Heating, Cooling & Ventilation

Description nVent Nuheat Cable is an easy-to-install electric floor heating system that combines installation versatility with advanced new technology. Choose the cable kit that is best suited for the size of the room/area and configure it on-site to provide floor heat in the desired areas of the room. Benefits Heats tile, stone, and laminate/engineered wood floors On-site flexibility Flexible wire spacing and heat output Compatible with nVent Nuheat Membrane Comprehensive selection of sizes to choose from Suitable for wet environments such as showers and steam rooms Redesigned, thinner cold-lead and factory splice New mid-point marker on the heating cable Technical Information Operating Voltage: 240 V Length: 630' Amperage: 8.0 amps Surface covering: 160 sq. ft. Power Output: 12 - 15 watts per square foot Maximum Ambient Temperature: 194°F (90°C) Material: Two single conductor Tefzel-coated resistance wires covered by a tin-plated copper braid and then coated with a durable copolymer (PVC) outer jacket Documents Brochure Installation Guide

Description nVent Nuheat Cable is an easy-to-install electric floor heating system that combines installation versatility with advanced new technology. Choose the cable kit that is best suited for the size of the room/area and configure it on-site to provide floor heat in the desired areas of the room. Benefits Heats tile, stone, and laminate/engineered wood floors On-site flexibility Flexible wire spacing and heat output Compatible with nVent Nuheat Membrane Comprehensive selection of sizes to choose from Suitable for wet environments such as showers and steam rooms Redesigned, thinner cold-lead and factory splice New mid-point marker on the heating cable Technical Information Operating Voltage: 240 V Length: 529' Amperage: 6.8 amps Surface covering: 135 sq. ft. Power Output: 12 - 15 watts per square foot Maximum Ambient Temperature: 194°F (90°C) Material: Two single conductor Tefzel-coated resistance wires covered by a tin-plated copper braid and then coated with a durable copolymer (PVC) outer jacket Documents Brochure Installation Guide

Description nVent Nuheat Cable is an easy-to-install electric floor heating system that combines installation versatility with advanced new technology. Choose the cable kit that is best suited for the size of the room/area and configure it on-site to provide floor heat in the desired areas of the room. Benefits Heats tile, stone, and laminate/engineered wood floors On-site flexibility Flexible wire spacing and heat output Compatible with nVent Nuheat Membrane Comprehensive selection of sizes to choose from Suitable for wet environments such as showers and steam rooms Redesigned, thinner cold-lead and factory splice New mid-point marker on the heating cable Technical Information Operating Voltage: 120 V Length: 474' Covering Surface: 120 sq. ft. Amperage: 12.2 amps Power Output: 12 - 15 watts per square foot Maximum Ambient Temperature: 194 °F (90°C) Material: Two single conductor Tefzel-coated resistance wires covered by a tin-plated copper braid and then coated with a durable copolymer (PVC) outer jacket Documents Brochure Installation Guide

Description nVent Nuheat Cable is an easy-to-install electric floor heating system that combines installation versatility with advanced new technology. Choose the cable kit that is best suited for the size of the room/area and configure it on-site to provide floor heat in the desired areas of the room. Benefits Heats tile, stone, and laminate/engineered wood floors On-site flexibility Flexible wire spacing and heat output Compatible with nVent Nuheat Membrane Comprehensive selection of sizes to choose from Suitable for wet environments such as showers and steam rooms Redesigned, thinner cold-lead and factory splice New mid-point marker on the heating cable Technical Information Operating Voltage: 120 V Length: 47' Covering Surface: 12 sq. ft. Amperage: 1.2 amps Power Output: 12 - 15 watts per square foot Maximum Ambient Temperature: 194 °F (90°C) Material: Two single conductor Tefzel-coated resistance wires covered by a tin-plated copper braid and then coated with a durable copolymer (PVC) outer jacket Documents Brochure Installation Guide

Description ***Traditional hardwood is typically not recommended to be installed over an electric floor heating system because the repeated heating and cooling cycles may damage the wood. Standard Mats are the thinnest and easiest to install. Standard Mats are only 1/8” thick and eliminate the need to configure the heating wires during installation. Standard Mats come in various dimensions. Simply pick the size of the mat(s) that fits the desired heating area. Because the heating wire is embedded in the Standard Mat and does not need to be configured during installation, the heat coverage is guaranteed to be consistent throughout the desired heating area. Benefits Easy to install Error-Free Reduces installation time Does not raise floor height Comprehensive selection of sizes to choose from Nuheat is approved for installation under tile, stone, marble, laminate, engineered wood, and luxury vinyl flooring Technical Information Dimension: 10'x3.5' Amperage: 1.7 amps Power Output: 413 watts Material: Consist of a single-conductor tinned copper braided heating wire sandwiched in a pre-configured pattern between durable, two porous layers of fabric ​Operating Voltage: 240 V ​Maximum Continuous Exposure Temperature: 194°F (90°C) ​Heating Cable: Single wire with ground braid outer layer ​Cold Lead: 2-wire, 18 AWG plus ground braid layer; 10 ft (3m) length Documents Brochure Installation Instructions Mat Shower Installation Instructions List of material needed to install

Description ***Traditional hardwood is typically not recommended to be installed over an electric floor heating system because the repeated heating and cooling cycles may damage the wood. Standard Mats are the thinnest and easiest to install. Standard Mats are only 1/8” thick and eliminate the need to configure the heating wires during installation. Standard Mats come in various dimensions. Simply pick the size of the mat(s) that fits the desired heating area. Because the heating wire is embedded in the Standard Mat and does not need to be configured during installation, the heat coverage is guaranteed to be consistent throughout the desired heating area. Benefits Easy to install Error-Free Reduces installation time Does not raise floor height Comprehensive selection of sizes to choose from Nuheat is approved for installation under tile, stone, marble, laminate, engineered wood, and luxury vinyl flooring Technical Information Dimension: 7'x3.5' Amperage: 1.2 amps Power Output: 294 watts Material: Consist of a single-conductor tinned copper braided heating wire sandwiched in a pre-configured pattern between durable, two porous layers of fabric ​Operating Voltage: 240 V ​Maximum Continuous Exposure Temperature: 194°F (90°C) ​Heating Cable: Single wire with ground braid outer layer ​Cold Lead: 2-wire, 18 AWG plus ground braid layer; 10 ft (3m) length Documents Brochure Installation Instructions Mat Shower Installation Instructions List of material needed to install

Description ***Traditional hardwood is typically not recommended to be installed over an electric floor heating system because the repeated heating and cooling cycles may damage the wood. Standard Mats are the thinnest and easiest to install. Standard Mats are only 1/8” thick and eliminate the need to configure the heating wires during installation. Standard Mats come in various dimensions. Simply pick the size of the mat(s) that fits the desired heating area. Because the heating wire is embedded in the Standard Mat and does not need to be configured during installation, the heat coverage is guaranteed to be consistent throughout the desired heating area. Benefits Easy to install Error-Free Reduces installation time Does not raise floor height Comprehensive selection of sizes to choose from Nuheat is approved for installation under tile, stone, marble, laminate, engineered wood, and luxury vinyl flooring Technical Information Dimension: 6'x4' Amperage: 1.2 amps Power Output: 288 watts Material: Consist of a single-conductor tinned copper braided heating wire sandwiched in a pre-configured pattern between durable, two porous layers of fabric ​Operating Voltage: 240 V ​Maximum Continuous Exposure Temperature: 194°F (90°C) ​Heating Cable: Single wire with ground braid outer layer ​Cold Lead: 2-wire, 18 AWG plus ground braid layer; 10 ft (3m) length Documents Brochure Installation Instructions Mat Shower Installation Instructions List of material needed to install

Description ***Traditional hardwood is typically not recommended to be installed over an electric floor heating system because the repeated heating and cooling cycles may damage the wood. Standard Mats are the thinnest and easiest to install. Standard Mats are only 1/8” thick and eliminate the need to configure the heating wires during installation. Standard Mats come in various dimensions. Simply pick the size of the mat(s) that fits the desired heating area. Because the heating wire is embedded in the Standard Mat and does not need to be configured during installation, the heat coverage is guaranteed to be consistent throughout the desired heating area. Benefits Easy to install Error-Free Reduces installation time Does not raise floor height Comprehensive selection of sizes to choose from Nuheat is approved for installation under tile, stone, marble, laminate, engineered wood, and luxury vinyl flooring Technical Information ​Mat Dimension: 9'x4' Amperage: 3.6 amps Power Output: 432 watts Material: Consist of a single-conductor tinned copper braided heating wire sandwiched in a pre-configured pattern between durable, two porous layers of fabric ​Operating Voltage: 120 V ​Maximum Continuous Exposure Temperature: 194°F (90°C) ​Heating Cable: Single wire with ground braid outer layer ​Cold Lead: 2-wire, 18 AWG plus ground braid layer; 10 ft (3m) length Documents Brochure Installation Instructions Mat Shower Installation Instructions List of material needed to install

Description nVent Nuheat Cable is an easy-to-install electric floor heating system that combines installation versatility with advanced new technology. Choose the cable kit that is best suited for the size of the room/area and configure it on-site to provide floor heat in the desired areas of the room. Benefits Heats tile, stone, and laminate/engineered wood floors On-site flexibility Flexible wire spacing and heat output Compatible with nVent Nuheat Membrane Comprehensive selection of sizes to choose from Suitable for wet environments such as showers and steam rooms Redesigned, thinner cold-lead and factory splice New mid-point marker on the heating cable Technical Information Operating Voltage: 240 V Length: 80' Ampage: 0.9 amps Surface covering: 20 sq. ft. Power Output: 12 - 15 watts per square foot Maximum Ambient Temperature: 194°F (90°C) Material: Two single conductor Tefzel-coated resistance wires covered by a tin-plated copper braid and then coated with a durable copolymer (PVC) outer jacket Documents Brochure Installation Guide

Description ***Traditional hardwood is typically not recommended to be installed over an electric floor heating system because the repeated heating and cooling cycles may damage the wood. Standard Mats are the thinnest and easiest to install. Standard Mats are only 1/8” thick and eliminate the need to configure the heating wires during installation. Standard Mats come in various dimensions. Simply pick the size of the mat(s) that fits the desired heating area. Because the heating wire is embedded in the Standard Mat and does not need to be configured during installation, the heat coverage is guaranteed to be consistent throughout the desired heating area. Benefits Easy to install Error-Free Reduces installation time Does not raise floor height Comprehensive selection of sizes to choose from Nuheat is approved for installation under tile, stone, marble, laminate, engineered wood, and luxury vinyl flooring Technical Information Dimension: 5'x3.5' Amperage: 0.9 amps Power Output: 210 watts Material: Consist of a single-conductor tinned copper braided heating wire sandwiched in a pre-configured pattern between durable, two porous layers of fabric ​Operating Voltage: 240 V ​Maximum Continuous Exposure Temperature: 194°F (90°C) ​Heating Cable: Single wire with ground braid outer layer ​Cold Lead: 2-wire, 18 AWG plus ground braid layer; 10 ft (3m) length Documents Brochure Installation Instructions Mat Shower Installation Instructions List of material needed to install

Description ***Traditional hardwood is typically not recommended to be installed over an electric floor heating system because the repeated heating and cooling cycles may damage the wood. Standard Mats are the thinnest and easiest to install. Standard Mats are only 1/8” thick and eliminate the need to configure the heating wires during installation. Standard Mats come in various dimensions. Simply pick the size of the mat(s) that fits the desired heating area. Because the heating wire is embedded in the Standard Mat and does not need to be configured during installation, the heat coverage is guaranteed to be consistent throughout the desired heating area. Benefits Easy to install Error-Free Reduces installation time Does not raise floor height Comprehensive selection of sizes to choose from Nuheat is approved for installation under tile, stone, marble, laminate, engineered wood, and luxury vinyl flooring Technical Information Dimension: 5'x3' Amperage: 0.8 amps Power Output: 180 watts Material: Consist of a single-conductor tinned copper braided heating wire sandwiched in a pre-configured pattern between durable, two porous layers of fabric ​Operating Voltage: 240 V ​Maximum Continuous Exposure Temperature: 194°F (90°C) ​Heating Cable: Single wire with ground braid outer layer ​Cold Lead: 2-wire, 18 AWG plus ground braid layer; 10 ft (3m) length Documents Brochure Installation Instructions Mat Shower Installation Instructions List of material needed to install

Description ***Traditional hardwood is typically not recommended to be installed over an electric floor heating system because the repeated heating and cooling cycles may damage the wood. Standard Mats are the thinnest and easiest to install. Standard Mats are only 1/8” thick and eliminate the need to configure the heating wires during installation. Standard Mats come in various dimensions. Simply pick the size of the mat(s) that fits the desired heating area. Because the heating wire is embedded in the Standard Mat and does not need to be configured during installation, the heat coverage is guaranteed to be consistent throughout the desired heating area. Benefits Easy to install Error-Free Reduces installation time Does not raise floor height Comprehensive selection of sizes to choose from Nuheat is approved for installation under tile, stone, marble, laminate, engineered wood, and luxury vinyl flooring Technical Information ​Mat Dimension: 9' x 3' Amperage: 2.7 amps Power Output: 324 watts Material: Consist of a single-conductor tinned copper braided heating wire sandwiched in a pre-configured pattern between durable, two porous layers of fabric ​Operating Voltage: 120 V ​Maximum Continuous Exposure Temperature: 194°F (90°C) ​Heating Cable: Single wire with ground braid outer layer ​Cold Lead: 2-wire, 18 AWG plus ground braid layer; 10 ft (3m) length Documents Brochure Installation Instructions Mat Shower Installation Instructions List of material needed to install

Description ***Traditional hardwood is typically not recommended to be installed over an electric floor heating system because the repeated heating and cooling cycles may damage the wood. Standard Mats are the thinnest and easiest to install. Standard Mats are only 1/8” thick and eliminate the need to configure the heating wires during installation. Standard Mats come in various dimensions. Simply pick the size of the mat(s) that fits the desired heating area. Because the heating wire is embedded in the Standard Mat and does not need to be configured during installation, the heat coverage is guaranteed to be consistent throughout the desired heating area. Benefits Easy to install Error-Free Reduces installation time Does not raise floor height Comprehensive selection of sizes to choose from Nuheat is approved for installation under tile, stone, marble, laminate, engineered wood, and luxury vinyl flooring Technical Information ​Mat Dimension: 3'4" x 2'3" Amperage: 0.8 amps Power Output: 90 watts Material: Consist of a single-conductor tinned copper braided heating wire sandwiched in a pre-configured pattern between durable, two porous layers of fabric ​Operating Voltage: 120 V ​Maximum Continuous Exposure Temperature: 194°F (90°C) ​Heating Cable: Single wire with ground braid outer layer ​Cold Lead: 2-wire, 18 AWG plus ground braid layer; 10 ft (3m) length Documents Brochure Installation Instructions Mat Shower Installation Instructions List of material needed to install

Description ***Traditional hardwood is typically not recommended to be installed over an electric floor heating system because the repeated heating and cooling cycles may damage the wood. Standard Mats are the thinnest and easiest to install. Standard Mats are only 1/8” thick and eliminate the need to configure the heating wires during installation. Standard Mats come in various dimensions. Simply pick the size of the mat(s) that fits the desired heating area. Because the heating wire is embedded in the Standard Mat and does not need to be configured during installation, the heat coverage is guaranteed to be consistent throughout the desired heating area. Benefits Easy to install Error-Free Reduces installation time Does not raise floor height Comprehensive selection of sizes to choose from Nuheat is approved for installation under tile, stone, marble, laminate, engineered wood, and luxury vinyl flooring Technical Information ​Mat Dimension: 6'x3.5' Amperage: 2.1 amps Power Output: 252 watts Material: Consist of a single-conductor tinned copper braided heating wire sandwiched in a pre-configured pattern between durable, two porous layers of fabric ​Operating Voltage: 120 V ​Maximum Continuous Exposure Temperature: 194°F (90°C) ​Heating Cable: Single wire with ground braid outer layer ​Cold Lead: 2-wire, 18 AWG plus ground braid layer; 10 ft (3m) length Documents Brochure Installation Instructions Mat Shower Installation Instructions List of material needed to install

Description ***Traditional hardwood is typically not recommended to be installed over an electric floor heating system because the repeated heating and cooling cycles may damage the wood. Standard Mats are the thinnest and easiest to install. Standard Mats are only 1/8” thick and eliminate the need to configure the heating wires during installation. Standard Mats come in various dimensions. Simply pick the size of the mat(s) that fits the desired heating area. Because the heating wire is embedded in the Standard Mat and does not need to be configured during installation, the heat coverage is guaranteed to be consistent throughout the desired heating area. Benefits Easy to install Error-Free Reduces installation time Does not raise floor height Comprehensive selection of sizes to choose from Nuheat is approved for installation under tile, stone, marble, laminate, engineered wood, and luxury vinyl flooring Technical Information ​Mat Dimension: 8'x3' Amperage: 2.4 amps Power Output: 288 watts Material: Consist of a single-conductor tinned copper braided heating wire sandwiched in a pre-configured pattern between durable, two porous layers of fabric ​Operating Voltage: 120 V ​Maximum Continuous Exposure Temperature: 194°F (90°C) ​Heating Cable: Single wire with ground braid outer layer ​Cold Lead: 2-wire, 18 AWG plus ground braid layer; 10 ft (3m) length Documents Brochure Installation Instructions Mat Shower Installation Instructions List of material needed to install

Description ***Traditional hardwood is typically not recommended to be installed over an electric floor heating system because the repeated heating and cooling cycles may damage the wood. Standard Mats are the thinnest and easiest to install. Standard Mats are only 1/8” thick and eliminate the need to configure the heating wires during installation. Standard Mats come in various dimensions. Simply pick the size of the mat(s) that fits the desired heating area. Because the heating wire is embedded in the Standard Mat and does not need to be configured during installation, the heat coverage is guaranteed to be consistent throughout the desired heating area. Benefits Easy to install Error-Free Reduces installation time Does not raise floor height Comprehensive selection of sizes to choose from Nuheat is approved for installation under tile, stone, marble, laminate, engineered wood, and luxury vinyl flooring Technical Information Dimension: 9'x3' (72''x36'') Amperage: 1.2 amps Power Output: 288 watts Material: Consist of a single-conductor tinned copper braided heating wire sandwiched in a pre-configured pattern between durable, two porous layers of fabric ​Operating Voltage: 240 V ​Maximum Continuous Exposure Temperature: 194°F (90°C) ​Heating Cable: Single wire with ground braid outer layer ​Cold Lead: 2-wire, 18 AWG plus ground braid layer; 10 ft (3m) length Documents Brochure Installation Instructions Mat Shower Installation Instructions List of material needed to install