Ceiling Lighting

Description The SlimLED you know and love is now available with a 5-position CCT selectable switch. Adjustable from below the ceiling, simply remove the faceplate, select your color temperature, then magnetically snap on one of the trim options. Features Body Durable airtight aluminum body with UV stable paint and white PMMA diffuser lens for low glare. Includes silicone gasket for wet location applications. Includes White interchangeable magnetic trim for round fixtures. LED Characteristics This general application light fixture features a 12 watt (for 4") LED module that maintains uniform intensity producing up to 750 lumens; with a typical CRI of 90. Available with 5 step CCT switch (2700 K, 3000 K, 3500 K, 4000 K and 5000 K). Dimming 100%-10% dimming capability. This fixture is compatible with industry standard TRIAC/ELV dimmers. For compatible dimmers, visit www.liteline.com/SlimLED. Beam Spread The fixture lens provides 110° beam spread. Mounting Includes two spring loaded clips to attached to any ceiling material. The slim profile allows to be mounted under joists or duct work. LED Driver Extruded aluminum hardwire box with 300mA (for 4") or 370mA (for 6") dimmable class II electronic LED driver with 100-135V AC input. Includes an 18" plenum rated FT6 wire with DC 2.1 connector from driver to fixture. Quick Connect push-in terminals “Quick connect” push-in terminals for fast and easy wiring. Operating Temperature -30°C~40°C (-22°F~104°F) Environment Suitable for wet locations and suitable for insulated ceiling applications Technical Information Application : Ceiling Recessed Mount Approved Location: Wet / Insulated Ceilings Beam Angle: 110° CCT: 2700 K / 3000 K / 3500 K / 4000 K / 5000 K Certification: cETLus Color: White CRI: 90 Dimming: Yes Dimming Tech: Forward/Reverse phase / TRIAC/ELV Energy Star: Yes Hole Cut: 4" : Ø 4¼ " (108mm) Input: 100-135V AC, 50 / 60Hz LM79: Yes LM80: Yes Lumens: Up to 750 Power Factor: 0.9 Projected Life: 70% @ 50,000 hrs Title: 24 JA8 (up to 4000 K) Warranty: Lifetime Wattage: 12W

Description The LUNA 4" fixture, is a 12 watt, recessed light fixture for retrofit, remodel or new construction applications with 360-degree rotation and 30-degree tilt. It is a high-performance, easy to install residential grade downlight solution that offers good light output, energy-efficiency and streamlined design. Suitable for wet locations. Available here in a 4-pack with an OnCloud dimmer for Wi-Fi control through the WiZ app to create scenes, set schedules and connect with smart speakers. ***The On Cloud Dimmer only works for single pole applications.*** Features Durable airtight aluminum body with adjustable regressed gimbal. Includes anodized blue heat sink to provide maximum airflow for the LED light source General application light fixture featuring a 12 watt LED module that maintains uniform intensity producing up to 700 lumens, with a typical CRI of 90 Available in 3000k color temperatures 100%-10% dimming capability. This fixture is compatible with industry standard forward-phase / reverse-phase and TRIAC/ELV dimmers Fixture lens provides 38° beam spread Includes two spring loaded clips to attached to any ceiling material Extruded aluminum hardwire box with 300mA dimmable class II electronic LED driver with 100-135V AC input. Includes an 18" FT6 rated cable with DC 2.1 connector between driver and fixture approved for use in plenums and suspended ceilings Three "quick connect" push-in terminals for fast and easy wiring Operating Temperature from -20°C to 40°C (-4°F to 104°F) Suitable for wet locations Approved for direct contact with insulation Technical Information Application: Ceiling Recess Mount Approved Location: Wet / Insulated Ceilings Beam Angle: 38° CCT: 3000 K to 2000 K Certification: cETLus Class II: Yes Colour: White CRI: 90 Dimming: Yes Dimming Tech: Forward/reverse-phase - TRIAC/ELV Energy Star: Yes Hole Cut: Ø 4¼ " (108mm) Input: 100-135V AC, 60Hz Lumens: Up to 700 Lumens per Watt: Up to 59 Power Factor: 0.9 Projected Life: 70% @ 50,000 hrs Warranty: Lifetime Wattage: 12W Document Brochure Specification Sheet

Description The LUNA 4" fixture, is a 12 watt, recessed light fixture for retrofit, remodel or new construction applications with 360-degree rotation and 30-degree tilt. It is a high-performance, easy to install residential grade downlight solution that offers good light output, energy-efficiency and streamlined design. Suitable for wet locations. Also available in a 4-pack with an OnCloud dimmer for Wi-Fi control through the WiZ app to create scenes, set schedules and connect with smart speakers. Features Durable airtight aluminum body with adjustable regressed gimbal. Includes anodized blue heat sink to provide maximum airflow for the LED light source General application light fixture featuring a 12 watt LED module that maintains uniform intensity producing up to 780 lumens, with a typical CRI of 90 On fixture selectable switch allows switching between 2700k, 3000k, 3500k, 4000k and 5000k color temperature 100%-10% dimming capability. This fixture is compatible with industry standard forward-phase / reverse-phase and TRIAC/ELV dimmers Fixture lens provides 38° beam spread Includes two spring loaded clips to attached to any ceiling material Extruded aluminum hardwire box with 300mA dimmable class II electronic LED driver with 100-135V AC input. Includes an 18" FT6 rated cable with DC 2.1 connector between driver and fixture approved for use in plenums and suspended ceilings Three "quick connect" push-in terminals for fast and easy wiring Operating Temperature from -20°C to 40°C (-4°F to 104°F) Suitable for wet locations Approved for direct contact with insulation Technical Information Application: Ceiling Recess Mount Approved Location: Wet / Insulated Ceilings Beam Angle: 38° CCT (color selectable): 2700 K / 3000 K / 3500 K / 4000 K / 5000 K Certification: cETLus Class II: Yes Colour: White CRI: 90 Dimming: Yes Dimming Tech: Forward/reverse-phase - TRIAC/ELV Energy Star: Yes Hole Cut: Ø 4¼ " (108mm) Input: 100-135V AC, 60Hz Lumens: Up to 850 Lumens per Watt: Up to 71 Power Factor: 0.9 Projected Life: 70% @ 50,000 hrs Warranty: Lifetime Wattage: 12W Document Brochure Specification Sheet Installation Compatible Dimmers

Description The LUNA 4" fixture, is a 12 watt, recessed light fixture for retrofit, remodel or new construction applications with 360-degree rotation and 30-degree tilt. It is a high-performance, easy to install residential grade downlight solution that offers good light output, energy-efficiency and streamlined design. Suitable for wet locations. Also available in a 4-pack with an OnCloud dimmer for Wi-Fi control through the WiZ app to create scenes, set schedules and connect with smart speakers. Features Durable airtight aluminum body with adjustable regressed gimbal. Includes anodized blue heat sink to provide maximum airflow for the LED light source General application light fixture featuring a 12 watt LED module that maintains uniform intensity producing up to 700 lumens, with a typical CRI of 90 Available in 3000k color temperatures 100%-10% dimming capability. This fixture is compatible with industry standard forward-phase / reverse-phase and TRIAC/ELV dimmers Fixture lens provides 38° beam spread Includes two spring loaded clips to attached to any ceiling material Extruded aluminum hardwire box with 300mA dimmable class II electronic LED driver with 100-135V AC input. Includes an 18" FT6 rated cable with DC 2.1 connector between driver and fixture approved for use in plenums and suspended ceilings Three "quick connect" push-in terminals for fast and easy wiring Operating Temperature from -20°C to 40°C (-4°F to 104°F) Suitable for wet locations Approved for direct contact with insulation Technical Information Application: Ceiling Recess Mount Approved Location: Wet / Insulated Ceilings Beam Angle: 38° CCT: 3000 K to 2000 K Certification: cETLus Class II: Yes Colour: White CRI: 90 Dimming: Yes Dimming Tech: Forward/reverse-phase - TRIAC/ELV Energy Star: Yes Hole Cut: Ø 4¼ " (108mm) Input: 100-135V AC, 60Hz Lumens: Up to 700 Lumens per Watt: Up to 59 Power Factor: 0.9 Projected Life: 70% @ 50,000 hrs Warranty: Lifetime Wattage: 12W Document Brochure Specification Sheet Installation Compatible Dimmers

Description The RA35-12RG is a 12 watt 3.5" round regressed gimbal recessed light fixture for retrofit application. It is a high-performance, easy to install downlight solution that offers good light output, energy-efficiency and streamlined design. Suitable for damp locations. Features Durable airtight aluminum body with adjustable gimbal. Includes anodized blue heat sink to provide maximum airflow for the LED light source. This general application light fixture features a 12 watts LED module that maintains uniform intensity producing up to 680 Lumens; with a typical CRI of 90. On-fixture color selectable switch allows switching between 2700 K, 3000 K, 3500 K, 4000 K and 5000 K color temperatures. 100%-10% dimming capability. This fixture is compatible with industry standard TRIAC/ELV dimmers (See specification sheet for listing of compatible dimmers) The fixture lens provides 38° beam spread. Includes two spring loaded clips to attached to any ceiling material Extruded aluminum hardwire box with 300mA dimmable class II electronic LED driver with 100-135V AC input. Includes an 16" cable from driver to fixture. Three "Quick connect" push-in terminals for fast and easy wiring. Operating temperature range from -20°C to 40°C (-4°F to 104°F) Suitable for wet locations and suitable for insulated ceiling applications. Approved for direct contact with insulation. Airtight Technical Information Application: Ceiling Recess Mount Approved Location: Wet / Insulated Ceilings Beam Angle: 38° CCT (color selectable) 2700 K / 3000 K / 3500 K / 4000 K / 5000 K Certification: cETLus Class II: Yes Color: White CRI: 90+ Dimming: Yes Dimming Tech: Forward/reverse-phase - TRIAC/ELV Energy Star: Yes Hole Cut: Ø 35⁄8" (92mm) Input: 100-135V AC, 60Hz Lumens: Up to 850 Lumens per Watt: Up to 78 Power Factor: >0.90 Projected Life: 70% @ 50,000 hrs Warranty: Lifetime Wattage: 12W Document Brochure Installation instruction Compatible Dimmers Specification Sheet

Description The RA35-12G is a 12 watt 3.5" round gimbal recessed light fixture for retrofit application. It is a high-performance, easy to install residential grade downlight solution that offers good light output, energy-efficiency and streamlined design. Suitable for damp locations. Features Durable airtight aluminum body with adjustable gimbal. Includes anodized blue heat sink to provide maximum airflow for the LED light source. This general application light fixture features a 12 watts LED module that maintains uniform intensity producing up to 850 Lumens; with a typical CRI of 90. 100%-10% dimming capability. This fixture is compatible with industry standard TRIAC/ELV dimmers (See specification sheet for listing of compatible dimmers) The fixture lens provides 40° beam spread. Includes two spring loaded clips to attached to any ceiling material Extruded aluminum hardwire box with 300mA dimmable class II electronic LED driver with 100-135V AC input. Includes an 16" cable from driver to fixture. Three "Quick connect" push-in terminals for fast and easy wiring. Operating temperature range from -20°C to 40°C (-4°F to 104°F) Suitable for damp locations. Approved for direct contact with insulation. Technical Information Application: Ceiling Recess Mount Approved Location: Wet / Insulated Ceilings Beam Angle: 38° CCT (color selectable): 2700 K / 3000 K / 3500 K / 4000 K / 5000 K Certification: cETLus Class II: Yes Color: White CRI: 90+ Dimming: Yes Dimming Tech: Forward/reverse-phase, TRIAC/ELV Energy Star: Yes Hole Cut: Ø 35⁄8" (92mm) Input: 100-135V AC, 60Hz Lumens: 767 / 789 / 828 / 850 / 796 Lumens per Watt: Up to 78 Power Factor: >0.90 Projected Life: 70% @ 50,000 hrs Warranty: Lifetime Wattage: 12W Document Brochure Specification Sheet Compatible Dimmers Instruction

Description The LUNA 4" fixture, is a 12 watt, recessed light fixture for retrofit, remodel or new construction applications with 360-degree rotation and 30-degree tilt. It is a high-performance, easy to install residential grade downlight solution that offers good light output, energy-efficiency and streamlined design. Suitable for wet locations. Also available in a 4-pack with an OnCloud dimmer for Wi-Fi control through the WiZ app to create scenes, set schedules and connect with smart speakers. Features Durable airtight aluminum body with adjustable regressed gimbal. Includes anodized blue heat sink to provide maximum airflow for the LED light source General application light fixture featuring a 12 watt LED module that maintains uniform intensity producing up to 780 lumens, with a typical CRI of 90 On fixture selectable switch allows switching between 2700k, 3000k, 3500k, 4000k and 5000k color temperature 100%-10% dimming capability. This fixture is compatible with industry standard forward-phase / reverse-phase and TRIAC/ELV dimmers Fixture lens provides 38° beam spread Includes two spring loaded clips to attached to any ceiling material Extruded aluminum hardwire box with 300mA dimmable class II electronic LED driver with 100-135V AC input. Includes an 18" FT6 rated cable with DC 2.1 connector between driver and fixture approved for use in plenums and suspended ceilings Three "quick connect" push-in terminals for fast and easy wiring Operating Temperature from -20°C to 40°C (-4°F to 104°F) Suitable for wet locations Approved for direct contact with insulation Technical Information Application: Ceiling Recess Mount Approved Location: Wet / Insulated Ceilings Beam Angle: 38° CCT (color selectable): 2700 K / 3000 K / 3500 K / 4000 K / 5000 K Certification: cETLus Class II: Yes Colour: Black CRI: 90 Dimming: Yes Dimming Tech: Forward/reverse-phase - TRIAC/ELV Energy Star: Yes Hole Cut: Ø 4¼ " (108mm) Input: 100-135V AC, 60Hz Lumens: Up to 850 Lumens per Watt: Up to 71 Power Factor: 0.9 Projected Life: 70% @ 50,000 hrs Warranty: Lifetime Wattage: 12W Document Brochure Specification Sheet Installation Compatible Dimmers

Description The RA4-12 is a 12 watt 4" round gimbal recessed light fixture for retrofit application. It is a high-performance, easy to install downlight solution that offers good light output, energy-efficiency and streamlined design. Suitable for wet locations. Features Durable airtight aluminum body with adjustable gimbal. Includes Anodized blue heat sink to provide maximum airflow for the LED light source This general application light fixture features a 12 watt LED module that maintains uniform intensity producing up to 1015 lumens, with a typical CRI of 90. 100%-10% dimming capability. Compatible with industry standard TRIAC/ELV dimmers. The lens provides 40° beam spread Includes two spring loaded clips to attached to any ceiling material Extruded aluminum hardwire box with 300mA dimmable class II electronic LED driver with 100-135V AC input. Includes an 18" FT6 rated cable with DC 2.1 connector between driver and fixture approved for use in plenums and suspended ceilings Three "quick connect" push-in terminals for fast and easy wiring Operating temperature of -20°C to 40°C (-4°F to 104°F) Suitable for wet locations Approved for direct contact with insulation Technical Information Application: Ceiling Recess Mount Approved Location: Wet / Insulated Ceilings Beam Angle: 40° CCT: 3000K Certification: cETLus Class II: Yes Color:White CRI: 90 Dimming: Yes Dimming Tech: Forward/reverse-phase, TRIAC/ELV Energy Star: Yes Hole Cut: Ø 4¼ " (108mm) Input: 100-135V AC, 60Hz Lumens: 1015 Lumens per Watt: 83 Power Factor: 0.95 Projected Life: 70% @ 50,000 hrs Warranty: Lifetime Wattage: 12W Document Brochure Installation Specification Sheet Compatible Dimmers

Description The RA4-12 is a 12 watt 4" round gimbal recessed light fixture for retrofit application. It is a high-performance, easy to install downlight solution that offers good light output, energy-efficiency and streamlined design. Suitable for wet locations. Features Durable airtight aluminum body with adjustable gimbal. Includes Anodized blue heat sink to provide maximum airflow for the LED light source This general application light fixture features a 12 watt LED module that maintains uniform intensity producing up to 840 lumens, with a typical CRI of 90. Selectable color, from 2700k to 5000k 100%-10% dimming capability. Compatible with industry standard TRIAC/ELV dimmers. The lens provides 40° beam spread Includes two spring loaded clips to attached to any ceiling material Extruded aluminum hardwire box with 300mA dimmable class II electronic LED driver with 100-135V AC input. Includes an 18" FT6 rated cable with DC 2.1 connector between driver and fixture approved for use in plenums and suspended ceilings Three "quick connect" push-in terminals for fast and easy wiring Operating temperature of -20°C to 40°C (-4°F to 104°F) Suitable for wet locations Approved for direct contact with insulation Technical Information Application: Ceiling Recess Mount Approved Location: Wet / Insulated Ceilings Beam Angle: 40° CCT (color selectable): 2700 K / 3000 K / 3500 K / 4000 K / 5000 K Certification: cETLus Class II: Yes Color:White CRI: 90 Dimming: Yes Dimming Tech: Forward/reverse-phase, TRIAC/ELV Energy Star: Yes Hole Cut: Ø 4¼ " (108mm) Input: 100-135V AC, 60Hz Lumens: Up to 840 Lumens per Watt: Up to 71 Power Factor: 0.9 Projected Life: 70% @ 50,000 hrs Warranty: Lifetime Wattage: 12W Document Brochure Installation Specification Sheet Compatible Dimmers

Description Leviton offers a variety of keyless lampholders for your everyday use. This keyless lampholder is resilient and long lasting, made out of aluminum. Perfect for closets, basements, a crawl space or utility room. Technical Information 660W, 600V Keyless One-piece

Description The SlimLED you know and love is now available with a 5-position CCT selectable switch. Adjustable from below the ceiling, simply remove the faceplate, select your color temperature, then magnetically snap on one of the trim options. Features Durable airtight aluminum body with UV stable paint and white PMMA diffuser lens for low glare. Includes silicone gasket for wet location applications. Includes a white magnetic trim This general application light fixture features a 16 watt LED module that maintains uniform intensity producing up to 1150 lumens; with typical CRI of 90. Available with 5 step CCT switch (2700K, 3000K, 3500K, 4000K and 5000K) 100%-10% dimming capability. This fixture is compatible with industry standard TRIAC/ELV dimmers. Provides 110° beam spread Includes two spring loaded clips to attached to any ceiling material. The slim profile allows to be mounted under joists or duct work. Extruded aluminum hardwire box with 300mA dimmable class II electronic LED driver with 100-135V AC input. Includes an 18" plenum rated FT6 wire with DC 2.1 connector from driver to fixture. "Quick connect" push-in terminals for fast and easy wiring Operating temperature from -30°C to 40°C (-°22F to 104°F) Suitable for wet locations and for insulated ceiling applications Technical Information Application: Ceiling Recessed Mount Approved Location: Wet / Insulated Ceilings Beam Angle: 110° CCT: 2700 K / 3000 K / 3500 K / 4000 K / 5000 K Certification: cETLus Color: WH CRI: 90 Dimming: Yes Dimming Tech: Forward/Reverse phase / TRIAC/ELV Energy Star: Yes Hole Cut : Ø 6¼ " (159mm) Input: 100-135V AC, 60Hz LM79: Yes LM80: Yes Lumens: Up to 1150 Lumens per Watt: Up to 74 Power Factor: 0.9 Projected Life: 70% @ 50,000 hrs Title 24: JA8 (up to 4000 K) Warranty: Lifetime Wattage: 16W Document Brochure Installation

Description The RA35-12RG is a 12 watt 3.5" round regressed gimbal recessed light fixture for retrofit application. It is a high-performance, easy to install downlight solution that offers good light output, energy-efficiency and streamlined design. Suitable for damp locations. Features Durable airtight aluminum body with adjustable gimbal. Includes anodized blue heat sink to provide maximum airflow for the LED light source. This general application light fixture features a 12 watts LED module that maintains uniform intensity producing up to 560 Lumens; with a typical CRI of 90. Color temperature dimming from 3000 K to 2000 K. This fixture is compatible with industry standard forward-phase / reverse-phase and TRIAC/ELV dimmers 100%-10% dimming capability. This fixture is compatible with industry standard TRIAC/ELV dimmers (See specification sheet for listing of compatible dimmers) The fixture lens provides 38° beam spread. Includes two spring loaded clips to attached to any ceiling material Extruded aluminum hardwire box with 300mA dimmable class II electronic LED driver with 100-135V AC input. Includes an 16" cable from driver to fixture. Three "Quick connect" push-in terminals for fast and easy wiring. Operating temperature range from -20°C to 40°C (-4°F to 104°F) Suitable for wet locations and suitable for insulated ceiling applications. Approved for direct contact with insulation. Airtight Technical Information Application: Ceiling Recess Mount Approved Location: Wet / Insulated Ceilings Beam Angle: 38° CCT: 3000 K~2000 K Certification: cETLus Class II: Yes Color: White CRI: 90+ Dimming: Yes Dimming Tech: Forward/reverse-phase - TRIAC/ELV Hole Cut: Ø 35⁄8" (92mm) Input: 100-135V AC, 60Hz Lumens: 700 Lumens per Watt: 64 Power Factor: >0.90 Projected Life: 70% @ 33,000 hrs Warranty: Lifetime Wattage: 12W Document Brochure Installation instruction Compatible Dimmers Specification Sheet

Description Full color and white tuning is now available on the classic SlimLED style. Plus, trims can be magnetically interchanged on site after installation to match your style. If you're updating a room, this 4-pack kit with a Room Controller is perfect, so you can turn the lights on/off, dim, change the white, or select through the 4-favorite modes all from the wall. Features Durable airtight aluminum body with UV stable paint and white PMMA diffuser lens for low glare. Includes silicone gasket for wet location applications Includes white and black interchangeable magnetic trims This general application light fixture features a 12 watt LED module that maintains uniform intensity producing up to 800 lumens, with a typical CRI of 90. RGB and tunable White (2700 K to 5000 K) 100%-10% Wi-Fi dimming capability. Dimming controlled via the WiZ App and Room Controller Lens provides 110° beam spread Includes two spring loaded clips to attached to any ceiling material Extruded aluminum hardwire box with 300mA Wi-Fi dimmable LED driver with 100-135V AC input. Includes an 18" wire with 6-pin DC connector between driver and fixture Can be controlled via the WiZ App (Works with iOS and Android) from anywhere. Voice control can also be achieved by integrating the app with most smart speakers. Works with Google Assistant, Siri, Alexa and IFTTT. "Quick connect" push-in terminals in hardwire box for fast and easy wiring Minimum starting temperature of -40°C (-40°F) Suitable for wet locations, indoor or outdoor Approved for direct contact with insulation Technical Information Application: Ceiling Recess Mount Approved Location: Wet / Insulated Ceilings / Indoor / Outdoor Beam Angle: 110° CCT: RGB + Tunable White (2700 K - 5000 K) Certification: cETLus Class II: Yes Color: White and Black trims included CRI: 90 Dimming: Yes Dimming Tech: Wi-Fi Dimming (via WiZ App) Hole Cut: Ø 4¼ " (108mm) Input: 100-135V AC, 60Hz Lumens: up to 800 Lumens per Watt: Up to 76 Power Factor: >0.9 Projected Life: 70% @ 50,000 hrs Warranty: 3-Year Wattage: 12W Document Specification Sheet Installation

Description The RA3-7G is a 7 watt 3" gimbal recessed light fixture for retrofit application. It is a high-performance, easy to install downlight solution that offers good light output, energy-efficiency and streamlined design. Suitable for wet locations. Features Durable airtight aluminum body with adjustable gimbal. Includes anodized blue heat sink to provide maximum airflow for the LED light source. This general application light fixture features a 7 watts LED module that maintains uniform intensity producing up to 650 Lumens; with a typical CRI of 90. 100%-10% dimming capability. This fixture is compatible with industry standard TRIAC/ELV dimmers (See specification sheet for listing of compatible dimmers) The fixture lens provides 45° beam spread. Includes two spring loaded clips to attached to any ceiling material Extruded aluminum hardwire box with 170mA dimmable class II electronic LED driver with 100-135V AC input. Includes an 18" cable from driver to fixture. Three "Quick connect" push-in terminals for fast and easy wiring. Operating temperature range from -20°C to 40°C (-4°F to 104°F) Suitable for wet locations and suitable for insulated ceiling applications. Technical Information Application: Ceiling Recess Mount Approved Location: Wet / Insulated Ceilings Beam Angle: 45° CCT: 3000 K Certification: cETLus Class II: Yes Colour: White CRI: 90 Dimming: Yes Dimming Tech: TRIAC/ELV Energy Star: Yes Hole Cut: Ø 2¾ " (70mm) Input: 100-135V AC, 60Hz LM79: Yes LM80: Yes Lumens: 570 Lumens per Watt: 75 Power Factor: 0.95 Projected Life: 70% @ 36,000 hrs Warranty: Lifetime Wattage: 7W Document Specification Sheet Compatible Dimmers Installation

Description The RA4-12 is a 12 watt 4" round gimbal recessed light fixture for retrofit application. It is a high-performance, easy to install downlight solution that offers good light output, energy-efficiency and streamlined design. Suitable for wet locations. Features Durable airtight aluminum body with adjustable gimbal. Includes Anodized blue heat sink to provide maximum airflow for the LED light source This general application light fixture features a 12 watt LED module that maintains uniform intensity producing up to 840 lumens, with a typical CRI of 90. Selectable color, from 2700k to 5000k 100%-10% dimming capability. Compatible with industry standard TRIAC/ELV dimmers. The lens provides 40° beam spread Includes two spring loaded clips to attached to any ceiling material Extruded aluminum hardwire box with 300mA dimmable class II electronic LED driver with 100-135V AC input. Includes an 18" FT6 rated cable with DC 2.1 connector between driver and fixture approved for use in plenums and suspended ceilings Three "quick connect" push-in terminals for fast and easy wiring Operating temperature of -20°C to 40°C (-4°F to 104°F) Suitable for wet locations Approved for direct contact with insulation Technical Information Application: Ceiling Recess Mount Approved Location: Wet / Insulated Ceilings Beam Angle: 40° CCT (color selectable): 2700 K / 3000 K / 3500 K / 4000 K / 5000 K Certification: cETLus Class II: Yes Color: Black CRI: 90 Dimming: Yes Dimming Tech: Forward/reverse-phase, TRIAC/ELV Energy Star: Yes Hole Cut: Ø 4¼ " (108mm) Input: 100-135V AC, 60Hz Lumens: Up to 840 Lumens per Watt: Up to 71 Power Factor: 0.9 Projected Life: 70% @ 50,000 hrs Warranty: Lifetime Wattage: 12W Document Brochure Installation Specification Sheet Compatible Dimmers

Description Full color and white tuning is now available on the classic SlimLED style. Plus, trims can be magnetically interchanged on site after installation to match your style. If you're updating a room, you can also get the SlimLED OnCloud in a 4-pack kit with a Room Controller so you can turn the lights on/off, dim, change the white, or select through the 4-favorite modes all from the wall. Features Durable airtight aluminum body with UV stable paint and white PMMA diffuser lens for low glare. Includes silicone gasket for wet location applications Includes white and black interchangeable magnetic trims This general application light fixture features a 12 watt LED module that maintains uniform intensity producing up to 800 lumens, with a typical CRI of 90. RGB and tunable White (2700 K to 5000 K) 100%-10% Wi-Fi dimming capability. Dimming controlled via the WiZ App and Room Controller Lens provides 110° beam spread Includes two spring loaded clips to attached to any ceiling material Extruded aluminum hardwire box with 300mA Wi-Fi dimmable LED driver with 100-135V AC input. Includes an 18" wire with 6-pin DC connector between driver and fixture Can be controlled via the WiZ App (Works with iOS and Android) from anywhere. Voice control can also be achieved by integrating the app with most smart speakers. Works with Google Assistant, Siri, Alexa and IFTTT. "Quick connect" push-in terminals in hardwire box for fast and easy wiring Minimum starting temperature of -40°C (-40°F) Suitable for wet locations, indoor or outdoor Approved for direct contact with insulation Technical Information Application: Ceiling Recess Mount Approved Location: Wet / Insulated Ceilings / Indoor / Outdoor Beam Angle: 110° CCT: RGB + Tunable White (2700 K - 5000 K) Certification: cETLus Class II: Yes Color: White trim included CRI: 90 Dimming: Yes Dimming Tech: Wi-Fi Dimming (via WiZ App) Hole Cut: Ø 4¼ " (108mm) Input: 100-135V AC, 60Hz Lumens: up to 800 Lumens per Watt: Up to 76 Power Factor: >0.9 Projected Life: 70% @ 50,000 hrs Warranty: 3-Year Wattage: 12W Document Specification Sheet Installation

Description Leviton LED Ceiling Lampholders are the ideal lighting source for closets, workrooms, basements, storage areas, utility rooms, attics and other closed-in spaces. These lampholders come with a GU24 base, that supports new CFL and LED lamps. Designed for an easy installation, this utility lampholder features pigtails leads. Benefits GU24 LED Lamp and Guard 10W-120VAC, 60Hz Energy Star Qualified 25,000 hour bulb life Turns on and off with a wall switch Indoor Use Only Technical Information Lamp Output: 900 lumens Lamp Color: 3000K Soft White Average Lamp: Life 25,000 hours

Description Round Brushed Nickel trim for the SlimLED fixtures. ***Trim only Document Brochure Spec Sheet

Description The RA35-12G is a 12 watt 3.5" round gimbal recessed light fixture for retrofit application. It is a high-performance, easy to install residential grade downlight solution that offers good light output, energy-efficiency and streamlined design. Suitable for damp locations. Features Durable airtight aluminum body with adjustable gimbal. Includes anodized blue heat sink to provide maximum airflow for the LED light source. This general application light fixture features a 12 watts LED module that maintains uniform intensity producing up to 950 Lumens; with a typical CRI of 90. 100%-10% dimming capability. This fixture is compatible with industry standard TRIAC/ELV dimmers (See specification sheet for listing of compatible dimmers) The fixture lens provides 40° beam spread. Includes two spring loaded clips to attached to any ceiling material Extruded aluminum hardwire box with 300mA dimmable class II electronic LED driver with 100-135V AC input. Includes an 16" cable from driver to fixture. Three "Quick connect" push-in terminals for fast and easy wiring. Operating temperature range from -20°C to 40°C (-4°F to 104°F) Suitable for damp locations. Approved for direct contact with insulation. Technical Information Application: Ceiling Recess Mount Approved Location: Wet / Insulated Ceilings Beam Angle: 38° CCT (color selectable): 2700 K / 3000 K / 3500 K / 4000 K / 5000 K Certification: cETLus Class II: Yes Color: Black CRI: 90+ Dimming: Yes Dimming Tech: Forward/reverse-phase, TRIAC/ELV Energy Star: Yes Hole Cut: Ø 35⁄8" (92mm) Input: 100-135V AC, 60Hz Lumens: Up to 850 Lumens per Watt: Up to 78 Power Factor: >0.90 Projected Life: 70% @ 50,000 hrs Warranty: Lifetime Wattage: 12W Document Brochure Specification Sheet Compatible Dimmers Instruction

Description The RA3-7G is a 7 watt 3" gimbal recessed light fixture for retrofit application. It is a high-performance, easy to install downlight solution that offers good light output, energy-efficiency and streamlined design. Suitable for wet locations. Features Durable airtight aluminum body with adjustable gimbal. Includes anodized blue heat sink to provide maximum airflow for the LED light source. This general application light fixture features a 7 watts LED module that maintains uniform intensity producing up to 650 Lumens; with a typical CRI of 90. 100%-10% dimming capability. This fixture is compatible with industry standard TRIAC/ELV dimmers (See specification sheet for listing of compatible dimmers) The fixture lens provides 45° beam spread. Includes two spring loaded clips to attached to any ceiling material Extruded aluminum hardwire box with 170mA dimmable class II electronic LED driver with 100-135V AC input. Includes an 18" cable from driver to fixture. Three "Quick connect" push-in terminals for fast and easy wiring. Operating temperature range from -20°C to 40°C (-4°F to 104°F) Suitable for wet locations and suitable for insulated ceiling applications. Technical Information Application: Ceiling Recess Mount Approved Location: Wet / Insulated Ceilings Beam Angle: 45° CCT: 3000 K Certification: cETLus Class II: Yes Colour: Brushed Nickel CRI: 90 Dimming: Yes Dimming Tech: TRIAC/ELV Energy Star: Yes Hole Cut: Ø 2¾ " (70mm) Input: 100-135V AC, 60Hz LM79: Yes LM80: Yes Lumens: 570 Lumens per Watt: 75 Power Factor: 0.95 Projected Life: 70% @ 36,000 hrs Warranty: Lifetime Wattage: 7W Document Specification Sheet Compatible Dimmers Installation

Description The RA3-7G is a 7 watt 3" gimbal recessed light fixture for retrofit application. It is a high-performance, easy to install downlight solution that offers good light output, energy-efficiency and streamlined design. Suitable for wet locations. Features Durable airtight aluminum body with adjustable gimbal. Includes anodized blue heat sink to provide maximum airflow for the LED light source. This general application light fixture features a 7 watts LED module that maintains uniform intensity producing up to 650 Lumens; with a typical CRI of 90. 100%-10% dimming capability. This fixture is compatible with industry standard TRIAC/ELV dimmers (See specification sheet for listing of compatible dimmers) The fixture lens provides 45° beam spread. Includes two spring loaded clips to attached to any ceiling material Extruded aluminum hardwire box with 170mA dimmable class II electronic LED driver with 100-135V AC input. Includes an 18" cable from driver to fixture. Three "Quick connect" push-in terminals for fast and easy wiring. Operating temperature range from -20°C to 40°C (-4°F to 104°F) Suitable for wet locations and suitable for insulated ceiling applications. Technical Information Application: Ceiling Recess Mount Approved Location: Wet / Insulated Ceilings Beam Angle: 45° CCT: 3000 K Certification: cETLus Class II: Yes Colour: Black CRI: 90 Dimming: Yes Dimming Tech: TRIAC/ELV Energy Star: Yes Hole Cut: Ø 2¾ " (70mm) Input: 100-135V AC, 60Hz LM79: Yes LM80: Yes Lumens: 570 Lumens per Watt: 75 Power Factor: 0.95 Projected Life: 70% @ 36,000 hrs Warranty: Lifetime Wattage: 7W Document Specification Sheet Compatible Dimmers Installation

Description The RA35-12RG is a 12 watt 3.5" round regressed gimbal recessed light fixture for retrofit application. It is a high-performance, easy to install downlight solution that offers good light output, energy-efficiency and streamlined design. Suitable for damp locations. Features Durable airtight aluminum body with adjustable gimbal. Includes anodized blue heat sink to provide maximum airflow for the LED light source. This general application light fixture features a 12 watts LED module that maintains uniform intensity producing up to 680 Lumens; with a typical CRI of 90. On-fixture color selectable switch allows switching between 2700 K, 3000 K, 3500 K, 4000 K and 5000 K color temperatures. 100%-10% dimming capability. This fixture is compatible with industry standard TRIAC/ELV dimmers (See specification sheet for listing of compatible dimmers) The fixture lens provides 38° beam spread. Includes two spring loaded clips to attached to any ceiling material Extruded aluminum hardwire box with 300mA dimmable class II electronic LED driver with 100-135V AC input. Includes an 16" cable from driver to fixture. Three "Quick connect" push-in terminals for fast and easy wiring. Operating temperature range from -20°C to 40°C (-4°F to 104°F) Suitable for wet locations and suitable for insulated ceiling applications. Approved for direct contact with insulation. Airtight Technical Information Application: Ceiling Recess Mount Approved Location: Wet / Insulated Ceilings Beam Angle: 38° CCT (color selectable) 2700 K / 3000 K / 3500 K / 4000 K / 5000 K Certification: cETLus Class II: Yes Color: Black CRI: 90+ Dimming: Yes Dimming Tech: Forward/reverse-phase - TRIAC/ELV Energy Star: Yes Hole Cut: Ø 35⁄8" (92mm) Input: 100-135V AC, 60Hz Lumens: Up to 850 Lumens per Watt: Up to 78 Power Factor: >0.90 Projected Life: 70% @ 50,000 hrs Warranty: Lifetime Wattage: 12W Document Brochure Installation instruction Compatible Dimmers Specification Sheet

Description The SYLVANIA LED Gimbal maximizes the energy savings of LED technology. Boasting a five year warranty, the LED Gimbal Luminaire is ideal in many retail, office, education, and low-bay applications. Benefits Integrated white trim, gimbal smooth reflector, socket adaptor, and airtight ring (included) No warm up time, instant on with full light and consistent lamp to lamp color Beam angle 110° Up to 90 LPW 5 CCT selectable (2700K, 3000K, 3500K, 4000K, 5000K) CRI >90 Offered in 8 and 10 watts Uniform, glare free illumination distribution Energy savings up to 88% Technical Information Power (w): 8w Base Type: Screw Base Replaces: 65w Input Voltage: 120V Average Life (hrs): 50 000 hours Typical Lumens (lm): 700 lm CCT: 2700K/3000K/3500K/4000K/5000K CRI: >90 Power Factor: >90 Bulb Finish: Frosted Ambient Operating Range: -4°F to 104°F (-20°C to 40°C) Warranty: 5 Years

Description ORBIT is a 4" adjustable downlight that allows for easy directionality to precisely aim light in almost any direction. With 80-degree tilting and 360-degree rotation this 9 watt fixture is perfect for creating a seamless look throughout your space. Perfect for sloped ceilings with a steep roof pitch, and this fixture can adjust to shine straight down. Features Body Durable aluminum body with 360° rotation and 80° tilting. LED Characteristics This general application light fixture features a 9 watt LED module that maintains uniform intensity producing up to 750 lumens; with a typical CRI of 90. With a CCT range of 2700 K - 5000 K color temperature. Dimming 100%-10% dimming capability. This fixture is compatible with industry standard TRIAC/ELV dimmers. For compatible dimmers, visit www.liteline.com/Orbit . Beam Spread The fixture lens provides 36° beam spread. Mounting Includes two spring loaded clips to attach to any ceiling material. LED Driver Extruded aluminum hardwire box with 210mA dimmable class II electronic LED driver with 100-135V, 60Hz AC input. Includes an 15" FT6 rated cable with 3-pin DC connector between driver and fixture approved for use in plenums and suspended ceilings. Includes 5 position CCT switch. Quick Connect Push-in Terminals Three "Quick connect" push-in terminals for fast and easy wiring. Operating Temperature -40°C~40°C (-40°F~104°F) Environment Suitable for wet locations. Approved for direct contact with insulation. Airtight Indoor / Outdoor rated. Technical Information Application: Ceiling Recess Mount Approved Location: Wet / Insulated Ceilings Beam Angle: 36° CCT: 2700 K / 3000 K / 3500 K / 4000 K / 5000 K Certification: cETLus Class II: Yes Color: Black CRI: 90+ Dimming: Yes Dimming Tech: TRIAC/ELV Energy Star: Yes Hole Cut Ø: 4¼ " (108mm) Input: 100-135V AC, 60Hz LM79: Yes LM80: Yes Lumens: Up to 875 Lumens per Watt: Up to 100 Power Factor: 0.95 Projected Life: 70% @ 50,000 hrs Title 24: Yes Warranty: Lifetime Wattage: 9W CCT Lumens: 2700 K - 785 Lumens 3000 K - 815 Lumens 3500 K - 860 Lumens 4000 K - 875 Lumens 5000 K - 815 Lumens Document Specification Sheet Brochure Compatible Dimmer Instruction

Description Slim LED Ceiling light with occupancy sensor that automatically detects motion & turns light On & Off. Installs in 60 seconds. Features Contemporary low profile design Easy to install in 60 seconds to existing recessed junction box Mounts flush to ceiling for indoor or outdoor applications Delivers 1000+ lumens replacing up to 100W incandescent lamp. Die cast aluminum housing with polycarbonate lens. Rated for damp locations Meets NFPA 70, NEC section 410.16, C (1) Requirements. Technical Information Model: SPLRP-LED (with Sensor) Watts: 12 Lumens: 1037 Voltage: 120V Replaces Up To: 100W Incandescent Lamp Colour Temp: 4000K Finish: White Lighting Controls: Sensor set to leave light on for 3 minutes of inactivity Certifications: Energy Star, cETLus, Approved for Damp Locations, Easy Install Warranty: 5 Years Document Spec sheet

Description Dals' flush mounts incorporate Edge-Lit technology, eliminating hot spots or glare. Can be installed inside or outside and offer 5 switch-selectable CCT settings – 2700 K, 3000 K, 3500 K, 4000 K, and 5000 K. Features Integrated dimmable driver Over 50,000 hours of service life Switch-selectable CCT: 2700 K/ 3000 K/ 3500 K/ 4000 K/ 5000 K in canopy Superior LED performance and lifespan Smooth 360° wide spread Minimal heat emission Frosted lens Edge-lit technology Cast aluminum construction Suitable for outdoor locations on covered ceilings only JA8 certified Ideal operating temperature: -20° to 40° C 5-year warranty Technical Information Finish: Gold Wiring: Hardwire Dimming: TRIAC Recommended Dimmers: See spec sheet in document tab for recommended dimmers Watts: 11W Delivered Lumen: 700lm LED Lumens: 750 lm CRI: 90+ Beam Angle: 110° Color Temperature: 2700K, 3000K, 3500K, 4000K, 5000K Voltage: 120V IP Rating: IP44 Rating: Wet Location: Indoor/Outdoor Smart: No Dimensions: Ø10" x 1" Lifetime: 50000H Warranty: 5 year Limited Document Spec sheet and recommended dimmers Brochure Instruction

Description ORBIT is a 4" adjustable downlight that allows for easy directionality to precisely aim light in almost any direction. With 80-degree tilting and 360-degree rotation this 9 watt fixture is perfect for creating a seamless look throughout your space. Perfect for sloped ceilings with a steep roof pitch, and this fixture can adjust to shine straight down. Features Body Durable aluminum body with 360° rotation and 80° tilting. LED Characteristics This general application light fixture features a 9 watt LED module that maintains uniform intensity producing up to 750 lumens; with a typical CRI of 90. With a CCT range of 2700 K - 5000 K color temperature. Dimming 100%-10% dimming capability. This fixture is compatible with industry standard TRIAC/ELV dimmers. For compatible dimmers, visit www.liteline.com/Orbit . Beam Spread The fixture lens provides 36° beam spread. Mounting Includes two spring loaded clips to attach to any ceiling material. LED Driver Extruded aluminum hardwire box with 210mA dimmable class II electronic LED driver with 100-135V, 60Hz AC input. Includes an 15" FT6 rated cable with 3-pin DC connector between driver and fixture approved for use in plenums and suspended ceilings. Includes 5 position CCT switch. Quick Connect Push-in Terminals Three "Quick connect" push-in terminals for fast and easy wiring. Operating Temperature -40°C~40°C (-40°F~104°F) Environment Suitable for wet locations. Approved for direct contact with insulation. Airtight Indoor / Outdoor rated. Technical Information Application: Ceiling Recess Mount Approved Location: Wet / Insulated Ceilings Beam Angle: 36° CCT: 2700 K / 3000 K / 3500 K / 4000 K / 5000 K Certification: cETLus Class II: Yes Color: White CRI: 90+ Dimming: Yes Dimming Tech: TRIAC/ELV Energy Star: Yes Hole Cut Ø: 4¼ " (108mm) Input: 100-135V AC, 60Hz LM79: Yes LM80: Yes Lumens: Up to 875 Lumens per Watt: Up to 100 Power Factor: 0.95 Projected Life: 70% @ 50,000 hrs Title 24: Yes Warranty: Lifetime Wattage: 9W CCT Lumens: 2700 K - 785 Lumens 3000 K - 815 Lumens 3500 K - 860 Lumens 4000 K - 875 Lumens 5000 K - 815 Lumens Document Specification Sheet Brochure Compatible Dimmer Instruction