All Items on Orka.ca

Description The Klein Tools 8.5-Inch Impact Rated Pass Through Socket Set features a pass-through head for driving hex nuts on extended threaded rod. 3/8-Inch square drive adapter allows for use with traditional sockets and includes 11 impact rated sockets. Designed with a steel handle that provides comfort in high torque applications. Features Klein KNECT™ (M) Pass Through Socket Set with 11 sockets, extension, impact adapter, 3/8-Inch square adapter, and handle Pass through head for driving hex nuts on extended threaded rod Impact rated sockets for the toughest driving applications 1/4-Inch Socket doubles as a standard 1/4-Inch bit holder 3/8-Inch Square adapter allows for use with traditional sockets Hex sizes include: 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4-Inch Stacks with other MODbox™ cases and connects on the MODbox™ Case Adapter Side Rail Attachment for easily accessibility (Cat. No. 54875MB) Technical Information Type: Impact Sockets, Pass Through Socket Wrench Application: Fasteners; Impact Driver Special Features: Pass Through Head for Driving Hex Nuts Overall Length: 8.75'' (22.2 cm) Overall Height: 1.8'' (4.6 cm) Overall Width: 3.7'' (9.4 cm) Material: Chrome-Moly, Chrome-Vanadium Drive Size: 3/8'' Socket Size: 1/4'', 9/32'', 5/16'', 11/32'', 3/8'', 7/16'', 1/2'', 9/16'', 5/8'', 11/16'', 3/4'' Number of Points: 6 Number of Pieces: 15 Included: Socket Wrench Set: (11) Sockets, Extension, Impact Adapter, 3/8-Inch Square Adapter, Handle and MODbox™ Case Weight: 2.22 lb (1.01 kg) UPC: 092644654008

Description Arlington non-metallic Low Voltage Mounting Bracket helps you save time and cost when installing low- voltage Class 2 communications, cable tv, and computer wiring. Designed for use with 1/4" or 1" drywall installed on furring strips attached to concrete walls. Benefits Horizontal and vertical mounting options Bracket can be traced for cut out Cheaper than metal brackets Oval hole allows final shifting, straightening of device Brackets can be adjusted to fit various wallboard thickness cUL/ CSA listed Installation on existing construction for class 2 wiring only Technical Information Part #: LV1 Weight: 0.048lbs/each Height: 4.250" Width: 2.500" Colour: Black Material: Plastic Documents Specification Sheet LV1 Line Drawing

Description The LUNA 4" fixture, is a 12 watt, recessed light fixture for retrofit, remodel or new construction applications with 360-degree rotation and 30-degree tilt. It is a high-performance, easy to install residential grade downlight solution that offers good light output, energy-efficiency and streamlined design. Suitable for wet locations. Also available in a 4-pack with an OnCloud dimmer for Wi-Fi control through the WiZ app to create scenes, set schedules and connect with smart speakers. Features Durable airtight aluminum body with adjustable regressed gimbal. Includes anodized blue heat sink to provide maximum airflow for the LED light source General application light fixture featuring a 12 watt LED module that maintains uniform intensity producing up to 780 lumens, with a typical CRI of 90 On fixture selectable switch allows switching between 2700k, 3000k, 3500k, 4000k and 5000k color temperature 100%-10% dimming capability. This fixture is compatible with industry standard forward-phase / reverse-phase and TRIAC/ELV dimmers Fixture lens provides 38° beam spread Includes two spring loaded clips to attached to any ceiling material Extruded aluminum hardwire box with 300mA dimmable class II electronic LED driver with 100-135V AC input. Includes an 18" FT6 rated cable with DC 2.1 connector between driver and fixture approved for use in plenums and suspended ceilings Three "quick connect" push-in terminals for fast and easy wiring Operating Temperature from -20°C to 40°C (-4°F to 104°F) Suitable for wet locations Approved for direct contact with insulation Technical Information Application: Ceiling Recess Mount Approved Location: Wet / Insulated Ceilings Beam Angle: 38° CCT (color selectable): 2700 K / 3000 K / 3500 K / 4000 K / 5000 K Certification: cETLus Class II: Yes Colour: White CRI: 90 Dimming: Yes Dimming Tech: Forward/reverse-phase - TRIAC/ELV Energy Star: Yes Hole Cut: Ø 4¼ " (108mm) Input: 100-135V AC, 60Hz Lumens: Up to 850 Lumens per Watt: Up to 71 Power Factor: 0.9 Projected Life: 70% @ 50,000 hrs Warranty: Lifetime Wattage: 12W Document Brochure Specification Sheet Installation Compatible Dimmers

Description This Stelpro built-in electronic thermostat for Brava and Prima electric baseboards has th ree buttons that make it possible to quickly raise and lower the temperature or set it to 20°C in a single click. Easy to install with its t hree-wire connection in the same junction box as the power supply. Compatible with Brava and Prima baseboards Features Energy savings Unmatched precision Sleek, discreet design Quick and easy to install and use Frost protection (min. 5°C) Technical Information Colour: :White Finition: Molded plastic Wattage and Voltage: From 300 to 2500 W @ 120/208/240/277/347 V Construction: Membrane with three sturdy buttons and two indicator lights that light up when the setpoint is changed Temperature Range: 5 to 30°C (41 to 86°F) Accuracy: Accurate to +/- 0.5°C (+/- 1°F) Certified C828-13 (model SIBTE12C) Temperature sensing with thermistor WARRANTY: 3 years Documents Specification Sheet Installation guide

Description Klein Tools’ All-in-1 Precision Screwdriver Set with compact carrying case features 39 precision bits. This set provides everything you need to work with electronics and precision fasteners including those for Apple® products such as Apple® iPhone, MacBook, and Watch. The reversible barrel is standard on one side and extra-long on the other for those hard-to-reach jobs. Powerful magnets housed in the barrel better secure the bit, which also allows it to easily pick-up and retain fasteners. The Cushion-Grip handle and spin cap provide outstanding comfort and control. Benefits Precision screwdriver set includes 39 bits for various applications including repair of most Apple® products Powerful magnets inside barrel to better retain bits, as well as pick-up and hold fasteners Reversible barrel has standard and extended-reach ends Compact carrying case features a stay-shut latch and extra-long bits for easier access Spin cap offers optimum and precise control Industrial-strength heat treated bits Cushion-Grip handles for maximum comfort Apple® is registered trademarks of Apple Inc; TORX® is a registered trademark of Acument Intellectual Properties, LLC Technical Information Application: Precision Electronics Special Features: 39 Different Precision Bits Including Bits for Apple® Products, Magnetic Phillips Bits: #000, #00, #0, #1, #2 Slotted Bits: 1 mm, 1.5 mm, 2 mm, 2.5 mm, 3 mm, 3.5 mm Square Bits: #1, #2 Hex Bits: 0.9 mm, 1.3 mm, 1.5 mm, Tamperproof: 2 mm, 2.5 mm, 3 mm, 3.5 mm TORX® Bits: T3, T4, Tamperproof: T5, T6, T7, T8, T9, T10, T15 Other Bits: Triangle: #2, #3; Pentalope: P2, P5; Triwing: Y000, Y0, Y1; Stand-Off; Spanner: #4, #6 Magnetic: Yes Shank Length: Standard: 2'' (5.1 cm); Extended: 4'' (10.2 cm) Material: Steel Bits Insulated: No Handle Type: Cushion-Grip with Spin Cap Handle Material: Acetate Handle Color: Black/Yellow Handle Length: 6.1'' (15.4 cm) Overall Length: 6.35'' (16.1 cm) Overall Height: 1.57'' (4.0 cm) Overall Width: 3.19'' (8.1 cm) Number of Pieces: 40 Type: Screwdriver Set Weight: 10 oz (284 g) Documents Brochure

Description The Tradesman Pro Magnetic Wristband features rare earth magnets powerful enough to keep your wire nuts, screws, bits, nails, and other small parts nearby. No more losing small parts or going back to your tool bag for more. This premium wristband is made with 1680d ballistic material and is tough enough to stand up to use, yet comfortable enough to stay close to your skin with a breathable mesh interior. The magnetic wristband is contoured with an adjustable closure to fit most wrist sizes comfortably. It will also fit around a belt or tool bag to always keep your small parts handy. Benefits Strong rare earth magnets keep small parts close at hand Breathable mesh interior for comfort Made of durable 1680d ballistic material Fits most wrist sizes Secure adjustable hook and loop closure Contoured for a comfortable fit around the wrist Wrap around your wrist, belt, or tool bag and keep small parts easily within reach Technical Information Sub Brand: Tradesman Pro Type: Magnetic Wristband Material: 1680d Ballistic Weave, Mesh Interior Magnet Type: Rare Earth Overall Length: 13.25'' (33.7 cm) Overall Width: 0.75'' (1.9 cm) Overall Height: 4'' (10.2 cm) Color: Black with Orange & Gray Weight: 4 oz (113.4 g) Documents Tradesman Pro Wristband Brochure

Description The Klein Tools Hard Hat Replacement Suspension works with Klein's KARBN™ full brim hard hats (Model 60345 , 60346 and 60347 ). Easily attaches in 4-Points inside the hard hat shell, featuring a flexible open-frame design for maximum air flow. Ratchet-knob and pivot adjustment help to position securely on the neck. Also available: premium replacement cooling sweatband and premium replacement top pad (sold separately) . Features Hard Hat Suspension features flexible open frame design that easily conforms to your head, allowing maximum ventilation Ratchet-knob adjustment; easy one-hand adjustment, even with work gloves on Suspension pivot allows ratchet adjustment to be positioned on the neck for a secure fit 4-Point suspension; multi-level height adjustment Adjustment size: Hat sizes 6.5 to 8 (52 to 64 cm) Fits all Klein Tools cap and full brim style hard hats Note: Replacement suspension does NOT come with sweatband (Cat. No. KHHSWTBND2 ) or top pad (Cat. No. KHHTOPPAD2 ). Those must be purchased separately. Technical Information Type: Replacement Suspension for Klein Tools KARBN™ Hard Hat Application: 6.5 to 8 Special Features: Pivoting, 4-Point, Ratchet Adjustment Overall Length: 8'' (20.3 cm) Overall Height: 4'' (10.2 cm) Overall Width: 8'' (20.3 cm) Material: Nylon Weight: 4.2 oz (118 g) UPC: 092644604386 Document Brochure

Description Meet the most discreet convector on the market! The Mirage convector heats any room with high precision, whether in a home or a business. A true chameleon, its modern and exclusive design allows it to blend elegantly into your decor. Benefits Ideal for the kitchen, living room, basement, bedroom and office space Sturdy one-piece front panel Completely quiet Surface-mounted only Wall mounted at least 4 in. from the floor Concealed mounting bracket (included) Back entry plate with cable clamps (included) Built-in electronic thermostat with LCD screen Automatic temperature lowering at night (Automatic mode) Maximum temperature setpoint lock option (Security mode) Five year warranty *three years on electronic components Technical Information Color: White Wattage: 1500W Voltage: 120V (Plug-in) Height: 457mm (18 in) Length: 749mm (29-1/2 in) Weight: 8 kg (17.75 lbs) Control: Built-in Electronic thermostat Finish: Epoxy-Polyester Powder coat Element: Two stainless steel tubular sheathed elements insulated with nylon sleeves Mounting: Surface mount only, at least 4 in from the floor. Document Specification Sheet User's manual

Description Specially designed for fan heaters, the ST402NPFF delivers the utmost comfort thanks to the advanced features such as boost and lobby modes. Bringing together harmonious design, superior technology and safety, they offer comfort with complete simplicity. ***4 wires are required for the installation Benefit Energy savings up to 12% ECO mode, one-click temperature setback Compatible with forced-air units Heat ''boost'' feature, rapide temperature rise (with a timer) Lobby mode, compensates for fast temperature drops Safe design, sealed housing S3 mounting plate. Sturdy, simple and safe installation Display in Celsius or Fahrenheit Compatible with the Spider Ceiling Fan Heater Also available in 2500w Technical Information Model: ST402NPFF Color: White Finish: Molded plastic Temperature range: 5 °C to 30 °c Minimum Load Wattage: 150W at 120V, 260W at 208V, 300W at 240V Maximum load Wattage: 2000W at 120VAC, 3475W at 208VAC, 4000W at 240VAC Voltage: 240V/ 208V/ 120V Amperage: 10.4 Frequency: 60hz Document Specification sheet User Guide

Description The 9-in-1 Impact-Rated Flip Socket Set provides 8 Hex nut driver sizes and a 1/4-Inch bit holding feature in one tool. The versatility provided allows for convenient swapping between common nut driving sizes and quickly attaches to an impact driver or our 1/4-Inch quick-connect handles (handles not included). Every component is impact rated, making it an essential tool for the toughest driving applications. Features Impact-Rated Flip Socket Set includes 4 flip sockets and a 1/4-Inch bit holding feature for quick access and convenience to common sizes 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, and 3/4-Inch hex sizes Rare-Earth magnet to retain hex fasteners for convenient and easy driving Flip sockets can be stored in any order or orientation on the shaft Color coded hex sizes for easy identification Shaft and sockets are impact-rated and designed for heavy-duty applications Klein quick-connect handle easily connects to shaft for convenience on the jobsite (handle not included) Technical Information Type: Flip Socket Application: Fastening; Impact Driving Special Features: 1/4'' Bit Holding; Multi-Bit Nut Driver; Impact Rated; Flip Socket; Rare Earth Magnet Overall Length: 1.02'' (2.6 cm) Overall Height: 6.7'' (17 cm) Overall Width: 1.02'' (2.59 cm) Material: Steel Alloy Drive Size: 1/4'' Socket Size: 1/4'', 5/16'', 3/8'', 7/16'', 1/2'', 9/16'', 5/8'', 3/4'' Hex Number of Points: 6 Weight: 7.36 oz (209 g) UPC: 092644329340 Document Brochure

Description Klein Tools’ Rechargeable Light Array Headlamp with its unique LED pattern offers a more usable light field. You’ll know when it’s time to recharge the lamp, because the LED lights on the battery gauge clearly indicate how much battery you have left. Easily remove headlamp from the strap bracket and mount it directly to a Klein Hard Hat, or mount with the backside magnet to use as a work light. The adjustable, comfort fabric strap comes with a handy holder for your marker and carpenter’s pencil. Benefits Rechargeable headlamp with a rectangular light array offers more usable light field LED Light's adjustable fabric strap with silicone grip comes equipped with a convenient marker and carpenter's pencil holder Mounts magnetically with a strong backside magnet for use as a work light Smartly designed headlamp bracket also attaches directly to Klein® Hard Hats (equipped with bracket system) Battery gauge indicates level of battery life with colored LED lights Slimmer profile light with pivoting mount allows up to a 64-Degree lighting angle Bright all-day light: 260 lumens for 9 hours and 125 for a long 14 hours Light can be easily removed from bracket for recharging via USB-C cable (included) Durable headlamp: drop-test rating of 6-Feet, dust and water-resistant Technical Information Type: Headlamp with Rechargeable Internal Battery Application: Head Light; Work Light Headlamp Special Features: Light Array, Magnet, Battery Gauge; Fabric Strap with Pencil/Marker Holder Overall Length: 2.60'' (6.6 cm) Overall Height: 2.08'' (5.3 cm) Overall Width: 1.28'' (3.3 cm) Material: ABS Lumens: High: 260; Low: 125 Bulb Type: LED Battery Life: High: 9 Hours; Low: 14 Hours Batteries: Lithium-ion Temperature Range: Operating/Charging: 32° to 113°F (0° to 45°C); Storage: 14° to 131°F (-10° to 55°C) Drop Protection: 6' (1.8 m) Standard: BC, CE, NR Can, REACH, RoHS Included: Lamp, Bracket, Fabric Strap, Pencil/Marker holder, USB Charging Cord; Instruction Manual Weight: 0.4 lb (0.2) kg Documents Brochure Instruction Manual

Description ***Thermostat must be installed by an electrician and wired prior to wiring your wall fan heater. This Stelpro built-in thermostat is specifically designed for UHF series wall fan heaters. Each adjustable kit comes complete with thermostat, white control knob, and installation instructions. Benefits 120V- 347V For UHF series wall fan heater Includes: (1) Thermostat, (1) knob, (1) cap, (2) screws

Description Leviton 2 Gang Decora/ GFCI device Wallplates offer a simple clean aesthetic look; with rounded edges and a smooth finish making it dust resistant. These wall plates easily blend in with any decor, are easy to install and economically priced. Benefits Unbreakable Nylon 1-Gang Decora/GFCI Device Wallplate Standard Size Thermoset Wall plate screws included Device Mount

Description Experience the ultimate convenience in lighting control with Lutron's family of Caseta Wireless dimmers, switches, and smartphone control. The Caseta Wireless In-Wall Switch provides switching of multiple load types and, when paired with Pico remote control, your light can be controlled from anywhere in the space. Use the Pico remote control either in your hand, on a tabletop pedestal or by mounting the remote directly to the wall (remote control and accessories sold separately). You can even use the Pico remote to control the lights from your car as you arrive home. Benefits Controls wall and Ceiling lights doesn't require a Neutral wire minimum load cap included (for switching LED, CFL, and ELV loads), Claro wall plate (pictured) sold separately. Use Pico remotes for additional switches in multi-location applications Tested to withstand surge voltages without damage or loss of operation controls always operate locally and DO not require system control For use with the Caseta wireless smart bridge Pro tested to withstand electrostatic discharge without damage or memory loss Lutron PD-5WS-DV-WH Light Switch, Caseta Wireless 5A Lighting and 3A Fan RF On/Off - White Technical Information Specifications: cULus Listed NOM Certified FCC Approved Complies with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules Industry Canada Certified IFTEL Certified NEMA 410 Power Operating voltage: 120/277 V~ 50/60 Hz Maximum Load at 120V: Incandescent / Halogen - 600W MLV - 600 VA/475 W General Purpose Fan - 3A LED - 5A Fluorescent - 5A ELV - 600W Environment Ambient operating temperature: 32 °F to 104 °F (0 °C to 40 °C), 0%to 90% humidity, noncondensing. Indoor use only Documents Limited Warranty Specification Sheet Installation guide 3-way with regular switch

Description The Klein Tools Digital Angle Gauge and Level can measure or set angles, check relative angles, or can be used as a digital level. The strong magnetic base attaches to ferromagnetic surfaces such as conduit. Along with dual measurement ranges of 0 to 90-Degree and 0 to 180-Degree, this tool has a high visibility reverse contrast display for easy viewing. Benefits This Digital Angle Gauge and Level can measure or set angles, check relative angles, or can be used as a digital level High visibility reverse contrast display improves visibility in dimly lit work environments Strong magnetic base to attaches to conduit, pipes, saw blades, vents, ducts, and other ferromagnetic surfaces V-groove edges enable optimal alignment on conduits and pipes for bending and alignment 0 to 90-Degree and 0 to 180-Degree measurement ranges facilitate multiple and diverse applications 0 to 180-Degree range is useful when accounting for kickback in pipe bending applications when bending to 90-Degree or more Display auto-rotates when upside-down for easy viewing Water and dust resistant with rating of IP42 Soft carrying case and two AAA batteries included Technical Information Type: Digital Level Application: Measure or Set Angles, Check Relative Angles, or Use as a Digital Level Special Features: V-grooves Around Entire Perimeter, Dual Measurement Ranges at 0° to 90° and 0° to 180°, Reverse Contrast Material: ABS Plastic Housing and Electronic Components Magnet Type: Permanent Rare Earth Accuracy: ±0.1° from 0° to 1°, 89° to 91°, 179° to 180°; ±0.2° at All Other Angles Drop Protection: 6.6' (2 m) Ingress Protection: IP42: Water and Dust Resistant Low Battery Indicator: Yes Batteries: 2 x 1.5 AAA Included: Soft Carrying Case, Instruction Manual, Batteries Document Brochure Instructions

Description Arlington’s non-conductive box extenders, extend set back metal or non-metallic electrical boxes up to 1-1/2 inches, the easy way. They work with most 3 1/2'' and 4'' octagonal boxes, providing a level, fully supported wiring device that’s flush with the wall surface. ***Screws are not included, you will need mechanical screws 6-32 long enough for your application *** Benefits Complies with 2017 NEC Article 314.20 Extends box up to 1-1/2” to bring it level with ceiling surface Trims to accommodate shallow boxes or to avoid obstructions Manufactured from 105°C continuous use 94V0 rated flame retardant plastic for safer installations Technical Information Model: BE-1R Height: 4.850'' Width: 4.350'' Colour: White Material: Plastic Documents Brochure Catalogue page Line Drawing

Description Klein Tools' Electrician's Pocket Knife is as valuable for splitting cable and stripping wire as it is for performing everyday tasks on the job site. This compact knife offers an easy one-handed, bearing-assisted opening. The superior stainless-steel blade offers great edge retention along with convenient stripping notches and a wire looping hole. The rugged, everyday knife also sports a low-carry pocket clip keeping it safely in your pocket. Benefits Electrician's pocket knife offers easy one-handed, bearing-assisted opening of the blade Superior stainless steel for better edge retention on the drop point blade Wire stripping notches on the blade strips 14-10 AWG solid, 16-12 AWG stranded wire when the blade is closed Hole at the base of the blade is convenient for looping electrical wire Rugged aluminum handle and a frame lock secures the blade in open position Compact, low-carry pocket clip and a lanyard hole for tethering Ambidextrous flip lever for easy one finger opening Technical Information Type: Pocket Knife Application: All-Purpose Special Features: Bearing-Assist Open; Wire Stripping Notches 10-14 AWG Solid/12-16 AWG Stranded, Wire Loop Hole Lock Style: Frame Blade Type: Drop Point Blade Length: 2.95'' (6.4 cm) Material: Aluminum Blade Material: Stainless Steel Retractable Blade: No Blade Thickness: 0.11'' (0.3 cm) Handle Type: Aluminum Handle Color: Black Handle Material: Aluminum Length Closed: 4.23'' (10.7 cm) Sharpenable: Yes Overall Length: 7.18'' (18.2 cm) Overall Height: 1.45'' (3.7 cm) Overall Width: 0.62'' (1.6 cm) Standard: REACH Weight: 3.6 oz (102 g) Documents Brochure

Description The Klein Tools 2-Piece Stainless Steel BBQ Tool Set offers a great grilling aid, ideal for flipping burgers, hot dogs or other grilling favorites. Rust-resistant steel and cushion-grip handles make this a set to last. Benefits Flip your food with the perfect BBQ accessory The stainless steel construction provides rust resistance Cushion-Grip handle resists slippage and provides the comfort needed for frequent use The 17-Inch (432 mm) length makes it ideal for flipping your burgers or hot dogs A Tip-Ident® on the end of the handles allows for quick identification in crowded drawers Documents Brochure

Description Klein Tools MODbox™ Tool Carrier Rail Attachment connects to side rails to keep tools accessible on the worksite. The slim storage compartment is made with a fixed center divider and comes with removable dividers for added modularity. Steel rail is convenient for mounting magnetic tools or hanging tools with belt clips. Easily connects to the rail system on MODbox™ components to make a custom mobile workstation. Features MODbox™ components easily interconnect for a customized mobile workstation Easily attach and move the Tool Carrier onto any system side rail with one-handed release for added convenience Keep commonly used tools accessible and upright with separate compartments Slots behind steel rail keep the overall profile slim and are optimized for commonly used drivers for additional storage Convenient steel rail for mounting tools with belt clips or magnetic mounts Create 2, 3, or 4 separate compartments with two removable dividers for added modularity Secure the tool carrier inside the rolling toolbox and medium toolbox with the internal rail accessory (Cat. No. 54818MB), sold separately Technical Information Type: MODbox™ Rail Attachment Application: MODbox™ Tool Carrier Rail Attachment Special Features: Rivets Secure Metal Bar; Slots Behind Metal Bar Are Sized For Commonly Used Drivers; Removable Dividers Overall Length: 8.1'' (20.6 cm) Overall Height: 5'' (12.7 cm) Overall Width: 3.8'' (9.7 cm) Material: Hard Plastic and Metal Color: Dark Gray Number of Compartments: 1, 2, or 3; Dependent on Divider Use Compartment Sizes: Dependent on Divider Use Closure Type: Lid Snaps Shut Stackable: No Weight: 1.2 lb (0.5 kg) Documents Brochure

Description The NCVT5KIT includes a dual-range non-contact voltage tester with laser pointer and a GFCI receptacle tester. The NCVT-5A automatically detects and indicates voltage (12 - 1000V) allowing broad application. The RT210 will troubleshoot the most common wiring problems in standard and GFCI receptacles. Benefits NCVT-5A provides non-contact determination of AC voltage in cables, cords, circuit breakers, switches, outlets and wires, as well as AC voltage in security, entertainment, communications, environmental control and irrigation systems Dual-range testing: select 12 to 1000V AC which is perfect for low voltage systems such as doorbells, environmental control or irrigation systems, or select 70 to 1000V AC which is perfect for detecting systems such as electrical mains supply NCVT-5A delivers simultaneous visual and audible voltage indicators when AC voltage is detected Audible voltage indicator beeps at a greater frequency the higher the voltage that is sensed, or the closer to the voltage source it is Bright integrated laser pointer for identifying objects of interest at distance on the jobsite RT210 detects the most common wiring problems in standard and GFCI receptacles Works on GFCI outlets and confirms operation of the ground fault protective device Conditions the RT210 indicates: open ground, reverse polarity, open hot, open neutral, hot/ground reversed Technical Information Type: Non-Contact AC Voltage Tester, GFCI Receptacle Tester Application: Dual-Range Non-contact Detection of the Presence of AC Voltage from 12-1000 VAC or from 70-1000V AC Special Features: Integrated High Strength Red Laser Pointer, Dual Range Tester (70-1000V; 12V-1000V) AC Voltage Detection, Simultaneous Visual and Audible Voltage Indicators in the Presence of AC Voltage; US Patent No. D750985 Material: Plastic and Electronic Assemblies Drop Protection: 9.8' (3 m) Voltage: 12 to 1000 VAC Frequency: 50 to 500 Hz Pollution Degree: 2 Standard: CAT IV 1000V; Laser: Class 3a, 630-670nm, Max Power <5mW Included: NCVT-5A with Batteries, RT210 Batteries: 2 x AAA Battery Life: Laser On: 31 Hrs; NCV On with Visual and Audible Alerts: 25 Hrs Overall Length: 6'' (15.2 cm) Overall Height: 0.96'' (2.4 cm) Overall Width: 1.16'' (2.9 cm) Weight: 1.5 oz (43 g) Documents Non-Contact AC Voltage Tester Brochure Non-Contact AC Voltage Tester Instruction Manual GFCI Receptacle Tester Specification sheet

Description The Rack-A-Tiers multi-purpose wire dispenser is versatile, waterproof, rustproof, rugged, very reliable, lightweight & strong. It can dispense any wire that you need. It fits wire reels up to 34 inches (0.9 m) and 330 pounds (150 kgs). This dispenser is used to dispense one large and heavy reel or several reels of differently sized wires on a single dispenser. The handles allow you to easily move your wire around. Lock it together to make a comfortable seat, or use it as a sawhorse, pipe vise, caddy, workbench and more. ***Bars not included. You can use EMT pipes Benefits Works with spools up to 34″ in diameter Maximum Wire reel load 330 lbs Interlocking Pairs Easy to set-up V ersatile, waterproof, rustproof, rugged, and very reliable Technical Information Brand: Rack-A-Tiers Material: High-density polyethylene structural foam Dimension: 17" H x 17" L x 9" W Part#: 11455

Description Klein Tools Hard Hats were designed and engineered for optimal safety, comfort and fit. Unique features allow the user to comfortably work in a wide variety of applications and demanding environments. Patent-pending accessory mounts on front and back ensure Klein Headlamps attach securely — no straps needed! Benefits Safety hard hat has patent-pending accessory mounts on front and back ensure Klein Headlamps attach securely and precisely, every time — no straps or zip ties needed! Breathable, padded sweat-wicking sweatband and top pad improve comfort and are machine washable Unique suspension system features a flexible open frame design to provide optimal fit and improved air circulation Easy, one-handed adjustment with large knob ratchet mechanism (even with gloves on), and soft neck pad pivots to clear bandana knots and pony tails This Class E, Type 1 hard hat is tested up to 20kV and meets ANSI Z89.1-2014, CSA Z94.1-15; EN397:2012+A1:2012-5.2.4; EN12492:2012-4.2.1.2, 4.2.1.3, 4.2.1.4 Universal accessory slots on both sides for attaching hearing protection, face shield and more Reverse donning: suspension can be switched to wear hard hat backwards This model includes Klein Rechargeable Headlamp/Worklight (Cat. No. 56062) with charging cable Accessories and replacement parts (sold separately): Rechargeable Headlamps (Cat. Nos. 56049, 56048, 56062), Alkaline Headlamp (Cat. No. KHH56220), Sweatband, Top Pad, Chin Strap, Suspension System (Cat. Nos. KHHSWTBND, KHHTOPPAD, KHHSTP, KHHSPN) Technical Information Hat Style: Cap Type: Type 1 Application: Class E Special Features: Tested up to 20kV Standard: ANSI Z89.1-2014, CSA Z94.1-15, EN397:2012+A1:2012-5.2.4-Lateral Deformation (LD) EN12492:2012-4.2.1.2, 4.2.1.3 Venting: No Suspension: 4-point Suspension Adjustment: Ratchet with Pivot Shell Lining: Padded, Sweat-wicking and Odor Resistant; Machine Washable Accessory Slots: Front, Back, and Both Sides Shell Material: PC/ABS Shell Color: White Hat Size: 6.5 to 8 (52 to 64 cm diameter) Bulb Type: LED Lumens: Boost: 300; Spot/High: 215; Flood/Low: 100 Battery Life: 14 hrs. Flood/Low Mode; 9 hrs. Spot/High Mode; 4 hrs. Boost Mode Batteries: Lithium-Ion Material: PC/ABS Overall Length: 11.5'' (29.2 cm) Overall Height: 6.5'' (16.5 cm) Overall Width: 8.8'' (22.4 cm) Included: Hard Hat, Rechargeable Headlamp, Charging Cable, User Guide, Reflective Stickers Weight: 1.2 lb (0.5 kg) Document Brochure Instructions Safety Data Sheet

Description Klein Tools' Interchangeable Insulated Screwdriver Set includes an insulated handle and 5 interchangeable insulated blades for quick changes on the job. The auto-eject mechanism works with just a twist, allowing you to change or flip blades simply and easily. A bright orange coating of insulation protects from electrical shock, as well as being flame and impact resistant. Klein insulated tools exceed the ASTM F1505 standards for insulated tools, and are clearly marked with the official 1000-volt rating symbol. The set of five Phillips, Square and Slotted slim-tip blades come in a protective roll pouch, making this the perfect set for your tool bag. Benefits Interchangeable Insulated Screwdriver Set with an insulated handle, 5 interchangeable insulated blades, and a carrying pouch Screwdriver Set includes tip sizes: two #2 Phillips, two 1/4-Inch Slotted, one #1 Phillips, one #1 Square, one #2 Square, and one 3/16-Inch Slotted Securely and easily release the blade with a quick twist of the lock collar Interchangeable blades with a slim-tip to fit tight terminal blocks Handle and blade have a 1000-Volt insulation rating and meets or exceeds ASTM F1505 standard for insulation A layer of orange impact and flame resistant insulation protects from electric shock Cushion-Grip handles for greater torque and comfort Double-ended blades have a 3.5-Inch shaft length, single-ended blades have 5.75-Inch shaft length Durable, carrying roll pouch keeps the set organized and protected Technical Information Application: Work Near Energized Sources Special Features: Cushion-grip Handle Included: Pouch, Handle, #2PH Single-End Blade, 1/4''SL (6 mm) Single-End Blade, #1SQ / #2SQ Double-End Blade, #1PH / 3/16''SL (5 mm) Double-End Blade, and #2PH / 1/4''SL (6 mm) Double-End Blade Magnetic: No Insulated: Yes Shank Length: Double-End: 3.5'' (8.9 cm); Single-End: 5.75'' (14.6 cm) Material: Induction Hardened Steel Handle Material: Rubber, High-Dielectric Plastic Handle Color: Black/Orange Handle Length: 4.7'' (11.9 cm) Handle Diameter: 1.25'' (3.2 cm) Overall Length: 8.25'' (21.0 cm) Overall Height: 1.75'' (4.4 cm) Overall Width: 4.25'' (10.8 cm) Number of Pieces: 7 Type: Insulated, Interchangeable Blade Standard: Meets or Exceeds ASTM F1505 Weight: 14.7 oz (417 g) Document Brochure

Description This kit includes the tools necessary to tone and trace wires in common wiring systems. This premium tone generator has Angled Bed of Nails (ABN) clips that securely grip the cable. Tone Generator emits five distinct tones. An RJ11 plug easily connects to telephone or RJ45 data jacks for toning. The toner, also checks continuity and polarity that are indicated by clearly labeled LEDs. The probe traces with the tones signal. The adjustable-volume speaker amplifies the tone. The 3.5 mm jack allows for headphones (sold separately) to be attached in noisy environments. The probe has a tool-less non-metallic durable replaceable tip. The probe enables testing in distribution blocks without disturbing other services. Benefits Includes a professional grade tone generator and tracing probe for non-active wiring Toner-Pro features 5 distinct tone cadences, transmits 1,000+ feet Rugged Angled Bed of Nails (ABN) clips securely attach to wires RJ11 plug easily connects to telephone and RJ45 data jacks to tone wire pair Toner-Pro tests for continuity and polarity with results indicated by clearly labeled LEDs Probe-Pro features 3.5 mm headphone jack for noisy environments (headphones not included) Responsive probe with durable non-metallic, replaceable conductive tip (VDV999-068) - sold separately Work light on probe tip for use in dark spaces Terminal block on probe to confirm the toned pair Each tool includes 4X AAA batteries Custom, padded, divided, zipper pouch for convenient storage (VDV770-500) included with kit Technical Information Brochure Instruction Manual Type: Tone Generator Tracing Probe Application: Wire Toning & Tracing Special Features: Angled Bed of Nails with (ABN) Clips, 5 Distinct Cadences, Worklight Overall Length: 7'' (17.8 cm) Overall Height: 12'' (30.5 cm) Overall Width: 3'' (7.6 cm) Material: Plastics, Metal, PCB Boards and LEDs Batteries: 8 x AAA Included: Probe-Pro Tracing Probe (No. VDV500-123); Toner-Pro Tone Generator (No. VDV500-063); Pouch (No. VDV770-500), 8 x AAA Batteries Weight: 13.1 oz (0.37 kg)

Description Klein Tools Tape Measures offer inventive first-rate features derived from jobsite professionals to make jobs easier and more efficient. This tape measure features a magnetic double hook that has a center top portion for hanging onto conduit, right side up and upside down, while a 1-1/4 inch flared hook was designed specifically to pass-through 1-3/8 inch holes drilled for 1-inch conduit. The large magnet profile attaches to steel and along EMT conduit while the sealed tape brake panel is large enough to allow 2-3 fingers to operate at once for a safe retraction and, keeps water and dirt out to prevent tape blade rust and deterioration. The high impact rugged rubberized industrial design offers a better grip and stands up to any task the jobsite demands. Benefits Uncluttered, easy-to-read bold lines marked on the blade every 1/8-Inch Dual angle magnetic hooks attach to conduit and steel studs Heavy-duty nylon-coating protects blade printing Retraction speed brake controls blade speed and protects fingers from touching blade Blade printed Conduit Bending Table helps calculate offsets and saddles Super-sized back clip holds securely to wide belts and extends deep into pockets Up to 9-1/2-foot stand-out U.S. Patent Pending Technical Information Belt Clip: Yes Blade Coating: Nylon Blade Color: Yellow Blade Length: 25 Ft. Blade Material: Steel Case Color: Orange Case Material: ABS Plastic Electronic: No Graduations: 1/16" Hook: Double Lockable Blade: Yes Magnetic: Yes Measurement Standard: SAE Rewind Type: Automatic Features: Uncluttered, easy to read bold lines every 1/8" Type: Double-Sided Documents Klein Tools 25-Foot Magnetic Double-Hook Tape Measure Brochure

Description These Klein Tools Lineman's Pliers are induction hardened and have a hot-riveted joint for smooth and powerful action without handle wobble. Their unique tempered handle design, with dual material Journeyman handles, provide a better grip and absorbs the "snap" when cutting wire, screws, nails or ACSR. These side-cutting pliers also have cross-hatched knurled jaws, and built-in channels for pulling fish tapes without damage. Benefits Cuts ACSR, screws, nails and most hardened wire High-leverage design. Rivet is closer to the cutting edge for 46-percent greater cutting and gripping power than other plier designs Built-in crimper works on non-insulated connectors, lugs and terminals Built-in channel pulls steel fish tape without damaging the tape Hot-riveted joint ensures smooth action and no handle wobble Induction hardened cutting knives for long life Streamlined design with sure-gripping, cross-hatched knurled jaws Unique handle tempering helps absorb the ''snap'' when cutting wire Precision-hardened plier head for on-the-job toughness Custom, US-made tool steel Dual-material Journeyman™ handles provide a better grip without sacrificing tool strength and durability Hard, black material for toughness and durability Soft material on outer surface for comfort and a firm grip Color-coded yellow, dark blue, red, or light blue handles allow quick identification of the tool Features combination polished and black-oxide finish Technical Information Type: High Leverage Side Cutting/Pulling Pliers Application: ACSR, Screws, Nails, Most Hardened Wire; Crimps Non-insulated Connectors, Lugs and Terminals; Pulls Steel Fish Tape Overall Length: 9.5'' (24.1 cm) Material: Steel Nose Type: New England Jaw Length: 1.594'' (4.1 cm) Jaw Width: 1.25'' (3.2 cm) Jaw Thickness: 1.59'' (4.1 cm) Knife Length: 0.781'' (2 cm) Handle Color: Blue/Black Handle Finish: Journeyman Handle Length: 7.375'' (18.7 cm) Insulated: No Tether Capable: No Weight: 1.1 lb (0.5 kg)

Description Driller's Dust Bowl is a clean and easy way to drill holes. The dust bowl seals against the work surface and traps all dust and debris as you drill. No adjustments needed, simply load your hole saw through the grommet at the bottom of the drill bowl and attach the arbor to the drill as normal. Benefits Works with hole saws up to 8" Easily disposable of debris Saves time on cleaning up at the end of the day Protects eyes and health in general Easily fits drills or hole saws Compresses around work surfaces Technical Information Brand: Rack-A-Tiers Material: Plastic Application: Sawdust Part #: 48000

Description This beautiful double Claro wallplate is perfectly designed to complement your fan speed controls, lighting dimmers, switches, receptacles, cables, and phone jacks. It offers a clean design with no visible screws and is flush mounted to the wall. Benefits 2-Gang standard size decorator wallplates, mounts flush to the wall for a clean, sleek appearance with no visible screws For use with standard decorator-style dimmers, switches, and accessories Easy to install. Simply separate the front and back plates, attach the backplate to the wall with the screws provided and snap on the front plate Double plastic construction provides long-lasting style

Description Arlington recessed, non-metallic combination power and low voltage TV BOX is the secure, easy way to mount a flat-screen TV flush against a wall. It features power in one side; low voltage in the other for Class 2 wiring of the satellite, cable TV, speakers, surround sound systems and more. Benefits Plugs and connectors stay inside the two-gang box, without extending past the wall Non-metallic box with paintable white trim Easy to install - secure installation in walls up to 1-1 /2" thick Mounting wings hold box securely against the wall in rework projects Boxes screw-mount to stud in new construction Low voltage divider included Can be used with Arlington's SCOOP series entrance plates and hoods cUL listed Technical Information Model: TVBU505GC Height: 6.942" Width: 6.254" Colour: White Material: Plastic Trade Size: 2-Gang Wall Depth: 1/2", 5/8", and up to 1-1/2" Documents Specification Sheet TVBU505 Line Drawing

Description Decora tamper-resistant receptacles comply with the latest NEC® requirements for use in residences and childcare facilities. Featuring a contemporary appearance, the impact-resistant thermoplastic design allows for quick installation, durability and a long service life in homes, offices, schools, guest rooms and other settings. Benefits 15 Amp, 125 Volt Straight Blade Quickwire Push-In & Side Inside shutter mechanism blocks access to the contacts unless a two or three-prong plug is inserted UL listed & CSA approved Technical Information Brand: Decora Type: Duplex Receptacle Blade Type: Straight Blade Amperage: 15A Voltage: 125 VAC Pole: 2 pole Wire: 3 Grounding: Grounding NEMA: 5-15R Termination: Quickwire Push-in & Side

Description Meet the most discreet convector on the market! The Mirage convector heats any room with high precision, whether in a home or a business. A true chameleon, its modern and exclusive design allows it to blend elegantly into your decor. Benefits Ideal for the kitchen, living room, basement, bedroom and office space Sturdy one-piece front panel Completely quiet Surface-mounted only Wall mounted at least 4 in. from the floor Concealed mounting bracket (included) Back entry plate with cable clamps (included) Built-in electronic thermostat with LCD screen Automatic temperature lowering at night (Automatic mode) Maximum temperature setpoint lock option (Security mode) Five year warranty *three years on electronic components Technical Information Color: White Wattage: 1500W Voltage: 240V Height: 457mm (18 in) Length: 749mm (29-1/2in) Weight: 8 kg (17.75 lbs) Control: Built-in Electronic thermostat Finish: Epoxy-Polyester Powder coat Element: Two stainless steel tubular sheathed elements insulated with nylon sleeves Mounting: Surface mount only, at least 4 in from the floor. Document Specification Sheet User's manual

Description Croc's Strippers are the best strippers on the market. They have countless features, each designed to make your job easier and more productive. Benefits Ergonomic hourglass-shaped handles for comfort and speed Needle nose tips Strips conductor sizes from #10 down to #22 AWG (for telephone wire) Large cutting blades for easy general purpose cuts Barrel sleeve crimper near the pivot 14/2 and 12/2 NMSC stripper at the nose, makes strippers easy to use in electrical boxes 6/32 and 8/32 Screw Cutters Glow in the dark handles Colour may differ Technical Information Brand: Rack-A-Tiers Size: 11 x 7 x 1" Cabel Size: 22 to 10 AWG Cabel Type: Telephone Handle Type: Ergonomic/Hourglass Jaw Type: Needle Nose Shearing Capacity: #6-32 Bolt Series: Croc's Standard/Approvals: RoHS Compliant Part #: 47000

Description The Klein Tools' Red Pocket Laser Level is a high-performance laser leveling and alignment tool for DIY'ers and professionals alike. The powerful red laser line is easy to see and use in all lighting conditions. The adjustable body and 3-axis lighted bubble vials allow a user to project laser lines at any angle the user needs. The fine adjust knobs enable easier precision adjustments than other laser levels. Features Projects single red laser line up to 30 feet (9.1 m) indoors, providing ample coverage for a wide range of applications Laser body has a 360-Degree rotation for projecting lines at any angle Horizontal and vertical fine adjust knobs allow for easier precision adjustment of the laser line without having to move the unit Compact design is easy to use and transport at home, on the job, or anywhere in between 3-axis bubble vials illuminate for enhanced viewing and leveling Two powerful magnets, 1/4-20 thread tripod mounting, a hang hole, and built-in kickstand give a variety of mounting options Over 12-Hour runtime with 2 AAA alkaline batteries and low battery warning Technical Information Type: User Adjustable Pocket Laser Level Application: Leveling Alignment Tool Special Features: Embedded Kickstand, 3-Axis Vials, Fine Adjust Knobs Material: Resins, Elastomers, Metallic Batteries: 2 x AAA Laser Wavelength: 630-640nm Laser Safety: IEC 60825-1:2014/A11:2021, EN 50689:2021 Number of Beams: 1 Laser Color: Red Plumb Laser: No Indoor Range: 30' (9.1 m) Outdoor Range: 30' (9.1 m) Maximum Distance: 30' (9.1 m) Display: No Number of Vials: 3 Type of Vials: Lighted Bubble Accuracy: Vials; 0.043-Degree (0.75mm/1,000mm) Pulse Mode: No Receiver: No Magnet Type: Rare Earth - Neodymium Drop Protection: 3' (1 m) Ingress Protection: IP54 Transit Locking Mechanism: No Low Battery Alarm: Yes Low Battery Indicator: Yes Out-of-Level Indicator: No Standard: Complies with 21 CFR 1040.10 and 1040.11 Except for Conformance with IEC 60825-1 Ed. 3., as Described in Laser Notice No. 56, Dated May 8, 2019 Mounting Type: Magnetic Bracket Bag or Case: No Included: Batteries, Manual Overall Length: 4.27'' (10.8 cm) Overall Height: 2.3'' (5.8 cm) Overall Width: 1.76'' (4.5 cm) Weight: 6.6 oz (186 g) Battery Life: 12 hr Document Brochure

Description Klein Tools' TradesmanPro™ XL Backpack is a seriously tough backpack that provides the perfect amount of storage and features to get you through your day. The innovative curved, fully-molded bottom design provides maximum comfort while helping keep your tools safe from the elements. The front compartment features 6 tool storage pockets for easy access to frequently used small tools, while the large interior has 27 pockets with plenty of room for large tools and equipment and unzips to fully open for easy access. The USB-C cord and exterior port make it easy to charge your devices at any jobsite. Features Tool Bag Backpack with large interior to easily carry power tools, zipper bags, and equipment 40 pockets for maximum tool and gear storage and includes a spacious interior for power tools Curved, fully-molded bottom is comfortable to wear and helps protect contents from the elements 1.5-Foot USB-C cord is included with a cord management system Exterior port for charging devices outside of the tool backpack Includes an internal headlamp bracket for use with a Klein Tools Headlamp (sold separately, Cat. No. 56062, 56049) to illuminate tool bag interior or external surroundings Hard, molded front pocket with dividers help protect items like phones and safety glasses Constructed with durable water resistant 1680d ballistic weave material Easily organize and access frequently-used tools in front pocket Main zipper designed to open bag fully for easy access Exterior tape measure clip and tape loop Extra padding on the shoulder straps Technical Information Type: Tool Backpack Application: Tool Carrying Special Features: External USB-C Port Number of Pockets: 40 Interior Pockets: 27 Exterior Pockets: 13 Overall Length: 14.75'' (37.5 cm) Overall Height: 20'' (50.8 cm) Overall Width: 11'' (27.9) Material: 1680d Ballistic Weave Body; Hard Molded Polypropylene Bottom Color: Black/Orange Capacity: 1584 cu in (25957.1 cc) Closure Type: Zipper Handle: Double Handle Weight: 7.5 lb (3.4 kg) Document Brochure

Description Meet the most discreet convector on the market! The Mirage convector heats any room with high precision, whether in a home or a business. A true chameleon, its modern and exclusive design allows it to blend elegantly into your decor. ***You will need a wall thermostat to control this unit*** Benefits Ideal for the kitchen, living room, basement, bedroom and office space Sturdy one-piece front panel Completely quiet Surface-mounted only Wall mounted at least 4 in. from the floor Concealed mounting bracket (included) Back entry plate with cable clamps (included) Automatic temperature lowering at night (Automatic mode) Maximum temperature setpoint lock option (Security mode) Five year warranty *three years on electronic components Technical Information Color: White Wattage: 2000W Voltage: 240V Height: 457mm (18 in) Length: 902mm (35-1/2 in) Weight: 9.4 kg (20.75 lbs) Control: NOT INCLUDED Finish: Epoxy-Polyester Powdercoat Element: Two stainless steel tubular sheathed elements insulated with nylon sleeves Mounting: Surface mount only, at least 4 in from the floor. Document Specification Sheet User's manual