Test Equipment

Description The Klein Tools ET450 Advanced Circuit Tracer Kit is a professional tracer for energized and non-energized breakers, fuses, and wires. When the Transmitter is connected to a circuit, the Receiver’s sensitivity can easily be adjusted to detect the transmitted signal on breakers, fuses, and wire through drywall, cement block, and underground. Kit comes with transmitter, receiver, blade and ground prongs, alligator clips, 3-Foot and 20-Foot lead adapters, AC plug leads, instructions, all required batteries, and a hard carrying case with handle for convenient transportation and storage. Benefits The Advanced Circuit Tracer Kit provides reliable tracing of energized or non-energized breakers, fuses, and wires Easily adjust receiver sensitivity level to detect the transmitted signal through drywall, cement block, and underground Versatile applications include tracing wires, conduit or pipes, or a single wire in a bundle Audible beep and visual indicators on receiver denotes signal strength Receiver features a flashlight for illumination in low-light areas and NCV function to test if wires are energized Transmitter has AC/DC external voltage indicators of 12V, 48V, 120V, 240V, and 480V Kit comes with transmitter, receiver, blade and ground prongs, alligator clips, 3-Foot and 20-Foot lead adapters, AC plug leads, instructions, all required batteries, and a hard carrying case Technical Information Type: Circuit Tracer Application: Trace Energized and Non-Energized Breakers, Fuses, and Wires Special Features: Flashlight and NCV Function on Receiver; Accessories, and Hard Case Material: ABS and Electronic Components Batteries: Transmitter: 6 × 1.5V AA Alkaline; Receiver: 4 × 1.5V AA Alkaline Battery Life: Up to 24 hr Drop Protection: 6' (2 m) Display: Receiver: LCD with Backlight Control Type: Transmitter and Receiver Voltage: External Indicators for 12V, 48V, 120V, 240V, and 480V Frequency: Transmitter: AC 45Hz to 65Hz; Receiver: 33kHz Ingress Protection: IP42 Pollution Degree: 2 Tests Continuity: No Integral Lead Storage: No Interchangeable Leads: Yes Lead Length: 3' (1 m) and 20' (6.1 m) Standard: CAT III 600V Case Included: Yes Included: Transmitter, Receiver, Blade and Ground Prongs, Alligator Clips, 3' and 20' Lead Adapters, AC Plug Leads, Instructions, All Required Batteries, and Hard Carrying Case Overall Length: Receiver: 7.05'' (17.9 cm); Transmitter: 8.72'' (22.2 cm) Overall Height: Receiver: 1.84'' (4.5 cm); Transmitter: 1.51'' (3.9 cm) Overall Width: Receiver: 3.90'' (9.9 cm); Transmitter: 2.07'' (5.3 cm) Weight: Transmitter: 16.5 oz (470 g); Receiver: 11 oz (312 g) Document Brochure Instructions

Description The Klein Tools circuit breaker kit allows your circuit breaker finder to do more than just indicate standard circuits. Adapters in this kit indicate the correct breaker of bare wires or other exposed conductors. Adapters also indicate the correct breaker for light fixtures. Benefits For use with ET300 and ET310 Digital Circuit Breaker Finder Light socket adapter for finding the correct circuit of a lighting fixture Alligator clip adapter enables use on bare wires Includes standard 3-prong to 2-prong grounding adapter Documents Digital Circuit Breaker Finder Brochure

Description The Klein Tools ET310 is a digital circuit breaker finder used to locate the correct circuit breaker in a panel to which an electrical outlet or fixture is connected. The Transmitter is connected to the electrical outlet or fixture in the circuit while the receiver is used to scan the breakers in the circuit panel. The Transmitter also features a GFCI outlet tester. Benefits Quickly and accurately locate the correct circuit breaker in a panel corresponding to the circuit to which an electrical outlet or fixture is connected Tester consists of two parts: a Transmitter, connected to the electrical outlet or fixture and a Receiver, used to scan the panel to locate the correct breaker Receiver delivers clear visual and audible indications when the correct breaker has been located Operates on 90-120V AC circuits Transmitter incorporates a GFCI outlet tester to inspect the wiring condition at the electrical outlet and test GFCI devices Transmitter docks in the Receiver for convenient storage as a single item when the tester is not in use Transmitter incorporates a three-pin plug for connecting to North-American-style grounded electrical outlets. Receiver powers off automatically after approximately three minutes of non-use to conserve battery life Transmitter is powered by the circuit when connected to the electrical outlet or fixture Low battery indicator Easily accessible battery compartment. Uses one 9V battery in the receiver only; Transmitter does not require a battery Built to withstand a 6.6-foot (2 m) drop CAT II 120V safety rating Measurement Category II is applicable to test and measuring circuits connected directly to utilization points (socket outlets and similar points) of the low-voltage MAINS installation Includes Transmitter, Receiver, user manual, and 9V battery (for Receiver) The transmitter may be connected to other electrical fixtures using optional accessories which are sold separately Technical Information Type: Electronic Tester Application: Locate Circuit Breakers in Panel, Test GFCI Devices Features: Transmitter docks in Receiver Transmitter integrated GFCI outlet tester in receiver Overall Length: 10.96'' (27.8 cm) (With Transmitter docked in Receiver) Overall Height: 2.16'' (5.5 cm) (With Transmitter docked in Receiver) Overall Width: 1.39'' (3.5 cm) (With Transmitter docked in Receiver) Material: PC & PC-ABS housing and electronic components Standard: CATII 120V Weight: 7.2 oz. (204 g) Documents ET310- Digital Circuit Breaker Finder Specification sheet Digital Circuit Breaker Finder with GFCI Outlet Tester Instruction Manual

Description The NCVT5KIT includes a dual-range non-contact voltage tester with laser pointer and a GFCI receptacle tester. The NCVT-5A automatically detects and indicates voltage (12 - 1000V) allowing broad application. The RT210 will troubleshoot the most common wiring problems in standard and GFCI receptacles. Benefits NCVT-5A provides non-contact determination of AC voltage in cables, cords, circuit breakers, switches, outlets and wires, as well as AC voltage in security, entertainment, communications, environmental control and irrigation systems Dual-range testing: select 12 to 1000V AC which is perfect for low voltage systems such as doorbells, environmental control or irrigation systems, or select 70 to 1000V AC which is perfect for detecting systems such as electrical mains supply NCVT-5A delivers simultaneous visual and audible voltage indicators when AC voltage is detected Audible voltage indicator beeps at a greater frequency the higher the voltage that is sensed, or the closer to the voltage source it is Bright integrated laser pointer for identifying objects of interest at distance on the jobsite RT210 detects the most common wiring problems in standard and GFCI receptacles Works on GFCI outlets and confirms operation of the ground fault protective device Conditions the RT210 indicates: open ground, reverse polarity, open hot, open neutral, hot/ground reversed Technical Information Type: Non-Contact AC Voltage Tester, GFCI Receptacle Tester Application: Dual-Range Non-contact Detection of the Presence of AC Voltage from 12-1000 VAC or from 70-1000V AC Special Features: Integrated High Strength Red Laser Pointer, Dual Range Tester (70-1000V; 12V-1000V) AC Voltage Detection, Simultaneous Visual and Audible Voltage Indicators in the Presence of AC Voltage; US Patent No. D750985 Material: Plastic and Electronic Assemblies Drop Protection: 9.8' (3 m) Voltage: 12 to 1000 VAC Frequency: 50 to 500 Hz Pollution Degree: 2 Standard: CAT IV 1000V; Laser: Class 3a, 630-670nm, Max Power <5mW Included: NCVT-5A with Batteries, RT210 Batteries: 2 x AAA Battery Life: Laser On: 31 Hrs; NCV On with Visual and Audible Alerts: 25 Hrs Overall Length: 6'' (15.2 cm) Overall Height: 0.96'' (2.4 cm) Overall Width: 1.16'' (2.9 cm) Weight: 1.5 oz (43 g) Documents Non-Contact AC Voltage Tester Brochure Non-Contact AC Voltage Tester Instruction Manual GFCI Receptacle Tester Specification sheet

Description This kit includes the tools necessary to tone and trace wires in common wiring systems. This premium tone generator has Angled Bed of Nails (ABN) clips that securely grip the cable. Tone Generator emits five distinct tones. An RJ11 plug easily connects to telephone or RJ45 data jacks for toning. The toner, also checks continuity and polarity that are indicated by clearly labeled LEDs. The probe traces with the tones signal. The adjustable-volume speaker amplifies the tone. The 3.5 mm jack allows for headphones (sold separately) to be attached in noisy environments. The probe has a tool-less non-metallic durable replaceable tip. The probe enables testing in distribution blocks without disturbing other services. Benefits Includes a professional grade tone generator and tracing probe for non-active wiring Toner-Pro features 5 distinct tone cadences, transmits 1,000+ feet Rugged Angled Bed of Nails (ABN) clips securely attach to wires RJ11 plug easily connects to telephone and RJ45 data jacks to tone wire pair Toner-Pro tests for continuity and polarity with results indicated by clearly labeled LEDs Probe-Pro features 3.5 mm headphone jack for noisy environments (headphones not included) Responsive probe with durable non-metallic, replaceable conductive tip (VDV999-068) - sold separately Work light on probe tip for use in dark spaces Terminal block on probe to confirm the toned pair Each tool includes 4X AAA batteries Custom, padded, divided, zipper pouch for convenient storage (VDV770-500) included with kit Technical Information Brochure Instruction Manual Type: Tone Generator Tracing Probe Application: Wire Toning & Tracing Special Features: Angled Bed of Nails with (ABN) Clips, 5 Distinct Cadences, Worklight Overall Length: 7'' (17.8 cm) Overall Height: 12'' (30.5 cm) Overall Width: 3'' (7.6 cm) Material: Plastics, Metal, PCB Boards and LEDs Batteries: 8 x AAA Included: Probe-Pro Tracing Probe (No. VDV500-123); Toner-Pro Tone Generator (No. VDV500-063); Pouch (No. VDV770-500), 8 x AAA Batteries Weight: 13.1 oz (0.37 kg)

Description The RT250 is an electrical receptacle tester that tests the wiring conditions at an electrical outlet and inspects GFCI devices. The LCD displays the voltage, identifies the wiring fault, and the time required to trip a GFCI device. It is designated for use with North American 3-wire 120V electrical outlets. Benefits GFCI Receptacle Tester features a large backlit LCD readout of voltage and clear indication of wiring conditions LCD readout shows the time required to trip a GFCI device Detect and identify common wiring faults Patent pending detection of Open Neutral Open Ground wiring fault Auto-Hold is convenient for hard-to-reach outlets Bright green and red LEDs illuminate for visual indicators CAT II 135V safety rating Durable 6.6-Foot (2 m) drop protection For use on 3-wire, North American 120V electrical outlets only Technical Information Type: GFCI Receptacle Tester Application: Detects and Identifies Common Wiring Problems in GFCI Receptacles Special Features: Large LCD Display; Patent Pending Detection of Open Neutral Open Ground Wiring Fault; Shows Amount of Time it Takes to Trip GFCI Material: ABS and Electrical Components Drop Protection: 6.6' (2 m) AFCI: No GFCI: Yes, Including Time to Trip Device Voltage: 135V AC Batteries: 2 x AAA Included: 2 x 1.5V AAA Alkaline Batteries and Manual Standard: CAT II 135V Safety Rating Overall Length: 4.5'' (11.4 cm) Overall Height: 1.1'' ( 27.9 cm) Overall Width: 2'' (5.1 cm) Weight: 4.8 oz (136 g) Document Brochure Instructions Safety Data Sheet

Description Klein Tools IR1 is an infrared thermometer with a targeting laser. It has a wide measurement range of -4 to 752°-Degree Fahrenheit (-20 to 400-Degree Celsius) and a 10:1 distance-to-spot ratio. The backlit display provides clear readings. Benefits Infrared Thermometer has an optical resolution (distance-to-spot) of 10:1 Features include targeting laser; automatic hold; backlit display; low battery, auto power-off Drop protection to 6.6-Foot (2 m) Measurement range is -4 to 752-Degree Fahrenheit (-20 to 400-Degree Celsius) Not a medical device; thermometer is NOT intended for use on people or animals Fixed emissivity at 0.95 Includes custom pouch and a 9V battery ''Auto Power-Off'' conserves and extends battery life Certified to IEC EN 61326-1.2006, EN608251.1994+A2.2001+A1.2002 Technical Information Type: Infrared Thermometer with Targeting Laser Application: Accurate Targeting and Temperature Measurement Special Features: Target Laser Material: Plastic Housing, Electronic Components Batteries: 1 x 9V Distance to Spot: 10:1 Accuracy: Above freezing: ±4° F or ±2%; Accuracy Below Freezing: ±4° F Plus 0.2 Degrees Per Degree Below 32° F Display: Digital Backlit Display Resolution: 0.1F (0.1 C) Response Time: < 0.25s Degree Format: F or C Range: -4° to 752° F (-20° to 400° C) Standard: EN 61326-1:2013, EN 608251:2014, 21 CFR 1040.10 and 1040.11, Class II Laser, CE Drop Protection: 6.6 ft (2 m) Included: Custom Pouch and 1 x 9V Battery Overall Length: 6.01'' (15.3 cm) Overall Width: 1.24'' (3.1 cm) Overall Height: 4.14'' (10.5 cm) Weight: 7.1 oz (201 g) Documents Brochure Instruction Manual

Description The Klein Tools NCVT-5A is a dual-range non-contact voltage tester (NCVT) with integrated laser pointer. The tester can be set to detect voltage from 70 to 1000V AC (Mode 1) or from 12 to 1000V AC (Mode 2). High pitched audible alerts beep at greater frequency as higher voltage is sensed, or proximity to the voltage source gets closer. The laser pointer can function independent of or simultaneously with the NCVT. CAT IV 1000V safety rating. Benefits Voltage Tester provides non-contact determination of AC voltage in cables, cords, circuit breakers, switches, outlets and wires, as well as AC voltage in security, entertainment, communications, environmental control and irrigation systems Dual-range testing: select 12 to 1000V AC which is perfect for low voltage systems such as doorbells, environmental control or irrigation systems, or select 70 to 1000V AC which is perfect for detecting systems such as electrical mains supply Bright integrated laser pointer for identifying objects of interest at distance on the jobsite Simple to use intuitive interface is easy to change between voltage detection ranges and easy to determine the currently active range Delivers simultaneous visual and audible voltage indicators when AC voltage is detected Audible voltage indicator beeps at a greater frequency the higher the voltage that is sensed, or the closer to the voltage source Built to withstand a 9.9-Foot / 3-meter drop ''Auto Power-Off'' conserves battery life Screw-thread battery cap Lightweight, compact tool with pocket clip provides convenient storage and quick access CAT IV 1000V safety rating US Patent No. D750985 Technical Information Type: Non-Contact Voltage Tester Application: Dual-Range Non-contact Detection of the Presence of AC Voltage from 12-1000 VAC or from 70-1000V AC Special Features: Integrated High Strength Red Laser Pointer, Dual Range Tester (70-1000V; 12V-1000V) AC Voltage Detection, Simultaneous Visual and Audible Voltage Indicators in the Presence of AC Voltage; US Patent No. D750985 Material: Plastic and Electronic Assemblies Drop Protection: 9.8' (3 m) Voltage: 12 to 1000 VAC Frequency: 50 to 500 Hz Pollution Degree: 2 Standard: CAT IV 1000V; Laser: Class IIIa, 630-670nm, Max Power <5mW Included: Batteries Batteries: 2 x AAA Battery Life: Laser On: 31 Hrs; NCV On with Visual and Audible Alerts: 25 Hrs Overall Length: 6'' (15.2 cm) Overall Height: 0.96'' (2.4 cm) Overall Width: 1.16'' (2.9 cm) Weight: 1.5 oz (43 g) Document Brochure Instructions

Description Klein Tools Premium Electrical Test Kit includes a Manual-Ranging Digital Multimeter (Cat. No. MM320) with right-angle test leads, Dual Range Non-Contact Voltage Tester with Flashlight, 12 to1000 VAC (Cat. No. NCVT3P), and a GFCI Receptacle Tester with LCD (Cat. No. RT250). This convenient kit features products for a variety of applications with safety and reliability in mind. Comes with all required batteries. Features Electrical Kit with Premium Testers solve various electrical applications; Manual-Ranging Digital Multimeter, Dual Range Non-Contact Voltage Tester with Flashlight, and GFCI Receptacle Tester with LCD Digital Multimeter MM320 measures up to 600V AC/DC voltage, 10A DC current and 2MOhms resistance; also tests batteries, diodes, and continuity Voltage Tester NCVT3P has dual-range capabilities to detect from 12 to 1000 VAC or 70 to 1000 VAC for a broad variety of low-voltage or standard voltage applications Bright flashlight illuminates work area and may be used independent of voltage detection function GFCI Receptacle Tester RT250 features a large backlit LCD readout of voltage, and clear indication of wiring conditions, including patent pending detection of Open Neutral / Open Ground wiring faults LCD readout on receptacle tester shows the time required to trip a GFCI device; for use on 3-wire, North American 120V electrical outlets only Digital Multimeter MM320 includes right-angle test leads and all required batteries MM320 is CAT III safety rated for 600V Technical Information Type: Electrical Test Kit Application: Multimeter Measures up to 600V AC/DC Voltage, 10A DC Current and 2MΩ Resistance. Tests Batteries, Diodes, and Continuity Special Features: Auto Power-Off on MM320 Multimeter Material: ABS/Electronics Batteries: MM320: 2 x AAA Drop Protection: MM320: 3.3' (1 m) Display: MM320: 2000 Count LCD Functions: Hold Voltage: MM320: 600V AC/DC Current: 10A Ohms (Resistance): 2MΩ Standard: MM320: CAT III 600V; CE; UKCA Included: MM320 Manual-Ranging Digital Multimeter with Right-angle Test Leads; NCVT3P Dual Range Non-Contact Voltage Tester with Flashlight; RT250 GFCI Receptacle Tester with LCD; Instructions; and All Required Batteries Overall Length: 6.39'' (162.4 cm) Overall Height: 1.80'' (45.7 cm) Overall Width: 3.12'' (79.4 cm) Weight: 8.2 oz (231 g) Document RT250 Instructions NCVT-3P Instructions MM320 Instructions

Description The Tone & Probe Test and Trace Kit provides simple toning and tracing of non-energized wire. The easy-to-use tone generator traces wire when used with the included probe. Alligator clips are provided for unterminated wires and an RJ45 to RJ45 cable to tone or test data cables. The responsive probe is a tone tracer with a durable, non-metallic, conductive tip, a speaker with audible output and headphone jacks for use in noisy environments (headphones not included). The worklight on the probe illuminates dark spaces. The toner and probe together perform pin to pin wire map test. Benefits Simple tone generator and wire tracing probe for non-active wire runs Responsive probe with durable, non-metallic, conductive tip Alligator clips for unterminated wires RJ45 to RJ45 test cable Toner and probe together perform pin to pin wire map test Work light on probe tip for use in dark spaces Adjustable volume control AAA batteries (included) Headphone jack for noisy environments (headphones not included) Technical Information Type: Tone Generator Tracing Probe Application: Wire Toning and Tracing Special Features: Alligator Clips, RJ11 Plug, RJ45 to RJ45 Test Cable Overall Length: 10.6'' (26.9 cm) Overall Height: 1.6'' (4.1 cm) Overall Width: 6.9'' (17.5 cm) Material: ABS Batteries: 4 x AAA Included: RJ45 Cable, RJ12 and Alligator Clip Cable, Batteries Standard: REACH, RoHS3, CE-EMC Weight: 10.1 oz (286 g) Documents Brochure Instruction Manual

Description The Klein Tools 69409 Line Splitter separates hot from neutral and ground wires on standard 120-Volt outlets so that current measurements can be made with a current clamp. Without the Line Splitter, the current clamp measures the load current going in both directions, effectively cancelling the measurement. The Line Splitter has a standard measurement section and ten-times multiplier section for use with less accurate or higher ranged clamp meters. It was designed for use with Klein Tools clamp meters but will also function with many other manufacturers' clamp meters. Benefits Allows the measuring of current draw up to 15A without splitting the load's power cord For use with all Klein clamp meters Can be used to perform voltage checks with standard multimeter probes Provides 10X measurement mode For North American-style outlets only Technical Information Application: Use with Klein Clamp Meters Special Features: Measures up to 15A Overall Length: 4.67'' (11.9 cm) Overall Height: 4.67'' (11.9 cm) Overall Width: 2.28'' (5.8 cm) Drop Protection: 3.3' (1 m) Documents Instruction

Description Klein Tools ET250 is a solid-state, digital voltage and continuity tester. It measures AC/DC voltages up to 600V and tests for continuity. Additionally, the ET250 tests GFCI protected circuits to verify that the GFCI device is functioning appropriately. The tester includes a backlight and integrated flashlight for working in reduced ambient lighting conditions. Benefits Automatically selects voltage or continuity; automatically powers on when any measurement is attempted Backlit LCD display CAT IV 600V modern solid-state design for safety Tests GFCI protected circuits Uses standard replaceable multimeter test leads Features built-in test lead holders on the back of the meter Integrated flashlight 9.8 ft. (3 m) drop protection IP53 dust and water-resistant Technical Information Brand: Klein Tools Type: Digital Voltage and Continuity Tester Features: Built-in Test Lead Holder and Integrated Flashlight Material: Thermoplastic; Electronics Batteries: 3 x AAA Drop Protection: 9-27/32 ft (3m) Display: Digital LCD Control Type: Digital Voltage: 2 to 600V AC/DC Frequency: 45 to 400 Hz Ingress Protection: IP53 (except test lead jacks) Pollution Degree: 2 Tests Continuity: Yes Integral Lead Storage: Yes Standard: CAT IV 600V, CE Included: Test Leads, Batteries Overall Length: 6.06'' (154.0 mm) Overall Height: 1.64'' (41.7 mm) Overall Width: 2.31'' (58.8 mm) Documents Specification sheet Instruction Manual

Description Klein Tools CL800 is an automatically ranging true root mean squared (TRMS) digital clamp meter that measures AC/DC voltage, resistance, continuity, frequency, capacitance, and test diodes via test-leads, and temperature via a thermocouple probe. It also features a Low Impedance (LoZ) mode for identifying and eliminating ghost or stray voltages. Benefits Automatically ranging true mean squared (TRMS) technology for increased accuracy Test leads measure AC/DC voltage, resistance, continuity, frequency and capacitance and tests diodes Thermocouple probe measures temperature Low Impedance (LoZ) mode for identifying and eliminating ghost or stray voltages CAT IV 600V, CAT III 1000V, Class 2, Double insulation safety rating Built to withstand a 6.6-foot (2m) drop Low battery indicator and easily accessible battery compartment Operating temp: 32-degree F to 104-degree F (0-degree C to 40-degree C) Operating altitude to 6562-Foot (2000m) Meets requirements for use in basic and controlled electromagnetic environments like residential, office and light-industrial locations Included: Carrying Case, 41'' (1041.4 mm) Test Leads, Thermocouple with Adapter, and Batteries Technical Information Application: Measures Current Features: Features Low Battery Indicator and Auto Shut Off Batteries: 2 x AAA Jaw Size: 1.38'' (3.5 cm) Drop Protection: 6.6' (2 m) Display: 6000 Count LCD Functions: Test leads measure AC/DC voltage, resistance, continuity, frequency and capacitance, and test diodes. Thermocouple probe measures temperature. Voltage: 1000V AC; 1000V DC Frequency: 1Hz - 500 KHz Current: 600A AC; 600A DC Capacitance: 6000µF Ohms (Resistance): 60MO Temperature Range: -14° - 1000°F (-26° - 538°C) Ingress Protection: IP40 Standard: CAT IV 600V; CE Certified Overall Length: 9.09'' (23.1 cm) Overall Height: 1.55'' (3.9 cm) Overall Width: 3.81'' (9.7 cm) Weight: 12.5 oz (354 g) Documents CL800 - Digital Clamp Meter Instruction Manual Klein Tools CL800 Catalog

Description The Ferret Plus brings you the ultimate innovation in inspection technology. Includes built-in (on board) memory and the first ever non-contact voltage detector that is not handheld to help detect live cables from a greater reach than ever before. Perfect for someone who loves having the latest technology to work easier, faster & safer. Suitable for electricians, plumbers, builders, HVAC, lighting installers + more. The new premium Ferret Plus incorporates all of the design and innovation of the original award-winning Ferret with the addition of new technology to provide even greater functionality and usability than ever before. Uses: Visual inspections. Light cable installations. Inspect for maintenance and repair work on the job or at home. Very fast and easy to turn on and link to your phone so perfect for a quick look. Record photos and videos direct to your phone’s photo gallery. Features Built-in WiFi hotspot, wireless & rechargeable – Provides a high-resolution live stream with a wireless range of up to 50′ (15m). Built-in rechargeable battery. IP67 dustproof & waterproof. Free & easy to use App – Easy to use, intuitive Free Ferret App allows control over the camera. 720p HD streaming – Crisp clear images with 720p high resolution provides real time photos & video directly to a smart device. Adjustable bright white LEDs – Easily glides into confined dark crawl spaces. Bright white LEDs help investigate, locate, diagnose & fix problems. Digital zoom function – View objects closer with the Ferret App digital zoom. NEW Ferret always up viewing mode – In the Ferret App setting screen select to have the image view either normal mode or always up mode. NEW App controlled variable focus – Focus down as close as 2.5″ (6cm) to see fine detail. Focus out to infinity for extra clarity. NEW Super fast charge – Charge Ferret from flat to 95% charged in only 1 hour. NEW Built-in (on board) memory – 8GB memory on-board, to provide many hours of recording even when out of WiFi range. NEW Non-contact voltage detector – The world’s first non-contact voltage detector that’s not limited by the reach of your arm. Technical Information Model: CFWF50P Dimensions: 3-1/5"L x 1-1/4"W (80mm x 32mm) Weight: 1-1/6 ounces (33g) Camera Resolution: 720p HD Wireless Range: Up to 50' (15m) Line of sight Operating Time: Up to 90 minutes (LEDs on medium brightness setting) Charge Up Time: ~80 minutes (95% charged in 60 minutes) Frequency: 2.4GHz Operating Voltage: 5V DC Operating Temperature: 32°F to 95°F (0°C to 35°C) Storage Temperature: -4°F to 113°F (-20°C to 45°C) Non Contact Voltage Detector Sensor Range: 50V-1000V AC (Approx.) Kit Includes 1x Padded EVA case 1x Ferret Plus camera 1x Flexible gooseneck 1x Short rod; strong hook and magnet 1x Right angle adaptor 1x Thread adaptors 1x USB-C charge cable 1x Spare O-rings 1x Instruction manual. Documents Brochure Ferret Plus Information Sheet Configuration Guide Instruction Manual

Description The ET600 is a multi-function Megohmmeter capable of producing 125V, 250V, 500V, and 1000V test voltages for insulation resistance measurements up to 4000MΩ. Also tests AC/DC voltages up to 1000V with automatic ranging True RMS technology. Convenient lock function and built-in stand for hands free operation. Dual-function backlit display monitors process. Benefits Voltage Tester tests insulation resistance up to 4000MΩ at 125V, 250V, 500V, and 1000V DC Megohmmeter with test and lock buttons for simple insulation testing Warning alarm and high voltage icon for detection of voltage Measures up to 1000V AC/DC, resistance, and continuity Automatic ranging True Root Mean Square (TRMS) technology for increased accuracy Backlit display with bar graph, Auto-power off, High Voltage, Max/Min, and Hold icons Low battery indicator with easily replaceable battery and fuse Built-in stand and optional magnetic hanger for hands free operation Test verification of conformity to EN61557-1,-2,-4 CAT IV 600V and CAT III 1000V safety rating Includes Right Angle Test Leads and Heavy-Duty Alligator Clip Test Leads Technical Information Type: Insulation Resistance Tester Application: Installation, Troubleshooting, and Preventive Maintenance of Electrical Wiring and Electrical Equipment, Measures 1000V AC/DC, Resistance, and Continuity Special Features: Lock Button for Insulation Resistance Testing Material: ABS, Polycarbonate, Electrical Components Batteries: 6 x AA Display: 4000 Count LCD Color: Orange/Black Functions: Insulation Resistance, Voltage AC/DC, Resistance, and Continuity Voltage: 125V, 250V, 500V, and 1000V DC; 1000V AC/DC Ohms (Resistance): 4000MΩ Standard: CAT IV 600V/CAT III 1000V, EN61557-1, EN61557-2, EN61557-4 Included: CAT III/CAT IV Safety Rated Test Leads, Heavy-duty Alligator Clip Test Leads, Batteries, Carrying Case, and Instruction Manual Overall Length: 7.93'' (20.2 cm) Overall Height: 2.32'' (5.9 cm) Overall Width: 3.59'' (9.1 cm) Weight: 1.4 lb (0.6 kg) Document Brochure Instructions

Description The CL120VP Electrical Test Kit from Klein Tools is designed with optimum reliability and safety in mind. Kit comes with 1 meter and 3 testers for a variety of applications and all stored within a convenient padded pouch. The CL120 is an AC auto-ranging 400 Amp AC/DC digital clamp meter. The RT210 Receptacle Tester detects common wiring problems for Standard and GFCI AC electrical outlets. The NCVT-3P is a dual range non-contact tester with flashlight for a broad variety of voltage applications from 12 to 1000V AC or 70 to 1000V AC. Test AC and DC voltage at four commonly used ranges with the ET40 Voltage Tester. Features CL120 Clamp Meter measure AC current via the clamp, and AC/DC voltage, resistance and continuity via test leads Meter has backlit LCD for ease of viewing in low light and is CAT III 600V, Class 2 Double Insulated RT210 detects the most common wiring problems in standard and GFCI receptacles A convenient chart on RT210 helps determine wiring conditions: open ground, reverse polarity, open hot, open neutral, and hot/ground reversed NCVT-3P has dual-range capabilities to detect from 12 to 1000V AC or 70 to 1000V AC for a broad variety of low-voltage or standard voltage applications Bright flashlight illuminates work area and may be used independent of NCVT-3P voltage detection function ET40 tests AC voltages from 12V to 240V AC at four useful levels aligned with commonly used residential voltages ET40 also tests DC voltages from 1.5V to greater than 17V to 24V at four common levels Technical Information Type: Auto Ranging Clamp Application: Testing and Measuring Voltage Special Features: Clamp Meter is Automatic Ranging for Measurement and has NCVT feature Overall Length: 8.5'' (21.5 cm) Overall Height: 1.5'' (3.8 cm) Overall Width: 3.5'' (8.9 cm) Material: ABS/Electronics Batteries: CL120: 3 x AAA; NCVT3-P: 2 x AAA; ET40: 2 x AAA Jaw Size: 1.6'' (4.1 cm) Drop Protection: 6.6' (2 m) Display: 2000 Count Backlit LCD Functions: AC Current, NCVT, AC/DC Voltage, Resistance and Continuity Voltage: 600V AC/DC Pollution Degree: 2 Standard: CATIII 600V, Class 2, Double Insulation Safety Rating, CE Certified Included: CL120 Digital Clamp Meter with Test Leads; NCVT3P Dual Range Non-Contact Voltage Tester with Flashlight; ET40 Electronic AC/DC Voltage Tester; RT210 GFCI Receptacle Tester; Carrying Case; Instructions; and All Required Batteries Weight: 11 oz (314 g) Document CL120VP Brochure NCVT-3P Brochure Clamp Meter Selection Guide CL120 Manual NCVT-3P Manual ET40 and RT210 Manual

Description Klein Tools MM420 Multimeter is an auto-ranging, true root mean square (TRMS) multimeter that measures AC/DC voltage, AC/DC current, and resistance. It can also measure temperature, capacitance, frequency, duty-cycle, and test diodes and continuity. Klein Tools’ Test and Measurement product line was exclusively designed from the ground up by electricians for electricians. Years of field research, combined with extensive input from electricians across America, inspired the development of meters and electrical testers loaded with innovative, time-saving features. Features Multimeter with automatic ranging true root mean square (TRMS) technology for increased accuracy Measures up to 600V AC/DC voltage, 10A AC/DC current and 50 MOhms resistance, continuity, temperature, capacitance, frequency, duty-cycle, and test diodes Lead Alert protection with LED illumination for lead placement and an easy-to-view backlit display Low battery indicator and easily accessible battery and fuse compartment Durable meter built to withstand a 6.6-Foot (2 m) drop Includes test leads, thermocouple with adapter, batteries and user manual CAT III 600V safety rating For use in basic and controlled electromagnetic environments such as residential, business and light-industrial locations Technical Information Type: Digital Multimeter Application: Testing and Measuring Voltage Special Features: Lead-Alert; Auto-Range; Min/Max Measurements; Backlight; Auto Power-Off; Data-Hold Material: ABS, Electrical Components Batteries: 2 x AAA Drop Protection: 6.6' (2 m) Display: 4000 Count LCD Color: Orange/Black Functions: Measures up to 600V AC/DC Voltage, 10A AC/DC Current and 50MΩ Resistance. Measures Temperature, Capacitance, Frequency, Duty-Cycle, and Test Diodes and Continuity Voltage: 600V AC/DC Frequency: 1 Hz - 50 KHz Current: 10A AC/DC Capacitance: 400 µF Ohms (Resistance): 50MΩ Standard: CAT III 600V; CE and UKCA Certified Temperature Range: -40° to 1832°F (-40° to 1000°C) Included: Test Leads, Batteries, Thermocouple, and User Manual Overall Length: 6'' (15.2 cm) Overall Height: 1.78'' (4.5 cm) Overall Width: 3.16'' (8 cm) Weight: 8.2 oz (231 g) Document Multimeter Selection Guide Instruction Manual

Description Klein Tools NCVT-3P Non-contact Voltage Tester is a volt pen with an integrated flashlight. The voltage sensor detects 12-1,000V AC and indicates the presence of voltage in cables, cords, circuit breakers, light fixtures, switches, outlets and wires as well as AC voltage in doorbells, thermostats, low voltage lighting and irrigation systems. Includes both visual and audible signals. The NCVT-3P is rugged enough for any job site. Benefits Non contact voltage tester's dual-range detects from 12 to 1000 V AC or 70 to 1000V AC for a broad variety of low-voltage or standard voltage applications Detects voltage with simultaneous visual and audible voltage indicators Bright flashlight illuminates work area and may be used independent of voltage detection function Green light indicates no voltage Lightweight, compact tool with pocket clip provides convenient storage and quick access Auto power-off feature conserves and extends battery life CAT IV 1000V rating provides expanded operation and protection Screw-thread battery cap with O-ring ensures protection against dust and water ingress 6.6-Foot (2 m) drop protection IP67: Dustproof and waterproof Conforms to CE requirements US Patent 10,073,142, D750,985 and other patents pending Technical Information Type: Dual Range with Flashlight Application: Non-Contact Detection and Testing of AC Voltage Special Features: Two Distinctive Modes: 70 to 1000V AC and 12 to 1000V AC; Flashlight Material: Polycarbonate Drop Protection: 6.6' (2 m) Voltage: 12-1000V AC Frequency: 50 - 5000 Hz Pollution Degree: 2 Ingress Protection : IP: Dustproof and Waterproof Standard: Cat IV 1000V Included: Batteries Batteries: 2x AAA Battery Life: 125 Hrs Overall Lenght: 5.70'' (14.5 cm) Overall Height: 1.09'' (2.8 cm) Overall Width: 0.93'' (2.4 cm) Weight: 1.9 oz (51 g) Documents Brochure Instruction Manual

Description The Scout® Pro 3 Tester Starter Kit is a versatile cable tester that locates and tests voice, data and video cables. Identify multiple cable runs with included location mapping remotes. This kit verifies accurate cable installations each time. Backlit display assists in reading results in lower light. Benefits Cable tester tests voice (RJ11/12), data (RJ45) and video (coax F-connector)_ terminated cables with clearly defined results Measure cable length (up to 2,000 feet) Test for Open, Short, Miswire or Split-Pair faults Backlit LCD screen displays cable length, wiremap, cable ID and test results Trace cables, wire pairs and individual conductor wires with multiple style tone generator (requires analog probe Cat. No. VDV500-123; sold separately) Hub blink mode to identify port location on a hub or a switch LanMap™ and CoaxMap™ Location Remotes (5 each) map and ID multiple cable runs in a single step Includes voltage warning, shield detection, auto power off, low battery indicator and a self-storing remote Auto Power-off feature to conserve battery life (9V included) Kit includes: Scout® Pro 3 Tester, (1) self-storing remote, (5) LanMap™ RJ45 locator remotes, (5) CoaxMap™ F-connector locator remotes, (1) coax F-connector, manual and 9V battery Technical Information Type: Twisted Pair, DATA, Voice, LAN, and Coaxial Application: Cable Testing Special Features: Measures Cable Length; Backlit LCD; Hub Blink Cable Type: DATA:, Shielded or Unshielded, CAT3, CAT5E, CAT6, CAT6A, CAT7; COAXIAL: RG59, RG6/6Q Overall Length: 7'' (17.8 cm) Overall Height: 3'' (7.6 cm) Overall Width: 1.25'' (3.2 cm) Material: Plastic and Metal Test-n-Map ID Remotes: (1) Self-Storing Location ID: (5) RJ45 Data and (5) F-Coax connector Locator Remotes Batteries: 9V Alkaline Battery Life: 50 Hours Active Drop Protection: 2 m Supported Remotes: 18 Connection & Adapter Types: RJ11, RJ12, RJ45, Coax F Display: Backlit LCD Multiple Style Tone Generator: Yes (5); Requires Tracing Probe (Cat. No. VDV500-123); Sold Separately Faults Detected: Open, Short, Miswire Test & Measure Types: Ethernet / Data and Coaxial Included: Tester, Self-Storing Remote, (5) LanMap RJ45 Locator Remotes, (5) CoaxMap F-connector Locator Remotes, (1) Coax F-adapter, Manual, (1) 9V Battery Documents Brochure Instruction Manual

Description The portable 1AC II non-contact voltage tester from Fluke are easy to use – just touch the tip to a terminal strip, outlet, or supply cord. When the tip glows red and the unit beeps, you know there's voltage present. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits in the workplace or at home and even detect miswires of an electrical outlet. Features Be aware of voltage easily - the tip glows red and a beeper sounds when voltage is detected Continuous self-test so you always know it’s working Voltage detection range for wide application use - 90 V to 1000 V AC or 200 V to 1000 V AC Audible/Silent mode for added convenience in quiet environments On/Off button Batteries included 2 year warranty Technical Information Specifications Operating Principles Senses the steady state electrostatic field produced by AC voltage through insulation without requiring contact to the bare conductor. A red glow at the tip and a beeping noise (if not switched OFF) indicates the presence of voltage. Voltage sensing ranges Nominally, 90 V AC to 1000 V AC Detector tip style Flat-tip Light source One high intensity red LED Agency Approvals ‍ ‍ ‍ Safety IEC 61010-1: Pollution Degree 2, IEC 61010-2-030: CAT IV 1000 V EMC IEC 61326-1: Portable IP Rating IP 40 Operating Temperature -10°C to 50°C (-14°F to 122°F) Operating Humidity Ranges 0% to 95% (0°C to 30°C) 0% to 75% (30°C to 40°C) 0% to 45% (40 to 55°C) Operating Altitude 3000 m Cleaning Clean with damp cloth Batteries 2 AAA alkaline batteries included Battery Life Typical battery life of greater than 1 year Warranty Period Two years Product does not respond to random electrostatic discharge. Document User's Manual

Description The Klein Tools NCVT-6 is a non-contact voltage tester (NCVT) with an integrated laser distance meter. It can detect voltage over the full-range from 12 to 1000 VAC and can measure distances from 2-Inch (51 mm) up to 66-Feet (20 m). The laser distance meter functions independently from the NCVT with a simple-to-use intuitive interface. Easy, single-button changes between voltage detection and laser distance measurements. Benefits Voltage Tester provides non-contact determination of AC voltage in cables, cords, circuit breakers, switches, outlets and wires, as well as AC voltage in security, entertainment, communications, environmental control, and irrigation systems Volt Pen detects AC voltage from 12 to 1000V with visual and audible indicators Incorporates a 66-Foot (20 m) Laser Distance Meter that can measure in meters, inches with decimals, inches with fractions, feet with decimals, or feet with fractions High-visibility reverse contrast display for better viewing in low light conditions Laser Class II, 630 to 670nm, Max. Power <1mW Simple-to-use intuitive interface; easy single-button changes between laser distance measurements and voltage detection Delivers simultaneous visual and audible voltage indicators when AC voltage is detected Audible voltage indicator beeps at a greater frequency the higher the voltage that is sensed, or the closer to the voltage source Built to withstand a 6.6-Foot (2 m) drop Auto Power-Off conserves and extends battery life Screw-thread battery cap Lightweight tool with pocket clip for easy everyday carrying and storage CAT IV 1000V safety rating Ingress Protection IP40 Dust Resistant Technical Information Type: Non-Contact Voltage Tester Application: Non-Contact Detection and Testing of AC Voltage with Integrated Laser Distance Meter Special Features: Full-Range Voltage Detection From 12-1000 VAC with Visual and Audible Indicators; Laser Distance Meter; High Visibility Reverse Contrast Display Material: Plastic and Electronic Assemblies Drop Protection: 6.6' (2 m) Voltage: 12-1000 VAC Frequency: 50 - 500 Hz Pollution Degree: 2 Ingress Protection: IP40 Dust Resistant Standard: CATIV 1000V, Laser: Class II, 630nm to 670nm, Max. Power <1mW Included: 2 x Alkaline 1.5V AAA Batteries Batteries: 2 x AAA Overall Length: 6.45'' (16.4 cm) Overall Height: 1.21'' (3.1 cm) Overall Width: 1.32'' (3.4 cm) Weight: 2.5 oz (72 g) Document Brochure Instructions Safety Data Sheet

Description Magnetic hanger for use with Klein Tools' CL120, CL220, CL320, CL390, CL600, CL700, CL800, CL900, ET600, MM325, MM420, MM720, and some older models. The strong magnet attaches securely to metal surfaces. Klein Tools’ Test and Measurement product line was exclusively designed from the ground up by electricians for electricians. Features Durable nylon weave resists wear and tear For use with CL120, CL220, CL320, CL390, CL600, CL700, CL800, CL900, ET600, MM325, MM420, MM720, and some older models Constructed with powerful Rare-Earth magnets Has a secure Velcro® loop & hook Hanger allows the user to safely work hands-free Clips securely into back of rubber boot For use with all Klein Tools Test & Measurement Multimeters and Professional Series Clamps Velcro® is a registered trademark of Velcro Industries B.V Technical Information Application: Electrician's Multimeters and Select Clamps Special Features: Rare-Earth Magnets Material: Nylon For Use With: CL120, CL220, CL320, CL390, CL600, CL700, CL800, CL900, ET600, MM325, MM420, MM720 and some older models Weight: 1.10 oz (31.0 g)

Description Klein Tools Receptacle Testers are designed to detect the most common wiring problems in standard and GFCI receptacles. A convenient chart on the tester helps determine wiring conditions in the outlet, based on LED lights results. Conditions indicated: open ground, reverse polarity, open hot, open neutral, hot/ground reversed. Benefits Detects the most common wiring problems in standard and GFCI receptacles Works on GFI outlets and confirms operation of the ground fault protective device Conforms to UL Std 1436, Certified to CSA Std C22.2 #160 Built to withstand a 6.6-foot (2m) drop Operating temp: 32-degrees F to 140-degrees F (0-degrees C to 40-degrees C) Nominal Voltage: 110/125V AC at 50/60Hz in 3-wire outlet Technical Information Type: GFCI and Standard Receptacle Tester Application: Determine Wiring Condition in Outlet Features: Convenient Chart on the Tester Drop Protection: 6.6' (2 m) GFCI: Yes Voltage: 110/125V AC at 50/60Hz in. 3-Wire Outlet Overall Length: 1.62'' (4.1 cm) Overall Height: 2.88'' (7.3 cm) Overall Width: 1.88'' (4.8 cm) Weight: 1.9 oz (54 g) Documents GFCI Receptacle Tester Instruction Manual

Description Klein Tools ET16 is a USB Type-C borescope with a 9 mm camera surrounded by 6 LEDs attached to a 10-Foot (3.0 m) armored gooseneck cable. The digital camera has a USB Type-C (and micro-USB) connection for most Android® (OTG 4.0 or higher) smartphones and devices. The camera and video output are displayed on the Android® device using the free Klein Tools Borescope App, available for download at www.KleinTools.com. Benefits Borescope connects to Android on-the-go (OTG) version 4.0 or higher devices; NOT for iPhones or iPads Waterproof IP67 9 mm camera for high quality 640 x 480 pixel images Capture and share images and video via text or email using the Klein Tools free app Armored 10-Foot (3 m) gooseneck cable for extended reach Six white LEDs with adjustable brightness control for best pictures Direct USB Type-C connection with adapter for micro-USB No batteries; powered by device connection Includes borescope, carrying case, micro-USB adapter, and instruction manual Technical Information Type: USB Type-C or Micro-USB for Android Application: Electrical, HVAC, Plumbing, Aircraft Special Features: 10' (3 m) Armored Gooseneck and 6 LED Lights Overall Length: 3.7'' (9.4 cm) Overall Height: 0.95'' (2.4 cm) Overall Width: 1.3'' (3.3 cm) Camera Head Diameter: 0.35'' (9 mm) Auto-Power Off: No Data Logging: No Material: ABS and Electrical Components Display: Via Smartphone App Screen Resolution: 640 x 480 Max Digital Zoom: Yes Recording Capability: Still Image and Video IP Rating: IP67 (Camera Only) Included: Borescope with 10' Gooseneck, USB Adapters, Carrying Case, and Instruction Manual Weight: 12.5 oz (354 g) Documents Brochure Instruction Manual

Description The CL900 is an auto-ranging, true root mean square (TRMS) digital clamp meter that measures AC/DC current via the clamp and measures AC/DC voltage, resistance, continuity, frequency, duty-cycle, capacitance, and tests diodes via test-leads. It features a Low Impedance (LoZ) mode for identifying and eliminating ghost or stray voltages and has a dedicated mode for capturing Inrush Current. Benefits Digital Clamp Meter measures 2000A AC/DC, 1000V AC/DC, 60 Milliohm Rugged Klein ''TOUGH METER'' industrial design stands up to job site demands; built to withstand a 6.6-foot (2m) drop Automatically ranging True Root Mean Squared (TRMS) measurement technology for accuracy CAT IV 600V, CAT III 1000V, Class 2, double insulation safety rating Backlit display for clear visibility in environments with low ambient lighting Dedicated mode for capturing Inrush Current Non-contact voltage tester integrated into the clamp Low impedance (LoZ) mode for identifying and eliminating ghost or stray voltages Audible continuity, capacitance, diode test, frequency and duty cycle, min/max feature, data hold capability Test leads measure AC/DC voltage, resistance, continuity, frequency, duty-cycle, capacitance, and diodes Clamp measures AC and DC current Powers off automatically after 30 minutes of non-use to conserve battery life Low battery indicator and easily accessible battery compartment Includes carrying case, instruction manual, straight input test leads, and 2 x AAA batteries Technical Information Brand: Klein Tools Application: Measures Current to 2000A AC/DC Material: Plastic/ Electronics Batteries: 2 x AAA Auto Power-off: Yes Jaw Size: 2" (5 cm) Drop Protection: 6.6' (2 m) Display: 6000 Count LCD Functions: Audible Continuity, Capacitance, Diode Test, Frequency & Duty Cycle, Min/Max feature, Data Hold capability, Inrush Current, Low Impedance AC/DC Voltage: 1000V Frequency: 500kHz Current: 2000A AC/DC Capacitance: 6000 µF Ohms (Resistance): 60MΩ DC Polarity Indicator: Yes DC Micro-Amp: No Ingress Protection: IP40 Standard: CAT IV 600V, CAT III 1000V Overall Length: 10.39'' (26.4 cm) Overall Height: 1.70'' (4.3 cm) Overall Width: 3.90'' (9.9 cm) Documents CL900 Digital Clamp Meter Specification sheet CL900 Instruction Manual Safety Data sheet

Description The voltage detector is designed to check for the presence of AC voltage, signaling the user with an intermittent tone and flashing LED. It features a self-test option that continuously tests the integrity of the entire unit, including the antenna. Benefits Non‑contact voltage detection from 50V to 1000V AC Patented automatic self‑test verifies circuit integrity Audible and visual alert when voltage is present Bright flashlight for use in dark work areas Can be used to detect voltage in outlets, lighting fixtures, circuit breakers, wires, and cables Automatically turns off after 5 minutes of inactivity to conserve battery life Technical Information Brand: Greenlee Application: Receptacle testing, wire and cable tracing, circuit breaker testing Measurement Category: Category IV, 1000 V per UL 61010-1 Frequency Rating: 50/60Hz Voltage Rating: 50V - 1000V Temperature: 14 to 122°F (-10 to 50°C) less than 80% relative humidity (non-condensing) Altitude: 6500' (2000 m) maximum Indication Type: Audible and Visual Alert (LED & Tone) Included: (2) 1.5V AAA Batteries Documents Brochure Instruction Manual

Description Introducing the new Ferret Stick, an extendable rod made of high quality materials. The Stick is made of light-weight stainless steel with a non-slip rubber handle. It expands up to 55″ (140cm) with a 1/4-20 UNC thread which is compatible with all Ferret products. Benefits Extendable to 55″ Retracted length 12″ Stainless steel material Rust resistant Rubber grip handle Includes secure wrist strap Compatible with all Ferret products Document Brochure

Description Klein Tools CL320 is an automatically ranging true root mean square (TRMS) digital clamp meter that measures AC current via the clamp, AC/DC voltage, DC microamps, resistance, continuity, frequency, capacitance, and tests diodes via test-leads, and temperature via a thermocouple probe. Benefits Clamp Meter with automatically ranging true mean squared (TRMS) technology for increased accuracy Measures AC current via the clamp and AC/DC voltage, DC microamps, resistance, continuity, frequency, capacitance and test diodes via the test leads Thermocouple probe measures temperature Built to withstand a 6.6-foot (2 m) drop CAT III 600V, Class 2, Double insulation safety rating Backlit display for clear readings Powers off automatically after 15 minutes of non-use to conserve battery life Includes a carrying case, test leads, and 3 x AAA batteries Low battery indicator and easily accessible battery compartment Meets requirements for use in basic and controlled electromagnetic environments like residential, office and light-industrial locations Included: Carrying Case, 41'' (1041.4 mm) Test Leads, Thermocouple with Adapter, and Batteries Technical Information Application: Measures AC Current, DC micro-Amp current Functions: AC current, AC/DC voltage, DC micro-Amps, resistance, continuity, frequency, capacitance and test diodes. Material: ABS Batteries: 3 x AAA Auto-Power Off: Yes Jaw Size: 1.12'' (2.9 cm) Drop Protection: 3.3' (1 m) Display: 4000 Count LCD Voltage: 600V AC; 600V DC Frequency: 10Hz - 1 MHz Current: 400A AC Capacitance: 4000µF Ohms (Resistance): 40MΩ AC Voltage: 600 DC Voltage: 600 DC Polarity Indicator: Yes DC Micro-Amp: 200 μA Temperature Range: -40° to 1832°F (-40° to 1000°C) Standard: CAT III 600V; CE Certified Overall Length: 8.7'' (22.1 cm) Overall Height: 1.61'' (4.1 cm) Overall Width: 3.02'' (7.7 cm) Weight: 10.1 oz (286 g) Documents Brochure Instruction Manual

Description The LAN Scout® Jr. 2 Cable Tester tests installed or loose data (CAT 5e, CAT 6/6A) cables terminated with RJ45 connectors. It also, tones cables with multiple tone frequencies. The larger display is backlit for easier reading in low lit areas. This model uses 2 x AAA batteries (included). Three buttons provide an intuitive user interface. Features Cable tester for data (RJ45) terminated cables and patch cords Large backlit LCD for low lit areas displays pin to pin wiremap results Test for Open, Short, Miswire or Split-Pair faults, Cross-over and Shield Intuitive user interface features three buttons with simple, easy-to-identify test responses Tone on single wire, wire pair or all 8 conductor wires Multiple style tone generator (solid / warble); requires probe Cat. No. VDV500-123 (sold separately) Auto Power-Off feature; 10-minutes in test mode, 60-minutes in tone mode Soft, slip-resistant, rugged overmold for easy gripping and durability Replaceable 2 x AAA batteries (included) Replaceable self-storing remote (included) Replacement remote available; sold separately (Cat. No. VDV999-200) Technical information Type: DATA, Voice, LAN Application: Cable Testing Special Features: Backlit LCD Cable Type: Shielded or Unshielded; Cat7, Cat6/6A, Cat5E, Cat3 Overall Length: 5'' (13 cm) Overall Height: 1'' (2.5 cm) Overall Width: 2.5'' (6.4 cm) Material: Plastic and Stamped Metal Test-n-Map ID Remotes: 1 Location ID: No Batteries: 2 × AAA Alkaline Battery Life: Active: 80 Hours; Standby: 3 Years Drop Protection: 2' (0.6 m) Supported Remotes: (1) Self-Storing Connection & Adapter Types: RJ45 Display: LCD Multiple Style Tone Generator: Yes Faults Detected: Pass, Miswire, Open-Fault, Short-Fault, Split Pair and Shield Test & Measure Types: Data, RJ45 Included: Tester, Remote, 2 × AAA Alkaline Batteries Weight: 4.3 oz (122 g) Document Brochure Instruction

Description Single button testing of RJ11, RJ12 and RJ45 terminated voice and data cables, Tests CAT3, CAT5e and CAT6/6A cables. This simple, compact data cable tester for RJ11, RJ12 and RJ45 terminated voice and data cables for Miswires, Open-Faults, Short-Faults and Shield. Instant LED responses indicate cable status. The test remote stores securely in the tester body. The Auto Power-Off feature shuts the tester down automatically to save the 9V battery (included). Benefits Cable tester with single button testing of RJ11, RJ12 and RJ45 terminated voice and data cables Tests CAT3, CAT5e and CAT6/6A cables Fast LED responses indicate cable status (Pass, Miswire, Open-Fault, Short-Fault, and Shield) Test remote stores securely in tester body Compact tester easily fits in your pocket Auto Power-off feature to conserve battery life (9V included) Low battery indicator Technical Information Type: Twisted Pair, DATA, Voice, LAN Application: Cable Testing Special Features: LED response Cable Type: CAT3, CAT5e, CAT6/6A Overall Length: 5'' (12.7 cm) Overall Height: 1.25'' (3.2 cm) Overall Width: 2.5'' (6.4 cm) Material: Plastic and Stamped Metal Test-n-Map ID Remotes: 1 Batteries: 1 x 9V Battery Life: Active: 80 Hours, Standby: 3.5 years Drop Protection: 2' (0.6 m) Supported Remotes: VDV999150 Connection & Adapter Types: RJ11, RJ12, and RJ45 Display: LED Multiple Style Tone Generator: No Faults Detected: Pass, Miswire, Open-Fault, Short-Fault, and Shield Test & Measure Types: Voice, Data, RJ45, RJ11 Included: Tester, Remote, 9V Battery Weight: 4.0 oz. (116 g) Documents Brochure Instruction Manual

Description he Ferret Pro, designed and engineered by Ferret Tools, is a professional and durable next generation inspection tool designed and engineered with award winning features to provide easier, faster & safer visual inspections. Includes App controlled variable focus lens and super-fast charge. If you need to locate and pull in cable or need to get your eyes on something out of reach, then Ferret Pro is the perfect tool. Ideal tool for electricians and other trades. Uses: Visual inspections. Light cable installations. Inspect for maintenance and repair work on the job or at home. Very fast and easy to turn on and link to your phone so perfect for a quick look. Record photos and videos direct to your phone’s photo gallery. Features Built-in WiFi hotspot, wireless & rechargeable – Provides a high-resolution live stream with a wireless range of up to 50′ (15m). Built-in rechargeable battery. IP67 dustproof & waterproof. Free & easy to use App – Easy to use, intuitive Free Ferret App allows control over the camera. 720p HD streaming – Crisp clear images with 720p high resolution provides real time photos & video directly to a smart device. Adjustable bright white LEDs – Easily glides into confined dark crawl spaces. Bright white LEDs help investigate, locate, diagnose & fix problems. Digital zoom function – View objects closer with the Ferret App digital zoom. NEW Ferret always up viewing mode – In the Ferret App setting screen select to have the image view either normal mode or always up mode. NEW App controlled variable focus – Focus down as close as 2.5″ (6cm) to see fine detail. Focus out to infinity for extra clarity. NEW Super fast charge – Charge Ferret from flat to 95% charged in only 1 hour. Technical Information Model: CFWF50A2 Dimensions: 3-1/5"L x 1-1/4"W (80mm x 32mm) Weight: 1-1/6 ounces (33g) Camera Resolution: 720p HD Wireless Range: Up to 50' (15m) Line of sight Operating Time: Up to 90 minutes (LEDs on medium brightness setting) Charge Up Time: ~80 minutes (95% charged in 60 minutes) Frequency: 2.4GHz Operating Voltage: 5V DC Operating Temperature: 32°F to 95°F (0°C to 35°C) Storage Temperature: -4°F to 113°F (-20°C to 45°C) Kit Includes 1x Padded EVA case 1x Ferret Pro camera 1x Flexible gooseneck 1x Short rod; strong hook and magnet 1x Right angle adaptor 1x Thread adaptors 1x USB-C charge cable 1x Spare O-rings 1x Instruction manual. Documents Brochure Ferret Pro Information Sheet Configuration Guide Instruction Manual

Description Klein Tools MM450 Multimeter is a TRMS auto-ranging slim multimeter that measures AC/DC voltage, AC/DC current, and resistance. It can also measure temperature, capacitance, frequency, duty-cycle, and test diodes and continuity. It features a high visibility, reverse contrast display with an optical sensor to automatically optimize viewing in dark or bright ambient light. The slim profile of the MM450 makes this meter almost the size of a cell phone and it conveniently fits into most pockets. The MM450 features the same quality leads you have come to expect from the Digital Multimeter line at Klein Tools. Years of field research, combined with extensive input from electricians across America, inspired the development of meters and electrical testers loaded with innovative, time-saving features. Features Multimeter with automatic ranging true root mean square (TRMS) technology for increased accuracy Measures up to 600V AC/DC voltage, 10A AC/DC current and 50 MΩ resistance, continuity, temperature, capacitance, frequency, duty-cycle, and test diodes High visibility, reverse contrast display with automatic backlight adjustment Lead-Alert protection with LEDs for test lead placement Slim profile allows multimeter to conveniently fit into most pockets Low battery indicator and easily accessible battery and fuse compartment Durable meter built to withstand a 6.6-Foot (2 m) drop Includes carrying pouch, safety rated CAT III 1000V/CAT IV 600V test leads, thermocouple with adapter and 2 x AAA batteries CAT III 600V safety rating For use in basic and controlled electromagnetic environments such as residential, business and light-industrial locations Technical Information Type: Digital Multimeter Application: Testing and Measuring Voltage Special Features: Slim Profile; Lead-Alert; High-Visibility Display with Optical Sensor; Auto-Range; Min/Max Measurements; Auto Power-Off; Data-Hold Material: ABS, Electrical Components Batteries: 2 x AAA Drop Protection: 6.6' (2 m) Display: 4000 Count LCD Color: Orange/Black Functions: Auto Power-Off; Data Hold; Auto-Range Mode; Min/Max Value of Measurement; Backlight; Lead Alert Voltage: 600V AC/DC Frequency: 1 Hz to 50 KHz Current: 10A AC/DC Capacitance: 400 µF Ohms (Resistance): 50 MΩ Standard: CAT III 600V; CE and UKCA Certified Temperature Range: -40° to 1832°F (-40° to 1000°C) Included: Carrying Pouch, Test Leads, Thermocouple with Adapter, Batteries Overall Length: 6.5'' (16.5 cm) Overall Height: 1.09'' (2.8 cm) Overall Width: 3.14'' (8 cm) Weight: 9.1 oz (258 g) Document Brochure Instruction

Description The Ferret Lite, designed and engineered by Ferret Tools, is a general-purpose high-quality inspection camera that gives eyes inside hard to reach locations. It includes award-winning handy features with the addition of the always up viewing mode to help with intuitive inspections. If you like to keep things simple & don’t need all the bells and whistles, the Ferret Lite is the ideal cost-effective solution to help on the job or at home. The Ferret Lite incorporates all of the design and innovation of the original award-winning Ferret WiFi. Uses: Visual inspections. Light cable installations. Inspect for maintenance and repair work on the job or at home. Very fast and easy to turn on and link to your phone so perfect for a quick look. Record photos and videos direct to your phone’s photo gallery Features Built-in WiFi hotspot, wireless & rechargeable – Provides a high-resolution live stream with a wireless range of up to 50′ (15m). Inbuilt rechargeable battery. IP67 dustproof & waterproof. Free & easy to use App – Easy to use, intuitive Free Ferret App allows control over the camera. 720p HD streaming – Crisp clear images with 720p high resolution provides real time photos & video directly to a smart device. Adjustable bright white LEDs – Easily glides into confined dark crawl spaces. Bright white LEDs help investigate, locate, diagnose & fix problems. Digital zoom function – View objects closer with the Ferret App digital zoom. NEW Ferret always up viewing mode – In the Ferret App setting screen select to have the image view either normal mode or always up mode. Technical Information Model: CFWF50L Dimensions: 3-3/4"L x 1"W (94mm x 24mm) Weight: 1-1/8 ounces (33g) Camera Resolution: 720p HD Wireless Range: Up to 50' (15m) Line of sight Operating Time: Up to 90 minutes (LEDs on medium brightness setting) Charge Up Time: +100 Minutes Frequency: 2.4GHz Operating Voltage: 5V DC Operating Temperature: 32°F to 95°F (0°C to 35°C) Storage Temperature: -4°F to 113°F (-20°C to 45°C) Kit Includes 1x Padded EVA case 1x Ferret Lite camera 1x Flexible gooseneck 1x Turn & click front hook and magnet 1x Locking ring 1x Thread adaptors 1x USB-C charge cable 1x Spare O-rings 1x Instruction manual Documents Brochure Ferret Lite Information Sheet Configuration Guide Instruction Manual

Description The NCVT2PKIT from Klein Tools includes a dual-range, non-contact voltage tester as well as a receptacle tester. The NCVT-2P is a non-contact voltage tester that detects 12 to 1000V AC and indicates the presence of voltage in cables, cords, circuit breakers, light fixtures, switches, outlets and wires as well as AC voltage in doorbells, thermostats, low voltage lighting and irrigation systems. Includes both visual and audible signals. The receptacle tester will troubleshoot standard 120V AC grounded outlets. Benefits Kit contains a non-contact voltage tester and receptacle tester Dual range NCVT-2P automatically detects and indicates low voltage range and standard voltage (48-1000V AC) NCVT-2P provides non-contact detection of standard voltage in cables, cords, circuit breakers, lighting fixtures, switches, outlets and wires NCVT-2P is a lightweight, compact tool with pocket clip for convenient storage and quick access CAT IV 1000 Volt rating provides expanded operation and protection Screw-thread battery cap with O-ring ensures protection against dust and water ingress for the NCVT-2P Receptacle Tester is designed to detect the most common wiring problems in standard receptacles Conditions the Receptacle Tester indicates: wiring correct, open ground, reverse polarity, open hot, open neutral, hot/ground reversed Technical Information Type: Dual Range for NCVT-2P Application: Detects and Indicates Low Voltage and Standard Voltage; Detects Most Common Wiring Problems in Standard Receptacles Special Features: Two Distinctive Modes on NCVT-2P: 70 to 1000V AC and 12 to 1000V AC Material: Polycarbonate Drop Protection: NCVT2P: 6.6' (2 m); RT105: 3.3' (1 m) Voltage: 12 - 1000V AC Frequency: 50 - 500 Hz Pollution Degree: NCVT-2P: 2 Ingress Protection: NCVT-2P: IP54 Standard: NCVT-2P: CAT IV 1000V; RT105: CAT II 125V Included: Non-Contact Voltage Tester with 2 x AAA Batteries and Receptacle Tester Batteries: 2 x AAA Battery Life: 142 Hrs Overall Length: 5.8'' (14.8 cm) Overall Height: 1.1'' (2.8 cm) Overall Width: 0.9'' (2.2cm) Weight: 1.7 oz (48 g) Document Selection Guide Brochure Instructions Safety Data Sheet

Description The NCVT-2P is a non-contact voltage tester that detects 12 to 1000V AC and indicates the presence of voltage in cables, cords, circuit breakers, light fixtures, switches, outlets and wires as well as AC voltage in doorbells, thermostats, low voltage lighting and irrigation systems. Includes both visual and audible signals. The NCVT-2P is rugged enough for any job site. Benefits Non contact voltage tester's dual-range capabilities allow tester to detect from 12 to 1000 V AC or 70 to 1000V AC for a broad variety of low-voltage or standard voltage applications Electrical voltage tester detects voltage with simultaneous visual and audible indicators Non-contact detection of low voltage in security, entertainment, communications, environmental control, and irrigation systems Green light indicates no voltage Lightweight, compact tool with pocket clip provides convenient storage and quick access Auto power-off feature conserves and extends battery life CAT IV 1000 V rating provides expanded operation and protection Screw-thread battery cap with O-ring ensures protection against dust and water ingress 6.6-Foot (2 m) drop protection IP54: Dustproof and waterproof Conforms to CE requirements US Patent 10,073,142, D750,985 and other patents pending Technical Information Type: Dual Range Application: Non-Contact Detection and Testing of AC Voltage Special Features: Two Distinctive Modes: 70 to 1000V AC and 12 to 1000V AC Material: Polycarbonate Drop Protection: 6.6' (2 m) Voltage: 12 - 1000V AC Frequency: 50 - 500 Hz Pollution Degree: 2 Ingress Protection: IP54 Standard: CAT IV 1000V Included: Batteries Batteries: 2 x AAA Battery Life: 142 Hrs Overall Length: 5.82'' (14.8 cm) Overall Height: 1.09'' (2.8 cm) Overall Width: 0.86'' (2.2cm) Weight: 1.7 oz (48.1 g) Document Selection Guide Brochure Instructions Safety Data Sheet