Orka Clearance

Description The Klein Tools' 240-Foot High Carbon Steel Fish Tape is perfect for wire runs associated with commercial, residential and voice-data-video installations. The optimized housing and handle design decreases payout effort and reduces binding. A multiple-position handle allows for a firm, steady grip as you pull or rewind the tape. The unique interior case shape combines the leverage of square cases and the comfort of round cases, which makes rewinding tape after a long run easier. The tape features laser-etched descending markings placed at every foot. These markings allow you to accurately measure the depth of conduit runs and determine the amount of tape left to pay out. Benefits Durable, high-carbon strength 1/8-Inch wide steel fish tapes are firm yet flexible for long runs and large wire pulls Case design decreases payout effort and friction by optimizing the tape payout angle Slip-resistant housing geometry improves winding power and reduces binding Multi-position handle gives you a firm, steady grip as you pull or rewind tape from the case Descending laser etched markings in 1-Foot (0.3 m) increments allow you to more accurately measure conduit runs and the amount of tape left to pay out Protective coating on the steel tape reduces corrosion from non-contact moisture and humidity Polypropylene case and handle offer high impact resistance U.S. Patents: 8164025; 8168921; 8212178; 9895773; 10099316 Technical Information Type: Steel Fish Tape Application: Wire Pulling Special Features: Optimized Housing Design, High Carbon Steel Overall Length: 1.85'' (4.7 cm) Overall Height: 16.21'' (41.2 cm) Overall Width: 12.35'' (31.4 cm) Material: Steel Color: Orange/Black Tape Size: 240.0' x 0.125'' x 0.062'' (73.2 m x 0.3 cm x 0.2 cm) Diameter: 13'' (33 cm) Tape End: Double Loop Weight: 7.9 lb (3.6 kg) Document Brochure Instructions

Description Delivers up to 2X more runtime, 20% more power and 2X more recharges than standard lithium-ion batteries. The M18™ REDLITHIUM™ XC 4.0 Extended Capacity Battery Pack features superior pack construction, electronics and performance to deliver more work per charge and more work over pack life than any battery on the market. It offers 4.0 amp-hours of runtime. With Milwaukee durability built into each pack, this battery runs cooler and performs in climates below 0°F/-18°C. Managed by Milwaukee’s exclusive REDLINK™ Intelligence, the battery features overload protection to prevent you from damaging your cordless power tools in heavy-duty situations, while the discharge protection prevents cell damage. The temperature management system and individual cell monitoring help maximize battery life. Switch to the REDLITHIUM 4.0 XC Extended Battery Pack to instantly upgrade the runtime and durability of your Milwaukee M18 cordless tools. Benefits REDLINK™ Intelligence: Provides optimized performance and overload protection using total system communication between tool, battery and charger Best-in-class construction: Offers long-lasting performance and durability Fuel gauge onboard: Displays remaining runtime for less downtime on the job All-weather performance: Delivers fade-free power in extreme jobsite conditions Versatility: Powers more than 40 Milwaukee M18™ cordless power tools Technical Information Voltage: 18V Battery System: M18 Warranty: 3 Year Limited Warranty Document Operator Manual

Description Use the combination drill/tap bit to complete hole drilling, tapping and deburring/countersinking tasks with your power drill. The bit is made of hardened high-speed steel for durability. Benefits Complete hole drilling, tapping and deburring/countersinking in one operation with power drill saves labor and time Back tapered beyond tap to prevent thread damage from over-drilling Deburr/countersink also provided on bit beyond back taper Made from hardened high-speed steel vs. carbon steel for longer life High quality hex shank to ensure strong connection to drill chuck Designed to tap up to 10-gauge metal Quick change adaptor included in both metric and standard kits Technical Information Brand: Greenlee Material thickness: 10 gauge Material type: mild steel, copper, brass, aluminum Shank: 1/4" quick change hex Drill Material: hardened high speed steel Drill point: split point with web thinning Size: 8-32NC

Description The M18 FUEL™ blower has the power to clear from 15 ft, gets to full throttle in under 1 second, and is up to 4 lbs lighter than competitors. Designed to meet landscape maintenance professional needs, the POWERSTATE™ brushless motor and REDLITHIUM™ HIGH DEMAND™ 9.0 battery (sold separately) deliver 450 CFM and 120 mph output. The blower features a variable speed trigger and high/low speed settings for increased control. The high setting is for the most demanding applications and low is optimized for clearing debris from flower beds without moving mulch. The lock on button allows the blower to be locked on to full throttle, so the operating hand can be relaxed reducing fatigue. The M18 FUEL™ blower is fully compatible with 150+ solutions on the M18™ system. Benefits Power to Clear From 15' Full Throttle In Under 1 Second Up to 4 lbs. Lighter POWERSTATE™ Brushless Motor: Delivers more power under load and longer motor life REDLINK PLUS™ Intelligence: Provides optimized performance and overload protection using total system communication between tool, battery and charger M18™ REDLITHIUM™ HIGH OUTPUT™ XC8.0 Battery Pack: Provides 50% more power and runs 50% cooler vs. M18™ REDLITHIUM™ XC Battery Packs Maximum Air Volume: 450 CFM Maximum Air Speed: 120 MPH Lock On Button: Yes High/Low Speed Settings Technical Information Height: 9.7" Length: 33.8" Weight: 4.9 lbs Width: 5.87" Power Source: Cordless Compatible Batteries: All M18™ Batteries Compatible Chargers: 48-59-1812, 48-59-1806, 48-59-1807, 48-59-1808, 48-59-1810 Battery System: M18 Document Operator's Manual

Description Add hands-free control to the lists of Caseta lighting control options. Lutrons' vacancy smart motion sensor is a wireless, battery-operated, passive infrared (PIR) sensor that automatically controls lights via RF communication to compatible dimming or switching devices. These sensors detect the heat from people moving within an area to determine when the space is occupied. Combine both convenience and exceptional energy savings along with ease of installation with Lutron Caseta motion sensors. Benefits Vacancy sensor (Manual-on, Auto-off) Infrared motion detection with exclusive Lutron XCT Technology detects minor motion Vacancy model meets CA Title 24 requirements Timeout, Activity, and Auto-On settings available Easy Installation and accessible test buttons make setup easy Lens illuminates during test mode to verify ideal locations Multiple sensors can be added for extended coverage 180° field view For indoor use only. Perfect for bathrooms, laundry rooms, hallways, garages, and more – no wires required. 10-year battery life For use with Lutron Caseta products only Technical Information Specification sheet Specification sheet FR Regulatory Approvals: cULusR listed, FCC certified, IC certified, IFT certified, Meets CA (U.S.A.) Energy Commission Title 24 requirements Power/Performance: Operating voltage: 3 V- Operating current: 14 μA nominal Requires one CR 123 lithium battery Battery life: 10-year battery-life design Non-volatile memory (saved changes are stored during power loss) Temperature: 32 °F to 104 °F (0 °C to 40 °C) Relative humidity: less than 90% non-condensing RF Range: Distance between local load controls and sensor should not exceed 60 ft (18 m) line-of-sight or 30 ft (9 m) through walls 180° field of view: Minor motion = 15 x 2 x 35 = 1050 ft2 (97.5 m2), Major motion = 20 x 2 x 45 = 1800 ft2 (167.2 m2)

Description Ideal for indoor/outdoor industrial and commercial applications, RAB aluminum boxes are durable and weather resistant. Perfect for mounting weatherproof lights, sensors, and floods. Benefits Cast aluminum box with 5 X 3/4" threaded entries Each box has two opposing mounting feet, 4 internal posts for mounting covers and 2 additional posts for universal crossbars. All posts 10-24 tapped. Sandblasted aluminum finish is standard Includes: (1) Aluminum box (4) Threaded plugs, (1) Neoprene gasket, (1) ground screw, (2) brass cover screws, (1) stamped aluminum cover Technical Information Model #: 3/4DVXJ Knockouts: (5) 3/4" Material: Aluminum Colour: Sandblasted Aluminum Certifications: CSA and UL Documents Specification sheet

Description The Pocket Pal Tool Holster is the perfect accessory as it doubles your pocket capacity and it can also be fastened to the belt. It holds tools, radio, and phones, and protects pockets from tears. Benefits • Holds tools, radio, phone • Doubles pocket capacity • Protects pockets from tears • Can also be fastened to the belt Technical Information Brand: Ideal Colour: Blue Height: 6.5 inch Width: 4.75 inch Number of Pockets: 2

Description This Leather Tool pouch is handcrafted in Canada and offers an ergonomic compact design for superior support. It can be worn on a belt, with a shoulder strap or as a hand pouch. Benefits Features 12 individual tool pockets, a multi-purpose loop (holds a tape measure, etc), and an electrical tape-chain Conforms to the contours of your leg when worn on a belt, and features an extended base cap protects your leg from tool points Constructed with rust-resistant, plated-steel hardware and heavy, lock-stitched nylon thread for long-term durability Compact, ergonomic design for superior comfort Can be carried three ways - on a belt, with a shoulder strap, or as a hand-pouch Shoulder strap/belt sold separately Technical Information Brand: Ideal Colour: Beige Pockets: 12 Material: Standard Leather Dimensions: 6.5”W x 3”D x 13”H

Description These photocontrols are provided with a swivel arm for easy and flexible installation to standard outdoor light fixtures or electrical boxes. Features Mechanical bimetal switch with Cadmium Sulfide photocell Delay feature prevents unwanted OFF switching High strength, UV resistant plastic housing Swivel with 1⁄2"-14 NPSM threaded stem Washer gasket and locking nut included #18 AWG, 6" wire leads Technical Information Sensor Time Delay: 30 sec to 90 sec Photocell Type: Cadmium Sulfide Photo Control Switch Type: Mechanical Bimetal Fail Mode: ON Activation On: 1 to 5 fc Activation Off: 3 to 15 fc Photocontrol Type: Thermal Application Compatibilities: HID; Fluorescent; Incandescent Photocontrol Style: Stem and Swivel Mount Photocontrol Sensor Location: Side Product Height (in) :5 Product Height (mm): 139.7 Product Width (in): 1 9/16 Product Width (mm): 39.7 Product Depth (in): 1 9/16 Product Depth (mm): 39.7 Wire Lead Length (in): 6 Wire Lead Length (mm): 152 Wire Size Max: #18 AWG Cover Color: Gray Housing Material: Polycarbonate Load Ratings Magnetic Ballast Range(s): 8.3 A, 1000 VA Tungsten Range(s): 15 A, 1800 W Wiring Option: Wire leads Input Voltage Range(s): 120 VAC, 50/60 Hz Expected Lifetime (Years): 5 Expected Lifetime (Operations): 3650 Temperature (operation): -40°C..70°C Usage Environments: Outdoor Country of Origin (Intermatic): MEXICO Warranty Period: 2-Year limited Document Technical Sheet Instruction

Description Round Black trim for the SlimLED fixtures. ***Trim only Document Brochure Spec Sheet

Description Strip solid and stranded conductors with ease using the Greenlee 1916-SS Stainless-Steel Wire Stripper. In addition to stripping holes, this tool also features a serrated plier nose, a wire cutter and looping holes, allowing you to bend, pull and shape wire as needed. The tool is durably constructed from stainless steel and has a comfortable, nonslip grip. Benefits High grade stainless steel lasts 5X longer Precision ground stripping holes offer easy, consistent jacket removal Strips 10-20 AWG Solid and12-22 AWG Stranded conductors Multiple functions include plier nose, strippers, cutter, looping holes and spring back with low profile lock High grade knives resist chipping and marring Looping holes and serrated nose for bending, pulling and shaping wires Long-life spring and low-profile lock for quick, repetitive stripping and cutting Vinyl cushion grip resists slipping and has an ergonomic fit Technical Information Brand: Greenlee Application: Stripping and Cutting Wire Conductors Capacity: 10-20 AWG Solid, 12-22 AWG Stranded Finish: Laser etched and stamped feature indicators Handle Type: Vinyl Cushion Grip Jaw Type: Plier-type nose with precision ground stripping holes and cutter Material: High Grade Stainless Steel Length: 6" (157mm) Type: Manual Fixed Hole Stripper/Cutter w/ Spring and Lock Documents Brochure

Description The MILWAUKEE® M12 FUEL™ HATCHET™ 6" Pruning Saw Kit delivers unmatched control & access, has the power to cut 3" hardwoods, and delivers up to 120 cuts per charge. This electric pruning saw is designed to meet the ergonomic, performance, and durability needs of landscape maintenance professionals. Weighing less than 5 lbs and featuring a compact design, the cordless pruning saw provides increased control and maneuverability in tight access areas. The POWERSTATE™ Brushless Motor delivers the power to complete cuts in demanding hardwood materials. The REDLINK PLUS™ Intelligence enables full-circle communication between the tool and battery, which allows for unmatched levels of performance, protection, and productivity. The advanced electronic package also delivers an instant throttle response and a variable speed trigger for ultimate control over the power range. The M12™ REDLITHIUM™ XC 4.0Ah Battery delivers best in class run-time and performance. This pruning saw features a full house chain, easy access chain tensioner, automatic oiler, metal bucking spikes, and onboard storage for the scrench. The M12 FUEL™ HATCHET™ 6" Pruning Saw is part of the M12™ System which is fully compatible with over 100 solutions. This tool kit includes (1) M12 FUEL™ HATCHET™ Pruning Saw (2527-20), (1) M12™ REDLITHIUM™ XC 4.0 Battery Pack (48-11-2440), (1) M12™ Charger (48-59-2401), (1) Oregon 6" Bar & Chain, (1) Scabbard, and (1) Scrench. Benefits POWERSTATE™ Brushless Motor delivers the power to complete cuts in demanding materials Full House Chain minimizes vibration and delivers clean cuts Easy Access Chain Tensioner allows for quick adjustments to chain tension Automatic Oiler delivers proper chain lubrication and increased productivity Translucent Oil Reservoir allows for clear visibility to oil levels All Metal Bucking Spikes allow for increased leverage during applications Variable Speed Trigger increases user control Onboard Storage for Scrench Tool with battery weighs less than 5 lbs Part of the M12™ System, featuring over 100 solutions. Technical Information Height: 9.12" Length: 16.56" Weight: 4.1 lbs Width: 3.76" Power Source: Cordless Battery System: M12 Battery Voltage: 12V Document Operator's Manual

Description Enhance the beauty and functionality of your cabinet area with RAB Design 12'' Soft White UC120-LED under cabinet lights. These fixtures have a direct 120V AC dimmable driver eliminating the need for an external power source. UC120-LED under cabinet lights are easy to install and can be used in plug-in or hardwired installations. **Connecting accessories not included** Benefits Quick plug-in installation for kitchen cabinets, coves, closets, workbenches, and other indoor applications Extruded aluminum housing with a frosted lens in white finish 400W maximum on one run Fixture lengths available of 12”, 20”, 40”, and 60 Available in 3,000K or 4,000K. Certifications: Energy Star, UL, IP20 Available Accessories (Not Included): Wiring Enclosure Box , 90° Interconnect , Interconnect cables (Available in 6″ , 12″ , 24″ , and 36″ lengths), 5’ Power cord with Plug , 5' Power cord with plug and switch Technical Information Model: UC120-LED12NW Watts: 3.67W Lumens: 263 Efficacy (Lumens/watt) 71.6 Voltage: 120V CCT: 4000K Operating Temp: -20C to 40C Standard Lens: Polycarbonate Finish Options: White Certification: cULus, Easy Install, IP20, Energy Star Warranty: 5 Years Document Specification sheet

Description Connect Liteline OnCloud fixtures to the OnCloud Room Controller and keep full control even if the Wi-Fi goes down. Control on/off, dimming, white tuning, and toggle between four favorite modes. Features Durable polycarbonate body and included snap-on wall plate The Room Controller provides a maximum output of 600W for OnCloud and/or WiZ Connected devices Features an ON/OFF buttons, CCT and brightness control rockers and previous/next scene buttons Certified IEEE 802.11, Wi-Fi 2.4Ghz radio The Room Controller installs just like a regular in-wall switch. Replaces single pole/3-way switches. NEUTRAL WIRE REQUIRED This Room Controller is added as an accessory in the WiZ App and communicates directly to the WiZ enabled light fixture (works with iOS and Android) from anywhere. Voice control can also be achieved by integrating the app with most smart speakers. Works with Google Assistant, Siri, Alexa and IFTTT Operating temperature from -5°C to 45°C (23°F to 113°F) Suitable for indoor dry locations only Important Notes Compatible with OnCloud and/or WiZ Connected fixtures only Low end dimming adjustments are software controlled in the WiZ App Technical Information Approved Location: Dry / Indoor Input Voltage: 120Vac - 60 Hz Certification: cULus, FCC Compatible Load(s): OnCloud and/or WiZ; Connected products only Maximum Power: 600W Output Current: 5A Power Consumption: Relay OFF: 0.07W; Soft OFF: 0.79W; ON: 0.79W Wireless Frequency: 2.4GHz Wireless Standard: IEEE 802.11 Warranty: 3-Year Document Specification Sheet Installation Instruction

Description Enhance the beauty and functionality of your cabinet area with RAB Design 60'' Soft White UC120-LED under cabinet lights. These fixtures have a direct 120V AC dimmable driver eliminating the need for an external power source. UC120-LED under cabinet lights are easy to install and can be used in plug-in or hardwired installations. **Connecting accessories not included** Benefits Quick plug-in installation for kitchen cabinets, coves, closets, workbenches, and other indoor applications Extruded aluminum housing with a frosted lens in white finish 400W maximum on one run Fixture lengths available of 12”, 20”, 40”, and 60'' Available in 3,000K or 4,000K. Certifications: Energy Star, UL, IP20 Available Accessories (Not Included): Wiring Enclosure Box , 90° Interconnect , Interconnect cables (Available in 6″ , 12″ , 24″ , and 36″ lengths), 5’ Power cord with Plug , 5' Power cord with plug and switch Technical Information Model: UC120-LED60NW Watts: 21.47 Lumens: 1577 Efficacy (Lumens/watt) 73.3 Voltage: 120V CCT: 4000K Operating Temp: -20C to 40C Standard Lens: Polycarbonate Finish Options: White Certification: cULus, Easy Install, IP20, Energy Star Warranty: 5 Years Document Specification sheet

Description Leviton's Load Center are a must for your Smart home. Install the LDATA in your Leviton panel to make it smart. You can choose between Wi-Fi or Ethernet connection options for remote monitoring and tripping capabilities, remote firmware updates and more. It works with Leviton's SMART circuit breakers. You will need the My Leviton app to control your load center. *** You will need a separate circuit for the Hub. Please plan ahead!*** Benefits EASY - Install into your Leviton Load Center to make it smart SMART - Wi-Fi® or Ethernet connection options for remote monitoring and tripping capabilities, remote firmware updates and more INTUITIVE - My Leviton offers single app control of the control of the Leviton Smart Load Center and the Decora Smart™ Wi-Fi® product lines Technical information Amperage: 15a and 20a Voltage: 120v Pole: 1 Documents Starting Guide Smart Breakers User Guide Load Center Line Card Load Center Product Brochure

Description The WLE Wall light with Photocell and Clear leans is a compact outdoor light, perfect for entrances, back doors, loading docks, and other perimeter lighting applications. Benefits Compact and easy to install Durable aluminum backplate Vandal-resistant polycarbonate housing Includes: Photocell and Mounting crossbar to attach to junction box Technical Information Model: WLE-LED12 Watts: 12W Lumens: 1275 Efficacy: 105 lumens/watt Voltage: 120-277V Colour Temperature: 4000K Housing Material: Die Cast Aluminum Lens Material: Polycarbonate Clear Certifications: ETL, DLC, Wet Locations Documents Specification sheet

Description Our M18™ REDLITHIUM™ CP2.0 Battery delivers up to 2X more runtime, 20% more power and 2X more recharges than standard lithium-ion batteries. The lithium-ion battery pack features superior pack construction, electronics, and performance giving you more work per charge and more work over pack life than any battery on the market. The rechargeable battery also offers you 2.0 amp-hours of runtime. Each battery pack is durably built for heavy-duty use, runs cooler, and performs in climates below 0°F/-18°C. Its compact, lightweight design allows you to work in tight work spaces and reduces fatigue. Built-in REDLINK™ Intelligence protects the battery from overloads, preventing you from damaging your cordless power tools in heavy-duty situations, while the discharge protection prevents cell damage. An integrated temperature management system and individual cell monitoring help to maximize your battery's life. Switch to our REDLITHIUM™ CP2.0 Compact Battery Pack to instantly upgrade the runtime and durability of your Milwaukee M18™ cordless tools. Benefits REDLINK™ Intelligence: Provides optimized performance and overload protection using total system communication between tool, battery and charger Best-in-class construction: Offers long-lasting performance and durability Fuel gauge onboard: Displays remaining runtime for less downtime on the job All-weather performance: Delivers fade-free power in extreme jobsite conditions Versatility: Powers more than 40 Milwaukee M18™ cordless power tools Technical Information Voltage: 18V Battery System: M18 Warranty: 2 Year Limited Warranty Document Operator Manual

Description This versatile programmable thermostat with TRIAC switching features outstanding accuracy and a backlit display. The advantages of TRIAC switching: 100% silent operation – ideal even for bedrooms Unsurpassed temperature control eliminates temperature swings No temperature swings means you are comfortable at a lower setpoint Comfort at a lower setpoint saves money on heating bill Features Ultimate temperature control – the most accurate type of thermostat on the market (± 0.15ºC / 0.27ºF) Backlit display for easy reading Early Start function ensures programmed temperature is reached by programmed time 5+2 programming – separate programs for weekdays and weekends Temperature lock limits minimum and maximum setpoints Temporary bypass enables temperature override without changing programming Battery-free backup means no re-programming your schedule after power outage Technical Information Application: Electric Heating; Baseboard heater; Convector or Fan-forced heater Dimensions: 4.9"x 5" x 1.4" (124mm x 127mm x 36mm) Mounting: Vertical Electrical rating: Minimum Load: 0.83A (Resistive only) 200w @ 240Vac, 100w @120Vac ;Maximum Load: 14.6A (Resistive only), 3500w @ 240Vac, 1750w @ 120Vac Frequency: 60 Hz Electrical Connections: 6" (10mm) tinned copper lead wires Supply Voltage: 120/240 Vac Power Method: Hardwired Sensor Element: Thermistor Accuracy: 0.27°F (0.15°C) 0.9°F for fan-forced heaters (0.5°C for fan-forced heaters) Differential Temperature: 0.27°F (0.15°C) Color: White Ambient Temperature Range: 32°F to 122°F (0°C to 50°C) Switching Action: SPST Switch Type: Triac Programmability: 5-2 Day Program Setting Temperature Range: 41°F to 86°F (5°C to 30°C) Document Brochure Instruction Manual

Description The Milwaukee® M18™ FUEL™ QUIK-LOK™ edger attachment is powered by the M18™ FUEL™ power head with QUIK-LOK™ and is compatible with the QUIK-LOK™ attachment system. The unit has an 8 in. blade and high strength guard for increased durability. The edger includes mud flaps to prevent dirt kickback as well as a skid plate to protect the gearbox from concrete contact. The adjustable wheel allows for setting an optimized blade depth and tool angle for maximum control. The QUIK-LOK™ attachments feature protected drive shafts for increased durability against drops and storage elements. The edger attachment utilizes optimized gearing to manage the cordless M18™ FUEL™ power head RPM output specifically for edging applications. Benefits Compatible with the M18 FUEL™ Power Head w/ QUIK-LOK™ High Strength Guard: Metal Alloy Guard Delivers Greater Durability And Includes Blade Indication For Cut-Line Visibility Adjustable Wheel: Optimizes Blade Depth and Tool Angle For Maximum Control Mud Flaps: Prevents Dirt and Debris Kick-Back Skid Plate: Protects Gear Box From Concrete Contact Blade Size: 8" RPM: 3,900 Length: 38" Weight: 5.25 lbs Document Operator Manual

Description The IDEAL 6-piece Electrician's Tool Kit is great for around the house work or for someone new to the trade. Super value kit contains 6 of the most popular tools used by Professional Electricians plus a bonus #2 Robertson Screwdriver. Kit Includes Pliers with dipped-grip handles: 9-1/2” Linesman (30-430) 8” Diagonal Cutting (35-029) 8-1/2” Long-Nose (35-038) Cushion-Gripped Screwdrivers: 1/4” Heavy-Duty Cabinet (35-150) #2 Phillips (35-194) Wire Stripper: T ® -Stripper Wire Stripper (45-120) PLUS BONUS! Robertson #2 Screwdriver (35-925)

Description Save energy with Sylvania Ultra LED A21 lamp that produces light at 3000K offers years of service and reduces maintenance costs. This lamp is environmentally preferred products. It is RoHS compliant and contains no mercury, lead or other hazardous materials. Benefits Suitable for indoor and outdoor environments RoHS Compliant Mercury and lead-free Emit no UV or IR radiation. Suitable for rough service Reduces energy consumption Last up to 20 times longer than incandescent lamps No warm-up time, instant-on with full light output and stable color Dimmable Technical Information Specification Sheet Brand: Ledvance Style: A21 Colour Temperature: 3000K Brightness: 2600 Lumens Voltage:120 V Wattage: 23 W Average Life: 15,000 hours CRI: 80 Base Type: Medium

Description Cover and protect your receptacles and plugs in style with Low profile IN-AND-OUT covers that will keep your home's design looking elegant while giving you access to a reliable outdoor power source. In-and Out covers make using outdoor plugs worry-free; don't worry about bugs, debris or weather conditions damaging your receptacle, Arlington IN-and-OUT covers are bug-proof when not in use, and are weatherproof to withstand extreme weather conditions. Benefits Fits over standard size boxes and openings in new and existing construction Weatherproof, UV-rated plastic cover Removable, cover for easy installation Paintable cover Easily expand and retract cover Bug proof, no open spaces or holes Complies with NEC 2017 Section 406.9 (B) for the protection of exterior outlets which require the use of an extra-duty weatherproof while-in-use cover for all outdoor 15 or 20 AMP receptacles UL & CSA listed Includes: 1 Low profile cover, 1 Standard Duplex, and 1 standard GFCI faceplate, screws and installed gasket Technical Information Model: 60VW Height: 6.274" Width: 3.752" Material: UV-Rated Plastic Style: Vertical Trade Size: 1-Gang Documents Specification Sheet 60VW Line Drawing

Description Leviton's tamper-resistant receptacles comply with the latest NEC® requirements for use in residences and childcare facilities. Featuring a clean classic appearance, the impact-resistant thermoplastic design allows for quick installation, durability and a long service life in homes, offices, schools, guest rooms and other settings. Benefits 15A, 125 Volt Quickwire Push-In & Side Tamper-Resistant Standards and Certifications: UL/CSA Technical Information Type: Duplex Receptacle Voltage: 125 VAC Ampage: 15 A Blade Type: Straight Blade Grounding: Grounding NEMA: 5-15R Pole: 2 Termination: Quickwire Push-In & Side Wire: 3

Description Plastic In-Use Weatherproof Covers are easy to install and include adhered gasket, mounting screws, base, cover assembly and inserts to meet the needs of a variety of applications. Features Complies with 2020 NEC Article 314.15 for damp and wet locations UL Certified for Type 3R outdoor enclosures Meets requirements for cold impact testing: -60° F (-51° C) Heavy-duty UV stabilized polycarbonate cover, mounting base and inserts 1⁄8" (3 mm) thick, pre-adhered neoprene gasket with slits for mounting screws Lockable hasp: All models accept up to 1⁄4" (6 mm) dia shank, except WP3100C & WP3103C accept up to 1⁄8" (3 mm) dia shank Three inserts provided with all models that allow each model to meet multiple installations (up to 16 configurations) Max cord size: (2) #14 AWG or (1) #12 AWG Mounts vertically or horizontally Warranty: 1-year limited Technical Information Number of Included: Inserts 3 Insert Types Included: WP17 Hinge Direction: Vertical/Horizontal Is Extra-Duty Rated: No Product Dimensions (H x W x D) in: 5 3/4 x 4 x 2 3/4 in Accepted Cord Size: Max 2x14 AWG; 1x12 AWG Box Type: Single Color: Clear Weatherproof Cover Material: UV Stabilized Plastic Country of Origin (Intermatic): MEXICO Warranty Period: 1-Year limited Document Brochure Technical Sheet Instruction

Description Delivers up to 2X more runtime, 20% more power and 2X more recharges than standard lithium-ion batteries. The M18™ REDLITHIUM™ XC 4.0 Extended Capacity Battery Pack features superior pack construction, electronics and performance to deliver more work per charge and more work over pack life than any battery on the market. It offers 4.0 amp-hours of runtime. With Milwaukee durability built into each pack, this battery runs cooler and performs in climates below 0°F/-18°C. Managed by Milwaukee’s exclusive REDLINK™ Intelligence, the battery features overload protection to prevent you from damaging your cordless power tools in heavy-duty situations, while the discharge protection prevents cell damage. The temperature management system and individual cell monitoring help maximize battery life. Switch to the REDLITHIUM 4.0 XC Extended Battery Pack to instantly upgrade the runtime and durability of your Milwaukee M18 cordless tools. ***This is a pack of 2 batteries*** Benefits REDLINK™ Intelligence: Provides optimized performance and overload protection using total system communication between tool, battery and charger Best-in-class construction: Offers long-lasting performance and durability Fuel gauge onboard: Displays remaining runtime for less downtime on the job All-weather performance: Delivers fade-free power in extreme jobsite conditions Versatility: Powers more than 40 Milwaukee M18™ cordless power tools Technical Information Voltage: 18V Battery System: M18 Warranty: 3 Year Limited Warranty Document Operator Manual

Description The SlimLED Puck is an ultra-thin, easy to install, accent fixture that offers the flexibility to link multiple fixtures together and easily swap the color trim on-site. Thin enough to surface, and available for recess installation, the SlimLED Puck provides great illumination for accent or task lighting applications. Features Frosted lens providing even light distribution and low heat dispensation Magnetic face plate. Interchangeable with optional color (sold separately) Available in warm white (3000°k), providing 120 lumens per fixtures, 120° beam spread 100%-10% dimming capability. Included driver not dimmable. Use compatible 12v driver to achieve dimming functionality (Sold separately) Each fixture provided with a male and female low voltage connector jacks for easy linking, providing a maximum linking distance of 52" between fixtures Can be surface or recess mounted. Kit includes 3- Slim LED pucks 3- White Magnetic faceplates 1- 15w plug-in driver with 6' cord 1- 5-port wiring hub 1- Rotary switch Mounting Hardware Technical Information Application: Under Cabinet Approved Location: Damp Beam Angle: 120° CCT: 3000 K Certification: cULus Class II: Yes Color: WH CRI: 90 Dimming: Yes (Require extra part sold separately) Hole Cut: Ø 2¼ " (57mm) Input: 100-135V AC, 60Hz Lumens: Up to 120 (per light source) Lumens per Watt: Up to 60 Projected Life 70% @ 25,000 hrs Warranty: 3 Years Wattage: 2W (per light source) Document Specification Sheet Brochure Instruction

Description The MILWAUKEE® M18 FUEL™ String Trimmer kit w/ QUIK-LOK™ provides users with the power to clear thick brush, reaches full throttle in under 1 second, and features a balanced design which increases user control. The cordless string trimmer is made up of two components – the M18 FUEL™ Power Head w/ QUIK-LOK™ and QUIK-LOK™ String Trimmer Attachment. This M18 FUEL™ Power Head, part of the M18 FUEL™ QUIK-LOK™ Attachment System, is compatible with multiple attachments such as the Milwaukee Edger, Articulating Hedge Trimmer, and Pole Saw attachment. This gives users the ability to quickly swap out attachments on a single power head, delivering ultimate versatility and a lower cost of ownership. The POWERSTATE™ Brushless Motor delivers up to 6,200 RPM with up to a 16” cutting swath, and gives users the power to maintain speed in demanding applications without bogging down. The motor is positioned in the rear of the trimmer to provide the best combination of power, balance, and maneuverability. REDLINK PLUS™ intelligence gives users maximum performance while protecting from overload, overheating and over discharge. The advanced electronic package also delivers instantaneous throttle response, high and low speeds, and a variable speed trigger giving users ultimate control over the power range. The M18™ REDLITHIUM™ HIGH OUTPUT™ XC8.0 Battery gives users best in class performance and run-time in all applications. The Easy Load Trimmer Head provides users with an easy line loading experience and the ability to load up to 25' of trimmer line in under 30 seconds. The M18 FUEL™ String Trimmer w/ QUIK-LOK™ is part of the M18™ system which is fully compatible with over 200 tools. This kit includes: (1) M18 FUEL™ Power Head w/ QUIK-LOK™ (1) M18 FUEL™ QUIK-LOK™ String Trimmer Attachment (49-16-2717) (1) M18™ REDLITHIUM HIGH OUTPUT™ XC8.0 Battery (48-11-1880) (1) M18™ & M12™ Rapid Charger (48-59-1808) Benefits POWERSTATE™ Brushless Motor: Purposely built for the M18 FUEL™ Power Head w/ QUIK-LOK™ to generate the power and performance of high voltage platforms REDLINK PLUS™ Intelligence: Optimizes performance, provides overload protection preventing damage to tool and battery during heavy applications; compatible across the M18™ System. M18™ REDLITHIUM™ HIGH OUTPUT™ XC8.0 Battery Pack: Provides 50% more power and runs 50% cooler vs. M18™ REDLITHIUM™ XC Battery Packs Part of the M18 FUEL™ QUIK-LOK™ Attachment System Features the Milwaukee® Easy Load Trimmer Head RPM: 0-4900 / 0-6200 Cutting Swath: 14" - 16" Line Diameter: 0.080" / 0.095" Trigger: Variable Speed Technical Information Height: 11.25" Length: 70.5" Tool Warranty: 3 years. Weight: 9.85 lbs Width: 13" Power Source: Cordless Battery System: M18 Battery Voltage: 18V

Description This must-have kit for low-voltage installers features the basic tools needed for running coax and twisted-pair cable. The Free-Fall Snip (2101-0) cuts 19 AWG and 23 AWG electrical communication wire. The 1-3/4-Inch blade on the Cable Splicer Knife (44200) is made of steel for durability with a comfortable handle for frequent use. The kit comes with a slotted leather holder (5187) that fits belts up to 2-Inch (51 mm) wide. Benefits An essential kit for cable and phone techs Includes Leather Holder (5187), Free-Fall Snip (2101-0) and Cable Splicer Knife (44200) Slotted leather holder fits belts up to 2-Inch (51 mm) wide Serrated teeth on Free-Fall Snip provide non-slip cutting of 19 AWG and 23 AWG electrical communication wire Free-Fall Snip Knife blade features scraper and file on outside for high-efficiency Cable Splicer knife has a 1-3/4-Inch (44 mm) steel blade and comfortable handle Riveted and stitched leather construction ensures long life Technical Information Color: Black Included: Cable Splicer's Knife (Cat. No. 44200), Free-Fall Snip (Cat. No. 2101-0), Slotted Leather Holder (Cat. No. 5187) Weight: 9.3 oz (264 g) Documents Brochure

Description Contractor grade portable LED Worklight Convenient handheld work light Telescopic arm is ideal for picking up hard to reach magnetic items 3 different light settings Battery operated (3 x AAA) Magnetic pivoting base allows light to stand on its own in various positions Technical Information Lumens: 200 Colour: Yellow and Black Documents Specification sheet

Description Use to troubleshoot 120 VAC grounded outlets and test GFCI receptacles. Light sequence indicates correct/incorrect wiring. Lifetime Limited Warranty. Features Use to troubleshoot 120 VAC grounded outlets and test GFCI receptacles Light sequence indicates correct/incorrect wiring Lifetime Limited Warranty

Description Keep your hands warm on the job with Klein Tools' Winter Thermal Gloves. Constructed with Thinsulate™ lining that helps hands stay dry even in harsh winter conditions. The synthetic leather palm assists in maintaining dexterity and flexibility so you can continue working. Features Winter thermal gloves constructed with Thinsulate™ lining for protection and warmth in cold weather Helps hands stay dry and warm with the water resistant liner Maintain dexterity with the synthetic leather palm Stretch knit fabric for flexibility through knuckles and fingers EVA Foam padding on palm for added comfort while working Hook and loop wrist closure helps keeps cold air out while maintaining heat and keeping your hands warm Thinsulate™ is a trademark of 3M Machine washable Technical Information Type: Work Gloves Application: Wire Pulling Special Features: 20 g Thinsulate and Waterpoof Liner Overall Length: 5'' (12.5 cm) Overall Height: 10.75'' (27.5 cm) Overall Width: 1.5'' (3.8 cm) Material: 45% Synthetic Leather, 20% Knit Fabric, 7% 3M Thinsulate 40g liner, 7% Polyester, 6% EVA foam Padding, 6% Nylon Stitching, 5% Polyester Waterproof Membrane, 4% Other Color: Black, Charcoal Grey, Orange, White Size: Medium Gender: Unisex Cuff: Hook and Loop Contains Latex: No Knuckle Strap Protection: No Lined: Yes Thickness: 2.25'' (5.7 cm) Insulated: Yes Heat Resistant: No Water Resistant: Yes Spandex/Stretchable Back: Yes Reinforced Palm/Palm Pad: Yes Powdered/Powder Free: No Thumb Patch: No Anti-Slip Grip: No Safety Features: No Machine Washable: Yes Weight: 5.1 oz (145 g) Document Brochure

Description White Square trim for the SlimLED 4" fixtures. ***trim only Document Brochure Spec Sheet

Description This Hook and Loop Replacement Roll is a strong, yet flexible hook and loop tape that can be cut to custom lengths to create versatile cable ties. These ties are used to securely hold and organize wire and cable bundles of any size without causing adverse damage to conductors or jackets. Includes one 25-Foot roll of black, 3/4-Inch wide tape. For use with Klein Tools Hook and Loop Tape Dispenser (Cat. No. 450-900). Features Replacement Roll of Hook and Loop Tape (25-Foot) for making custom length cable ties For use with Klein's Hook and Loop Tape Dispenser (Cat. No. 450-900; sold separately) Strong hook and loop tape material securely holds large bundles of wire and cable, yet is flexible and supple to avoid causing adverse damage to conductors or jackets Hook and loop tape may be cut to length to make cable ties for organizing and managing cable bundles of different sizes Replacement roll easily installs in the Klein Tools Hook and Loop Tape Dispenser to create cable ties of custom length on the go Includes 25 feet of black tape Versatile and strong custom length cable ties may be used to hold, organize, and manage a limitless range of wire and cable bundles, power cords, audio leads, video wiring, or multimedia cabling Replacement roll also available in white (Cat. No. 450-960) Technical Information Type: Cable Tie Application: Cable Management Special Features: Hook and Loop Design Material: Nylon Color: Black Surface Texture: Hook and Loop Lock Style: Hook and Loop Maximum Diameter: Variable Indoor/Outdoor: Yes Overall Length: 4.4'' (11.2 cm) Overall Height: 4.4'' (11.2 cm) Overall Width: 0.75'' (1.9 cm) Weight: 8 oz (227 g) UPC: 092644583605 Document Brochure Instruction

Description The M12™ soldering iron delivers fast application speeds by reaching operational temperature in under 18 seconds and maintaining an optimized temperature throughout the most demanding applications. The heat indicator utilizes REDLINK™ Intelligence to notify users when the tool is ready to use and safe to store, eliminating the guesswork. The 3stop pivoting head provides unmatched access by allowing users the ability to adapt the tool for the application and solder in more confined spaces. The M12™ soldering iron powered by REDLITHIUM™ battery technology delivers up to 40 minutes of runtime on a M12™ compact battery pack. Features Heats Quickly, Maintains Optimized Temperature Ready-to-Use & Safe-to-Store Tip Indicator 18 Second Heat Up Time Green LED Indicates Operating Temperature Reached Red LED Indicates Tool is Off and Still Hot 3-Stop Pivoting Head: Delivers Unmatched Access Tool-Free Tip Change: Easily Switch Between Chisel and Pointed Tips LED Work Light Compatible with all M12™ Battery Packs Part of the M12™ System, Featuring 80+ Tools Kit Includes (1) M12™ Soldering Iron (Tool Only) (2488-20) (1) Pointed Tip (1) M12™ REDLITHIUM Compact Battery Pack (1) M12 Charger and Carrying Case (1) Chisel Tip Technical Information Height: 1.385" Length: 10.060" Weight: 0.480 lbs Width: 1.136" Power Source: Cordless Compatible Batteries: Compatible with All M12™ Chargers Compatible Chargers: Compatible with All M12™ Chargers Max Temperature: 750° Heat Output: 90w Heater Battery System: M12 Document Owner's Manual

Description Elevating the LUNA that you know and love to have white tunability through Wi-Fi while still keeping great features like WET location rating, 360-degree rotation and 30-degree tilt. Features Durable airtight aluminum body with adjustable regressed gimbal. includes anodized blue heat sink to provide maximum airflow for the LED light source This general application light fixture features a 12 watt LED module that maintains uniform intensity producing up to 850 lumens, with a typical CRI of 90 Tunable White 2700 k to 5000 k color temperatures 100%-10% Wi-Fi dimming capability. Dimming controlled via WiZ App and Room Controller Fixture Lens provides 38° beam spread Includes two spring loaded clips to attached to any ceiling material Extruded aluminum hardwire box with 12 watt (300 mA) Wi-Fi dimmable LED driver with 100-135V AC input. Includes an 18" wire with 3-Pin DC connector between driver and fixture Can be controlled via the WiZ App (works with iOS and Android) from anywhere. Voice control can also be achieved by integrating the app with most smart speakers. Works with Google Assistant, Siri, Alexa and IFTTT Three "Quick Connect" push-in terminals for fast and easy wiring Minimum starting temperature of -40°C (-40°F) Suitable for Wet locations Approved for direct contact with insulation Suitable for indoor/outdoor applications Technical Information Application: Ceiling Recess Mount Approved Location: Wet / Insulated Ceilings / Indoor / Outdoor Beam Angle: 38° CCT: Tunable White (2700 K - 5000 K) Certification: cETLus Class II: Yes Colour: Black CRI: 90 Dimming: Yes Dimming Tech: Wi-Fi Dimming (via WiZ App) Energy Star: Yes Hole Cut: Ø 4¼ " (108mm) Input: 100-135V AC, 60Hz Lumens: Up to 850 Lumens per Watt: Up to 71 Power Factor: 0.9 Projected Life: 70% @ 50,000 hrs Warranty: 3-Year Wattage: 12W Document Specification Sheet Installation