Tools

Description The M12™ FUEL™ 3/8 in. Stubby impact wrench is the industries most Compact Impact Wrench on the market place. Measuring only 4.8 in. in length, this tool fits in tighter spaces, making users more productive. Increased torque delivers an industry leading 250 ftlbs of breakaway torque, removing even the most stubborn bolts and fasteners. 4Mode drive control, will allow unmatched control in various fastening applications. 1 to 3 RPM allows for precision control, and auto shut off mode in the 4th setting will prevent over fastening of bolts while doing reassembly work. ***BATTERY AND CHARGER ARE NOT INCLUDED Features Most Compact. Greatest access in tight spaces at 4.8" in length Up to 250 ft.-lbs. of nut-busting torque 4-Mode Drive control Auto-Shut Off mode reduces over fastening and increases productivity POWERSTATE™ Brushless Motor provides more power, more run-time, and longer life. REDLINK PLUS™ Electronic Intelligence enables advanced communication between your batteries and tools, allowing for unmatched levels of performance, protection, and productivity. REDLITHIUM™ batteries deliver more work per charge and more work over the life of the battery (NOT INCLUDED) Technical Information Height: 7.00" Length: 4.8" Tool Warranty: 5 Year Limited Warranty Voltage: 12V Weight: 2 lbs Width: 2.40" Power Source: Cordless Motor Type: Brushless IPM: 3200 RPM: 2700 Battery System: M12 Document Owner's Manual

Description The M12™ FUEL™ 1/4 in. Stubby impact wrench is the industries most Compact Impact Wrench on the market place. Measuring only 5.1 in. in length, this tool fits in tighter spaces, making users more productive. Increased torque delivers an industry leading 100 ftlbs of breakaway torque, removing even the most stubborn bolts and fasteners. 4Mode drive control, will allow unmatched control in various fastening applications. 1 to 3 RPM allows for precision control, and auto shut off mode in the 4th setting will prevent over fastening of bolts while doing reassembly work. ***BATTERY AND CHARGER ARE NOT INCLUDED Features Most Compact. Greatest access in tight spaces at 5.1" in length. Up to 100 ft.-lbs. of nut-busting torque 4-Mode Drive control Auto-Shut Off mode reduces over fastening and increases productivity POWERSTATE™ Brushless Motor provides more power, more run-time, and longer life. REDLINK PLUS™ Electronic Intelligence enables advanced communication between your batteries and tools, allowing for unmatched levels of performance, protection, and productivity. REDLITHIUM™ batteries (not included) deliver more work per charge and more work over the life of the battery Technical Information Height: 6.75 Length: 5.1" Tool Warranty: 5 year Limited Warranty Voltage: 12V Weight: 1.64 lbs Width: 2.25 Power Source: Cordless Motor Type: Brushless LED Light: Yes IPM: 4300 RPM: 3200 Document Owner's Manual

Description The M12™ rivet tool is the first cordless solution that delivers fast, easy riveting while maintaining performance, durability, and size. The 255020 can pull up to 3/16 in. stainless steel rivets, 450 pcs. of 1/8 in. steel rivets on one 1.5 amp hour charge, and reduces muscle effort from a hand tool by over 60%. No compressors or hoses during set up and operation makes this tool a great replacement to pneumatic products. 2X longer life over current cordless solutions delivers greater durability from common jobsite conditions and use. This is the most compact cordless rivet tool on the market, measuring only 6.5 in. in length allowing users more access in tight spaces. The M12 rivet tool is part of the M12 battery platform, offering 90+ solutions on one battery system. Features Pull Up to 3/16" Stainless Steel Rivets 450 1/8" Steel Rivets per charge Part of 90+ Solutions on the M12 Platform Pull 3/32", 1/8", 5/32", 3/16" Rivets Aluminum, Steel, Stainless Steel - Capacity 0.8" Stroke Length 2,000 lbs. pulls force Tool holds rivet in any orientation Ergonomically designed for force reduction Technical Information Height: 10.75" Length: 6.50" Weight: 4.15 lbs Width: 2.63" Power Source: Cordless Nose Reach: 1.55" Type Of Rivets Used: 3/32"-3/16" All Material Nose Piece Sizes: 3/32", 1/8", 5/32", 3/16" Battery System: M12 Document Owner's Manual

Description The M12™ rivet tool is the first cordless solution that delivers fast, easy riveting while maintaining performance, durability, and size. The 2550-20 can pull up to 3/16 in. stainless steel rivets, 450 pcs. of 1/8 in. steel rivets on one 1.5 amp hour charge, and reduces muscle effort from a hand tool by over 60%. No compressors or hoses during set up and operation makes this tool a great replacement to pneumatic products. 2X longer life over current cordless solutions delivers greater durability from common jobsite conditions and use. This is the most compact cordless rivet tool on the market, measuring only 6.5 in. in length allowing users more access in tight spaces. The M12 rivet tool is part of the M12 battery platform, offering 90+ solutions on one battery system. ***BATTERY AND CHARGER ARE NOT INCLUDED Features Pull Up to 3/16" Stainless Steel Rivets 450 1/8" Steel Rivets per charge Part of 90+ Solutions on the M12 Platform Pull 3/32", 1/8", 5/32", 3/16" Rivets Aluminum, Steel, Stainless Steel - Capacity 0.8" Stroke Length 2,000 lbs. pulls force Tool holds rivet in any orientation Ergonomically designed for force reduction Technical Information Height: 10.75" Length: 6.50" Weight: 4.15 lbs Width: 2.63" Power Source: Cordless Nose Reach: 1.55" Type Of Rivets Used: 3/32"-3/16" All Material Nose Piece Sizes: 3/32", 1/8", 5/32", 3/16" Battery System: M12 Document Owner's Manual

Description The MILWAUKEE® M12™ 23 Gauge Pin Nailer Kit features the most compact cordless pin nailer, combining precision and power to deliver the performance that professional carpenters and remodelers demand, without the hassle of a compressor hose or gas cartridge. The 23 gauge pin nailer provides unmatched productivity and accessibility into tight spaces and confined corners with a lightweight, ergonomic design. The nitrogen air spring mechanism allows the nailer to consistently sink pin nails at proper depth into hard or softwoods while leaving small, clean nail holes. The double action trigger and nonmarring precision point tip allow for sequential driving and accurate pin placement into delicate trim pieces. The dryfire lockout feature prevents misfires and workpiece damage. The M12™ Pin Nailer drives 23gauge headless pin nails ranging in length from 1/2” to 13/8” and features all day run time with up to 750 pin nails per charge when paired with an M12™ REDLITHIUM™ CP1.5 battery pack. This battery powered pin nailer also features a magazine reload indicator, tool free drive depth adjustment, reversible belt clip, LED light, battery fuel gauge, secondary work contact tip, and carries an industry leading 3year limited power tool warranty. Features Double-Action Trigger for Sequential Driving No Compressor Hose or Gas Cartridge Compatible with 1/2" to 1-3/8" 23 Gauge Headless Pin Nails Up to 750 Pin Nails Per Charge Tool Free Drive Depth Adjustment (2) Interchangeable, Non-Marring, Precision Point Tips Included Magazine Reload Indicator and Dry Fire Lockout Mechanism LED Light for Increased Visibility Reversible Belt Clip Fits all M12™ Batteries Kit Includes (1) M12™ 23 Gauge Pin Nailer Kit (2540-21) (1) M12™ Lithium-ion Battery Charger (48-59-2401) (1) M12™ REDLITHIUM™ CP1.5 Battery Pack (48-11-2401) (1) Contractor Bag Technical Information Height 7.7 in Length 8.7 in Weight 3.3 lbs Width 2.6 in Power Source Cordless Magazine Capacity 120 Pin Nails Pin Length 1/2" to 1-3/8" Battery System M12 Document Owner's Manual

Description The MILWAUKEE® M12™ 23 Gauge Pin Nailer Kit features the most compact cordless pin nailer, combining precision and power to deliver the performance that professional carpenters and remodelers demand, without the hassle of a compressor hose or gas cartridge. The 23 gauge pin nailer provides unmatched productivity and accessibility into tight spaces and confined corners with a lightweight, ergonomic design. The nitrogen air spring mechanism allows the nailer to consistently sink pin nails at proper depth into hard or softwoods while leaving small, clean nail holes. The double action trigger and nonmarring precision point tip allow for sequential driving and accurate pin placement into delicate trim pieces. The dryfire lockout feature prevents misfires and workpiece damage. The M12™ Pin Nailer drives 23gauge headless pin nails ranging in length from 1/2” to 13/8” and features all day run time with up to 750 pin nails per charge when paired with an M12™ REDLITHIUM™ CP1.5 battery pack (NOT INCLUDED) . This battery powered pin nailer also features a magazine reload indicator, tool free drive depth adjustment, reversible belt clip, LED light, battery fuel gauge, secondary work contact tip, and carries an industry leading 3year limited power tool warranty. ***BATTERY AND CHARGER ARE NOT INCLUDED Features Double-Action Trigger for Sequential Driving No Compressor Hose or Gas Cartridge Compatible with 1/2" to 1-3/8" 23 Gauge Headless Pin Nails Up to 750 Pin Nails Per Charge Tool Free Drive Depth Adjustment (2) Interchangeable, Non-Marring, Precision Point Tips Included Magazine Reload Indicator and Dry Fire Lockout Mechanism LED Light for Increased Visibility Reversible Belt Clip Fits all M12™ Batteries (NOT INCLUDED) Technical Information Height 7.7 in Length 8.7 in Weight 3.3 lbs Width 2.6 in Power Source Cordless Magazine Capacity 120 Pin Nails Pin Length 1/2" to 1-3/8" Battery System M12 Document Owner's Manual

Description The MILWAUKEE® M12 FUEL™ Oscillating Multi-Tool Kit generates the fastest 12V cut speed, lowest full tool vibration, and delivers tool free blade change for faster accessory changes and no misplaced tools. The POWERSTATE™ Brushless Motor delivers 10,000 to 20,000 OPM while maintaining its speed under load better than the competition to provide the fastest cuts of any 12V competitor. The vibration isolating tool design minimizes vibration making cuts more comfortable with less fatigue. REDLINK PLUS™ Intelligence ensures unmatched levels of performance, protection, and compatibility. The M12™ REDLITHIUM™ XC4.0 battery delivers most work of any 12V battery on the market. The M12 FUEL™ Oscillating Multi-Tool has a 12 Setting Dial allowing users to adjust the speed to the application, and an integrated LED light for maximum visibility. Features POWERSTATE™ Brushless Motor: Purposely built for the M12 FUEL™ Oscillating Multi-Tool combined with 10,000 to 20,000 OPM provides the fastest speed of cut on a 12V Platform REDLINK PLUS™ Intelligence: Most advanced system of electronics in the industry, enabling communication between batteries and tools, allowing for unmatched levels of performance, protection, and compatibility. REDLITHIUM™ Battery Pack: Superior pack construction, electronics, and performance deliver more work per charge and more work over pack lifespan than any battery on the market. Tool Free Blade Change for Faster Accessory Changes Variable Speed Dial to Allow Users to Adjust the Speed to the Application LED Light for better Visibility in Low-Light Situations Oscillation Angle: 3.9 Degrees for Faster Cutting Vibration Dampening Technology for Lowest Full Tool Vibration Compatible with all M12™ Batteries Kit Includes (1) M12 FUEL™ Oscillating Multi-Tool (2526-20) (1) M12™ REDLITHIUM™ XC 4.0 Extended Capacity Battery Pack (48-11-2440) (1) M12™ Lithium-ion Battery Charger (48-59-2401) (1) OPEN-LOK™ 1-3/8" HCS WOOD BLADE 1PK (49-25-1101) (1) Multi-Tool Sanding Pad (48-90-2000) (1) 3-1/2" 60 Grit Triangle Sandpaper (1) 3-1/2" 80 Grit Triangle Sandpaper (2) 3-1/2" 120 Grit Triangle Sandpaper (1) 3-1/2" 240 Grit Triangle Sandpaper Document Owner's Manual

Description The MILWAUKEE® M12 FUEL™ Oscillating Multi Tool generates the fastest 12V cut speed, lowest full tool vibration, and delivers tool free blade change for faster accessory changes and no misplaced tools. The POWERSTATE™ Brushless Motor delivers 10,000 to 20,000 OPM while maintaining its speed under load better than the competition to provide the fastest cuts of any 12V competitor. The vibration isolating tool design minimizes vibration making cuts more comfortable with less fatigue. REDLINK PLUS™ Intelligence ensures unmatched levels of performance, protection, and compatibility. The M12™ REDLITHIUM™ XC4.0 battery (not included) delivers most work of any 12V battery on the market. The M12 FUEL™ Oscillating Multi Tool has a 12Setting Dial allowing users to adjust the speed to the application, and an integrated LED light for maximum visibility. Features POWERSTATE™ Brushless Motor: Purposely built for the M12 FUEL™ Oscillating Multi-Tool combined with 10,000 to 20,000 OPM provides the fastest speed of cut on a 12V Platform REDLINK PLUS™ Intelligence: Most advanced system of electronics in the industry, enabling communication between batteries and tools, allowing for unmatched levels of performance, protection, and compatibility. REDLITHIUM™ Battery Pack (NOT INCLUDED) : Superior pack construction, electronics, and performance deliver more work per charge and more work over pack lifespan than any battery on the market. Tool Free Blade Change for Faster Accessory Changes Variable Speed Dial to Allow Users to Adjust the Speed to the Application LED Light for better Visibility in Low-Light Situations Oscillation Angle: 3.9 Degrees for Faster Cutting Vibration Dampening Technology for Lowest Full Tool Vibration Compatible with all M12™ Batteries (NOT INCLUDED) Kit Includes (1) M12 FUEL™ Oscillating Multi-Tool (2526-20) (1) OPEN-LOK™ 1-3/8" HCS WOOD BLADE 1PK (49-25-1101) (1) Multi-Tool Sanding Pad (48-90-2000) (1) 3-1/2" 60 Grit Triangle Sandpaper (1) 3-1/2" 80 Grit Triangle Sandpaper (2) 3-1/2" 120 Grit Triangle Sandpaper (1) 3-1/2" 240 Grit Triangle Sandpaper Document Owner's Manual

Description The M12 FUEL™ HACKZALL® is the fastest cutting and most powerful saw in its class, delivering over 4X more runtime, up to 70% faster cutting, and up to 6X longer tool life than competitive saws. The compact, one-handed design provides superior control and the ability to make cuts in tight spaces. Its’ light weight design is optimal for overhead cutting applications. The POWERSTATE™ Brushless Motor outperforms all leading competitors with constant power output, yet runs cooler with no wearable components. REDLINK PLUS™ Intelligence ensures optimized performance and protects your investment from overload, overheating, and over-discharge. The M12™ REDLITHIUM™ XC4.0 Battery Pack provides more work per charge and more work over the life of the pack than competitive batteries. The dual gear counter balance mechanism significantly reduces vibration, providing faster starts in metal and reduced user fatigue. Features One-handed design provides superior control & versatility over a standard recip saw Compact size allows for cutting in tight spaces, and light weight makes overhead work easier POWERSTATE™ Brushless Motor supplies constant power for faster cuts and reduced heat for extended life REDLINK PLUS™ Intelligence provides optimized performance and overload protection using total system communication between tool, battery and charger REDLITHIUM™ XC 4.0 Battery Pack provides superior pack construction, more work per charge and more work over the life of the pack than competitive batteries Kit Includes (1) M12 FUEL™ HACKZALL® Recip Saw (2520-20) (1) M12™ REDLITHIUM™ XC 4.0 Extended Capacity Battery Pack (48-11-2440) (1) M12™ Lithium-ion Battery Charger (48-59-2401) Technical Information Length: 11.0" Tool Warranty: 5 Years Voltage: 12V Weight: 3.2 lbs Power Source: Cordless Warranty: 5 Year Limited Warranty LED Light: Yes Stroke Length: 5/8" Keyless Blade Clamp: Yes (QUIK-LOK® Universal) SPM: 0-3,000 FUEL Gauge: Yes Battery System: M12 Document Owner's Manual

Description Our M12 FUEL™ installation drill/driver kit features 4 dedicated solutions, delivering unrivaled access and control with up to 300 in/lbs of max torque. Four dedicated heads, including a 3/8 in. chuck, offset driver, 1/4 in. hex, and right angle, can attach in 16 different positions. This provides you with a 4in1 drilling and driving solution that is purposefully designed to reach uniquely challenging locations. The compact drill driver features a slim tool profile and an inline grip in the back of the tool that provides ultimate tool control and unrivaled access. The top of the tool is flat, allowing the tool to be placed flush against surfaces for additional access when needed. The front of the tool is equipped with a magnetic bit holder that securely holds multiple bits, enhancing your productivity. These unique features combine with the tool’s compact size and weight allowing you to maneuver the multi-head drill/driver for maximum versatility and best access in hard to reach places. The modular drill/driver is equipped with a POWERSTATE™ brushless motor, delivering you with 1600 RPMS and 300 in./lbs of torque. This provides you with the necessary power for installation applications, especially in electrical, cabinet installation, MRO, HVAC, automotive, and remodel applications. The installation drill/driver features REDLINK Plus™ intelligence, protecting your tool from overloading or overheating. The compact cordless drill/driver is powered by our M12™ REDLITHIUM™ battery packs, delivering you with more runtime per charge and more work over the life of the pack. In addition to the 12 Volt tool and four attachments, a compartmentalized contractor bag is included to hold each individual head. This kit also includes two M12™ REDLITHIUM™ CP2.0 battery packs (48-1124-20) and an M12™ charger (48-5924-01). Features 4-in-1 Dedicated Solutions Unrivaled Access and Control Up to 300 in-lbs of max torque Offset Attachment provides ultimate access to tight corners and will not damage or mar finished materials when fastening Right Angle Attachment provides efficient fastening and/or drilling at 90 degrees for unrivaled access in tight spaces All Metal 3/8” Chuck and ¼” Hex attachments add to user productivity by delivering the versatility to efficiently perform most drilling & fastening applications Magnetic Bit Holder holds multiple bits on board to save time when switching accessories 5.12” wide and only 2.0lbs with battery attached Inline grip allows for maximum tool control and easier access to hard to reach places Top of tool is flat, allowing for easier drilling/fastening when tool is flush to a surface ¼” Hex, 3/8” Chuck, and Offset attachments connect to Right Angle attachment for added versatility when drilling and fastening at a right angle POWERSTATE™ Brushless Motor delivers 300 in-lbs of max torque Attachments connect in 16 different positions for access at almost every angle Belt Clip attached Compatible with all M12™ batteries Compartmentalized Contractor Bag allows for easy attachment organization and tool mobility Kit Includes (1) M12 FUEL™ Installation Drill/Driver(2505-20) (2) M12™ REDLITHIUM™ CP2.0 Battery(48-11-2420) (1) M12™ Lithium-ion Battery Charger (48-59-2401) (1) Right Angle Attachment (1) Offset Attachment (1) 3/8" Metal Chuck Attachment (1) 1/4" Hex Attachment (1) Compartmentalized Contractor Bag (1) Belt Clip Technical Information Height: 7" Length: 5.12" Weight: 2 lbs Width: 1.8" Power Source: Cordless Battery System: M12 Document Owner's Manual

Description Our M12 FUEL™ installation drill/driver kit features 4 dedicated solutions, delivering unrivaled access and control with up to 300 in/lbs of max torque. Four dedicated heads, including a 3/8 in. chuck, offset driver, 1/4 in. hex, and right angle, can attach in 16 different positions. This provides you with a 4in1 drilling and driving solution that is purposefully designed to reach uniquely challenging locations. The compact drill driver features a slim tool profile and an inline grip in the back of the tool that provides ultimate tool control and unrivaled access. The top of the tool is flat, allowing the tool to be placed flush against surfaces for additional access when needed. The front of the tool is equipped with a magnetic bit holder that securely holds multiple bits, enhancing your productivity. These unique features combine with the tool’s compact size and weight allowing you to maneuver the multi-head drill/driver for maximum versatility and best access in hard to reach places. The modular drill/driver is equipped with a POWERSTATE™ brushless motor, delivering you with 1600 RPMS and 300 in./lbs of torque. This provides you with the necessary power for installation applications, especially in electrical, cabinet installation, MRO, HVAC, automotive, and remodel applications. The installation drill/driver features REDLINK Plus™ intelligence, protecting your tool from overloading or overheating. The compact cordless drill/driver is powered by our M12™ REDLITHIUM™ battery packs, delivering you with more runtime per charge and more work over the life of the pack. In addition to the 12 Volt tool and four attachments, a compartmentalized contractor bag is included to hold each individual head. ***BATTERY AND CHARGER NOT INCLUDED Features 4-in-1 Dedicated Solutions Unrivaled Access and Control Up to 300 in-lbs of max torque Offset Attachment provides ultimate access to tight corners and will not damage or mar finished materials when fastening Right Angle Attachment provides efficient fastening and/or drilling at 90 degrees for unrivaled access in tight spaces All Metal 3/8” Chuck and ¼” Hex attachments add to user productivity by delivering the versatility to efficiently perform most drilling & fastening applications Magnetic Bit Holder holds multiple bits on board to save time when switching accessories 5.12” wide and only 2.0lbs with battery attached Inline grip allows for maximum tool control and easier access to hard to reach places Top of tool is flat, allowing for easier drilling/fastening when tool is flush to a surface ¼” Hex, 3/8” Chuck, and Offset attachments connect to Right Angle attachment for added versatility when drilling and fastening at a right angle POWERSTATE™ Brushless Motor delivers 300 in-lbs of max torque Attachments connect in 16 different positions for access at almost every angle Belt Clip attached Compatible with all M12™ batteries (NOT INCLUDED) Compartmentalized Contractor Bag allows for easy attachment organization and tool mobility Kit Includes (1) M12 FUEL™ Installation Drill/Driver(2505-20) (1) Right Angle Attachment (1) Offset Attachment (1) 3/8" Metal Chuck Attachment (1) 1/4" Hex Attachment (1) Compartmentalized Contractor Bag (1) Belt Clip ***BATTERY AND CHARGER NOT INCLUDED Technical Information Height: 7" Length: 5.12" Weight: 2 lbs Width: 1.8" Power Source: Cordless Battery System: M12 Document Owner's Manual

Description The (2498-24) M12™ cordless REDLITHIUM™ 4 tool Combo kit includes the 3/8 in. drill driver (2410-20), 1/4 in. hex impact driver (2450-20), Hackzall® reciprocating saw (2420-20), and work light (49-2401-45). The innovative M12™ cordless system is designed to deliver the power and torque required for professional applications, in a size that reaches the tightest and toughest places. Powered by REDLITHIUM™, the M12™ cordless lithium-ion system offers unmatched power, speed, and tool belt portability. Kit Includes (1) M12™ 3/8” Drill/Driver (Tool Only) (2407-20) (1) M12™ HACKZALL® Recip Saw (Tool Only) (2420-20) (1) M12™ ¼” Hex Impact Driver (Tool Only) (2462-20) (1) M12™ REDLITHIUM™ CP1.5 Battery Pack (48-11-2401) (1) M12™ Lithium-ion Battery Charger (48-59-2401)

Description The 2497-22 M12 cordless 2tool Combo kit includes the M12 3/8 in. Hammer drill/driver and the M12 1/4 in. Hex impact driver (2450-20). The innovative M12 cordless system is designed to deliver the power and torque required for professional applications, in a size that reaches the tightest and toughest places. Powered by Red Lithium, the M12 cordless system offers unmatched power, speed, and tool belt portability. Each tool in the Milwaukee 2497-22 kit has a built-in power gauge that indicates the remaining charge in its lithium-ion battery, which charges in as little as 30 minutes on the included charger. These tools also come with a carrying case for added convenience. Cordless tools powered by Red Lithium batteries deliver more torque, more power, and longer runtime than the competition. Kit Includes (1) M12™ 3/8” Hammer Drill/Driver(2408-20) (1) M12™ ¼” Hex Impact Driver(2462-20) (2) M12™ REDLITHIUM™ CP1.5 Battery Pack(48-11-2401) (1) M12™ Lithium-ion Battery Charger (48-59-2401) (2) Belt Clip (1) Contractor Bag

Description The MILWAUKEE® M12 FUEL™ 1/4" Straight Die Grinder Kit is designed to replace pneumatic die grinders. The die grinder provides users with up to .3 HP performance to outperform pneumatic die grinders by 20%. The M12™ inline die grinder features 3Mode RPM control and a responsive variable speed trigger providing users with unmatched control with their most common accessories. The cordless die grinder gives users greater access and mobility, eliminating the frustrations of hoses and compressors. In addition to the tool, this kit includes two M12™ REDLITHIUM™ 2.0 batteries. Features 20% More Power Than Pneumatic 0.3 HP Motor Output 3-MODE SPEED CONTROL Greater Mobility and Access Optimum performance with 2" Accessories POWERSTATE™ Brushless Motor Technology M12 REDLITHIUM™ Battery Technology Part of the M12™ System Kit Includes (1) M12 FUEL™ 1/4" Straight Die Grinder (2486-20) (2) M12™ REDLITHIUM™ CP2.0 Battery (48-11-2420) (1) M12™ Lithium-ion Battery Charger (48-59-2401) (1) Carrying Case (2) Wrench Technical Information Height: 10.1" Length: 2.2" Weight: 1.2 lbs Width: 1.9" Power Source: Cordless Battery System: M12

Description The M12 FUEL™ right angle die grinder is the first cordless right angle die grinder that delivers the size and performance professional service mechanics demand. This tool offers up to .3 HP performance, best-in-class size to help fit in tight places, and offers greater mobility and access. A 4mode RPM control and responsive variable speed trigger allow users unmatched control. ***BATTERY AND CHARGER NOT INCLUDED Features 20% More Power Than Pneumatic 0.3 HP Motor Output 4-MODE SPEED CONTROL Greater Mobility and Access Optimum performance with 2" Accessories POWERSTATE™ Brushless Motor Technology M12 REDLITHIUM™ Battery Technology (NOT INCLUDED) Part of the M12™ System Technical Information Height: 7.9” Length: 4.5” Tool Warranty: 5 Year Limited Warranty Weight: 1.2 lbs Width: 2" Power Source: Cordless Motor Type: Brushless Collet Size: ¼” RPM: 0 – 24,500 Power Output: 0.3 HP Battery System: M12 Document Owner's Manual

Description Fastest cordless tire Inflator. The Milwaukee® M12™ compact Inflator delivers fast, accurate, easy inflation with the portability to take anywhere. The Inflator has the capability to complete demanding applications like car, LT truck, and compact equipment tires, the M12™ compact Inflator gives users ultimate power and efficiency. Rated to deliver over 120PSI, the high efficiency motor and pump top off car tires in under 1 minute. The TrueFill™ auto shutoff technology delivers highly accurate pressure, protects from overfill, and automatically senses speed of fill to deliver precise shutoff at the desired PSI. Additionally, the unit includes a large easy to read backlit LCD, antivibration feet, and 26 in. hose with an all brass Schrader chuck. Features Fastest Cordless Tire Inflator: Top-off a car tire in under 1 minute. (28 - 35 PSI) Inflates car, LT truck, and compact equipment tires. REDLINK™ Intelligence: TrueFill™ Auto Shut-off technology increases accuracy, protects from over-temp and over-fill. High efficiency pump and motor for true 120 PSI capability. Illuminated digital gauge with target and current pressure reading. Fills a LT truck tire in under 4 minutes (30-45 psi). Compact, portable, and easy-to-store in any car or truck. Weather and impact resistant with a reinforced cage. Anti-vibration feet for no tool movement while running. 3-year limited warranty. Kit Includes (1) M12™ Compact Inflator (2475-20) (1) M12™ REDLITHIUM™ XC 4.0 Extended Capacity Battery Pack (48-11-2440) (1) M12™ Lithium-ion Battery Charger (48-59-2401) (1) Ball Inflation Needle (1) Presta Chuck (1) Schrader Chuck (1) Inflator Nozzle Technical Information Height: 7.50" Length: 6.50" Weight: 3.83" Width: 6.50 lbs Power Source: Cordless 0 88 CFM: 0 PSI 0 63 CFM: 35 PSI PSI Rating: 0 -120 PSI Hose Length: 26" Gauge Accuracy: +/- 3% Duty Cycle: 50% Battery System: M12 Document Owner's Manual

Description Fastest cordless tire Inflator. The Milwaukee® M12™ compact Inflator delivers fast, accurate, easy inflation with the portability to take anywhere. The Inflator has the capability to complete demanding applications like car, LT truck, and compact equipment tires, the M12™ compact Inflator gives users ultimate power and efficiency. Rated to deliver over 120PSI, the high efficiency motor and pump top off car tires in under 1 minute. The TrueFill™ auto shutoff technology delivers highly accurate pressure, protects from overfill, and automatically senses speed of fill to deliver precise shutoff at the desired PSI. Additionally, the unit includes a large easy to read backlit LCD, antivibration feet, and 26 in. hose with an all brass Schrader chuck. ***BATTERY AND CHARGER ARE NOT INCLUDED Features Fastest Cordless Tire Inflator: Top-off a car tire in under 1 minute. (28 - 35 PSI) Inflates car, LT truck, and compact equipment tires. REDLINK™ Intelligence: TrueFill™ Auto Shut-off technology increases accuracy, protects from over-temp and over-fill. High efficiency pump and motor for true 120 PSI capability. Illuminated digital gauge with target and current pressure reading. Fills a LT truck tire in under 4 minutes (30-45 psi). Compact, portable, and easy-to-store in any car or truck. Weather and impact resistant with a reinforced cage. Anti-vibration feet for no tool movement while running. 3-year limited warranty. Kit Includes (1) M12™ Compact Inflator (2475-20) (1) Ball Inflation Needle (1) Presta Chuck (1) Schrader Chuck (1) Inflator Nozzle Technical Information Height: 7.50" Length: 6.50" Weight: 3.83" Width: 6.50 lbs Power Source: Cordless 0 88 CFM: 0 PSI 0 63 CFM: 35 PSI PSI Rating: 0 -120 PSI Hose Length: 26" Gauge Accuracy: +/- 3% Duty Cycle: 50% Battery System: M12 Document Owner's Manual

Description The industry’s first cordless lithium-ion copper tubing cutter cuts up to 10X faster than conventional cutters. Engineered with plumbers, mechanical contractors and remodelers in mind, this versatile copper tubing cutter runs at 500 RPM for unmatched cutting speed. The M12TM lithium-ion battery and ultra-efficient gearing allow you to make up to 200 cuts on a single charge. The patent-pending cutting mechanism automatically adjusts diameter to cut type K, L and M copper pipes from 3/8 in. to 1 in. (outside diameter from 1/2 in. to 11/8 in.). The unique rotating cutting head cuts installed copper piping with as little as 11/2 in. clearance, and the lightweight, inline design provides a longer reach and reduces wrist strain when you’re working in confined spaces. A built-in LED light illuminates the cutting surface. The metal cutting head is corrosion and rust resistant, and sealed for water protection, while electronic overload protection and unibody construction provide additional durability. An Onboard, real-time battery fuel gauge helps you monitor the charge precisely, so there’s less downtime on the job. The kit includes one 12 Volt lithium-ion battery, a 30minute charger and carrying case. Features Cutting mechanism automatically adjusts diameter to cut Type K, L and M copper pipes from 3/8” to 1” Produces more than 200 cuts in a single charge Cuts copper tubing with as little as 1-1/2" of clearance Powerful 500-RPM motor: Cuts up to 10X faster than conventional cutters Metal Cutting Head is corrosion and rust resistant and sealed for water protection Electronic Overload Protection along with uni-body construction for increased durability Inline Design reduces wrist drain in confined spaces Built-in LED light illuminates the lie of cut for better visibility 5 Year Tool Warranty Kit Includes (1) M12™ Copper Tubing Cutter (Tool Only) (2471-20) (1) M12™ Lithium-ion Battery Charger (48-59-2401) (1) M12™ REDLITHIUM™ CP1.5 Battery Pack (48-11-2401) (1) Carrying Case Technical Information Length: 14" Tool Warranty: 5 Years Voltage: 12V Weight: 2.8 lbs Power Source: Cordless Warranty: 5 Year Limited Warranty Speed: 500 RPM Capacity: 1/2" to 1-1/8" OD Blade: Copper Cutting Wheel Battery System: M12 Document Owner's Manual

Description Milwaukee Tool Corporation introduces the industry's first M12™ cordless lithium-ion copper tubing cutter, specifically designed for cutting copper with the speed and versatility that plumbers, mechanical contractors and remodelers require. With a 12 V lithium-ion battery and ultra efficient gearing, the 247120 performs up to 200 cuts on a single charge. A close quarters rotating head cuts installed copper tubing with as little as 11/2 in. of clearance. At 500 RPM, the patent pending cutting mechanism cuts copper tubing up to 10X faster than conventional cutters and automatically adjusts diameter to cut through 3/8 in. to 1 in. copper tubing (1/2 in. to 11/8 in. outer diameter type K, L, and M). The inline design offers greater reach and reduced wrist strain in confined spaces. The metal cutting head is corrosion and rust resistant and is sealed for protection from water. Electronic overload protection and unibody construction provide exceptional durability. ***BATTERY AND CHARGER ARE NOT INCLUDED Features Cutting mechanism automatically adjusts diameter to cut Type K, L and M copper pipes from 3/8” to 1” Produces more than 200 cuts in a single charge Cuts copper tubing with as little as 1-1/2" of clearance Powerful 500-RPM motor: Cuts up to 10X faster than conventional cutters Metal Cutting Head is corrosion and rust resistant and sealed for water protection Electronic Overload Protection along with uni-body construction for increased durability Inline Design reduces wrist drain in confined spaces Built-in LED light illuminates the lie of cut for better visibility 5 Year Tool Warranty Technical Information Length: 14" Tool Warranty: 5 Years Voltage: 12V Weight: 2.8 lbs Power Source: Cordless Warranty: 5 Year Limited Warranty Speed: 500 RPM Capacity: 1/2" to 1-1/8" OD Blade: Copper Cutting Wheel Battery System: M12 Document Owner's Manual

Description Cutting faster, cleaner and closer than traditional methods, the new M12™ cordless lithium-ion PVC shear utilizes a super sharp stainless steel blade for burr free cuts, slices through 2 in. PVC in as fast as 3 seconds, and offers an offset blade to cut PVC mounted to a stud or close to a wall. Powered by the Milwaukee® M12™ Red Lithium™ battery, the new PVC shear is able to cut over 200 times on a single charge. Features Slices through 2" schedule 80 PVC in just 3 seconds Produces more than 200 cuts in a single charge Ultra Sharp Pierce-Point delivers burr-free cuts Quick Blade Return: Increases productivity in repetitive cuts Stainless Steel Blade and Aluminum Jaw: Impact, water and rust resistant Offset Blade Optimized for cutting installed pipe closer than traditional shears Variable Speed Trigger for controlled cuts in warm and cold weather Cuts PVC, CPVC, PEX Tubing, BlazeMaster®, ABS, Non-Metallic Conduit, Rubber Hose, and more 5 Year Tool Warranty Kit Includes (1) M12™ Plastic Pipe Shear (Tool Only) (2470-20) (1) M12™ Lithium-ion Battery Charger (48-59-2401) (1) M12™ REDLITHIUM™ CP1.5 Battery Pack (48-11-2401) (1) Carrying Case Technical Information Length: 14-3/8" Tool Warranty: 5 Years Voltage: 12V Weight: 4.3 lbs Power Source: Cordless Warranty: 5 Year Limited Warranty Battery: Lithium-Ion Charger: 12V charger Switch Type: Two-Action Variable Speed with Reverse Torque: 1,900 in-lbs Capacity: 2" Schedule 80 PVC Blade: 3mm Reinforced Stainless Steel Material: PVC, CPVC, ABS, BlazeMaster®, PEX Tubing, Non-Metallic Conduit, Rubber Hose Battery System: M12 Document Owner's Manual

Description Cutting faster, cleaner and closer than traditional methods, the new M12™ cordless lithium-ion PVC shear utilizes a super sharp stainless steel blade for burr free cuts, slices through 2 in. PVC in as fast as 3 seconds, and offers an offset blade to cut PVC mounted to a stud or close to a wall. Powered by the Milwaukee® M12™ Red Lithium™ battery, the new PVC shear is able to cut over 200 times on a single charge. ***BATTERY AND CHARGER ARE NOT INCLUDED Features Slices through 2" schedule 80 PVC in just 3 seconds Produces more than 200 cuts in a single charge Ultra Sharp Pierce-Point delivers burr-free cuts Quick Blade Return: Increases productivity in repetitive cuts Stainless Steel Blade and Aluminum Jaw: Impact, water and rust resistant Offset Blade Optimized for cutting installed pipe closer than traditional shears Variable Speed Trigger for controlled cuts in warm and cold weather Cuts PVC, CPVC, PEX Tubing, BlazeMaster®, ABS, Non-Metallic Conduit, Rubber Hose, and more 5 Year Tool Warranty Technical Information Length: 14-3/8" Tool Warranty: 5 Years Voltage: 12V Weight: 4.3 lbs Power Source: Cordless Warranty: 5 Year Limited Warranty Switch Type: Two-Action Variable Speed with Reverse Torque: 1,900 in-lbs Capacity: 2" Schedule 80 PVC Blade: 3mm Reinforced Stainless Steel Material: PVC, CPVC, ABS, BlazeMaster®, PEX Tubing, Non-Metallic Conduit, Rubber Hose Battery System: M12 Document Owner's Manual

Description It drives faster in tighter spaces, than any other 12 V right angle impact driver on the market. With a 1.4 in. head diameter, and the ability to use with most 1 in. insert bits, the M12™ 1/4 in. hex right angle impact driver offers users maximum access for hard-to-reach fasteners. The tool provides the most power and highest RPM in its class, and is optimized to run at full speed throughout the toughest applications. Variable speed with an extended paddle switch provides tradesmen maximum control, and the ability to operate their tool from multiple grip positions. ***BATTERY AND CHARGER ARE NOT INCLUDED Features Offers users maximum access for hard-to-reach fasteners Provides the most power and highest RPM in its class Part of the M12 System, featuring over 70 tools Best-in-class power and speed with 600 in. lbs. of torque and 0 - 2,150 RPM Variable speeds provides maximum control for any job Extended paddle switch for multiple grip positions Technical Information Length: 11.3" Voltage: 12V Weight: 2.173 lbs Power Source: Cordless Warranty: 5 Year Limited Warranty Battery: Lithium-Ion (NOT INCLUDED) Charger: 12V charger (NOT INCLUDED) No Load RPM: 0-2,450 No Load IPM: 0-3,300 Torque: 600 in-lbs Drive Size: 1/4" Hex Battery System: M12 Document Owner's Manual

Description The M12 FUEL™ 1/2 in. Digital torque wrench with ONEKEY™ is the industry's first torque wrench with a motor, delivering increased productivity, precise torque accuracy, and user demanded reporting functionality. This tool delivers 50% faster installation time, replacing the hand tool or two tool installation process and providing more control to reduce the over torquing of fasteners. The 1/2 in. digital torque wrench provides 12.5150ftlbs of torque range and accuracy within 2% of full scale for torque critical fasteners. This battery powered torque wrench is equipped with Milwaukee ONEKEY™ giving you the power to track, report, and manage your tool. This tool will record all of the fasteners that are saved and produce a downloadable report via ONEKEY™ for the necessary parties requiring the data. ONEKEY™ allows you to wirelessly connect to a smart phone to customize the tool settings, track its location, manage inventory, and lock the tool out for added security and protection for your investment. **BATTERY NOT INCLUDED** Features Delivers up to 50% Faster installation by replacing the hand tool or two tool installation process with the POWERSTATE™ brushless motor and torque wrench in one tool Precise Torque Accuracy of up to ±2% CW, ±3% CCW of full scale for torque critical fasteners Faster, More Productive Torque Reporting w/ ONE-KEY™ providing torque data and customizable reports for inspectors or owners ONE-KEY™ technology allows for customization, tracking, tool security, and inventory management Adjustable run-down torque to control the tools output torque via the motor to prevent over torque REDLINK PLUS™ Electronic Intelligence enables advanced communication between batteries and tools for unmatched performance, protection, and productivity. REDLITHIUM™ batteries deliver more work per charge and more work over the life of the battery (NOT INCLUDED) Four notification modes that the tool is reaching, meeting or exceeding the torque target (audible, LED, LCD, and vibratory) Four measurement modes (ft-lb, in-lb, Nm, Kgcm) Six pre-programmed languages including English, Spanish and French Durable design to withstand the most demanding jobsite environments Compatible with all M12™ batteries & chargers (NOT INCLUDED) Certificate of tool calibration is valid for 12 months from the date of first use Technical Information Length: 23.5" Tool Warranty: 5 years Weight: 5.7 lbs Power Source: Cordless Torque Range: 12.5 – 150 ft-lbs Tool Accuracy: CW: +/-2% of Full Scale/ CCW: +/-3% of Full Scale (Range: 20% - 100% of Full Scale) Ratcheting Angle: 4.5° Anvil Size: ½” Ball Detent RPM: 0 – 100 Available Presets: 15 Data Storage Capacity: 28,500 Events Calibration: 1 Year or 5,000 Cycles Measuring Units: ft-lbs, in-lbs, Nm, kg-cm Torque Notifications: LED Lights, LCD Screen, Sound, Handle Vibration Battery System: M12 (NOT INCLUDED) Document Owner's Manual

Description The M12 FUEL™ 3/8 in. Digital torque wrench with ONEKEY™ is the industry's first torque wrench with a motor, delivering increased productivity, precise torque accuracy, and user demanded reporting functionality. This tool delivers 50% faster installation time, replacing the hand tool or two tool installation process and providing more control to reduce the over torquing of fasteners. The 3/8 in. digital torque wrench provides 10 100ftlbs of torque range and accuracy within 2% of full scale for torque critical fasteners. This battery powered torque wrench is equipped with Milwaukee ONEKEY™ giving you the power to track, report, and manage your tool. This tool will record all of the fasteners that are saved and produce a downloadable report via ONEKEY™ for the necessary parties requiring the data. ONEKEY™ allows you to wirelessly connect to a smart phone to customize the tool settings, track its location, manage inventory, and lock the tool out for added security and protection for your investment. ***BATTERY AND CHARGER NOT INCLUDED Features Delivers up to 50% Faster installation by replacing the hand tool or two tool installation process with the POWERSTATE™ brushless motor and torque wrench in one tool Precise Torque Accuracy of up to ±2% CW, ±3% CCW of full scale for torque critical fasteners Faster, More Productive Torque Reporting w/ ONE-KEY™ providing torque data and customizable reports for inspectors or owners ONE-KEY™ technology allows for customization, tracking, tool security, and inventory management Adjustable run-down torque to control the tools output torque via the motor to prevent over torque REDLINK PLUS™ Electronic Intelligence enables advanced communication between batteries and tools for unmatched performance, protection, and productivity. REDLITHIUM™ batteries deliver more work per charge and more work over the life of the battery (NOT INCLUDED) Four notification modes that the tool is reaching, meeting or exceeding the torque target (audible, LED, LCD, and vibratory) Four measurement modes (ft-lb, in-lb, Nm, Kgcm) Six pre-programmed languages including English, Spanish and French Durable design to withstand the most demanding jobsite environments Compatible with all M12™ batteries & chargers Certificate of tool calibration is valid for 12 months from the date of first Technical Information Length: 23.3" Tool Warranty: 5 years Weight: 5.5 lbs Power Source: Cordless Torque Range: 10-100 ft-lbs Tool Accuracy: CW: +/-2% of Full Scale/ CCW: +/-3% of Full Scale (Range: 20% - 100% of Full Scale) Ratcheting Angle: 4.5° Anvil Size: 3/8” Ball Detent RPM: 0 – 100 Available Presets: 15 Data Storage Capacity: 28,500 Events Calibration: 1 Year or 5,000 Cycles Measuring Units: ft-lbs, in-lbs, Nm, kg-cm Torque Notifications: LED Lights, LCD Screen, Sound, Handle Vibration

Description Milwaukee Electric Tool has developed a new breed of rotary tool by leveraging its heritage in straight and die grinders. The M12™ cordless lithium-ion rotary tool utilizes a powerful 12 V motor and Milwaukee's REDLITHIUM™ battery technology to produce unmatched performance and increased runtime. The size and versatility of the M12™ cordless lithium-ion rotary tool make it an indispensable tool for maintenance contractors, electricians, plumbers, remodelers and more. The tool runs from 5,00032, 000 RPM and is managed by a variable speed dial for fluid control. The collet is completely compatible with all 1/32 in. to 1/8 in. shank accessories providing the user access to thousands of cutting, grinding, sanding and polishing solutions. Battery and charger not included Features Powerful 12-volt motor: Delivers 5,000-32,000 RPM for superior speed and performance under load Unique Milwaukee design: Delivers up to 10X the tool life with grinder-style exhaust ports and front bearing protection Variable-speed dial: Offers fluid control 1/8” Collet: Accommodates all 1/32” - 1/8” shank accessories for thousands of applications Compact, lightweight design: Allows you to work comfortably in tight spaces and all day Technical Information Length: 9" Tool Warranty: 5 Years Voltage: 12V Weight: 0.9 lbs Power Source: Cordless Warranty: 5 Year Limited Warranty No Load RPM: 5,000-32,000 Charge Time: 30 Minutes Battery System: M12 (NOT INCLUDED)

Description Choose the subcompact ratchet with best-in-class power, speed and durability. The M12™ cordless 3/8 in. lithium-ion ratchet is the ideal tool for auto mechanics, maintenance and repair professionals looking for maximum performance and productivity in a subcompact cordless tool. It utilizes a powerful 12 Volt motor to produce up to 35 ft-lbs of torque and 250 RPM, giving users the power and speed of a pneumatic ratchet without the AirGrip. It’s powered by the M12 REDLITHIUM™ battery pack , which delivers more work per charge and more work over pack life than the competitors, as well as best-in-class performance in extreme jobsite conditions. At just 103/4 in. long and 1.9 lbs, the ratchet is toolbelt portable, and features a 3/4 in. low-profile head design for work in the tightest of spaces and engine bays. The variable speed metal trigger and reinforced steel housing provide maximum control and durability with any application. The kit includes one M12 battery, a 30minute charger, a 3/8 in. to 1/4 in. adapter and carrying case. Features Powerful 12-volt motor: Delivers up to 35 ft-lbs of torque Superior fastening speed: Produces 250 RPM, with variable-speed trigger for greater control REDLITHIUM™ Battery Technology: Superior pack construction, electronics, and performance deliver more work per charge and more work over pack life than any battery on the market REDLINK™ Intelligence: Provides optimized performance and overload protection using total system communication between tool, battery and charger On-board fuel gauge: Helps you monitor the charge precisely for less downtime on the job Built-in LED light: Illuminates work surfaces in dark locations Kit Includes (1) M12™ Cordless 3/8" Ratchet (Tool Only) (2457-20) (1) M12™ REDLITHIUM™ CP1.5 Battery Pack (48-11-2401) (1) M12™ Lithium-ion Battery Charger (48-59-2401) Technical Information Length: 10-3/4" Voltage: 12V Width: 3/4" Head Power Source: Cordless Warranty: 5 Year Limited Warranty Peak Torque: 35 ft-lbs No Load Speed: 0-250 RPM Battery System: M12 Document Owner's Manual

Description The Milwaukee M12™ 3/8 in. crown stapler delivers a true hand tool replacement. The 2447 is designed to drive a range of 3/8 in. flat crown staples (1/4 in. – 9/16 in.) through an array of materials and substrates. At just 3.0 lbs. and 7.5 in. long the compact design allows for great access into tight spaces and convenient tool belt portability. An easy to squeeze trigger design significantly reduces fatigue associated with traditional hand staplers. Integrated sequential and contact actuation trigger design provides increased productivity and seamless changing between firing modes. The 2447 is compatible with all Milwaukee M12™ batteries (NOT INCLUDED) , and carries Milwaukee's 5year limited power tool warranty. ***BATTERY AND CHARGER ARE NOT INCLUDED Features Fastens a range of 3/8" flat crown staples from 1/4" - 9/16" Compact and ergonomic design significantly reduces user fatigue Contact actuation for increase productivity Dry fire lockout prevents unintended damage to the work surface Staple leg locating arrow for accurate staple placement Slotted magazine design for easy staple viewing Integrated sequential and contact actuation trigger for easy changing between firing modes Power adjustment dial for consistent flush stapling through various materials Up to 1500 staples per charge on an M12™ REDLITHIUM™ 1.5ah battery (NOT INCLUDED) Compatible with all M12™ batteries (NOT INCLUDED) Adjustable belt hook 5-Year Limited warranty Technical Information Height: 7.25" Length: 7.25" Weight: 3.0 lbs Width: 2.5" Power Source: Cordless Battery System: M12 Document Owner's Manual

Description The M12™ cordless grease gun develops higher pressure, offers greater productivity, and gives the user more versatility on the jobsite than any other cordless grease gun in the market. With up to 25% more pressure and runtime than the competition, the 2446-21XC delivers over 8,000 PSI max operating pressure for heavy duty applications and dispenses up to seven grease cartridges per battery charge. The M12™ cordless grease gun also features a lightweight, ergonomic handle design for greater user comfort during prolonged use and an on board hose storage and shoulder strap loop for added convenience with less mess. Features Powerful 12-volt motor: Delivers more than 8,000 PSI max operating pressure REDLITHIUM™ Battery Technology: Superior pack construction, electronics, and performance deliver more work per charge and more work over pack life than any battery on the market Best-in-class runtime: Dispenses up to 7 cartridges per charge Integrated hose storage: Adds convenience Onboard fuel gauge: Helps you increase productivity and avoid interruptions Air bleeder valve: Priming mechanism provides quick flow M12TM Lithium-Ion system: Compatible with more than 20 tools for greater versatility Maximum durability: Backed by a 5-year warranty Kit Includes (1) M12™ Cordless LITHIUM-ION Grease Gun (Tool Only) (2446-20) (1) M12™ Lithium-ion Battery Charger (48-59-2401) (1) M12™ XC High Capacity REDLITHIUM™ Battery (48-11-2402) (1) Carrying Case Technical Information Length: 14" Tool Warranty: 5 Years Weight: 7.2 lbs Power Source: Cordless Warranty: 5 Year Limited Warranty Charge Time: 30 Minutes PSI: 8000 PSI Run Time: Up to 7 Grease Cartridges per Charge Hose Length: 36" Battery System: M12 Document Owner's Manual

Description The M12™ cordless lithium-ion grease gun develops higher pressure, offers greater productivity, and gives the user more versatility on the jobsite than any other cordless grease gun in the market. With up to 25% more pressure and runtime than the competition, the 2446-20 delivers over 8,000 PSI max operating pressure for heavy duty applications and dispenses up to seven grease cartridges per battery charge. The M12™ cordless lithium-ion grease gun also features a lightweight, ergonomic handle design for greater user comfort during prolonged use and an on board hose storage and shoulder strap loop for added convenience with less mess. ***BATTERY AND CHARGER ARE NOT INCLUDED Features Powerful 12-volt motor: Delivers more than 8,000 PSI max operating pressure REDLITHIUM™ Battery Technology: Superior pack construction, electronics, and performance deliver more work per charge and more work over pack life than any battery on the market (NOT INCLUDED) Best-in-class runtime: Dispenses up to 7 cartridges per charge Integrated hose storage: Adds convenience Onboard fuel gauge: Helps you increase productivity and avoid interruptions Air bleeder valve: Priming mechanism provides quick flow M12TM Lithium-Ion system: Compatible with more than 20 tools for greater versatility Maximum durability: Backed by a 5-year warranty Technical Information Length: 14" Tool Warranty: 5 Years Weight: 7.2 lbs Power Source: Cordless Warranty: 5 Year Limited Warranty PSI: 8000 PSI Run Time: Up to 7 Grease Cartridges per Charge Hose Length: 36" Battery System: M12 Document Owner's Manual

Description The MILWAUKEE® M12™ Cable Stripper Kit with 17 Cu THHN / XHHW Bushings vastly improves the cable stripping experience. With no exposed blades, the cordless cable stripper provides safer stripping than with a knife. The cable stripper's compact, right angle design allows for maneuvering it more easily in tight spaces with less strain on the wrist. The bushing design and adjustable depth gauge deliver cleaner, more accurate, and consistent strips across all sizes. The cable jacket stripping tool is not only compatible with all Milwaukee bushings but is also compatible with competitive quick change bushings. In addition to the battery powered stripper, this kit contains 17 bushings for copper THHN and XHHW cables, one M12™ REDLITHIUM™ CP2.0 battery, an M18™ & M12™ Multi Voltage Charger, and a carrying case. Features Protects against Knife Injuries on the Job Depth Gauge Adjustment up to 3" for Accurate, Consistent Strips Compact Head, Internal Depth Gauge for Easy Access Optimized Bushing Design Prevents Nicks Variable Speed Trigger for Controlled Strips Ability to Strip in Crowded Panels and Switch Gears Quick-Change Bushing System for Faster Stripping Across Sizes Strips 1/0 - 750 MCM Cu & Al THHN/XHHW Cable Strips 1/0 - 500 MCM Cu RHW/RHH/USE Cable Compatible with All M12™ Batteries Kit Includes (1) M12™ Cable Stripper (Tool-Only) (2435-20) (1) 1/0 AWG Cu THHN/ XHHW Bushing (49-16-B01AC) (1) 2/0 AWG Cu THHN/ XHHW Bushing (49-16-B02AC) (1) 3/0 AWG Cu THHN/ XHHW Bushing (49-16-B03AC) (1) 250 MCM Cu THHN/ XHHW Bushing (49-16-B250S) (1) 4/0 AWG Cu THHN/ XHHW Bushing (49-16-B04AC) (1) 250 MCM Cu THHN/ XHHW Bushing (49-16-B250C) (1) 300 MCM Cu THHN/ XHHW Bushing (49-16-B300S) (1) 300 MCM Cu THHN/ XHHW Bushing (49-16-B300C) (1) 350 MCM Cu THHN/ XHHW Bushing (49-16-B350S) (1) 350 MCM Cu THHN/ XHHW Bushing (49-16-B350C) (1) 400 MCM Cu THHN/ XHHW Bushing (49-16-B400C) (1) 400 MCM Cu THHN/ XHHW Bushing (49-16-B400S) (1) 500 MCM Cu THHN/ XHHW Bushing (49-16-B500C) (1) 600 MCM Cu THHN/ XHHW Bushing (49-16-B600C) (1) 600 MCM Cu THHN/ XHHW Bushing (49-16-B600S) (1) 500 MCM Cu THHN/ XHHW Bushing (49-16-B500S) (1) 750 MCM Cu THHN/ XHHW Bushing (49-16-B750C) (1) M12™ REDLITHIUM™ CP2.0 Battery (48-11-2420) (1) M18™ & M12™ Multi-Voltage Charger (48-59-1812) (1) Carrying Case Technical Information Height: 11.496" Length: 8.46" Weight: 3.65 lbs Width: 2.76" Power Source: Cordless Battery System: M12 Document Owner's Manual

Description The Milwaukee® M12™ cable stripper kit for AL THHN / XHHW vastly improves the cable stripping experience. With no exposed blades, the cordless cable stripper provides safer stripping than with a knife. The cable stripper's compact, right angle design enables users to maneuver it more easily in tight spaces with less strain on the wrist. The bushing design and adjustable depth gauge deliver cleaner, more accurate and consistent strips across all sizes. The cable jacket stripping tool is not only compatible with all Milwaukee bushings but is also compatible with competitive quick change bushings. In addition to the battery powered stripper, this kit contains 11 bushings for aluminum THHN and XHHW cables, one M12™ REDLITHIUM™ CP2.0 battery, an M18™ & M12™ multi voltage charger, and a carrying case. Features Protects against Knife Injuries on the Job Depth Gauge Adjustment up to 3" for Accurate, Consistent Strips Compact Head, Internal Depth Gauge for Easy Access Optimized Bushing Design Prevents Nicks Variable Speed Trigger for Controlled Strips Ability to Strip in Crowded Panels and Switch Gears Quick-Change Bushing System for Faster Stripping Across Sizes Strips 1/0 - 750 MCM Cu & Al THHN/XHHW Cable Strips 1/0 - 500 MCM Cu RHW/RHH/USE Cable Compatible with All M12™ Batteries Kit Includes (1) M12™ Cable Stripper (Tool-Only) (2435-20) (1) 1/0 AWG Al THHN/ XHHW Bushing (49-16-B01A) (1) 2/0 AWG Al THHN/ XHHW Bushing (49-16-B02A) (1) 3/0 AWG Al THHN/ XHHW Bushing (49-16-B03A) (1) 4/0 AWG Al THHN/ XHHW Bushing (49-16-B04A) (1) 250 MCM Al THHN/ XHHW Bushing (49-16-B250) (1) 300 MCM Al THHN/ XHHW Bushing (49-16-B300) (1) 350 MCM Al THHN/ XHHW Bushing (49-16-B350) (1) 400 MCM Al THHN/ XHHW Bushing (49-16-B400) (1) 500 MCM Al THHN/ XHHW Bushing (49-16-B500) (1) 600 MCM Al THHN/ XHHW Bushing (49-16-B600) (1) 750 MCM Al THHN/ XHHW Bushing (49-16-B750) (1) M18™ & M12™ Multi-Voltage Charger (48-59-1812) (1) Carrying Case Technical Information Height 11.496" Length 8.46" Weight 3.65 lbs Width 2.76" Power Source Cordless Battery System M12 Document Owner's Manual

Description The MILWAUKEE® M12™ Cable Stripper Kit with 17 Cu THHN / XHHW Bushings vastly improves the cable stripping experience. With no exposed blades, the cordless cable stripper provides safer stripping than with a knife. The cable stripper's compact, right angle design allows for maneuvering it more easily in tight spaces with less strain on the wrist. The bushing design and adjustable depth gauge deliver cleaner, more accurate, and consistent strips across all sizes. The cable jacket stripping tool is not only compatible with all Milwaukee bushings but is also compatible with competitive quick change bushings. ***BUSHINGS, BATTERY AND CHARGER NOT INCLUDED Features Protects against Knife Injuries on the Job Depth Gauge Adjustment up to 3" for Accurate, Consistent Strips Compact Head, Internal Depth Gauge for Easy Access Optimized Bushing Design Prevents Nicks Variable Speed Trigger for Controlled Strips Ability to Strip in Crowded Panels and Switch Gears Quick-Change Bushing System for Faster Stripping Across Sizes Strips 1/0 - 750 MCM Cu & Al THHN/XHHW Cable Strips 1/0 - 500 MCM Cu RHW/RHH/USE Cable Compatible with All M12™ Batteries (NOT INCLUDED) Technical Information Height: 11.496" Length: 8.46" Weight: 3.65 lbs Width: 2.76" Power Source: Cordless Battery System: M12 Document Owner's Manual

Description The Milwaukee 2429-21XC M12™ subcompact band saw is the most compact and lightest weight cordless band saw on the market. At less than half the weight and size compared to a traditional deep cut band saw, the M12™ band saw provides onehanded power and portability to electricians, maintenance professionals, and other users cutting small diameter materials. The M12™ band saw weighs only 6.75 lbs and 12 in. in length, making it ideal for overhead or onehanded cutting applications. This powerful saw can cut through 3/4 in. EMT in only 3 seconds, and will deliver over 150 cuts per charge with the included M12™ REDLITHIUM™ XC high capacity battery. With a 15/8 in. x 15/8 in. cut capacity and low vibration, the M12™ band saw performs clean cuts on the most common small diameter metal cutting applications. The M12™ band saw also features a dual-latching lower guard that covers the blade outside the active cutting area, addressing OSHA guarding requirements and making the tool Suitable for onehanded use. The tool also includes a variable speed trigger, and LED light. Features One-Handed Cuts: Most compact size and lightest weight of any cordless band saw Dual-Actuation Trigger: Providing enhanced control and productivity Powerful Motor: Cuts 3/4" EMT in 3 seconds, up to 150 cuts per charge with the XC battery 1-5/8" Cut Capacity: For a wide range of applications Meets OSHA Guarding Requirements: Suitable for One-Handed use LED Light: Highlights the cut line Blade Tension Adjustment: Adjustable blade tracking Kit Includes (1) M12™ Sub-Compact Band Saw (Tool Only) (2429-20) (1) M12™ Lithium-ion Battery Charger (48-59-2401) (1) M12™ XC High Capacity REDLITHIUM™ Battery (48-11-2402) (1) 18 TPI Sub-Compact Band Saw Blade (1) Carrying Case Technical Information Length: 11 " Tool Warranty: 5 Years Voltage: 12V Power Source: Cordless Warranty: 5 Year Limited Warranty SFPM: 280 Blade Length: 27” x ½” x .020" Battery System: M12 Document Owner's Manual

Description The M12™ cordless lithium-ion multitool offers versatility, power and control to complete problematic jobsite applications. Ideal for remodelers, flooring contractors, maintenance repair technicians and electricians, the cordless multitool cuts, grinds, sands and scrapes at odd angles and in areas difficult to work. It’s powered by the M12™ REDLITHIUM battery (NOT INCLUDED) to deliver up to 25% more runtime than the competition. Use it to make flush or plunge cuts, remove grout, sand and tackle other awkward jobs. The M12 multitool operates from 5,000 to 20,000 OPM and allows users to match the speed to the application. The all-metal gear case provides high durability, while the over-molded, ergonomic handle offers extra control. With the universal adapter (included), the multitool is compatible with most competitor accessories for even greater versatility. ***BATTERY AND CHARGER ARE NOT INCLUDED Features Powerful motor: Delivers 5,000 to 20,000 OPM REDLITHIUM™ Battery Technology: Superior pack construction, electronics, and performance deliver more work per charge and more work over pack life than any battery on the market (NOT INCLUDED) Variable-speed dial: 12 settings allow users to match speed to application On-board fuel gauge: Displays remaining runtime Technical Information Length: 10-1/4" Tool Warranty: 5 Years Weight: 1.63 lbs Power Source: Cordless Warranty: 5 Year Limited Warranty Battery Warranty: 2 Year Battery System: M12

Description At only 11 in. and 2.6 lbs, the HACKZALL® M12™ cordless lithium-ion reciprocating saw features a compact and light weight design for superior control and versatility in tight spaces. A powerful motor delivers 03,000 strokes per minute and a 1/2 in. stroke length allows for fast cutting through a wide range of material such as drywall, wood, and PVC. The variable speed trigger allows for a controlled cut while a QUIKLOK™ blade clamp offers fast and easy blade changes. Features Only 11" and 2.2 lbs. for cutting in tight spaces Keyless QUIK-LOK™ Blade Clamp allows for quick and easy blade changes Variable Speed Trigger for increased user control Battery Fuel Gauge displays remaining run-time Accepts both HACKZALL™ and SAWZALL® style blades Built-In LED Light illuminates work surface Kit Includes (1) M12™ HACKZALL® Recip Saw (Tool Only) (2420-20) (1) M12™ Lithium-ion Battery Charger (48-59-2401) (1) M12™ REDLITHIUM™ CP1.5 Battery Pack (48-11-2401) (1) Contractor Bag Technical Information Length: 11" Tool Warranty: 5 Years Power Source: Cordless Warranty: 5 Year Limited Warranty Keyless Blade Clamp: Yes Battery System: M12 Document Owner's Manual