Skip to content
FAQ Shipping Returns Warehouse Pickup

Tools

Every project should include reliable tools for an easier, faster, efficient and secure installation. Whether you're looking for fish tape & conduit tools, hand tools, measuring tools, power tools, tool kits, tool storage or tool accessories, we've got you covered! 

Popular Categories

  • Klein Tools Glow in The Dark High Leverage Side-Cutting Pliers, Model D20009NEGLW
    $64.99

    Klein Tools Glow in The Dark High Leverage Side-Cutting Pliers, Model D20009NEGLW

    Klein Tools
    Description No need to worry about losing your tools in the dark again with Klein Tools' Hi-Viz High Leverage Side-Cutting Pliers. The glow-in-the-dark grips can stay illuminated for up to 30 minutes! Plus, they charge in natural or artificial lighting. Benefits Glow in the dark grips to easily locate your tool in dark or low lit areas Grips charge in natural and artificial lighting Cuts ACSR, screws, nails, and most hardened wire High-leverage design; rivet is closer to the cutting edge for 46-Percent greater cutting and gripping power than other plier designs Sure-gripping cross-hatched knurled jaws NOTE: Glow time and intensity may vary if charged in low light. Clean grips regularly to maintain glow brightness Technical Information Type: Side Cutting Pliers Application: ACSR, Screws, Nails, Most Hardened Wire Overall Lenght: 9.4'' (23.9 cm) Material: Steel Nose Type: New England Jaw Lenght: 1.594'' (4.1 cm) Jaw Width: 1.25'' (3.2 cm) Jaw Thickness: 0.625'' (1.6 cm) Jaw Capacity: 1.375'' (3.5 cm) Knife Lenght: 0.781'' (2 cm) Joint Type: Locking Handle Color: Glow In The Dark Handle Finish: Plastic-Dipped Handle Lenght: 7.375'' (18.7 cm) Insulated: No Weight: 1.1 lb (0.5 kg) Documents Hi-Viz Glow in the Dark tools Brochure
    • Low stock
    • Eligible for free shipping
  • Klein Tools Digital Angle Finder, Model 935DAF
    $42.99

    Klein Tools Digital Angle Finder, Model 935DAF

    Klein Tools
    Description Klein Tools' Digital Angle Finder provides precision measurements for inside and outside angles, lengths, and calculates miter saw angles. It offers best in class accuracy of +/-0.2-Degree for quickly finding any angle and calculating the miter saw blade angle to ensure miter joints are cut to a perfect fit. The compact design with a single AAA battery and premium reverse contrast display allows for easy tool box storage and can be carried around in pockets. Features 3-in-1 Digital Angle Finder provides precision measurements for inside and outside angles, lengths, and calculates simple miter cut angles Efficient digital miter saw protractor function calculates the needed saw blade angle to cut miter joints with a perfect fit every time Machined ruler edges measure inside and outside angles with an accuracy of +/- 0.2-Degree Bright white LED display provides easy visibility in all lighting conditions Durable, rust resistant metallic ruler with deeply etched markings for long lasting clear readings Powered by a single AAA battery for an extended working life time Compact design that is easy to store and carry around in pockets Wide locking knob is easy to twist and firmly locks the rulers in place Technical Information Type: Digital Angle Finder Application: Angle Finding, Length Measurements, Miter Protractor Special Features: Precision Machined Edges, Reverse Contrast Display, Digital Miter Saw Protractor Calculator Material: Stainless Steel, ABS Plastic Accuracy: +/- 0.2° Drop Protection: 6.6' (2 m) Ingress Protection: IP54 Low Battery Alarm: No Batteries: 1 x AAA Included: Digital Angle Finder; Battery Overall Length: 8.5'' (21.6 cm) Overall Height: 0.9'' (2.3 cm) Overall Width: 1.4'' (3.6 cm) Weight: 6.9 oz (193 g) Document Brochure
    • Only 1 left in stock
    • Eligible for free shipping
  • Klein Tools 11-in-1 Multi-Bit Screwdriver / Nut Driver, Model 32500
    $24.99

    Klein Tools 11-in-1 Multi-Bit Screwdriver / Nut Driver, Model 32500

    Klein Tools
    Description This versatile 11-in-1 tool has everything the professional needs. The integrated screwdriver/nut driver shaft holds 8 popular tips and converts to 3 nut driver sizes. The blades are interchangeable for a quick and easy switch out while the Cushion-Grip handle allows for greater torque and comfort. With its versatility, this multi-purpose screwdriver/nut driver is the perfect tool to meet your needs on the job. Benefits Integrated screwdriver and nut driver shaft holds 8 popular tips and converts to 3 nut driver sizes Includes industrial strength heat treated bits: 3/8-Inch, 5/16-Inch, and 1/4-Inch nut drivers, #1 and #2 Phillips, 1/4-Inch, and 3/16-Inch slotted, T10 and T15 TORX, and #1 and #2 square recess Interchangeable blade for a fast and easy switch out; comfortable Cushion-Grip handle Blast finish bit tips provide a firm hold and reduce cam-out Technical Specifications Brand: Klein Tools Nut Driver Sizes: 3/8'', 5/16'', 1/4'' Philips Bits: #1, #2 Slotted Bits: 1/4'' (0.6 cm), 3/16'' (0.5 cm) Square Bits: #1, #2 TORX® Bits: T10, T15 Shank Length: 3" (7.6 cm) Overall Length: 7.25" (18.4 cm) Magnetic: No Insulated: No Documents Klein Screwdriver Brochure
    • Low stock
    • Eligible for free shipping
  • Klein Tools #2 Phillips Screwdriver, 7-Inch Round Shank, Model 603-7
    $15.99

    Klein Tools #2 Phillips Screwdriver, 7-Inch Round Shank, Model 603-7

    Klein Tools
    Description The Klein Tools 7-Inch #2 Phillips-Tip Screwdriver features a durable black tip that is precision-forged and ground with square edges to fit screw openings securely. Its shaft will not bond or twist in normal use due to integral flanges that provide an extra-strong, torque-proof anchor in the handle. This screwdriver is made of high-quality tempered steel. Benefits Tip-Ident, colour coded handle allows the user to quickly identify the screwdriver tip and type Flanges inside handle provide a solid, twist-resistant blade anchor Precision-machined tip provides an exact fit Cushion-Grip handle for greater torque and comfort Meets ASME & ANSI specifications NOT insulated. Will NOT protect against electrical shock Technical Information Brand: Klein Tools Tip Type: Philips Tip Size: #2 Overall Length 11.313" (28.7 cm) Shank Type: Length 7'' (17.8 cm) Magnetic: No Insulated: No Documents Klein Screwdriver Brochure
    • Only 1 left in stock
    • Eligible for free shipping
  • IDEAL Tuff Tote Ultimate Tool Carrier Premium Tan Leather, Model 35-975
    $378.84

    IDEAL Tuff Tote Ultimate Tool Carrier Premium Tan Leather, Model 35-975

    IDEAL
    Description The Tuff-Tote ® Ultimate Tool Carriers feature 2 divided compartments with 6 screwdriver loops, 1 large center compartment, 4 outside pockets and 8 outside tool loops. They have premium leather construction for durability, and are equipped with exclusive leather-wrapped grab handles for carrying comfort, in addition to removable shoulder straps to help relieve lower back strain. They offer rust-resistant, plated-steel hardware and heavy, lock-stitched nylon thread for long-term durability, and have an oil and moisture-resistance reinforced bottom. The unique stand-alone design keeps tools standing upright for easy identification and access. Features Eight-inch square tool carrier features two divided inside compartments with six screwdriver loops each, one large center compartment, four outside pockets and eight outside tool loops Exclusive leather-wrapped grab handle for carrying comfort Removable shoulder strap helps relieve lower back strain Unique stand-alone design keeps tools standing upright for easy identification and access Rust-resistant, plated-steel hardware and heavy, lock-stitched nylon thread for long-term durability Oil and moisture-resistant reinforced bottom Document Catalogue page
    • Only 1 left in stock
    • Free shipping
  • Klein Tools MODbox Tool Vest Combo, Model 55829MB*
    Special Order Item
    $189.99

    Klein Tools MODbox Tool Vest Combo, Model 55829MB*

    Klein Tools
    Description Klein Tools’ Tool Vest Combo's front pockets provide quick access to frequently used tools and is a versatile tool carrying system. The 2-Inch web belt can be used for MODBox™ Tool Pouches and slotted or tunnel loop pouches. Customize the fit with the adjustable padded waist and shoulder straps to evenly distribute the weight of tools, parts, and gear for all-day wearing comfort. Features Klein Tools Vest and Pouches allows you to move freely with everything you need to get the job done Front pockets and straps for easy access to frequently used tools, pens, and markers Fully adjustable padded waist and shoulder straps for all-day wearing comfort Breathable mesh padding to keep you cool and wick away moisture Attach any MODbox™, tunnel loop or slotted tool pouches that accommodate a 2-Inch (5.1 cm) belt Can be used with any Klein Tools MODbox™ tool and parts pouches Front and back straps adjust to fit anyone between 5-Foot 3-Inch and 6-Foot 3-Inch (160 to 191 cm) tall Technical Information Type: MODbox™ Tool Vest and Pouch Application: Tool Storage Special Features: Includes Vest, 9-Pocket Tools and Parts Pouch, 18-Pocket Tool Pouch Number of Pockets: 4 Size: One Size Fits Most Belt Width: 2'' (5.1 cm) Overall Length: 20'' (50.8 cm) Overall Height: 28'' (71.1 cm) Overall Width: 4'' (10.2 cm) Material: 1680d material Color: Grey Waist Size: 30'' to 52'' (76.2 to 132.1 cm) Weight: 5.7 lb (2.6 kg) UPC: 092644558290 Document Brochure
    • Available for special order
  • Klein Tools 3-in-1 Impact Flip Socket, 3
    Out of Stock
    $10.51

    Klein Tools 3-in-1 Impact Flip Socket, 3" Length, Model 32766

    Klein Tools
    Description The 3-in-1 Impact Flip socket allows for quick switching between drive sizes. For use on an impact driver, this versatile socket includes three hex sizes: 5/16-Inch, 1/4-Inch shallow (driver) and 1/4-Inch deep (bit holder). Rare-Earth magnet holds bits and hex head fasteners. Will also fit a Klein Tools screwdriver handle (Cat. No. 32308). Features 3-in-1 Impact Flip Socket allows for quick switching between drive sizes Multi-function flip socket in hex driver sizes: 5/16-Inch, 1/4-Inch shallow (driver) and 1/4-Inch deep (screwdriver bit holder) Impact rated with a 1/4-Inch Quick-Connect adapter for easy use on an impact driver Powerful Rare-Earth magnet securely holds bits and hex head fasteners 3-Inch (8 cm) length shaft also fits a Klein Tools Cat. No. 32308 driver handle Precision machined and heat treated for long life Great for various applications including tight spaces and low clearance areas Technical Information Type: Impact Flip Socket Application: Fastening; Impact Driving Special Features: Flip Socket, Rare-Earth Magnet Overall Length: 3'' (8 cm) Overall Height: 0.3'' (0.8 cm) Overall Width: 0.3'' (0.8 cm) Material: Steel Drive Size: 1/4'' Socket Size: 1/4'', 5/16'' Number of Points: 6 Standard: ASME B107.2 Weight: 3.2 oz (91 g) UPC: 092644327667 Document Brochure
    • Temporarily out of stock
    • Notify me when back in stock
  • Milwaukee M12™ Cordless 1/4 in. Ratchet (Tool Only), Model 2456-20
    Sale
    $193.28
    $158.00

    Milwaukee M12™ Cordless 1/4 in. Ratchet (Tool Only), Model 2456-20

    Milwaukee
    Description The Milwaukee M12™ cordless 1/4 in. ratchet kit features the best in class power, speed and durability with 30 ft/lbs of torque, 250 RPM, and a 5 year warranty. It is the shortest and most compact cordless ratchet on the market with a compact low profile head design. Weighing at only 1.9 lbs with battery the M12™ 1/4 in. ratchet is designed to fit in tight spaces and small engine bays while reducing user fatigue. The variable speed metal trigger slows for greater control over the task, as well as, increased durability that is able to withstand the jobsite. Additional features include an battery fuel gauge that displays the remaining run time and a built-in LED light illuminates the work surface. ***BATTERY AND CHARGER ARE NOT INCLUDED Features Powerful 12-volt motor: Delivers up to 30 ft-lbs of torque Superior fastening speed: Produces 250 RPM, with variable-speed trigger for greater control REDLITHIUM™ Battery Technology: Superior pack construction, electronics, and performance deliver more work per charge and more work over pack life than any battery on the market (NOT INCLUDED) REDLINK™ Intelligence: Provides optimized performance and overload protection using total system communication between tool, battery and charger On-board fuel gauge: Helps you monitor the charge precisely for less downtime on the job Built-in LED light: Illuminates work surfaces in dark locations Technical Information Length: 10-3/4" Voltage: 12V Power Source: Cordless Warranty: 5 Year Limited Warranty Peak Torque: 30 ft-lbs No Load Speed: 0-250 RPM Battery System: M12 Document Owner's Manual
    • In stock
    • Free shipping
  • Klein Tools Adjustable Screwdriver, #1 and #2 Square, Model 32708
    $26.99

    Klein Tools Adjustable Screwdriver, #1 and #2 Square, Model 32708

    Klein Tools
    Description The Adjustable Length screwdriver features a shaft that adjusts within 4-Inch to 8-Inch (10 to 12 cm) for numerous length choices. The shaft is removable and reversible with a different tip on each end. Carry fewer tools with this versatile multi-length, multi-bit driver. A variety of blade types are also available. Benefits Removable shaft adjusts within 4-Inch to 8-Inch (10-20 cm) range for numerous length combinations Blades feature a #1 and #2 Square tip for multiple screwdrivers in one tool Proprietary system securely holds blade - as durable as a traditional Klein fixed blade screwdriver Press down to extend or lengthen the shaft Push up to retract or shorten the shaft Cushion-Grip handle for maximum comfort and torque U.S. Pat. 6,561,523 Technical Information Type: Adjustable-Length Screwdriver Special Features: Adjusts 4'' (101.6 mm) to 8'' (203.2 mm) Tip Size: #1, #2 Square Shank Length: 4'' to 8'' (101.6 to 203.2 mm) Material: Steel Handle Material: Rubber Cushion-Grip Handle Color: Black Adjustable Length: 4'' to 8'' (101.6 to 203.2 mm) Overall Length: 13.375'' (339.7 mm) Weight: 0.10 lb (0.05 kg) Document Brochure
    • In stock
    • Eligible for free shipping
  • Klein Tools ACCU-BEND Level, 4 Vial, Model 935AB4V*
    Special Order Item
    $34.99

    Klein Tools ACCU-BEND Level, 4 Vial, Model 935AB4V*

    Klein Tools
    Description Klein's ACCU-BEND Magnetic Level helps eliminate dog legs and make conduit bending easier. Powerful Rare-Earth magnets with patented magnet track secure the level to any metal surface. The thumb screw attaches level to conduit to measure angles while bending. Large top-view vial windows are easy to ready from a variety of angles. High-visibility orange makes this level easy to find on the job site. Features Level with patented magnet track prevents powerful Rare-Earth magnets from falling out Thumb screw attaches level to conduit to measure angle while bending Large, easy-to-read high-visibility vials at 4 angles: level, 90, 45, and 30 degrees Large top-view vial windows enable easy readability from multiple angles High-visibility orange professional grade billet aluminum body is easy to see on conduit and at the jobsite V-Groove fits contour of conduit and pipe US Patent 9,964,407 Technical Information Type: ACCU-BEND™ Conduit and Pipe Application: Conduit and Pipe Special Features: Patented Magnet Track Secures the Level to Any Metal Surface Material: Aluminum Accuracy: +/- 0.029° Number of Vials: 4 Type of Vials: 0°, 90°, 45°, 30° Magnet Type: Rare Earth Overall Length: 6.25'' (15.9 cm) Overall Height: 0.75'' (1.9 cm) Overall Width: 1.476'' (3.7 cm) Weight: 5.9 oz (168 g) Document Brochure
    • Available for special order
  • Klein Tools 14-in-1 HVAC Adjustable-Length Impact Screwdriver with Flip Socket, Model 32304*
    Special Order Item
    $32.99

    Klein Tools 14-in-1 HVAC Adjustable-Length Impact Screwdriver with Flip Socket, Model 32304*

    Klein Tools
    Description The 14-in-1 HVAC Adjustable-Length Screwdriver features the most commonly used HVAC driver bits and nut drivers in one tool. Use as a screwdriver or as an impact driver attachment. Flip socket on end of blade has three positions for multiple functions. Great for tight spaces, impact driving and long reach applications. Features Adjustable Screwdriver includes 1/4-Inch and 5/16-Inch nut drivers with 12 driver bits conveniently housed in the handle Adjustable-length blade for use with an impact driver or Klein Tools Cat. No. 32303 or 32907 Multi-function 1/4-Inch socket has both shallow (driver) and deep (bit holder) configurations for added versatility Impact rated blade for use in an impact driver Powerful Rare-Earth magnet securely holds bits and hex head fasteners Includes the most commonly used HVAC bits and nut drivers all in one tool Includes #0, #1, #2 Phillips, 1/8-Inch (3.2 mm), 3/16-Inch (4.8 mm) and 1/4-Inch (6.4 mm) Slotted, #2 Square, T10, T15 , #2 JIS Bit, Schrader Valve Insertion Bit, and Core Removal Bit Cushion-Grip handle for maximum comfort and torque Great for various applications including tight spaces, impact driving and long reach Technical Information Application: Fastening; Impact Driving Special Features: Adjustable Length Screwdriver, Shaft Removes to be Impact Driver Attachment, Flip Socket Nut Driver Sizes: 1/4'', 5/16'' Phillips Bits: #0, #1, #2 Slotted Bits: 1/8'' (3.2 mm), 3/16'' (4.8 mm), 1/4'' (6.4 mm) Square Bits: #2 TORX® Bits: T10, T15 Other Bits: #2 JIS Bit, Schrader Valve Insertion Bit, and Core Removal Bit Magnetic: Yes Bit Retention: Magnetic Shank Length: 1'' to 4'' (2.5 to 10.1 cm) Material: Steel Barrel Insulated: No Handle Type: Cushion-Grip Handle Material: Plastic Handle Color: Black/Yellow Handle Length: 5.13'' (13 cm) Overall Length: 9.73'' (25 cm) Overall Height: 1.42'' (3.6 cm) Overall Width: 1.42'' (3.6 cm) Type: HVAC; Magnetic Weight: 8.8 oz (249 g) Document Brochure
    • Available for special order
  • Klein Tools Slim-Tip 1000V Insulated Screwdriver, #2 Square, 6-Inch Round Shank, Model 6946INS
    $19.99

    Klein Tools Slim-Tip 1000V Insulated Screwdriver, #2 Square, 6-Inch Round Shank, Model 6946INS

    Klein Tools
    Description Klein Tools' Slim-Tip Insulated Screwdrivers have slim profile tips that allow for greater access into terminal blocks, slim-style breakers, or other tight spaces near energized sources. A bright orange coating of insulation protects from electrical shock, is flame and impact resistant, and sits flush with the tip helping to reduce insulation chipping and cracking. Klein insulated tools exceed the ASTM F1505 standards for insulated tools, and are clearly marked with the official 1000-Volt rating symbol. A must-have for any electrician’s tool bag, these screwdrivers are available in 4 and 6-Inch lengths in a variety of tips and sizes. Features 6-Inch round shank, No. 2 Square, insulated screwdriver with a slim tip that allows for greater access into tight spaces 1000-Volt rated layer of orange impact and flame-resistant insulation protects from energized sources Insulated blade is flush with the tip to help reduce nicking the insulation Cushion-Grip handles for greater torque and comfort Made in USA Tip-Ident® quickly identifies the tip type and orientation Meets or exceeds ASTM F-1505-16 and IEC 60900:2018 Technical Information Application: For Work Near Energized Sources Special Features: Slim Profile Tip Tip Type: Square Magnetic: No Tip Size: #2 Shank Type: Round Shank Length: 6'' (15.2 cm) Material: Steel, Plastic Insulated: Yes Handle Material: Rubber Handle Color: Black Handle Length: 4.31'' (10.9 cm) Handle Diameter: 1.24'' (3.2 cm) Color Code: Orange Overall Length: 10.31'' (26.2 cm) Overall Height: 1.24'' (3.2 cm) Overall Width: 1.24'' (3.2 cm) Standard: ASTM F-1505-16, IEC 60900:2018 Type: Slim-Tip Insulated Screwdriver Weight: 2.9 oz (82 g) Document Brochure
    • Low stock
    • Eligible for free shipping
  • Klein Tools Folding Hex Key Set, 5-Inch, SAE, 5-Pieces, Model 70579
    $17.99

    Klein Tools Folding Hex Key Set, 5-Inch, SAE, 5-Pieces, Model 70579

    Klein Tools
    Description No need to worry about lost hex keys with Klein Tools 5-Key Folding Hex Key Set. This handy tool features five different size hex keys in a convenient folding tool that fits easily into your pocket or toolbox. The hex ends are square-cut so they fit securely into hex sockets. Benefits Two key positions (straight-out or right angle) for extra leverage Hex Key Size: 3/16'', 7/32'', 1/4'', 5/16'', 3/8'' Hex ends are square-cut for a secure full-depth fit and maximum contact with the hex socket to prevent slippage and stripping of the socket Handy sets fit in your pocket or toolbox easily and help eliminate the lost key problem Precision-chamfered hex ends eliminate problems due to cut-off burrs Convenient set reduces the likelihood of losing keys Technical Information Size: 3/16'', 7/32'', 1/4'', 5/16'', 3/8'' Handle Length: 5.375'' (13.7 cm) Key Lengths: 2.688 to 3.813'' (6.8 to 9.7 cm) Color: Silver Weight: 13.6 oz (386 g) Documents 5 Piece Folding Hex Key Set - 70579 Specification sheet
    • In stock
    • Eligible for free shipping
  • Klein Tools 9-in-1 Pass-Through Multi Nut Driver, Model 32809MAG
    $39.99

    Klein Tools 9-in-1 Pass-Through Multi Nut Driver, Model 32809MAG

    Klein Tools
    Description Klein's Magnetic 9-in-1 Pass-Through Multi-Nut Driver features fully pass-through drivers for driving nuts on threaded rod and prevents bottoming out. Nine SAE sizes in one tool with color coded ends make it convenient to identify the size needed for the job. All sizes allow for easy, one-handed driving. Increase your productivity and lighten your load with this multi-nut driver. Benefits Magnetic Nut Driver allows for one-handed driving, with nine sizes in one tool: 3/16, 1/4, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 3/4 in. Pass-through handle and barrels for fastening hex nuts onto threaded rod of any length Strong, Rare-Earth magnets securely hold nuts and bolts: 1/4 in., 5/16 in., 11/32 in., 7/16 in. Spring coil holds nuts and bolts in place without the use of magnets: 3/8 in., 1/2 in., 9/16 in., 3/4 in. Extended wrench-assist on barrels for added torque on tough jobs Color-coded bands for easy identification Heavy-duty, Cushion-Grip handle for greater torque and comfort 9-in-1 Nut Drivers with heavy-duty and pass-through handles Technical Information
    • In stock
    • Eligible for free shipping
  • Klein Tools Folding Utility Knife With Driver, Model 44304
    Out of Stock
    $25.99

    Klein Tools Folding Utility Knife With Driver, Model 44304

    Klein Tools
    Description Klein Tools' Folding Utility Knife with Driver is engineered to deliver ultimate versatility. Its folding design allows the blade to store closed so the knife is compact for storage and easy carry, while the intuitive side button release allows the knife to easily flick open and lock in both 135-Degree and 180-Degree configurations. The knife is also equipped with a fold out driver that locks in place at 180-Degree via liner lock and includes a removable impact rated 1/4-Inch nut driver and #2 Phillips bit. A tether hole is also included on the back end of the knife. Features Folding Utility Knife with Driver blade locks open at 135-Degree or 180-Degree angles for versatile cutting options Includes removable 1/4-Inch impact rated nut driver and #2 Phillips bit Intuitive side-button release for quick and easy opening Effortlessly fits into tool pouches and pockets, enhanced by a pocket-friendly belt clip Designed for ergonomic and comfortable use during tasks Triple ground blades make cutting tasks quick and easy Features a practical tether hole at the back of the handle Technical Information Type: Knife Application: Utility Knife Special Features: Fold-out Driver and Side Release Button Blade Length: 1'' (2.5 cm) Overall Length: 6.8'' (17.3 cm) Overall Height: 1.6'' (4.1 cm) Overall Width: 1'' (2.5 cm) Material: Plastic Length Closed: 4.3'' (10.9 cm) Blade Type: Utility Blade Blade Material: Steel Number of Blades: 1 Closure Type: Fold Out Handle Color: Orange Handle Material: Plastic Weight: 5.3 oz (150 g)
    • Temporarily out of stock
    • Notify me when back in stock
  • Milwaukee M18 FUEL™ 10
    Out of StockSale
    $754.31
    $598.00

    Milwaukee M18 FUEL™ 10" Pole Saw Kit w/ QUIK-LOK™, Model 2825-21PS

    Milwaukee
    Description The MILWAUKEE® M18 FUEL™ 10" Pole Saw w/ QUIK-LOK™ kit gives users the power to cut hardwood branches, reaches full throttle in under 1 second, and delivers up to 150 cuts per charge. The cordless pole saw is made up of two components – the M18 FUEL™ Power Head w/ QUIK-LOK™ and QUIK-LOK™ 10” Pole Saw Attachment. This M18 FUEL™ Power Head, part of the M18 FUEL™ QUIK-LOK™ Attachment System, is compatible with multiple attachments such as an Edger, Articulating Hedge Trimmer, and String Trimmer attachment. This gives users the ability to quickly swap out attachments on a single Power Head, delivering ultimate versatility and a lower cost of ownership. The POWERSTATE™ Brushless Motor gives users the power to maintain its speed in demanding applications without bogging down, outperforming higher voltage systems. The Motor is positioned in the rear of pole saw to provide the best combination of power, balance, and maneuverability. REDLINK PLUS™ intelligence gives users maximum performance and protection from overload, overheating and over discharge. The advanced electronic package also delivers instantaneous throttle response and a variable speed trigger giving users ultimate control over the power range. The M18™ REDLITHIUM™ HIGH OUTPUT™ XC8.0 Battery gives users best in class performance in all applications and delivers up to 150 cuts per charge. The M18 FUEL™ 10" Pole Saw w/ QUIK-LOK™ is part of the M18™ system which is fully compatible with over 200 tools. In addition to the cordless pole saw, the kit includes: a 3' Attachment Extension, Shoulder Strap, one M18™ REDLITHIUM™ HIGH OUTPUT™ XC8.0 Battery and an M18™/M12™ Rapid Charger. Benefits POWERSTATE™ Brushless Motor: Purposely built for the M18 FUEL™ Power Head w/ QUIK-LOK™ to generate the power and performance of high voltage platforms REDLINK PLUS™ Intelligence: Optimizes performance, provides overload protection preventing damage to tool and battery during heavy applications; compatible across the M18™ System. M18™ REDLITHIUM™ HIGH OUTPUT™ XC8.0 Battery Pack: Provides 50% more power and runs 50% cooler vs. M18™ REDLITHIUM™ XC Battery Packs Part of the M18 FUEL™ QUIK-LOK™ Attachment System RPM: 0-4600 Bar Length: 10" Chain Gauge: .043" Chain Pitch: 3/8" Low Profile Technical Information Height: 6.5" Length: 84" Weight: 12.7 lbs Width: 9" Power Source: Cordless Battery System: M18 Battery Voltage: 18V
    • Temporarily out of stock
    • Notify me when back in stock
  • Klein Tools Combination Knife and Scissors Sharpener, Model 48036
    $22.99

    Klein Tools Combination Knife and Scissors Sharpener, Model 48036

    Klein Tools
    Description Keep your blades sharp with the Klein Tools Knife and Scissors Sharpener. The sharpener features tungsten inserts that conveniently sharpen both sides of the blade at the same time. The built-in guard protects your hand and fingers while you cut. The sharpener has a compact and lightweight design making it easy to store or transport. Benefits High-grade, tungsten carbide inserts sharpen both sides of the blade at the same time Restores knife edge in three or four strokes To sharpen a pair of scissors, place the sharpener flat on its side, and with a few quick strokes, draw the scissors blade through the slot Built-in finger guard helps to protect your hand Lightweight, compact size for easy carrying and storage Technical Information Type: Knife and Scissors Application: Sharpen Knife and Scissors Special Features: High-Grade, Tungsten Carbide Inserts Sharpen Both Sides of the Blade at the Same Time Overall Length: 4'' (10.2 cm) Overall Height: 0.75'' (1.9 cm) Overall Width: 2.25'' (5.7 cm) Color: Yellow/Black Weight: 1.6 oz (45 g) Document Brochure
    • In stock
    • Eligible for free shipping
  • Klein Tools 20-in-1 Impact Driver Set with Screwdriver Bits and Flip Sockets, Model 32303HD*
    Special Order Item
    $52.99

    Klein Tools 20-in-1 Impact Driver Set with Screwdriver Bits and Flip Sockets, Model 32303HD*

    Klein Tools
    Description The 20-in-1 Impact Driver Set provides the essential screwdriving and nut driving tools all housed within one tool. The versatility provided allows for convenient swapping between the common nut driving sizes and quickly attaches to an impact driver or our 1/4-Inch quick-connect handles. Every component is impact-rated, making it an essential tool for the toughest driving applications. Features 13 screwdriver bits, 6 nut setter sizes and a 1/4-Inch bit-holder all in one compact tool Impact-rated sockets and screwdriver bits for the toughest driving applications Store screwdriver bits within the handle and flip sockets on the shaft for convenient carry Patented bit holding design allows the 1/4-Inch socket size to drive hex fasteners and hold screwdriver bits Bit tips include #0, #1, #2, #3 Phillips, 1/4, 3/16-Inch Slotted, #1, #2 Square, T10, T15, T20, T25 TORX®, #2 Combo and 1/4, 5/16, 3/8, 7/16, 1/2 and 9/16-Inch nut drivers Powerful Rare-Earth magnet to retain bits and hex bolts within sockets TORX® is a registered trademark of Acument Intellectual Properties, LLC Technical Information Application: Fastening; Impact Driving Special Features: Multi-Bit Nut Driver and Screwdriver; Screwdriver Bits Stored in Handle; Impact Rated; Flip Socket; Rare-Earth Magnet Nut Driver Sizes: 1/4'', 5/16'', 11/32'', 3/8'', 7/16'', 1/2'' Phillips Bits: #0, #1, #2, #3 Slotted Bits: 3/16'' (4.8 mm), 1/4'' (6.4 mm) Square Bits: #1, #2 Combo Bits: #2 TORX® Bits: T10, T15, T20, T25 Bit Retention: Magnetic Material: Steel Alloy Insulated: No Handle Type: Cushion Grip Handle Material: Plastic Handle Color: Yellow/Black Handle Length: 5.13'' (13.0 cm) Overall Length: 10.45'' (26.5 cm) Overall Height: 1.4'' (3.6 cm) Overall Width: 1.4'' (3.6 cm) Number of Pieces: 18 Type: Color Coded Weight: 10.56 oz (299 g) UPC: 092644328947 Document Brochure
    • Available for special order
  • Milwaukee Drawer Dividers for PACKOUT™ For the 3Drawer Tool Box, Model 48-22-8473
    $15.08

    Milwaukee Drawer Dividers for PACKOUT™ For the 3Drawer Tool Box, Model 48-22-8473

    Milwaukee
    Description The MILWAUKEE® Drawer Dividers for the PACKOUT™ 3Drawer Tool Box allows for customized storage. The adjustable drawer dividers are designed to create custom layouts to fit tools, accessories, and equipment. The Drawer Dividers work with the PACKOUT™ 3Drawer Tool Box (48228443). The QuickAdjust Dividers help keep tools and equipment organized the way users want. Features Quick-Adjust Dividers Designed to fit PACKOUT™ 3-Drawer Tool Box (48-22-8443) Dividers Allow You To Separate Drawer Layout to Fit Various Needs Each Kit Includes (2) Long Dividers Each Kit Includes (6) Small Dividers Arrange Dividers to Create up to (9) Compartments Customize the Drawer Layout to fit and Store Accessories and Small Parts Versatile Options for Tool Storage Limited Lifetime Warranty
    • In stock
    • Eligible for free shipping
  • Klein Tools Slim-Tip 1000V Insulated Driver, #1 Square, 6
    $19.99

    Klein Tools Slim-Tip 1000V Insulated Driver, #1 Square, 6" Shank, Model 6986INS

    Klein Tools
    Description Klein Tools' Slim-Tip Insulated Screwdrivers have slim profile tips that allow for greater access into terminal blocks, slim-style breakers, or other tight spaces near energized sources. A bright orange coating of insulation protects from electrical shock, is flame and impact resistant, and sits flush with the tip helping to reduce insulation chipping and cracking. Klein insulated tools exceed the ASTM F1505 standards for insulated tools, and are clearly marked with the official 1000V rating symbol. A must-have for any electrician’s tool bag, these screwdrivers are available in 4-Inch and 6-Inch lengths and a variety of tips. Features 6-Inch round shank, #1 Square, insulated screwdriver with a slim tip that allows for greater access into tight spaces 1000V rated layer of orange impact and flame-resistant insulation protects from electrical shock Insulated blade is flush with the tip to help reduce nicking the insulation and gain access into tight terminal blocks Cushion-Grip handles for greater torque and comfort Made in USA Tip-Ident® quickly identifies the tip type and orientation Meets or exceeds ASTM F-1505-16 and IEC 60900:2018 Technical Information Application: For Work Near Energized Sources Special Features: Slim Profile Tip Tip Type: Square Magnetic: No Tip Size: #1 Shank Type: Round Shank Length: 6'' (15.2 cm) Material: Steel, Plastic Insulated: Yes Handle Material: Rubber Handle Color: Black Handle Length: 4.31'' (10.9 cm) Handle Diameter: 1.25'' (3.2 cm) Color Code: Orange Overall Length: 10.31'' (26 cm) Overall Height: 1.25'' (3.2 cm) Overall Width: 1.25'' (3.2 cm) Standard: ASTM F-1505-16, IEC 60900:2018 Type: Slim-Tip Insulated Screwdriver Weight: 6.9 oz (82 g) Document Brochure
    • In stock
    • Eligible for free shipping
  • Klein Tools Glow Rod Set, 30-Foot, Model 56430
    $139.98

    Klein Tools Glow Rod Set, 30-Foot, Model 56430

    Klein Tools
    Description This specialty set of fish rods is the perfect solution for low-light applications. In addition to the six 5-foot glow rods, this set also includes an illuminated LED, a hook and a bullet nose tip making it a great option for telecom and datacom installations. The protective Splinter Guard™ coating on these fish rods guard your hands against fiberglass splinters. These mid-flex, 3/16-Inch rods can connect together easily up to a full 30-foot allowing wire to be pulled across long distances. Benefits Set of six 3/16-Inch (4.7 mm) diameter x 5-foot (1.5 m) long lightweight, extra-durable mid-flex glow rods that assemble up to a full 30-feet (9.1 m) Protective Splinter Guard™ coating keeps hands protected from fiberglass splinters Durable 1/4-Inch diameter stainless steel connectors Included: bullet nose, hook and LED-illuminated fish rod tip to attach, grab and guide wires Illuminated tip has tapered ends for easy pushing and pulling Ideal for low light applications; excellent for telecom and datacom installations U.S. Pat. No. 9,062,834 Technical Information Application: Electrical, Telecom, Datacom Special Features: Glow in the Dark, Illuminated Tip Overall Length: 30' (9.1 m) Material: Fiberglass Rods Coated with Splinter Guard Diameter: 0.188'' (0.5 cm) Included: (6) 5' (1.5 m) Glow Rods with Bullet Nose, Hook, and LED-Illuminated Tip Attachments Weight: 1.2 lb (0.5 kg) Document Brochure
    • Low stock
    • Free shipping
  • Klein Tools 3/16-Inch Cabinet Tip Screwdriver, 8-Inch, Model 601-8
    $13.99

    Klein Tools 3/16-Inch Cabinet Tip Screwdriver, 8-Inch, Model 601-8

    Klein Tools
    Description Cushion Grip handle allows for greater torque and comfort. Integral flanges inside handle provide solid, twist resistant blade anchor. Special heat treated shafts. Precision machined tip for exact fit. Premium chrome plated for smooth feel and corrosion resistance. Patented Tip Ident quickly identifies the type of screwdriver and screwdriver tip orientation. Meets or exceeds applicable ASME / ANSI specifications. Cabinet Tip screwdriver with round shank. Benefits Narrow cabinet tip permits blade access where space is limited Cushion-Grip handle for greater torque and comfort Premium chrome-plated for smooth feel and corrosion resistance Internal flanges inside handle provide solid, twist-resistant blade anchor Special heat-treated shafts Precision-machined tip for exact fit Tip-Ident® quickly identifies the screwdriver type and tip orientation Meets or exceeds applicable ASME / ANSI specifications Technical Information Tip Type: Cabinet Magnetic: No Tip Size: 3/16'' (4.8 mm) Shank Type: Round Shank Length: 8'' (20.3 cm) Material: Steel Insulated: No Handle Material: Rubber Handle Color: Black Overall Length: 11.75'' (29.9 cm) Weight: 3.2 oz (91 g) Document Brochure
    • Low stock
    • Eligible for free shipping
  • Klein Tools #2 Square-Recess Screwdriver, 4-Inch Round Shank, Model 662
    $12.99

    Klein Tools #2 Square-Recess Screwdriver, 4-Inch Round Shank, Model 662

    Klein Tools
    Description The Klein Tools #2 Square-Recess Tip Screwdriver features a 4-Inch round shank with a Robertson tip for square-recess screws. Patented Tip Ident colour-coded handle quickly identifies the type of screwdriver and screwdriver tip orientation. Designed to last long this screwdriver has a premium chrome-plate for a smooth feel and corrosion resistance. Benefits Works on most combination head receptacle, switch and panel screws Tip-Ident® colour-coded handle end quickly identifies the screwdriver type and tip orientation Special heat-treated, chrome plated shaft for corrosion resistance Cushion-Grip handle for greater torque and comfort Internal flanges inside handle provide solid, twist-resistant blade anchor Precision-machined tip for exact fit Meets ASME and ANSI specifications NOT insulated. Will NOT protect against electrical shock Technical Information Brand: Klein Tools Tip Type: Square - Recessed Tip Size: #2 Shank Type: Round Overall Length 8-1/4" (209.55 mm) Shank Length 4" (101.6 mm) Magnetic: No Insulated: No Documents Klein Screwdriver Brochure
    • In stock
    • Eligible for free shipping
  • Klein Tools 8-inch Long Nose Side-Cutters, Pliers, Model D203-8
    $44.99

    Klein Tools 8-inch Long Nose Side-Cutters, Pliers, Model D203-8

    Klein Tools
    Description These Klein Tools Long Nose Pliers are made of heavier induction hardened US-made steel for greater cutting power. As precision pliers, they have a long slim head design and a hot-riveted joint for smooth action while working in confined areas. These pliers are perfect electrical and linesman pliers because of their extended handles for improved maneuvering and leverage. Benefits Heavier design for greater cutting power Extended handles provide added reach and leverage Slim head design for working in confined areas Induction hardened cutting knives for long life Hot-riveted joint ensures smooth action and no handle wobble Plastic-dipped handles for comfort and ease of identification Custom, US-made tool steel Technical Information Application: Side Cutting Overall Length: 8.438'' (21.4 cm) Jaw Length: 2.313'' (5.9 cm) Jaw Width: 1'' (2.5 cm) Jaw Thickness: 0.5'' (1.3 cm) Point Diameter: 0.125'' (3.18 mm) Knife Length: 0.625'' (1.6 cm) Handle Color: Yellow Handle Finish: Plastic-Dipped Documents Brochure
    • Low stock
    • Eligible for free shipping
  • Klein Tools Slotted Screw Holding Driver Kit, 3/16-Inch and 1/4-Inch, Model 85153K
    $26.99

    Klein Tools Slotted Screw Holding Driver Kit, 3/16-Inch and 1/4-Inch, Model 85153K

    Klein Tools
    Description The Klein Tools 2-Piece Slotted Screw-Holding Screwdriver Set is designed with positive gripping action to hold, start and drive slotted screws in awkward, hard-to-reach places. The unique split-blade screw-holding driver can wedge into the screw slot. The exclusive Cushion-Grip™ handles offer greater torque and outstanding comfort. Benefits Slotted Screw Holding Driver Set includes 2 driver sizes: 3/16-Inch, 1/4-Inch Slotted screw-holding feature mechanically holds screws to work where stainless steel is required Essential when working with non-magnetic screws and installing overhead fixtures Durable to start and drive screws with 1 tool Engage the screw holding feature with just the slide of your thumb Cushion-Grip™ handle for greater torque and comfort Helps prevent dropping slotted screws on the jobsite Built to handle the tough jobs with ease Technical Information Application: Driving Slotted Fasteners Special Features: Screw Holding Tip Type: Slotted Magnetic: No Tip Size: 3/16'' (4.8 mm); 1/4'' (6.4 mm) Shank Type: Slotted Shank Length: 3'' (7.6 cm); 4'' (10.2 cm) Material: Steel Insulated: No Handle Material: Cushion Grip Handle Color: Black/ Yellow Handle Length: 2.82'' (7.16 cm); 4.41'' (11.20 cm) Handle Diameter: 0.84'' (2.13 cm); 1.25'' (3.18 cm) Color Code: Black/ Yellow Overall Length: 5.78'' (14.7 cm); 8.38'' (21.3 cm) Overall Height: 0.84'' (2.1 cm); 1.25'' (3.2 cm) Overall Width: 0.84'' (2.1 cm); 1.25'' (3.2 cm) Type: Screwdriver Set Weight: 1.20 oz (34 g); 3.7 oz (105 g)
    • In stock
    • Eligible for free shipping
  • Klein Tools 9/16 Inch Heavy-Duty Nut Driver, Model 635-9/16
    Out of Stock
    $21.99

    Klein Tools 9/16 Inch Heavy-Duty Nut Driver, Model 635-9/16

    Klein Tools
    Description Fastening nuts on threaded rods can be a struggle due to the confined space and obstructions around the rod. On long sections of threaded rod, traditional nut drivers bottom out so you can only get the nut so far up the rod. Klein Tools' Heavy-Duty Nut Driver features a through-handle and a completely hollow shaft to allow for nut driving on unlimited bolt lengths. Wrench assist provides greater torque while the magnetic tips will grab any nut appropriately. Benefits Hollow shaft allows for nut driving on unlimited bolt length Color coding for easy identification of different sizes Wrench assist for additional torque The magnetic feature helps retain the nut Heavy-duty shaft with classic Cushion-Grip handle Technical Information Brand: Klein Tools Nut Driver Sizes: 9/16'' Type: Hollow Magnetic: Yes Shaft Length: 4'' (10.2 cm) Overall Length: 9.391'' (23.9 cm) Material: Steel Insulated: No Documents KLein Nut Driver Brochure
    • Temporarily out of stock
    • Notify me when back in stock
  • Klein Tools 6-in-1 Stubby Screwdriver, Square Recess, Model 32594
    $22.99

    Klein Tools 6-in-1 Stubby Screwdriver, Square Recess, Model 32594

    Klein Tools
    Description The ratcheting mechanism on this stubby screwdriver lets you work faster with more efficiency. Includes 1/4-Inch and 5/16-Inch nut drivers. With its Cushion-Grip handle, the stubby interchangeable screwdriver/nut driver was designed for comfort and efficiency. Made of the highest-quality tempered steel, the strong, durable tips are manufactured with square edges to securely fit screw opening. They resist slippage and provide positive turning action. The strong nut driver function improves bit-holding power, even for tough applications. Benefits Ratcheting mechanism allows the user to work faster and with more efficiency Four different screwdriver bits including #1 and #2 Square, #2 Phillips and 3/16-Inch Slotted tips Includes 1/4-Inch and 5/16-Inch nut drivers Cushion-Grip handle for maximum torque and comfort Technical Information Nut Driver Sizes: 1/4'', 5/16'' Phillips Bits: #2 Slotted Bits: 3/16'' (0.5 cm) Square Bits: #1, #2 Shank Length: 1.297'' (3.3 cm) Overall Length: 3.5'' (8.9 cm) Material: Steel Documents 6-in-1 Stubby Screwdriver Brochure
    • Low stock
    • Eligible for free shipping
  • Klein Tools 9-Inch New England Nose, Lineman's Pliers, Model D213-9NE
    $48.97

    Klein Tools 9-Inch New England Nose, Lineman's Pliers, Model D213-9NE

    Klein Tools
    Description Klein Tools makes some of the world's finest pliers. These High-Leverage, Side-Cutting Pliers feature a rivet closer to the cutting edge which provides 46-Percent more cutting and gripping power than other pliers. Induction hardened cutting knives are extra durable for longer life. Benefits High-leverage design. Rivet is closer to the cutting edge for 46-percent greater cutting and gripping power than other plier designs Hot-riveted joint ensures smooth action and no handle wobble Induction hardened cutting knives for long life Streamlined design with sure-gripping, cross-hatched knurled jaws Unique handle tempering helps absorb the ''snap'' when cutting wire Precision-hardened plier head for on-the-job toughness Plastic-dipped handles for comfort and ease of identification ''Handformed'' handles for full gripping and cutting power Technical Information Type: High Leverage Side Cutting Pliers Application: #8 AWG Copper, Aluminum and Other Soft Metals Overall Length: 9.33'' (23.7 cm) Material: Steel Nose Type: New England Jaw Length: 1.594'' (4.1 cm) Jaw Width: 1.25'' (3.2 cm) Jaw Thickness: 0.625'' (1.6 cm) Jaw Capacity: 1.375'' (3.5 cm) Knife Length: 0.781'' (2 cm) Joint Type: Locking Handle Color: Dark Blue Handle Finish: Plastic Dipped Handle Length: 5.688'' (14.5 cm) Insulated: No Tether Capable: No Weight: 1.1 lb (0.5 kg) Documents Linemans's Pliers, New England Nose -D2139NE Brochure
    • Only 1 left in stock
    • Eligible for free shipping
  • Klein Tools Folding Utility Knife With Blade Storage, Model 44303*
    Special Order Item
    $19.99

    Klein Tools Folding Utility Knife With Blade Storage, Model 44303*

    Klein Tools
    Description Klein Tools' Folding Utility Knife with Blade Storage is crafted with precision from aluminum to stand out as the ultimate all-around knife in your bag. Its folding design ensures compact storage and effortless portability, while the intuitive side button release guarantees quick deployment. The blade locks in position at 135-Degree and 180-Degree positions for effortless cutting for every task. It is also equipped with a fold out blade storage compartment that comes pre-loaded with five extra blades. Features Folding Utility Knife With Blade Storage blade locks open at 135-Degree or 180-Degree angles for versatile cutting options Fold out blade holder stores and comes with five extra blades Intuitive side-button release for quick and easy opening Slot on top back of handle easily cuts straps when knife is closed Effortlessly fits into tool pouches and pockets, enhanced by a pocket-friendly belt clip Designed for ergonomic and comfortable use during tasks Features a practical tether hole at the back of the handle Technical Information Type: Knife Application: Utility Knife Special Features: Side Release Button Blade Length: 1'' (2.5 cm) Overall Length: 6.9'' (17.5 cm) Overall Height: 1.3'' (3.3 cm) Overall Width: 1.1'' (2.8 cm) Material: Aluminum Length Closed: 4.5'' (11.4 cm) Blade Type: Utility Blade Blade Material: Steel Number of Blades: 6 Closure Type: Fold Out Handle Color: Orange Handle Material: Aluminum Weight: 4.6 oz (130 g)
    • Available for special order
  • Klein Tools MODbox Pouch Clips (3 pk), Model 55838MB*
    Special Order Item
    $13.19

    Klein Tools MODbox Pouch Clips (3 pk), Model 55838MB*

    Klein Tools
    Description The Klein Tools Belt Pouch Clip is for use with all MODbox™ tool and part pouches and fits belts up to 2.5-Inch wide. The Tool Belt Pouch Clip allows for multiple belt set-ups and so pouches can be easily exchanged between tool belts or removed for storage. Features MODBox™ Tool Belt Pouch Clips fits any 2.5-Inch belt For use with all MODbox™ pouches Includes 3 clips per pack 30-Degree clip design allows for pouch to move with you to keep contents upright Locking mechanism secures clip to belt MODbox™ pouches sold separately Note: Tools sold separately Technical Information Type: MODbox™ Accessory Application: Tool Carrying Special Features: Connects to all MODbox™ Tool and Part Pouches Overall Length: 2.6'' (6.6 cm) Overall Height: 3.45'' (8.8 cm) Overall Width: 1.25'' (3.2 cm) Material: Plastic For Use With: MODbox™ Tool and Part Pouches Weight: 2.32 oz (66 g) Document Brochure
    • Available for special order
  • Klein Tools Klein-Kurve® Wire Stripper / Cutter, 8-20 AWG, Model K11095
    $29.99

    Klein Tools Klein-Kurve® Wire Stripper / Cutter, 8-20 AWG, Model K11095

    Klein Tools
    Description This Wire Stripper/Cutter features six stripping holes and a shear-cutting knife to handle 8-18 AWG Solid and 10-20 AWG Stranded wire, plus shearing holes for 6-32 and 8-32 bolts. Longer hand grip coverage provides a more comfortable grip while the updated lock tucks nicely out of the way. The narrow head design allows this tool to easily get into tight places. Benefits Wire Stripper with six precision ground stripping holes for 8-18 AWG Solid and 10-20 AWG Stranded wire Narrower head geometry gets into hard to reach places Screw shearing holes for 6-32 and 8-32 bolts Precision, shear-like blades provide clean cuts Dual wire looping holes Updated lock tucks out of the way Coil spring provides fast self-opening action Klein-Kurve™ comfort grip handles with extended tool coverage Technical Information Type: Wire Stripper/Cutter Application: Cuts and Strips Wires Special Features: Integrated Lock Material: Steel Insulated: No Strips and Cuts: 8-18 AWG Solid, 10-20 AWG Stranded Screw Shearing: 6-32 and 8-32 Wire Gauge: 8-18 AWG Solid, 10-20 AWG Stranded Hold-Open Spring: Yes Overall Length: 7.4'' (19 cm) Overall Height: 0.61'' (1.5 cm) Overall Width: 2.33'' (6 cm) Handle Color: Blue/White Handle Finish: Comfort Grip Weight: 0.4 lb (0.2 kg) Document Brochure
    • In stock
    • Eligible for free shipping
  • Klein Tools #2 Phillips Screwdriver, 4
    Special Order Item
    $19.66

    Klein Tools #2 Phillips Screwdriver, 4" Round Shank, Model 603-4*

    Klein Tools
    Description The Klein Tools #2 Philips Screwdriver, f eatures a cushion grip handle for greater torque and comfort. Its precision-machined tip provides an accurate fit and a more consistent geometric symmetry than conventional Phillips-tip screwdrivers. Easily identify your screwdriver tip and type with Tip-Ident; colour coded engravings on the bottom of the driver. Benefits Precision-machined tip provides accurate fit and torque without slippage Tip-Ident allows the user to quickly and easily identify the driver tip and type Cushion grip handle allows for greater torque and comfort Tip is precision-machined to provide a more consistent geometric symmetry than conventional Phillips-tip screwdrivers Chrome-plated shaft - heat-treated for corrosion resistance Internal flanges inside provide twist-resistant blade anchor Meets ASME & ANSI specifications Technical Information Brand: Klein Tools Tip Type: Phillips Tip Size: #2 Shank Type: Round Overall Length 8-5/16'' (21 cm) Shank Length 4'' (10.2 cm) Magnetic: No Insulated: No Documents Klein Screwdriver Brochure
    • Available for special order
  • Klein Tools Glow in The Dark Diagonal Cutting Pliers, 8-Inch, Model D200028GLW
    $49.99

    Klein Tools Glow in The Dark Diagonal Cutting Pliers, 8-Inch, Model D200028GLW

    Klein Tools
    Description No need to worry about losing your tools in the dark again with Klein Tools' Hi-Viz Diagonal Cutting Pliers. The glow-in-the-dark grips can stay illuminated for up to 30 minutes! Plus, they charge in natural or artificial lighting. Benefits Glow in the dark grips to easily locate your tool in dark or low lit areas Grips charge in natural and artificial lighting Cuts ACSR, screws, nails, and most hardened wire High-leverage design. Rivet is closer to the cutting edge for 36-Percent greater cutting and gripping power than other plier designs Short jaws and beveled cutting edges permit close cutting of wire, nails, and most hardened wire NOTE: Glow time and intensity may vary if charged in low light. Clean grips regularly to maintain glow brightness Technical Information Type: Diagonal Cutting PLiers Application: ACSR, Screws, Nails, Most Hardened Wire Overall Lenght: 8.063'' (20.5 cm) Material: Steel Jaw Lenght: 0.813'' (2.1 cm) Jaw Width: 1.188'' (3 cm) Jaw Thickness: 0.813'' (2.1 cm) Joint Type: Hot Riveted Handle Color: Glow In The Dark Handle Finish: Plastic Dipped Handle Lenght: 4.75'' (12.1 cm) Insulated: No Tether Capable: No Weight: 9.6 oz (272 g) Documents Brochure
    • In stock
    • Eligible for free shipping
  • Klein Tools Laser Level, Self-Leveling Green Cross-Line and Red Plumb Spot, Model 93LCLG
    Out of StockSale
    $299.99
    $249.99

    Klein Tools Laser Level, Self-Leveling Green Cross-Line and Red Plumb Spot, Model 93LCLG

    Klein Tools
    Description The Klein Tools Self-Leveling Green Cross-Line Laser Level is a high-performance laser leveling and alignment tool for professionals. This level provides a reliable pendulum self-leveling system with clear, bright laser level lines, and a 90-degree vertical plumb spot feature. Equipped with an integrated magnetic mount and an additional ceiling clip mount, Klein’s cross-line level enables a multitude of alignment and layout applications. Benefits Self-leveling laser level is easy-to-read with green horizontal and vertical laser lines and red plumb spot lasers Projects horizontal and vertical lines independently or together to address various alignment tasks Integrated magnetic 360-Degree mounting bracket with 1/4-Inch and 5/8-Inch tripod mounting threads Magnetic bracket facilitates attachment to ferromagnetic objects such as steel studs, doors, beams or electrical panels Additional mounting clamp attachment for use on ceiling grid applications Low battery indicator and easily accessible battery compartment Water and dust resistant (IP54) Hard plastic carrying case included Technical Information Type: Laser Application: Self-Leveling Laser Alignment Instrument that Delivers Horizontal and/or Vertical Cross Lines, and/or Plumb Spots Special Features: Integrated Magnetic 360° Mounting Bracket with 1/4'' and 5/8'' Tripod Mounting Threads; Mounting Clamp Attachment; Excessive Tilt Indicator Material: ABS Housing and Electronic Components Batteries: 3 x AA Laser Wavelength: 515-530 nm (Cross-Lines), 630-680 nm (Plum Spots) Laser Safety: ≤1mW Each Beam, Class 2 Laser Product Number of Beams: Four Horizontal, Vertical, Plumb Up, Plumb Down Plumb Laser: Yes Indoor Range: - Outdoor Range: 65' (20 m) Maximum Distance: 70' (21 m) Accuracy: ±3/32'' per 33' (±2 mm per 10 m) Vertical and Horizontal Beams, ±1/8'' per 33' (±3 mm per 10 m) Plum Spot Magnet Type: Permanent Rare Earth Drop Protection: 3.3' (2 m) Ingress Protection: IP54: Water and Dust Resistant Transit Locking Mechanism: Yes Low Battery Indicator: Yes Standard: EN61326-1, EN60825-1, 21 CFR 1040.10 and 1040.11 Bag or Case: Hard Carrying Case Included: Hard Carrying Case, Instruction Manual, Mounting Clamp, 3 x AA 1.5V Alkaline Batteries Overall Length: 5.3'' (13.5 cm) Overall Height: 5.0'' (12.7 cm) Overall Width: 2.6'' (66 cm) Weight: 1.5 lb (0.68 kg) Documents Brochure Instruction Manua l
    • Temporarily out of stock
    • Notify me when back in stock
  • Klein Tools #1 Square Recess Screwdriver, 8-Inch Shank, Model 665
    $14.99

    Klein Tools #1 Square Recess Screwdriver, 8-Inch Shank, Model 665

    Klein Tools
    Description The Klein Tools #1 Square-Recess Tip Screwdriver has an 8-Inch Round-Shank for work on combination head receptacles, switch and panel screws. The Cushion-Grip handle allows for greater torque and comfort. Patented Tip-Ident quickly identifies the type of screwdriver and screwdriver tip orientation. Benefits Precision-machined tip provides accurate fit and torque without slippage Tip-Ident allows the user to quickly and easily identify the driver tip and size Cushion grip handle allows for greater torque and comfort Precision-machined tip provides a more consistent geometric symmetry than conventional Phillips-tip screwdrivers Chrome-plated shaft - heat-treated for corrosion resistance Internal flanges inside provide twist-resistant blade anchor Meets ASME & ANSI standards Technical Information Brand: Klein Tools Tip Type: Square-Recess Tip Size: #1 Shank Type: Round Overall Length: 11.75" (29.9 cm) Shank Length 8" (20.3 cm) Magnetic: No Insulated: No Documents Klein Screwdriver Brochure
    • Low stock
    • Eligible for free shipping
  • Klein Tools 1/8-Inch Cabinet Tip Mini Screwdriver 4-Inch, Model 608-4
    $10.99

    Klein Tools 1/8-Inch Cabinet Tip Mini Screwdriver 4-Inch, Model 608-4

    Klein Tools
    Description Klein Tools' Mini Screwdriver, 1/8-Inch Cabinet Tip, provides professionals with a precise formed tip screwdriver for an exact fit in small screw applications. Its Cushion-Grip handle provides greater torque and comfort. Specially heat-treated for added durability and long tool life. Benefits Precision formed tip provides an exact fit for small screw applications Cushion-Grip handle for greater torque and comfort Premium chrome-plated for a smooth feel and corrosion resistance Internal flanges inside handle provide solid, twist-resistant blade anchor Special heat-treated shafts for added durability Precision-machined tip for an exact fit Tip-Ident quickly identifies the screwdriver type and tip orientation Meets ASME / ANSI specifications Technical Information Brand: Klein Tools Tip Type: Cabinet Tip Size: 1/8" (3.2 mm) Overall Length: 6.75" (17.2 cm) Shank Length: 4'' (10.2 cm) Material: Steel Magnetic: No Insulated: No Documents Klein Screwdriver Brochure
    • Low stock
    • Eligible for free shipping