Testers

Description The Scout® Pro 3 Tester with Test + Map™ Remote Kit is a versatile cable tester that locates and tests voice, data and video cables. Use the self-storing remote and Test + Map™ remotes #2 - #6 for fast, accurate identification. Identify POE, POE+, A wiring, B wiring and voltage. This tester also measures cable length. This kit verifies accurate cable installations each time. Backlit display assists in reading results in lower light. Features Tests voice (RJ11/12), data (RJ45) and video (F-connector) coax connections Backlit LCD screen displays cable length, wiremap, cable ID and test results Wiremap testing, testing for Miswires, Split Pairs, Short Faults, Open Faults, and Shield Measures cable length up to 2000 feet Trace cables, wire pairs and individual conductor wires with a multi-style tone generator (requires analog probe Cat. No. VDV500-123; sold separately) Detect, identify and test Power over Ethernet (PoE) Identify multiple cable runs with location-mapping remotes Hub blink mode to identify port location on a hub or a switch 1 dockable smart remote, 5 loose smart remotes plus 7 female-to-female and 2 female-to-male coax adapters Includes a 9V battery and convenient carrying case Technical Information Type: Twisted Pair, DATA, Voice, LAN, and Coaxial Application: Cable Testing Special Features: Measures Cable Length; Power over Ethernet; Backlit LCD; Hub Blink Cable Type: DATA:, Shielded or Unshielded, CAT3, CAT5E, CAT6, CAT6A, CAT7; COAXIAL: RG59, RG6/6Q Overall Length: 7'' (17.8 cm) Overall Height: 3.2'' (8 cm) Overall Width: 1.5'' (3.8 cm) Material: Plastic and Metal Test-n-Map ID Remotes: (1) Self-Storing, (5) Test + Map™ Remotes (#2 - #6) Batteries: 9V Alkaline Battery Life: 50 Hours Active Drop Protection: 2 m Supported Remotes: 18 Connection & Adapter Types: RJ11, RJ12, RJ45, Coax F Display: Backlit LCD Multiple Style Tone Generator: Yes (5); Requires Tracing Probe (Cat. No. VDV500-123); Sold Separately Faults Detected: Open, Short, Miswire Test & Measure Types: Ethernet, Data, Coaxial Standard: CE Document Brochure Instruction

Description Conduct accurate circuit testing with this Greenlee TK-30A Basic Electrical Kit. It comes with the meter, detector and polarity cube, plus a handy storage case. Benefits DM-25 meter provides accurate, reliable electrical testing GT-10 polarity cube uses light sequences to indicate whether the wiring is correct or incorrect GT-11 non-contact voltage detector Zippered case keeps everything organized and secure Technical Information Brand: Greenlee AC Voltage: 200, 600V DC Voltage: 20, 200, 600V Resistance: 200, 2,000Ω; 20, 200, 2,000kΩ GT-11 Detection Range: 50 to 1,000 VAC Length: 10" (25.4 cm) Width: 8" (20.3 cm) Height: 3" (7.6 cm)

Description The Greenlee GT-16 Non-Contact Voltage Detector is adjustable to safely detect power and low voltage. Safely detects AC voltage without touching the bare conductor. Adjustable for use on power wiring plus lighting, thermostats and other low voltage circuits. Use to detect voltage in outlets, lighting fixtures, wires and cables. Finds breaks in wires. Identifies hot and neutral conductors. Benefits Adjustable to safely detect power and low voltage Safely detects AC voltage without touching the bare conductor Use to detect voltage in outlets, lighting fixtures, wires and cables Identifies hot and neutral conductors Adjustable for use on power wiring plus lighting, thermostats and other low voltage circuits Technical Information Brand: Greenlee Battery: 1.5V AAA (included) Frequency: 50 - 500Hz Voltage Detection: AC V 5-1000 Frequency: 50-500HZ Measurement Category: CAT IV, 1000V Weight: 95.2 g Documents Instruction Manual

Description An all-in-one basic Voice-Data-Video tester for verifying proper wiring of low-voltage and data communications cables. The primary function of the VDV is the wiremap test. The wiremap test visually shows, pin by pin, whether a cable is terminated properly at both ends and if there is continuity from end to end. The VDV can test Data/Ethernet RJ-45 (8P8C), Voice/Phone RJ-11/12(6P6C/6P4C), and Video/coax cables. The LCD visually displays “PASS” or “ERROR” after each test to verify if the cable is terminated correctly. Benefits Voice/Data/Video LCD based wire mapper verifies cable continuity Identifies errors by pin: shorts, opens, miswires, reversals, and split pairs For twisted pair, coax, and phone type cables Designed for Cat 3/5/5e/6/6a cables; RG59/6/ 6 Quad RJ-45; RJ-11/12; and Female F port interfaces Tone generator with 4 selectable tones Includes main remote and 9V battery Technical Information Product Datasheet Operating Instructions Brand: Ideal Cable Composition: Coax Tester Function: Wiremap