Skip to content
FAQ Shipping Returns Warehouse Pickup

Power Tool Accessories

Popular Sub Categories

  • Rack-A-Tiers #2 Blue Phillips & #2 Red Robertson Square Double Ended Impact Rated Bit, 6
    $4.99

    Rack-A-Tiers #2 Blue Phillips & #2 Red Robertson Square Double Ended Impact Rated Bit, 6" Long, Model 70226BR

    Rack-A-Tiers
    Description These impact rated bits will hold up to the rigorous strains caused by using an impact drill. The shallow tip design allows for the bit to be double sided and still stay in quick change impact drills. With a #2 Phillips and a #2 Square drive in your drill your covered for the majority of screws an electrician encounters on a day to day basis.
    • In stock
    • Eligible for free shipping
  • Rack-A-Tiers #1 Green & #2 Red Robertson Square Double Ended Impact Bit, 4
    $4.49

    Rack-A-Tiers #1 Green & #2 Red Robertson Square Double Ended Impact Bit, 4" long, Model 70214RG

    Rack-A-Tiers
    Description Finally, a double ended bit that actually stays in impact drills! These impact rated bits will hold up to the rigorous strains caused by using an impact drill. The shallow tip design allows for the bit to be double sided and still stay in quick change impact drills.
    • In stock
    • Eligible for free shipping
  • Rack-A-Tiers #2 Blue Phillips & #2 Red Robertson Square Double Ended Impact Rated Bit, 4
    $4.49

    Rack-A-Tiers #2 Blue Phillips & #2 Red Robertson Square Double Ended Impact Rated Bit, 4" Long, Model 70224BR

    Rack-A-Tiers
    Description These impact rated bits will hold up to the rigorous strains caused by using an impact drill. The shallow tip design allows for the bit to be double sided and still stay in quick change impact drills. With a #2 Phillips and a #2 Square drive in your drill your covered for the majority of screws an electrician encounters on a day to day basis.
    • In stock
    • Eligible for free shipping
  • Klein Tools KNECT™ Flip Impact Socket Set, SAE and Metric, 13-Piece, Model 65239*
    Special Order Item
    $132.65

    Klein Tools KNECT™ Flip Impact Socket Set, SAE and Metric, 13-Piece, Model 65239*

    Klein Tools
    Description This 20-Piece impact socket set features (10 SAE and 10 Metric) sizes combined into 10 color-coded sockets. Each impact flip socket features two coaxial spring-loaded sockets in one. Set includes Nested adapters for dual drive (1/4-Inch hex flip socket shaft nest into 3/8-Inch square drive adpater). Also comes with a Compact, modular storage system with a clear lid that is compatible with MODbox™ and stackable with other cases of its similar design. Features Multi-purpose adapter makes the sockets compatible with the Klein KNECT™ system for unlimited driving potential Deep Well Impact Flip Socket Set includes 20 SAE and metric sizes combined into 10 color-coded sockets plus two nested adapters and one extended shaft Set includes 1/4 x 5/16, 3/8 x 7/16, 1/2 x 9/16, 5/8 x 3/4, and 11/16 x 13/16 inch socket sizes and 8 x 10, 9 x 11, 12 x 14, 13 x 15, and 16 x 18mm socket sizes Six smaller sockets sizes 1/4-Inch to 9/16-Inch ( 8 to 14mm) are stackable on 650QSAL to quickly change socket sizes and reduce the number of tools needed Klein KNECT™ specialized square drive adapter compatible with Klein Tools pass through socket wrench (Cat. No. 65400) and any 3/8-Inch square drive ratchet Small parts storage tray inside the case to secure loose fasteners, washers and extra bits Compact, modular storage system with a clear lid is compatible with MODbox™ and stackable with other cases of its similar design Technical Information Type: Socket Set Application: Hex Driving Special Features: Flip Feature, Nested Adapter Overall Length: 9.25'' (23.5 cm) Overall Height: 1.63'' (4.1 cm) Overall Width: 5.25'' (13.3 cm) Material: Impact-Rated Steel Drive Size: 1/4'', 3/8'' Socket Size: 1/4'', 5/16'', 3/8'', 7/16'', 1/2'', 9/16'', 5/8'', 11/16'', 3/4'', 13/16'' Number of Pieces: 13 Standard: SAE, Metric Included: (10) Sockets, (2) Adapters, Case Weight: 2.69 lb (1.2 kg) UPC: 092644652394
    • Available for special order
  • Klein Tools 3-in-1 Impact Flip Socket, 5
    $12.99

    Klein Tools 3-in-1 Impact Flip Socket, 5" Length, Model 32767

    Klein Tools
    Description The 3-in-1 Impact Flip socket allows for quick switching between drive sizes. For use on an impact driver, this versatile socket includes three hex sizes: 5/16-Inch, 1/4-inch shallow (driver) and 1/4-Inch deep (bit holder). Rare-Earth magnet holds bits and hex head fasteners. Will also fit a Klein Tools screwdriver handles (Cat. Nos. 32303 and 32304). Features 3-in-1 Impact Flip Socket allows for quick switching between drive sizes Multi-function flip socket in hex driver sizes: 5/16-Inch, 1/4-Inch shallow (driver) and 1/4-Inch deep (screwdriver bit holder) Impact rated with a 1/4-Inch Quick-Connect adapter for easy use on an impact driver Powerful Rare-Earth magnet securely holds bits and hex head fasteners 5-Inch (13 cm) length shaft also fits Klein Tools Cat. Nos. 32303 and 32304 driver handles Precision machined and heat treated for long life Great for various applications including tight spaces and long reach Technical Information Type: Impact Flip Socket Application: Fastening; Impact Driving Special Features: Flip Socket, Rare-Earth Magnet Overall Length: 5'' (13 cm) Overall Height: 0.3'' (0.8 cm) Overall Width: 0.3'' (0.8 cm) Material: Steel Drive Size: 1/4'' Socket Size: 1/4'', 5/16'' Number of Points: 6 Standard: ASME B107.2 Weight: 3.2 oz (91 g) UPC: 092644327674 Document Brochure
    • In stock
    • Eligible for free shipping
  • Klein Tools Power Driver Set, Assorted Bits, 3-1/2-Inch, Model 32234
    $18.99

    Klein Tools Power Driver Set, Assorted Bits, 3-1/2-Inch, Model 32234

    Klein Tools
    Description Klein Tools has designed a set of Impact Power Bits for the professional electrician. All the bits are made of high-impact rated S2 steel and color coded for easy identification. The 1-1/4-Inch (6.4 mm) long driver bits are easier to grip than a standard 1-Inch (25.4 mm) bit. The bit holder and nut drivers have strong magnets, and are also designed longer so they reach easily into junction boxes. Minimal chamfering on the nut drivers’ hex pockets increases surface contact between the nut and driver for better performance. All 26 pieces fit snugly in a durable, impact-resistant case featuring steel hinges, a stay-shut latch, and a hidden compartment for loose bits. Benefits Longer pro impact power bits and drivers are designed to reach easily into boxes and panels S2 Impact-Rated Steel for maximum life and a 1/4-Inch hex shank 4-Inch bit extension with strong magnet to keep bits in place 1-1/4-Inch precision machined bits are longer and easier to grip 2-5/8-Inch nut drivers reach easily into junction boxes Extended 4-Inch Phillips and Square bits for hard-to-reach fasteners Bits are easy to find and fit securely in the storage case Case has a spring loaded stay-shut latch and a hidden storage area for loose bits Phillips, square, and combo tips are color coded by size: green- #1 size bits, red- #2 size bits, black- #3 size bits Slotted tips and nut drivers use ASME standard color coding Technical Information Application: Use with Power Impact Drivers For Use With: Impact Drivers Special Features: Strong Magnets, Longer Length Bits Nut Driver Sizes: 1/4'', 5/16'', 3/8'' Phillips Bits: 1-1/4'' (3.2 cm) Long: #1, #2, #3; 4'' (101.6mm) Long: #2 Slotted Bits: 1-1/4'' (3.2 cm) Long: 3/16'' (0.5 cm), 1/4'' (0.6 cm) Square Bits: 1-1/4'' (3.2 cm) Long: #1, #2, #3; 4'' (101.6 mm) Long: #2 Combo Bits: #2 Other Bits: 4'' (10.2 cm) Bit Extension Material: S2 Steel Overall Length: 5.5'' (14 cm) Overall Height: 1.9'' (4.8 cm) Overall Width: 4.7'' (11.9 cm) Package Quantity: 26 Weight: 9.6 oz (272 g)
    • Low stock
    • Eligible for free shipping
  • Klein Tools Flip Impact Socket Set, 7-Piece, Model 66070
    $86.79

    Klein Tools Flip Impact Socket Set, 7-Piece, Model 66070

    Klein Tools
    Description The 7-Piece Flip Impact Socket Set includes ten sizes combined into five sockets and two nested adapters. The two nested adapters allow for dual drive (1/4-Inch, 1/2-Inch) capability. The sockets are designed for use with an impact driver including Klein's Impact Wrench (Cat. Nos. BAT20CW, BAT20CW1) and Impact Driver (Cat. Nos. BAT20CD, BAT20CD1). Easy-to-use flip feature allows for quick changes between sizes and reduces the number of tools in the tool bag. All sockets and adapters store in a convenient case for easy portability. Features Flip Impact Socket Set includes ten sizes combined into five sockets plus two nested adapters Impact Socket Set Includes 3/8 x 7/16-Inch, 1/2 x 9/16-Inch, 5/8 x 11/16-Inch, 3/4 x 13/16-Inch, and 7/8 x 15/16-Inch socket sizes Easy-to-use flip feature allows for quick changes and reduces number of tools Nested adapters for dual drive (1/4-Inch, 1/2-Inch) capability; patent pending 6-Point design is easier to position and work with square fasteners Great for hardware installation and removal Cross hole design to prevent unintentional separation of adapter and socket Engineered for use with impact drivers including Klein's 1/2-Inch Compact Impact Wrench (Cat. Nos. BAT20CW, BAT20CW1) and 1/4-Inch Compact Impact Driver (Cat. Nos. BAT20CD, BAT20CD1) Sockets are color coded to quickly identify size Includes case for storage Technical Information Type: Impact Rated Application: General Use Special Features: Flip Feature, Nested Adapter Overall Length: 8.25'' (21 cm) Overall Height: 2.8'' (7.1 cm) Overall Width: 4.9'' (12.4 cm) Material: 4140 Steel Drive Size: 1/4'' Hex, 1/2'' Square Socket Size: 3/8 x 7/16'', 1/2 x 9/16'', 5/8 x 11/16'', 3/4 x 13/16'', and 7/8 x 15/16'' Number of Points: 6 Number of Pieces: 7 Included: (5) Sockets, (2) Adapaters and Carrying Case Weight: 2.9 lb (1.3 kg) Document Brochure
    • In stock
    • Eligible for free shipping
  • Klein Tools 2-Piece Flip Socket Set, 3
    $19.71

    Klein Tools 2-Piece Flip Socket Set, 3" and 5" Lengths, Model 32768

    Klein Tools
    Description Each 3-in-1 Impact Flip Socket allows for quick switching between drive sizes. For use on an impact driver, these versatile sockets include three hex sizes: 5/16-inch, 1/4-Inch shallow (driver) and 1/4-Inch deep (bit holder). Rare-Earth magnet holds bits and hex head fasteners. Set includes 3-Inch and 5-Inch (8 and 13 cm) length blades that will, also, fit Klein Tools screwdriver handles (Cat. Nos. 32303, 32304 or 32308). Features 3-in-1 Impact Flip Sockets allow for quick switching between drive sizes Multi-function flip socket in hex driver sizes: 5/16-Inch, 1/4-Inch shallow (driver), and 1/4-Inch deep (screwdriver bit holder) Impact rated with a 1/4-Inch Quick-Connect adapter for easy use on an impact driver Powerful Rare-Earth magnet securely holds bits and hex head fasteners Both blades also fit a Klein Tools screwdriver handle. 5-Inch (76 cm) shaft works with Klein Tools handles Cat. Nos. 32303 or 32304; 3-Inch (8 cm) shaft fits Klein Tools handle Cat. No. 32308 Precision machined and heat treated for long life Great for various applications including tight spaces, low clearance and long reach Technical Information Type: Impact Flip Socket Application: Fastening; Impact Driving Special Features: Flip Socket, Rare-Earth Magnet Overall Length: 3'' and 5'' (8 and 13 cm) Overall Height: 0.3'' (0.8 cm) Overall Width: 0.3'' (0.8 cm) Material: Steel Drive Size: 1/4'' Socket Size: 1/4'', 5/16'' Number of Points: 6 Standard: ASME B107.2 Weight: 4.96 oz (141 g) UPC: 092644327681 Document Brochure
    • In stock
    • Eligible for free shipping
  • Klein Tools 3-in-1 Impact Flip Socket, 3
    Out of Stock
    $10.51

    Klein Tools 3-in-1 Impact Flip Socket, 3" Length, Model 32766

    Klein Tools
    Description The 3-in-1 Impact Flip socket allows for quick switching between drive sizes. For use on an impact driver, this versatile socket includes three hex sizes: 5/16-Inch, 1/4-Inch shallow (driver) and 1/4-Inch deep (bit holder). Rare-Earth magnet holds bits and hex head fasteners. Will also fit a Klein Tools screwdriver handle (Cat. No. 32308). Features 3-in-1 Impact Flip Socket allows for quick switching between drive sizes Multi-function flip socket in hex driver sizes: 5/16-Inch, 1/4-Inch shallow (driver) and 1/4-Inch deep (screwdriver bit holder) Impact rated with a 1/4-Inch Quick-Connect adapter for easy use on an impact driver Powerful Rare-Earth magnet securely holds bits and hex head fasteners 3-Inch (8 cm) length shaft also fits a Klein Tools Cat. No. 32308 driver handle Precision machined and heat treated for long life Great for various applications including tight spaces and low clearance areas Technical Information Type: Impact Flip Socket Application: Fastening; Impact Driving Special Features: Flip Socket, Rare-Earth Magnet Overall Length: 3'' (8 cm) Overall Height: 0.3'' (0.8 cm) Overall Width: 0.3'' (0.8 cm) Material: Steel Drive Size: 1/4'' Socket Size: 1/4'', 5/16'' Number of Points: 6 Standard: ASME B107.2 Weight: 3.2 oz (91 g) UPC: 092644327667 Document Brochure
    • Temporarily out of stock
    • Notify me when back in stock
  • Klein Tools Drill Tap Tool Kit, 8-Piece, Model 32217
    $64.99

    Klein Tools Drill Tap Tool Kit, 8-Piece, Model 32217

    Klein Tools
    Description This convenient kit comes with 8 commonly used tap tools. For aluminum, brass, copper, plastic and mild steel. Klein provides two of the smallest sizes for a total of 8 taps. Each works easily with the quick connect in power tools. Benefits Drill, tap and deburr in one easy step For aluminum, brass, copper, plastic and mild steel Designed for use on up to 10 gauge metal 1/4-Inch hex for easier application with quick connect High-speed steel for added durability 6-32, 8-32, 10-32, 10-24, 12-24 and 1/4-20 tap sizes Includes a carrying case to keep your taps in one place for immediate access Technical Information Application: For Aluminum, Brass, Copper, Plastic and Up to 10 Gauge Metal Features: Drill, Tap, and Deburr in One Step Tap Sizes: 6-32 (2), 8-32 (2), 10-24, 10-32, 12-24, 1/4-20 Material: High-Speed Steel Overall Length: 4'' (10.2 cm) Weight: 1.5 lb (0.7 kg) Documents Drill Tap Specification sheet
    • Low stock
    • Eligible for free shipping
  • Milwaukee Shoulder Strap, Model 49-16-2722
    $29.17

    Milwaukee Shoulder Strap, Model 49-16-2722

    Milwaukee
    Description The Milwaukee® shoulder strap is for use with the M18™ FUEL™ string trimmer (2725-20) and the Milwaukee® M18™ FUEL™ power head with QUIK-LOK™ (2825-20). The strap is padded and transfers the weight of the tool to the body, increasing comfort and reducing fatigue during extended use.
    • Only 1 left in stock
    • Eligible for free shipping
  • Milwaukee M18 FUEL™ QUIK-LOK™ Articulating Hedge Trimmer Attachment, Model 49-16-2719
    Out of StockSale
    $313.83
    $248.00

    Milwaukee M18 FUEL™ QUIK-LOK™ Articulating Hedge Trimmer Attachment, Model 49-16-2719

    Milwaukee
    Description The Milwaukee® M18™ FUEL™ QUIK-LOK™ articulating hedge trimmer attachment is powered by the M18™ FUEL™ power head with QUIK-LOK™ and is compatible with the QUIK-LOK™ attachment system. The attachment's articulating mechanism allows for 270° rotation of the blade set, which offers 13 operating positions and 1 storage position. The hedge trimmer attachment has a 20 in. blade with 1 in. cut capacity, clearing more material in a single pass. The hedge trimmer head includes a tip guard to prevent damage to the blade and surrounding work area, as well as a padded grip for optimal hand placement and increased comfort. The QUIK-LOK™ attachments have protected drive shafts for increased durability against drops and storage elements. The hedge trimmer attachment also has optimized gearing to manage the cordless M18™ FUEL™ power head RPM output specifically for hedge trimming applications. Benefits Compatible with the M18 FUEL™ Power Head w/ QUIK-LOK™ Articulating Head Design: Adjustment Handle And Sliding Adjustment Collar Allow for 270° Blade Set Rotation, Delivering 13 Operating Positions and 1 Storage Position Tip Guard: Prevents Damage To Blade and Surrounding Work Area Padded Grip: For Optimal Hand Placement and Increased Comfort Blade Length: 20" Cut Capacity: 1" SPM: 3,500 Length: 60" Weight: 5.8 lbs Document Operator Manual
    • Temporarily out of stock
    • Notify me when back in stock
  • Klein Tools Pro Impact Power Bit Set, 26 Piece, Model 32799
    $39.99

    Klein Tools Pro Impact Power Bit Set, 26 Piece, Model 32799

    Klein Tools
    Description Klein Tools has designed a set of Impact Power Bits for the professional electrician. All the bits are made of high-impact rated S2 steel and color coded for easy identification. The 1-1/4-Inch (6.4 mm) long driver bits are easier to grip than a standard 1-Inch (25.4 mm) bit. The bit holder and nut drivers have strong magnets, and are also designed longer so they reach easily into junction boxes. Minimal chamfering on the nut drivers’ hex pockets increases surface contact between the nut and driver for better performance. All 26 pieces fit snugly in a durable, impact-resistant case featuring steel hinges, a stay-shut latch, and a hidden compartment for loose bits. Benefits Longer pro impact power bits and drivers are designed to reach easily into boxes and panels S2 Impact-Rated Steel for maximum life and a 1/4-Inch hex shank 4-Inch bit extension with strong magnet to keep bits in place 1-1/4-Inch precision machined bits are longer and easier to grip 2-5/8-Inch nut drivers reach easily into junction boxes Extended 4-Inch Phillips and Square bits for hard-to-reach fasteners Bits are easy to find and fit securely in the storage case Case has a spring loaded stay-shut latch and a hidden storage area for loose bits Phillips, square, and combo tips are color coded by size: green- #1 size bits, red- #2 size bits, black- #3 size bits Slotted tips and nut drivers use ASME standard color coding Technical Information Application: Use with Power Impact Drivers For Use With: Impact Drivers Special Features: Strong Magnets, Longer Length Bits Nut Driver Sizes: 1/4'', 5/16'', 3/8'' Phillips Bits: 1-1/4'' (3.2 cm) Long: #1, #2, #3; 4'' (101.6mm) Long: #2 Slotted Bits: 1-1/4'' (3.2 cm) Long: 3/16'' (0.5 cm), 1/4'' (0.6 cm) Square Bits: 1-1/4'' (3.2 cm) Long: #1, #2, #3; 4'' (101.6 mm) Long: #2 Combo Bits: #2 Other Bits: 4'' (10.2 cm) Bit Extension Material: S2 Steel Overall Length: 5.5'' (14 cm) Overall Height: 1.9'' (4.8 cm) Overall Width: 4.7'' (11.9 cm) Package Quantity: 26 Weight: 9.6 oz (272 g) Document Brochure
    • In stock
    • Eligible for free shipping
  • Greenlee 5-Piece Quick Change Stainless Steel Hole Cutter Kit, Model 655
    Sale
    $165.24
    $132.19

    Greenlee 5-Piece Quick Change Stainless Steel Hole Cutter Kit, Model 655

    Greenlee
    Description Greenlee’s stainless steel hole cutter set cuts stainless steel quickly and easily. Kwik change arbor allows you to change cutter heads with a simple push and a turn. Use the same arbor for different size cutting heads. Removable cutter heads included 7/8-Inch , 1-1/8-Inch and 1-3/8-Inch . Minimum chuck size of 3/8-Inch . Included in Kit The Following Individual Carbide-Tipped Hole Cutters: 645-7/8: 7/8" (22.2 mm), Conduit size 1/2" 645-1-1/8: 1-1/8" (28.6 mm), Conduit size 3/4" 645-1-3/8: 1-3/8" (34.9 mm), Conduit size 1" 645-011: Quick Change Arbor for sizes 5/8" through 2-1/4", 3/8" shank 645-001: Pilot Drill for sizes 5/8" through 2-1/4" Hex Key Case Benefits Cuts stainless steel quickly and easily. Quick Change arbor allows you to change cutter heads with a simple push and a turn. Use the same arbor for different size cutting heads. Removable cutter heads available in sizes from 5/8" through 3". Flange stop prevents over-drilling. Ejector Spring on all sizes above 3/4" makes removal of slug easier. Replaceable, cobalt-steel pilot drill with split-point tip to prevent walking. Precision carbide teeth for optimum performance and durability. Technical Information Brand: Greenlee Weight: 521 g Product Dimensions: 19.1 x 11.7 x 5.3 cm Material: Stainless Steel
    • In stock
    • Free shipping
  • Milwaukee M18 FUEL™ QUIK-LOK™ 3 Ft. Attachment Extension, Model 49-16-2721
    Out of StockSale
    $123.38
    $98.00

    Milwaukee M18 FUEL™ QUIK-LOK™ 3 Ft. Attachment Extension, Model 49-16-2721

    Milwaukee
    Description The Milwaukee® M18™ FUEL™ QUIK-LOK™ 3' attachment extension is powered by the M18™ FUEL™ power head with QUIK-LOK™ and is compatible with the QUIK-LOK™ 10 in. pole saw and articulating hedge trimmer attachments. The extension attachment provides 3' of additional length for applications requiring further reach. The attachment has a padded grip providing increased comfort. The extension's QUIK-LOK™ coupler has a positive locking mechanism and alignment guide allowing for quick attachment changes. The QUIK-LOK™ attachments feature protected drive shafts for increased durability against drops and storage elements. Benefits Compatible with the M18 FUEL™ Power Head w/ QUIK-LOK™ QUIK LOK Coupler: Positive-Locking Mechanism And Alignment Guide For fast, Tool Free Attachment Changes Padded Grip: For Optimal Hand Placement and Increased Comfort Protected Drive-Shaft: Provides Greater Durability To Drive-Shaft Against Damage From Drops and Storage Elements Compatible with QUIK-LOK™ Hedge Trimmer and Pole Saw Attachments Delivers 3' of additional reach Length: 40.5" Weight: 1.95 lbs
    • Temporarily out of stock
    • Notify me when back in stock
  • Klein Tools 3 Piece Premium All Purpose Quick-Release Step Bit Kit, Model QRST3PC*
    Special Order Item
    $129.99

    Klein Tools 3 Piece Premium All Purpose Quick-Release Step Bit Kit, Model QRST3PC*

    Klein Tools
    Description The All Purpose Quick Release Step Bit Kit contains three commonly used bits sized 1/2-Inch, 3/4-Inch, and 7/8-Inch plus and cutting oil. These Dual Spiral Flutes help pull the step bit through the material for faster cutting. The aluminum titanium coating is 10 times more durable than steamed black oxide for longer bit life. Impact rated, the 1/4-Inch hex shank provides a firm, positive grip and allows quick and convenient usage with an impact driver and a drill. The compact, modular case is designed to nest neatly within MODbox™ toolboxes and on the MODbox™ Case Adapter Side Rail Attachment. Features Step bits are coated with aluminum titanium nitride and are 10 times more durable than steamed black oxide coating for longer bit life Impact rated shaft allows for use with impact drivers and standard drills Double spiral flute removes chips for faster cuts and drilling Laser markings are easy to read for quick size identification Fast-starting, non-walking drill tip Quick-release, 1/4-Inch hex shank provides a firm, positive grip and won't spin out in the drill For use on steel (up to 16 gauge), wood, plastic, and aluminum The compact, modular case comes with cutting oil and is designed to nest neatly within MODbox™ toolboxes and on the MODbox™ Case Adapter Side Rail Attachment. Technical Information Type: Step Drill Bit Application: Multi-Material Drilling Special Features: Aluminum Titanium Coating; Impact Shaft; Dual Spiral Fluting; Cutting Oil Included Shank Type: 1/4'' Hex Flute Type: Spiral Overall Length: 0.5'' (1.3 cm) to 0.88'' (2.2 cm) Overall Height: 2.8'' (7.1 cm) to 3.4'' (8.6 cm) Overall Width: 0.5'' (1.3 cm) to 0.88'' (2.2 cm) Material: High Speed Steel Number of Holes: 13, 9, and 12 Increment: 1/32'' (0.8 mm); 1/16'' (1.6 mm); 1/16'' (1.6 mm) Size: 1/8'' – 1/2'' (3.2 – 12.7 mm); 1/4'' – 3/4'' (6.4 – 19.1 mm); 3/16'' – 7/8'' (4.8 mm – 22.2 mm) Weight: 1.1 oz (31 g) to 2.24 oz (64 g) Document Brochure
    • Available for special order
  • Milwaukee .095 in. x 250 Ft. Trimmer Line, Model 49-16-2713
    $32.35

    Milwaukee .095 in. x 250 Ft. Trimmer Line, Model 49-16-2713

    Milwaukee
    Description The Milwaukee® .095” string trimmer line utilizes high grade polymers and a full mass, twisted design to provide longer life, greater cutting power, and longer run-time. Benefits Longer Life Longer Run-Time Greater Cutting Power Technical Information Height: 8.54" Length: 1.97" Weight: 1.03 lbs Width: 7.48"
    • Low stock
    • Eligible for free shipping
  • Milwaukee M18 FUEL™ String Trimmer w/ QUIK-LOK™ Attachment Capability (Tool Only), Model 2825-20ST
    Out of StockSale
    $414.88
    $328.00

    Milwaukee M18 FUEL™ String Trimmer w/ QUIK-LOK™ Attachment Capability (Tool Only), Model 2825-20ST

    Milwaukee
    Description The Milwaukee® M18™ FUEL™ string trimmer with QUIK-LOK™, designed for landscape maintenance professionals, provides the power to clear thick brush, reaches full throttle in under 1 second, and delivers up to 1 hour of run-time per charge. The cordless string trimmer is made of two components – the M18™ FUEL™ power head with QUIK-LOK™ and QUIK-LOK™ string trimmer attachment. This M18™ FUEL™ power head, part of the QUIK-LOK™ attachment system, is compatible with multiple attachments such as our edger, articulating hedge trimmer, and pole saw attachment. This allows attachments to be swapped out on a single power head, delivering ultimate versatility and a lower cost of ownership. The POWERSTATE™ brushless motor delivers up to 6,200 RPM with up to a 16 in. cutting swath, and gives you the power to maintain speed in demanding applications without bogging down. The motor is positioned in the rear of the trimmer to provide the best combination of power, balance, and maneuverability. REDLINK Plus™ intelligence ensures maximum performance while protecting from overload, overheating and over discharge. The advanced electronic package delivers instantaneous throttle response, high and low speeds, and a variable speed trigger for ultimate control over the power range. The M18™ REDLITHIUM™ HD9.0 battery (sold separately) provides best in class performance and run-time in all applications, delivering up to 1 hour of run-time per charge. The easy load trimmer head offers an easy line loading experience and enables reloads of 25 Ft. of trimmer line in under 30 seconds. The M18™ FUEL™ string trimmer with QUIK-LOK™ is part of the M18™ system which is fully compatible with over 175 tools. Kit includes: (1) M18 FUEL™ Power Head w/ QUIK-LOK™ (1) M18 FUEL™ QUIK-LOK™ String Trimmer Attachment (49-16-2717) Benefits POWERSTATE™ Brushless Motor: Purposely built for the M18 FUEL™ Power Head w/ QUIK-LOK™ to generate the power and performance of high voltage platforms REDLINK PLUS™ Intelligence: Optimizes performance, provides overload protection preventing damage to tool and battery during heavy applications; compatible across the M18™ System. M18™ REDLITHIUM™ HIGH OUTPUT™ XC8.0 Battery Pack: Provides 50% more power and runs 50% cooler vs. M18™ REDLITHIUM™ XC Battery Packs Part of the M18 FUEL™ QUIK-LOK™ Attachment System Features the Milwaukee® Easy Load Trimmer Head RPM: 0-4900 / 0-6200 Cutting Swath: 14" - 16" Line Diameter: 0.080" / 0.095" Trigger: Variable Speed Technical Information Height: 11.25" Length: 70.5" Tool Warranty: 3 years. Weight: 9.85 lbs Width: 13" Power Source: Cordless Battery System: M18
    • Temporarily out of stock
    • Notify me when back in stock
  • Leviton 200A 120/240V 42 Circuit 42 Spaces Indoor Load Center and Window Door with Main Breaker, Model LP420-CBW
    Out of Stock
    $383.99

    Leviton 200A 120/240V 42 Circuit 42 Spaces Indoor Load Center and Window Door with Main Breaker, Model LP420-CBW

    Leviton
    Description The Leviton Load Center is designed and engineered utilizing the latest safety technologies, incorporating GFCI, AFCI and Dual Function circuit breakers into the heart of the load center to help protect families and homes. These Load centers are free of excess wires and pigtails, allowing easy access during installation and for inspectors to check torque. With many advantages these new modern, aesthetically pleasing units are the smarter solution for your homes electrical management hub. ****For security reasons, we cannot accept returns for load centers. Benefits An observation window in the cover allows at-a-glance operating status of all the circuit breakers Terminate all hot and neutral wires at custom lugs in the panel, not at the circuit breaker Entire panel can be wired at rough-in without circuit breakers installed. At final installation, simply plug-on the circuit breaker Easily invertible for bottom feed applications Copper bus is a standard feature on all load centers Notches stamped into the enclosure for cable ties promote secure and neat wiring For applications up to 60A when using copper wire; or 50A when using aluminum wire Technical Information Type: Indoor With Window Type of Load Center: Main Breaker Amperage: 200 A Voltage: 120/240 VAC Short Circuit Current Rating: 22 KA Spaces / Circuits: 42 / 42 Busbar Material: Copper, Bright Tin-Plated Enclosure Material: Galvanized Steel, White Powder Coat Dimensions: 43" H x 14.25" W x 4" D / 45.3" H x 16.25" W Weight: 32.8 lbs / 20.3 lbs Ground Connection: 4 AWG - 2/0 AWG Cu/Al Supply Connections: 3 AWG - 300 MCM Cu/Al NEMA Enclosure Type: NEMA 1 Indoor Operating Temperature: 0°C to 40°C Standards and Certifications CSA: Yes UL 50: Yes UL 50E: Yes UL 67: Yes UL 869A: Yes Documents Instruction Sheet Product Brochure Line Card
    • Temporarily out of stock
    • Notify me when back in stock
  • Milwaukee M18 FUEL™ QUIK-LOK™ 10 in. Pole Saw Attachment, Model 49-16-2720
    Sale
    $238.00
    $215.34

    Milwaukee M18 FUEL™ QUIK-LOK™ 10 in. Pole Saw Attachment, Model 49-16-2720

    Milwaukee
    Description The Milwaukee® M18™ FUEL™ QUIK-LOK™ 10 in. pole saw attachment is powered by the M18™ FUEL™ power head with QUIK-LOK™ and is compatible with the QUIK-LOK™ attachment system. The unit has a 10 in. Oregon bar and chain which delivers smooth and fast cuts with minimal kickback. The pole saw attachment has an automatic oiler for proper chain lubrication, easy access chain tensioner for quick adjustments to chain tension, and a branch hook for added cutting leverage and branch removal. The QUIK-LOK™ attachments have protected drive shafts for increased durability against drops and storage elements. The pole saw attachment also utilizes optimized gearing to manage the cordless M18™ FUEL™ power head RPM output specifically for cutting applications. Benefits Compatible with the M18 FUEL™ Power Head w/ QUIK-LOK™ Automatic Oiler: For Proper Chain Lubrication and Increased Productivity Easy Access Chain Tensioner: Quick Adjustments to Chain Tension Translucent Oil Reservoir: Clear visibility to oil levels Branch Hook: For Added Cutting Leverage and Branch Removal Padded Grip: For Optimal Hand Placement and Increased Comfort RPM: 4,600 Bar Length: 10" Chain Gauge: .043" Chain Pitch: 3/8" Low Profile Document Operator Manual
    • Only 1 left in stock
    • Free shipping
  • Klein Tools Hex Shaft Replacement Parts, 4-Pack, Model 32944*
    Special Order Item
    $26.99

    Klein Tools Hex Shaft Replacement Parts, 4-Pack, Model 32944*

    Klein Tools
    Description The 4-Pack Flip Socket Replacement Shafts come in a variety of sizes and are compatible with Klein's flip sockets (sockets not included). Shafts quickly attach to an impact driver or our 1/4-Inch quick-connect handles; driver and handles sold separately. Each piece is impact rated, making it an essential tool for the toughest driving applications. Features 2, 3-1/2, 5 and 6-1/2-Inch in length Shafts are impact rated and designed for heavy-duty applications Hex Shaft Replacement Parts come in a pack of four different lengths for varying needs on the jobsite Each part is a different size to accommodate different jobsite applications Compatible with Klein's Flip sockets (Cat. Nos. 32910, 32910RCHT, 32931, 32931M, 32932, 32932M, 32933, 32933M, 32934); sold separately Flip sockets can be stored in any order or orientation on the shaft Impact driver, flip sockets, and handles not included Technical Information Type: Replacement Part Application: Fastening; Impact Driving Special Features: Impact Rated Overall Length: 0.28'' (0.7 cm) Overall Height: 6.6'' (16.8 cm) Overall Width: 0.32'' (0.8 cm) Material: Steel Alloy Weight: 4 oz (113 g) Included: 2'', 3.5'', 5'', 6.5'' Hex Shafts Number of Pieces: 4 UPC: 092644328633 Document Brochure
    • Available for special order
  • Greenlee Combination Drill and Tap Bit, 8-32NC, Model DTAP8-32*
    Sale
    $12.98
    $11.19

    Greenlee Combination Drill and Tap Bit, 8-32NC, Model DTAP8-32*

    Greenlee
    Description Use the combination drill/tap bit to complete hole drilling, tapping and deburring/countersinking tasks with your power drill. The bit is made of hardened high-speed steel for durability. Benefits Complete hole drilling, tapping and deburring/countersinking in one operation with power drill saves labor and time Back tapered beyond tap to prevent thread damage from over-drilling Deburr/countersink also provided on bit beyond back taper Made from hardened high-speed steel vs. carbon steel for longer life High quality hex shank to ensure strong connection to drill chuck Designed to tap up to 10-gauge metal Quick change adaptor included in both metric and standard kits Technical Information Brand: Greenlee Material thickness: 10 gauge Material type: mild steel, copper, brass, aluminum Shank: 1/4" quick change hex Drill Material: hardened high speed steel Drill point: split point with web thinning Size: 8-32NC
    • Low stock
    • Eligible for free shipping
  • Rack-A-Tiers Robertson 12 Piece Bit Kit, Model 70012
    Out of StockSale
    $19.99
    $15.99

    Rack-A-Tiers Robertson 12 Piece Bit Kit, Model 70012

    Rack-A-Tiers
    Description The Original Robertson square drive bit, is the original and still best fitting drive bit. Robertson bits have hardened tips that fit better and last longer. Perfect for color-coding. It’s easy to use and harder to lose, saving you a ton of time. Benefits Color coding for easy use Hardened tips that fit better and last longer Kit contains: (1 each) 1-in x #0, 1-in x #1, 2-in x #1, 2-in x #3, 3-in x #1, 3-in x #3 (2 each) 1-in x #2, 2-in x #2, 3-in x #2 Documents Specification sheet
    • Temporarily out of stock
    • Notify me when back in stock
  • Rack-A-Tiers Impact Driver Bits - Square, #2 Red Robertson, 6 in, Model 70266R
    $4.99

    Rack-A-Tiers Impact Driver Bits - Square, #2 Red Robertson, 6 in, Model 70266R

    Rack-A-Tiers
    Description These impact rated driver bits are made from a stronger steel to withstand the added stress. Featuring the same colour coding as Rack-A-Tiers famous Racky Bits. Red #2 Robertson Square Bit, 6 inches long.
    • In stock
    • Eligible for free shipping
  • Greenlee Quick Change Pilot Drill Bit, 1/4-Inch, Model 645-001*
    Special Order Item
    $12.94

    Greenlee Quick Change Pilot Drill Bit, 1/4-Inch, Model 645-001*

    Greenlee
    Description With the Greenlee 645-001 Pilot Drill Bit, you can create holes in materials with your compatible Greenlee arbor (sold separately). The drill bit features a split-point tip to help prevent walking, and the cobalt steel construction ensures rugged durability. Technical Information Brand: Greenlee Application: Use with Greenlee arbors 5/8 - 2-1/4". Split-point tip design eliminates need for center punch and resists walking. Material: Steel Tool Type: Pilot drill bit Bit Diameter: 1/2"
    • Available for special order
  • ElectriPro Replacement BIT 3pck, Model MEGABIT*
    Out of Stock
    $7.99

    ElectriPro Replacement BIT 3pck, Model MEGABIT*

    ElectriPro
    Description ElectriPro replacement bits are made from professional quality S2 steel for optimal strength and durability. This bit 3 pack includes the 3 most used screwdriver bits. Benefits CSA/ UL Approved Includes (1) #1 & #2 Double Ended Phillips Bit (1) #1 & #2 Double Ended Robertson Bit & (1) #4 & #6 Double Ended Slot Bit
    • Temporarily out of stock
    • Notify me when back in stock
  • Klein Tools ProFlex Impact Driver Bit Set, 40-Piece, Model 33801*
    Special Order Item
    $32.49

    Klein Tools ProFlex Impact Driver Bit Set, 40-Piece, Model 33801*

    Klein Tools
    Description Klein Tools designed a set of ProFlex Torsion Zone Impact Driver Bits for the professional tradesman and do-it-yourself enthusiasts. All of the bits are made of high-impact rated S2 steel and feature an optimized torsion zone that absorbs impact forces to increase the lifetime of the bit. The 3-Inch bit holder and 1/4-Inch and 5/16-Inch nut drivers have strong magnets to easily hold bits and fasteners in place. Minimal chamfering on the nut drivers hex pockets increases surface contact between the nut and driver for better performance. All 40 pieces fit in a durable, impact-resistant case featuring steel hinges, a stay-shut latch and modular stackability with other cases of similar design. Features Impact Driver Bit Set with ProFlex torsional recoil system features energy absorbing technology to extend the life of the bit S2 impact-rated steel bits built for heavy-duty applications Extended length 3.5-Inch #2 Phillips and #2 Square bits to easily access hard to reach fasteners Compact, modular storage system is compatible with MODbox™ and stackable with other cases of similar design Set includes 3-Inch bit extension with strong magnet to keep bits in place Variety of Phillips, Slotted, Square and TORX® bits to drive the most common fasteners on the job 1/4-Inch and 5/16-Inch magnetic power nut drivers Technical Information Application: Impact Driving and Screwdriving For Use With: Impact Drivers Special Features: Proflex Torsion Zone - Impact Ready, Spring Loaded Clip, Modular Case Nut Driver Sizes: 1/4''; 5/16'' Phillips Bits: #1, #2, #3 Slotted Bits: 3/16'', 1/4'', 5/16'' Square Bits: #1, #2, #3 TORX® Bits: T15, T20, T25, T27, T30 Other Bits: 3/8'' Square Impact Adapter Material: S2 Tool Steel Magnetic: Yes Overall Length: 7'' (17.8 cm) Overall Height: 1.75'' (4.5 cm) Overall Width: 3.75'' (9.5 cm) Package Quantity: 1 Number of Pieces: 40 Weight: 1.08 lbs (0.5kg) UPC: 092644338014
    • Available for special order
  • Milwaukee .080 in. x 150 Ft. Trimmer Line, Model 49-16-2712
    Out of Stock
    $17.60

    Milwaukee .080 in. x 150 Ft. Trimmer Line, Model 49-16-2712

    Milwaukee
    Description The Milwaukee® .080 in. string trimmer line utilizes high grade polymers and a full mass, twisted design to provide longer life, greater cutting power, and longer run-time. Benefits Longer Life Longer Run-Time Greater Cutting Power Technical Information Height: 6.97" Length: 1.38" Weight: 0.37 lbs Width: 5.91"
    • Temporarily out of stock
    • Notify me when back in stock
  • Greenlee Nail Eater Auger Drill Bit, 7/8-Inch x 18-Inch, Model 66PT-7/8
    $50.01

    Greenlee Nail Eater Auger Drill Bit, 7/8-Inch x 18-Inch, Model 66PT-7/8

    Greenlee
    Description Designed with an improved cutting-edge for easier cutting, cleaner holes, and prolonged lifespan. Features super tough, heat-treated steel that cuts through nails, while the self-feeding screw point tip draws the bit through wood. Cuts holes 7/8" in diameter. Benefits Made from tough, heat-treated steel with a powerful cutting edge Produces precise, clean holes Self-feeding screw point helps draw the bit through wood with ease Unique cutting angle ensures smooth starts and reduced cutting loads Capable of cutting through nails again and again For additional length, use a Greenlee bit extension (sold separately) Hexagonal shank type Improved cutting edge provides 30% longer life span Patented new design for improved cutting and cleaner holes Self-feeding screw point draws bit through wood Unique patented design cutting angle - smoother starts, reduced cutting loads Made of super tough, heat-treated steel Cuts through nails and provides longer life "Shorty" bits - for working in tight places, yet still can go through three abutting 2 x 4s Technical Information Brand: Greenlee Bit Diameter: 7/8" (22.2 mm) Shank Diameter: 7/16" (11.1 mm) Overall Length: 18" (457.2 mm) Twist Length: 15" (381 mm) Shank Type: Hexagonal Weight: 1.5 lb (681 g) Documents Brochure
    • In stock
    • Eligible for free shipping
  • Milwaukee M18 FUEL™ QUIK-LOK™ Edger Attachment, Model 49-16-2718
    Sale
    $212.95
    $168.00

    Milwaukee M18 FUEL™ QUIK-LOK™ Edger Attachment, Model 49-16-2718

    Milwaukee
    Description The Milwaukee® M18™ FUEL™ QUIK-LOK™ edger attachment is powered by the M18™ FUEL™ power head with QUIK-LOK™ and is compatible with the QUIK-LOK™ attachment system. The unit has an 8 in. blade and high strength guard for increased durability. The edger includes mud flaps to prevent dirt kickback as well as a skid plate to protect the gearbox from concrete contact. The adjustable wheel allows for setting an optimized blade depth and tool angle for maximum control. The QUIK-LOK™ attachments feature protected drive shafts for increased durability against drops and storage elements. The edger attachment utilizes optimized gearing to manage the cordless M18™ FUEL™ power head RPM output specifically for edging applications. Benefits Compatible with the M18 FUEL™ Power Head w/ QUIK-LOK™ High Strength Guard: Metal Alloy Guard Delivers Greater Durability And Includes Blade Indication For Cut-Line Visibility Adjustable Wheel: Optimizes Blade Depth and Tool Angle For Maximum Control Mud Flaps: Prevents Dirt and Debris Kick-Back Skid Plate: Protects Gear Box From Concrete Contact Blade Size: 8" RPM: 3,900 Length: 38" Weight: 5.25 lbs Document Operator Manual
    • Low stock
    • Free shipping
  • Klein Tools Carbide Hole Cutter, 7/8-Inch, Model 31852*
    Special Order Item
    $34.99

    Klein Tools Carbide Hole Cutter, 7/8-Inch, Model 31852*

    Klein Tools
    Description This carbide hole cutter cuts quick, precise holes in a variety of materials. Integrated flange prevents the operator from drilling beyond the sheet metal. Split point pilot drill bit prevents bit walking. Features Cuts quick, precise holes in stainless steel, mild steel, iron, copper, and brass sheet up to 3/16-Inch (5 mm) thick Split point pilot drill bit prevents bit walking Integrated flange prevents the operator from drilling beyond the sheet metal Conduit and pipe sizes: 1/2-Inch (13 mm) Uses replacement pilot bit 31874 Technical Information Hole Diameter: 7/8'' (2.2 cm) Conduit Sizes: 0.5'' (1.3 cm) Shank Size: 3/8'' (1 cm)
    • Available for special order
  • Milwaukee 4-1/8 in. HOLE DOZER™ Bi-Metal Hole Saw, Model 49-56-0217
    Out of Stock
    $28.78

    Milwaukee 4-1/8 in. HOLE DOZER™ Bi-Metal Hole Saw, Model 49-56-0217

    Milwaukee
    Description The MILWAUKEE® 4-1/8" HOLE DOZER™ Bi-Metal Hole Saws new 3.5TPI tooth design offers users the longest life in metal applications. These HOLE DOZER™ Bi-Metal Hole Saws feature the industry's only Lifetime Tooth Break Warranty and can take on all general purpose applications, making them the most durable hole saws. Our ALL-ACCESS SLOTS solve the frustration of plug removal, making users more productive with less downtime between holes. The new slot design also gives users increased pilot visibility for accurate placement and faster chip ejection keeping their cut cool. HOLE DOZER™ Thermoset Coating allows for faster cutting and is optimized for cordless tools, delivering users 25% more holes per charge. Milwaukee HOLE DOZER™ Bi-Metal hole saws are proudly made in the USA. Benefits RIP GUARD™ Limited Lifetime Tooth Break Warranty Thermoset Coating, Delivers Up to 2X Faster Cuts in Wood PLUG JACK™, an all access slot design for fast plug removal Bi-Metal construction with 8% cobalt for increased wear resistance Technical Information Size: 4-1/8'' hole Thread: 1/2"-20 Depth of Cut: 1-5/8"
    • Temporarily out of stock
    • Notify me when back in stock
  • Milwaukee 5/8 in. x 6-1/2 in. Auger Bit, Model 48-13-0725*
    $12.69

    Milwaukee 5/8 in. x 6-1/2 in. Auger Bit, Model 48-13-0725*

    Milwaukee
    Description The Milwaukee® 5/8 in. x 6-1/2 in. auger bit features double wing spurs for fast, clean holes in wood. Designed with electricians, plumbers, utilities and other trades in mind, Milwaukee auger bits are impact-rated, so they're strong enough for a variety of applications. The double wing spurs continually scribe the hole, producing smooth holes without breakout. The polished and coated flute finish means chips won't stick, eliminating time-consuming stops to clean the bit. Benefits Durable: Hardened, one-face 20° rake angle design enhances nail resistance, chip removal and fast, easy sharpening Fast chip removal: Nonstick, polished and coated flutes eliminate costly cleaning time Impact-rated shank: Strong enough to use with an impact wrench Versatile: One line of Milwaukee® auger bits covers all applications and tools Technical Information Diameter: 3/4'' Shank: 7/16" Flute Length: 4" Style: Spur Auger Length: 6-1/2"
    • In stock
    • Eligible for free shipping
  • Klein Tools Adjustable Hole Saw with Auto-Set Arms, Model 53710
    $49.98

    Klein Tools Adjustable Hole Saw with Auto-Set Arms, Model 53710

    Klein Tools
    Description The Klein Tools Adjustable Hole Saw with Auto-Set Arms offers quick and precise hole cutting from 2 to 7-Inch (5.1 to 17.8 cm) in drywall and ceiling tile. It features an integrated gearing mechanism for fast, simultaneous size adjustment and to ensure your pilot bit is always centered for clean cuts. The spring-loaded collar ensures controlled cuts, while the durable polypropylene dust bowl with integrated vacuum port allows for effective debris containment and effortless cleanup. Features Hole Saw quickly and smoothly cuts holes from 2 to 7-Inch (5.1 to 17.8 cm) in drywall and ceiling tile Easy to adjust increments of 1/4-Inch (0.6 cm) with an integrated gearing mechanism ensuring pilot bit is always centered Spring loaded collar dissipates pressure and helps to keep the mechanism perpendicular to cutting surface for controlled cuts Integrated vacuum port accommodates 3 of the most common vacuum hose sizes for on the spot cleanup, perfect for finished workspaces Durable polypropylene dust bowl keeps drywall debris contained No additional tools needed to adjust the hole saw; arms dual-adjust for size Can be used in a drill or impact Replacement blades and bit available (Cat. No. 53701) Technical Information Type: Adjustable Hole Saw and Dust Bowl with Integrated Vacuum Port Application: Quickly and Smoothly Cut Cleaner Holes in Drywall and Ceiling Tiles Special Features: Auto-Adjust Gear; Spring Loaded Collar; Integrated Vacuum Port Overall Length: Assembled: 10'' (25.4 cm) Overall Height: Assembled: 6.1'' (15.5 cm) Overall Width: Assembled: 10'' (25.4 cm) Material: Dust Bowl: Polypropylene Range: 2'' to 7'' (5.1 to 17.8 cm) Hole Diameter: 2'' to 7'' (5.1 to 17.8 cm) Maximum Cutting Depth: 5/8'' Drywall and Ceiling Tile Weight: 1.1 lb (0.5 kg) Document Brochure
    • Low stock
    • Eligible for free shipping
  • Milwaukee 5pcs Sawzall Blade Kit, Model 49-22-3305
    Out of Stock
    $25.17

    Milwaukee 5pcs Sawzall Blade Kit, Model 49-22-3305

    Milwaukee
    Description The Milwaukee 5 piece Demolition Sawzall blade set features an assortment of the most popular demolition blades for a broad range of professional applications. Milwaukee demolition blades are thicker for maximum durability and taller for straighter cuts. The set features The Ax for cutting nail embedded wood, The Wrecker for multi-material demolition cutting, and The Torch for metal cutting. Benefits The Ax wood cutting Sawzall blades feature FANG TIP and NAIL GUARD The Torch metal cutting blades feature GRID IRON and TOUGH NECK Demolition blades are thicker for maximum durability 1 inch tall profile for tough, straight cuts Optimized tooth design providing longer life than standard bi-metal blades Includes metal and wood cutting blades Kit Includes (1) 9-inch 5 TPI the AX demolition wood blade, (1) 9-inch 14 TPI the torch demolition metal blade, (1) 9-inch 7/11 TPI the wrecker demolition multi-material blade (1) 6-inch 14 TPI the torch demolition metal blade (1) 6-inch 18 TPI the torch demolition metal blade Technical Information Accessory Type: Blades Blade Material: Bi-Metal Certified: Yes Ideally Used With: Reciprocating Saws Individual/Set: Set Material Application: Multi-Purpose Number of Pieces in Set: 5 Power Tool Accessory Features: Universal Power Tool Accessory Type: Reciprocating Saw Blades Teeth Per Inch: 14, 5, 18
    • Temporarily out of stock
    • Notify me when back in stock
  • Klein Tools Replacement Hole Cutter Pilot Bit, Model 31874*
    Special Order Item
    $9.99

    Klein Tools Replacement Hole Cutter Pilot Bit, Model 31874*

    Klein Tools
    Description This replacement hole cutter pilot bit cuts quick, precise holes in a variety of materials. Smooth start bit provides greater control. The replacement bit works with Klein carbide hole cutter products. Features Cuts quick, precise holes in stainless steel, mild steel, iron, copper and brass sheet up to 3/16-Inch (5 mm) thick Split point pilot drill bit prevents bit walking Integrated flange prevents the operator from drilling beyond the sheet metal For use with Klein carbide hole cutter products Technical Information Type: Hole Cutter Pilot Bit Application: Cuts Holes in Stainless Steel, Mild Steel, Iron, Copper and Brass Sheet up to 3/16'' (0.5 cm) Thick Special Features: Split Point Pilot Drill Bit (118°) and Integrated Flange Overall Length: 1.96'' (5 cm) Material: High Speed Steel Tip Size: 5/32'' (0.4 cm) Tip Type: Split Point Pilot Drill Bit Shank Size: 0 .234'' (0.6 cm)
    • Available for special order