Sustainable Selection

Description Slim LED Ceiling light with occupancy sensor that automatically detects motion & turns light On & Off. Installs in 60 seconds. Features Contemporary low profile design Easy to install in 60 seconds to existing recessed junction box Mounts flush to ceiling for indoor or outdoor applications Delivers 1000+ lumens replacing up to 100W incandescent lamp. Die cast aluminum housing with polycarbonate lens. Rated for damp locations Meets NFPA 70, NEC section 410.16, C (1) Requirements. Technical Information Model: SPLRP-LED (with Sensor) Watts: 12 Lumens: 1037 Voltage: 120V Replaces Up To: 100W Incandescent Lamp Colour Temp: 2700K Finish: White Lighting Controls: Sensor set to leave light on for 3 minutes of inactivity Certifications: Energy Star, cETLus, Approved for Damp Locations, Easy Install Warranty: 5 Years Document Spec sheet

Description Sylvania Ultra LED A19 omnidirectional lamp offers years of service and reduces energy and maintenance costs. This lamp is environmentally preferred products. This is RoHS compliant and contains no mercury, lead or other hazardous materials. Benefits Emit no UV or IR radiation Contain no mercury, lead or other hazardous materials RoHS compliant Suitable for rough service Suitable for indoor/outdoor environments Reduces energy consumption No warm-up time, instant-on with full light output and stable color Available in 5000K Technical Information Brand: Ledvance Style: A19 Colour Temperature: 2700K Brightness: 800 Lumens CRI: 80 Voltage: 120 V Wattage: 9 W Average Life: 15,000 hours

Description Hard-Wired, Dimmable power supply for UCA-LED Fixtures, 60w 24v Features Compact Design. Takes up limited space and is barely visible. Slim profile: 1.3" Compatible with most TRIAC Dimmer Switches Recommended to use with Leviton SureSlide Dimmer Safety Feature: Auto-reset protection for short circuit, over-voltage and over-heating. Wiring compartment allows easy access to wires facilitating quick wire connections. Technical Information Wattages: 60W Weight: 1.1 lbs Finish: White

Description Slim LED Ceiling light with occupancy sensor that automatically detects motion & turns light On & Off. Installs in 60 seconds. Features Contemporary low profile design Easy to install in 60 seconds to existing recessed junction box Mounts flush to ceiling for indoor or outdoor applications Delivers 1000+ lumens replacing up to 100W incandescent lamp. Die cast aluminum housing with polycarbonate lens. Rated for damp locations Meets NFPA 70, NEC section 410.16, C (1) Requirements. Technical Information Model: SPLRP-LED (without Sensor) Watts: 12 Lumens: 1037 Voltage: 120V Replaces Up To: 100W Incandescent Lamp Colour Temp: 2700K Finish: White Certifications: Energy Star, cETLus, Approved for Damp Locations, Easy Install Warranty: 5 Years Document Spec sheet

Description The Diva LED+ dimmer switch provides optimal dimming performance of LED bulbs. This dimmer switch works with up to 150-Watt of dimmable LED/CFL or 600-Watt of incandescent/halogen, allowing you to control multiple bulb types on the same circuit. It is designed to control a broad range of dimmable LED and CFL bulbs from a variety of brands including Philips, Cree, GE, EcoSmart and Lighting Science. The Diva dimmer switch features a paddle switch to turn your lights off or on returning the lights to your favorite level. This dimmer switch also features a discreet slide control next to the switch, allowing you to adjust the lights for any activity. Coordinating Claro wall plate sold separately. Features Tested on 1,000s of bulbs and dozens of brands for flicker-free dimming. Provides over 250 lighting levels so you can create the perfect light for any activity Works with up to 150-Watt of dimmable LED/CFL bulbs or 600-Watt of incandescent/halogen bulbs Lutron patented technology to optimize the dim range of your bulb and prevent interference with other dimmers in the home Can be used in single-pole or 3-Way applications with a mechanical switch. Rocker switch turns lights on/off to favorite light level. Discreet slider dims and brightens the lights Installs in as little as 15 minutes in homes of all ages – NO NEUTRAL REQUIRED Document Installation Manual Specification sheet

Description Sylvania Contractor Series LED PAR20 lamp is rated up to 11,000 hours that means years of service. It has reduced energy and maintenance costs. With its good color definition, it can be used for many applications like general lighting, recessed downlights, track lighting, and wall washer. It doesn't cause fading and discoloration of fabric or artwork. Benefits UV and IR free Mercury and lead-free RoHS compliant Reduces energy consumption Lasts 4 times longer than halogen lamps No warm-up time, instant-on with full light output and stable color No fading and discoloration of fabric or artwork Suitable for use in UL rated fixtures where protected from the weather Technical Information Specification Sheet Brand: Ledvance Style: PAR20 Beam Angle: 45° Colour Temperature: 3000K Brightness: 425 Lumens CRI: 82 Voltage: 120 V Wattage: 6 W Average Life: 11,000

Description The RA4S-12RG-90 is a 12 watt 4" square regressed gimbal recessed light fixture for retrofit application. It is a high-performance, easy to install downlight solution that offers good light output, energy-efficiency and streamlined design. Suitable for wet locations. Features Durable airtight aluminum body with adjustable regressed gimbal. Includes anodized blue heat sink to provide maximum airflow for the LED light source. This general application light fixture features an LED module that maintains uniform intensity producing up to 850 lumens; with a typical CRI of 90. Dim-to-Warm fixtures available in 3000 K color temperature. 100%-10% dimming capability. This fixture is compatible with industry standard forward-phase / reverse-phase and TRIAC/ELV dimmers (contact factory for list of compatible dimmers). The fixture lens provides 38° beam spread. Includes two spring loaded clips to attached to any ceiling material. Extruded aluminum hardwire box with 12 watt (300mA) or 9 watt (210mA) dimmable class II electronic LED driver with 100-135V AC input. Includes an 18” FT6 rated cable with DC 2.1 connector between driver and fixture approved for use in plenums and suspended ceilings. Three “Quick connect” push-in terminals for fast and easy wiring. Operating Temperature -20°C~40°C (-4°F~104°F) Suitable for wet locations. Approved for direct contact with insulation. Airtight Durable airtight aluminum body with adjustable regressed gimbal. Includes anodized blue heat sink to provide maximum airflow for the LED light source. Technical Information Application: Ceiling Recess Mount Approved Location: Wet / Insulated Ceilings Beam Angle: 38° CCT: 3000 K~2000 K Certification: cETLus Class II: Yes Color: Black CRI: 90 Dimming: Yes Dimming Tech: Forward/reverse-phase TRIAC/ELV Hole Cut Ø: 4¼ " (108mm) Input: 100-135V AC, 50 / 60Hz Lumens: Up to 700 Lumens per Watt: Up to 59 Power Factor: 0.9 Projected Life: 70% @ 33,000 hrs Warranty: Lifetime Wattage: 12W Document Brochure Specification Sheet Installation Compatible Dimmers

Description The RA2-7F is a 7 watt 2" round fixed recessed light fixture for retrofit application. It is a high-performance, easy to install downlight solution that offers good light output, energy-efficiency and streamlined design. Suitable for wet locations. Features Body Durable airtight aluminum body with anodized blue heat sink to provide maximum airflow for the LED light source. LED Characteristics This general application light fixture features a 7 watt LED module that maintains uniform intensity producing up to 560 lumens; with a typical CRI of 90. On-fixture color selectable switch allows switching between 2700K, 3000K, 3500K, 4000K and 5000K colour temperatures. Dimming 100%-10% dimming capability. This fixture is compatible with industry standard forward-phase / reverse-phase dimmers (contact factory for list of compatible dimmers). Beam Spread The fixture lens provides 40° beam spread. Mounting Includes two spring loaded clips to attached to any ceiling material. LED Driver Extruded aluminum hardwire box with 170mA dimmable class II electronic LED driver with 100-135V AC input. Includes an 18" FT6 rated cable with DC 2.1 connector between driver and fixture approved for use in plenums and suspended ceilings. Quick Connect Push-In Terminals Three "Quick connect" push-in terminals for fast and easy wiring. Operating Temperature -20°C~40°C (-4°F~104°F) Environment Suitable for wet locations. Approved for direct contact with insulation. Airtight Technical Information Application: Ceiling Recess Mount Approved Location: Wet / Insulated Ceilings Beam Angle: 40° CCT (color selectable): 2700 K / 3000 K / 3500 K / 4000 K / 5000 K Certification: cETLus Class II: Yes Color: WH CRI: 90 Dimming: Yes Dimming Tech: Forward/reverse-phase Energy Star: Yes* Hole Cut Ø: 2½ " (64mm) Input: 100-135V AC, 50 / 60Hz Lumens: Up to 640 Lumens per Watt: Up to 93 Power Factor: 0.9 Projected Life: 70% @ 50,000 hrs Warranty: Lifetime Wattage: 7W Document Specification Sheet Brochure Compatible Dimmers Instruction

Description RAB's UC Ultra slim fixture model can be combined together with their UCP and UCT LED Series. It's slim design makes it ideal to use in shelvings, under cabinets, bookcases, walls and as a task light. Available in 3 colors and 3 lengths, it's the perfect light for your project. *Each unit includes: 1 fixture, 1 direct connector, 1 cable connector, 2 mounting plates and 2 screws. **Power supply must be purchased separately Features Ultra-slim design. Extruded aluminum housing with a brushed finish. Available in three lengths: 300mm (3 watts), 500mm (5 watts), 1000mm (11 watts). Link up to 3m (9.8 ft) on one power source. 90-degree corner connector available. Natural white(4000k) or warm white (3000k) are available. Hardwire kit or plug-in power supply units are sold separately. Most TRIAC dimmers will work however under low load conditions, there may be flickering with some dimmers. Lutron Diva DVCL 153P is the recommended dimmer that works best without flickering under all load conditions. cULus approved. Technical Information Model: UC-LED500 Length: 300 mm LED Color: Natural White 3000K° Watts: 3 Lumens: 219 Efficacy (Lumens/Watt): 44 Voltage: 24DC Dimming: Compatible with most residential dimmers, Lutron DVCL 153P is recommended for best results Accessories: Corner Connector, Switch Connector, Dimmer Controller, Connector Cable, DC4 Output Splitter, DC8 Output Splitter (No included. Accessories must be purchased separately) Certification: cULus, Easy Install Warranty: 5 Years Documents Spec Sheet Instruction

Description RAB's UC Ultra slim fixture model can be combined together with their UCP and UCT LED Series. It's slim design makes it ideal to use in shelvings, under cabinets, bookcases, walls and as a task light. Available in 3 colors and 3 lengths, it's the perfect light for your project. *Each unit includes: 1 fixture, 1 direct connector, 1 cable connector, 2 mounting plates and 2 screws. **Power supply must be purchased separately Features Ultra-slim design. Extruded aluminum housing with a brushed finish. Available in three lengths: 300mm (3 watts), 500mm (5 watts), 1000mm (11 watts). Link up to 3m (9.8 ft) on one power source. 90-degree corner connector available. Natural white(4000k) or warm white (3000k) are available. Hardwire kit or plug-in power supply units are sold separately. Most TRIAC dimmers will work however under low load conditions, there may be flickering with some dimmers. Lutron Diva DVCL 153P is the recommended dimmer that works best without flickering under all load conditions. cULus approved. Technical Information Model: UC-LED1000 Length: 1000 mm LED Color: Warm White 3000K° Watts: 11 Lumens: 732 Efficacy (Lumens/Watt): 244 Voltage: 24DC Dimming: Compatible with most residential dimmers, Lutron DVCL 153P is recommended for best results Accessories: Corner Connector, Switch Connector, Dimmer Controller, Connector Cable, DC4 Output Splitter, DC8 Output Splitter (No included. Accessories must be purchased separately) Certification: cULus, Easy Install Warranty: 5 Years Documents Spec Sheet Instruction

Description The Lutron Skylark LED+ dimmer switch includes the most advanced technology for superior dimming for up to 150W of dimmable LED or 600W of Incandescent/Halogen. The Skylark dimmer switch features a smooth, linear slider knob to dim or brighten the lights while the rocker switch turns lights ON/OFF. Set a favorite preset level with the slider before turning on. The Skylark also features an easy low-end trim adjustment directly on the dimmer which eliminates complicated programming or having to turn the power off. Available in 7 gloss colors. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately). Features Rated for up to 150W LED or 600W Incandescent/Halogen No Neutral Required; 120V Single Pole or 3-Way compatible; Wire lead installation Minimum load requires 1 compatible LED or 10W Incandescent/Halogen Easy low-end trim adjustment lever; No complicated programming or turning off power to set Rocker switch turns lights on/off to favorite preset light level Linear slider knob dims and brightens the lights Technical Information Voltage: 120V Maximum Load: 150W Dimmable LED/CFL - 600W Incandescent/Halogen Operating temperatures: 0°C to 40°C (32°F to 104°F) Warranty: 1 Year Document Spec Sheet Installation Manual

Description The Lutron Maestro LED+ Motion Sensor Dimmer Switch works just like a Lutron Maestro dimmer, with the addition of Lutron’s advanced motion sensing technology to automatically and gradually turn the lights on and off. The LED+ Motion Sensor Dimmer Switch is rated for 150W dimmable LED or 600W Incandescent/Halogen bulbs. Install in a single pole, 3-way with existing switch, or with Maestro companion dimmers (MA-R/MSC-AD) to dim from up to 9 locations. Use the raise/lower buttons to adjust the brightness for any activity or determine the preset level to ensure lights always turn on to your desired light level. The passive infrared (PIR) sensor, covered by a tamper resistant lens, detects heat from occupants moving and has a 180-degree field of view (900 sq ft major motion & 400 sq ft minor motion coverage). Equipped with smart ambient light detection (ALD), you can customize your sensing dimmer to detect daylight, so lights don't turn on when enough natural light is present in the room. Unlike other manufacturers, Lutron sensors use Cross Correlation Technology (XCT) to also detect fine motion, such as typing at a desk or reading a book – ensuring lights won’t turn off inadvertently when you’re still in the room. Easy button programming is available to customize both the dimmer and the sensor’s functions, such as timeout, occupied level and sensor mode. Lutron sensors have an adjustable timeout (1, 5, 15 or 30 minutes) to control how long the lights stay on after leaving the room. The occupied level is the brightness the sensor will turn on when motion is detected. Change the sensor to vacancy mode to meet Title 24 requirements: lights only turn on with a manual press of the tap switch but automatically turn off if the sensor no longer detects motion. Available in 10+ colors. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately). Features Includes (1) Maestro LED+ Motion Sensor Dimmer Switch; Gloss Finish, Clamshell Packaging Rated for 150W dimmable LED or 600W Incandescent/Halogen bulbs; No Neutral or Ground required Screw Terminal or Push-in Installation; 120V Single Pole/Multi-location dimming with Lutron Maestro Companion dimmers (MA-R); compatible with an existing 3-way switch Features passive infrared (PIR) motion detection with exclusive Lutron XCT Technology for fine motion detection, which is 2-3x better at picking up motion than other manufacturers 180-degree sensor field of view (900 sq ft major motion & 400 sq ft minor motion coverage); Tamper-resistant lens Easy button programming mode available to customize dimmer and sensor functions such as timeout, occupied light level, and sensor mode Complies with Title 20/24 Section 110.9 for “automatic shutoff” Smart Ambient Light Detection (ALD) can be programmed so lights stay off if enough light is present in the room Document Spec sheet Instruction

Description The Diva 250-Watt LED+ dimmer switch works with dimmable LED and CFL screw-in bulbs up to 250-Watt and is also compatible with up to 600-Watt of standard incandescent and halogen bulbs, allowing you to control all 4 bulb types on the same circuit. It is designed to control a broad range of dimmable LED and CFL bulbs from a variety of brands including Philips, Cree, GE, EcoSmart and Lighting Science. With the same features as Lutron's Diva dimmer switch, the large paddle switch turns the light on/off and returns to your favorite setting. The discreet slider adjusts the light level to suit any activity. Coordinating Claro wall plate sold separately. Controls 250 W dimmable LED/CFL (screw-base), 600 W incandescent/halogen or 350 W Hi-Lume 1 percent 2-wire LED driver loads. Paddle turns on/off. Slide up to brighten, down to dim. Provides reliable dimming of dimmable LEDs/CFLs, as well as halogens and incandescents. Features Tested on 1,000s of bulbs and dozens of brands for flicker-free dimming. Provides over 250 lighting levels so you can create the perfect light for any activity Works with up to 250 Watts of dimmable LED/CFL bulbs or 600 Watts of Incandescent/Halogen bulbs Lutron patented technology to optimize the dim range of your bulb and prevent interference with other dimmers in the home Can be used in single-pole or 3-Way applications with a mechanical switch. Rocker switch turns lights on/off to favorite light level. Discreet slider dims and brightens the lights Installs in as little as 15 minutes in homes of all ages – NO NEUTRAL REQUIRED Includes (1) Diva LED+ (formerly C.L) Dimmer Switch; coordinating wallplate sold separately Document Installation Manual Spec Sheet

Description The Diva LED+ dimmer switch provides optimal dimming performance of LED bulbs. This dimmer switch works with up to 150-Watt of dimmable LED/CFL or 600-Watt of incandescent/halogen, allowing you to control multiple bulb types on the same circuit. It is designed to control a broad range of dimmable LED and CFL bulbs from a variety of brands including Philips, Cree, GE, EcoSmart and Lighting Science. The Diva dimmer switch features a paddle switch to turn your lights off or on returning the lights to your favorite level. This dimmer switch also features a discreet slide control next to the switch, allowing you to adjust the lights for any activity. Coordinating Claro wall plate sold separately. Features Tested on 1,000s of bulbs and dozens of brands for flicker-free dimming. Provides over 250 lighting levels so you can create the perfect light for any activity Works with up to 150-Watt of dimmable LED/CFL bulbs or 600-Watt of incandescent/halogen bulbs Lutron patented technology to optimize the dim range of your bulb and prevent interference with other dimmers in the home Can be used in single-pole or 3-Way applications with a mechanical switch. Rocker switch turns lights on/off to favorite light level. Discreet slider dims and brightens the lights Installs in as little as 15 minutes in homes of all ages – NO NEUTRAL REQUIRED Document Installation Manual Specification sheet