April 2025 Hot Deals

Description A serious cooler that keeps cool for up to 30 hours. Not only does the Tradesman Pro Tough Box Cooler carry lunch, it also doubles as a handy place to sit. The lid on this large capacity cooler is recessed allowing space for 1-liter bottles to stand upright. A convenient compartment housed inside the lid holds smaller items such as napkins, utensils, keys, etc. Benefits Keeps cool up to 30 hours Main compartment has a 17 quart (16.1 L), 18 can capacity Supports up to 300 pounds (136.1 kg); doubles as a handy place to sit The storage compartment lid holds items like phone, medicine, keys, napkins, utensils, etc. Lid stays open at 90-degrees to allow uninterrupted access; no rust stainless steel hinged lid is recessed to accommodate 1 Liter water bottles Shoulder strap holds the lid in place while carrying and easily converts to a handle Lock hasp fits #1 Master Lock® or equivalent (not included) Technical Information Supports 300 lb Interior Lid Compartment 6-1/2'' x 4'' x 1'' (165.1 x 101.6 x 25.4 mm) Capacity: 17 qt (16.1 L) Number of Compartments: 2 Overall Length: 12'' (30.5 cm) Overall Height: 12'' (30.5 cm) Overall Width: 16.203'' (41.2 cm) Color: Gray with Orange Closure Type: Latch Handle: Yes Holds: 18 Cans Stackable: Yes Cold Temperature Range: Up to 41°F ( 5°C) for 30 Hours Insulation: Polyurethane Foam Documents Tradesman Pro™ Tough Box 17-Quart Cooler Brochure

Description Klein Tools premium KARBN™ full brim hard hats were engineered for optimal safety, cool comfort, and fit with a cutting edge design. Unique features allow the user to comfortably work in a wide variety of applications and demanding environments. Patent-pending accessory mounts on front and back ensure Klein headlamps attach securely — no straps needed! Benefits Hard Has has stylish, modern, durable hydro-dipped polymer film KARBN pattern on rugged PC/ABS composite Tested up to 20kV, this Class E Type 1 hard hat meets ANSI Z89.1-2014, CSA Z94.1-15, EN397:2012+A1:2012-5.2.4 , EN12493:2012-4.2.1.2, 4.2.1.3, 4.2.1.4 Patent-pending accessory slots on front and back ensure optional Klein headlamps attach securely and precisely, every time — no straps or zip ties needed Machine washable breathable, padded sweat-wicking sweatband and top pad improve comfort with advanced evaporative technology — simply wet and shake, for hours of cooling This model includes Klein Rechargeable Headlamp (Cat No. 56048) with charging cable Easy, one-handed adjustment with large knob ratchet mechanism even with gloves on, and soft neck pad that pivots to clear bandana knots and ponytails Universal accessory slots on both sides for attaching hearing protection, face shield and more Unique suspension system features a flexible open frame design to provide optional fit and improved air circulation Optional accessories and replacement parts (sold separately): Rechargeable Headlamps (Cat. Nos. 56048 , 56049 , 56062 ); Sweatband (Cat. No. KHHSWTBND2 ), Top Pad (Cat. No. KHHTOPPAD2 ), Suspension (Cat. No. KHHSPN2 ) and Chin Strap (Cat. No. KHHSTRP ) Technical Information Hat Style: Full Brim Type: 1 Application: Class E Special Features: Tested up to 20kV Standard: ANSI Z89.1-2014, CSA Z94.1-15, EN397:2012+A1:2012-Lateral Deformation (LD); EN12492:2012-4.2.1.2, 4.2.1.3, 4.2.1.4 Venting: No Suspension: 4-Point Suspension Adjustment: Ratchet with Pivot Shell Lining: Polyester Accessory Slots: Front, Back and Both Sides Shell Material: PC/ABS Shell Color: KARBN(tm) Pattern Hat Size: 6.5 to 8 (52 to 64 cm diameter) Bulb Type: LED Lumens: All-On/Boost: 400; Spot/High: 200; Flood/Low: 100 Batteries: Lithium-Ion Included: Hard Hat, Rechargeable Headlamp, Charging Cable, User Guide Overall Lenght: 12.5'' (31.8 cm) Overall Height: 6.5'' (16.5 cm) Overall Width: 10.7'' (27.2 cm) Weight: 1.3 lb (0.6 kg) Documents Brochure Instructions

Description The Klein Tools ET450 Advanced Circuit Tracer Kit is a professional tracer for energized and non-energized breakers, fuses, and wires. When the Transmitter is connected to a circuit, the Receiver’s sensitivity can easily be adjusted to detect the transmitted signal on breakers, fuses, and wire through drywall, cement block, and underground. Kit comes with transmitter, receiver, blade and ground prongs, alligator clips, 3-Foot and 20-Foot lead adapters, AC plug leads, instructions, all required batteries, and a hard carrying case with handle for convenient transportation and storage. Benefits The Advanced Circuit Tracer Kit provides reliable tracing of energized or non-energized breakers, fuses, and wires Easily adjust receiver sensitivity level to detect the transmitted signal through drywall, cement block, and underground Versatile applications include tracing wires, conduit or pipes, or a single wire in a bundle Audible beep and visual indicators on receiver denotes signal strength Receiver features a flashlight for illumination in low-light areas and NCV function to test if wires are energized Transmitter has AC/DC external voltage indicators of 12V, 48V, 120V, 240V, and 480V Kit comes with transmitter, receiver, blade and ground prongs, alligator clips, 3-Foot and 20-Foot lead adapters, AC plug leads, instructions, all required batteries, and a hard carrying case Technical Information Type: Circuit Tracer Application: Trace Energized and Non-Energized Breakers, Fuses, and Wires Special Features: Flashlight and NCV Function on Receiver; Accessories, and Hard Case Material: ABS and Electronic Components Batteries: Transmitter: 6 × 1.5V AA Alkaline; Receiver: 4 × 1.5V AA Alkaline Battery Life: Up to 24 hr Drop Protection: 6' (2 m) Display: Receiver: LCD with Backlight Control Type: Transmitter and Receiver Voltage: External Indicators for 12V, 48V, 120V, 240V, and 480V Frequency: Transmitter: AC 45Hz to 65Hz; Receiver: 33kHz Ingress Protection: IP42 Pollution Degree: 2 Tests Continuity: No Integral Lead Storage: No Interchangeable Leads: Yes Lead Length: 3' (1 m) and 20' (6.1 m) Standard: CAT III 600V Case Included: Yes Included: Transmitter, Receiver, Blade and Ground Prongs, Alligator Clips, 3' and 20' Lead Adapters, AC Plug Leads, Instructions, All Required Batteries, and Hard Carrying Case Overall Length: Receiver: 7.05'' (17.9 cm); Transmitter: 8.72'' (22.2 cm) Overall Height: Receiver: 1.84'' (4.5 cm); Transmitter: 1.51'' (3.9 cm) Overall Width: Receiver: 3.90'' (9.9 cm); Transmitter: 2.07'' (5.3 cm) Weight: Transmitter: 16.5 oz (470 g); Receiver: 11 oz (312 g) Document Brochure Instructions

Description The LUNA 4" fixture, is a 12 watt, recessed light fixture for retrofit, remodel or new construction applications with 360-degree rotation and 30-degree tilt. It is a high-performance, easy to install residential grade downlight solution that offers good light output, energy-efficiency and streamlined design. Suitable for wet locations. Available here in a 4-pack with an OnCloud dimmer for Wi-Fi control through the WiZ app to create scenes, set schedules and connect with smart speakers. ***The On Cloud Dimmer only works for single pole applications.*** Features Durable airtight aluminum body with adjustable regressed gimbal. Includes anodized blue heat sink to provide maximum airflow for the LED light source General application light fixture featuring a 12 watt LED module that maintains uniform intensity producing up to 700 lumens, with a typical CRI of 90 Available in 3000k color temperatures 100%-10% dimming capability. This fixture is compatible with industry standard forward-phase / reverse-phase and TRIAC/ELV dimmers Fixture lens provides 38° beam spread Includes two spring loaded clips to attached to any ceiling material Extruded aluminum hardwire box with 300mA dimmable class II electronic LED driver with 100-135V AC input. Includes an 18" FT6 rated cable with DC 2.1 connector between driver and fixture approved for use in plenums and suspended ceilings Three "quick connect" push-in terminals for fast and easy wiring Operating Temperature from -20°C to 40°C (-4°F to 104°F) Suitable for wet locations Approved for direct contact with insulation Technical Information Application: Ceiling Recess Mount Approved Location: Wet / Insulated Ceilings Beam Angle: 38° CCT: 3000 K to 2000 K Certification: cETLus Class II: Yes Colour: White CRI: 90 Dimming: Yes Dimming Tech: Forward/reverse-phase - TRIAC/ELV Energy Star: Yes Hole Cut: Ø 4¼ " (108mm) Input: 100-135V AC, 60Hz Lumens: Up to 700 Lumens per Watt: Up to 59 Power Factor: 0.9 Projected Life: 70% @ 50,000 hrs Warranty: Lifetime Wattage: 12W Document Brochure Specification Sheet

Introducing Vivio, the ideal patio heater designed to extend your patio season from spring to fall. Vivio's infrared technology directs its heat rays precisely where you need them, quickly warming people and objects with unrivalled efficiency. Designed for terraces, outdoor waiting areas, spas and large, hard-to-heat indoor spaces, Vivio is versatile and practical. Thanks to its aluminum construction and stainless steel grid, it's sturdy and lightweight, which ensures outstanding durability and easy installation. Vivio – the ultimate solution for a warm, welcoming exterior all year round!