle and humidistat Test mode to help with sensor placement and setting adjustments Can be used to comply with the requirements of 2019/2022 California Title 24, Part 6, Indoor Air Quality and Mechanical Ventilation Complies with the requirements of 2019/2022 CALGREEN, Part II, Indoor Air Quality and Exhaust Meets requirements of ASHRAE 6 Technical Information Adjustment: Programmable Color: White Dimensions: W 1.73" X D 0.95" X H 4.13" Grade: Residential LED Color: Green and Red Load Rating: 600W Incandescent, 300W LED/CFL, 400VA ELV, 400VA MLV, 1/4th HP Motor Neutral: Optional Power Consumption: <0.5 Watts Sensor Type: Humidity Style Name: Decora Switch: Relay Switch Type: Single-Pole Time Delay: 10, 20, 30 or 45 minutes Voltage: 120 VAC Wallplate: Not Included Warranty: 5-Year Limited Wiring: Ground or Neutral Required ASHRAE 62.2: Yes CALGREEN: Yes California Title 24: Yes Standards and Certifications: CSA Document Brochure Sensor Buying Guide Instruction

Description The Leviton Humidity Sensor and Fan Control automatically detects excess humidity in a room and activates the ventilation fan to lessen condensation, which helps reduce mold and mildew. Additionally, the device helps reduce energy usage by automatically operating the fan only when needed. The sensor uses a microprocessor combined with state-of-the-art digital sensing technology to continuously monitor and manage humidity levels when installed in areas of the home prone to condensation and mildew. It features user-friendly controls to adjust sensitivity, humidity level and time out settings. The sensor can replace a single pole switch (DHS05) or a combination switch (DHD05) and can be used with most bathroom or ventilation fans or fan/light combinations. These devices offer flexible installation options, including wiring with a neutral or by using an earth ground connection, and a slim profile for ease of installation. Features Ideal for Bathroom, basement, laundry room and home spa Replaces a combination switch for separate control of fan and lighting Automatically detects excess humidity in a room and activates the ventilation fan to lessen condensation which helps reduce mold and mildew Helps reduce energy usage by automatically operating the fan only when needed For use with ventilation fans up to ¼ HP Compatible with LED, CFL, Incandescent, Halogen, MLV and ELV lighting loads Can be connected to Neutral wire if Neutral is present in the wallbox; or to Earth ground if no Neutral wire is present in the wallbox Microprocessor control with digital sensing technology Zero Cross turn-on technology extends the life of switching relays Advanced sensing enhances detection when the room is occupied and minimizes false triggers when unoccupied Operating Modes for bath fan, air cycle and humidistat Test mode to help with sensor placement and setting adjustments Can be used to comply with the requirements of 2019/2022 California Title 24, Part 6, Indoor Air Quality and Mechanical Ventilation Complies with the requirements of 2019/2022 CALGREEN, Part II, Indoor Air Quality and Exhaust Meets requirements of ASHRAE 62.2 Color change kits are available in Black, Brown, Gray, Ivory, Light Almond and White (DHDKT-00x) Five-Year Limited warranty Technical Information Adjustment: Programmable Color: White Dimensions: W 1.73" X D 0.95" X H 4.13" Grade: Residential LED Color: Green and Red Load Rating: Fan Load (Blue Wire): 1/4 HP Fan, 300W LED/CFL, 600W Incandescent/Halogen, 400VA MLV/ELV. Light Load (Red Wire): 150W LED/CFL, 250W Incandescent/Halogen, 200VA MLV, 250VA ELV, 2A Resistive Mounting Type: Wall Switch Neutral: Optional Power Consumption: <0.5 Watts Sensor Type: Humidity Style Name: Decora Switch: Relay Switch Type: Single-Pole/Single Pole Time Delay: 10, 20, 30 or 45 minutes Voltage: 120 VAC Wallplate: Not Included Warranty: 5-Year Limited Wiring: Ground or Neutral Required ASHRAE 62.2: Yes CALGREEN: Yes California Title 24: Yes Standards and Certifications: CSA Document Brochure Sensor Buying Guide Instruction

Description The Swidget product line has been developed to support the easy integration of Home Automation and Smart Home markets with unique and flexible solutions. Interchangeable Swidget Inserts can be installed, removed or replaced - making Swidget the optimal choice for building renovations and new construction. Adding a Swidget Insert turns the wired device into a powerful and flexible Smart Home device. The interchangeability of the Swidget Inserts ensure that the system can work with any existing or future Smart Home wireless system. Designed to be integrated into all major Smart Home protocols, the Swidget Wi-Fi Control transforms the Swidget Outlet or Switch into a Wi-Fi smart device. Using the free Swidget App (available for Android and iOS), unlock your Swidget device to perform any number of tasks: Power On/Off your outlet Monitor your energy consumption Schedule devices to conserve energy Set multiple automatic notifications including when your power consumption is too high As all Swidget Inserts operate on the Class 2 certified interface, an electrician is not required for installation or removal. When connected to a 2.4GHz Wi-Fi network, the Temperature & Humidity Insert can be used to create sensor-based automations, where temperature and humidity conditions can trigger actions in switches, outlets, send notifications, and more. Sensor information can also be relayed to various control systems, including Alexa and Google Assistant*, for use in a variety of applications. Features Wi-Fi 2.4GHz Independent power monitoring on each circuit Works with Amazon Alexa, Google Assistant and IFTTT* Regular OTA upgrades to expand capabilities * 3rd party integrations are controlled and managed by external service providers. Swidget makes no warranty that these services will continue to exist or be supported over the full life of the product. Technical Information Wireless standard: Wi-Fi 802.11g Wireless band: 2.4GHz Device compatibility: Amazon Alexa, Google Assistant and IFTTT Device upgrades: OTA Environmental: Indoor installation only Operating temperature: -10 °C to 40 °C (14 °F to 104 °F) Additional specs: Temperature Range: -10 - 40 °C (+/- 1 °C {after calibration}) Relative Humidity Range: 0 -100% {+/- 5% RH) Document Brochure Data Sheet

Description The Swidget product line has been developed to support the easy integration of Home Automation and Smart Home markets with unique and flexible solutions. Interchangeable Swidget Inserts can be installed, removed or replaced - making Swidget the optimal choice for building renovations and new construction. Adding a Swidget Insert turns the wired device into a powerful and flexible Smart Home device. The interchangeability of the Swidget Inserts ensure that the system can work with any existing or future Smart Home wireless system. Designed to be integrated into all major Smart Home protocols, the Swidget Wi-Fi Control transforms the Swidget Outlet or Switch into a Wi-Fi smart device. Using the free Swidget App (available for Android and iOS), unlock your Swidget device to perform any numberof tasks: Power On/Off your outlet Monitor your energy consumption Schedule devices to conserve energy Set multiple automatic notifications including when your power consumption is too high As all Swidget Inserts operate on the Class 2 certified interface, an electrician is not required for installation or removal. The Air Quality Sensor is a multi-functional device that contains several measurements including temperature, humidity, air pressure and total volatile organic compounds which are all used to calculate total air quality and equivalent CO2 levels. When connected to a 2.4GHz Wi-Fi network, the sensor can relay this information to the Swidget app or various control systems, including Alexa and Google Assistant*, for use in a variety of applications. Features Wi-Fi 2.4GHz Independent power monitoring on each circuit Works with Amazon Alexa, Google Assistant and IFTTT* Regular OTA upgrades to expand capabilities * 3rd party integrations are controlled and managed by external service providers. Swidget makes no warranty that these services will continue to exist or be supported over the full life of the product. Technical Information Wireless standard: Wi-Fi 802.11g Wireless band: 2.4GHz Device compatibility: Amazon Alexa, Google Assistant and IFTTT Device upgrades: OTA Environmental: Indoor installation only Operating temperature: -10 °C to 40 °C (14 °F to 104 °F) Additional specs: Temperature Range: -10 - 40 °C (+/- 1 °C {after calibration}) Relative Humidity Range: 0 - 100% {+/- 5% RH) Air Pressure: 300 - 1100 hPa (+/-2hPa) Calculated IAQ: 0 - 500 Calculated TVOC: 0- 1000 ppb (TBC) Calculated eCO2: 400 - 6000 ppm (TBC) Document Data Sheet Brochure

Description The Lutron Skylark Quiet Fan Speed Control is designed to conveniently set the speed of a single ceiling paddle fan. Install in a single pole or 3-way application; no neutral required. The Skylark Fan Control features a smooth, linear slider to adjust the fan’s speed and a rocker switch that turns the fan ON/OFF. Use the slider to select between 3-speeds (Low/Med/High) for a favorite preset level. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately). Features Includes (1) Lutron Skylark Quiet 3-Speed Fan Control; Gloss Finish, Clamshell Packaging Rated for 1.5A 3-speed Ceiling Paddle Fan For use with 1 ceiling paddle fan per control; not compatible with fans with proprietary remotes No Neutral Required; 120V Single Pole or 3-Way compatible Wire lead installation Rocker switch turns lights on/off to favorite preset level Linear Slider adjusts preset fan speeds; Low, Medium, High Technical Information Voltage: 120V Power Rating: 180W Action: On/Off Color/Finish: White Connection Type: Wire Leads Application: For Only One Ceiling Paddle Fan Amperage Rating: 1.5A Number of Poles: 1 Material: Plastic Document Brochure Installation Warranty