Dimmers & Switches

Description The Maestro Fan Control and Light Dimmer for dimmable LEDs, Incandescent and Halogen bulbs come equipped with Lutron FASS technology which makes it safe and easy to replace your light bulb by cutting off power from the light and fan. Its clean finish gives it an attractive appearance in any room. Benefits Touch Rocker to Adjust light level/ fan speed Indicator lights display light level and fan speed Low-end adjustment to accommodate a wide range of bulbs Can control up to 75W dimmable CFL/LED or 250 Incandescent/Halogen lighting loads Lutron Smart Bridge Required, for smart home automation compatibility Capable of controlling up to 1.5A paddle-type ceiling fans Provides the best dimming performance for dimmable LED bulbs Programmable fade of the dimmer gradually turns lights on, allowing your eyes to adjust to the change in light, and gradually fade off, allowing time to exit a room before the lights turn off Dimmer works with up to 75W of dimmable LEDs or CFLs or up to 250W of incandescent or halogen. Fan control works with up to 1.5a Ceiling paddle Fan Fan control provides 4 quiet Fan speeds for increased comfort For use in single-pole applications Documents INSTALLATION: How To Install your Fan Control & Light Dimmer

Description The Diva LED+ dimmer switch provides optimal dimming performance of LED bulbs. This dimmer switch works with up to 150-Watt of dimmable LED/CFL or 600-Watt of incandescent/halogen, allowing you to control multiple bulb types on the same circuit. It is designed to control a broad range of dimmable LED and CFL bulbs from a variety of brands including Philips, Cree, GE, EcoSmart and Lighting Science. The Diva dimmer switch features a paddle switch to turn your lights off or on returning the lights to your favorite level. This dimmer switch also features a discreet slide control next to the switch, allowing you to adjust the lights for any activity. Coordinating Claro wall plate sold separately. Features Tested on 1,000s of bulbs and dozens of brands for flicker-free dimming. Provides over 250 lighting levels so you can create the perfect light for any activity Works with up to 150-Watt of dimmable LED/CFL bulbs or 600-Watt of incandescent/halogen bulbs Lutron patented technology to optimize the dim range of your bulb and prevent interference with other dimmers in the home Can be used in single-pole or 3-Way applications with a mechanical switch. Rocker switch turns lights on/off to favorite light level. Discreet slider dims and brightens the lights Installs in as little as 15 minutes in homes of all ages – NO NEUTRAL REQUIRED Document Installation Manual Specification sheet

Description The Diva 0-10V dimmer switch is a simple solution is designed to match existing design style switches and accessories. Easily turn the lights on and off with a paddle switch, and use the slide control to adjust the lights to the perfect level. The new Diva 0 - 10-Volt dimmer switch is a 0-10 VDC dimmer with 3-way functionality for 3rd party 0-10-Volt fixtures (LED and fluorescent), no separate power pack required. Coordinating wall plate sold separately. Controls 0-10 V LED or fluorescent fixture loads, 50 mA max control current. Paddle turns on/off. Slide up to brighten, down to dim. Features For use in controlling 0-10-Volt LED drivers and/or fluorescent ballasts No neutral wire or power pack required Large paddle switch with a captive linear-slide control for a standard designer-opening wall plate Can be used in single pole or 3-way applications Easily replaces existing switch and installs in as little as 15 minutes (no neutral wire required) Includes (1) Diva 0-10V dimmer switch; coordinating wall plate sold separately Document Instruction Spec Sheet

Description Highly versatile Heavy-Duty Timers are ideal for any application that requires a simple or complex ON/OFF schedule, regardless of load. No neutral connection is required. *NOTE: Not for use with sunlamps, saunas, or loads that could cause personal injury if timed incorrectly. Features Versatile 7-day programmable schedules with up to 40 ON/OFF events Astronomic clock feature determines dawn and dusk times Automatic Daylight Saving Time (DST) adjustment Random mode varies ON/OFF schedule to provide a "lived-in" appearance Single or 3-way switch compatible installation Incandescent/fluorescent/CFL/LED compatible Isolated switch allows timer to be used with any load type, including AC and DC loads Replaceable CR2 lithium battery provides up to three years of operation No neutral wire connection enables easy retrofitting and quicker installation Decorator switch plate not included Technical Information Minimum ON/OFF Times: 1 min Maximum ON/OFF Operations: 40 Operation Mode: 24 hour Operation Features: Astronomic; Daylight Saving Time Mechanism Type: Digital/Electrical Backup Type: Battery Backup Protection Time: 3 Years Battery Type: CR2 Lithium Battery Service Type: Replaceable Application Compatibilities: Incandescent; Fluorescent; CFL; LED Wall Plate Configurations: Single-Gang Product Dimensions (H x W x D) in: 4.125 x 1.75 x 1.8125 in Color: White Load Ratings Resistive Heater: 15 A, 120-277 VAC Tungsten (Incandescent) Range(s): 1800 W, 120 VAC; 1248-1662 W, 208-277 VAC Ballast Fluorescent: 8 A, 120 VAC; 4 A, 208-277 VAC Electronic Ballast LED: 5 A, 120 VAC; 2 A, 277 VAC DC Loads: 4 A, 12 VDC; 2 A, 28 VDC Motor Load Ratings Ranges: 1 HP, 120 VAC; 2 HP, 240 VAC Max Load Handling Capability: 15 A Inductive Load Ratings Ranges: 8 A, 120 VAC, 50/60 Hz; 4 A, 208-277 VAC, 50/60 Hz Input Voltage Range(s): 120-277 VAC, 50/60 Hz Wiring Configurations: Single; 3-Way Neutral Connection Required: No Temperature (operation): 32 - 104 °F / 0 - 40 °C CSA Certification: cCSAus Country of Origin (Intermatic): THAILAND Warranty Period: 1-Year limited Document Technical Sheet Instruction In-Wall Timer Brochure

Description The Lutron Maestro occupancy sensor switch combines a Maestro switch with a passive infrared occupancy or vacancy sensor. The sensor detects the heat from occupants moving within an area to determine whether the space is occupied. Based on the feedback from the sensor, the occupancy sensor switch will adjust the load accordingly. They’re ideal for rooms where lights are accidentally left on, such as an office, or rooms that you often enter with your hands full, such as a laundry room or supply closet. ****REQUIRES GROUND WIRE**** **Wall plate not included** Features Passive infrared sensors with exclusive Lutron XCT Technology* for fine motion detection 180° sensor field-of-view Up to 30ft x 30ft (9m x 9m) [900 ft² (81m²)] major motion coverage and 20ft x 20ft (6m x 6m) [400ft² (36m²)] minor motion coverage Occupancy version can be set to Auto-ON/Auto-OFF or Manual-ON/Auto-OFF Adjustable timeout (1, 5, 15, or 30 minutes) and high/low sensitivity adjustment Load types: incandescent, halogen, ELV, MLV, CFL, LED, magnetic fluorescent, electronic fluorescent, and fan With the ambient light detection, lights turn on only if natural light in room is low Can be use in 3-Way locations *Advanced sensing technology for fine motion detection ensures that the lights stay on while the room is occupied, and that the sensor does not turn on falsely when there is no occupancy in the room. Technical Information Colour: White Voltage: 120V Load capacity: 600W incandescent, halogene, ELV. 450W MLV 360W LED/CFL 5A Ballasts 3A (1/10HP) Fan 3A Combined fan and light load Mounting Type: Wall Mount Switch Style: Push Button Document Specification Sheet User Manual

Description The Swidget product line has been developed to support the easy integration of Home Automation and Smart Home markets with unique and flexible solutions. Interchangeable Swidget Inserts can be installed, removed or replaced - making Swidget the optimal choice for building renovations and new construction. Adding a Swidget Insert turns the wired device into a powerful and flexible Smart Home device. The interchangeability of the Swidget Inserts ensure that the system can work with any existing or future Smart Home wireless system. Designed to be integrated into all major Smart Home protocols, the Swidget Wi-Fi Control transforms the Swidget Outlet or Switch into a Wi-Fi smart device. Using the free Swidget App (available for Android and iOS), unlock your Swidget device to perform any numberof tasks: Power On/Off your outlet Monitor your energy consumption Schedule devices to conserve energy Set multiple automatic notifications including when your power consumption is too high As all Swidget Inserts operate on the Class 2 certified interface, an electrician is not required for installation or removal. When connected to a 2.4GHz Wi-Fi network, the Temperature, Humidity & Motion Insert can be used to create sensor-based automations, where temperature, humidity and motion can trigger actions in switches, outlets, send notifications, and more. Sensor information can also be relayed to various control systems, including Alexa and Google Assistant*, for use in a variety of applications. Features Wi-Fi 2.4GHz Independent power monitoring on each circuit Works with Amazon Alexa, Google Assistant and IFTTT* Regular OTA upgrades to expand capabilities * 3rd party integrations are controlled and managed by external service providers. Swidget makes no warranty that these services will continue to exist or be supported over the full life of the product. Technical Information Document Brochure Data Sheet

Description Start automating and controlling your small appliances, fans and motors using the Decora Smart Wi-Fi Plug-in Outlet. Use the free My Leviton iOS or Android app to add/name devices and to control them individually or as a room with a single button push. Create schedules, scenes and customize your experience as desired. Add an Amazon Alexa or Google Assistant device to use voice commands like, "Alexa, turn the floor fan on". Rated for motor loads up to 3/4 HP including appliances, lamps, fans, fountains and more no new wiring required. Customize your experience with adjustable fade rates, maximum/minimum illumination levels, and more if desired. Ideal for any residential setting where remote ON/OFF switching of appliances, motor loads up to 3/4 HP, or freestanding lights, including LED, Incandescent, Inductive, Fluorescent or Compact Fluorescent loads is needed. Typical applications include switching of lamps, portable fans, kitchen appliances, indoor fountains and more. Reduce energy consumption, provide dramatic scene transitions, and utilize the affordable plug-in for wireless control of lamps, small appliances, holiday lighting and more. Features Works with either 2.4 GHz or 5 GHz Networks Compact allows two (sold separately) to be plugged into same receptacle Control your lights from anywhere using the free My Leviton app for iOS and Android, no hub required Voice Control using Amazon Alexa and Google Assistant devices (sold separately) Integrate with IFTTT, utilize auto-shutoff in closets, hallways and bathrooms; plus engage home vs. away to enact randomization of lighting control Simplify control of your home - schedule lights and connected loads to turn on/off at specific times or based on sunrise/sunset, easily group your smart devices into rooms, and create scenes to activate multiple lights at once Designed and engineered in USA; the complete solution (hardware, app and cloud) is manufactured by Leviton Quiet relay switching Indoor use Green LED locator Manual On/Off Control Scene and zone control integration 2-way status updates Protected memory maintains ON/OFF status of loads and during minor power fluctuations Button for ON/OFF manual control Control up to 99 devices, 50 rooms, 50 activities, and 50 schedules per residence and up to 20 residences per account. 5 Year Limited Warranty Technical Information Feature: Indoor Only Hub Required: No Hub Required Product Line: Decora Smart Smart Home Protocol: Wi-Fi Type: Mini Plug-in Outlet Warranty: 5 Year Limited Works With: Alexa, Google Home, SmartThings, Nest, Ring, IFTTT Documents Specification Sheet Brochure Installation Manual

Description The Leviton Humidity Sensor and Fan Control automatically detects excess humidity in a room and activates the ventilation fan to lessen condensation, which helps reduce mold and mildew. Additionally, the device helps reduce energy usage by automatically operating the fan only when needed. The sensor uses a microprocessor combined with state-of-the-art digital sensing technology to continuously monitor and manage humidity levels when installed in areas of the home prone to condensation and mildew. It features user-friendly controls to adjust sensitivity, humidity level and time out settings. The sensor can replace a single pole switch (DHS05) or a combination switch (DHD05) and can be used with most bathroom or ventilation fans or fan/light combinations. These devices offer flexible installation options, including wiring with a neutral or by using an earth ground connection, and a slim profile for ease of installation. Features Ideal for Bathroom, basement, laundry room and home spa Replaces a single pole switch for control of a ventilation fan or fan/light combination Automatically detects excess humidity in a room and activates the ventilation fan to lessen condensation which helps reduce mold and mildew Helps reduce energy usage by automatically operating the fan only when needed For use with ventilation fans up to ¼ HP Compatible with LED, CFL, Incandescent, Halogen, MLV and ELV lighting loads Can be connected to Neutral wire if Neutral is present in the wallbox; or to Earth ground if no Neutral wire is present in the wallbox Interchangeable line and load wires saving installation time Microprocessor control with digital sensing technology Zero Cross turn-on technology extends the life of switching relays Advanced sensing enhances detection when the room is occupied and minimizes false triggers when unoccupied Operating Modes for bath fan, air cycle and humidistat Test mode to help with sensor placement and setting adjustments Can be used to comply with the requirements of 2019/2022 California Title 24, Part 6, Indoor Air Quality and Mechanical Ventilation Complies with the requirements of 2019/2022 CALGREEN, Part II, Indoor Air Quality and Exhaust Meets requirements of ASHRAE 6 Technical Information Adjustment: Programmable Color: White Dimensions: W 1.73" X D 0.95" X H 4.13" Grade: Residential LED Color: Green and Red Load Rating: 600W Incandescent, 300W LED/CFL, 400VA ELV, 400VA MLV, 1/4th HP Motor Neutral: Optional Power Consumption: <0.5 Watts Sensor Type: Humidity Style Name: Decora Switch: Relay Switch Type: Single-Pole Time Delay: 10, 20, 30 or 45 minutes Voltage: 120 VAC Wallplate: Not Included Warranty: 5-Year Limited Wiring: Ground or Neutral Required ASHRAE 62.2: Yes CALGREEN: Yes California Title 24: Yes Standards and Certifications: CSA Document Brochure Sensor Buying Guide Instruction

Description Lutron wireless dual-pedestal conveniently angles 2x Pico remotes for tabletop use. They are weighted with a non-slip base making your remotes always easy to find. Benefits Holds 2x Pico remotes for convenient access Non-slip weighted base prevents the table stand from tipping over Padded base protects your tabletop from scratches Beautiful gloss finish Can be used with Pico remote that controls Serena shades Easy to install Pico remote sold separately Can be placed on your nightstand, coffee table, or any flat surface Documents Specification sheet

Description The Decora Slide Color Change Kit is designed for an easy, cost-effective way to change the color of the Decora Slide dimmers and fan speed control without having to install a new device. It’s as easy as removing the current face and snapping on the new color. Benefits Decora Slide Dimmer and Fan Speed Control Color Change Kit No locator light For use with DSE06, DS710, DSX10, DSX12, DSH06, DSH08 dimmers, and DSF01 fan speed control Easy to install Available in white, ivory, light almond, gray, black, brown and red Technical Information Colour: Black Type: Colour Change Kit

Description The Sunnata Touch LED+ dimmer switch with LED+ Technology features a large intuitive paddle to turn lights On/Off and a sleek touch bar to easily dim/brighten your lights. This touch dimmer switch is rated to control lighting loads up to 150W LED or 600W incandescent/halogen. Use with the Sunnata accessory switch (ST-AS-xx) to create a 3-way application or add more accessory switches to control from up to 10 locations in a multi-location application. The Sunnata Touch LED+ Dimmer provides dimming, while the Sunnata Accessory Switch (ST-AS-xx) allows for On/Off switching within the multi-location application; can also be used with an existing 3-way switch. Tap the top of the dimmer switch once for your favorite light level, set through MyLevel Personalization, and twice for full brightness; swipe your finger along the white LED lightbar to dim/brighten the lighting load. The smooth fade on and fade off allows your eyes to adjust comfortably to your determined light level; push and hold the Off button for 30 second delayed fade-to-off. No neutral required. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately). Features Touch technology with intuitive on/off paddle switch that fits in a standard designer wall plate opening. Advanced dimming technology designed for compatibility with a broad range of high efficacy bulbs. Dimmers and switches contain MyLevel Personalization Advanced Feature Mode to customize the control. Low-end and high-end adjustments to accommodate a wide range of bulbs. White light bar provides locator light to easily find the switch in the dark. Brightness of locator light is adjustable through MyLevel Personalization. Locator light can also be turned off. Can be used in single-pole, multi-location1 , or 3-way mechanical switch2 applications. Coordinating Claro and Stainless Steel wall plates available separately. 100% factory tested. NEMA SSL-7A Compliant. UL® Listed Technical Information Neutral Required: No Compatible with mechanical switch: Yes. See instruction Companion: ST-AS Number of Locations: 10 Identical Companion: No Load Types Controlled: LED/CFL/Incandescent/Halogen Minimum Load: 1 LED/1 CFL/ 25w Incandescent-Halogen Maximum Load: 150w LED/CFL - 600w Incandescent/Halogen Voltage: 120Vac Document Brochure Spec Sheet Programmation

Description Passive infrared sensors that automatically control the lights in an area. These sensors detect heat from occupants moving within an area to determine when the space is occupied. Combines a Maestro 0-10 V dimmer with an occupancy sensor. Controls 1-10 VDC electronic fluorescent ballast or LED driver load types. Passive infrared motion detection with exclusive Lutron XCT Technology for fine motion detection. 180 degree sensor field-of-view. Up to 30 ft x 30 ft (9 m x 9 m) [900 ft2 (81 m2)] major motion coverage and 20 ft x 20 ft (6 m x 6 m) [400 ft2 (36 m2)] minor motion coverage. Can be set to auto-on/auto-off or manual-on/auto-off. Adjustable timeout (1, 3, 5, 15, or 30 minutes). Adjustable settings for auto-on light level (occupied level): 100 %, 50 %, last light level, or locked preset light level. Adjustable sensitivity level: High, med, low, min. Off warning fades lights to off over a period of 10 seconds. Advanced Maestro dimmer features available (locked preset, fade-to-on, and fade-to-off, etc.). Adaptive switching algorithm for extended relay life. Smart ambient light detection (ALD). Works with a single standard mechanical 3-way switch or up to 9 companion dimmers/switches. High-end trim and low-end trim to adjust maximum and minimum light levels. Selectable dimming curve-linear or square law. Miswire and incompatible load alert Features Controls 0–10 V- electronic fluorescent ballasts or LED driver load types* Passive infrared motion detection with exclusive Lutron XCT Technology for fine motion detection 180° sensor field-of-view Up to 30 ft × 30 ft (9 m × 9 m) [900 ft2 (81 m2)] major motion coverage and 20 ft × 20 ft (6 m × 6 m) [400 ft2 (36 m2)] minor motion coverage Occupancy version can be set to auto-on/auto-off or manual-on/auto-off Vacancy version available to meet CA Title 24 requirements Adjustable timeout (1, 5, 15, or 30 minutes) Adjustable settings for auto-on light level (occupied level): 100%, 50%, last light level, or locked preset light level Adjustable sensitivity level: High, Med, Low, Min Off warning fades lights to off over a period of 10 seconds Advanced Maestro dimmer features available (locked preset, fade-to-on, and fade-to-off, etc.) Adaptive switching algorithm for extended relay life Document Spec Sheet Instruction

Description Next generation timers with sleek, modern design and intuitive programming. Works with Amazon Alexa and Google Assistant; no hub required. Neutral required. Easily schedule lights and connected loads to turn on/off at specific times or based on sunrise/sunset. *NOTE: Not for use with sunlamps, saunas, or loads that could cause personal injury if timed incorrectly. Features Single-pole or 3-way switches Ability to text/email saved schedules 7-Day Timer with Automatic Daylight Saving and Astronomic ON/OFF at Dusk or Dawn Sleek, Modern Design Remote Access from anywhere, no hub required Wi-Fi not needed for initial setup and scheduling Fully set and schedule at the timer or via the Ascend app Automatic Astronomic ON/OFF dusk and dawn times to provide the most accurate lighting schedule possible Automatic Daylight Saving Time (DST) Adjustment Three pre-programmed schedule templates for convenience Supporting mobile app available on Apple app store and on Google play store Technical Information Minimum ON/OFF Times: 1 min Maximum ON/OFF Operations: 42 Operation Mode: 24 hour; 7 day Operation Features: Astronomic; Daylight Saving Time Mechanism Type :Digital/Electrical Backup Type: Battery Battery Type: Lithium Metal Battery Service Type: Non-replaceable Application Compatibilities: CFL; Fluorescent; Incandescent; LED Chemical Composition of the Battery Cell: Lithium Number of Batteries: Included 1 Battery Weight (grams): 3.2g Number of Lithium Metal Cells in Battery: 1 Watt Hours Per Battery: 0.66 Lithium Content (grams) in Battery: 0.109 Wall Plate Configurations: Single-Gang Product Dimensions (H x W x D) in: 2 3/4 x 1 3/4 x 1 1/3 in Color: White Has WiFi: Yes Load Ratings General Purpose: 15 A Electronic Ballast LED: 5 A, 600 W Motor Load Ratings Ranges: 1 HP, 120 VAC, 50/60 Hz Inductive Load Ratings Ranges: 15 A, 120 VAC, 50/60 Hz Incandescent Load Ratings (Multi-Gang): 8 A, 120 VAC, 50 Hz; 8 A, 60 Hz Incandescent Multi Gang Load Ratings Ranges: 8 A, 120 VAC, 50/60 Hz Tungsten Load Ratings: 8 A Input Voltage Range(s): 120 VAC, 50/60 Hz Wiring Configurations: 3-Way; Single Neutral Connection Required: Yes Temperature (operation): -4 - 122 °F / -20 - 50 °C UL Certification: cULus Country of Origin (Intermatic): THAILAND Warranty Period: 3-Year limited Document Technical Sheet Instruction Quick setup guide In-Wall Brochure Sell sheet Latitude and Longitude guide

Description This series offers an easy way to upgrade from a basic mechanical time switch to an electronic time switch. These timers will allow for up-to-the-minute programming, battery backup for power loss, up to 28 events total, and automatic daylight saving time corrections without the need of user interaction. They come in standard 24-hour, 7-day and 7-day astronomic versions. Features Selector switch to determine input voltage between 120-277 VAC Up to 28 events total To-the-minute accuracy Temporary override or permanent manual override Automatic Daylight Saving Time adjustment Astronomic models enable dusk-to-dawn scheduling Technical Information Minimum ON/OFF Times: 1 min Maximum ON/OFF Times: Indefinite Maximum ON/OFF Operations: 14 Setpoint Program Count: 14 ON/OFF Operations: 14 Operation Features: Astronomic Operation Mode: 7 day Daylight Savings Adjustment: Automatic Backup Type: Battery Battery Type: AAA Battery Service Type: Field Serviceable Enclosure Type:Indoor type 1 metal Product Dimensions (H x W x D) in: 7.875 x 5.125 x 3.4375 in Wire Size Min: #14 AWG Wire Size Max: #8 AWG Knockout Dimensions Bottom: (2) combination 1/2" - 3/4" Knockout Dimensions Back: (1) combination 1/2" - 3/4" Load Ratings Tungsten Range(s): 5 A, 120-240 VAC Electronic Ballast Load Ratings Ranges: 1 A, 120-277 VAC Magnetic Ballast (NO) Range(s): 20 A, 120-277 VAC Resistive (NO) Range(s): 20 A, 28 VDC; 30 A, 120/240 VAC Inductive Load Ratings NO Ranges: 30 A, 120/240 VAC Resistive Load Ratings Ranges: 20 A, 28 VDC; 30 A, 120/240 VAC Tungsten (NO) Range(s): 5 A, 120/240 VAC Motor Load Ratings Ranges: 1 HP, 120 VAC; 2 HP, 240 VAC Motor Load Ratings NO Ranges: 1 HP, 120 VAC; 2 HP, 240 VAC Voltage Selection Type: Selector Switch Wiring Option: Terminals Input Voltage Range(s): 120-277 VAC, 50/60 Hz Number of Circuits: 1 Switch Type: SPST Maximum Power Consumption (W): 6 W Unit Carton Dimensions (H x W x L) in: 3.131 x 5.251 x 8.001 in Temperature (operation): -40 °F to 104 °F / (-40 °C to 40 °C) Country of Origin (Intermatic): CHINA Warranty Period: 1-Year limited Document Brochure Technical Information Instruction

Description The Leviton Humidity Sensor and Fan Control automatically detects excess humidity in a room and activates the ventilation fan to lessen condensation, which helps reduce mold and mildew. Additionally, the device helps reduce energy usage by automatically operating the fan only when needed. The sensor uses a microprocessor combined with state-of-the-art digital sensing technology to continuously monitor and manage humidity levels when installed in areas of the home prone to condensation and mildew. It features user-friendly controls to adjust sensitivity, humidity level and time out settings. The sensor can replace a single pole switch (DHS05) or a combination switch (DHD05) and can be used with most bathroom or ventilation fans or fan/light combinations. These devices offer flexible installation options, including wiring with a neutral or by using an earth ground connection, and a slim profile for ease of installation. Features Ideal for Bathroom, basement, laundry room and home spa Replaces a combination switch for separate control of fan and lighting Automatically detects excess humidity in a room and activates the ventilation fan to lessen condensation which helps reduce mold and mildew Helps reduce energy usage by automatically operating the fan only when needed For use with ventilation fans up to ¼ HP Compatible with LED, CFL, Incandescent, Halogen, MLV and ELV lighting loads Can be connected to Neutral wire if Neutral is present in the wallbox; or to Earth ground if no Neutral wire is present in the wallbox Microprocessor control with digital sensing technology Zero Cross turn-on technology extends the life of switching relays Advanced sensing enhances detection when the room is occupied and minimizes false triggers when unoccupied Operating Modes for bath fan, air cycle and humidistat Test mode to help with sensor placement and setting adjustments Can be used to comply with the requirements of 2019/2022 California Title 24, Part 6, Indoor Air Quality and Mechanical Ventilation Complies with the requirements of 2019/2022 CALGREEN, Part II, Indoor Air Quality and Exhaust Meets requirements of ASHRAE 62.2 Color change kits are available in Black, Brown, Gray, Ivory, Light Almond and White (DHDKT-00x) Five-Year Limited warranty Technical Information Adjustment: Programmable Color: White Dimensions: W 1.73" X D 0.95" X H 4.13" Grade: Residential LED Color: Green and Red Load Rating: Fan Load (Blue Wire): 1/4 HP Fan, 300W LED/CFL, 600W Incandescent/Halogen, 400VA MLV/ELV. Light Load (Red Wire): 150W LED/CFL, 250W Incandescent/Halogen, 200VA MLV, 250VA ELV, 2A Resistive Mounting Type: Wall Switch Neutral: Optional Power Consumption: <0.5 Watts Sensor Type: Humidity Style Name: Decora Switch: Relay Switch Type: Single-Pole/Single Pole Time Delay: 10, 20, 30 or 45 minutes Voltage: 120 VAC Wallplate: Not Included Warranty: 5-Year Limited Wiring: Ground or Neutral Required ASHRAE 62.2: Yes CALGREEN: Yes California Title 24: Yes Standards and Certifications: CSA Document Brochure Sensor Buying Guide Instruction

Description Sunnata Accessory switch. Can be used only with Sunnata LED+ dimmer, model STCL-153M. Add up to 9 ST-AS accessory switches to control one light from up to 10 locations. Documents Specification Sheet Installation Manual Brochure

Description The Swidget product line has been developed to support the easy integration of Home Automation and Smart Home markets with unique and flexible solutions. Interchangeable Swidget Inserts can be installed, removed or replaced - making Swidget the optimal choice for building renovations and new construction. Adding a Swidget Insert turns the wired device into a powerful and flexible Smart Home device. The interchangeability of the Swidget Inserts ensure that the system can work with any existing or future Smart Home wireless system. Designed to be integrated into all major Smart Home protocols, the Swidget Wi-Fi Control transforms the Swidget Outlet or Switch into a Wi-Fi smart device. Using the free Swidget App (available for Android and iOS), unlock your Swidget device to perform any number of tasks: Power On/Off your outlet Monitor your energy consumption Schedule devices to conserve energy Set multiple automatic notifications including when your power consumption is too high As all Swidget Inserts operate on the Class 2 certified interface, an electrician is not required for installation or removal. When connected to a 2.4GHz Wi-Fi network, the Temperature & Humidity Insert can be used to create sensor-based automations, where temperature and humidity conditions can trigger actions in switches, outlets, send notifications, and more. Sensor information can also be relayed to various control systems, including Alexa and Google Assistant*, for use in a variety of applications. Features Wi-Fi 2.4GHz Independent power monitoring on each circuit Works with Amazon Alexa, Google Assistant and IFTTT* Regular OTA upgrades to expand capabilities * 3rd party integrations are controlled and managed by external service providers. Swidget makes no warranty that these services will continue to exist or be supported over the full life of the product. Technical Information Wireless standard: Wi-Fi 802.11g Wireless band: 2.4GHz Device compatibility: Amazon Alexa, Google Assistant and IFTTT Device upgrades: OTA Environmental: Indoor installation only Operating temperature: -10 °C to 40 °C (14 °F to 104 °F) Additional specs: Temperature Range: -10 - 40 °C (+/- 1 °C {after calibration}) Relative Humidity Range: 0 -100% {+/- 5% RH) Document Brochure Data Sheet

Description Leviton Decora Rocker-Slide Universal Dimmers provide smooth, slide-action, full-range dimming for Incandescent, Magnetic Low Voltage, dimmable LEDs and dimmable CFL loads. They combine a Decora rocker switch with a contemporary full-range slender slide bar for precise lighting control. With a new, streamlined style, Decora dimmers complement any interior design and are compatible with other Decora devices. ***Wallplate sold separately*** Benefits New aesthetically pleasing design with rocker switch and slender dimmer control slide bar Integrated linear full-range slide control for easy, precise operation Controls a variety of dimmable LED and CFL lamps Compatible with Magnetic Low Voltage loads, Incandescent and Halogen lamps Additional color change kits available in Black, Brown, Red and Gray Slim, compact housing fits easily into a standard wallbox and is suitable for multi-gang installations with other Decora products The slide bar location preserves the selected brightness level when the dimmer is switched OFF Microprocessor control offers flexibility to program LEDs and CFLs for best performance Switch under the color change kit to turn locator light ON/OFF No fins for multi-gang installation Wired using leads, a Neutral wire is not required for operation Built-in radio/TV interference filter Technical Information Action: Rocker Switch for On/OFF, Slide Bar for Lighting Level Control Color: White Frequency: 60 Hz Light: Locator Light that can be turned off Load Rating: 1000w Incandescent, 100VA MLV, 450w LED and CFL Load Type: Incandescent, Dimmable LED, Dimmable CFL, Magnetic Low Voltage Preset: Slide bar preserves desired lighting level Protection: Radio/TV Filter Standards and Certifications: cCSAus, NOM Switch Type: Single-Pole & 3-way Type: Dimmer Voltage: 120Vac Wallplate: Sold Separately Warranty: 5-year Limited Document

Description This Leviton Slide-To-Off dimmer is simple to use and has a neat look to it. It is great for dimming LED, CFL and incandescent bulbs. You can set the mood in any rooms with this easy to use, precise dimmer. Just slide it up to turn on and brighten the lights and slide down to dim and turn them off. Comes in a convenient pack of 2! ***Wallplate not included*** Benefits Integrated linear full-range slide control for easy, precise operation Slim, compact housing fits easily into a standard wallbox and is suitable for multi-gang installations Future-proof to control a variety of dimmable CFL and LED lamps Backwards compatible with incandescent lamps Built-in radio/TV interference filter Technical Information Action: Slide-to-Off Color: White Load Rating: 600w Incandescent, 150w LED and CFL Load Type: Incandescent, Dimmable LED, Dimmable CFL Protection: Radio/TV Filter Standards and Certifications: UL/CSA Switch type: Single-Pole Type: Electro-Mechanical Voltage: 120vAC Wallplate: Sold Separately Warranty: 5-year Limited Documents Dimmer Cross Reference Guide Instruction Sheet

Description The Trimatron® rotary dimmer by Leviton allows you to turn your lights on/off with the push of a button and allows you to adjust your lighting to your preferred level with its easy to turn rotary button. This rotary dimmer is easy to install and compatible with LED,CFL, incandescent lighting and fan controls. Benefits Rotary control preserves desired lighting level 600W-120VAC Incandescent, 150W-120VAC LED/CFL, 60Hz, Single Pole and 3-Way (one-location & multi-location) cCSAus and NOM certified Easily fits in any device box, including shallow boxes Technical Information Type: Rotary Dimmer Style: Trimatron Switch Type: Single-Pole & 3-Way Action: Push for ON/OFF, Rotary control for lighting brightness Color: White Frequency: 60 Hz Load Rating: 600W Incandescent and Halogen, 150W LED and CFL Load Type: Incandescent, Halogen, Dimmable LED, Dimmable CFL Protection: Radio/TV Filter Voltage: 120 VAC

Description The GM40AV Time Switch is a universal, electromechanical time switch designed for general purpose residential and commercial applications. The robust 40 A time switch automatically detects the input voltage without the use of a DIP switch or selector pins. The time switch automatically selects any voltage between 120-277 VAC. The mechanism is mounted in a compact UL Type 3R outdoor enclosure and can also be easily retrofitted into other Intermatic enclosure types. The time switch features a DPDT switching configuration standard (i.e. two normally open and two normally closed contacts). Features Autovoltage selection 120 VAC-277 VAC Captive trippers - trippers cannot be lost 40 A rating Self-recharging battery backup, "Q" models feature 72-hour carry-over Power and status LED indicators 24-Hour or 7-day models available Up to 48 ON/OFF operations per 24-hour period or 42 ON/OFF operations per week on "W" models DPDT switching configuration standard (2 NO and 2 NC Contacts) Manual three-way ON/OFF/AUTO override switch Easy-to-read clock face Technical Information Minimum ON/OFF Times: 15 min Maximum ON/OFF Operations: 48 Operation Mode: 24 hour Mechanism Type: Electromechanical Has Captive Trippers: Yes Has Override Switch: Yes Has Real-time Clock Face: Yes Enclosure Type: Indoor/outdoor type 3R plastic Number of Trippers Included: 96 Product Dimensions (H x W x D) in: 8 7/8 x 6 39/64 x 3 in Wire Size Max: #8 AWG Load Ratings Magnetic Ballast (NO) Range(s): 30 A, 120 VAC; 20 A, 277 VAC Magnetic Ballast (NC) Range(s): 10 A, 277 VAC Resistive (NO) Range(s): 40 A, 120-277 VAC Resistive (NC) Range(s): 30 A, 120-277 VAC Pilot Duty (NO) Range(s): 300 VA, 120-240 VAC Pilot Duty Load Ratings Ranges: 300 VA, 120-240 VAC Motor Load Ratings NC Ranges: 1 HP, 12 FLA, 30 LRA @ 120 VAC; 2 HP, 10 FLA, 30 LRA @ 240 VAC Motor Load Ratings NO Ranges: 1 HP, 16 FLA, 90 LRA @120 VAC; 2 HP, 12 FLA, 52 LRA @ 208-277 VAC Voltage Selection Type: Auto Voltage Wiring Option: Screw box lug Input Voltage Range(s) Auto Voltage: 120-277 VAC, 60 Hz Switch Type: DPDT Electrical Life: 50,000 operations at full load Operating Humidity: 0-95% RH, Non-condensing Temperature (operation): -40 °F to 131 °F / (-40 °C to 55 °C) Country of Origin (Intermatic): MEXICO Warranty Period: 1-Year limited Document Technical Information Instruction Specification

escription This Leviton Indoor 24-Hour Programmable timer is very convenient. It will allow you to automate interior/exterior lights. You can program up to 49 on/off settings per day. It is also smart so it will adjust itself to local sunrise/sunset and daylight saving! It will help you reduce your energy consumption and extend bulb life. It comes in a very convenient package of 2. Benefits Timer settings at-a-glance with large, back-lit display Flexibility to program weekdays, weekends or any combination of days Astronomical clock automatically adjusts to local sunrise/sunset times Automatic daylight savings time adjustment option Single pole, 3-way or more when used with the VP0SR matching or coordinating remote switch Rechargeable battery keeps time during temporary power outages White with ivory and light almond faceplates included *Obtaining Longitude/Latitude Coordinates Find your longitude and latitude coordinates to enable the VPT24 to provide accurate local sunup/sundown times by clicking the link below and entering your home address. Use the first 2 digits (degrees) of the coordinates when programming the sunup/sundown feature. Ignore the (-) sign if one is shown in your coordinate results. Longitude/Latitude Coordinates Lookup Technical Information Color: White Feature: Single-Pole, 3 way or more applications Neutral: Required Pole: 3 Power consumption: < 1 watt Standards and certifications: UL/CSA Style Name: Decora Timer Type: 24 Hour LCD Programmable Type: Electronic Voltage: 120vAC Warranty: 5-year Limited Wire: 3 Documents Daylight Saving Time Application note Programming guide Spec Sheet

Description The Lutron Caseta In-Wall Smart Dimmer Switch PRO is UL listed to work with up to 250W of dimmable LED, or 1000W Incandescent/Halogen bulbs. The Caseta Dimmer Switch PRO is also compatible with LEDs with integrated drivers, magnetic low-voltage loads, as well as Phillips Mark 10® ballasts and Lutron Hi-Lume 1% 2-Wire (LTE) LED drivers. Neutral wire connection is optional for standard LED bulbs, but required for MLV loads, LED drivers, dimmable ballasts, and power modules. Minimum load with neutral connected is 10W, without neutral is 25W. Pair a Lutron Pico Remote Control (PJ2-3BRL-Gxx-L01) to the Caseta dimmer switch PRO and mount it anywhere to dim the lights from any location using the Pico wall box adapter (PICO-WBX-ADAPT); Pico Remote and wall box adapter sold separately. The Caseta Smart Dimmer PRO can be used in single pole and 3-way applications (when wired to existing 3-way switches). A Pico Remote control is required to create 4-way or multi-location applications. Use the Lutron Smart Hub to connect the Caseta Smart Dimmer Switch PRO to leading smart home devices - including Alexa, Apple Home, Google Home, Ring, Sonos, and more. The smart hub doesn't rely on Wi-Fi to control lights which avoids slowing down internet speeds and allows you to stay connected even when the Wi-Fi goes down. The hub also unlocks advance features like Smart Away which randomly turns lights on and off, to make it look like you're at home, even if you're away (Lutron Smart Hub, L-BDG2-WH required). Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately). Controls 250 W LED (screw-base), 1000 W incandescent/halogen, 1000 VA (800 W) magnetic low-voltage, 520 W Hi-lume 1 percent 2-wire LED driver, or 5 A Tu-Wire fluorescent ballast loads. Simple, intuitive design with on, off and raise/lower buttons. Provides true dimming from each location with Pico wireless remotes. Offers reliable dimming of dimmable LEDs/CFLs, as well as halogens and incandescents Includes: One (1) Lutron Caseta in-wall dimmer switch PRO; Gloss finish Features Includes: One (1) Lutron Caseta in-wall dimmer switch PRO; Gloss finish Works with up to 250W of dimmable LED or 1000W of MLV/Incandescent/Halogen; 120V Neutral Optional for LED, CFL, and Incandescent/Halogen; Neutral Required for ELV, MLV, dimmable ballasts, and Hi-Lume 1% LED drivers, and Lutron power boosters Dim from up to 10 locations by pairing the dimmer to a mountable Lutron Pico remote (PJ2-WALL-WH-L01 sold separately); Can be wired to existing 3-way switches (CA-3PS-XX) Add a Lutron Smart Hub to connect with Alexa, Apple Home, the Google Assistant, Ring, Serena Shades, SONOS, and more Lutron Clear Connect does not rely on wi-fi and is ultra-fast and ultra-reliable (avoid repeat service calls); 60ft direct line-of-sight or 30ft through walls of a Lutron Smart Hub Pair up to ten (10) Lutron Pico Remotes or Caseta motion sensors to one (1) Lutron Caseta dimmer switch (limitations reflect when no Lutron Smart Hub installed) Control at the wall, with a Pico smart remote, with a phone, or voice assistant (Lutron Smart Hub, L-BDG2-WH required for phone and voice assistant control) Technical Information Includes: One (1) Lutron Caseta in-wall dimmer switch PRO; Gloss finish Document Spec Sheet Brochure Installation Manual

Description Lutron Nova T Single-Pole Dimmer - 8A Max - 0-10VDC - White Features Available for 120-277V line voltage switching (sink- only control) 0 - 10 V- LED drivers and ballasts (power pack not required for loads up to 8 A) Excellent for residential or commercial applications Intuitive operation; easy to use Slide-to-off and preset models available Enclosed heat sink for aesthetically pleasing appearance Multi-gang alignment for quick and easy installation Full family of products for most lighting sources, plus matching accessories and wallplates Rated at 120V, 60Hz, unless noted otherwise Document Installation Manual Spec Sheet

Description Lutron Smart Bridge PRO with HomeKit technology, third party integration and control of lights and shades via the Lutron app or Siri, for Canada Supports up to 50 wireless devices. Connects to Wi-fi router via Ethernet. Supports Siri and HomeKit technology, and Serena, Sivoia QS wireless shades. Allows integration with select A/V and security systems. Document Spec Sheet Installation Manual

Description Replacement Tripper package for T100 Series, T7000 series and WH40 timer products, 2 on trippers and 2 off trippers.

Description This timer requires no programming; preset countdown times are activated by pressing a single button. Silent operation makes this timer ideal for applications where the noise of mechanical countdown timers is of concern. *NOTE: Not for use with sunlamps, saunas, or loads that could cause personal injury if timed incorrectly. ***Wallplate not included*** Features No programming required Provides silent operation in time ranges from five minutes to 30 minutes Single-button time selection, with some models having a HOLD mode, for continuous ON operation Replaces single-pole switches in a variety of applications Incandescent/fluorescent/CFL/LED compatible For use with decorator-style wall plate (not included) Requires neutral connection Technical Information Color: White Input Voltage Range(s): 120 VAC, 60 Hz Mechanism Type: Digital/Electrical Operation Mode: Countdown Wiring Configurations: Single Hold Mode Included: Yes Wall Plate Configurations: Single-Gang Countdown Time: 30 min Neutral Connection Required: Yes Time Presets: 5 min, 10 min, 15 min, 30 min Warranty Period: 1-Year limited Application Compatibilities: CFL, Fluorescent, Incandescent, LED Ballast Fluorescent:8 A, 1000 VA Electronic Ballast LED: 4 A, 500 VA Motor Three Phase Ranges: 1/4 HP Resistive Heater:15 A, 1800 W Tungsten (Incandescent) Range(s): 1000 W Operating Temperature Max (°C): 40 Operating Temperature Max (°F): 104 Operating Temperature Min (°C): 0 Operating Temperature Min (°F): 32 Product Depth (in): 1.438 Product Depth (mm): 36.5 Product Height (in): 4.125 Product Height (mm): 104.8 Product Width (in): 1.688 Product Width (mm): 42.93 CAProp65Message: Please see the Warning @ www.P65Warnings.ca.gov Country Of Origin: China RoHS Certification: Yes Document Technical Data Instruction

Description The Swidget product line has been developed to support the easy integration of Home Automation and Smart Home markets with unique and flexible solutions. Interchangeable Swidget Inserts can be installed, removed or replaced - making Swidget the optimal choice for building renovations and new construction. Adding a Swidget Insert turns the wired device into a powerful and flexible Smart Home device. The interchangeability of the Swidget Inserts ensure that the system can work with any existing or future Smart Home wireless system. Designed to be integrated into all major Smart Home protocols, the Swidget Wi-Fi Control transforms the Swidget Outlet or Switch into a Wi-Fi smart device. Using the free Swidget App (available for Android and iOS), unlock your Swidget device to perform any numberof tasks: Power On/Off your outlet Monitor your energy consumption Schedule devices to conserve energy Set multiple automatic notifications including when your power consumption is too high As all Swidget Inserts operate on the Class 2 certified interface, an electrician is not required for installation or removal. Features Wi-Fi 2.4GHz Independent power monitoring on each circuit Works with Amazon Alexa, Google Assistant and IFTTT* Regular OTA upgrades to expand capabilities * 3rd party integrations are controlled and managed by external service providers. Swidget makes no warranty that these services will continue to exist or be supported over the full life of the product. Technical Information Wireless standard: Wi-Fi 802.11g Wireless band: 2.4GHz Device compatibility: Amazon Alexa, Google Assistant and IFTTT Device upgrades: OTA Environmental: Indoor installation only Operating temperature: -10 °C to 40 °C (14 °F to 104 °F) Additional specs: Average Power Rating: 5VDC @ 40mA (Class 2) Document Brochure Data Sheet

Description The OnCloud Smart Wi-Fi 3-Way Switch works with any 120V bulb or fixture - every time. Works in 3-way or 4-way applications Features Durable polycarbonate body with snap-on faceplate The smart Wi-Fi 3-way switch povides a maximum output of 1200W Certified IEEE 802.11 b/g Wi-Fi 2.4Ghz radio Installs into 3-way or 4-way switch applications (only one smart Wi-Fi switch can be installed in any 3-way application NEUTRAL WIRE REQUIRED The switch can be controlled via WiZ App (Works with iOS and Android from anywhere. Voice control can also be achieved by integrating the app with most smart speakers. Works with Google Assistant, Siri, Alexa and IFTTT Operating temperature from -5°C to 45°C (23°F to 113°F) Suitable for indoor dry location use only Technical Information Approved Location: Dry / Indoor Input Voltage: 120 Vac - 60 Hz Certification: cETLus Output Current: Incandescent load: 10A; LED/CFL load: 5A Power Consumption: OFF: 0.80W; ON: 1.28W Rated Power: 1200W Wireless Frequency: 2.4GHz Wireless Standard: IEEE 802.11 b/g Warranty: 3-Year Document Specification Sheet Installation Instruction OnCloud Brochure

Description Decora Smart Wi-Fi® 2nd Generation devices connect to a Wi-Fi network and the My Leviton app to provide wireless lighting control for the whole home. Leviton’s Wi-Fi 2nd Generation Dimmer makes it easier than ever to add smart lighting control possibilities to any room or home. Use your voice with Hey Google, Amazon Alexa™ or Apple Siri® to dim and brighten connected lighting. Use the My Leviton app on a smartphone, tablet or computer to control lighting or adjust schedules. Decora Smart dimmers feature full-range dimming performance and custom settings for preset light levels, fade rates, and bulb types. Features NO HUB: dim and brighten lights from anywhere - simply replace your switch for full-range dimming with custom settings for preset light levels, fade rates, and bulb types USE YOUR VOICE: works with Hey Google, Amazon Alexa or Apple Siri to turn connected bulbs and fixtures on or off WORKS WITH HOMEKIT: Control with the Apple Home app and Siri from your iPhone, iPad, Apple Watch, Mac, or HomePod. EASY TO INSTALL: 2.4 GHz, wire leads, reduced depth, and streamlined app flow; Neutral wire required; works with LED, magnetic ballast, CFL, electronic ballast, incandescent, halogen, and motor loads. MY LEVITON APP: schedule lights to turn on when you want including sunrise/sunset, easily create lighting scenes with multiple devices, and control from anywhere Technical Information Voltage: 120V AC Hz: 50/60 Hz LED / CFL: 300 Watts Incandescent: 600 Watts Magnetic Low Voltage: 600VA Operating Temp: 0°C - 40°C (32°F - 104°F) Operating Humidity: 0 - 90% non-condensing Wi-Fi: 802.11 b/g/n networks - 2.4 GHz Only Security: WPA, WPA2 or WPA3 security, or open Bluetooth: v5.0 iOS: Version 12.0 or later Android: Version 8.0 or later Document Instruction Brochure