Ceiling Lighting

Description The RA2-7F is a 7 watt 2" round fixed recessed light fixture for retrofit application. It is a high-performance, easy to install downlight solution that offers good light output, energy-efficiency and streamlined design. Suitable for wet locations. Features Durable airtight aluminum body with adjustable gimbal. Includes anodized blue heat sink to provide maximum airflow for the LED light source. This general application light fixture features a 7 watt LED module that maintains uniform intensity producing up to 450 lumens; with a typical CRI of 90. Color temperature dimming from 3000 K to 2000 K. This fixture is compatible with industry standard forward-phase / reverse-phase and TRIAC/ELV dimmers The fixture lens provides 40° beam spread. Includes two spring loaded clips to attached to any ceiling material Extruded aluminum hardwire box with 170mA dimmable class II electronic LED driver with 100-135V AC input. Includes an 18"FT6 rated cable with DC 2.1 connector between driver and fixture approved for use in plenums and suspended ceilings Three "Quick connect" push-in terminals for fast and easy wiring. Operating temperature range from -20°C to 40°C (-4°F to 104°F) Suitable for wet locations and suitable for insulated ceiling applications. Approved for direct contact with insulation. Airtight Technical Information Application: Ceiling Recess Mount Approved Location: Wet / Insulated Ceilings Beam Angle: 40° CCT: 3000 K~2000 K Certification: cETLus Class II: Yes Color: White CRI: 90+ Dimming: Yes Dimming Tech: Forward/reverse-phase - TRIAC/ELV Hole Cut: Ø 2-1/2" (64mm) Input: 100-135V AC, 60Hz Lumens: 700 Lumens per Watt: 64 Power Factor: >0.90 Projected Life: 70% @ 33,000 hrs Warranty: Lifetime Wattage: 7W Document Brochure Installation instruction Compatible Dimmers Specification Sheet

Description Full color and white tunable with magnetic interchangeable baffles, SKYE OnCloud is ready to add interest to any room with regressed optics for less glare and a quiet ceiling. Available in a 4-pack with an OnCloud Room Controller, perfect for small rooms such as a bedroom or office. Control on/off, dimming, white tuning, or select through 4 favorite modes all from the wall. Features Durable airtight aluminum body with UV stable diffuser lens for low glare. Includes silicone gasket for wet location applications. Includes a white interchangeable magnetic trim. This general application light fixture features a 12 watt LED module that maintains uniform intensity producing up to 900 lumens, with a typical CRI of 90. RGB and tunable white (2700K to 5000K) 100%-10% Wi-Fi dimming capability. Dimming controlled via the WiZ App and Room Controller (Not included) The fixture lens provides 75° beam spread Includes two spring loaded clips to attached to any ceiling material Extruded aluminum hardwire box with 300mA Wi-Fi dimmable LED driver with 100-135V AC input. Includes 18" wire with 6-Pin DC connector between driver and fixture Can be controlled via the WiZ app (Works with iOS and Android) from anywhere. Voice control can also be achieved by integrating the app with most smart speakers. Works with Google assistant, Siri, Alexa and IFTTT "Quick connect" push-in terminals in hardwire box for fast and easy wiring Minimum starting temperature of -40°C (-40°F) Suitable for wet locations, indoor or outdoor and approved for direct contact with insulation. Technical Information Application: Ceiling Recess Mount Approved Location: Wet / Insulated Ceilings / Indoor / Outdoor Beam Angle: 75° CCT: RGB + Tunable White (2700 K - 5000 K) Certification: cETLus Class II: Yes Color: WH CRI: 90 Dimming: Yes Dimming Tech: Wi-Fi Dimming (via WiZ App) Hole Cut 4": 4¼ " (108mm) Input: 100-135V AC, 60Hz Lumens 4": up to 900 Lumens per Watt: Up to 95 Power Factor: >0.9 Projected Life: 70% @ 50,000 hrs Warranty: 3-Year Wattage: 12W Document Specification Sheet Installation Instruction

Description Sylvania Ultra RT4 unit is a four-inch LED recessed downlight kit that creates high performing soft white light, optimized for new construction and retrofit applications. The adjustable gimbal features a smooth travel from nadir to a 35° tilt, making it suitable for slanted ceilings and wall wash. It is dimmable to 10% with standard 120V electronic low voltage dimmers (recommended), incandescent or magnetic low voltage dimmers. Benefits Quick & easy installation Suitable for indoor & outdoor dry, damp and wet locations Adjustable gimbal featuring 35° tilt and 360° rotation Replacement for 50W R20 incandescent lamps Fits into most 4" recessed downlight fixtures Reduces energy consumption Lasts up to 25 times longer than incandescent and halogen lamps No warm-up time, instant-on with full light output and stable lamp to lamp color Integrated white trim and white baffle reflector, medium base socket adaptor included for direct replacement Technical Information Specification Sheet Brand: Ledvance Style: RT4 Colour Temperature: 3000K Brightness: 600 Lumens CRI: Up to 90 Voltage: 120 V Wattage: 9 W Average Life: 50,000 hours Beam Angle: 80°

Description When searching for lighting flexibility, look no further than Dals 4” flat gimbal LED downlights. With powerful lumen output and the ability to direct light with a 360° rotation and a 90° tilt angle, this product will meet your every need. Features Every fixture includes a junction box with integrated dimmable driver Can be daisy chained Superior LED performance and lifespan 90° tilting, 360° rotation Minimal heat emission Aluminum construction Switch-selectable CCT: 2700K/3000 K/3500 K/4000 K/5000 K Low profile 40° beam spread IC certification (suitable for direct contact with insulation) Air-tight certified as per ASTM E283-04 Suitable for wet locations Ideal operating temperature: -20° to 40° C 5-year warranty Technical Information Recommended Dimmers See spec sheet in downloads tab for recommended dimmers Watts 9W Delivered Lumen 800lm LED Lumens 850lm CRI 90+ Color Temperature 2700K, 3000K, 3500K, 4000K, 5000K, 5CCT Voltage 120V Dimming 0-10V, ELV, TRIAC Cutout size Ø4-1⁄4" Dimensions Ø4-13/16" x 1-5/16" Lifetime 50000H Document Brochure Instruction Spec Sheet

Description When searching for lighting flexibility, look no further than Dals 4” flat gimbal LED downlights. With powerful lumen output and the ability to direct light with a 360° rotation and a 90° tilt angle, this product will meet your every need. Features Every fixture includes a junction box with integrated dimmable driver Can be daisy chained Superior LED performance and lifespan 90° tilting, 360° rotation Minimal heat emission Aluminum construction Switch-selectable CCT: 2700K/3000 K/3500 K/4000 K/5000 K Low profile 40° beam spread IC certification (suitable for direct contact with insulation) Air-tight certified as per ASTM E283-04 Suitable for wet locations Ideal operating temperature: -20° to 40° C 5-year warranty Technical Information Recommended Dimmers See spec sheet in downloads tab for recommended dimmers Watts 9W Delivered Lumen 800lm LED Lumens 850lm CRI 90+ Color Temperature 2700K, 3000K, 3500K, 4000K, 5000K, 5CCT Voltage 120V Dimming 0-10V, ELV, TRIAC Cutout size Ø4-1⁄4" Dimensions Ø4-13/16" x 1-5/16" Lifetime 50000H Document Brochure Instruction Spec Sheet

Description The LUNA 4" fixture, is a 12 watt, recessed light fixture for retrofit, remodel or new construction applications with 360-degree rotation and 30-degree tilt. It is a high-performance, easy to install residential grade downlight solution that offers good light output, energy-efficiency and streamlined design. Suitable for wet locations. Features Durable airtight aluminum body with adjustable regressed gimbal. Includes anodized blue heat sink to provide maximum airflow for the LED light source General application light fixture featuring a 12 watt LED module that maintains uniform intensity producing up to 700 lumens, with a typical CRI of 90 Available in 3000k color temperatures 100%-10% dimming capability. This fixture is compatible with industry standard forward-phase / reverse-phase and TRIAC/ELV dimmers Fixture lens provides 38° beam spread Includes two spring loaded clips to attached to any ceiling material Extruded aluminum hardwire box with 300mA dimmable class II electronic LED driver with 100-135V AC input. Includes an 18" FT6 rated cable with DC 2.1 connector between driver and fixture approved for use in plenums and suspended ceilings Three "quick connect" push-in terminals for fast and easy wiring Operating Temperature from -20°C to 40°C (-4°F to 104°F) Suitable for wet locations Approved for direct contact with insulation Technical Information Application: Ceiling Recess Mount Approved Location: Wet / Insulated Ceilings Beam Angle: 38° CCT: 3000 K to 2000 K Certification: cETLus Class II: Yes Colour: Black CRI: 90 Dimming: Yes Dimming Tech: Forward/reverse-phase - TRIAC/ELV Energy Star: Yes Hole Cut: Ø 4¼ " (108mm) Input: 100-135V AC, 60Hz Lumens: Up to 700 Lumens per Watt: Up to 59 Power Factor: 0.9 Projected Life: 70% @ 50,000 hrs Warranty: Lifetime Wattage: 12W Document Brochure Specification Sheet Installation Compatible Dimmers

Description Slim LED Ceiling light with occupancy sensor that automatically detects motion & turns light On & Off. Installs in 60 seconds. Features Contemporary low profile design Easy to install in 60 seconds to existing recessed junction box Mounts flush to ceiling for indoor or outdoor applications Delivers 1000+ lumens replacing up to 100W incandescent lamp. Die cast aluminum housing with polycarbonate lens. Rated for damp locations Meets NFPA 70, NEC section 410.16, C (1) Requirements. Technical Information Model: SPLRP-LED (without Sensor) Watts: 12 Lumens: 1037 Voltage: 120V Replaces Up To: 100W Incandescent Lamp Colour Temp: 4000K Finish: White Certifications: Energy Star, cETLus, Approved for Damp Locations, Easy Install Warranty: 5 Years Document Spec sheet

Description Slim LED Ceiling light with occupancy sensor that automatically detects motion & turns light On & Off. Installs in 60 seconds. Features Contemporary low profile design Easy to install in 60 seconds to existing recessed junction box Mounts flush to ceiling for indoor or outdoor applications Delivers 1000+ lumens replacing up to 100W incandescent lamp. Die cast aluminum housing with polycarbonate lens. Rated for damp locations Meets NFPA 70, NEC section 410.16, C (1) Requirements. Technical Information Model: SPLRP-LED (with Sensor) Watts: 12 Lumens: 1037 Voltage: 120V Replaces Up To: 100W Incandescent Lamp Colour Temp: 2700K Finish: White Lighting Controls: Sensor set to leave light on for 3 minutes of inactivity Certifications: Energy Star, cETLus, Approved for Damp Locations, Easy Install Warranty: 5 Years Document Spec sheet

Description Dals' flush mounts incorporate Edge-Lit technology, eliminating hot spots or glare. Can be installed inside or outside and offer 5 switch-selectable CCT settings – 2700 K, 3000 K, 3500 K, 4000 K, and 5000 K. Features Integrated dimmable driver Over 50,000 hours of service life Switch-selectable CCT: 2700 K/ 3000 K/ 3500 K/ 4000 K/ 5000 K in canopy Superior LED performance and lifespan Smooth 360° wide spread Minimal heat emission Frosted lens Edge-lit technology Cast aluminum construction Suitable for outdoor locations on covered ceilings only JA8 certified Ideal operating temperature: -20° to 40° C 5-year warranty Technical Information Finish: White Wiring: Hardwire Dimming: TRIAC Recommended Dimmers: See spec sheet in document tab for recommended dimmers Watts: 17W Delivered Lumen: 880lm LED Lumens: 1000lm CRI: 90+ Beam Angle: 110° Color Temperature: 2700K, 3000K, 3500K, 4000K, 5000K Voltage: 120V IP Rating: IP44 Rating: Wet Location: Indoor/Outdoor Smart: No Dimensions: Ø10" x 1" Lifetime: 50000H Warranty: 5 year Limited Document Spec sheet and recommended dimmers Brochure Instruction

Description When searching for lighting flexibility, look no further than Dals' 4” flat gimbal LED downlights. With powerful lumen output and the ability to direct light with a 360° rotation and a 90° tilt angle, this product will meet your every need. Features Every fixture includes a junction box with integrated dimmable driver Can be daisy chained Superior LED performance and lifespan 90° tilting, 360° rotation Minimal heat emission Aluminum construction Low profile 40° beam spread IC certification (suitable for direct contact with insulation) Air-tight certified as per ASTM E283-04 FT6 rated cable Suitable for damp locations 5-year warranty Technical Information Recommended Dimmers: See spec sheet in downloads tab for recommended dimmers Watts: 9W Delivered Lumen: 700lm LED Lumens: 850lm CRI: 90+ Color Temperature: 3000K Voltage: 120V Dimming: TRIAC Cutout size: Ø4-1⁄4" Dimensions: Ø4-13/16" x 1-5/16" Lifetime: 50000H Document Brochure Instruction Spec sheet

Description Dals' new LED Panel lights are more accessible than ever before. The sleek and minimal construction allows for the easiest of installations. Features Every fixture includes a junction box with an integrated driver Over 35,000 hours of service life Can be daisy chained Superior LED performance and lifespan Smooth 360° wide spread Minimal heat emission Frosted lens Edge lit technology Aluminum construction Switch-selectable CCT: 2700K/ 3000 K/ 3500 K/ 4000 K/ 5000 K Very low profile IC certification (suitable for direct contact with insulation) Air-tight certified as per ASTM E283-04 Suitable for wet locations Ideal operating temperature: -20° to 40° C FT4 rated cable 5-year warranty Technical Information Finish: White Smart: No Beam Angle: 110° Recommended Dimmers: See spec sheet in Documents tab for recommended dimmers Watts: 11W Delivered Lumen: 770lm LED Lumens: 880lm Dimming: TRIAC CRI: 80+ Color Temperature: 2700K, 3000K, 3500K, 4000K, 5000K Rating: Wet Location: Indoor/Outdoor Voltage: 120V Cutout size: Ø4-1⁄4" Dimensions: Ø4-3/4" x 0.5" Lifetime: 35000H Warranty: 5 Year Limited Document Brochure Instruction Spec Sheet and Dimmer compatibility

Description The Notch series of regressed downlights is characterized by a deep-set LED position which greatly reduces glare, neatly packaged in a price-conscious solution to general lighting. Features Every fixture includes a junction box with an integrated driver Over 50,000 hours of service life Can be daisy chained Smooth 360° wide spread 100° beam angle Minimal heat emission Frosted lens Edge lit technology Switch-selectable CCT: 2700 K/3000 K/3500 K/4000 K/5000 K Easy-access CCT switch on panel wire IC certification (suitable for direct contact with insulation) Air-tight certified as per ASTM E283-04 Suitable for wet locations Ideal operating temperature: -20° to 40° 5-year warranty Technical Information Recommended Dimmers: Dals SM-DIMSW Voltage: 120V Watts: 11W Delivered Lumen: 800lm CRI: 90+ Color Temperature: 2700K, 3000K, 3500K, 4000K, 5000K, 5CCT IP Rating: IP44 Dimming: ELV, TRIAC Cutout size: Ø4-1⁄4" Dimensions: Ø4-3/4" x 1-7/8" Lifetime: 50000H Document Brochure Instruction Spec Sheet

Description The extra large trim ring is for use with Liteline round SlimLED fixtures, to enlarge the appearance of the trim. The body is constructed from stamped steel for rigidity and finished with UV stabilized paint to match compatible fixtures. Compatibility These trim rings are compatible with all 6" round SlimLED™ fixtures. Document Specification Sheet

Description The extra large trim ring is for use with Liteline round SlimLED fixtures, to enlarge the appearance of the trim. The body is constructed from stamped steel for rigidity and finished with UV stabilized paint to match compatible fixtures. Compatibility These trim rings are compatible with all 4" round SlimLED™ fixtures. Document Specification Sheet

Description Slim LED Ceiling light with occupancy sensor that automatically detects motion & turns light On & Off. Installs in 60 seconds. Features Contemporary low profile design Easy to install in 60 seconds to existing recessed junction box Mounts flush to ceiling for indoor or outdoor applications Delivers 1000+ lumens replacing up to 100W incandescent lamp. Die cast aluminum housing with polycarbonate lens. Rated for damp locations Meets NFPA 70, NEC section 410.16, C (1) Requirements. Technical Information Model: SPLRP-LED (without Sensor) Watts: 12 Lumens: 1037 Voltage: 120V Replaces Up To: 100W Incandescent Lamp Colour Temp: 2700K Finish: White Certifications: Energy Star, cETLus, Approved for Damp Locations, Easy Install Warranty: 5 Years Document Spec sheet

Description Dals' new LED Panel lights are more accessible than ever before. The sleek and minimal construction allows for the easiest of installations. Features Every fixture includes a junction box with an integrated driver Over 35,000 hours of service life Can be daisy chained Superior LED performance and lifespan Smooth 360° wide spread Minimal heat emission Frosted lens Edge lit technology Aluminum construction Switch-selectable CCT: 2700K/ 3000 K/ 3500 K/ 4000 K/ 5000 K Very low profile IC certification (suitable for direct contact with insulation) Air-tight certified as per ASTM E283-04 Suitable for wet locations Ideal operating temperature: -20° to 40° C FT4 rated cable 5-year warranty Technical Information Finish: Satin Nickel Smart: No Beam Angle: 110° Recommended Dimmers: See spec sheet in Documents tab for recommended dimmers Watts: 11W Delivered Lumen: 770lm LED Lumens: 880lm Dimming: TRIAC CRI: 80+ Color Temperature: 2700K, 3000K, 3500K, 4000K, 5000K Rating: Wet Location: Indoor/Outdoor Voltage: 120V Cutout size: Ø4-1⁄4" Dimensions: Ø4-3/4" x 0.5" Lifetime: 35000H Warranty: 5 Year Limited Document Brochure Instruction Spec Sheet and Dimmer compatibility

Description Dals' flush mounts incorporate Edge-Lit technology, eliminating hot spots or glare. Can be installed inside or outside and offer 5 switch-selectable CCT settings – 2700 K, 3000 K, 3500 K, 4000 K, and 5000 K. Features Integrated dimmable driver Over 50,000 hours of service life Switch-selectable CCT: 2700 K/ 3000 K/ 3500 K/ 4000 K/ 5000 K in canopy Superior LED performance and lifespan Smooth 360° wide spread Minimal heat emission Frosted lens Edge-lit technology Cast aluminum construction Suitable for outdoor locations on covered ceilings only JA8 certified Ideal operating temperature: -20° to 40° C 5-year warranty Technical Information Finish: Gold Wiring: Hardwire Dimming: TRIAC Recommended Dimmers: See spec sheet in document tab for recommended dimmers Watts: 17W Delivered Lumen: 880lm LED Lumens: 1000lm CRI: 90+ Beam Angle: 110° Color Temperature: 2700K, 3000K, 3500K, 4000K, 5000K Voltage: 120V IP Rating: IP44 Rating: Wet Location: Indoor/Outdoor Smart: No Dimensions: Ø10" x 1" Lifetime: 50000H Warranty: 5 year Limited Document Spec sheet and recommended dimmers Brochure Instruction

Description Dals' flush mounts incorporate Edge-Lit technology, eliminating hot spots or glare. Can be installed inside or outside and offer 5 switch-selectable CCT settings – 2700 K, 3000 K, 3500 K, 4000 K, and 5000 K. Features Integrated dimmable driver Over 50,000 hours of service life Switch-selectable CCT: 2700 K/ 3000 K/ 3500 K/ 4000 K/ 5000 K in canopy Superior LED performance and lifespan Smooth 360° wide spread Minimal heat emission Frosted lens Edge-lit technology Cast aluminum construction Suitable for outdoor locations on covered ceilings only JA8 certified Ideal operating temperature: -20° to 40° C 5-year warranty Technical Information Finish: Gold Wiring: Hardwire Dimming: TRIAC Recommended Dimmers: See spec sheet in document tab for recommended dimmers Watts: 26W Delivered Lumen: 1600lm LED Lumens: 2100lm CRI: 90+ Beam Angle: 110° Color Temperature: 2700K, 3000K, 3500K, 4000K, 5000K Voltage: 120V IP Rating: IP44 Rating: Wet Location: Indoor/Outdoor Smart: No Dimensions: Ø14" x 1" Lifetime: 50000H Warranty: 5 year Limited Document Spec sheet and recommended dimmers Brochure Instruction

Description Dals' flush mounts incorporate Edge-Lit technology, eliminating hot spots or glare. Can be installed inside or outside and offer 5 switch-selectable CCT settings – 2700 K, 3000 K, 3500 K, 4000 K, and 5000 K. Features Integrated dimmable driver Over 50,000 hours of service life Switch-selectable CCT: 2700 K/ 3000 K/ 3500 K/ 4000 K/ 5000 K in canopy Superior LED performance and lifespan Smooth 360° wide spread Minimal heat emission Frosted lens Edge-lit technology Cast aluminum construction Suitable for outdoor locations on covered ceilings only JA8 certified Ideal operating temperature: -20° to 40° C 5-year warranty Technical Information Finish: Black Wiring: Hardwire Dimming: TRIAC Recommended Dimmers: See spec sheet in document tab for recommended dimmers Watts: 26W Delivered Lumen: 1600lm LED Lumens: 2100lm CRI: 90+ Beam Angle: 110° Color Temperature: 2700K, 3000K, 3500K, 4000K, 5000K Voltage: 120V IP Rating: IP44 Rating: Wet Location: Indoor/Outdoor Smart: No Dimensions: Ø14" x 1" Lifetime: 50000H Warranty: 5 year Limited Document Spec sheet and recommended dimmers Brochure Instruction

Description Dals' flush mounts incorporate Edge-Lit technology, eliminating hot spots or glare. Can be installed inside or outside and offer 5 switch-selectable CCT settings – 2700 K, 3000 K, 3500 K, 4000 K, and 5000 K. Features Integrated dimmable driver Over 50,000 hours of service life Switch-selectable CCT: 2700 K/ 3000 K/ 3500 K/ 4000 K/ 5000 K in canopy Superior LED performance and lifespan Smooth 360° wide spread Minimal heat emission Frosted lens Edge-lit technology Cast aluminum construction Suitable for outdoor locations on covered ceilings only JA8 certified Ideal operating temperature: -20° to 40° C 5-year warranty Technical Information Finish: Black Wiring: Hardwire Dimming: TRIAC Recommended Dimmers: See spec sheet in document tab for recommended dimmers Watts: 11W Delivered Lumen: 700lm LED Lumens: 750 lm CRI: 90+ Beam Angle: 110° Color Temperature: 2700K, 3000K, 3500K, 4000K, 5000K Voltage: 120V IP Rating: IP44 Rating: Wet Location: Indoor/Outdoor Smart: No Dimensions: Ø10" x 1" Lifetime: 50000H Warranty: 5 year Limited Document Spec sheet and recommended dimmers Brochure Instruction

Description Dals' new LED Panel lights are more accessible than ever before. The sleek and minimal construction allows for the easiest of installations. Features Every fixture includes a junction box with an integrated driver Over 35,000 hours of service life Can be daisy chained Superior LED performance and lifespan Smooth 360° wide spread Minimal heat emission Frosted lens Edge lit technology Aluminum construction Very low profile IC certification (suitable for direct contact with insulation) Air-tight certified as per ASTM E283-04 Suitable for damp locations FT4 rated cable 5-year warranty Technical Information Recommended Dimmers: See spec sheet in downloads tab for recommended dimmers Watts: 11W Delivered Lumen: 770lm LED Lumens: 880lm CRI: 80+ Color Temperature: 3000K Voltage: 120V Dimming: TRIAC Cutout size: Ø4-1⁄4" Dimensions: Ø4-13/16" x 1/2" Lifetime: 35000H Document Brochure Instruction Spec Sheet

Description Dals' aluminum retrofit LED panel offers the easiest and most practical solution to your existing lighting needs. For style and convenience, the removable outer trim attaches with magnetic fasteners to create a seamless look. Can be easily retrofitted in existing 4″ canisters or standard octagonal junction boxes. Features Fits on octagonal junction boxes Fire rated alternative when mounted onto a fire rated junction box Includes A-19 socket Fits into 4″ recessed housings Minimal heat emission Aluminum construction Over 50,000 hours of service life Magnetic trim finish Suitable for wet locations Refer to website for dimmer compatibility Ideal operating temperature: -20° to 40° C 5-year warranty Technical Information Recommended Dimmers: See spec sheet in downloads tab for recommended dimmers Watts: 9W Delivered Lumen: 550lm LED Lumens: 630lm CRI: 90+ Color Temperature: 3000K Voltage: 120V Dimming: TRIAC Cutout size: Ø4" Dimensions: Ø5" x 1" Lifetime: 50000H Document Brochure Instruction Spec sheet

Description The RA4S-12RG-90 is a 12 watt 4" square regressed gimbal recessed light fixture for retrofit application. It is a high-performance, easy to install downlight solution that offers good light output, energy-efficiency and streamlined design. Suitable for wet locations. Features Durable airtight aluminum body with adjustable regressed gimbal. Includes anodized blue heat sink to provide maximum airflow for the LED light source. This general application light fixture features an LED module that maintains uniform intensity producing up to 850 lumens; with a typical CRI of 90. Dim-to-Warm fixtures available in 3000 K color temperature. 100%-10% dimming capability. This fixture is compatible with industry standard forward-phase / reverse-phase and TRIAC/ELV dimmers (contact factory for list of compatible dimmers). The fixture lens provides 38° beam spread. Includes two spring loaded clips to attached to any ceiling material. Extruded aluminum hardwire box with 12 watt (300mA) or 9 watt (210mA) dimmable class II electronic LED driver with 100-135V AC input. Includes an 18” FT6 rated cable with DC 2.1 connector between driver and fixture approved for use in plenums and suspended ceilings. Three “Quick connect” push-in terminals for fast and easy wiring. Operating Temperature -20°C~40°C (-4°F~104°F) Suitable for wet locations. Approved for direct contact with insulation. Airtight Durable airtight aluminum body with adjustable regressed gimbal. Includes anodized blue heat sink to provide maximum airflow for the LED light source. Technical Information Application: Ceiling Recess Mount Approved Location: Wet / Insulated Ceilings Beam Angle: 38° CCT: 3000 K~2000 K Certification: cETLus Class II: Yes Color: Black CRI: 90 Dimming: Yes Dimming Tech: Forward/reverse-phase TRIAC/ELV Hole Cut Ø: 4¼ " (108mm) Input: 100-135V AC, 50 / 60Hz Lumens: Up to 700 Lumens per Watt: Up to 59 Power Factor: 0.9 Projected Life: 70% @ 33,000 hrs Warranty: Lifetime Wattage: 12W Document Brochure Specification Sheet Installation Compatible Dimmers

Description Dals Lighting Recessed family has grown with a new range of adjustable downlights. The effortless design and high functionality of these fixtures are sure to make a welcome addition in any room. Features Every fixture includes a junction box with an integrated driver Over 50,000 hours service life Switch-selectable CCT: 2700 K/3000 K/3500 K/4000 K/5000 K 40° beam angle 30° tilting, 360° rotation Cast aluminum construction Suitable for wet locations Compatible with TRIAC dimmers IC certification (suitable for direct contact with insulation) Air-tight certified as per ASTM E283-04 5-year warranty Technical Information Recommended Dimmers See spec sheet in downloads tab for recommended dimmers Watts 12W Delivered Lumen 860lm CRI 90+ Color Temperature 2700K, 3000K, 3500K, 4000K, 5000K, 5CCT Voltage 120V Dimming TRIAC Cutout size Ø3-1/2″ Dimensions Ø4-1/4" x 2-5/16" Lifetime 50000H Document Brochure Instruction Spec Sheet

Description This versatile modern thin-trim 2-inch gimbal with multi-directional adjustable swivel produces a bright glow with minimal glare as a result of its regressed light source. Ideal for general lighting or for areas requiring a directional light to showcase unique elements or to create dramatic wall-wash effects. Features Every fixture includes a junction box with integrated dimmable driver Superior LED performance and lifespan Regressed light source Minimal heat emission Aluminum construction Switch-selectable CCT: 2700K/3000 K/3500 K/4000 K/5000 K IC certification (suitable for direct contact with insulation) Air-tight certified as per ASTM E283-04 40° beam angle 30° tilting, 360° rotation Suitable for wet locations Ideal operating temperature: -20° to 40° C JA8 certified FT6 rated cable 5-year warranty Technical Information Recommended Dimmers See spec sheet in downloads tab for recommended dimmers Watts 8W Delivered Lumen 660lm LED Lumens 800lm CRI 90+ Color Temperature 2700K, 3000K, 3500K, 4000K, 5000K, 5CCT Voltage 120V IP Rating IP44 Dimming TRIAC Cutout size Ø2-3/4" Dimensions Ø3-1/8" x 3" Lifetime 50000H Document Brochure Instruction Spec Sheet

Description This versatile modern thin-trim 4-inch gimbal with multi-directional adjustable swivel produces a bright glow with minimal glare as a result of its regressed light source. Ideal for general lighting or for areas requiring a directional light to showcase unique elements or to create dramatic wall-wash effects. Features Every fixture includes a junction box with integrated dimmable driver Can be daisy chained Superior LED performance and lifespan Regressed light source Minimal heat emission Aluminum construction Switch-selectable CCT: 2700K/3000 K/3500 K/4000 K/5000 K IC certification (suitable for direct contact with insulation) Air-tight certified as per ASTM E283-04 40° beam angle 30° tilting, 360° rotation Suitable for wet locations Ideal operating temperature: -20° to 40° C JA8 certified FT6 rated cable 5-year warranty Technical Information Recommended Dimmers See spec sheet in downloads tab for recommended dimmers Watts 12W Delivered Lumen 1200lm LED Lumens 1400lm CRI 90+ Color Temperature 2700K, 3000K, 3500K, 4000K, 5000K, 5CCT Voltage 120V IP Rating IP44 Dimming TRIAC Cutout size Ø4-1⁄4" Dimensions Ø4.5" x 3.5" Lifetime 50000H Document Brochure Instruction Spec Sheet

Description When choosing a recessed fixture, eliminating glare is a priority. The unique positioning of the LED module in this series of downlights will meet that important need. Features Every fixture includes a junction box with integrated dimmable driver Superior LED performance and lifespan Regressed light source Minimal heat emission Aluminum construction Switch-selectable CCT: 2700K/3000 K/3500 K/4000 K/5000 K IC certification (suitable for direct contact with insulation) Air-tight certified as per ASTM E283-04 40° beam angle Suitable for wet locations JA8 Certified Ideal operating temperature: -20° to 40° C FT6 rated cable 5-year warranty Technical Information Recommended Dimmers See spec sheet in downloads tab for recommended dimmers Dimming TRIAC Watts 8W Delivered Lumen 600lm LED Lumens 750lm CRI 90+ Color Temperature 2700K, 3000K, 3500K, 4000K, 5000K, 5CCT Voltage 120V Cutout size Ø2-3/4" Dimensions Ø3.125" x 2.75" Lifetime 50000H Document Brochure Instruction Spec Sheet

Description When choosing a recessed fixture, eliminating glare is a priority. The unique positioning of the LED module in this series of downlights will meet that important need. Features Every fixture includes a junction box with integrated dimmable driver Superior LED performance and lifespan Regressed light source Minimal heat emission Aluminum construction Switch-selectable CCT: 2700K/3000 K/3500 K/4000 K/5000 K IC certification (suitable for direct contact with insulation) Air-tight certified as per ASTM E283-04 40° beam angle Suitable for wet locations JA8 Certified Ideal operating temperature: -20° to 40° C FT6 rated cable 5-year warranty Technical Information Recommended Dimmers See spec sheet in downloads tab for recommended dimmers Dimming TRIAC Watts 8W Delivered Lumen 600lm LED Lumens 750lm CRI 90+ Color Temperature 2700K, 3000K, 3500K, 4000K, 5000K, 5CCT Voltage 120V Cutout size Ø2-3/4" Dimensions Ø3.125" x 2.75" Lifetime 50000H Document Brochure Instruction Spec Sheet

Description When choosing a recessed fixture, eliminating glare is a priority. The unique positioning of the LED module in this series of downlights will meet that important need. Features Every fixture includes a junction box with integrated dimmable driver Can be daisy chained Superior LED performance and lifespan Regressed light source Minimal heat emission Aluminum construction Switch-selectable CCT: 2700K/3000 K/3500 K/4000 K/5000 K IC certification (suitable for direct contact with insulation) Air-tight certified as per ASTM E283-04 40° beam angle Suitable for wet locations JA8 certified Ideal operating temperature: -20° to 40° C FT6 rated cable 5-year warranty Technical Information Recommended Dimmers See spec sheet in downloads tab for recommended dimmers Dimming 0-10V (with high-voltage option only), ELV, TRIAC Watts 14W Delivered Lumen 1100lm LED Lumens 1200lm CRI 90+ Color Temperature 2700K, 3000K, 3500K, 4000K, 5000K, 5CCT Voltage 120V Cutout size 4" x 4", Ø4-1⁄4" Dimensions 2.75" x 4.5" x 4.5" Lifetime 50000H Document Brochure Instruction Spec Sheet

Description When choosing a recessed fixture, eliminating glare is a priority. The unique positioning of the LED module in this series of downlights will meet that important need. Features Every fixture includes a junction box with integrated dimmable driver Can be daisy chained Superior LED performance and lifespan Regressed light source Minimal heat emission Aluminum construction Switch-selectable CCT: 2700K/3000 K/3500 K/4000 K/5000 K IC certification (suitable for direct contact with insulation) Air-tight certified as per ASTM E283-04 40° beam angle Suitable for wet locations JA8 certified Ideal operating temperature: -20° to 40° C FT6 rated cable 5-year warranty Technical Information Recommended Dimmers See spec sheet in downloads tab for recommended dimmers Dimming 0-10V (with high-voltage option only), ELV, TRIAC Watts 14W Delivered Lumen 1100lm LED Lumens 1200lm CRI 90+ Color Temperature 2700K, 3000K, 3500K, 4000K, 5000K, 5CCT Voltage 120V Cutout size 4" x 4", Ø4-1⁄4" Dimensions 2.75" x 4.5" x 4.5" Lifetime 50000H Document Brochure Instruction Spec Sheet

Description When choosing a recessed fixture, eliminating glare is a priority. The unique positioning of the LED module in this series of downlights will meet that important need. Features Every fixture includes a junction box with integrated dimmable driver Can be daisy chained Superior LED performance and lifespan Regressed light source Minimal heat emission Aluminum construction Switch-selectable CCT: 2700K/3000 K/3500 K/4000 K/5000 K IC certification (suitable for direct contact with insulation) Air-tight certified as per ASTM E283-04 40° beam angle Suitable for wet locations JA8 certified Ideal operating temperature: -20° to 40° C FT6 rated cable 5-year warranty Technical Information Recommended Dimmers See spec sheet in downloads tab for recommended dimmers Dimming 0-10V (with high-voltage option only), ELV, TRIAC Watts 14W Delivered Lumen 1100lm LED Lumens 1200lm CRI 90+ Color Temperature 2700K, 3000K, 3500K, 4000K, 5000K, 5CCT Voltage 120V Cutout size 4" x 4", Ø4-1⁄4" Dimensions 2.75" x 4.5" x 4.5" Lifetime 50000H Document Brochure Instruction Spec Sheet

Description When choosing a recessed fixture, eliminating glare is a priority. The unique positioning of the LED module in this series of downlights will meet that important need. Features Every fixture includes a junction box with integrated dimmable driver Superior LED performance and lifespan Regressed light source Minimal heat emission Aluminum construction Switch-selectable CCT: 2700K/3000 K/3500 K/4000 K/5000 K IC certification (suitable for direct contact with insulation) Air-tight certified as per ASTM E283-04 40° beam angle Suitable for wet locations JA8 Certified Ideal operating temperature: -20° to 40° C FT6 rated cable 5-year warranty Technical Information Recommended Dimmers See spec sheet in downloads tab for recommended dimmers Dimming TRIAC Watts 8W Delivered Lumen 600lm LED Lumens 750lm CRI 90+ Color Temperature 2700K, 3000K, 3500K, 4000K, 5000K, 5CCT Voltage 120V Cutout size Ø2-3/4" Dimensions Ø3.125" x 2.75" Lifetime 50000H Document Brochure Instruction Spec Sheet