Exclude pickup

Description Easily punch holes for1-1/4-Inch EMT conduit. Has a maximum capacity of 10 gauge mild steel. Cuts aluminum, fiberglass and plastic. Features Maximum capacity of 10 gauge mild steel Also cuts aluminum, fiberglass and plastic Punch holes cleanly and accurately Black oxide finish

Description Easily punch holes for 3/4-Inch EMT conduit. Has a maximum capacity of 10 gauge mild steel. Cuts aluminum, fiberglass and plastic. Features Maximum capacity of 10 gauge mild steel Also cuts aluminum, fiberglass and plastic Punches holes cleanly and accurately Black oxide finish

Description The 7/8-Inch Knockout Die easily punches holes for 1/2-Inch EMT conduit. The optimized design reduces wrench effort. Slugs are split inside for easy removal. Cuts aluminum, fiberglass and plastic as well. Features It has a maximum capacity of 10 gauge mild steel Also cuts aluminum, fiberglass and plastic Punches holes cleanly and accurately Black oxide finish Technical Information Overall Length: 1.109'' (2.8 cm) Overall Height: 0.75'' (1.9 cm) Overall Width: 1.109'' (2.8 cm)

Description The 2.416-Inch Knockout Punch easily punches holes for 2-Inch conduit. It offers an optimized design that reduces wrench effort. Slugs are split inside for easy removal. Cuts aluminum, fiberglass and plastic as well. Features Maximum capacity of 10 gauge mild steel Also cuts aluminum, fiberglass and plastic Punches holes cleanly and accurately Black oxide finish Technical Information Overall Length: 2.406'' (6.1 cm) Overall Height: 1.343'' (3.4 cm) Overall Width: 2.406'' (6.1 cm)

Description Easily punch holes for1-1/2-Inch EMT conduit. Has a maximum capacity of 10 gauge mild steel. Cuts aluminum, fiberglass and plastic as well. Optimized design reduces wrench effort. Slugs are split inside for easy removal. Features Maximum capacity of 10 gauge mild steel Also cuts aluminum, fiberglass and plastic Punches holes cleanly and accurately Black oxide finish

Description Easily punch holes for 1-1/4-Inch EMT conduit. Has a maximum capacity of 10 gauge mild steel. The optimized design reduces wrench effort. Slugs are split inside for easy removal. Features Maximum capacity of 10 gauge mild steel Also cuts aluminum, fiberglass and plastic Punches holes cleanly and accurately Black oxide finish Conduit size stamped on the punch Optimized design reduces wrench effort Slugs are split inside for easy removal

Description Easily punch holes for 1-Inch EMT conduit. Has a maximum capacity of 10 gauge mild steel. Cuts aluminum, fiberglass and plastic. The optimized design reduces wrench effort. Slugs are split inside for easy removal. Features Maximum capacity of 10 gauge mild steel Also cuts aluminum, fiberglass and plastic Punches holes cleanly and accurately Black oxide finish Technical Information Overall Length: 1.094'' (2.8 cm) Overall Height: 0.75'' (1.9 cm) Overall Width: 1.094'' (2.8 cm)

Description Easily punch holes for 3/4-Inch EMT conduit. Has a maximum capacity of 10 gauge mild steel. Cuts aluminum, fiberglass and plastic. The optimized design that reduces wrench effort. Slugs are split inside for easy removal. Features Maximum capacity of 10 gauge mild steel Also cuts aluminum, fiberglass and plastic Punches holes cleanly and accurately Black oxide finish Technical Information Overall Length: 1.094'' (2.8 cm) Overall Height: 0.75'' (1.9 cm) Overall Width: 1.094'' (2.8 cm)

Description The 7/8-Inch Knockout Punch easily punches holes for 1/2-Inch EMT conduit. The optimized design reduces wrench effort. Slugs are split inside for easy removal. Cuts aluminum, fiberglass and plastic as well. Features Maximum capacity of 10 gauge mild steel Also cuts aluminum, fiberglass and plastic Punches holes cleanly and accurately Black oxide finish Technical Information Overall Length: 0.891'' (2.3 cm) Overall Height: 0.875'' (2.2 cm) Overall Width: 0.891'' (2.3 cm)

Description The deep, open-throat design of the Ship Auger bit clears chips for faster, cleaner cuts. The shank is 7/16-Inch hex to fit 1/2-Inch (13 mm) and larger three-jaw chucks. Used for heavy construction and repair work in mines, on docks and bridges as well as electrical work. Features Bits drill through nails, wood, vinyl, plastics, and heavy timber Special bit steel with machine-ground flutes and polished edges for smooth, wobble-free boring Head and twist are ground to correct clearance for easy removal from hole Feed-screw pilot draws bit into wood Full length is heat-treated and tempered For heavy construction and repair work in mines, on docks and bridges as well as electrical work Technical Information Bit Diameter: 1'' (25 mm) Shank Diameter: 0.4'' Twist Length: 4'' (10.2 cm) Overall Length: 6'' (15.2 cm)

Description The deep, open-throat design of the Ship Auger bit clears chips for faster, cleaner cuts. The shank is 7/16-Inch hex to fit 1/2-Inch (13 mm) and larger three-jaw chucks. Used for heavy construction and repair work in mines, on docks and bridges as well as electrical work. Features Bits drill through nails, wood, vinyl, plastics, and heavy timber Special bit steel with machine-ground flutes and polished edges for smooth, wobble-free boring Full length is heat-treated and tempered Feed-screw pilot draws bit into wood Head and twist are ground to correct clearance for easy removal from hole For heavy construction and repair work in mines, on docks and bridges as well as electrical work Technical Information Bit Diameter: 7/8'' (22 mm) Shank Diameter: 0.4'' Twist Length: 4'' (10.2 cm) Overall Length: 6'' (15.2 cm)

Description The deep, open-throat design of the Ship Auger bit clears chips for faster, cleaner cuts. The shank is 7/16-Inch hex to fit 1/2-Inch (13 mm) and larger three-jaw chucks. Used for heavy construction and repair work in mines, on docks and bridges as well as electrical work. Features Bits drill through nails, wood, vinyl, plastics, and heavy timber Special bit steel with machine-ground flutes and polished edges for smooth, wobble-free boring Head and twist are ground to correct clearance for easy removal from hole Feed-screw pilot draws bit into wood Full length is heat-treated and tempered For heavy construction and repair work in mines, on docks and bridges as well as electrical work Technical Information Bit Diameter: 3/4'' (19 mm) Shank Diameter: 0.4'' Twist Length: 4'' (10.2 cm) Overall Length: 6'' (15.2 cm)

Description These Double-Fluted Step Drill Bits provide faster cutting and drilling than single flute bits. The easy-to-read step markings and targets save time when drilling holes. Thick 3/8-Inch hex shank provides a firm, positive grip and won't spin out in the drill. Features Two flutes on this Step Drill Bit cut faster and keep bit cooler Fast-starting, non-walking drill tip High-visibility silver targets for primary hole sizes Thick 3/8-Inch hex shank won't round out in the drill chuck for a more positive grip 3 hole sizes Technical Information Application: For Multi-Material Drilling Material: M2 Steel Quick Reference: #15 Number of Holes: 3 Size: 7/8'' to 1-3/8'' (22.2 to 34.9 mm) Document Brochure

Description These Double-Fluted Step Drill Bits provide faster cutting and drilling than single flute bits. The easy-to-read step markings and targets save time when drilling holes. Thick 3/8-Inch hex shank provides a firm, positive grip and won't spin out in the drill. Features Two flutes on this Step Drill Bit cut faster and keep bit cooler Fast-starting, non-walking drill tip High-visibility silver targets for primary hole sizes Thick 3/8-Inch hex shank won't round out in the drill chuck for a more positive grip Two hole sizes Technical Information Application: For Multi-Material Drilling Overall Length: 3.15'' (8 cm) Material: High Speed Steel Quick Reference: #11 Number of Holes: 2 Size: 7/8'' to 1-1/8'' (22.2 to 28.6 mm) Document Brochure

Description These Double-Fluted Step Drill Bits provide faster cutting and drilling than single flute bits. The easy-to-read step markings and targets save time when drilling holes. Thick 3/8-Inch hex shank provides a firm, positive grip and won't spin out in the drill. Features Two flutes on this Step Drill Bit cut faster and keep bit cooler Fast-starting, non-walking drill tip High-visibility silver targets for primary hole sizes Thick 3/8-Inch hex shank won't round out in the drill chuck for a more positive grip 9 hole sizes Made from high speed steel 1/16-Inch increments Technical Information Application: For Multi-Material Drilling Material: High Speed Steel Quick Reference: #3 Number of Holes: 9 Increment: 1/16'' (1.6 mm) Size: 1/4'' to 3/4'' (6.4 to 19.1 mm) Document Brochure

Description These premium, heavy duty cable ties are used to wrap and contain cables and other items. With 50 pounds of tensile strength, these ties offer a strong hold. Made of nylon for durability. Available in 11.5-Inch lengths. Benefits Multi-purpose cable ties help manage messy cable and other items; perfect for jobsite, home, office or workshop 50-Pound (23 kg) tensile strength Self-locking with durable teeth for strong hold Angled tip for easy feed For indoor or outdoor use - UV resistant Made of high quality nylon for strength 7.75-Inch (20 cm) lengths Pack of 100 Technical Information Type: Cable Tie Application: Cable Management Special Features: Angled Tip Material: Nylon Color: Black Surface Texture: Smooth Lock Style: Self-Locking Tensile Strength: 50 lb (23 kg) Maximum Diameter: 1.75'' (4.5 cm) Temperature Range: -40° to 185°F (-40° to 85°C) Indoor/Outdoor: Yes Overall Length: 7.75'' (20 cm) Overall Height: 0.01'' (0.03 cm) Overall Width: 0.25'' (0.6 cm) Weight: 0.02 oz (0.6 g) Package Quantity: 100 Document Brochure

Description Stretch Cable Tie Roll helps organize cables, wires, cords or anything that needs bundling. Pull one end through rectangular hole on the opposite end and twist to lock in place. This exclusive design, also, features screw holes for more permanent mounting. The roll can be cut to any length needed. Benefits Stretch Cable Tie Roll helps organize cable, wires or anything that needs bundling Exclusive design features optional screw holes for mounting Easily cut to length Made in USA Self-locking at any diameter Made of heavy-duty specialty nylon to withstand time without sagging 75 feet of stretch cable tie to the roll Sold in convenient dispenser box Standalone or mountable Technical Information Type: Cable Tie Application: Cable Management Special Features: Twist and Lock Design Material: Nylon Color: Black Surface Texture: Smooth Lock Style: Twist and Lock Tensile Strength: 40 lb (18 kg) Maximum Diameter: 23.8' (7.3 m) Temperature Range: Storage: 14° to 140°F (-10° to 60°C); Operating: 32° to 122°F (0° to 50°C) Indoor/Outdoor: Yes Overall Length: 75' (23 m) Overall Height: 0.1'' (0.25 cm) Overall Width: 0.5'' (1.3 cm) Weight: 1.7 lb (0.77 kg) Document Brochure

Description Hide messy cable bundles with Klein's Cable and Wire Management Sleeves. The 3-Foot long sleeve can be cut shorter if needed. Hook and loop design lets you adjust to fit a variety of diameters. Easily wrap the durable and reusable, black sleeves around your cables to organize any space. Benefits Cable Management Sleeves help organize and hide cables at the home, office or job site 3-Foot long sleeve can be cut to shorter length if desired Made of sturdy material with hook and loop seal firmly attached with backstitching and glue ''Loop'' feature runs the entire inner surface allowing sleeve to be sealed to any diameter Flexible material for ease of use and clean look 5-Inch width allows a 1-1/4-Inch max diameter Durable and reusable 2-Pack Technical Information Type: Cable Sleeve Application: Cable Management Special Features: Adjustable Hook and Loop Color: Black Material: Neoprene Closure Type: Hook and Loop Expandable: Y Overall Length: 3' (91 cm) Overall Height: 0.1'' (0.3 cm) Overall Width: 1.25'' (3.2 cm) Diameter: 1.25'' x 3' (3.2 cm × 91 cm) Inside Diameter: 1.25'' (3.2 cm) Temperature Range: 23° to 140°F (-5° to 60°C) Weight: 3.2 oz (91 g) Document Brochure

Description Exclusive Klein-designed CAT6A Pass-Thru™ modular plugs for fast, reliable connector installations for data applications. CAT6A shielded cable easily passes through connector for consistent and secure termination. Saves time, trims flush to end face when used with Klein Tools Pass-Thru™ Modular Crimper Cat. No. VDV226-110, and eliminates wasted materials. Features Klein exclusive Pass-Thru™ Connectors provide fast, reliable connector installations for data applications For CAT6A shielded cable and larger diameter/thicker jacket CAT6 cable CAT6A cable easily passes through connector to visually ensure that wires are in the correct order for consistent and secure terminations Fully compliant with Power Over Ethernet (PoE and PoE+) standards Requires pass-through type crimping tool (Cat. No. VDV226-110 recommended) 8 position, 8 contact pass-through type data plugs for solid or stranded wire Category 6A performance per TIA/EIA-568-B.2 100-Pack 50 µ-inch gold plating on all contact surfaces Max diameter for CAT6A Pass-Thru™ Connectors is 0.043-Inch (1.1 mm) Technical Information Type: Modular Application: Data Special Features: Pass-Thru™ Technology; Meets All PoE+ Standards Overall Length: 0.8'' (2 cm) Overall Height: 0.6'' (1.5 cm) Overall Width: 0.4'' (1 cm) Material: PVC Plastic; Gold Plated Contacts Connector Type: RJ45 Cable Type: CAT6A STP and Larger Diameter CAT6 Position & Contacts: 8P 8C Connector Color: Clear Solid Conductor Wire: Yes Stranded Conductor Wire: Yes Package Quantity: 100 Weight: 10.21 oz (289 g) Document Brochure Instruction

Description Exclusive Klein-designed CAT6A Pass-Thru™ modular plugs for fast, reliable connector installations for data applications. Cable easily passes through connector for consistent and secure termination. Saves time, trims flush to end face when used with Klein Tools Pass-Thru™ Modular Crimper Cat. No. VDV226-110, and eliminates wasted materials. Features Klein exclusive Pass-Thru™ Connectors provide fast, reliable connector installations for data applications For CAT6A cable and larger diameter/thicker jacket CAT6 cable CAT6A cable easily passes through connector to visually ensure that wires are in the correct order for consistent and secure terminations Fully compliant with Power Over Ethernet (PoE and PoE+) standards Requires pass-through type crimping tool (Cat. No. VDV226-110 recommended) 8 position, 8 contact pass-through type data plugs for solid or stranded wire Category 6A performance per TIA/EIA-568-B.2 200-Pack 50 µ-inch gold plating on all contact surfaces Max diameter for CAT6A Pass-Thru™ Connectors is 0.043-Inch (1.1 mm) Technical Information Type: Modular Application: Voice and Data Special Features: Pass-Thru™ Technology; Meets All PoE+ Standards Overall Length: 0.875'' (2.2 cm) Overall Height: 0.453'' (1.2 cm) Overall Width: 0.094'' (0.2 cm) Material: PVC Plastic; Gold Plated Contacts Connector Type: RJ45 Cable Type: CAT6A UTP and Larger Diameter CAT6 Position & Contacts: 8P 8C Connector Color: Clear Solid Conductor Wire: Yes Stranded Conductor Wire: Yes Package Quantity: 200 Weight: 9.34 oz (265 g) Document Brochure Instruction

Description nVent Nuheat Cable is an easy-to-install electric floor heating system that combines installation versatility with advanced new technology. Choose the cable kit that is best suited for the size of the room/area and configure it on-site to provide floor heat in the desired areas of the room. Benefits Heats tile, stone, and laminate/engineered wood floors On-site flexibility Flexible wire spacing and heat output Compatible with nVent Nuheat Membrane Comprehensive selection of sizes to choose from Suitable for wet environments such as showers and steam rooms Redesigned, thinner cold-lead and factory splice New mid-point marker on the heating cable Technical Information Operating Voltage: 240 V Length: 358' Amperage: 4.6 amps Surface covering: 90 sq. ft. Power Output: 12 - 15 watts per square foot Maximum Ambient Temperature: 194°F (90°C) Material: Two single conductor Tefzel-coated resistance wires covered by a tin-plated copper braid and then coated with a durable copolymer (PVC) outer jacket Documents Brochure Installation Guide

Description nVent Nuheat Cable is an easy-to-install electric floor heating system that combines installation versatility with advanced new technology. Choose the cable kit that is best suited for the size of the room/area and configure it on-site to provide floor heat in the desired areas of the room. Benefits Heats tile, stone, and laminate/engineered wood floors On-site flexibility Flexible wire spacing and heat output Compatible with nVent Nuheat Membrane Comprehensive selection of sizes to choose from Suitable for wet environments such as showers and steam rooms Redesigned, thinner cold-lead and factory splice New mid-point marker on the heating cable Technical Information Operating Voltage: 240 V Length: 630' Amperage: 8.0 amps Surface covering: 160 sq. ft. Power Output: 12 - 15 watts per square foot Maximum Ambient Temperature: 194°F (90°C) Material: Two single conductor Tefzel-coated resistance wires covered by a tin-plated copper braid and then coated with a durable copolymer (PVC) outer jacket Documents Brochure Installation Guide

Description nVent Nuheat Cable is an easy-to-install electric floor heating system that combines installation versatility with advanced new technology. Choose the cable kit that is best suited for the size of the room/area and configure it on-site to provide floor heat in the desired areas of the room. Benefits Heats tile, stone, and laminate/engineered wood floors On-site flexibility Flexible wire spacing and heat output Compatible with nVent Nuheat Membrane Comprehensive selection of sizes to choose from Suitable for wet environments such as showers and steam rooms Redesigned, thinner cold-lead and factory splice New mid-point marker on the heating cable Technical Information Operating Voltage: 240 V Length: 529' Amperage: 6.8 amps Surface covering: 135 sq. ft. Power Output: 12 - 15 watts per square foot Maximum Ambient Temperature: 194°F (90°C) Material: Two single conductor Tefzel-coated resistance wires covered by a tin-plated copper braid and then coated with a durable copolymer (PVC) outer jacket Documents Brochure Installation Guide

Description nVent Nuheat Cable is an easy-to-install electric floor heating system that combines installation versatility with advanced new technology. Choose the cable kit that is best suited for the size of the room/area and configure it on-site to provide floor heat in the desired areas of the room. Benefits Heats tile, stone, and laminate/engineered wood floors On-site flexibility Flexible wire spacing and heat output Compatible with nVent Nuheat Membrane Comprehensive selection of sizes to choose from Suitable for wet environments such as showers and steam rooms Redesigned, thinner cold-lead and factory splice New mid-point marker on the heating cable Technical Information Operating Voltage: 120 V Length: 474' Covering Surface: 120 sq. ft. Amperage: 12.2 amps Power Output: 12 - 15 watts per square foot Maximum Ambient Temperature: 194 °F (90°C) Material: Two single conductor Tefzel-coated resistance wires covered by a tin-plated copper braid and then coated with a durable copolymer (PVC) outer jacket Documents Brochure Installation Guide

Description nVent Nuheat Cable is an easy-to-install electric floor heating system that combines installation versatility with advanced new technology. Choose the cable kit that is best suited for the size of the room/area and configure it on-site to provide floor heat in the desired areas of the room. Benefits Heats tile, stone, and laminate/engineered wood floors On-site flexibility Flexible wire spacing and heat output Compatible with nVent Nuheat Membrane Comprehensive selection of sizes to choose from Suitable for wet environments such as showers and steam rooms Redesigned, thinner cold-lead and factory splice New mid-point marker on the heating cable Technical Information Operating Voltage: 120 V Length: 47' Covering Surface: 12 sq. ft. Amperage: 1.2 amps Power Output: 12 - 15 watts per square foot Maximum Ambient Temperature: 194 °F (90°C) Material: Two single conductor Tefzel-coated resistance wires covered by a tin-plated copper braid and then coated with a durable copolymer (PVC) outer jacket Documents Brochure Installation Guide

Description ***Traditional hardwood is typically not recommended to be installed over an electric floor heating system because the repeated heating and cooling cycles may damage the wood. Standard Mats are the thinnest and easiest to install. Standard Mats are only 1/8” thick and eliminate the need to configure the heating wires during installation. Standard Mats come in various dimensions. Simply pick the size of the mat(s) that fits the desired heating area. Because the heating wire is embedded in the Standard Mat and does not need to be configured during installation, the heat coverage is guaranteed to be consistent throughout the desired heating area. Benefits Easy to install Error-Free Reduces installation time Does not raise floor height Comprehensive selection of sizes to choose from Nuheat is approved for installation under tile, stone, marble, laminate, engineered wood, and luxury vinyl flooring Technical Information Dimension: 10'x3.5' Amperage: 1.7 amps Power Output: 413 watts Material: Consist of a single-conductor tinned copper braided heating wire sandwiched in a pre-configured pattern between durable, two porous layers of fabric ​Operating Voltage: 240 V ​Maximum Continuous Exposure Temperature: 194°F (90°C) ​Heating Cable: Single wire with ground braid outer layer ​Cold Lead: 2-wire, 18 AWG plus ground braid layer; 10 ft (3m) length Documents Brochure Installation Instructions Mat Shower Installation Instructions List of material needed to install

Description ***Traditional hardwood is typically not recommended to be installed over an electric floor heating system because the repeated heating and cooling cycles may damage the wood. Standard Mats are the thinnest and easiest to install. Standard Mats are only 1/8” thick and eliminate the need to configure the heating wires during installation. Standard Mats come in various dimensions. Simply pick the size of the mat(s) that fits the desired heating area. Because the heating wire is embedded in the Standard Mat and does not need to be configured during installation, the heat coverage is guaranteed to be consistent throughout the desired heating area. Benefits Easy to install Error-Free Reduces installation time Does not raise floor height Comprehensive selection of sizes to choose from Nuheat is approved for installation under tile, stone, marble, laminate, engineered wood, and luxury vinyl flooring Technical Information Dimension: 7'x3.5' Amperage: 1.2 amps Power Output: 294 watts Material: Consist of a single-conductor tinned copper braided heating wire sandwiched in a pre-configured pattern between durable, two porous layers of fabric ​Operating Voltage: 240 V ​Maximum Continuous Exposure Temperature: 194°F (90°C) ​Heating Cable: Single wire with ground braid outer layer ​Cold Lead: 2-wire, 18 AWG plus ground braid layer; 10 ft (3m) length Documents Brochure Installation Instructions Mat Shower Installation Instructions List of material needed to install

Description ***Traditional hardwood is typically not recommended to be installed over an electric floor heating system because the repeated heating and cooling cycles may damage the wood. Standard Mats are the thinnest and easiest to install. Standard Mats are only 1/8” thick and eliminate the need to configure the heating wires during installation. Standard Mats come in various dimensions. Simply pick the size of the mat(s) that fits the desired heating area. Because the heating wire is embedded in the Standard Mat and does not need to be configured during installation, the heat coverage is guaranteed to be consistent throughout the desired heating area. Benefits Easy to install Error-Free Reduces installation time Does not raise floor height Comprehensive selection of sizes to choose from Nuheat is approved for installation under tile, stone, marble, laminate, engineered wood, and luxury vinyl flooring Technical Information Dimension: 6'x4' Amperage: 1.2 amps Power Output: 288 watts Material: Consist of a single-conductor tinned copper braided heating wire sandwiched in a pre-configured pattern between durable, two porous layers of fabric ​Operating Voltage: 240 V ​Maximum Continuous Exposure Temperature: 194°F (90°C) ​Heating Cable: Single wire with ground braid outer layer ​Cold Lead: 2-wire, 18 AWG plus ground braid layer; 10 ft (3m) length Documents Brochure Installation Instructions Mat Shower Installation Instructions List of material needed to install

Description ***Traditional hardwood is typically not recommended to be installed over an electric floor heating system because the repeated heating and cooling cycles may damage the wood. Standard Mats are the thinnest and easiest to install. Standard Mats are only 1/8” thick and eliminate the need to configure the heating wires during installation. Standard Mats come in various dimensions. Simply pick the size of the mat(s) that fits the desired heating area. Because the heating wire is embedded in the Standard Mat and does not need to be configured during installation, the heat coverage is guaranteed to be consistent throughout the desired heating area. Benefits Easy to install Error-Free Reduces installation time Does not raise floor height Comprehensive selection of sizes to choose from Nuheat is approved for installation under tile, stone, marble, laminate, engineered wood, and luxury vinyl flooring Technical Information ​Mat Dimension: 9'x4' Amperage: 3.6 amps Power Output: 432 watts Material: Consist of a single-conductor tinned copper braided heating wire sandwiched in a pre-configured pattern between durable, two porous layers of fabric ​Operating Voltage: 120 V ​Maximum Continuous Exposure Temperature: 194°F (90°C) ​Heating Cable: Single wire with ground braid outer layer ​Cold Lead: 2-wire, 18 AWG plus ground braid layer; 10 ft (3m) length Documents Brochure Installation Instructions Mat Shower Installation Instructions List of material needed to install

Description nVent Nuheat Cable is an easy-to-install electric floor heating system that combines installation versatility with advanced new technology. Choose the cable kit that is best suited for the size of the room/area and configure it on-site to provide floor heat in the desired areas of the room. Benefits Heats tile, stone, and laminate/engineered wood floors On-site flexibility Flexible wire spacing and heat output Compatible with nVent Nuheat Membrane Comprehensive selection of sizes to choose from Suitable for wet environments such as showers and steam rooms Redesigned, thinner cold-lead and factory splice New mid-point marker on the heating cable Technical Information Operating Voltage: 240 V Length: 80' Ampage: 0.9 amps Surface covering: 20 sq. ft. Power Output: 12 - 15 watts per square foot Maximum Ambient Temperature: 194°F (90°C) Material: Two single conductor Tefzel-coated resistance wires covered by a tin-plated copper braid and then coated with a durable copolymer (PVC) outer jacket Documents Brochure Installation Guide

Description ***Traditional hardwood is typically not recommended to be installed over an electric floor heating system because the repeated heating and cooling cycles may damage the wood. Standard Mats are the thinnest and easiest to install. Standard Mats are only 1/8” thick and eliminate the need to configure the heating wires during installation. Standard Mats come in various dimensions. Simply pick the size of the mat(s) that fits the desired heating area. Because the heating wire is embedded in the Standard Mat and does not need to be configured during installation, the heat coverage is guaranteed to be consistent throughout the desired heating area. Benefits Easy to install Error-Free Reduces installation time Does not raise floor height Comprehensive selection of sizes to choose from Nuheat is approved for installation under tile, stone, marble, laminate, engineered wood, and luxury vinyl flooring Technical Information Dimension: 5'x3.5' Amperage: 0.9 amps Power Output: 210 watts Material: Consist of a single-conductor tinned copper braided heating wire sandwiched in a pre-configured pattern between durable, two porous layers of fabric ​Operating Voltage: 240 V ​Maximum Continuous Exposure Temperature: 194°F (90°C) ​Heating Cable: Single wire with ground braid outer layer ​Cold Lead: 2-wire, 18 AWG plus ground braid layer; 10 ft (3m) length Documents Brochure Installation Instructions Mat Shower Installation Instructions List of material needed to install

Description ***Traditional hardwood is typically not recommended to be installed over an electric floor heating system because the repeated heating and cooling cycles may damage the wood. Standard Mats are the thinnest and easiest to install. Standard Mats are only 1/8” thick and eliminate the need to configure the heating wires during installation. Standard Mats come in various dimensions. Simply pick the size of the mat(s) that fits the desired heating area. Because the heating wire is embedded in the Standard Mat and does not need to be configured during installation, the heat coverage is guaranteed to be consistent throughout the desired heating area. Benefits Easy to install Error-Free Reduces installation time Does not raise floor height Comprehensive selection of sizes to choose from Nuheat is approved for installation under tile, stone, marble, laminate, engineered wood, and luxury vinyl flooring Technical Information Dimension: 5'x3' Amperage: 0.8 amps Power Output: 180 watts Material: Consist of a single-conductor tinned copper braided heating wire sandwiched in a pre-configured pattern between durable, two porous layers of fabric ​Operating Voltage: 240 V ​Maximum Continuous Exposure Temperature: 194°F (90°C) ​Heating Cable: Single wire with ground braid outer layer ​Cold Lead: 2-wire, 18 AWG plus ground braid layer; 10 ft (3m) length Documents Brochure Installation Instructions Mat Shower Installation Instructions List of material needed to install

Description ***Traditional hardwood is typically not recommended to be installed over an electric floor heating system because the repeated heating and cooling cycles may damage the wood. Standard Mats are the thinnest and easiest to install. Standard Mats are only 1/8” thick and eliminate the need to configure the heating wires during installation. Standard Mats come in various dimensions. Simply pick the size of the mat(s) that fits the desired heating area. Because the heating wire is embedded in the Standard Mat and does not need to be configured during installation, the heat coverage is guaranteed to be consistent throughout the desired heating area. Benefits Easy to install Error-Free Reduces installation time Does not raise floor height Comprehensive selection of sizes to choose from Nuheat is approved for installation under tile, stone, marble, laminate, engineered wood, and luxury vinyl flooring Technical Information ​Mat Dimension: 9' x 3' Amperage: 2.7 amps Power Output: 324 watts Material: Consist of a single-conductor tinned copper braided heating wire sandwiched in a pre-configured pattern between durable, two porous layers of fabric ​Operating Voltage: 120 V ​Maximum Continuous Exposure Temperature: 194°F (90°C) ​Heating Cable: Single wire with ground braid outer layer ​Cold Lead: 2-wire, 18 AWG plus ground braid layer; 10 ft (3m) length Documents Brochure Installation Instructions Mat Shower Installation Instructions List of material needed to install

Description ***Traditional hardwood is typically not recommended to be installed over an electric floor heating system because the repeated heating and cooling cycles may damage the wood. Standard Mats are the thinnest and easiest to install. Standard Mats are only 1/8” thick and eliminate the need to configure the heating wires during installation. Standard Mats come in various dimensions. Simply pick the size of the mat(s) that fits the desired heating area. Because the heating wire is embedded in the Standard Mat and does not need to be configured during installation, the heat coverage is guaranteed to be consistent throughout the desired heating area. Benefits Easy to install Error-Free Reduces installation time Does not raise floor height Comprehensive selection of sizes to choose from Nuheat is approved for installation under tile, stone, marble, laminate, engineered wood, and luxury vinyl flooring Technical Information ​Mat Dimension: 3'4" x 2'3" Amperage: 0.8 amps Power Output: 90 watts Material: Consist of a single-conductor tinned copper braided heating wire sandwiched in a pre-configured pattern between durable, two porous layers of fabric ​Operating Voltage: 120 V ​Maximum Continuous Exposure Temperature: 194°F (90°C) ​Heating Cable: Single wire with ground braid outer layer ​Cold Lead: 2-wire, 18 AWG plus ground braid layer; 10 ft (3m) length Documents Brochure Installation Instructions Mat Shower Installation Instructions List of material needed to install

Description ***Traditional hardwood is typically not recommended to be installed over an electric floor heating system because the repeated heating and cooling cycles may damage the wood. Standard Mats are the thinnest and easiest to install. Standard Mats are only 1/8” thick and eliminate the need to configure the heating wires during installation. Standard Mats come in various dimensions. Simply pick the size of the mat(s) that fits the desired heating area. Because the heating wire is embedded in the Standard Mat and does not need to be configured during installation, the heat coverage is guaranteed to be consistent throughout the desired heating area. Benefits Easy to install Error-Free Reduces installation time Does not raise floor height Comprehensive selection of sizes to choose from Nuheat is approved for installation under tile, stone, marble, laminate, engineered wood, and luxury vinyl flooring Technical Information ​Mat Dimension: 6'x3.5' Amperage: 2.1 amps Power Output: 252 watts Material: Consist of a single-conductor tinned copper braided heating wire sandwiched in a pre-configured pattern between durable, two porous layers of fabric ​Operating Voltage: 120 V ​Maximum Continuous Exposure Temperature: 194°F (90°C) ​Heating Cable: Single wire with ground braid outer layer ​Cold Lead: 2-wire, 18 AWG plus ground braid layer; 10 ft (3m) length Documents Brochure Installation Instructions Mat Shower Installation Instructions List of material needed to install

Description ***Traditional hardwood is typically not recommended to be installed over an electric floor heating system because the repeated heating and cooling cycles may damage the wood. Standard Mats are the thinnest and easiest to install. Standard Mats are only 1/8” thick and eliminate the need to configure the heating wires during installation. Standard Mats come in various dimensions. Simply pick the size of the mat(s) that fits the desired heating area. Because the heating wire is embedded in the Standard Mat and does not need to be configured during installation, the heat coverage is guaranteed to be consistent throughout the desired heating area. Benefits Easy to install Error-Free Reduces installation time Does not raise floor height Comprehensive selection of sizes to choose from Nuheat is approved for installation under tile, stone, marble, laminate, engineered wood, and luxury vinyl flooring Technical Information ​Mat Dimension: 8'x3' Amperage: 2.4 amps Power Output: 288 watts Material: Consist of a single-conductor tinned copper braided heating wire sandwiched in a pre-configured pattern between durable, two porous layers of fabric ​Operating Voltage: 120 V ​Maximum Continuous Exposure Temperature: 194°F (90°C) ​Heating Cable: Single wire with ground braid outer layer ​Cold Lead: 2-wire, 18 AWG plus ground braid layer; 10 ft (3m) length Documents Brochure Installation Instructions Mat Shower Installation Instructions List of material needed to install