Fluke

Description The Fluke 2AC is the latest addition to the VoltAlert™ AC non-contact voltage tester family. It is designed to be pocket-sized and easy to use. The tip of the pocket-sized tester will glow red when within close proximity of an outlet, terminal strip, or power cord where voltage is present. The 2 AC is always on, with a battery check function to make sure the tester is working properly. * * Use of Battery Check function is optional and for convenience only, it is not intended as a substitute for checking the unit on a known live source before and after use. Features Non-contact voltage detection from 90 to 1000 V AC Innovative 'Battery Check' ensures battery is in good condition* Integrated clip design, optimized for pocket storage CAT IV 1000 V overvoltage rated product for best in class user protection Suitable for a wide range of residential, commercial and industrial needs Fluke ruggedness and reliability with a two-year warranty Technical Information Specifications Operating Principles Senses the steady state electrostatic field produced by AC voltage through insulation without requiring contact to the bare conductor. A red glow at the tip indicates the presence of voltage. Safety Compliance Meets IEC 61010-1:2001, UL 61010-1 (2nd ed.), CAN/CSA-C22.2 No. 61010-1-04, and ISA-82.02.01 Pollution Degree 2 EMC Compliance Meets IEC 61326-1:2006 Operating 90 V AC to 1000 V AC, CAT IV 1000 V rated Temperature (Operating and Storage) -10°C to 50°C (-14°F to 122°F) Operating Humidity Ranges 0% to 95% (0°C to 30°C) 0% to 75% (30°C to 40°C) 0% to 45% (40°C to 55°C) Altitude 2000 m (CAT IV 1000 V) Cleaning Clean with damp cloth Battery Life Typical battery life of greater than one year Warranty Period Two years Document Datasheet Instruction Manual

Description The Fluke TPAK ToolPak™ Magnetic Meter Hanger allows you to hang your meter on nails, hooks, and pipes so you can take hands-free measurements. Always demand the best; use the original TPAK Meter hanging kit with its unique rare-earth magnet for superior gripping strength to ensure your tools don’t slide or fall. Hang your meter in a variety of ways for convenient hands-free operation, solve any hanging and positioning problems you may face. Use the hook and loop strap to wrap around a pole or pipe and hang your meter. Use the magnet to throw your meter on a panel door while you work the test leads to take a measurement quickly and safely. What's in the box: 9-inch hook and loop strap Tapered hook and loop strap Universal hanger clip Hook hanger for non-magnetic surfaces Strong magnet Features Strong, rare-earth magnet hanger strap with Fluke durability Hang with magnet or hook strap for non-magnetic surfaces Solves any hanging and positioning problem you may face Easily work hands-free Document Datasheet