Tools

Description The M18 FUEL™ Super Hawg™ delivers the power and runtime necessary to complete full cordless rough ins. Optimized for plumbing, pipe fitting and HVAC professionals, this drill powers through 61/4 in. holes and can drill over (100) 29/16 in. holes per charge in 2x dimensional lumber with a self feed bit. The POWERSTATE brushless motor generates the same power and speed in application as a corded right angle drill. REDLINK PLUS intelligence is the most advanced electronic system on the market, preventing damage to the tool and battery caused by overloading or overheating. The REDLITHIUM HIGH OUTPUT™ 6.0 batteries delivers the power and runtime necessary to complete cordless rough ins. A mechanical clutch in low speed protects the tool from damage in the case that a bit binds up and the tool stalls. Features Generates Corded Power As Fast As Corded Up to 100 2-9/16" Holes Per Charge Mechanical Clutch in Low Speed All Metal 1/2" Keyed Chuck POWERSTATE™ Brushless Motor provides constant power under heavy load to power through 6-1/4" in. holes REDLINK PLUS™ Intelligence ensures maximum performance and protects from overloads, heating and over-discharge All Metal Side Handle for optimal control LED light to illuminate the work area Compatible with all M18™ batteries Part of the M18 FUEL™ System Featuring 175+ Power Tool Solutions Technical Information Height: 8.46" Length: 4.25" Weight: 12.5 lbs Width: 21.45" Power Source: Cordless Battery System: M18 Document Owner's Manual

Description Milwaukee Tool continues to innovate in a category they invented 70 years ago by delivering groundbreaking performance with the introduction of the next generation of M18 FUEL™ HOLE HAWGS® with the power and speed to replace corded right angle drills. Designed from the ground up with an upgraded POWERSTATE™ Brushless Motor and optimized REDLINK PLUS™ electronics and paired the REDLITHIUM™ HIGH OUTPUT™ 6.0AH Batteries (NOT INCLUDED) , the new M18 FUEL™ HOLE HAWG® is the fastest in applications when drilling 7/8" ship augers, delivering the ability to perform the fastest rough ins in the industry. The tool is the lightest in class at around 7lbs. When paired with the kitted paired the REDLITHIUM™ HIGH OUTPUT™ 6.0AH Batteries (NOT INCLUDED) , the new M18 FUEL™ HOLE HAWG is able to drill up to 220 7/8" holes with a ship auger on a single charge. ***BATTERY AND CHARGER ARE NOT INCLUDED Features Fastest Rough-Ins Lightest Right Angle Drill Up to 220 7/8" Holes Per Charge QUIK-LOK™ Chuck POWERSTATE™ Brushless Motor provides constant power under heavy load to power through 2-9/16" in. holes REDLINK PLUS™ Intelligence ensures maximum performance and protects from overloads, heating and over-discharge M18 REDLITHIUM™ HIGH OUTPUT™ XC6.0 Battery Pack (NOT INCLUDED) delivers over 220 7/8" holes per charge, and has 50% More Power and Runs 50% Cooler vs. REDLITHIUM™ XC LED light to illuminate the work area Compatible with all M18™ batteries Ergonomic Top Handle for maximum comfort Kit Includes (1) M18 FUEL™ HOLE HAWG® Right Angle Drill w/ QUIK-LOK™ (Tool Only) (2808-20) (1) Chuck Key Technical Information Height: 6.5" Length: 15.6" Tool Warranty: 5 Years Weight: 7.09 lbs Width: 3.7" Power Source: Cordless Warranty: 5 Year Limited Warranty Chuck Type: QUIK-LOK™ Battery System: M18 Document Owner's Manual

Description The M18 FUEL™ 11/2 in. Magnetic Drill drills faster than the number one corded competitor, delivers the strongest magnetic hold on 1/4 in. steel providing a safer drilling environment in this material, and drills over (66) 13/16 in. holes per charge. The M18 FUEL™ 11/2 in. Magnetic Drill delivers safer drilling on 1/4 in. steel by providing the industry's strongest holding force on this material. By utilizing permanent magnets, the magnetic base operates without electricity; ensuring that the magnet does not deactivate if the battery is drained. Equipped with Auto Stop liftoff detection, power to the motor is automatically cut if excess rotational motion is detected while drilling. Powered by a MILWAUKEE® POWERSTATE™ Brushless Motor, both drills are faster than their corded counterparts, and deliver the same 11/2 in. annular cutter capacity. REDLINK PLUS™ Intelligence is the most advanced electronic system on the market, preventing damage to the tool and battery caused by overloading or overheating. The M18™ REDLITHIUM™ HIGH OUTPUT™ XC8.0 Battery Pack delivers 50% more power and runs 50% cooler than M18™ REDLITHIUM™ XC5.0 batteries. It maintains full power and runs substantially cooler through heavy applications, allowing users to push their cordless tools harder and longer than ever before. The M18™ REDLITHIUM™ HIGH OUTPUT™ XC8.0 battery is fully compatible with 200+ M18™ tools. Features POWERSTATE™ Brushless Motor: Delivers maximum power and provides up to 2x longer motor life. REDLINK PLUS™ Intelligence Provides optimized performance and overload protection using total system communication between tool, battery and charger. REDLITHIUM™ XC5.0 Battery Pack: Provides superior pack construction, more work per charge and more work over the life of the pack than competitive batteries. Self-Powered Magnet Base Operates Independently of Power Source and Delivers up to 2,000 lbs. of Holding Force 1-1/2" Annular Cutter Capacity 1/2" Twist Bit Capacity 2 Speed Gear Box: 400/690 RPM Stroke Length: 5-3/4" Motor Head Adjustment: 5-1/8" Kit Includes (1) M18 FUEL™ 1-1/2" Magnetic Drill (Tool Only) (2) M18™ REDLITHIUM HIGH OUTPUT™ XC8.0 Battery (48-11-1880) (1) M18™ & M12™ Rapid Charger (48-59-1808) (1) 3/4 in. Weldon to 1/2 in. Chuck Adapter (1) Chuck Key (1) Magnetic Lubrication Tank (1) Safety Strap (1) 1” Retractable Pilot Pin (1) Carrying Case Technical Information Height: 15-1/2" Length: 13-3/4" Tool Warranty: 5 Years Weight: 29.5lbs Width: 7-1/2" Power Source: Cordless Warranty: 5 Year Limited Warranty Battery: M18™ REDLITHIUM™ Charger: M18™ and M12™ Multi-Voltage Charger Battery System: M18 Document Owner's Manual

Description The Milwaukee® M18™ FUEL™ 9 in. cutoff saw w/ ONEKEY™ is an extremely versatile solution for cutting a large variety of materials. The M18 fuel 9 in. cutoff saw runs on Milwaukee's M18 REDLITHIUM batteries instead of using gas like most traditional cutoff saws . This saw delivers the power to cut reinforced concrete as well as a large variety of other metal and masonry materials. It delivers this performance while still being up to 50% lighter than gas saws that dominate the market today. By utilizing Milwaukee's M18 REDLITHIUM high output HD12.0 battery, this saw delivers no gas headaches. It produces no fumes so it can be used indoors, it starts up instantly, it eliminates the need to mix gas and oil, and there is no gas engine maintenance. The battery will also work on any of Milwaukee's other 200+ M18 solutions. The M18™ FUEL™ 9 in. cutoff saw also has ONEKEY™ integrated so users can wirelessly connect the tool with their smart phone to track and manage the tool. Features Power To Cut Reinforced Concrete Up To 50% Lighter Than Gas No Gas Headaches Cut Depth: 3.4" Blade Diameter: 9" RPM: 6,600 Blade Arbor: 7/8" Onboard Water Connection: Quick Connect Load Indicator Light Weight (Bare Tool): 10.6lbs RAPIDSTOP™ Blade Brake ONE-KEY™ Tool Tracking and Management Fully Adjustable Guard Kit includes (1) M18 FUEL™ 9" Cut-Off Saw w/ ONE-KEY™ (2786-20) (2) M18 REDLITHIUM™ HIGH OUTPUT™ HD12.0 Battery Pack (48-11-1812) (1) M18™ & M12™ Rapid Charger (48-59-1808) (1) Diamond Premium Segmented Blades (Diamond-Premium-Segmented-Blades) (1) 9" X 3/32" X 7/8" Metal Cut-Off Wheel (49-94-9000) (1) Wrench (1) Hex Wrench Technical Information Height: 12.57" Length: 25.98" Voltage: M18 Weight: 10.6 lbs Width: 7.64" Power Source: Cordless Document Owner's Manual

Description The Milwaukee® M18™ FUEL™ 9 in. cutoff saw w/ ONEKEY™ is an extremely versatile solution for cutting a large variety of materials. The M18 fuel 9 in. cutoff saw runs on Milwaukee's M18 REDLITHIUM batteries (NOT INCLUDED) instead of using gas like most traditional cutoff saws . This saw delivers the power to cut reinforced concrete as well as a large variety of other metal and masonry materials. It delivers this performance while still being up to 50% lighter than gas saws that dominate the market today. By utilizing Milwaukee's M18 REDLITHIUM high output HD12.0 battery (NOT INCLUDED) , this saw delivers no gas headaches. It produces no fumes so it can be used indoors, it starts up instantly, it eliminates the need to mix gas and oil, and there is no gas engine maintenance. The battery will also work on any of Milwaukee's other 200+ M18 solutions. The M18™ FUEL™ 9 in. cutoff saw also has ONEKEY™ integrated so users can wirelessly connect the tool with their smart phone to track and manage the tool. ***BATTERY AND CHARGER ARE NOT INCLUDED Features Power To Cut Reinforced Concrete Up To 50% Lighter Than Gas No Gas Headaches Cut Depth: 3.4" Blade Diameter: 9" RPM: 6,600 Blade Arbor: 7/8" Onboard Water Connection: Quick Connect Load Indicator Light Weight (Bare Tool): 10.6lbs RAPIDSTOP™ Blade Brake ONE-KEY™ Tool Tracking and Management Fully Adjustable Guard Kit includes (1) M18 FUEL™ 9" Cut-Off Saw w/ ONE-KEY™ (2786-20) (1) Diamond Premium Segmented Blades (Diamond-Premium-Segmented-Blades) (1) 9" X 3/32" X 7/8" Metal Cut-Off Wheel (49-94-9000) (1) Wrench (1) Hex Wrench Technical Information Height: 12.57" Length: 25.98" Voltage: M18 Weight: 10.6 lbs Width: 7.64" Power Source: Cordless Document Owner's Manual

Description The M18 FUEL™ 53/8 in. – 57/8 in. metal saw delivers the fastest cuts with the longest tool life and up to 370 cuts in 3/4 in. EMT. This compact and lightweight metal cutting saw utilizes a POWERSTATE™ brushless motor with 3,900 RPMs to deliver the fastest cutting speeds and longest tool life on the market. The metal saw also features REDLINK Plus™ intelligence, the most advanced system of cordless power tool electronics, for maximum performance and unmatched durability. The M18™ REDLITHIUM™ XC5.0 battery pack (NOT INCLUDED) delivers up to 370 cuts in 3/4 in. EMT which is 1 cut per minute for over 6 hours straight. The Milwaukee M18 FUEL™ 53/8 in. – 57/8 in. metal saw features a compact, low profile design for easy handling and increased control. At only 5.9 lbs, this lightweight circular metal saw delivers easier overhead cuts and less user fatigue. The new saw offers an integrated hang hook that allows for easy storage while the tool is not in use. The extra large cut guide, impact resistant window and LED light ensure superior line of site and the stainless steel shoe reduces chip buildup to prevent surface marring. The 2782 M18 FUEL™ metal saw features a 30T carbide tipped metal saw blade for cool, burr free cuts through EMT, strut, threaded rod, sheet metal, angle iron and other ferrous materials. Backed by Milwaukee's 5year warranty, the 2782-20 comes equipped with a 30T 53/8 in. metal tech ™ carbide tipped metal saw blade and blade wrench. ***BATTERY AND CHARGER ARE NOT INCLUDED Features Milwaukee® POWERSTATE™ Brushless Motor provides more power, more run-time, and longer life. The Milwaukee® REDLITHIUM™ Battery Pack is the most durable pack on the market delivering more run-time, power and longer battery life. REDLINK PLUS™ Electronic Intelligence enables advanced communication between your batteries and tools, allowing for unmatched levels of performance, protection, and productivity. Brushless motor with 3,900 RPMs delivers the fastest cutting metal cutting saw Brushless motor has no wearable components delivering longest tool life M18™ REDLITHIUM™ Batteries (not included) deliver up to 370 cuts in 3/4" EMT for all day work Integrated hang hook allows tool to hang on ladders and common building materials reducing damage due to drops Kit Includes (1) M18 FUEL™ Metal Cutting Circular Saw (Tool Only) (2782-20) (1) Allen Wrench (1) 5-3/8" 30T Blade Technical Information Height: 8.50" Length: 12.25" Tool Warranty: 5 Years Voltage: 18V Weight: 4.80 lbs Power Source: Cordless Warranty: 5 Year Limited Warranty Battery System: M18 Document Owner's Manual

Description The M18™ Force Logic™ 12T utility crimper is the easiest way to crimp. Engineered to reduce weight and improve balance, it is up to three pounds lighter, is fully balanced, with a 350˚ rotating head and red alignment marks making it the lightest, most balanced and easiest crimper to align. Predictive force monitoring (PFM™) constantly measures force output to deliver consistent speed that won’t bog down on larger connectors while delivering accurate pressure, every time. The only tool that provides instant pressure verification with a green indicator. The only tool that has pre crimp battery check that automatically ensures enough battery charge to complete each crimp. The only tool that once a crimp is engaged, has autocomplete to ensure full pressure is reached. Milwaukee® crimpers feature a fully enclosed high speed hydraulic pump, POWERSTATE™ brushless motor, REDLINK™ electronics and REDLITHIUM™ batteries delivering up to 2X longer life and ultimate reliability in tough conditions. Featuring Milwaukee® ONEKEY™ Technology, Milwaukee® crimpers enable you to store real time crimp data, generate professional reports, view historical tool performance data and sync it all wirelessly to the cloud for easy access. Like all ONEKEY™ tools Milwaukee® crimpers feature tool tracking, allowing you to pinpoint missing tools quicker and inventory management which creates a central place for you to track all tools and equipment across your network of jobs and users. Features Lightest 12T Crimper Most Balanced with Ergonomic Grip Design PFM™ (Predictive Force Monitoring) with Auto Complete Ensures Full Pressure PFM™ (Predictive Force Monitoring) Provides Instant Pressure Verification with Green Indicator Longer Life with POWERSTATE™ Brushless Motor & Weather Protected Electronics that Keep Dirt, Dust & Moisture Out Pre-Crimp Battery Check Automatically Ensures Enough Charge to Complete Each Crimp 350˚ Head Rotation Provides Easy Access in Tight Spaces Bold Alignment Marks aid accuracy in crimp placement The Tool Records & Stores Every Crimp Made for Professional Report Building through ONE KEY™ Kit Includes (1) M18™ FORCE LOGIC™ 12 Ton Utility Crimper (Tool Only) (2778-20) (1) M18™ & M12™ Multi-Voltage Charger (48-59-1812) (1) M18™ REDLITHIUM™ CP2.0 Battery (48-11-1820) (1) M18™ REDLITHIUM™ XC5.0 Extended Capacity Battery Pack (48-11-1850) (1) Carabineer (1) Overhead Utility Bag (1) Inverter Technical Information Length: 16.0" Tool Warranty: 5 Years Weight: 11.7 lbs Power Source: Cordless ONE KEY Enabled: Yes Battery: M18™ REDLITHIUM™ Output Force: 12 Tons Head Rotation: 350 degrees Adaptive Pressure Control System: Yes Reporting and Tool Diagnostics: Yes Full Pressure Indicator: Yes Battery Warranty: 3 Year Battery System: M18 Document Owner's Manual

Description The M18™ Force Logic™ 1590 ACSR cutter is the simplest way to cut transmission lines. A patent pending jaw design enables opening with just two fingers, enhancing alignment while delivering easiest operation with class 3 gloves. The wire automatically closes the jaw, providing handsfree jaw closure and the easiest midspan cuts. Fully balanced, only 11.75 lbs, and the fastest transmission cutter, the M18™ Force Logic™ 1590 ACSR cutter delivers the best control while enhancing lineman's productivity and reducing fatigue. The M18™ Force Logic™ 1590 ACSR cutter features a fully enclosed high speed hydraulic pump, brushless motor, REDLINK™ electronics and REDLITHIUM™ battery delivering ultimate reliability in the toughest conditions. Featuring Milwaukee® ONEKEY™ Technology, view tool usage, receive notifications for recommended maintenance and sync information wirelessly to the cloud. Features Milwaukee® POWERSTATE™ Brushless Motor provides more power, more run-time, and longer life. The Milwaukee® REDLITHIUM™ Battery Pack is the most durable pack on the market delivering more run-time, power and longer battery life. REDLINK PLUS™ Electronic Intelligence enables advanced communication between your batteries and tools, allowing for unmatched levels of performance, protection, and productivity. Cuts up to 1590 Falcon ACSR, and 1/2" EHS Guy Wire Patent pending jaw design enables opening with just two fingers, enhancing alignment while delivering easiest operation with Class 3 Gloves Wire automatically closes the jaw, providing hands-free jaw closure and the easiest mid-span cuts Fully balanced design delivers the best control Powerful 9T hydraulic pump delivers the fastest transmission wire cuts for enhanced productivity Fully enclosed high speed hydraulic pump, Brushless Motor, REDLINK™ Electronics and REDLITHIUM™ Battery combine to deliver ultimate reliability in the toughest conditions Milwaukee® ONE KEY™ Technology allows Linemen to view tool usage, receive notifications for recommended maintenance, and sync information wirelessly to the cloud Kit Includes (1) M18™ FORCE LOGIC™ 1590 ACSR Cable Cutter (1) M18™ & M12™ Multi-Voltage Charger (48-59-1812) (1) M18™ REDLITHIUM™ XC5.0 Extended Capacity Battery Pack (48-11-1850) (1) Carabineer (1) Utility Bag (1) Inverter Technical Information Height: 12.5" Length: 16.7" Tool Warranty: 5 Years Weight: 11.7 lbs Width: 3.3" Power Source: Cordless Battery System: M18 Document Owner's Manual

Description The M18™ Force Logic™ 3 in. Underground cable cutter is the most controlled way to cut. With a new to world design, it is engineered to deliver the best cutting experience in a trench. Linemen can now scoop the cable into the open jaw with ease, maintaining balance when lining up to cut. Once aligned, the M18™ Force Logic™ 3 in. Underground cable cutter is the fastest cutter in its class, making installation and wrecking of up to 1500MCM copper 15mV cable a breeze. The M18™ Force Logic™ 3 in. Underground cable cutter features a fully enclosed high speed hydraulic pump, brushless motor, REDLINK™ electronics and REDLITHIUM™ battery delivering ultimate reliability in the toughest conditions. Featuring Milwaukee® ONEKEY™ Technology, view tool usage, receive notifications for recommended maintenance and sync information wirelessly to the cloud. Features Milwaukee® POWERSTATE™ Brushless Motor provides more power, more run-time, and longer life. The Milwaukee® REDLITHIUM™ Battery Pack is the most durable pack on the market delivering more run-time, power and longer battery life. REDLINK PLUS™ Electronic Intelligence enables advanced communication between your batteries and tools, allowing for unmatched levels of performance, protection, and productivity. Cuts up to 1500MCM Copper 15kV cable In-line design delivers easiest access in trenches Top-handle layout provides balanced cut alignment Powerful 9T hydraulic pump delivers best in class cut speed Fully enclosed high speed hydraulic pump, Brushless Motor, REDLINK™ Electronics and REDLITHIUM™ Battery combine to deliver ultimate reliability in the toughest conditions Milwaukee® ONE KEY™ Technology allows Linemen to view tool usage, receive notifications for recommended maintenance, and sync information wirelessly to the cloud Kit Includes (1) M18™ FORCE LOGIC™ 3” Underground Cable Cutter (1) M18™ REDLITHIUM™ XC5.0 Extended Capacity Battery Pack (48-11-1850) (1) M18™ & M12™ Multi-Voltage Charger (48-59-1812) (1) Inverter (1) Carabineer (1) Utility Bag Technical Information Height 12.4" Length 20.8" Tool Warranty 5 Years Weight 15.7 lbs Width 4.9" Power Source Cordless Battery M18™ REDLITHIUM™ Battery Warranty 2 Year Battery System M18 Document Owner's Manual

Description The M18 FUEL™ 1/2 in. extended anvil controlled torque impact wrench w/ ONEKEY™ delivers controlled torque for fastening and up to 1,100 ftlbs of nut busting torque. Professional tire technicians can perform faster tire service without the hassle of pneumatic hoses, compressors, and torque sticks. Four customizable modes deliver unique fastening torque outputs needed to perform tire service on vehicles such as sedans, light trucks and box trucks. With up to 1,100 ftlbs of breakaway torque, this tool provides more than enough power to remove rusted lug nuts. The REDLITHIUM™ battery pack (not included) is compatible with 175+ M18™ tools, delivering you with more work per charge and more work over the life of the pack than competitors. With ONEKEY™, you also gain the ability to customize, track and manage your impact wrench. ***BATTERY AND CHARGER ARE NOT INCLUDED Features Controlled Torque Output Up to 1,100ft-lbs Nut busting Torque Faster Tire Service 4 customizable Drive Control™ modes provide multiple fastening torque outputs designed for vehicles such as sedans, light trucks and box trucks POWERSTATE™ Brushless Motor delivers up to 750 ft-lbs of fastening torque and 1,100 ft-lbs of nut-busting torque Enables users to perform Faster Tire Service by removing the hassle of pneumatic hoses, compressors, and torque sticks Part of the M18™ System, featuring over 175+ Tools POWERSTATE™ Brushless Motor delivers maximum power and long motor life REDLINK PLUS™ Intelligence prevents damage to the tool and battery due to overloading or overheating REDLITHIUM™ batteries (not included) deliver more work per charge and more work over the life of the battery ONE-KEY™ Compatible: Ability to Customize, Track and Manage tools for increased productivity and investment protection Premium rubber over mold withstands corrosive materials and provides increased comfort when in use LED light to illuminate the work area Technical Information Length: 10.1" Weight: 5.8 lbs Power Source: Cordless Anvil Type: 1/2" Extended Square w/ Friction Ring RPM: 0-1800 IPM: 0-2400 Battery System: M18 Document Owner's Manual

Description The 2766 M18 FUEL™ high torque 1/2 in. impact wrench with pin detent provides a full corded replacement delivering 750ftlbs of fastening torque and 1100ftlbs of nut-busting torque. The industry’s most compact cordless high torque impact wrench at 8.1 in. in length, this tool allows for more access in tight spaces. 4Mode DRIVE CONTROL™ with bolt removal mode gives users the most control over their fasteners. Bolt removal mode gives the user more control when removing fasteners by slowing to 750 RPM once the fastener has been busted loose. This tool includes a 1/2 in. pin detent anvil which provides superior socket retention. A premium rubber over-mold material gives you ultimate comfort during prolonged use while lasting longer against corrosive materials. Features Most compact cordless High Torque Impact Wrench in its class at 8.1" in length Bolt removal mode provides maximum nut-busting torque to break fastener free, then slows to 750rpm for more control when removing fasteners REDLINK PLUS™ intelligence prevents damage to the tool and battery due to overloading or overheating REDLITHIUM™ batteries deliver more work per charge and more work over the life of the battery Features a pin detent design for maximum socket retention Premium rubber over-mold withstands corrosive materials and provides increased comfort when in use Reduced user fatigue at only 7.1lbs with battery (battery not included) LED light to illuminate the work area Technical Information Length 8.1" Tool Warranty 5 Years Voltage 18V Weight 5.5 lbs Power Source Cordless Fastening Torque 750 ft-lbs IPM 1,150/2,100/2,400/2,400 RPM 0 to 950/1,500/1,800/1,800-750 Drive Control 4-mode LED Light Yes Nut Busting Torque 1100 ft-lbs Battery System M18 Document Owner's Manual

Description The M18 FUEL™ SURGE™ 1/4 in. hex hydraulic driver is the quietest cordless fastening solution on the market. With Milwaukee's new FLUIDDRIVE™ hydraulic powertrain, users will experience up to 50% quieter operation, 3X less vibration for smoother operation, and faster driving speeds compared to standard impacts . The POWERSTATE brushless motor delivers up to 03, 000 RPM with constant power output to drive screws faster. REDLINK PLUS intelligence is the most advanced electronic system on the market, preventing damage to the tool and battery caused by overloading or overheating. For use with REDLITHIUM compact batteries or extended capacity batteries (sold separately), which deliver more work per charge and more work over the life of the pack than competitive batteries on the market. The 4mode drive control provides greater control over output speed and power for greater versatility. Self tapping screw mode is designed to reduce walking when starting self tapping screws as well as reduce overdriving, breaking and stripping out screws. ***BATTERY AND CHARGER ARE NOT INCLUDED Features Milwaukee® POWERSTATE™ Brushless Motor provides more power, more run-time, and longer life. REDLINK PLUS™ Electronic Intelligence enables advanced communication between your batteries and tools, allowing for unmatched levels of performance, protection, and productivity Technical Information Height: 7.67" Length: 5" Voltage: 18V Weight: 2.3 lbs Width: 2.38" Power Source: Cordless Warranty: 5 Year Limited Warranty LED Light: Yes Technology: SURGE Hydraulic Driver Battery System: M18 Document Owner's Manual

Description The M18 FUEL™ 18ga 1/4” Narrow Crown Stapler delivers peak productivity on your job site, providing you with unmatched stapling performance without the hassle of a compressor and hose. We’ve leveraged our nitrogen air spring mechanism, to give the Narrow Crown Stapler the power to consistently sink staples to the proper depth in hard materials. This cordless stapler also has tool free depth adjustment to drive staples in soft materials without blowing through. You can choose from sequential and contact actuation firing modes to meet your application’s needs. The combination of our POWERSTATE™ Brushless Motor and REDLINK PLUS™ Intelligence provides you with a staple gun that delivers an unmatched fire rate with zero ramp up time. This battery powered narrow crown stapler is compact and lightweight, giving you better access into tight spaces and limiting your fatigue throughout the day. The MILWAUKEE® M18 FUEL™ 18ga 1/4” Narrow Crown Stapler delivers the pneumatic performance that professional carpenters and remodelers expect with the freedom and convenience of a cordless tool. The tool includes two work contact tips and a reversible belt hook. ***BATTERY AND CHARGER ARE NOT INCLUDED Features Delivers consistent, clean staple setting, with the power to drive into hard materials and adjustability for soft materials Compact size and light weight Zero Ramp-Up Time Fully compatible with the M18™ system, featuring over 200+ tools Tool free drive depth adjustment Sequential and contact actuation firing modes Dry fire lockout No Gas cartridge required 2 work contact tips included Reversible belt hook included ON/OFF power button Technical Information Height: 10.7"" Length: 11" Weight: 5.4 lbs Width: 3.4" Power Source: Cordless Staple Length: 3/8" - 1-1/2" Battery System: M18 Document Owner's Manual

Description The Milwaukee® M18 FUEL™ 18 gauge brad nailer kit delivers peak productivity, providing unmatched nailing performance without the hassle of a compressor and hose. Using a nitrogen air spring mechanism, the finish nailer consistently sinks nails to the proper depth in hard and soft woods while leaving clean nail holes matching the head of the nail. The combination of Milwaukee's POWERSTATE™ brushless motor and REDLINK Plus™ intelligence delivers unmatched fire rate with zero ramp-up time for all-day efficiency. The cordless brad nailer operates using Milwaukee's REDLITHIUM™ batteries and sealed compressed nitrogen to drive each nail, eliminating the cost of gas cartridges and associated maintenance. The 18 gauge nailer is compact and lightweight, providing unmatched access into tight spaces and limiting fatigue. The M18 FUEL™ 18 gauge brad nailer delivers pneumatic performance that professional carpenters and remodelers expect with the freedom and convenience of cordless. Features Consistent, clean nail holes Compact size Zero ramp-up time No gas cartridge required Tool free drive depth adjustment Sequential and contact actuation firing modes Dry fire lockout Tool free jam clearing latch Reversible belt hook included Three interchangeable tips included On / Off power button Technical Information Height 10.2" Length 11.9" Weight 6.3 lbs Width 3.3" Power Source Cordless Battery System M18 Document Owner's Manual

Description The Milwaukee® M18 FUEL™ 30 degree framing nailer kit sets the new standard for cordless framing nailers. It has a nitrogen spring mechanism, POWERSTATE™ brushless motor, and REDLINK™ Intelligence, providing pneumatic performance and cordless convenience. The framing nailer can sink full round head nails into dense engineered lumber to tackle the most demanding framing applications. To increase productivity and efficiency, the framing gun fires 3 nails per second with zero ramp up time, firing a nail as soon as the trigger is pulled. The cordless framing nailer uses only Milwaukee's REDLITHIUM™ batteries and sealed compressed nitrogen to drive each nail, eliminating the cost of gas cartridges and associated maintenance. The M18 FUEL™ 30 degree framing nailer delivers pneumatic performance and durability that professional carpenters and remodelers expect, without the hassle of a compressor and hose or gas cartridge. Features Power to sink nails in engineered lumber Fires 3 nails per second No gas cartridge required Zero ramp-up time Tool free drive depth adjustment Sequential and contact actuation firing modes Dry fire lockout Rafter hook included On board hex key storage On / Off power button No-mar tip included Kit Includes (1) F raming nailer (1) M18™ REDLITHIUM™ XC5.0 battery pack (1) M18™ & M12™ Multi-Voltage Charger (1) Rafter hook (1) Non-marring tip (1) Contractor bag Technical Information Height: 13.3" Length: 14.1" Weight: 9.6 lbs Width: 4.7" Power Source: Cordless Nail Collation Angle: 30°- 34° Nail Length: 2”- 3 ½” Nail Shank Diameter: .113” - .131” Nail Head Style: Clipped Head Nails and Full Round Offset Head Nails Battery System: M18 Document Owner's Manual

Description The Milwaukee® M18 FUEL™ 30 degree framing nailer kit sets the new standard for cordless framing nailers. It has a nitrogen spring mechanism, POWERSTATE™ brushless motor, and REDLINK™ Intelligence, providing pneumatic performance and cordless convenience. The framing nailer can sink full round head nails into dense engineered lumber to tackle the most demanding framing applications. To increase productivity and efficiency, the framing gun fires 3 nails per second with zero ramp up time, firing a nail as soon as the trigger is pulled. The cordless framing nailer uses only Milwaukee's REDLITHIUM™ batteries and sealed compressed nitrogen to drive each nail, eliminating the cost of gas cartridges and associated maintenance. The M18 FUEL™ 30 degree framing nailer delivers pneumatic performance and durability that professional carpenters and remodelers expect, without the hassle of a compressor and hose or gas cartridge. ***BATTERY AND CHARGER ARE NOT INCLUDED Features Power to sink nails in engineered lumber Fires 3 nails per second No gas cartridge required Zero ramp-up time Tool free drive depth adjustment Sequential and contact actuation firing modes Dry fire lockout Rafter hook included On board hex key storage On / Off power button No-mar tip included Technical Information Height: 13.3" Length: 14.1" Weight: 9.6 lbs Width: 4.7" Power Source: Cordless Nail Collation Angle: 30°- 34° Nail Length: 2”- 3 ½” Nail Shank Diameter: .113” - .131” Nail Head Style: Clipped Head Nails and Full Round Offset Head Nails Battery System: M18 Document Owner's Manual

Description The M18™ FUEL™ 16 gauge straight finish nailer delivers on the promise of peak productivity at your work site, providing unmatched driving power, speed and efficiency – with practically no set up and minimal maintenance. Using the exceptional application speed, power and durability of our compact POWERSTATE™ brushless motor, plus our ready to fire cylinder design, this tool is capable of fully sinking 21/2 in. nails into solid oak with zero rampup time. This 18 Volt nailer operates from the revolutionary REDLITHIUM™ battery (NOT INCLUDED) for unbeatable strength and runtime, eliminating the mess and cost of gas cartridges. It also includes REDLINK Plus™ intelligence, the most advanced electronic system on the market, to prevent damage to the nailer and battery from overloading and overheating. The M18™ FUEL™ nailer not only primes you for top performance; it also creates the experience of a pneumatic nailer that professional carpenters and remodelers expect, without the hassle of compressors and hoses. ***BATTERY AND CHARGER ARE NOT INCLUDED Features Milwaukee® POWERSTATE™ Brushless Motor provides more power, more run-time, and longer life. REDLINK PLUS™ Electronic Intelligence enables advanced communication between your batteries and tools, allowing for unmatched levels of performance, protection, and productivity. Sink 2-1/2” Finish Nails in Solid Oak Zero Ramp-Up Time No Gas Cartridges Technical Information Length: 11.9" Tool Warranty: 5 Years Voltage: 18V Weight: 6.3 lbs Power Source: Cordless Motor Type: Brushless Firing Modes: Sequential and Contact Actuation Warranty: 5 Year Limited Warranty Magazine Capacity: 110 Magazine Loading Style: Bottom Load Nail Diameter: 16ga Nail Size: 3/4" - 2-1/2" Tool Free Depth of Drive Adjustment: Yes Oil Free: Yes Dry Fire Lock Out: Yes Tool Free Jam Release: Yes Nail Quantity Indicator: Yes Non Marring Nose Pad: Yes LED Light: Yes Adjustable Belt Hook: Yes Battery System: M18 Document Owner's Manual

Description Designed for the professional carpenter, remodeler and general contractor, the M18 FUEL™ 12 in. sliding miter saw can generate the power of a 15 amp corded saw while weighing in at up to 15% lighter than leading competitive saw and up to 330 cuts per charge. With the same capacity as AC 12 in. miter saw the 2739 provides users all ability to perform all of their critical applications while increase portability, efficiency and productivity on site. Features like a shadow line LED light, an adjustable stainless steel detent plate, cam locking miter system and easy carry side handles make the saw a category leading solution. ***BATTERY AND CHARGER ARE NOT INCLUDED Features POWERSTATE™ Brushless Motor: Purposely built for the M18 FUEL™ 12" Miter saw to generate the power and performance of a 15A corded miter saw REDLINK PLUS™ Intelligence: Ensures optimal performance and provides overload protection to prevent damage to the tool and battery during heavy applications while still maintaining compatibility across the entire M18™ System Generates 15 Amp Corded Power Up to 15% Lighter Than Leading Competitors Up to 330 Cuts Per Charge Shadow Cut Line LED Integrated Handles 6-3/4" Vertical Capacity (Base Board Against the Fence) 2x14 Horizontal Capacity 7-1/2" Nest Crown Capacity Kit Includes (1) M18 FUEL™ 12" Dual Bevel Sliding Compound Miter Saw - (Tool Only) (2739-20) (1) 12" Miter Saw Blade (1) Clamp (1) Handle Technical Information Height 17.5" Length 33" Tool Warranty 5 years Weight 47.6 lbs Width 31.5" Power Source Cordless RPM 3,500 Max Miter Capacity 55 / 60 Max Bevel Capacity 48 / 48 Vertical Capacity Against Fence 6-3/4" Vertical Capacity Nested Crown 7-1/2" 90 degree Cross Cut Capacity 2 x 14 45 degree Miter Cross Cut Capacity 8" 45 degree Bevel Cross Cut Capacity 2 x 14 Battery System M18 Document Owner's Manual

Description The M18 FUEL™ 7 in. variable speed polisher is the world’s first cordless fullsize rotary polisher. By harnessing the power, performance and runtime of M18 FUEL™ technology, this tool delivers corded performance that allows users to power through the most demanding applications. At more than 1 lb lighter than corded, and the ability to deliver total control through a variable speed dial and trigger, the new M18 FUEL™ polisher frees users from the extra work, distractions, paint damage, and inconvenience caused by cords. Paired with M18 XC5.0 batteries (NOT INCLUDED) , the M18 FUEL™ polisher can complete a full size car on one charge when working on moderate to good paint. The M18 FUEL™ polisher is equipped with a rubber over mold front housing to protect the paint from scratches in use as well as a removable dust cover to protect the motor and electronics from wool fibers and residue. The new tool is designed to distribute more of its weight over the pad, providing natural pressure on the surface area and more comfort to the user while polishing. ***BATTERY AND CHARGER ARE NOT INCLUDED Features Cordless detailing Total control Full-size car on 1 charge 7 in. pad capacity 0 - 2,200 RPM Variable speed dial and trigger Lock-on/lock-off switch Constant power technology Compatible with all M18 REDLITHIUM batteries and chargers (NOT INCLUDED) Kit includes (1) M18 FUEL™ 7” Variable Speed Polisher (Tool Only) (2738-20) (1) Backing Pad (1) Screen Cover (1) Side Handle Technical Information Height: 3.31" Length: 19.8" Tool Warranty: 5 Years Voltage: 18V Weight: 6.4 lbs w/ 5.0 Battery Width: 4.10" Power Source: Cordless Warranty: 5 Year Limited Warranty Polishing RPM: 0 - 2,200 RPM Trigger Lock: On Off Capacity: 7" Battery System: M18 Document Owner's Manual

Description The M18™ FUEL™ D-handle jig saw combines power, blade speed and precision, to provide the highest quality cuts in a wide variety of materials. The M18™ FUEL™ D-handle jig saw leverages the POWERSTATE brushless motor and REDLINK Plus™ intelligence to provide higher blade speed than corded jig saws at 3500 strokes per minute for clean controlled cuts with minimized chipping or bucking. Leveraging the M18™ REDLITHIUM™ XC5.0 battery (NOT INCLUDED) the M18™ FUEL™ D-handle jig saw provides up to 105 linear feet of cutting in 3/4 in. laminated particle board, delivering all day productivity with less trips to the charger. The saw features tool-less blade change, tool free bevel adjust with pin-detents at 0°; 15°; 30°; and 45° as well as an LED light and on/off blower to keep the cut line visible while cutting. ***BATTERY AND CHARGER ARE NOT INCLUDED Features POWERSTATE™ Brushless Motor: Increased SPM and the power to cut hard materials, including hardwoods and metals REDLINK PLUS™ Intelligence: the most advanced system of cordless power tool electronics; provides optimized performance and overload protection using total system communication between tool, battery and charger REDLITHIUM battery technology: superior pack construction, electronics and performance deliver more work per charge and more work over pack life than any battery on the market (BATTERY NOT INCLUDED) Variable speed ranges between 0 and 3500 strokes per minute, providing precise control for clean cuts with less chipping 4-position orbital cutting provides versatility for application-specific cutting Toolless shoe bevel with positive stops allows for quick and accurate shoe adjustment with detents at 0°, 15°, 30° and 45° On/Off cut line blower keeps the cut line clear of debris, and allows user to turn off blower when using dust extraction LED light illuminates the cut line Includes dust cover and dust extraction tube Includes non-marring shoe cover for protection of finished surfaces Accepts T-Shank jig saw blades Part of the M18 System, featuring over 150+ tools Kit Includes (1) M18 FUEL™ D-Handle Jig Saw (Tool Only) (2737-20) (1) Anti-Splinter Guard (1) Dust Collection Tube (1) Dust Cover (1) General Purpose Jigsaw Blade (1) Hex Wrench (1) Shoe Guard Technical Information Voltage 18V Power Source Cordless Battery System M18 Document Owner's Manual

Description The Milwaukee M18 FUEL™ 8-1/4 in. table saw with ONEKEY™ generates the power of a 15 A corded saw, 241/2 in. of rip capacity and up to 600 linear feet of cutting per charge. Designed for professional carpenter, remodeler and general contractor the Milwaukee M18 FUEL™ 81/4 in. table saw with ONEKEY™ is optimized for power, portability and productivity. The POWERSTATE™ brushless motor provides 6,300 RPM and higher speeds under load for corded cutting performance. REDLINK Plus™ intelligence ensures maximum performance and protection from overload, overheating and over discharge. The M18 REDLITHIUM HIGH OUTPUT™ HD12.0 battery delivers unmatched runtime in all applications. The rack and pinion fence system maintains accuracy and allows for quick adjustments. For maximum productivity, the tool has on board storage for the included accessory and a tool free guard and riving knife changes. An all metal frame provides durability for daily jobsite use. Compatible with ONEKEY™, this is the industry’s first table saw that wirelessly connects to a smart phone to track and manage a tool’s performance and location. Integrated tool tracking, available through ONEKEY™, provides full visibility to how and where tools are being used across your network of jobs and users. The app will track all ONEKEY™ compatible devices within 100 ft range of your phone. By building the functionality into the tool, not the battery, all devices can be tracked, even if the battery is not charged or on the tool. The app will automatically keep records of the last time a tool was within range of the app, allowing you to pinpoint missing tools quicker and increase accountability of your crew. Paired with tracking, integrated tool security provides the ultimate theft protection. Protect your investment with features like tool lockout, or hide tool from the nearby devices screen so only you can see your tool is in range. Features POWERSTATE™ Brushless Motor: Purposely built for the M18 FUEL™ 8-1/4" Table Saw w/ One-Key(TM) to provide the power and performance of a 15A corded table saw. REDLINK PLUS™ Intelligence: Ensures optimal performance and provides overload protection to prevent damage to the tool and battery during heavy applications while still maintaining compatibility across the entire M18™ System. REDLITHIUM™ HIGH OUTPUT™ HD12.0 Battery Pack: Provides 50% more power and runs 50% cooler versus standard REDLITHIUM™ HD packs. Superior pack construction provides the industry's best protection against jobsite conditions. 24-1/2" Rip Capacity to rip 4x8 sheets of plywood or OSB Rack and Pinion Fence System for square cuts and easy adjustment All metal frame to handle tough jobsite conditions On board storage for guard, riving knife, push stick, fence and miter gauge Tool free guard and riving knife changes Single wrench blade change Kit includes (1) M18 FUEL™ 8-1/4" Table Saw w/ One-Key™ (2736-20) (1) M18 REDLITHIUM™ HIGH OUTPUT™ HD12.0 Battery Pack (48-11-1812) (1) M18™ & M12™ Rapid Charger (48-59-1808) (1) Anti Kick Back Pawls (1) Blade (1) Blade Wrench (1) Guard (1) Miter Gauge (1) Riving Knife Technical Information Blade Size: 8-1/4" Height: 12" Length: 22" Tool Warranty: 5 Year Voltage: 18V Weight: 41.6 lbs Width: 22.5" Power Source: Cordless RPM: 6,300 Cut Depth at 90: 2-1/2" Cut Depth at 45: 1-3/4" Battery Type: 18V Lithium-Ion Arbor Size: 5/8" Max Bevel: 47 Degrees Battery System: M18 Document Owner's Manual

Description The Milwaukee M18 FUEL™ 81/4 in. table saw with ONEKEY™ generates the power of a 15 A corded saw, 241/2 in. of rip capacity and up to 600 linear feet of cutting per charge. Designed for professional carpenter, remodeler and general contractor the Milwaukee M18 FUEL™ 81/4 in. table saw with ONEKEY™ is optimized for power, portability and productivity. The POWERSTATE™ brushless motor provides 6,300 RPM and higher speeds under load for corded cutting performance. REDLINK Plus™ intelligence ensures maximum performance and protection from overload, overheating and over discharge. The M18 REDLITHIUM HIGH OUTPUT™ HD12.0 battery (sold separately) delivers unmatched runtime in all applications. The rack and pinion fence system maintains accuracy and allows for quick adjustments. For maximum productivity, the tool has on board storage for the included accessory and a tool free guard and riving knife changes. An all metal frame provides durability for daily jobsite use. Compatible with ONEKEY™, this is the industry’s first table saw that wirelessly connects to a smart phone to track and manage a tool’s performance and location. Integrated tool tracking, available through ONEKEY™, provides full visibility to how and where tools are being used across your network of jobs and users. The app will track all ONEKEY™ compatible devices within 100 ft range of your phone. By building the functionality into the tool, not the battery, all devices can be tracked, even if the battery is not charged or on the tool. The app will automatically keep records of the last time a tool was within range of the app, allowing you to pinpoint missing tools quicker and increase accountability of your crew. Paired with tracking, integrated tool security provides the ultimate theft protection. Protect your investment with features like tool lockout, or hide tool from the nearby devices screen so only you can see your tool is in range. ***BATTERY AND CHARGER ARE NOT INCLUDED Features POWERSTATE™ Brushless Motor: Purposely built for the M18 FUEL™ 8-1/4" Table Saw w/ One-Key(TM) to provide the power and performance of a 15A corded table saw. REDLINK PLUS™ Intelligence: Ensures optimal performance and provides overload protection to prevent damage to the tool and battery during heavy applications while still maintaining compatibility across the entire M18™ System. REDLITHIUM™ HIGH OUTPUT™ HD12.0 Battery Pack (NOT INCLUDED) : Provides 50% more power and runs 50% cooler versus standard REDLITHIUM™ HD packs. Superior pack construction provides the industry's best protection against jobsite conditions. 24-1/2" Rip Capacity to rip 4x8 sheets of plywood or OSB Rack and Pinion Fence System for square cuts and easy adjustment All metal frame to handle tough jobsite conditions On board storage for guard, riving knife, push stick, fence and miter gauge Tool free guard and riving knife changes Single wrench blade change Kit includes (1) M18 FUEL™ 8-1/4" Table Saw w/ One-Key™ (2736-20) (1) Anti Kick Back Pawls (1) Blade (1) Blade Wrench (1) Guard (1) Miter Gauge (1) Riving Knife Technical Information Blade Size: 8-1/4" Height: 12" Length: 22" Tool Warranty: 5 Year Voltage: 18V Weight: 41.6 lbs Width: 22.5" Power Source: Cordless RPM: 6,300 Cut Depth at 90: 2-1/2" Cut Depth at 45: 1-3/4" Battery Type: 18V Lithium-Ion (NOT INCLUDED) Arbor Size: 5/8" Max Bevel: 47 Degrees Battery System: M18 Document Owner's Manual

Description The M18 FUEL™ 10 in. dual bevel sliding compound miter saw was designed to meet the demanding needs of professional carpenters and remodelers. Delivering greater capacity than many corded 10 in. sliding miter saws and the POWERSTATE brushless motor delivering corded cutting performance the 2734 provides users a solution to replace their corded miter saws. The REDLITHIUM XC 8.0 battery pack (NOT INCLUDED) delivers up to 400 cuts per charge making the saw capable of lasting an entire day on site with only one pack. Premium features like an adjustable stainless steel detent plate, cam locking miter system, easy access bevel adjustment lever and both a detent override lock and chop lock lever located on the front of the tool the M18 FUEL™ miter saw is designed for easy operation and repeatable, accurate cuts. ***BATTERY AND CHARGER ARE NOT INCLUDED Features Milwaukee® POWERSTATE™ Brushless Motor provides more power, more run-time, and longer life. The Milwaukee® REDLITHIUM™ Battery Pack (NOT INCLUDED) is the most durable pack on the market delivering more run-time, power and longer battery life. REDLINK PLUS™ Electronic Intelligence enables advanced communication between your batteries and tools, allowing for unmatched levels of performance, protection, and productivity. 5-3/4" Vertical Capacity (Base Board Against the Fence) 2x12 Horizontal Capacity (Laying Flat at 90°) 5-1/4" Vertical Capacity Nested Crown Cam Locking Miter System with Adjustable Stainless Steel Miter Detent Plate and 11 detent locations Dual Bevel with 9 detents and easy access bevel lever Shadow Cut Line Indicator for quickly lining up cuts Top and Side Carrying handles for maximum portability Detent Override for Easily Setting Miter Locations Outside of Detents Up to 400 Cuts per Charge Tall Sliding / Removable Fences to Support Large Base and Crown Against The Fence Easy Access Blade Change Kit Includes (1) M18 FUEL™ 10" Dual Bevel Sliding Compound Miter Saw (2734-20) (1) Carbide Tipped Blade (1) Blade Wrench (1) Clamp (1) Dust Bag Technical Information Tool Warranty: 5 Years Weight: 45 lbs Power Source: Cordless RPM: 4,000 Max Miter Capacity: 50 / 60 Vertical Capacity Against Fence: 5-3/4" Vertical Capacity Nested Crown: 5-1/4" 90 Cross Cut Capacity: 2 x 12 45 Miter Cross Cut Capacity: 2 x 8 45 Bevel Cut Capacity: 2 x 12 Maximum Bevel Capacity: 48 / 48 Battery System: M18 Document Owner's Manual

Description The M18 fuel 71/4 in. dual bevel sliding compound miter saw was designed for the demand needs of the professional carpenter and remodeler. Designed to increase productivity and efficiency on the jobsite, the 2733 combines the best in accuracy, portability and performance. Weighing in at only 28 lbs with battery, the 2733 is the lightest weight saw in its class. Dual bevel functionality provides users the most efficient and productive way make a variety of different cuts without flipping or turning the work piece. The combination of the POWERSTATE brushless motor and M18 REDLITHIUM XC5.0 battery delivers over 600 cuts per charge for all day runtime on a single charge. Features Only 28 lbs with Battery Dual Bevel with stops at 45° and 48° Over 600 Cuts per Charge 3-1/2” Vertical Capacity (base against fence) 2x8 Horizontal Capacity (lying flat at 90°) 3-5/8” Nested Crown Capacity Cam Locking Miter Detent System Shadow cut line indicator for quickly lining up cuts Integrated top and side carry handles for easy transportation Kit Includes (1) M18 FUEL™ 7-1/4” Dual Bevel Sliding Compound Miter Saw (Tool Only) (2733-20) (1) M18™ REDLITHIUM™ XC5.0 Extended Capacity Battery Pack (48-11-1850) (1) M18™ & M12™ Multi-Voltage Charger (48-59-1812) (1) Clamp (1) Carbide Tipped Blade (1) Blade Wrench Technical Information Tool Warranty 5 Years Voltage 18V Power Source Cordless Battery M18™ REDLITHIUM™ No Load RPM 5,000 Maximum Bevel Capacity 48 / 48 Weight with battery 28 lbs Battery System M18 Document Owner's Manual

Description Designed for the carpenter, remodeler and general contractor the M18 FUEL™ 71/4 in. circular saw from Milwaukee generates the power of a 15 A corded saw, cuts faster than a 15 A corded saw and gives users up to 750 cuts per charge. The POWERSTATE™ brushless motor provides 5,800 RPM and higher speeds under load for corded cutting performance. REDLINK Plus™ intelligence ensures maximum performance and protection from overload, overheating and over discharge. The M18 REDLITHIUM HIGH OUTPUT™ HD12.0 battery (NOT INCLUDED) delivers unmatched runtime in all applications. All magnesium guards and shoe delivers extreme durability for jobsite conditions. A built in rafter hook offers quick and easy storage and an electric brake stops the blade quickly after cuts are complete for maximum productivity. ***BATTERY AND CHARGER ARE NOT INCLUDED Features POWERSTATE™ Brushless Motor: Purposely built for the M18 FUEL™ 7-1/4" Circular Saw to provide the power and performance of a 15A corded circular saw. REDLINK PLUS™ Intelligence: Ensures optimal performance and provides overload protection to prevent damage to the tool and battery during heavy applications while still maintaining compatibility across the entire M18™ System. REDLITHIUM™ HIGH OUTPUT™ HD12.0 Battery Pack (NOT INCLUDED) : Provides 50% more power and runs 50% cooler versus standard REDLITHIUM™ HD packs. Superior pack construction provides the industry's best protection against jobsite conditions. Magnesium shoe and guards for maximum durability Integrated rafter hook for easy storage LED light for increased accuracy and visibility Integrated dust port on guard and included vac adaptor Electric brake to stop blade after trigger is released 2-1/2" Cut Depth Technical Information Blade Size: 7-1/4" Length: 13.75" Tool Warranty: 5 Year Voltage: 18V Weight: 12 lbs Power Source: Cordless RPM: 5,800 Cut Depth at 90: 2-1/2" Cut Depth at 45: 1-7/8" Arbor Size: 5/8" Max Bevel: 50 Degrees Battery System: M18 Document Owner's Manual

Description The M18 FUEL™ band saw cuts faster than its corded counterparts, provides the same legendary durability of a Milwaukee corded band saw, and delivers up to 2X more run time than other cordless options. Utilizing a POWERSTATE™ brushless motor and Constant Power Technology™, the M18 FUEL™ deep cut band saw cuts faster than corded band saws. It also delivers the same legendary durability that has made Milwaukee corded deep cut band saws second to none for decades by utilizing over 90% of the same parts. Equipped with Jobsite Armor Technology™, the tool is better protected from drops and debris with a proprietary composite material and crush zone barriers to absorb impacts. REDLITHIUM™ XC5.0 Battery technology provides up to 2.5X more runtime through superior pack construction, electronics, and more work per charge over the life of the battery than any competitive lithium ion battery on the market. REDLINK Plus™ intelligence has the most advanced system of cordless power tool electronics, providing optimized performance, electronic clutch, and overload protection using total system communication between tool, battery, and charger. The M18 FUEL™ deep cut band saw features a tool free locking adjustable shoe that can adjust from an extended shoe to no shoe in seconds. Other innovative features include a hanging hook for easy storage in between cuts, LED light to illuminate the cutting area, superior cut visibility, and a balanced body design that allows the tool to rest naturally and comfortably in the user’s hands. Features POWERSTATE™ Brushless Motor: Increased cutting speed and power through the toughest applications Dual-Actuation Trigger: Providing enhanced control and productivity CPT™ Constant Power Technology: Maintains cut speed in the toughest applications for optimal performance Over 90% same parts as Milwaukee’s Corded Deep Cut Band Saw Jobsite Armor Technology™: Proprietary composite material and crush zone barriers provide long lasting rugged protection REDLINK PLUS™ Intelligence: The most advanced system of cordless power tool electronics. Provides optimized performance and overload protection using total system communication between tool, battery and charger All metal direct drive: Delivers maximum tool life with all metal direct drive gearing system, while requiring less servicing than a chain drive REDLITHIUM™ XC5.0 Battery: Provides superior pack construction, more work per charge and more work over the life of the pack than competitive batteries Tool-Free locking adjustable shoe: Button actuated tool-free design allows user to quickly adjust from an extended shoe to no shoe in seconds Industry's largest cut capacity: Versatility to cut up to 5 in. by 5 in. material in one pass and adjustable shoe allows for less tool rotation when cutting material above 5 in. LED light: Illuminates work surface for increased accuracy and productivity Kit includes (1) M18 FUEL™ Deep Cut Band Saw (Tool Only) (2729-20) (2) M18™ REDLITHIUM™ XC5.0 Extended Capacity Battery Pack (48-11-1850) (1) M18™ & M12™ Multi-Voltage Charger (48-59-1812) Technical Information Length: 21" Tool Warranty: 5 Years Voltage: 18V Weight; 15 lbs Power Source: Cordless Warranty: 5 Year Limited Warranty Battery: M18™ REDLITHIUM™ Charger: M18™ and M12™ Multi-Voltage Charger Capacity: 5" X 5" Keyless Adjustable Shoe: Yes SFPM: 0-380 Blade Length: 44-7/8” x ½" x .020" Hang Hook: Yes Jobsite Armor Technology: Yes Battery System: M18 Document Owner's Manual

Description The M18 FUEL™ band saw cuts faster than its corded counterparts, provides the same legendary durability of a Milwaukee corded band saw and delivers up to 2X more run time than other cordless options. Utilizing a POWERSTATE™ brushless motor and Constant Power Technology™, the M18 FUEL™ deep cut band saw cuts faster than corded band saws. It also delivers the same legendary durability that has made Milwaukee corded deep cut band saws second to none for decades by utilizing over 90% of the same parts. Equipped with Jobsite Armor Technology™, the tool is better protected from drops and debris with a proprietary composite material and crush zone barriers to absorb impacts. REDLITHIUM™ XC5.0 Battery (NOT INCLUDED) technology provides up to 2.5X more runtime through superior pack construction, electronics, and more work per charge over the life of the battery than any competitive lithium ion battery on the market. REDLINK Plus™ intelligence has the most advanced system of cordless power tool electronics, providing optimized performance, electronic clutch, and overload protection using total system communication between tool, battery and charger. The M18 FUEL™ deep cut band saw features a tool free locking adjustable shoe that can adjust from an extended shoe to no shoe in seconds. Other innovative features include a hang hook for easy storage in between cuts, LED light to illuminate the cutting area, superior cut visibility, and a balanced body design that allows the tool to rest naturally and comfortably in the user’s hands. ***BATTERY AND CHARGER ARE NOT INCLUDED Features POWERSTATE™ Brushless Motor: Increased cutting speed and power through the toughest applications Dual-Actuation Trigger: Providing enhanced control and productivity CPT™ Constant Power Technology: Maintains cut speed in the toughest applications for optimal performance Over 90% same parts as Milwaukee’s Corded Deep Cut Band Saw Jobsite Armor Technology™: Proprietary composite material and crush zone barriers provide long lasting rugged protection REDLINK PLUS™ Intelligence: The most advanced system of cordless power tool electronics. Provides optimized performance and overload protection using total system communication between tool, battery and charger All metal direct drive: Delivers maximum tool life with all metal direct drive gearing system, while requiring less servicing than a chain drive REDLITHIUM™ XC5.0 Battery (NOT INCLUDED) : Provides superior pack construction, more work per charge and more work over the life of the pack than competitive batteries Tool-Free locking adjustable shoe: Button actuated tool-free design allows user to quickly adjust from an extended shoe to no shoe in seconds Industry's largest cut capacity: Versatility to cut up to 5 in. by 5 in. material in one pass and adjustable shoe allows for less tool rotation when cutting material above 5 in. LED light: Illuminates work surface for increased accuracy and productivity Technical Information Length: 21" Tool Warranty: 5 Years Voltage: 18V Weight; 15 lbs Power Source: Cordless Warranty: 5 Year Limited Warranty Battery: M18™ REDLITHIUM™ (NOT INCLUDED) Charger: M18™ and M12™ Multi-Voltage Charger (NOT INCLUDED) Capacity: 5" X 5" Keyless Adjustable Shoe: Yes SFPM: 0-380 Blade Length: 44-7/8” x ½" x .020" Hang Hook: Yes Jobsite Armor Technology: Yes Battery System: M18 Document Owner's Manual

Description The MILWAUKEE® M18 FUEL™ Compact Router combines power, speed and accurate depth adjustments to deliver clean accurate cuts in a variety of materials and applications. The compact router uses the POWERSTATE™ Brushless Motor and REDLINK PLUS™ electronics. This delivers the power of corded 1.25 horsepower trim routers and 31,000 RPM, giving the power and speed for clean, quality cuts in hard materials. With an M18™ REDLITHIUM™ XC5.0 battery (NOT INCLUDED) , the cordless compact router cuts up to 250ft of 3/8" round overs in red oak, providing all day run time with fewer trips to the charger. The handheld router has a micro adjust dial and macro adjust button, providing fast and accurate depth adjustments for highly accurate work. A variable speed dial with speed from 10,000 to 31,000 RPM delivers control in all applications. The compact router also features a sturdy 4" subbase plate for stability, and dual LED lights illuminate work surfaces. The M18 FUEL™ Compact Router is compatible with a plunge base and an offset base (sold separately) . ***BATTERY AND CHARGER ARE NOT INCLUDED Features POWERSTATE™ Brushless Motor: Power of corded compact routers and higher SPM to complete cuts in hard woods REDLINK PLUS™ Intelligence ensures maximum performance and protects from overloads, heating and over-discharge REDLITHIUM™ Battery Pack: Delivers more work per charge and more work over the life of the pack than competitors Variable speed dial ranges between 10,000 and 31,000 rpm, providing precise control for clean edges and details Macro Adjust button allows for fast macro-adjustments and 1.5" of adjustable range Fine adjustment screw allows for precise adjustments beyond 1/64" increments Tool-free spindle lock provides easy bit changes with one 11/16" collet wrench Accepts 1/4" Shank router bits LED light illuminates the cut surface Compatible with Milwaukee Plunge base and Offset base attachments (sold separately) Includes straight edge guide; dust extraction attachment and 5-3/4" sub-baseplate which accepts 1-1/4" template bushings Part of the M18 System, featuring over 200+ tools Kit Includes (1) M18 FUEL™ Compact Router (2723-20) (1) 1/4" Collet; 4" Round Sub-base Plate; (1) 5-3/4" Template Sub-base plate (1) 11/16" collet wrench (1) 7/16" Spindle wrench (1) Dust Shroud (1) Fixed Base (1) Straight Edge Guide Technical Information Height: 6.86" Length: 4.79" Weight: 2.95 lbs Width: 3.23" Power Source: Cordless Battery System: M18 Document Owner's Manual

Description The Milwaukee 2719 M18 FUEL™ HACKZALL® is the fastest cutting and most powerful onehanded reciprocating saw. Utilizing a POWERSTATE brushless motor and a best in class 7/8 in. stroke length, the M18 FUEL™ HACKZALL® cuts up to 50% faster than competitors. The compact, onehanded design provides superior control and the ability to make cuts in tight spaces. The dual gear counter balance mechanism provides up to 4x lower vibration than traditional reciprocating saws, resulting in faster cut starts in metal and reduced user fatigue. REDLINK PLUS intelligence ensures optimized performance and protects your investment from overload, overheating, and over discharge. The M18 REDLITHIUM XC5.0 battery pack provides more work per charge and more work over the life of the pack than competitive batteries. A rubber seal and weep holes provide superior protection against water and debris. Features Cuts up to 50% faster than competitive one-handed recip saws Up to 4x lower vibration for smooth cut starts & one-handed control Compact and lightweight design allows for easier cutting in tight spaces or overhead applications POWERSTATE™ Brushless Motor: Increased cutting speed and power through the toughest applications REDLINK™ Plus Intelligence: The most advanced system of cordless power tool electronics; provides optimized performance and overload protection using total system communication between tool, battery and charger REDLITHIUM™ battery technology: Superior pack construction, electronics and performance deliver more work per charge and more work over pack life than any battery on the market One-handed design provides superior control and versatility over standard reciprocating saws 7/8" stroke length removes more material with each stroke resulting in the faster cuts Pivoting shoe provides constant contact with the work-piece resulting in smoother cuts with less bucking and vibration REDLINK PLUS™ intelligence and POWERSTATE™ Brushless Motor combine to provide up to 3x longer tool life than competitive one-handed recips M18™ REDLITHIUM™ Battery packs, compatible with 125+ solutions Kit Includes (1) M18 FUEL™ Hackzall® Kit (2719-21) (1) M18 XC5.0 REDLITHIUM Battery Pack (1) M18/M12 Multi-Voltage Charger (1) Contractor's Bag Technical Information Height: 7" Length: 14" Weight: 4.07 lbs Width: 3.31" Power Source: Cordless Compatible Batteries: 48-11-1815; 48-11-1820; 48-11-1828; 48-11-1840; 48-11-1850; 48-11-1860; 48-11-1890 Compatible Chargers: 2710-20; 48-59-1812; 48-59-1808; 48-59-1807; Battery System: M18 Document Owner's Manual

Description The Milwaukee 2719 M18 FUEL™ HACKZALL® is the fastest cutting and most powerful onehanded reciprocating saw. Utilizing a POWERSTATE brushless motor and a best in class 7/8 in. stroke length, the M18 FUEL™ HACKZALL® cuts up to 50% faster than competitors. The compact, onehanded design provides superior control and the ability to make cuts in tight spaces. The dual gear counter balance mechanism provides up to 4x lower vibration than traditional reciprocating saws, resulting in faster cut starts in metal and reduced user fatigue. REDLINK PLUS intelligence ensures optimized performance and protects your investment from overload, overheating, and over discharge. The M18 REDLITHIUM XC5.0 battery pack (NOT INCLUDED) provides more work per charge and more work over the life of the pack than competitive batteries. A rubber seal and weep holes provide superior protection against water and debris. ***BATTERY AND CHARGER ARE NOT INCLUDED Features Cuts up to 50% faster than competitive one-handed recip saws Up to 4x lower vibration for smooth cut starts & one-handed control Compact and lightweight design allows for easier cutting in tight spaces or overhead applications POWERSTATE™ Brushless Motor: Increased cutting speed and power through the toughest applications REDLINK™ Plus Intelligence: The most advanced system of cordless power tool electronics; provides optimized performance and overload protection using total system communication between tool, battery and charger REDLITHIUM™ battery technology: Superior pack construction, electronics and performance deliver more work per charge and more work over pack life than any battery on the market One-handed design provides superior control and versatility over standard reciprocating saws 7/8" stroke length removes more material with each stroke resulting in the faster cuts Pivoting shoe provides constant contact with the work-piece resulting in smoother cuts with less bucking and vibration REDLINK PLUS™ intelligence and POWERSTATE™ Brushless Motor combine to provide up to 3x longer tool life than competitive one-handed recips M18™ REDLITHIUM™ Battery packs, compatible with 125+ solutions (NOT INCLUDED) Technical Information Height: 7" Length: 14" Weight: 4.07 lbs Width: 3.31" Power Source: Cordless Compatible Batteries: 48-11-1815; 48-11-1820; 48-11-1828; 48-11-1840; 48-11-1850; 48-11-1860; 48-11-1890 (NOT INCLUDED) Compatible Chargers: 2710-20; 48-59-1812; 48-59-1808; 48-59-1807; (NOT INCLUDED) Battery System: M18 Document Owner's Manual

Description The Milwaukee® M18 FUEL™ 13/4 in. SDS max rotary hammer w/ ONEKEY™ has the power of a 15 A corded rotary hammer with a 13/4 in. capacity, 8.1 ftlbs of impact energy, 380 RPM, and 2,900 BPM. The cordless rotary hammer is designed for the professional user, allowing ultimate power, control, safety, and productivity. The POWERSTATE™ brushless motor delivers 8.1 ftlbs of impact energy. REDLINK Plus™ intelligence tool technology ensures maximum performance and protects it from overload, overheating, and over discharge. The M18 REDLITHIUM™ HIGH OUTPUT™ HD12.0 battery delivers unmatched runtime. It allows the SDSMax hammer drill to chip 1/2 ton of material per charge, working harder for longer. The full feature hammer delivers maximum control and enhanced safety with the AUTOSTOP™ EClutch. This prevents overrotation in case the tool gets bound up while being used in drilling rebar or hard aggregate applications. Competitive tools can rotate up to 360 degrees while the Milwaukee rotary hammer will stop rotating at 45 degrees. This ensures users work safer and have more control while on the job. The cordless rotary hammer is compatible with ONEKEY™, wirelessly connecting to smart phones to track and manage the tool performance and location. ONEKEY™ integrated tool tracking gives full visibility over how and where tools are being used across a network of jobs and users. Features Milwaukee® POWERSTATE™ Brushless Motor provides more power, more run-time, and longer life REDLINK PLUS™ Electronic Intelligence enables advanced communication between your batteries and tools, allowing for unmatched levels of performance, protection, and productivity. REDLITHIUM™ HIGH OUTPUT™ HD12.0 Battery Pack: Provides 50% more power and runs 50% cooler versus standard REDLITHIUM™ HD packs. Superior pack construction provides the industry's best protection against jobsite conditions. Generates 15A Corded Power Max Control, Enhanced Safety Chips 1/2 Ton of Material Per Charge One Key™ 8.1 ft-lbs Impact Energy 380 RPM 2,900 BPM AUTOSTOP™ E-Clutch 10 m/s² Vibration 2 Modes: Rotary Hammer & Hammer Only Kit Includes (1) M18 FUEL™ 1-3/4” SDS Max Rotary Hammer w/ ONE KEY™ (Tool Only) (2718-20) (2) M18 REDLITHIUM™ HIGH OUTPUT™ HD12.0 Battery Pack (48-11-1812) (1) M18™ & M12™ Rapid Charger (48-59-1808) (1) Carrying Case (1) Grease Tube (1) Side Handle Technical Information Height 16.4" Length 21.02" Tool Warranty 5 Years Voltage 18V Weight 19.7 lbs Width 6.4" Power Source Cordless Warranty 5 Year Limited Warranty RPM 380 Impact Energy 8.1 ft-lbs BPM 2900 Battery System M18 Document Owner's Manual

Description The MILWAUKEE® M18 FUEL™ 19/16” SDS Max Rotary Hammer is the first to world 18V SDS Max cordless solution. By utilizing proprietary M18™ and M18 FUEL™ technologies, the 19/16” SDS Max rotary hammer is able to drill as fast as a corded SDS Max rotary hammer, deliver corded durability, and provide over 20 minutes of continuous chipping. POWERSTATE™ Brushless Motor delivers 5 ftlbs of impact energy for the more demanding, heavy duty applications. Including dry coring and medium duty chipping in both concrete block and reinforced concrete. Powered by the M18™ REDLITHIUM™ HIGH OUTPUT™ XC8.0 battery pack which provides 50% more power and runs 50% cooler compared to M18™ REDLITHIUM™ XC battery packs, the 19/16” SDS Max rotary hammer delivers over 20 minutes of continuous chipping. It also includes REDLINK PLUS™ Intelligence, the most advanced electronic system on the market, to prevent damage to the tool and battery from overloading and overheating. The M18 FUEL™ 19/16” SDS Max Rotary Hammer is part of Milwaukee’s complete cordless rotary hammer solution, ranging from SDS Plus to SDS Max, all powered by the M18™ REDLITHIUM™ batteries. Features Milwaukee® POWERSTATE™ Brushless Motor provides more power, more run-time, and longer life. The Milwaukee® REDLITHIUM™ Battery Pack is the most durable pack on the market delivering more run-time, power and longer battery life. REDLINK PLUS™ Electronic Intelligence enables advanced communication between your batteries and tools, allowing for unmatched levels of performance, protection, and productivity. Kit Includes (1) M18 FUEL™ 1-9/16" SDS Max Hammer Drill (Tool Only) (2717-20) (2) M18™ REDLITHIUM HIGH OUTPUT™ XC8.0 Battery (48-11-1880) (1) M18™ & M12™ Multi-Voltage Charger (48-59-1812) Technical Information Height: 10.1." Length: 18.75" Tool Warranty: 5 Years Voltage: 18V Weight: 12.15 lbs Width: 3.0" Power Source: Cordless Warranty: 5 Year Limited Warranty No Load RPM: 0-450 Blow Energy: 5.1 ft-lbs BPM: 0 - 3,000 Solid Bit Capacity: 1-9/16" Handle Style: D-Handle Battery System: M18 Document Owner's Manual

Description The MILWAUKEE® M18 FUEL™ 19/16” SDS Max Rotary Hammer is the first to world 18V SDS Max cordless solution. By utilizing proprietary M18™ and M18 FUEL™ technologies, the 19/16” SDS Max rotary hammer is able to drill as fast as a corded SDS Max rotary hammer, deliver corded durability, and provide over 20 minutes of continuous chipping. POWERSTATE™ Brushless Motor delivers 5 ftlbs of impact energy for the more demanding, heavy duty applications. Including dry coring and medium duty chipping in both concrete block and reinforced concrete. ***BATTERY AND CHARGER ARE NOT INCLUDED Features Milwaukee® POWERSTATE™ Brushless Motor provides more power, more run-time, and longer life. The Milwaukee® REDLITHIUM™ Battery Pack (NOT INCLUDED) is the most durable pack on the market delivering more run-time, power and longer battery life. REDLINK PLUS™ Electronic Intelligence enables advanced communication between your batteries and tools, allowing for unmatched levels of performance, protection, and productivity. Technical Information Height: 10.1." Length: 18.75" Tool Warranty: 5 Years Voltage: 18V Weight: 12.15 lbs Width: 3.0" Power Source: Cordless Warranty: 5 Year Limited Warranty No Load RPM: 0-450 Blow Energy: 5.1 ft-lbs BPM: 0 - 3,000 Solid Bit Capacity: 1-9/16" Handle Style: D-Handle Battery System: M18 Document Owner's Manual

Description The 2697-22CT M18™ cordless 2tool Combo kit includes the M18™ 1/2 in. hammer drill driver (2607-20) and the M18™ 1/4 in. hex compact impact driver (2656-20). The M18™ cordless system's patented technologies and electronics, innovative motor design, and superior ergonomics provide the most efficient blend of power, weight and performance in the industry. Powered by Red Lithium™ the M18™ cordless system delivers more torque, more power, and longer runtime than the competition. Kit Includes (1) M18™ Compact 1/2" Hammer Drill/Driver (Tool Only) (2607-20) (1) M18™ 1/4" Hex Impact Driver (Tool Only) (2656-20) (1) M18™ Compact REDLITHIUM™ Battery (48-11-1815) (1) M18™ & M12™ Multi-Voltage Charger (48-59-1812)

Description The 2691 22 M18™ cordless lithium ion 2tool Combo kit includes the compact driver (2601-20) and the 1/4 in. hex impact driver (2650-20). The M18™ cordless lithium ion system's patented technologies and electronics, innovative motor design, and superior ergonomics provide the most efficient blend of power, weight and performance in the industry. Powered by RED LITHIUM™, the M18 cordless lithium-ion system delivers more torque, more power, and longer runtime than the competition. Kit Includes (1) M18™ Compact 1/2" Drill Driver (2606-20) (1) M18™ 1/4" Hex Impact Driver (2656-20) (1) M18™ Compact REDLITHIUM™ Battery (48-11-1815) (1) M18™ & M12™ Multi-Voltage Charger (48-59-1812)

Description The M18™ Force Logic™ 600 MCM crimper is the most accurate way to crimp producing cULus classified crimps according to the UL 486AB classification standards for #8 600 MCM Cu and #8350 MCM dual rated Anderson, Blackburn®, Burndy, Ilsco, Panduit, Penn Union and Thomas & Betts connectors. Utilizing Milwaukee U style dies that feature vivid wire size markings, industry standard color markings and imprint wire size onto the connector after crimp completion, commercial electricians benefit from its ease of use and easy inspection. A new jaw design holds the connector for instant alignment and predictive force monitoring (PFM™) ensures proper pressure is reached on every crimp. PFM™ actively measures pressure and automatically modifies all performance levels of the system allowing the high speed hydraulic pump to power through the beginning of a cycle and land at precisely the right pressure, protecting internal components, to complete the crimp. The result, Milwaukee® crimpers are the most accurate, fastest and most durable crimpers in the world. Featuring Milwaukee® ONEKEY™ Technology, Milwaukee® crimpers enable you to store real time crimp data, generate professional reports, view historical tool performance data and sync it all wirelessly to the cloud for easy access. Features Find the most updated UL Classification Matrix in the Operators Manual LED light provides instant pressure verification Designed for use in temperatures between 0-122 degrees F Provides fastest crimp time in the industry Proprietary jaw alignment system: holds connector for instant alignment PFM (Predictive Force Monitoring): ensures optimal pressure every time PFM (Predictive Force Monitoring): delivers fastest crimp time in the industry Receive instant pressure verification: green light delivers peace of mind Tool records and stores every crimp made, One-Key enabled for professional report building In-line design and 350 degree head rotation: easy access in the tightest panels Weather protected electronics keep dirt, dust and moisture out Hydraulic system is optimized for consistent performance from 0°F - 122°F Compatible with all M18 batteries Kit Includes (1) M18™ FORCE LOGIC™ 600 MCM Crimper (2) M18™ REDLITHIUM™ CP2.0 Battery (48-11-1820) (1) M18™ & M12™ Multi-Voltage Charger (48-59-1812) (1) Carrying Case Technical Information Length 14" Tool Warranty 5 Years Weight 4.65 lbs Power Source Cordless Warranty 5 Year Limited Warranty Battery Lithium-Ion Head Rotation 350 degrees Crimp Speed 2.9 Secs Auto Reset Yes Balanced Center Grip Yes Adapative Pressure Control System Yes Reporting and Tool Diagnostics Built In – ONE KEY™ Enabled Full Pressure Indicator Yes Battery Warranty 2 Year Battery System M18 Document Owner's Manual