Test Equipment

Description The IDEAL 61-647 is CAT IV 1000 V AC, IP67 UL Listed, Single Range Non-Contact Voltage Tester that automatically detects and indicates the presence of voltage within range of range of 50 - 1000V AC. The tester can sustain a drop from 6.6 ft (2 m) and provides non-contact detection of voltage through an antenna enclosed in plastic at the tip of the tester which senses the presence of the electromagnetic field present around live conductors. The tip is illuminated by a green LED when powered on and switches to a red flashing LED, and audible beep that increase in frequency as the voltage level increases. The tester is powered by two 1.5V AAA batteries and features an in tip LED flash light, an audible disable function, a lanyard tie-off point, an auto power off function and a low battery indication. Features UL Certified CAT IV 1000V AC, 50 to 1000 V AC Dust Tight and Water proof (1 m for 30 minutes) Industrial Design makes this tester easy to grip and capable of sustaining a drop from 6.5 ft (2 m). An LED Flashlight in the tip operates independently of the tester functions and can be used to illuminate the work area. Press the Flashlight Button to turn it On/Off. The tester is set to Flashlight Off. The Flashlight will Auto Power Off after 5 minutes. Audible Notification Disable - The tester can be operated with a visual only indication of voltage when working in noise sensitive/noise restricted area with the simple press of a speaker button. Auto Power Off - After 10 minutes of inactivity (no button pressed and no signals detected), the tester will emit one long beep (~0.5s) and then shut off. Note: if the flashlight is on, it will be also shut off. Low Battery Indication - If battery voltage is less than around 2.4V, the green led in the tip will flash 3 times and the buzzer will send out one long beep, then turn off the device. Technical Information CAT Rating (Safety): CAT IV1000V Listing: cULus CE RCM Voltage Sensing Range: 50 - 1000V AC Dual Range: No Flashlight: Yes Drop Protection: 6.6 ft. (2m) Ingress Protection: IP67 Dual Range Sensitivity: No Audible Indication: Yes Audible Defeat: Yes Visual Indication: Green On - Flashing Red Visual Range Indicator: No Lanyard Compatible: Yes Auto-Power Off (APO): Yes Low Battery Indication: Yes Battery Type: 2x 1.5V AAA (included) Warranty: 2-Year Document Instruction Spec sheet Warranty

Description The Fluke 107 is a compact, palm size easy-to-use digital multimeter made to fit the way you work. It is the perfect first-pass troubleshooting tool; small enough to fit in a shirt pocket yet tough enough to withstand daily use, including a 1-meter drop test. For everyday applications where true-rms accuracy isn’t needed, the Fluke 107 delivers reliable measurements time after time. With a CAT III 600 V safety rating, you don’t need to compromise safety. The Fluke 107 offers a comfortable grip, weighs only 200 g, and is easy to carry. It comes with a TL75 Hard Point™ Test Lead Set. It’s one pair (red, black) of 48 inch (1.22 meter) test leads with right-angle, shrouded banana plugs. The meter also includes a SmartStrap™ intelligent magnetic multi-purpose lanyard that lets you hang the Fluke 107 from any ferrous surface or support the meter at an angle for easy viewing. Features Can measure multiple test functions like AC/DC voltage, AC/DC current, resistance, capacitance, diode, frequency and duty-cycle Enabled with current and voltage measurement functions, in a compact size Measures resistance & continuity to check for broken wires Data hold and backlit display to keep you working safe and fast Ergonomic and rugged Comfortable grip, only weighs 200g and easy to carry Rugged enclosure and 3.3' (1 m) drop test Full-parameter automatic range test, which is convenient and quick to test; at the same time, it reduces the number of rotations of the wave plate and prolongs the life of the instrument 6000-word large screen LCD backlight display Battery powered, automatic power save mode Data retention feature makes it easier to read measurement results Compliant with IEC61010-1 CATIII 600V overvoltage protection safety standard Technical Information Accuracy is available for one year after calibration, operating from 18 °C to 28 °C and relative humidity from 0% to 75%. The format of the accuracy specification is: ± ([% of reading] + [least significant digit]) Precision Specifications DC voltage 6.000 V 60.00 V 600.0 V 0.001 V 0.01 V 0.1 V 0.5 % + 3 Exchange millivolts 600.0 mV 0.1 mV 3.0 % + 3 Diode test 2 2.000 V 0.001 V 10 % Resistance (ohm) 400.0 Ω 4.000 kΩ 40.00 kΩ 400.0 kΩ 4.000 MΩ 40.00 MΩ 0.1 Ω 0.001 kΩ 0.01 kΩ 0.1 kΩ 0.001 MΩ 0.01 MΩ 0.5 % + 3 0.5 % + 2 0.5 % + 2 0.5 % + 2 0.5 % + 2 1.5% + 3 Capacitor 3 50.00 nF 500.0 nF 5.000 μF 50.00 μF 500.0 μF 1000 μF 0.01 nF 0.1 nF 0.001 μF 0.01 μF 0.1 μF 1 μF 2 % + 5 2 % + 5 5 % + 5 5 % + 5 5 % + 5 5 % + 5 Frequency 4 Hz (10 Hz – 100 kHz) 50.00 Hz 500.0 Hz 5.000 kHz 50.00 kHz 100.0 kHz 0.01 Hz 0.1 Hz 0.001 kHz 0.01 kHz 0.1 kHz 0.1 % + 3 Duty cycle 4 1 % to 99 % 0.10 % 1 % typical case 5 AC current (40 Hz - 200 Hz) 4.000 A 10.00 A 0.001 A 0.01 A 1.5 % + 3 DC 4.000 A 10.00 A 0.001 A 0.01 A 1.5 % + 3 All AC current, frequency, and duty cycle are specified from 1% to 100% of the range. Input values below 1% of range are not specified. Typically, the open circuit test voltage is 2.0 V and the short circuit current is 10 MΩ 60 dB at 50 Hz or 60 Hz at DC current − Exchange millivolts 600 mV >1M, 80 dB at 50 Hz or 60 Hz − DC voltage 600 V 1 >10 MΩ 100 dB at 50 Hz or 60 Hz at DC current >60 dB at 50 Hz or 60 Hz Up to 6 x 105 V Hz For medium voltage (alternating current), the input impedance is approximately 1 MΩ. General technical indicators The highest voltage applied to any terminal and ground 600 V Display (LCD) 6000 counts, updated three times per second Type of battery Two AAA batteries (NEDA 24A, IEC LR03) Battery life At least 200 hours Temperature Operating temperature 0 °C to 40 °C Storage temperature -30 °C to 60 °C Relative humidity Working humidity No condensation below 10 °C ≤ 90 % at 10 °C to 30 °C; ≤ 75 % at 30 °C to 40 °C Working humidity, 40 MΩ range ≤ 80 % at 10 °C to 30 °C; ≤ 70 % at 30 °C to 40 °C Altitude Working elevation 2000 m Storage altitude 12,000 m Temperature coefficient 0.1 X (specified accuracy) / °C (28 °C) Current input fuse protection 11A, 1000V fast-melting type, must use Fluke designated parts Volume (height x width x length) 142 mm x 69 mm x 28 mm Weight 200 g Protection level IEC 60529: IP 40 Safety IEC 61010-1: 600 V CAT III, pollution degree 2 Electromagnetic environment IEC 61326-1: Portable Electromagnetic compatibility Applicable only in Korea. Class A equipment (industrial broadcasting and communication equipment) 1 1 This product meets the requirements of industrial (Class A) electromagnetic wave equipment, which should be noted by the seller or user. The device is suitable for use in a work environment, not a home environment Document User's Manual

Description Designed for efficiency this product features a CATIII 600V safety rating with ETL and CE approval. Measures voltage, current, resistance, temperature, frequency, duty cycle, and capacitance, as well as perform diode and audible continuity tests. Features manual and auto-ranging with a relative offset mode that allows you to view changes in measurements. Benefits Measures AC/DC voltage, AC/DC current, resistance, temperature, frequency, duty cycle and capacitance Diode and audible continuity tests Relative offset mode to see changes in measurements Data hold Manual and auto-ranging Replaceable fuses for easy field repair Large, easy-to-read displays Backlit, 4000 count LCD Designed to increase efficiency on the job CATIII 600V safety ratings ETL and CE approved Lifetime Warranty Technical Information Brand: Greenlee Display: Digital AC Volts: 600 DC Volts: 600 Resistance: 40M Ohms Continuity/Diode Tests: Yes/Yes Frequency: Yes Duty Cycle: 5%~95% Capacitance: 200uF Temperature (Type K): Yes Counts: 4000 Hold: Yes Reactive: Yes Backlight: Yes Automatic Power Off (APO): Yesel Documents Instruction Manual