Tools

Description The MILWAUKEE® M18 FUEL™ 8” Metal Cutting Circular Saw generates 15A corded power, faster cuts than corded circular saws, and delivers up to 120’ of cutting corrugated decking per charge. The POWERSTATE™ Brushless Motor provides 4,000 RPM for faster cutting and REDLINK PLUS™ Intelligence ensures maximum performance, and protection from overload, overheating and over discharge. The M18™ REDLITHIUM™ HIGH OUTPUT™ XC8.0 battery (not included) delivers 50% more power and runs 50% cooler than M18™ REDLITHIUM™ XC Batteries while still being fully compatible across the M18™ platform. This circular saw has a cut capacity of 29/16” for tackling demanding applications at a larger capacity than any previous cordless metal cutting circular saws. Features POWERSTATE™ Brushless Motor: Purposely built for the M18 FUEL™ 8" Metal Cutting Circular Saw to generate the power and performance of a 15A Corded Metal Cutting Circular Saw REDLINK PLUS™ Intelligence: Most advanced system of electronics in the industry, enabling communication between batteries and tools, allowing for unmatched levels of performance, protection, and compatibility. REDLITHIUM™ HIGH OUTPUT™ Battery Pack (Not Included) : Provides 50% more power and runs 50% cooler versus standard REDLITHIUM™ Battery. Superior pack construction, electronics and performance deliver more work per charge and more work over pack lifespan than any battery on the market. Blade Cut Capacity: 2-9/16" Onboard Chip Collection Overload Indicator Light Dual Action Trigger Electric Blade Brake Cuts 120' of Decking Per Charge Adjustable Depth 5-Year Limited Warranty Compatible with all M18™ Batteries (not included) Technical Information Height: 10.1" Length: 15.5" Weight: 12.1lbs Width: 10.6" Power Source: Cordless Battery System: M18 Document Owner's Manual

Description The MILWAUKEE® M18 FUEL™ 1/2" Mid Torque Impact Wrench w/ Pin Detent delivers the best power to weight ratio, most access in tight spaces, and faster removal speed. It provides 650 ftlbs of nut busting torque and only weighs 5.1 lbs, making it extremely versatile, capable of performing a wide variety of applications. Its POWERSTATE™ Brushless Motor generates the power needed to quickly perform many tasks, such as removing large bolts or lug nuts. This battery powered impact wrench is the most compact in its class, allowing access to stubborn fasteners in spaces where larger impact wrenches can’t fit without needing to disassemble components to reach bolts. TriLEDs surround the anvil to deliver brighter light with fewer shadows. 4Mode DRIVE CONTROL™ offers greater precision with a range of preset RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUTOFF™ control applies no more than 35 ftlbs of torque for hand tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control that delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. REDLINK PLUS™ Intelligence ensures maximum performance, protecting the tool against overloads, overheating, and over discharge. The M18™ REDLITHIUM™ battery pack (NOT INCLUDED) fits M18™ tools, delivering more work per charge and more work over the life of the pack. ***BATTERY AND CHARGER ARE NOT INCLUDED Features Pin detent locks sockets in place securely, especially while working overhead 6.0" in length provides most access in tight spaces The POWERSTATE™ brushless motor delivers up to 550 ft-lbs. of max fastening torque Tri-LEDs deliver high definition lighting to increase workspace visibility with less shadows 4-Mode DRIVE CONTROL™ provides greater control over output speed and power. Includes auto shut-off and bolt-removal control AUTO SHUT-OFF™ control applies no more than 35 ft-lbs of torque for hand-tight fastening applications to prevent overtightening Bolt Removal control delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops Mode 1 RPMs: 0-1,250; Mode 2 RPMs: 0-1,950; Mode 3 RPMs: 0-2,575; Mode 4 RPMs: 0-2,575 Mode 1 IPMs: 0-900; Mode 2 IPMs: 0-2,100; Mode 3 IPMs: 0-3,100; Mode 4 IPMs: 0-3,100 REDLINK PLUS™ Intelligence ensures maximum performance and protects from overloads, heating and over-discharge Works in up to to 69kV environments Compatible with all M18™ batteries & Chargers (NOT INCLUDED) Technical Information Height: 8.12" Length: 6" Weight: 3.5 lbs Width: 2.74" Power Source: Cordless Nut Busting Torque: 650 (ft-lbs) Fastening Torque: 550 (ft-lbs) Anvil Type: 1/2" Square w/ Friction Ring Battery System: M18 Document Owner's Manual

Description The Milwaukee® M18™ cable stripper kit for CU THHN / XHHW vastly improves the cable stripping experience. With no exposed blades, the cordless cable stripper provides safer stripping than with a knife. The cable stripper's compact, right angle design enables users to maneuver it more easily in tight spaces with less strain on the wrist. The bushing design and adjustable depth gauge deliver cleaner, more accurate and consistent strips across all sizes. The cable jacket stripping tool is not only compatible with all Milwaukee bushings but is also compatible with competitive quick change bushings. In addition to the battery powered stripper, this kit contains 11 bushings for Copper THHN and XHHW cables, one M18™ compact REDLITHIUM™ battery, an M18™ & M18™ multi voltage charger, and a carrying case. Features Protects against Knife Injuries on the Job Depth Gauge Adjustment up to 3" for Accurate, Consistent Strips Compact Head, Internal Depth Gauge for Easy Access Optimized Bushing Design Prevents Nicks Variable Speed Trigger for Controlled Strips Ability to Strip in Crowded Panels and Switch Gears Quick-Change Bushing System for Faster Stripping Across Sizes Strips 1/0 - 500 MCM Cu RHW/RHH/USE Cable Compatible with All M18™ Batteries Kit Includes (1) M18™ Cable Stripper (Tool-Only) (2935-20) (1) 1/0 AWG Cu THHN/ XHHW Bushing (49-16-B01AC) (1) 2/0 AWG Cu THHN/ XHHW Bushing (49-16-B02AC) (1) 3/0 AWG Cu THHN/ XHHW Bushing (49-16-B03AC) (1) 4/0 AWG Cu THHN/ XHHW Bushing (49-16-B04AC) (1) 250 MCM Cu THHN/ XHHW Bushing (49-16-B250C) (1) 300 MCM Cu THHN/ XHHW Bushing (49-16-B300C) (1) 350 MCM Cu THHN/ XHHW Bushing (49-16-B350C) (1) 400 MCM Cu THHN/ XHHW Bushing (49-16-B400C) (1) 500 MCM Cu THHN/ XHHW Bushing (49-16-B500C) (1) 600 MCM Cu THHN/ XHHW Bushing (49-16-B600C) (1) 750 MCM Cu THHN/ XHHW Bushing (49-16-B750C) (1) M18™ Compact REDLITHIUM™ Battery (48-11-1815) (1) M18™ & M12™ Multi-Voltage Charger (48-59-1812) (1) Carrying Case Technical Information Height: 11.335" Length: 8.46" Weight: 3.85 lbs Width: 2.76" Power Source: Cordless Battery System: M18 Document Owner's Manual

Description The Milwaukee® M18™ cable stripper kit for Al THHN / XHHW vastly improves the cable stripping experience. With no exposed blades, the cordless cable stripper provides safer stripping than with a knife. The cable stripper's compact, right angle design enables users to maneuver it more easily in tight spaces with less strain on the wrist. The bushing design and adjustable depth gauge deliver cleaner, more accurate and consistent strips across all sizes. The cable jacket stripping tool is not only compatible with all Milwaukee bushings but is also compatible with competitive quick change bushings. In addition to the battery powered stripper, this kit contains 11 bushings for aluminum THHN and XHHW cables, one M18™ compact REDLITHIUM™ battery, an M18™ & M18™ multi voltage charger, and a carrying case. Features Protects against Knife Injuries on the Job Depth Gauge Adjustment up to 3" for Accurate, Consistent Strips Compact Head, Internal Depth Gauge for Easy Access Optimized Bushing Design Prevents Nicks Variable Speed Trigger for Controlled Strips Ability to Strip in Crowded Panels and Switch Gears Quick-Change Bushing System for Faster Stripping Across Sizes Strips 1/0 - 750 MCM Al THHN/XHHW Cable Compatible with All M18™ Batteries Kit Includes (1) M18™ Cable Stripper (Tool-Only) (2935-20) (1) 1/0 AWG Al THHN/ XHHW Bushing (49-16-B01A) (1) 2/0 AWG Al THHN/ XHHW Bushing (49-16-B02A) (1) 3/0 AWG Al THHN/ XHHW Bushing (49-16-B03A) (1) 4/0 AWG Al THHN/ XHHW Bushing (49-16-B04A) (1) 250 MCM Al THHN/ XHHW Bushing (49-16-B250) (1) 300 MCM Al THHN/ XHHW Bushing (49-16-B300) (1) 350 MCM Al THHN/ XHHW Bushing (49-16-B350) (1) 400 MCM Al THHN/ XHHW Bushing (49-16-B400) (1) 500 MCM Al THHN/ XHHW Bushing (49-16-B500) (1) 600 MCM Al THHN/ XHHW Bushing (49-16-B600) (1) 750 MCM Al THHN/ XHHW Bushing (49-16-B750) (1) M18™ Compact REDLITHIUM™ Battery (48-11-1815) (1) M18™ & M12™ Multi-Voltage Charger (48-59-1812) (1) Carrying Case Technical Information Height: 11.335" Length: 8.46" Weight: 3.85 lbs Width: 2.76" Power Source: Cordless Battery System: M18 Document Owner's Manual

Description The Milwaukee® M18™ cable stripper vastly improves the cable stripping experience. With no exposed blades, the cordless cable stripper provides safer stripping than with a knife. The cable stripper's compact, right angle design enables users to maneuver it more easily in tight spaces with less strain on the wrist. The bushing design and adjustable depth gauge deliver cleaner, more accurate and consistent strips across all sizes. The cable jacket stripping tool is not only compatible with all Milwaukee bushings but is also compatible with competitive quick change bushings. Features Protects against Knife Injuries on the Job Depth Gauge Adjustment up to 3" for Accurate, Consistent Strips Compact Head, Internal Depth Gauge for Easy Access Optimized Bushing Design Prevents Nicks Variable Speed Trigger for Controlled Strips Ability to Strip in Crowded Panels and Switch Gears Quick-Change Bushing System for Faster Stripping Across Sizes Strips 1/0 - 750 MCM Cu & Al THHN/XHHW Cable Strips 1/0 - 500 MCM Cu RHW/RHH/USE Cable Compatible with All M18™ Batteries Technical Information Height: 11.335" Length: 8.46" Weight: 3.85 lbs Width: 2.76" Power Source: Cordless Battery System: M18 Document Owner's Manual

Description The MILWAUKEE® HAMMERVAC™ 1 in. Dedicated Dust Extractor (2912-DE) features an inline design engineered to connect directly to and be power by the M18 FUEL™ 1 in. SDS Plus Rotary Hammer (2912-20 and 2914-20) (NOT INCLUDED) . Utilizing the same replaceable certified HEPA filter as other HAMMERVACS™, which filters 99.97% of all particles greater than 0.3µm, means more compatibility on the jobsite. The built-in adjustable depth stop and ruler offers easy and precise adjustments. The dust extractor allows full OSHA Table One Compliance when drilling up to 1 in. diameter and 6 in. in depth. This extractor features our AUTOPULSE™ Filter Cleaning Mechanism that automatically cleans the filter after each use, ensuring more effective drilling for longer before needing to empty the dust box. The dust box comes equipped with a vacuum port that allows for suctioning out the dust with a large vacuum or dust extractor (such as the 8960-20) instead of dumping the dust out into a trash receptacle, ensuring minimal exposure. **** ROTARY HAMMER, BATTERY AND CHARGER ARE NOT INCLUDED Features Incudes Large and Small Dust Nozzles HEPA Filter Included Pairs with 2912-20 and 2914-20 Rotary Hammers Translucent box to see dust levels Small Nozzle for drilling up to 5/8" holes Large Nozzle for drilling up to 1" holes captures 99.97% of all particles greater than 0.3 microns Will not work without HEPA filter Extra HEPA Filters Available Document Owner's Manual

Description The MILWAUKEE® M18 FUEL™ 1 in. SDS Plus Rotary Hammer with Dust Extractor Kit is the next generation of cordless rotary hammer drills delivering ultimate jobsite performance and productivity. The M18 FUEL™ 1 in. SDS Plus Rotary Hammer is the fastest drilling rotary hammer in its class, includes AUTOSTOP™ Control for enhanced safety, and can drill up to (125) 3/8 in. x 2 in. holes per charge when paired with the M18™ HIGH OUTPUT™ XC6.0 Battery. This hammer drill provides maximum control and enhanced safety with the AUTOSTOP™ Kickback Control, which prevents over rotation if the tool gets bound up while drilling in rebar or hard aggregate. The Milwaukee HAMMERVAC™ 1 in. Dedicated Dust Extractor features an inline design engineered to connect directly to and be power by the M18 FUEL™ 1 in. SDS Plus Rotary Hammer. Utilizing the same replaceable certified HEPA filter as other HAMMERVACS™, which filters 99.97% of all particles greater than 0.3µm, means more compatibility on the jobsite. The built in adjustable depth stop and ruler offer easy and precise adjustments. This dust extractor has OSHA Table One Compliance when drilling up to 1" in diameter and 6" in depth. This extractor features AUTOPULSE™ Filter Cleaning Mechanism that automatically cleans the filter after each use. The dust box comes equipped with a vacuum port for suctioning out the dust with a large vacuum or dust extractor instead of dumping the dust out into a trash receptacle. Features POWERSTATE™ BRUSHLESS MOTOR REDLINK PLUS™ Intelligence: Integrates full-circle communication between tool, battery and charger to protect from overloading, overheating, and over-discharging The M18™ REDLITHIUM™ HIGH OUTPUT™ XC6.0 Battery Pack provides 50% more power and runs 50% cooler vs M18™ REDLITHIUM™ XC battery packs 3 Mode: Rotary Hammer, Hammer Only, Rotary Only 2 ft-lbs Impact Energy AVS Anti-Vibration Systems 1,330 RPM 4,800 BPM Part of the M18™ System featuring over 200 tools Kit Includes (1) M18 FUEL 1" SDS Plus Rotary Hammer (2912-20) (2) M18 REDLITHIUM™ HIGH OUTPUT™ XC6.0 Battery Pack (48-11-1865) (1) M18™ & M12™ Rapid Charger (48-59-1808) (1) M18 FUEL™ HAMMERVAC™ 1" Dedicated Dust Extractor (2912-DE) Technical Information Length: 11.5” Tool Warranty: 5 years Voltage: 18V Weight: 6.8 lbs Power Source: Cordless No Load Speed: 1330 RPM Blow Energy: 2 ft-lbs BPM: 4800 Solid Bit Capacity: 3" Drilling Mode: 3-Mode: Rotary Hammer, Hammer Only, Rotation Only Handle Style: Drop_Motor Vibration: AVS™ Anti-Vibration System Battery System: M18 Document Owner's Manual

Description The MILWAUKEE® M18 FUEL™ 1" SDS Plus Rotary Hammer is the next generation of cordless rotary hammers delivering ultimate jobsite performance and productivity. The M18 FUEL™ 1" SDS Plus Rotary Hammer is the fastest drilling rotary hammer in its class, includes AUTOSTOP™ Control for enhanced safety, and can drill up to (125) 3/8" x 2" holes per charge when paired with the M18™ HIGH OUTPUT™ XC6.0 Battery. (NOT INCLUDED) The POWERSTATE™ Brushless Motor delivers 2 ftlbs of impact energy, 1,330 RPM, and 4,800 BPM, providing speed and power in the most demanding applications. REDLINK PLUS™ intelligence tool technology ensures maximum rotary drill performance and protects it from overload, overheating, and over discharge. The M18™ REDLITHIUM™ HIGH OUTPUT™ XC6.0 Battery delivers 50% more power while running 50% cooler than the M18™ REDLITHIUM™ XC batteries .(NOT INCLUDED) This hammer provides maximum control and enhanced safety with the AUTOSTOP™ Kickback Control. This feature prevents over rotation if the tool gets bound up while drilling in rebar or hard aggregate. Milwaukee's AVS Anti Vibration System minimizes vibration for maximum comfort. ****BATTERY AND CHARGER ARE NOT INCLUDED Features POWERSTATE™ BRUSHLESS MOTOR REDLINK PLUS™ Intelligence: Integrates full-circle communication between tool, battery and charger to protect from overloading, overheating, and over-discharging The M18™ REDLITHIUM™ HIGH OUTPUT™ XC6.0 Battery Pack provides 50% more power and runs 50% cooler vs M18™ REDLITHIUM™ XC battery packs (NOT INCLUDED) 3 Mode: Rotary Hammer, Hammer Only, Rotary Only 2 ft-lbs Impact Energy AVS Anti-Vibration Systems 1,330 RPM 4,800 BPM Part of the M18™ System featuring over 200 tools Technical Information Length: 11.5” Tool Warranty: 5 years Voltage: 18V Weight: 6.8 lbs Power Source: Cordless No Load Speed: 1330 RPM Blow Energy: 2 ft-lbs BPM: 4800 Solid Bit Capacity: 3" Drilling Mode: 3-Mode: Rotary Hammer, Hammer Only, Rotation Only Handle Style: Drop_Motor Vibration: AVS™ Anti-Vibration System Battery System: M18 Document Owner's Manual

Description The MILWAUKEE® M18 FUEL™ 41/2" / 5" Braking Grinder with ONEKEY™ Paddle Switch, No Lock is the next advancement in power and performance of cordless grinders while enhancing safety with its RAPIDSTOP™ Brake. The M18 FUEL™ 41/2" / 5" Braking Grinder with ONEKEY™ generates 11A corded power to complete the toughest grinding and cutting applications. The POWERSTATE™ Brushless Motor delivers maximum sustained power and 8,500 RPM to remove material faster and increase productivity. REDLINK PLUS™ Intelligence ensures unmatched levels of performance, protection, and compatibility. The RAPIDSTOP™ Brake provides stop times under 2 seconds with an abrasive disc. This battery powered grinder includes an electronic clutch for kickback protection, as well as overload protection to maximize motor life. Compatible with ONEKEY™, this grinder wirelessly connects to a smartphone to track and manage the tool, providing visibility to where tools are across a network of jobs. The included M18™ REDLITHIUM™ HIGH OUTPUT™ XC6.0 Batteries deliver 50% more power while running 50% cooler than the M18™ REDLITHIUM™ XC Batteries. Experience faster accessory changes, and less downtime with tool free accessory and guard adjustments, while remaining fully compatible with the most common accessories in the market. The M18 FUEL™ 41/2" / 5" Braking Grinder with ONEKEY™ is the next level of jobsite productivity and enhanced safety in cordless grinders. Features POWERSTATE™ Brushless Motor: Purposely built for the M18 FUEL™ 4-1/2" / 5" Braking Grinder with ONE-KEY™ delivers 8,500 RPM to provide the power to complete the toughest grinding and cutting applications. REDLINK PLUS™ Intelligence: Most advanced system of electronics in the industry, enabling communication between batteries and tools, allowing for unmatched levels of performance, protection, and compatibility. REDLITHIUM™ HIGH OUTPUT™ Battery Pack (Not Included): Provides 50% more power and runs 50% cooler versus standard REDLITHIUM™ Battery. Superior pack construction, electronics and performance deliver more work per charge and more work over pack lifespan than any battery on the market. Includes a RAPIDSTOP™ Brake, to quickly stop accessories and Enhance Safety Paddle Switch Design for Increased Comfort and Ease-Of-Use when Operating in Various Positions Tool-Free Guard Adjustment for faster guard installations and adjustments Tool-Free Accessory Changes with Integrated FIXTEC Nut Technology Electronic Clutch for Kickback Protection 5/8"-11 Spindle for Use with Common Grinding Accessories Overload Protection to Maximize Motor Life Anti-Vibration Side Handle for Increased User Comfort and Safety ONE-KEY™ Tracking and Tool Management Compatible with all M18™ Batteries Kit Includes (1) M18 FUEL™ 4-1/2" / 5" Braking Grinder w/ ONE-KEY™ Paddle Switch, No Lock (2882-20) (2) M18 REDLITHIUM™ HIGH OUTPUT™ XC6.0 Battery Pack (48-11-1865) (1) M18™ & M12™ Rapid Charger (48-59-1808) (1) Spanner Wrench (1) T27 Guard (1) T1 Clip-On Guard (1) Side Handle (1) Back Flange (1) Flange Nut Document Owner's Manual

Description The MILWAUKEE® M18 FUEL™ 41/2" / 5" Braking Grinder with ONEKEY™ Paddle Switch, No Lock is the next advancement in power and performance of cordless grinders while enhancing safety with its RAPIDSTOP™ Brake. The M18 FUEL™ 41/2" / 5" Braking Grinder with ONEKEY™ generates 11A corded power to complete the toughest grinding and cutting applications. The POWERSTATE™ Brushless Motor delivers maximum sustained power and 8,500 RPM to remove material faster and increase productivity. REDLINK PLUS™ Intelligence ensures unmatched levels of performance, protection, and compatibility. The RAPIDSTOP™ Brake provides stop times under 2 seconds with an abrasive disc. This battery powered grinder includes an electronic clutch for kickback protection, as well as overload protection to maximize motor life. Compatible with ONEKEY™, this grinder wirelessly connects to a smartphone to track and manage the tool, providing visibility to where tools are across a network of jobs. Experience faster accessory changes, and less downtime with tool free accessory and guard adjustments, while remaining fully compatible with the most common accessories in the market. The M18 FUEL™ 41/2" / 5" Braking Grinder with ONEKEY™ is the next level of jobsite productivity and enhanced safety in cordless grinders. ***BATTERY AND CHARGER ARE NOT INCLUDED Features POWERSTATE™ Brushless Motor: Purposely built for the M18 FUEL™ 4-1/2" / 5" Braking Grinder with ONE-KEY™ delivers 8,500 RPM to provide the power to complete the toughest grinding and cutting applications. REDLINK PLUS™ Intelligence: Most advanced system of electronics in the industry, enabling communication between batteries and tools, allowing for unmatched levels of performance, protection, and compatibility. REDLITHIUM™ HIGH OUTPUT™ Battery Pack (Not Included): Provides 50% more power and runs 50% cooler versus standard REDLITHIUM™ Battery. Superior pack construction, electronics and performance deliver more work per charge and more work over pack lifespan than any battery on the market. Includes a RAPIDSTOP™ Brake, to quickly stop accessories and Enhance Safety Paddle Switch Design for Increased Comfort and Ease-Of-Use when Operating in Various Positions Tool-Free Guard Adjustment for faster guard installations and adjustments Tool-Free Accessory Changes with Integrated FIXTEC Nut Technology Electronic Clutch for Kickback Protection 5/8"-11 Spindle for Use with Common Grinding Accessories Overload Protection to Maximize Motor Life Anti-Vibration Side Handle for Increased User Comfort and Safety ONE-KEY™ Tracking and Tool Management Compatible with all M18™ Batteries (NOT INCLUDED) Document Owner's Manual

Description The MILWAUKEE® M18 FUEL™ 41/2" / 5" Grinder Slide Switch, Lock On Kit is the next advancement in power and performance, generating 11A corded power, fastest cutting, and delivering up to 135 cuts per charge. The M18 FUEL™ 41/2" / 5" Grinder generates 11A corded power allowing completion of the toughest grinding and cutting applications, all on the M18™ cordless system. The POWERSTATE™ Brushless Motor delivers maximum sustained power and 8,500 RPM to remove material faster and increase productivity. REDLINK PLUS™ Intelligence ensures unmatched levels of performance, protection, and compatibility. The M18 FUEL™ 41/2" / 5" Grinder includes an electronic clutch for kickback protection, as well as overload protection to maximize motor life. The M18™ REDLITHIUM™ HIGH OUTPUT™ XC6.0 Batteries (NOT INCLUDED) deliver 50% more power while running 50% cooler than our M18™ REDLITHIUM™ XC Batteries and are compatible with 200+ Tools in the M18™ System. Experience faster accessory changes and less downtime with tool free accessory and guard adjustments while remaining fully compatible with the most common accessories in the market. The M18 FUEL™ 41/2" / 5" Grinder takes cordless grinders to the next level in performance and runtime. ***BATTERY AND CHARGER ARE NOT INCLUDED Features POWERSTATE™ Brushless Motor: Purposely built for the M18 FUEL™ 4-1/2" / 5" Angle Grinder delivers 8,500 RPM to provide the power to complete the toughest grinding and cutting applications. REDLINK PLUS™ Intelligence: Most advanced system of electronics in the industry, enabling communication between batteries and tools, allowing for unmatched levels of performance, protection, and compatibility. REDLITHIUM™ HIGH OUTPUT™ Battery Pack (NOT INCLUDED) : Provides 50% more power and runs 50% cooler versus standard REDLITHIUM™ Battery. Superior pack construction, electronics and performance deliver more work per charge and more work over pack lifespan than any battery on the market. Slide Switch Designed to Reduce User Fatigue Tool-Free Guard Adjustment for faster guard installations and adjustments Tool-Free Accessory Changes with Integrated FIXTEC Nut Technology Electronic Clutch for Kickback Protection 5/8"-11 Spindle for Use with Common Grinding Accessories Overload Protection to Maximize Motor Life Anti-Vibration Side Handle for Increased User Comfort and Safety Compatible with all M18™ Batteries (NOT INCLUDED) Kit Includes (1) M18 FUEL™ 4-1/2" / 5" Grinder Slide Switch, Lock-On (2881-20) (1) T27 Guard (1) T1 Clip-On Guard (1) Side Handle (1) Wrench (1) Back Flange (1) Flange Nut Document Owner's Manual

Description The MILWAUKEE® M18 FUEL™ 41/2" / 5" Grinder Paddle Switch, NoLock Kit is the next advancement in power and performance, generating 11A corded power, fastest cutting, and delivering up to 135 cuts per charge. The M18 FUEL™ 41/2" / 5" Grinder generates 11A corded power allowing completion of the toughest grinding and cutting applications, all on the M18™ cordless system. The POWERSTATE™ Brushless Motor delivers maximum sustained power and 8,500 RPM to remove material faster and increase productivity. REDLINK PLUS™ Intelligence ensures unmatched levels of performance, protection, and compatibility. The M18 FUEL™ 41/2" / 5" Grinder includes an electronic clutch for kickback protection, as well as overload protection to maximize motor life. The M18™ REDLITHIUM™ HIGH OUTPUT™ XC6.0 Batteries deliver 50% more power while running 50% cooler than our M18™ REDLITHIUM™ XC Batteries and are compatible with 200+ Tools in the M18™ System. Experience faster accessory changes and less downtime, with tool free accessory and guard adjustments while remaining fully compatible with the most common accessories in the market. The M18 FUEL™ 41/2" / 5" Grinder takes cordless grinders to the next level in performance and runtime. Features POWERSTATE™ Brushless Motor: Purposely built for the M18 FUEL™ 4-1/2" / 5" Angle Grinder delivers 8,500 RPM to provide the power to complete the toughest grinding and cutting applications. REDLINK PLUS™ Intelligence: Most advanced system of electronics in the industry, enabling communication between batteries and tools, allowing for unmatched levels of performance, protection, and compatibility. REDLITHIUM™ HIGH OUTPUT™ Battery Pack (Not Included): Provides 50% more power and runs 50% cooler versus standard REDLITHIUM™ Battery. Superior pack construction, electronics and performance deliver more work per charge and more work over pack lifespan than any battery on the market. Paddle Switch Design for Increased Comfort and Ease-Of-Use when Operating in Various Positions Tool-Free Guard Adjustment for faster guard installations and adjustments Tool-Free Accessory Changes with Integrated FIXTEC Nut Technology Electronic Clutch for Kickback Protection 5/8"-11 Spindle for Use with Common Grinding Accessories Overload Protection to Maximize Motor Life Anti-Vibration Side Handle for Increased User Comfort and Safety Compatible with all M18™ Batteries Kit Includes (1) M18 FUEL™ 4-1/2" / 5" Grinder Paddle Switch, No-Lock (2880-20) (2) M18 REDLITHIUM™ HIGH OUTPUT™ XC6.0 Battery Pack (48-11-1865) (1) M18™ & M12™ Rapid Charger (48-59-1808) (1) T27 Guard (1) T1 Clip-On Guard (1) Side Handle (1) Wrench (1) Back Flange (1) Flange Nut (1) Contractor Bag Document Owner's Manual

Description The MILWAUKEE® M18 FUEL™ 41/2" / 5" Grinder Paddle Switch, NoLock Kit is the next advancement in power and performance, generating 11A corded power, fastest cutting, and delivering up to 135 cuts per charge. The M18 FUEL™ 41/2" / 5" Grinder generates 11A corded power allowing completion of the toughest grinding and cutting applications, all on the M18™ cordless system. The POWERSTATE™ Brushless Motor delivers maximum sustained power and 8,500 RPM to remove material faster and increase productivity. REDLINK PLUS™ Intelligence ensures unmatched levels of performance, protection, and compatibility. The M18 FUEL™ 41/2" / 5" Grinder includes an electronic clutch for kickback protection, as well as overload protection to maximize motor life. Experience faster accessory changes and less downtime, with tool free accessory and guard adjustments while remaining fully compatible with the most common accessories in the market. The M18 FUEL™ 41/2" / 5" Grinder takes cordless grinders to the next level in performance and runtime. ***BATTERY AND CHARGER ARE NOT INCLUDED Features POWERSTATE™ Brushless Motor: Purposely built for the M18 FUEL™ 4-1/2" / 5" Angle Grinder delivers 8,500 RPM to provide the power to complete the toughest grinding and cutting applications. REDLINK PLUS™ Intelligence: Most advanced system of electronics in the industry, enabling communication between batteries and tools, allowing for unmatched levels of performance, protection, and compatibility. REDLITHIUM™ HIGH OUTPUT™ Battery Pack (Not Included): Provides 50% more power and runs 50% cooler versus standard REDLITHIUM™ Battery. Superior pack construction, electronics and performance deliver more work per charge and more work over pack lifespan than any battery on the market. Paddle Switch Design for Increased Comfort and Ease-Of-Use when Operating in Various Positions Tool-Free Guard Adjustment for faster guard installations and adjustments Tool-Free Accessory Changes with Integrated FIXTEC Nut Technology Electronic Clutch for Kickback Protection 5/8"-11 Spindle for Use with Common Grinding Accessories Overload Protection to Maximize Motor Life Anti-Vibration Side Handle for Increased User Comfort and Safety Compatible with all M18™ Batteries (NOT INCLUDED) Document Owner's Manual

Description The M18™ Force Logic™ 15T crimper is the easiest way to crimp. Designed to reduce peak muscle effort, the unique inline design and center balanced grip enables use with one hand. Being the lightest 15T crimper along with a 350° rotating head provides the easiest alignment. This crimper is fully compatible with all industry standard pdies and ptou die adapters, enabling users to utilize existing dies. The quick release and push to close pin design provides easy access around splices and in crowded environments. Predictive force monitoring (PFM™) constantly measures force output to deliver the fastest crimp speed while delivering accurate pressure with instant verification every time. Delivering up to 90 crimps per charge on an XC5.0 battery provides the user complete confidence to complete any job. The crimper creates UL classified crimps under UL 486ab from #8 – 750 MCM Cu and dual rated lugs and splices across several leading manufacturers when used with the corresponding Milwaukee® dies. With Milwaukee® ONEKEY™ Technology, Milwaukee® crimpers enable you to store real time crimp data, generate professional reports, view historical tool performance data and sync it all wirelessly to the cloud for easy access. Featuring a POWERSTATE™ brushless motor, REDLINK™ electronics and REDLITHIUM™ batteries results in unmatched reliability in the toughest conditions. Features Lightest 15T Crimper Center Balanced Grip Enables Use with One Hand Fastest Crimp Times in All Elements PFM™ (Predictive Force Monitoring) with Auto Complete Ensures Full Pressure Compatible with All Industry Standard P-Dies and U-Dies with P-to-U Die Adapter In-Line Design & 350° Rotating Head for Easy Access in Tight Spaces Quick Release and Push-to-Close Pin Design Provides Easy Access Around Splices Up to 90 Crimps per Charge on a M18™ REDLITHIUM™ XC5.0 Battery on 1000 MCM Al Pre-Crimp Battery Check Automatically Ensures Enough Charge to Complete Each Crimp Instant Verification of Successful Cycle with Green LED Records & Stores Every Crimp Made for Professional Report Building through ONE-KEY™ Creates UL Classified crimps under UL 486A-B from #8 - 1000 MCM Cu & #8 - 1000 MCM Dual Rated Lugs and Splices Across Several Leading Manufacturers when used with corresponding Milwaukee® dies Longer Life with POWERSTATE™ Brushless Motor & Weather Protected Electronics that Keep Dirt, Dust & Moisture Out Kit Includes (1) M18™ FORCE LOGIC™ 15T Crimper (Tool Only) (2879-20) (1) M18™ REDLITHIUM™ CP2.0 Battery (48-11-1820) (1) M18™ REDLITHIUM™ XC5.0 Extended Capacity Battery Pack (48-11-1850) (1) M18™ & M12™ Multi-Voltage Charger (48-59-1812) (1) 15T P to U-Die Adapter (49-15-PUAD) (1) Inverter (1) Carabineer (1) Contractor Bag Technical Information Height 5.5" Length 23.25" Weight 16.11 lbs Width 3.125" Power Source Cordless Force 15 Tons Capacity Cu #8AWG - 1500 MCM Cu Capacity Al #8AWG - 1250 MCM Al Battery System M18 Document Owner's Manual

Description The M18™ Force Logic™ 750 MCM dieless crimper is the simplest way to crimp. This crimper utilizes an industry first technology called auto distance control to produce cULus classified connections under UL 486AB for #6 750 MCM Cu and dual rated connectors for seven major manufacturers (Anderson, Blackburn® Burndy, Ilsco, Panduit, Penn Union and Thomas & Betts). Auto distance control enables the tool to sense the instant it contacts the connector delivering optimal compression with a single crimp across the entire capacity range. Controlling compression by distance also provides uniform crimp appearance across all sizes for easy installation in tight panels. The lightest crimper in its capacity range, an inline design and a 180° rotating head delivers the easiest alignment. The fully enclosed high speed hydraulic pump provides the fastest dieless connections while delivering up to 90 crimps per charge on an CP2.0 battery. With Milwaukee® ONEKEY™ Technology, Milwaukee® crimpers enable you to store real time crimp data, generate professional reports, view historical tool performance data and sync it all wirelessly to the cloud for easy access. Featuring a POWERSTATE™ brushless motor, REDLINK™ electronics and REDLITHIUM™ batteries results in unmatched reliability in the toughest conditions. Features Find the most updated UL Classification Matrix in the Operators Manual Auto Distance Control Continuously Measures Distance & Pressure for Uniform Crimp Appearance Across All Sizes Auto Distance Control Delivers Optimal Compression, allowing for Single Crimp Connections Across the Entire Capacity Range Fastest Dieless Crimper Lightest, In-Line Design & 180° Rotating Head for Easiest Alignment Low Profile Clevis and Narrow Nest for Easiest Alignment Easy Access Latch & One Handed Close, Frees-Up Second Hand to Hold Material Up to 90 Crimps per Charge on a M18™ RedLithium™ CP2.0 Battery on 600MCM Cu Pre-Crimp Battery Check Automatically Ensures Enough Charge to Complete Each Crimp Instant Verification of Successful Cycle with Green LED The Tool Records & Stores Every Crimp Made for Professional Report Building through ONE-KEY™ Longer Life with POWERSTATE™ Brushless Motor & Weather Protected Electronics that Keep Dirt, Dust & Moisture Out Kit Includes (1) M18™ FORCE LOGIC™ 750 MCM Dieless Crimper (2877-22) (2) M18™ REDLITHIUM™ CP2.0 Battery (48-11-1820) (1) M18™ & M12™ Multi-Voltage Charger (48-59-1812) (1) Carrying Case Technical Information Height 6.5" Length 18.9" Weight 9 lbs Width 3.3" Power Source Cordless Battery System M18 Document Owner's Manual

Description The Milwaukee® M18 FUEL™ pipe threader w/ ONEKEY™ is the industry’s first cordless pipe threader, revolutionizing pipe threading. The cordless pipe threader has AUTOSTOP™ technology that senses severe kickback and automatically shuts the tool off. It also has a die head retention lock preventing die head ejection and an inline side grip to eliminate the need to hold the spinning die head when starting threads. The portable pipe threader delivers unmatched tool control and functionality allowing faster threading than corded competitors. Featuring a multispeed selector, this powerful pipe threader threads faster than the corded competition, maximizing productivity without compromising thread quality. The metal pipe threader delivers the power to thread up to 2 in. black iron pipe, stainless steel, and rigid metal conduit (RMC). The handheld pipe threader is compatible with ONEKEY™ Technology and is the industry's first pipe threader that wirelessly connects to a smart phone to track the tool's location, manage it in inventory, and lock the tool out for added security and investment protection. Features AUTOSTOP™ kickback control prevents severe kickback Side Grip Thread Starts Threads Faster than Corded Side grip and die head retention lock for no engagement with spinning die head Offset die head for closer threading near pipe bends and against walls. Compatible with ridgid® 12-R and Reed R12+ die heads Dedicated Support Arm enables threading without pipe stand Over 25, 2” pipe threads per charge Multi-Speed Selector optimizes thread quality across pipe sizes One-Key™ technology allows for tracking, tool security, and inventory management POWERSTATE™ Brushless Motor provides more power, more run-time, and longer life REDLINK PLUS™ Electronic Intelligence enables advanced communication between batteries and tools for unmatched performance, protection, and productivity. Magnesium enforced carry handle Fits M18™ Batteries Kit Includes (1) M18 FUEL™ Pipe Threader w/ One-Key™ (2874-20) (2) M18 REDLITHIUM™ HIGH OUTPUT™ HD12.0 Battery Pack (48-11-1812) (1) M18™ & M12™ Rapid Charger (48-59-1808) (1) Threading Support Arm (1) Carrying Case Technical Information Height 8.5" Length 26.3" Voltage 18V Weight 22.3 lbs Width 4.8" Power Source Cordless Battery System M18 Document Owner's Manual

Description The MILWAUKEE® M18 FUEL™ ANGLER™ 240' Steel Pulling Fish Tape Kit is part of the world's first battery powered fish tape solution. The fish tape wire puller’s AUTORUN™ Powered Feed and Retract eliminates manual pulling tools for less user fatigue and automatically reels the tape back into the Replacement Cartridge for a cleaner jobsite. The electric fish tape wire puller features a POWERSTATE™ Brushless Motor that provides the ability to pull wire through a 200' run with 360° degrees of bends. This new battery powered fish tape puller is more efficient with an automatic feed that pushes through bends faster for maximum jobsite efficiency. The M18 FUEL™ ANGLER™ Pulling Fish Tape Powered Base is powered by the M18™ REDLITHIUM™ battery pack and is compatible with 3 Less Binding steel and nonconductive Replacement Cartridges to tackle any situation. The automatic wire puller is equipped with REDLINK PLUS™ Intelligence to ensure maximum performance and protection from overload. ***THIS KIT INCLUDES A 240' STEEL FISH TAPE*** Features This Milwaukee Powered fishing tool can pull up to 200' through 360° Bends Faster (240' fish tape included in this kit) AUTO-RUN™ Powered Feed & Retract for Reduced Muscle Effort Less Binding Replacement Cartridge Design Delivers Easiest Payout and Wind-up Tape automatically retracts into cartridge for a cleaner jobsite Automatic feed pushes through bends faster Compatible with 3 interchangeable cartridges up to 240' steel and 100' non-conductive Variable speed trigger for maximum control Durable powered base and replaceable cartridges deliver the longest lasting solution Quick-change latches for easy cartridge swap out Compatible with All M18™ Batteries Kit includes (1) M18 FUEL™ ANGLER™ Pulling Fish Tape Powered Base (2873-20) (1) M18 FUEL™ ANGLER™ 240' Steel Pulling Fish Tape Kit (2873B-22) (2) M18™ REDLITHIUM™ CP2.0 Battery (48-11-1820) (1) M18™ & M12™ Multi-Voltage Charger (48-59-1812) Technical Information Height: 17.7" Length: 13.2" Weight: 6.4 lbs Width: 6" Power Source: Cordless Battery System: M18 Document Owner's Manual

Description The MILWAUKEE® M18 FUEL™ ANGLER™ 120' Steel Pulling Fish Tape Kit is part of the world's first battery powered fish tape solution. The fish tape wire puller’s AUTORUN™ Powered Feed and Retract eliminates manual pulling tools for less user fatigue and automatically reels the tape back into the Replacement Cartridge for a cleaner jobsite. The electric wire puller features a POWERSTATE™ Brushless Motor that provides the ability to pull wire through a 200' run with 360° degrees of bends. This new battery powered fish tape puller is more efficient with an automatic feed that pushes through bends faster for maximum jobsite efficiency. The M18 FUEL™ ANGLER™ Pulling Fish Tape Powered Base is powered by the M18™ REDLITHIUM™ battery pack and is compatible with 3 Less Binding steel and nonconductive Replacement Cartridges to tackle any situation. The automatic wire puller is equipped with REDLINK PLUS™ Intelligence to ensure maximum performance and protection from overload. ***THIS KIT INCLUDES 120' STEEL FISH TAPE*** Features This Milwaukee Powered fishing tool can pull up to 200' through 360° Bends Faster (This kit includes a 120' steel fish tape, longer tape sold separately) AUTO-RUN™ Powered Feed & Retract for Reduced Muscle Effort Less Binding Replacement Cartridge Design Delivers Easiest Payout and Wind-up Tape automatically retracts into cartridge for a cleaner jobsite Automatic feed pushes through bends faster Compatible with 3 interchangeable cartridges up to 240' steel and 100' non-conductive Variable speed trigger for maximum control Durable powered base and replaceable cartridges deliver the longest lasting solution Quick-change latches for easy cartridge swap out Compatible with All M18™ Batteries Kit includes (1) M18 FUEL™ ANGLER™ Pulling Fish Tape Powered Base (2873-20) (1) M18 FUEL™ ANGLER™ 120' X 1/8" Steel Pulling Fish Tape Replacement Cartridge (48-44-5176) (2) M18™ REDLITHIUM™ CP2.0 Battery (48-11-1820) (1) M18™ & M12™ Multi-Voltage Charger (48-59-1812) Technical Information Height: 17.7" Length: 13.2" Weight: 6.4 lbs Width: 6" Power Source: Cordless Battery System: M18 Document Owner's Manual

Description The MILWAUKEE® M18 FUEL™ ANGLER™ Interchangeable Pulling Fish Tape System is the world's first battery powered fish tape solution. The fish tape wire (NOT INCLUDED) puller’s AUTORUN™ Powered Feed and Retract eliminates manual pulling tools for less user fatigue and automatically reels the tape back into the Replacement Cartridge for a cleaner jobsite. The electric fish tape wire puller features a POWERSTATE™ Brushless Motor that provides the ability to pull wire through a 200' run with 360° degrees of bends. This new battery powered fish tape puller is more efficient with an automatic feed that pushes through bends faster for maximum jobsite efficiency. The M18 FUEL™ ANGLER™ Pulling Fish Tape Powered Base is powered by the M18™ REDLITHIUM™ battery pack (not included) and is compatible with 3 Less Binding steel and nonconductive Replacement Cartridges to tackle any situation. The automatic wire puller is equipped with REDLINK PLUS™ Intelligence to ensure maximum performance and protection from overload. ***FISH TAPE IS NOT INCLUDED. THIS IS THE CASING ONLY ***BATTERY AND CHARGER ARE NOT INCLUDED Features Power to Pull 200' through 360° Bends Faster AUTO-RUN™ Powered Feed & Retract for Reduced Muscle Effort Less Binding Replacement Cartridge Design Delivers Easiest Payout and Wind-up Tape automatically retracts into cartridge for a cleaner jobsite Automatic feed pushes through bends faster Compatible with 3 interchangeable cartridges up to 240' steel and 100' non-conductive Variable speed trigger for maximum control Durable powered base and replaceable cartridges deliver the longest lasting solution Quick-change latches for easy cartridge swap out Compatible with All M18™ Batteries Technical Information Height: 17.7" Length: 13.2" Weight: 6.4 lbs Width: 6" Power Source: Cordless Battery System: M18 Document Owner's Manual

Description The Milwaukee® M18™ brushless threaded rod cutter kit is a dedicated solution for cutting the most common threaded rod sizes on the job site, including coarse 1/4 in., 3/8 in. and 1/2 in. mild steel to 1/4 in. and 3/8 in. stainless steel. The cordless threaded rod cutter is powered by a brushless motor and delivers 400+ cuts while powered by an M18™ REDLITHIUM™ 2.0 Ah battery. The four sided cutting dies allow users to cut multiple sizes of threaded rod on one tool by simply rotating the dies. The all thread cutter has the clearest line of sight and delivers clean, burr free cuts allowing nuts to be threaded on by hand without having to file down the ends. The rod cutter features optimized blade geometry and cut speed to prevent chips and sparks while cutting. It has auto jaw opening allowing fast, repetitive cuts while a reverse button helps prevent unintended cuts. Its centered grip provides the best balance for onehanded overhead trims, while the flat horizontal design provides users with a stable surface for bench top cuts. The Milwaukee threaded rod cutter kit includes one M18™ REDLITHIUM™ 2.0 Ah battery, a multi voltage charger, and a carrying case. Features Delivers Clean, Burr-Free Cuts for Threading Nuts on by Hand Powers through 1/2" Mild Steel & 3/8" Stainless Steel Threaded Rod in Seconds Centered Grip Optimized for One-Handed Overhead Operation Improved Cutting, No Chips or Sparks Cuts 1/4", 3/8" & 1/2" Mild Steel, 1/4" & 3/8" Stainless Steel, Coarse Threaded Rod Brushless Motor provides more power, more run-time, and longer life Flat Horizontal Position for Benchtop Use Clearest Line of Sight While Making Overhead Cuts 1-1/2" Trim Length Delivers Even, Uniform Cuts Every Time Auto Jaw Opening for Fast, Repetitive Cuts Four Sided Rotatable Cutting Dies Allow You to Cut Three Different Sizes of Threaded Rod with the Same Tool Reverse Button for Unintended Cuts LED Light Illuminates Cut Area Easy Die Changes Using Allen Key Stored On Tool Delivers 400+ Cuts on 3/8" Mild Steel Per Charge with a M18™ 2.0Ah Battery Kit Includes (1)M18 Brushless Threaded Rod Cutter (2872-20) (1) M18™ REDLITHIUM™ 2.0 Ah battery (1) Multi voltage charger (1) Carrying case. Technical Information Height 6.3" Length 10" Tool Warranty 5 Years Voltage 18V Weight 7.7 lbs Width 5" Power Source Cordless Warranty 5 Year Limited Warranty Battery System M18 Document Owner's Manual

Description The Milwaukee® M18™ brushless threaded rod cutter is a dedicated solution for cutting the most common threaded rod sizes on the job site, including coarse 1/4 in., 3/8 in. and 1/2 in. mild steel to 1/4 in. and 3/8 in. stainless steel. The cordless threaded rod cutter is powered by a brushless motor and delivers 400+ cuts while powered by an M18™ REDLITHIUM™ 2.0 Ah battery .(NOT INCLUDED) The four-sided cutting dies allow users to cut multiple sizes of threaded rod on one tool by simply rotating the dies. The all thread cutter has the clearest line of sight and delivers clean, burr-free cuts allowing nuts to be threaded on by hand without having to file down the ends. The rod cutter features optimized blade geometry and cut speed to prevent chips and sparks while cutting. It has auto jaw opening allowing fast, repetitive cuts while a reverse button helps prevent unintended cuts. Its centered grip provides the best balance for onehanded overhead trims, while the flat horizontal design provides users with a stable surface for bench top cuts. ***BATTERY AND CHARGER ARE NOT INCLUDED Features Delivers Clean, Burr-Free Cuts for Threading Nuts on by Hand Powers through 1/2" Mild Steel & 3/8" Stainless Steel Threaded Rod in Seconds Centered Grip Optimized for One-Handed Overhead Operation Improved Cutting, No Chips or Sparks Cuts 1/4", 3/8" & 1/2" Mild Steel, 1/4" & 3/8" Stainless Steel, Coarse Threaded Rod Brushless Motor provides more power, more run-time, and longer life Flat Horizontal Position for Benchtop Use Clearest Line of Sight While Making Overhead Cuts 1-1/2" Trim Length Delivers Even, Uniform Cuts Every Time Auto Jaw Opening for Fast, Repetitive Cuts Four Sided Rotatable Cutting Dies Allow You to Cut Three Different Sizes of Threaded Rod with the Same Tool Reverse Button for Unintended Cuts LED Light Illuminates Cut Area Easy Die Changes Using Allen Key Stored On Tool Delivers 400+ Cuts on 3/8" Mild Steel Per Charge with a M18™ 2.0Ah Battery Technical Information Height 6.3" Length 10" Tool Warranty 5 Years Voltage 18V Weight 7.7 lbs Width 5" Power Source Cordless Warranty 5 Year Limited Warranty Battery System M18 Document Owner's Manual

Description The MILWAUKEE® M18 FUEL™ 1" DHandle High Torque Impact Wrench w/ ONEKEY™ Kit is the world’s first cordless 1” DHandle High Torque Impact Wrench. The POWERSTATE™ Brushless Motor delivers up to 2,000 ftlbs of Nut Busting Torque and 1,900 ftlbs of fastening torque, making this the world's most powerful cordless impact wrench, able to complete the most demanding applications. With the runtime to install up to 200 11/4" bolts on a single HIGH OUTPUT™ HD12.0Ah battery, this tool provides unmatched performance. The battery powered impact wrench offers cordless convenience and eliminates the need for compressors, generators, cords, and hoses. Achieve greater productivity and portability without the need for compressors or hoses to complete applications not accessible with pneumatic units, reducing the cost of ownership by lowering energy costs and eliminating maintenance on compressors and generators. The REDLINK PLUS™ Intelligence ensures maximum performance and protects the High Torque Impact Wrench against overloads, overheating, and over discharge. M18™ REDLITHIUM™ Battery Packs are compatible with all M18™ tools, providing more work per charge and more work over the life of the pack. A patented battery isolation system manages high frequency vibrations, enabling battery movement that prevents damage and ensures a constant connection between the battery and tool when in use. The 4Mode DRIVE CONTROL™ provides greater control over the output speed and power of the High Torque Impact Wrench. The ONEKEY™ Technology allows for customization, tracking, and management of the impact wrench with the ability to set a repeatable torque output for maximum control. Features POWERSTATE™ Brushless Motor delivers up to 2,000 ft-lbs. Nut-Busting Torque, Making it the World's Most Powerful Cordless Impact Wrench Unmatched Performance with the runtime to install Up To 200 1-1/4" Bolts on a single HIGH OUTPUT™ HD12.0Ah battery Eliminates Compressors and Hoses, providing greater productivity, portability, and lower cost of ownership 4-Mode DRIVE CONTROL™ provides greater control over output speed and power. ONE-KEY™ Compatible: Ability to Customize, Track and Manage tools for increased productivity and investment protection. Includes the ability to set a repeatable torque output for maximum control A patented battery isolation system manages high frequency vibrations, enabling battery movement that prevents damage and ensures a constant connection between the battery and tool when in use. Tri-LEDs deliver high definition lighting to increase workspace visibility with less shadows 360° adjustable and removable side handle Integrated lanyard loop allows for safer use and easier storage REDLINK PLUS™ Intelligence ensures maximum performance and protects from overloads, heating and over-discharge Premium rubber over mold withstands corrosive materials and provides increased comfort when in use Compatible with all M18™ batteries Kit Includes (1) M18 FUEL™ 1" D-Handle High Torque Impact Wrench w/ ONE-KEY™ (2868-20) (2) M18 REDLITHIUM™ HIGH OUTPUT™ HD12.0 Battery Pack (48-11-1812) (1) M18™ & M12™ Rapid Charger (48-59-1808) (1) Tool-Free Adjustable Handle (1) Lanyard Loop (1) Contractor Bag Technical Information Height: 7.75" Length: 17.94" Tool Warranty: 2 Years Voltage: 18V Weight: 21 lbs Width: 5.12" Power Source: Cordless Fastening Torque: 0-1,900 ft-lbs Nut Busting Torque: 0-2,000 ft-lbs No Load RPM: 0-1200 No Load IPM: 0-1440 Drive Control: 4-Mode Customizable Compatible Chargers: Compatible with all M18™ chargers Compatible Batteries: Compatible with all M18™ battery packs One Key Compatible: Yes Battery System: M18

Description Our M18 FUEL™ 1 in. high torque impact wrench w/ ONEKEY™ is the world’s first cordless 1 in. high torque impact wrench. The POWERSTATE™ brushless motor delivers up to 1,800 ftlbs of nut-busting torque and 1,500 ftlbs of fastening torque, making this the most powerful cordless impact wrench and enabling you to complete the most demanding applications. At only 12.9 lbs with battery, the tool is up to 7 lbs. lighter than corded units, providing you with less fatigue while making overhead applications easier to complete on the job site. The battery-powered impact wrench provides you with cordless convenience and eliminates your need for compressors, generators, cords, and hoses. This reduces your cost of ownership by lowering energy costs and eliminating routine maintenance on compressors and generators. With no cord or hoses, you have greater portability and the ability to complete applications you were not able to do with a corded or pneumatic unit. The REDLINK Plus™ intelligence ensures you achieve maximum performance and protects your high torque impact wrench against overloads, overheating, and over-discharge. M18™ REDLITHIUM™ HIGH OUTPUT™ XC8.0 battery packs are compatible with all M18™ tools, providing you with more work per charge and more work over the life of the pack. The 4mode DRIVE CONTROL™ provides you with greater control over the output speed and power of the powerful high torque impact wrench. The ONEKEY™ capabilities provide you with the ability to customize, track and manage the impact wrench. ONEKEY™ Technology also gives you the ability to set a repeatable torque output for maximum control. Features POWERSTATE™ Brushless Motor delivers up to 1,800 ft-lbs. Nut-Busting Torque, Making it the World's Most Powerful Cordless Impact Wrench Up to 7 lbs. Lighter Weight allowing for less user fatigue Eliminates Compressors and Generators, providing greater portability and lower cost of ownership 4-Mode DRIVE CONTROL™ provides greater control over output speed and power Integrated lanyard loop allows for safer use and easier storage REDLINK PLUS™ Intelligence ensures maximum performance and protects from overloads, heating and over-discharge ONE-KEY™ Compatible: Ability to Customize, Track and Manage tools for increased productivity and investment protection. Includes the ability to set a repeatable torque output for maximum control Handle rotates 270 degrees and easily adjusts without a tool LED light to illuminate the work area Premium rubber overmold withstands corrosive materials and provides increased comfort when in use Compatible with all M18™ batteries Kit Includes (1) M18 FUEL™ 1" High Torque Impact Wrench w/ ONE-KEY™ (2867-20) (2) M18™ REDLITHIUM HIGH OUTPUT™ XC8.0 Battery (48-11-1880) (1) M18™ & M12™ Rapid Charger (48-59-1808) (1) Tool-Free Adjustable Handle (1) Lanyard Loop Technical Information Height 9.69" Length 10.9" Weight 10.5 lbs Width 3.44" Power Source Cordless ONE KEY Enabled Yes Fastening Torque 0-1,500 ft-lbs. fastening Nut Busting Torque 0-1,800 ft-lbs. breakway Drive Control 4-Mode Customizable No Load RPM 0-1,650 No Load IPM 0-2,400 Compatible Batteries Compatible with all M18 battery packs Compatible Chargers Compatible_Chargers Battery System M18

Description Our M18 FUEL™ 1 in. high torque impact wrench w/ ONEKEY™ is the world’s first cordless 1 in. high torque impact wrench. The POWERSTATE™ brushless motor delivers up to 1,800 ftlbs of nut-busting torque and 1,500 ftlbs of fastening torque, making this the most powerful cordless impact wrench and enabling you to complete the most demanding applications. At only 12.9 lbs with battery, the tool is up to 7 lbs. lighter than corded units, providing you with less fatigue while making overhead applications easier to complete on the job site. The battery-powered impact wrench provides you with cordless convenience and eliminates your need for compressors, generators, cords, and hoses. This reduces your cost of ownership by lowering energy costs and eliminating routine maintenance on compressors and generators. With no cord or hose, you have greater portability and the ability to complete applications you were not able to do with a corded or pneumatic unit. The REDLINK Plus™ intelligence ensures you achieve maximum performance and protects your high torque impact wrench against overloads, overheating, and over-discharge. M18™ REDLITHIUM™ battery packs (NOT INCLUDED) are compatible with all M18™ tools, providing you with more work per charge and more work over the life of the pack. The 4mode DRIVE CONTROL™ provides you with greater control over the output speed and power of the powerful high torque impact wrench . The ONEKEY™ capabilities provide you with the ability to customize, track and manage the impact wrench. ONEKEY™ Technology also gives you the ability to set a repeatable torque output for maximum control. ***BATTERY AND CHARGER ARE NOT INCLUDED Features POWERSTATE™ Brushless Motor delivers up to 1,800 ft-lbs. Nut-Busting Torque, Making it the World's Most Powerful Cordless Impact Wrench Up to 7 lbs. Lighter Weight allowing for less user fatigue Eliminates Compressors and Generators, providing greater portability and lower cost of ownership 4-Mode DRIVE CONTROL™ provides greater control over output speed and power Integrated lanyard loop allows for safer use and easier storage REDLINK PLUS™ Intelligence ensures maximum performance and protects from overloads, heating and over-discharge ONE-KEY™ Compatible: Ability to Customize, Track and Manage tools for increased productivity and investment protection. Includes the ability to set a repeatable torque output for maximum control Handle rotates 270 degrees and easily adjusts without a tool LED light to illuminate the work area Premium rubber over-mold withstands corrosive materials and provides increased comfort when in use Compatible with all M18™ batteries Kit Includes (1) M18 FUEL™ 1" High Torque Impact Wrench w/ ONE-KEY™ (2867-20) (1) Tool-Free Adjustable Handle (1) Lanyard Loop Technical Information Height 9.69" Length 10.9" Weight 10.5 lbs Width 3.44" Power Source Cordless ONE KEY Enabled Yes Fastening Torque 0-1,500 ft-lbs. fastening Nut Busting Torque 0-1,800 ft-lbs. breakway Drive Control 4-Mode Customizable No Load RPM 0-1,650 No Load IPM 0-2,400 Compatible Batteries Compatible with all M18 battery packs (NOT INCLUDED) Compatible Chargers Compatible_Chargers (NOT INCLUDED) Battery System M18

Description The M18™ FUEL™ 7/16 in. hex utility high torque impact wrench w/ ONEKEY™ delivers the fastest drilling speed, more power, and is built for maximum control. The POWERSTATE™ brushless motor and all-new mechanism provide linemen with 30% faster drilling speed, increasing productivity on the job. With up to 750 ftlbs max torque, this impact delivers more power for effortless removal of rusted or corroded hardware. It’s ergonomically designed for the lineman, providing superior control whether in-bucket, on-ground or climbing. The extended handle offers increased grip surface, perfectly fitting high voltage safety gloves for improved comfort, less fatigue, and balanced maneuverability. This is the first 7/16 in. impact in the industry to be equipped with a QUIKLOK™ chuck, uniquely providing faster and easier bit changes. Linemen can keep one hand firmly on the tool’s handle while inserting augers, sockets and other essential accessories. The integrated lanyard loop allows for transfer and storage. REDLINK Plus™ intelligence ensures maximum performance and protects from overloads, heating and over-discharge. The REDLITHIUM™ battery pack (not included on bare tool) is compatible with 175+ M18™ tools, delivers more work per charge and more work over the life of the pack than competitors. With ONEKEY™, you also gain the ability to customize, track and manage your utility impact. ONEKEY™ Technology also allows you to save up to 4 task settings directly to the tool. If your tool is ever lost or stolen, its tracking functionality can lock it out to protect your investment. Features POWERSTATE™ Brushless Motor and all-new mechanism delivers up to 30% Faster Drilling Speed, increasing users productivity Up to 750 ft-lbs Max Torque allows effortless removal of rusted or corroded fasteners Ergonomically designed for the lineman and Built for Maximum Control Extended handle offers increased grip surface with high voltage safety gloves for improved comfort, less fatigue, and balanced maneuverability QUIK-LOK™ 7/16" Hex Chuck delivers single handed bit insertion for faster, easier accessory bit installation Integrated lanyard loop ensures easy transfer and storage REDLINK PLUS™ Intelligence ensures maximum performance and protects from overloads, heating and over-discharge REDLITHIUM™ Battery Pack: Delivers more work per charge and more work over the life of the pack than competitors (2865-22 Kit Includes Battery) ONE-KEY™ Compatible: Ability to Customize, Track and Manage tools for increased productivity and investment protection LED light to illuminate the work area Premium rubber overmold withstands corrosive materials and provides increased comfort when in use Compatible with all M18™ batteries Kit Includes (1) M18 FUEL™ 7/16" Hex Utility High Torque Impact Wrench w/ ONE-KEY™ (Tool Only) (2865-20) (2) M18™ REDLITHIUM™ XC5.0 Extended Capacity Battery Pack (48-11-1850) (1) M18™ & M12™ Multi-Voltage Charger (48-59-1812) (1) Contractor Bag (1) Inverter Technical Information Height 10.5" Length 8.19" Voltage 18V Weight 5.85 lbs Width 3.13" Power Source Cordless Battery System M18 Document Owner's Manual

Description The 2864 M18™ FUEL™ w/ONEKEY™ high torque 3/4 in. impact wrench with friction ring provides the most powerful, most compact, and the most repeatable impact wrench in the industry! The POWERSTATE™ brushless motor delivers up to 1,200ftlbs of fastening torque and 1500ftlbs of nut busting torque, providing users a cordless solution that will eliminate the need for corded impact wrenches. The industry’s most compact cordless high torque impact wrench at 8.59 in. in length, this tool allows for more access in tight spaces. REDLINK Plus™ intelligence prevents damage to the tool and battery due to overloading or overheating. REDLITHIUM™ batteries (NOT INCLUDED) deliver more work per charge and more work over the life of the battery. Compatible with one key, this is the industry’s first high torque impact wrench that wirelessly connects to a smart phone to customize, track and manage a tool’s performance and location. Unlimited tool customization allows you to connect to the tool and access predetermined setups for specific fasteners and materials, or have complete control over output speed and power for the specific application at hand. With ONEKEY™, users now have a tool that delivers the most repeatable torque output in the industry. Users looking for a targeted torque range now have solution that will get users close to their targeted torque value, reducing the likelihood of significant under or over torque. Users will experience less rework, less damage, and increased productivity that will get users closer to their torque target and will finish with a calibrated torque device to reach their targeted torque value. The tool’s memory supports up to 4 custom profiles that can be easily accessed with the touch of a button on the tool. Once the profiles are saved to the tool, the connection to the smart phone is no longer necessary. Your custom profiles are also saved in the cloud so that they can be accessed at any time. ***BATTERY AND CHARGER ARE NOT INCLUDED Features Up to 1500 ft-lbs Nut-Busting Torque Most Compact Most Repeatable Torque POWERSTATE™ brushless motor delivers up to 1200ft-lbs of fastening torque and 1500ft-lbs of nut-busting torque Most compact cordless High Torque Impact Wrench in its class at 8.59" in length ONE-KEY™ Compatible: Customize, Track and Manage tool’s performance and location M18 FUEL with ONEKEY™ technology provides the most repeatable Impact Wrench in the industry Easily toggle up to four custom performance profiles that can be saved to the memory of the tool Features a friction ring with thru-hole design to ensure quick and easy socket changes Premium rubber over mold withstands corrosive materials and provides increased comfort when in use LED light to illuminate the work area Part of the M18 System, featuring over 150+ tools Technical Information Length: 8.59" Tool Warranty: 5 Years Voltage: 18V Weight: 6.3 lbs Power Source: Cordless ONE KEY Enabled: Yes Fastening Torque: 0-1,200 ft-lbs Nut Busting Torque: 0-1,500 ft-lbs Drive Control: 4-Mode Customizable No Load RPM: 0-1,800 No Load IPM: 0-2,400 Compatible Batteries: Compatible with all M18 battery packs Compatible Chargers: Compatible with all M18 chargers Battery System: M18 Document Owner's Manual

Description The MILWAUKEE® M18 FUEL™ 1/2" Compact Impact Wrench w/ Pin Detent is the most compact in its class, delivering more power, the most access in tight spaces at only 4.9" in length, and maximum workspace visibility. This cordless impact wrench features a POWERSTATE™ Brushless motor that generates up to 250 ftlbs of fastening and nut busting torque, providing the power required for installation and removal, even in confined spaces. This battery powered impact wrench has triLEDs that surround the anvil to deliver brighter light with fewer shadows. 4Mode DRIVE CONTROL™ offers greater precision with a range of preset RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUTOFF™ control applies no more than 20 ftlbs of torque for hand tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. REDLINK PLUS™ Intelligence electronics make these controls possible while ensuring maximum performance, protecting the tool against overloads, overheating, and over discharge. The M18™ REDLITHIUM™ battery pack (not included) fits M18™ cordless power tools, delivering more work per charge and more work over the life of the pack. ***BATTERY AND CHARGER ARE NOT INCLUDED Features Tool features pin detent for locking sockets in place securely, especially while working overhead 4.9" in length provides most access in tight spaces The POWERSTATE™ Brushless motor delivers up to 250 ft-lbs. of nut-busting torque Tri-LEDs deliver high definition lighting to increase workspace visibility with less shadows 4-Mode DRIVE CONTROL™ provides greater control over output speed and power. Includes auto shut-off and bolt-removal mode AUTO SHUT-OFF™ control prevents over tightening and increases productivity by applying no more than 20 ft-lbs. of torque Bolt Removal control delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops Mode 1 RPMs: 0-900; Mode 2 RPMs: 0-1,650; Mode 3 RPMs: 0-2,400; Mode 4 RPMs: 0-2,400 Mode 1 IPMs: 0-1,000; Mode 2 IPMs: 0-2,400; Mode 3 IPMs: 0-3,500; Mode 4 IPMs: 0-3,500 REDLINK PLUS™ Intelligence ensures maximum performance and protects from overloads, heating and over-discharge Works in up to to 69kV environments Compatible with all M18™ batteries & Chargers Technical Information Height: 7.95" Length: 4.9" Weight: 2.4 lbs Width: 2.56" Power Source: Cordless Nut Busting Torque: 250 (ft-lbs) Fastening Torque: 250 (ft-lbs) Anvil Type: 1/2" Square w/ Friction Ring Battery System: M18 Document Owner's Manual

Description The MILWAUKEE® M18 FUEL™ 3/8" Compact Impact Wrench w/ Friction Ring is the most compact in its class, delivering the most access in tight spaces, up to 250 ftlbs of nut busting torque, and maximum workspace visibility. The Milwaukee cordless impact wrench measures only 4.8" in length with a POWERSTATE™ Brushless motor to provide the power to remove stubborn fasteners, even in confined spaces. The Milwaukee 3/8" impact wrench has triLEDs that surround the anvil to deliver brighter light with fewer shadows. 4Mode DRIVE CONTROL™ offers greater precision with a range of preset RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUTOFF™ control applies no more than 20 ftlbs of torque for hand tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. REDLINK PLUS™ Intelligence electronics make these controls possible while ensuring maximum performance, protecting the tool against overloads, overheating, and over discharge. ***BATTERY AND CHARGER ARE NOT INCLUDED Features Friction ring (hog ring) ensures quick and easy socket changes 4.9" in length provides most access in tight spaces The POWERSTATE™ Brushless motor delivers up to 250 ft-lbs. of nut-busting torque Tri-LEDs deliver high definition lighting to increase workspace visibility with less shadows 4-Mode DRIVE CONTROL™ provides greater control over output speed and power. Includes auto shut-off and bolt-removal mode AUTO SHUT-OFF™ control prevents over tightening and increases productivity by applying no more than 20 ft-lbs. of torque Bolt Removal control delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops Mode 1 RPMs: 0-800; Mode 2 RPMs: 0-1,650; Mode 3 RPMs: 0-2,400; Mode 4 RPMs: 0-2,400 Mode 1 IPMs: 0-1,000; Mode 2 IPMs: 0-2,400; Mode 3 IPMs: 0-3,500; Mode 4 IPMs: 0-3,500 REDLINK PLUS™ Intelligence ensures maximum performance and protects from overloads, heating and over-discharge Works in up to to 69kV environments Compatible with all M18™ batteries & Chargers (NOT INCLUDED) Technical Information Height: 7.95" Length: 4.9" Weight: 2.4 lbs Width: 2.56" Power Source: Cordless Nut Busting Torque: 250 (ft-lbs) Fastening Torque: 250 (ft-lbs) Anvil Type: 1/2" Square w/ Friction Ring Battery System: M18 Document Owner's Manual

Description The MILWAUKEE® M18 FUEL™ 3/8" Compact Impact Wrench w/ Friction Ring Kit is the most compact in its class, delivering the most access in tight spaces, up to 250 ftlbs of nut busting torque, and maximum workspace visibility. The Milwaukee cordless impact wrench measures only 4.8" in length with a POWERSTATE™ Brushless motor to provide the power to remove stubborn fasteners, even in confined spaces. The Milwaukee 3/8" impact wrench has triLEDs that surround the anvil to deliver brighter light with fewer shadows. 4Mode DRIVE CONTROL™ offers greater precision with a range of preset RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUTOFF™ control applies no more than 20 ftlbs of torque for hand tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. REDLINK PLUS™ Intelligence electronics make these controls possible while ensuring maximum performance, protecting the tool against overloads, overheating, and over discharge. ***BATTERY AND CHARGER ARE NOT INCLUDED Features Friction ring (hog ring) ensures quick and easy socket changes 4.8" in length provides most access in tight spaces The POWERSTATE™ Brushless motor delivers up to 250 ft-lbs. of nut-busting torque Tri-LEDs deliver high definition lighting to increase workspace visibility with less shadows 4-Mode DRIVE CONTROL™ provides greater control over output speed and power. Includes auto shut-off and bolt-removal mode AUTO SHUT-OFF™ control prevents over tightening and increases productivity by applying no more than 20 ft-lbs. of torque Bolt Removal control delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops Mode 1 RPMs: 0-800; Mode 2 RPMs: 0-1,650; Mode 3 RPMs: 0-2,400; Mode 4 RPMs: 0-2,400 Mode 1 IPMs: 0-1,000; Mode 2 IPMs: 0-2,400; Mode 3 IPMs: 0-3,500; Mode 4 IPMs: 0-3,500 REDLINK PLUS™ Intelligence ensures maximum performance and protects from overloads, heating and over-discharge Works in up to to 69kV environments Compatible with all M18™ batteries & Chargers (NOT INCLUDED) Technical Information Height: 7.95" Length: 4.8" Weight: 2.4 lbs Width: 2.56" Power Source: Cordless Nut Busting Torque: 250 (ft-lbs) Fastening Torque: 250 (ft-lbs) Anvil Type: 3/8" Square w/ Friction Ring Battery System: M18 Document Owner's Manual

Description The Milwaukee® M18 FUEL™ rear handle 71/4 in. circular saw kit is designed for the professional carpenter, remodeler, and general contractor. The circular saw generates the power of 15 amp corded saws, cut faster than 15 amp corded saws and delivers up to 570 cuts per charge with an M18™ REDLITHIUM™ HIGH OUTPUT™ HD12.0 battery. The POWERSTATE™ brushless motor provides this worm drive style saw with 5,800 RPM and higher speeds under load, delivering corded cutting performance. REDLINK Plus™ intelligence lets the tool achieve maximum performance and protects the circular saw from overload, overheating and over discharge. The M18 REDLITHIUM™ HIGH OUTPUT™ HD12.0 battery is compatible with all M18™ tools, runs 50% cooler, and delivers unmatched run times and 50% more power. The cordless circular saw has an electric blade break, LED work light, and all magnesium guards and shoe, increasing productivity and providing the durability to handle the toughest jobs. A multi-sized rafter hook allows the handheld circular saw to be stored on different materials. The saw's gears don’t require oiling and maintenance reducing downtime and getting jobs done faster. Features POWERSTATE™ Brushless Motor: Purposely built for the M18 FUEL™ Rear Handle 7-1/4" Circular Saw to generate the power and performance of a 15A corded circular saw. REDLINK PLUS™ Intelligence: Ensures optimal performance and provides overload protection to prevent damage to the tool and battery during heavy applications while still maintaining compatibility across the entire M18™ System. REDLITHIUM™ HiGH OUTPUT™ HD12.0 Battery Pack: Provides 50% more power and runs 50% cooler versus standard REDLITHIUM™ HD packs. Superior pack construction provides the industry's best protection against jobsite conditions. Generates 15 Amp Corded Power Cuts Faster Than 15A Corded Up to 570 Cuts per charge Electric Blade Brake LED Work Light No Gear Oiling Required Multi Size Rafter Hook Magnesium Shoe and Guards Kit Includes (1) M18 FUEL™ 7-1/4" Rear Handle Circular Saw (2830-20) (1) M18 REDLITHIUM™ HIGH OUTPUT™ HD12.0 Battery Pack (48-11-1812) (1) M18™ & M12™ Rapid Charger (48-59-1808) (1) Blade (1) Contractor Bag (1) Wrench Technical Information Height 7.875" Length 18.9" Weight 10 lbs Width 8" Power Source Cordless Battery System M18 Document Owner's Manual

Description The Milwaukee® M18 FUEL™ rear handle 71/4 in. circular saw is designed for the professional carpenter, remodeler, and general contractor. The circular saw generates the power of 15 amp corded saws, cut faster than 15 amp corded saws and delivers up to 570 cuts per charge with an M18™ REDLITHIUM™ HIGH OUTPUT™ HD12.0 battery (NOT INCLUDED) . The POWERSTATE™ brushless motor provides this worm drive style saw with 5,800 RPM and higher speeds under load, delivering corded cutting performance. REDLINK Plus™ intelligence lets the tool achieve maximum performance and protects the circular saw from overload, overheating and over discharge. The M18 REDLITHIUM™ HIGH OUTPUT™ HD12.0 battery (not included) is compatible with all M18™ tools, runs 50% cooler, and delivers unmatched run times and 50% more power. The cordless circular saw has an electric blade break, LED work light, and all magnesium guards and shoe, increasing productivity and providing the durability to handle the toughest jobs. A multi sized rafter hook allows the handheld circular saw to be stored on different materials. The saw's gears don’t require oiling and maintenance reducing downtime and getting jobs done faster. ***BATTERY AND CHARGER ARE NOT INCLUDED Features POWERSTATE™ Brushless Motor: Purposely built for the M18 FUEL™ Rear Handle 7-1/4" Circular Saw to generate the power and performance of a 15A corded circular saw. REDLINK PLUS™ Intelligence: Ensures optimal performance and provides overload protection to prevent damage to the tool and battery during heavy applications while still maintaining compatibility across the entire M18™ System. REDLITHIUM™ HiGH OUTPUT™ HD12.0 Battery Pack: Provides 50% more power and runs 50% cooler versus standard (BATTERY NOT INCLUDED) REDLITHIUM™ HD packs. Superior pack construction provides the industry's best protection against jobsite conditions. Generates 15 Amp Corded Power Cuts Faster Than 15A Corded Up to 570 Cuts per charge Electric Blade Brake LED Work Light No Gear Oiling Required Multi Size Rafter Hook Magnesium Shoe and Guards Kit Includes (1) M18 FUEL™ 7-1/4" Rear Handle Circular Saw (2830-20) (1) Blade (1) Wrench Technical Information Height 7.875" Length 18.9" Weight 10 lbs Width 8" Power Source Cordless Battery System M18 Document Owner's Manual

Description The MILWAUKEE® M18 FUEL™ Compact Band Saw Kit offers a lightweight, balanced design with the largest capacity of any compact band saw at 31/4” X 31/4”. The band saw is equipped with a POWERSTATE™ Brushless motor, Constant Power Technology and Jobsite Armor Technology™ for the fastest cuts and better protection from drops and debris. Milwaukee REDLINK PLUS™ Intelligence delivers the most advanced system of cordless power tool electronics, providing optimized performance and overload protection using total system communication between tool, battery and charger. The variable speed trigger, tool free locking adjustable shoe, and LED work light provides maximum control and productivity. An integrated rafter hook for hanging allows for easy storage in between cuts. The M18 FUEL™ Compact Band Saw also has pipe reamer attachment compatibility to easily attach the customized reamer attachment (49-90-2029, sold separately) to the back of the band saw to cut and ream with the same tool. Features POWERSTATE™ brushless motor delivers the fastest cutting speed of any compact band saw Largest Capacity in it's Class: Versatility to cut up to 3-1/4" X 3-1/4" material in a single pass Lightweight Design for Increased Balance: 20% Lighter than it's previous model Conduit Reamer Attachment Compatibility: Reamer attaches directly to back of the tool (attachment sold separately) CPT Constant Power Technology™: maintains cut speed in the toughest applications for optimal performance Jobsite Armor Technology™: proprietary composite material and crush zone barriers provide long lasting rugged protection Variable Speed Trigger: Provides maximum speed control LED light: illuminates work surface for increased accuracy and productivity REDLINK PLUS™ Intelligence: the most advanced system of cordless power tool electronics, provides optimized performance and overload protection using total system communication between tool, battery and charger All Metal Direct Drive: delivers maximum tool life with all metal direct drive gearing system, while requiring less servicing than a chain drive Tool-Free Locking Adjustable Shoe: button actuated tool-free design allows user to quickly adjust from an extended shoe to no shoe in seconds Fully compatible with the M18™ system, featuring over 200+ tools Kit includes (1) Extreme Thick Metal 8/10 TPI Band Saw Blade (2) M18™ REDLITHIUM HIGH OUTPUT™ CP3.0 Battery (48-11-1835) (1) M18™ & M12™ Rapid Charger (48-59-1808) Technical Information Height: 11.6" Length: 17.9" Weight: 7.67 lbs Width: 6.3" Power Source: Cordless blade length: 35-3/8” only Battery System: M18 Document Owner's Manual

Description The MILWAUKEE® M18 FUEL™ Compact Band Saw Kit offers a lightweight, balanced design with the largest capacity of any compact band saw at 31/4” X 31/4”. The band saw is equipped with a POWERSTATE™ Brushless motor, Constant Power Technology and Jobsite Armor Technology™ for the fastest cuts and better protection from drops and debris. Milwaukee REDLINK PLUS™ Intelligence delivers the most advanced system of cordless power tool electronics, providing optimized performance and overload protection using total system communication between tool, battery and charger. The variable speed trigger, tool free locking adjustable shoe, and LED work light provides maximum control and productivity. An integrated rafter hook for hanging allows for easy storage in between cuts. The M18 FUEL™ Compact Band Saw also has pipe reamer attachment compatibility to easily attach the customized reamer attachment (49-90-2029, sold separately) to the back of the band saw to cut and ream with the same tool. ***BATTERY AND CHARGER ARE NOT INCLUDED Features POWERSTATE™ brushless motor delivers the fastest cutting speed of any compact band saw Largest Capacity in it's Class: Versatility to cut up to 3-1/4" X 3-1/4" material in a single pass Lightweight Design for Increased Balance: 20% Lighter than it's previous model Conduit Reamer Attachment Compatibility: Reamer attaches directly to back of the tool (attachment sold separately) CPT Constant Power Technology™: maintains cut speed in the toughest applications for optimal performance Jobsite Armor Technology™: proprietary composite material and crush zone barriers provide long lasting rugged protection Variable Speed Trigger: Provides maximum speed control LED light: illuminates work surface for increased accuracy and productivity REDLINK PLUS™ Intelligence: the most advanced system of cordless power tool electronics, provides optimized performance and overload protection using total system communication between tool, battery and charger All Metal Direct Drive: delivers maximum tool life with all metal direct drive gearing system, while requiring less servicing than a chain drive Tool-Free Locking Adjustable Shoe: button actuated tool-free design allows user to quickly adjust from an extended shoe to no shoe in seconds Fully compatible with the M18™ system, featuring over 200+ tools Technical Information Height: 11.6" Length: 17.9" Weight: 7.67 lbs Width: 6.3" Power Source: Cordless blade length: 35-3/8” only Battery System: M18 Document Owner's Manual

Description The MILWAUKEE® M18 FUEL™ SAWZALL® Recip Saw 2 Battery Kit is the next generation of legendary performance and durability, designed for the toughest applications on the job site. The M18 FUEL™ SAWZALL® is the fastest cutting reciprocating saw in its class and leverages a POWERSTATE™ Brushless Motor to provide 3,000 SPM and a 11/4" stroke length for faster material removal. REDLINK™ PLUS electronics ensure maximum performance under stress as well as protection from overloading, overheating, and over discharging. The included M18™ REDLITHIUM™ XC5.0 Batteries Pack deliver up to 2.5X runtime and provide more work per charge and more work over the life of the pack than competitive batteries. The M18 FUEL™ SAWZALL® Recip Saw is designed to perform in the most demanding applications and is the most durable Milwaukee cordless reciprocating saw yet. A wear resistant blade change, anticorrosion blade clamp, and metal reinforced battery rails provide longer component life and stand up to the toughest jobsite conditions. The M18 FUEL™ SAWZALL® is lighter weight than the previous generation and features an adjustable shoe, integrated LED light, and a hanging hook for convenient storage on the job. This M18 FUEL™ SAWZALL® Recip Saw Kit includes, (1) M18 FUEL™ SAWZALL® Recip Saw, (2) M18™ REDLITHIUM™ XC 5.0 Battery, and (1) M18™/M12™ Charger and a Case. Features 1-1/4" Stroke length removes more material with each stroke POWERSTATE™ Brushless Motor: Increased cutting speed and power through the toughest applications Anti-Corrosion Blade Clamp delivers prolonged blade clamp durability with less downtime due to corrosion Wear resistant lever actuated QUIK-LOK™ blade clamp provides fast and easy blade changes Metal Reinforced Battery Connection provides improved durability and battery retention over life REDLINK™ Plus Intelligence: The most advanced system of cordless power tool electronics; provides optimized performance and overload protection using total system communication between tool, battery and charger Lever Action QUIK-LOK™ Blade Clamp provides fast and easy blade changes Adjustable shoe extends the life of the blade Built-In LED light illuminates the work surface while cutting Hang hook: allows for convenient storage on the job Compatible with all M18™ batteries and M18™ chargers Kit Includes (1) M18 FUEL™ SAWZALL® Recip Saw (Tool Only) (2821-20) (2) M18™ REDLITHIUM™ XC5.0 Extended Capacity Battery Pack (48-11-1850) (1) M18™ & M12™ Multi-Voltage Charger (48-59-1812) Technical Information Length: 17.1" Tool Warranty: 5 year limited warranty Weight: 6.8Lb Power Source: Cordless LED Light: Yes Stroke Length: 1-1/4" Keyless Adjustable Shoe: Yes Keyless Blade Clamp: Yes Blade Clamp QUIK-LOK®: Universal SPM: 0-3,000 Battery System: M18 Document Owner's Manual

Description The M18 FUEL™ Super Hawg™ delivers the power and runtime necessary to complete full cordless rough-ins. Optimized for plumbing, pipe fitting and HVAC professionals, this drill powers through 61/4 in. holes and can drill over (100) 29/16 in. holes per charge in 2x dimensional lumber with a self-feed bit. The POWERSTATE brushless motor generates the same power and speed in application as a corded right angle drill. REDLINK PLUS intelligence is the most advanced electronic system on the market, preventing damage to the tool and battery caused by overloading or overheating. The REDLITHIUM HIGH OUTPUT™ 6.0 batteries delivers the power and runtime necessary to complete cordless rough-ins. A mechanical clutch in low speed protects the tool from damage in the case that a bit binds up and the tool stalls. ***BATTERY AND CHARGER ARE NOT INCLUDED Features Generates Corded Power As Fast As Corded Up to 100 2-9/16" Holes Per Charge Mechanical Clutch in Low Speed QUIK-LOK™ Chuck POWERSTATE™ Brushless Motor provides constant power under heavy load to power through 6-1/4" in. holes REDLINK PLUS™ Intelligence ensures maximum performance and protects from overloads, heating and over-discharge M18 REDLITHIUM™ HIGH OUTPUT™ XC6.0 Battery Pack delivers over 100 2-9/16" holes per charge, and has 50% More Power and Runs 50% Cooler vs. REDLITHIUM™ XC (NOT INCLUDED) All Metal Side Handle for optimal control LED light to illuminate the work area Compatible with all M18™ batteries Part of the M18 FUEL™ System Featuring 175+ Power Tool Solutions Technical Information Height: 12.51" Length: 5.23" Weight: 14.4 lbs Width: 24.4" Power Source: Cordless Battery System: M18 Document Owner's Manual

Description The M18 FUEL™ mud mixer with 180° handle is the industry’s first dedicated cordless solution that delivers the performance and durability to fully replace corded mixers. With the POWERSTATE™ brushless motor it has the power to mix heavy compounds, such as concrete and mortar. Using our REDLINK™ Intelligence the variable speed dial, the variable speed trigger and the lock on button combine to give the user ultimate control for a consistent mix and cleaner working environment. With the M18 REDLITHIUM™ battery (NOT INCLUDED) the user can mix up to 15, five gallon buckets on one 5.0 Ah battery. The 180° adjustable handle is designed to allow every user to optimize the handle position for their comfort. This Milwaukee cordless solution increases productivity by eliminating the need for cords and allows the user to mix the material at the workspace where it is being applied. ***BATTERY AND CHARGER ARE NOT INCLUDED Features Power To Mix Heavy Compounds, such as concrete and mortar Ultimate Speed Control: 3 different ways of controlling speed for clean and consistent mixes (8-Speed Setting Dial, Variable Speed Trigger and a Lock On Button) Up To 15 Buckets Per Charge (5.0Ah battery and 5 gallon buckets) 180° Adjustable handle with 16 adjustable settings for user to optimized based on preference and comfort 1/2" Keyed Chuck Chuck Key with on-tool storage LED Light Technical Information Height: 9.3" Length: 16.6" Tool Warranty: 5 Years Voltage: 18V Weight: 6 lbs Width: 3.3" Power Source: Cordless LED Light: Yes Battery System: M18 Document Owner's Manual