Test Equipment

Description The new Klein Tools’ ET20 Borescope can be quickly connected to your smartphone via the built-in WiFi signal, turning the smartphone in your pocket into a smart tool. Install the compatible App on your phone to display, record, store and also share your images and videos via text or email. This Borescope enables you to capture high-quality photo and video directly to your device from up to 30 feet away. It features a waterproof 9 mm camera with durable, armored 6-Foot (1.8 m) flexible gooseneck cable, on-board LED lights, convenient pocket clip and rechargeable lithium-ion battery. Benefits WiFi Borescope transmits and displays video and images directly to your smartphone up to 30 Feet (9 m) away Waterproof 9 mm camera has 6 on-board, adjustable LED lights and outputs high-quality 640 x 480 images Tough, armored 6-Foot (1.8 m) long waterproof camera gooseneck maneuvers around obstacles while maintaining rigidity Battery status indicator tracks the charge level of the lithium-ion battery Increase and decrease camera LED output either on the Borescope or in the App The App not only acts as a display, but stores and shares images and videos via text or email Includes convenient pocket clip, USB charging cable, hook attachment, carrying case, and instructions The Klein Borescope App is available free at the App Store® for iPhone® users and Google Play® for Android® users Technical Info Application: Electrical, HVAC, Plumbing, Aircraft Special Features: Free App Available Overall Length: 7.3'' (18.5 cm) Overall Height: 2.3'' (5.8 cm) Overall Width: 1.5'' (3.8 cm) Camera Head Diameter: 0.35'' (0.9 cm) Material: Polycarbonate and ABS Batteries: Rechargeable Lithium-Ion Battery Life: 5.5 Hours Display: Via Smartphone App IP Rating: Camera/Cable: IP67; Body: IP42 Safety Rating: Drop Test 3 Meters Included: Rechargeable Borescope, USB Charging Cable, Hook Attachment, Instructions, and Carrying Case Weight: 20 oz (567 g) Document Brochure Manual

Description Klein Tools Non-Contact Voltage Tester detects standard voltage in cables, cords, circuit breakers, lighting fixtures, switches, non tamper-resistant outlets and wires. A bright green LED indicates the tester is powered on. It changes to red and an audible tone sounds when voltage is detected. Features Voltage Tester provides non-contact detection of voltage in cables, cords, circuit breakers, lighting fixtures, switches, non tamper-resistant outlets and wires Volt Pen with high intensity, bright green LED indicates the tester is powered on When voltage is detected, a high intensity, bright red LED illuminates and an audible tone will sound 50 to 1000V AC power operating range allows broad application Auto power-off feature conserves and extends battery life CAT IV 1000V safety rating Lightweight compact design with a convenient clip to fit securely in your pocket Product not recommended for testing tamper-resistant outlets; use Cat. Nos. NCVT-2P or NCVT-3P in low voltage mode Includes instructions and 2 x AAA 1.5 volt batteries 6.6-Foot (2 m) drop protection Technical Information Type: Voltage Tester Pen Application: Non-Contact Detection and Testing of AC Voltage; Not Recommended for Tamper-Resistant Outlets Special Features: Green LED Indicates Power On; Red LED Indicates Voltage Detected with Audible Beeps Material: Polymer Body and Electronic Components Drop Protection: 9.8' (3 m) Voltage: 50 - 1000V AC Frequency: 50 - 500 Hz Pollution Degree: 2 Standard: CAT IV 1000V Included: Instructions and 2 x AAA 1.5 Volt Batteries Batteries: 2 x AAA Overall Length: 5.5'' (14 cm) Overall Height: 1'' (2.5 cm) Overall Width: 0.72'' (1.8 cm) Weight: 0.8 oz (23 g) Document NCVT Selection Chart User's Manual

Description Klein Tools CL700 Electrical Tester is an automatically ranging true root mean squared (TRMS) digital clamp meter that measures AC current via the clamp, and measures AC/DC voltage, resistance, continuity, frequency, capacitance, and tests diodes via test-leads, and temperature via a thermocouple probe. It also features a Low Impedance (LoZ) mode for identifying and eliminating ghost or stray voltages. Klein Tools’ Test and Measurement product line was exclusively designed from the ground up by electricians for electricians. Years of field research, combined with extensive input from electricians across America, inspired the development of meters loaded with innovative, time-saving features. Benefits Clamp Meter with automatically ranging true mean squared (TRMS) technology for increased accuracy Electronic Tester's clamp measures AC current and its thermocouple probe measures temperature Test leads measure AC/DC voltage, resistance, continuity, frequency and capacitance and tests diodes Low Impedance (LoZ) mode for identifying and eliminating ghost or stray voltages CAT IV 600V, CAT III 1000V, Class 2, Double insulation safety rating Built to withstand a 6.6-Foot (2 m) drop Low battery indicator and easily accessible battery compartment Includes a carrying pouch, test leads, thermocouple with adapter and batteries Meets requirements for use in basic and controlled electromagnetic environments like residential, office and light-industrial locations Operating Temperature: 32-degrees F to 104-degrees F (0-degrees C to 40-degrees C) Operating altitude to 6562-Foot (2000 m) Technical Information Application: Measures AC Current Special Features: Features Low Battery Indicator Batteries: 2 x AAA Jaw Size: 1.38'' (3.5 cm) Drop Protection: 6.6' (2 m) Display: 6000 Count LCD Functions: Clamp measures AC current and thermocouple probe measures temperature. Test leads measure AC/DC voltage, resistance, continuity, frequency and capacitance and tests diodes Voltage: 1000V AC; 1000V DC Frequency: 1Hz - 500 KHz Current: 600A Capacitance: 6000µF Ohms (Resistance): 60MO Temperature Range: -14° - 1000°F (-26° - 538°C) Ingress Protection: IP40 Standard: CAT IV 600V; CE Certified Included: Carrying Case, Test Leads, Thermocouple with Adapter, and Batteries Overall Length: 9.09'' (23.1 cm) Overall Height: 1.55'' (3.9 cm) Overall Width: 3.81'' (9.7 cm) Weight: 11.8 oz (336 g) Document Clamp Meter Selection Guide Instructions Safety Data Sheet

Description The Klein Tools Test Leads are intended for use as replacement test leads for meters that have standard, banana-type input jacks. They feature removable alligator clips that attach to wires and other conductors. These test leads are part of a full line of Klein Tools meters and testers, designed by electricians for electricians. Benefits Standard banana-type inputs compatible with most multimeters and clamp meters Removable alligator clips attach to wires and other conductors Includes one pair of universal test leads and one set of alligator clips. Leads are 41-Inches (1,041 mm) long Safety Rating: Category III 1000V and Category IV 600V Leads compatible and fit lead storage compartment on most Klein test and measure products Technical Information Overall Length: 41.00'' (104.1 cm) Material: PVC Included: (1) Pair of Universal Test Leads, (1) Set of Alligator Clips For Use With: Cat. No. MM300, MM400, MM500, MM600, MM700, MM100, MM200, MM1000, MM1300, MM2000, MM2300, MM5000, MM6000, CL100, CL200, CL1000, CL1200, CL1300, CL2000, CL2200, CL2300, CL2500 Weight: 0.20 lb (90.0 g) Document Brochure Instructions

Description The Klein Tools TI250 is an easy-to-use, USB rechargeable Thermal Imager. The large LCD displays unseen hot and cold spots for instant troubleshooting. Excellent resolution with over 10,000 pixels and your choice of three color palettes. The meter provides high and low-temperature points, crosshairs to pinpoint specific temperatures and options for temperature alarms. The addition of a microSD® Card (optional) allows the meter to capture and store images for reporting. Benefits Thermal Imager has over 10,000 pixels to troubleshoot hot and cold spots Adjustable emissivity from 0.10 to 0.99 Store and share images with optional microSD® Card User selectable high and low-temperature alarms from -4 to 752-Degree Fahrenheit (-40 to 250-Degree Celsius) Select color palettes to best capture the event Rechargeable lithium-ion battery Includes thermal imager, micro-USB charging cable, carrying case, and instructions Technical Information Type: Thermal Imager Application: View Hot and Cold Spots For Instant Troubleshooting Special Features: High and Low-Temperature Points, Crosshairs to Pinpoint Specific Temperatures, Options for Temperature Alarms, 3 Color Pallets Display: 2.4'' (6.1 cm) TFT LCD Display Resolution: 10,800 Pixels Sensor Type: VOX Micro Bolometer Sensor Resolution: 10,800 Pixels Temperature Range: -4° to 752°F (-20° to 400°C) Accuracy: At More Than 212°F (100°C): +/- 2° or 2% (Whichever is Greater); At Less Than 212°F (100°C): +/- 3° or 3% (Whichever is Greater) Field of View: 50° Emissivity: 0.10 to 0.99 Adjustable Color Pallets: Ironbow, Rainbow, and Gray Photo Capture: Yes Memory: MicroSD® Card (not included) Batteries: Lithium-Ion Included: Includes Thermal Imager, Micro-USB Charging Cable, Carrying Case, and Instructions Overall Length: 3.1'' (8.0 cm) Overall Width: 1'' (2.5 cm) Overall Height: 3.1'' (8.0 cm) Material: ABS/PC, Electronic Components Standards: CE and BC Weight: 8.5 oz (241 g) Documents Brochure Firmware Instructions Instruction Manual

Description The Klein Tools Utility Borescope captures a clear view of hard-to-reach areas. It comes with a 10-Foot (3m) Nylon USB-C Detachable Snake, magnet, hook, and mirror attachments. It has an 5.5mm waterproof (IP67) camera with adjustable LEDs with 4 brightness levels. It features a 4.3-Inch Color LCD monitor with 854 x 480 resolution, 3 times zoom, and 180-Degree screen view rotation. You can view captured video/images on the display or transfer to your PC using the USB-C interface. Features Borescope features compact 5.5mm water-resistant camera (IP67 for camera head and cable) with 720p resolution 4.3-Inch color LCD screen for clear viewing 10-Foot nylon snake navigates through twists, turns, and bends Includes hook, magnet, and mirror attachments to tackle wide variety of applications Camera is surrounded by 6 bright LED lights adjustable to 4 output levels Self-storing kickstand can be easily extended to free both hands for navigation Transfer photos and videos via USB-C interface Technical Information Type: USB-C Application: Electrical, HVAC, Plumbing, Aircraft Special Features: 10' (3 m) Nylon Gooseneck, 6 LED Lights Overall Length: 6.55'' (16.6 cm) Overall Height: 1.51'' (3.8 cm) Overall Width: 3.19'' (8.1 cm) Camera Head Diameter: 0.22'' (5.5 mm) Auto-Power Off: No Data Logging: No Material: PC/ABS Batteries: Lithium-ion Battery Life: 3 hr Display: Color LCD Monitor with 854 x480 Resolution Screen Resolution: 854 x 480 Max Camera Resolution: 1280 x720p Digital Zoom: Yes Recording Capability: Still Image and Video IP Rating: IP67 (Camera Only) Included: Borescope; 5.5mm Camera Probe with 10' (3m) Cable; USB Cable; Camera Accessories: Magnet, Hook, Mirror; Carrying Case Weight: 8.6 oz (244 g) UPC: 092644694615 Document Brochure

Description Klein Tools' Cat. No. ET45VP Kit includes an Electronic Voltage Tester, Cat. No. ET45 and a Receptacle Tester, Cat. No. RT210. The ET45 is designed as a simple, easy to use tester to check, verify or troubleshoot common residential electrical wiring in electrical outlets, light fixtures, doorbells and more. This tester does not require batteries, and features a pocket clip for convenient carrying. The RT210 is designed to detect the most common wiring problems in standard and GFCI receptacles. A convenient chart on the tester helps determine wiring condition in outlet, based on LED lights results. Conditions indicated: open ground, reverse polarity, open hot, open neutral, hot / ground reversed. Benefits Electronic voltage tester is designed to test AC voltages from 24 to 240V AC at four useful levels Tests DC voltages from 32 to 330V at four levels Built-in test lead holder on back of voltage tester holds the leads in one of two positions: one so that they are spaced correctly to test tamper-resistant US-style outlets and the other for convenient storage of the test leads Batteries not required; voltage tester is powered by the applied voltage Voltage tester is rated CATIII 350V, Class 2, Double insulation and has IP44 ingress protection Receptacle tester detects the most common wiring problems in standard and GFCI receptacles Works on GFI outlets and confirms operation of the ground fault protective device Nominal Voltage of receptacle tester: 110/125V AC at 50/60Hz in 3-wire outlet Technical Information Type: ET45: Electronic Products; RT210: GFCI and Standard Receptacle Tester Application: Measure AC/DC Voltage and Determine Wiring Condition in Outlet Special Features: ET45: Built-in Test Lead Holders; RT210: Convenient Chart on the Tester Material: Plastic Housing, PCB with Electronic Components Drop Protection: ET45: 9.9' (3 m); RT210: 6.6' (2 m) Display: ET45: Analog LED Voltage: ET45: AC Level Indicators: 24V, 48V, 120V, 240V; DC Level Indicators: 32V, 64V, 160V, 330V; RT210: 110/125V AC at 50/60Hz in. 3-Wire Outlet Frequency: ET45: 50/60 Hz Ingress Protection: ET45: IP44 Pollution Degree: ET45: 2 Integral Lead Storage: ET45: Yes Interchangeable Leads: ET45: No Lead Length: ET45: 9'' (23 cm) Standard: ET45: CATIII 350V, CE Included: ET45: Electronic Voltage Tester; RT210: Receptacle Tester Overall Length: ET45: 4.45'' (11.3 cm); RT210: 1.62'' (4.1 cm) Overall Height: ET45: 1.19'' (3 cm); RT210: 2.88'' (7.3 cm) Overall Width: ET45: 1.05'' (2.7 cm); RT210: 1.88'' (4.8 cm) Weight: ET45: 1.8 oz (52.0 g); RT210: 1.9 oz (54 g) Documents Brochure Brochure Instructions Instructions

Description Klein Tools ET130 is an easy-to-use precision light meter that measures illuminance levels in both Foot Candles (FC) and Lux. Backlit LCD display screen with bar graph assists when monitoring light levels and for retrofit projects. Includes custom carrying pouch and 9V battery. Benefits Easy-to-operate meter to monitor light levels Measurements in foot candles (FC) and Lux Auto and manual range: 4000 FC; 40,000 Lux Features backlit LCD display with 40-segment bar graph Data hold, Max/Min, and Auto Power Off Includes carrying pouch and 9V battery Technical Information Type: Digital Light Meter Application: Measures Illuminance Levels in Foot Candles (FC) and Lux Features: Auto Power-Off Batteries: 1 x 9V Display: Backlit LCD Overall Length: 8.09'' (20.6 cm) Overall Height: 1.41'' (3.6 cm) Overall Width: 2.09'' (5.3 cm) Weight: 5.50 oz (156.0 g) Documents Digital Light Meter Specification sheet

Description The IDEAL 61-535 is a 120V AC Circuit Breaker Finder that automatically identifies a circuit breaker/fuse protecting a live branch circuit. It consists of a transmitter and a receiver. The Transmitter sends a signal over the conductors when connected to an energized circuit. It also identifies the presence of power and indicates corrector/incorrect wiring conditions via illuminated Green and Red LED’s and contains a GFCI Trip Tester. The receiver reads the transmitter’s signal and identifies the breaker/fuse energizing the circuit by illuminating a flashing green LED and emitting beeps once it determines the breaker/fuse with the strongest signal. The receiver also senses the presence of AC voltage (60 - 600 V AC) via and non-contact voltage (NCV) sensor in the tip. The receiver indicates the presence of AC voltage by illuminating a red flashing LED and emitting a beeping sound. The audible tone for both the breaker finding mode and the NCV mode can be muted via a button for working in noise sensitive areas. The receiver also includes a work light that can be operated independently for work in poorly lit conditions. Technical Information Color: Yellow CSA Listing: C22.2 No. 160 Audible Indicator: Yes Auto Power Off: Yes Battery Type: 9V CAT Rating: CATII 150V Correct Wiring Fault: Yes Flashlight: Yes Frequency: No GFCI Trip Test: Yes GFCI Trip Test Indicator: Yes Impedance: No Low Battery Indicator: Yes NCV: Yes Neutral Ground Voltage: No Polarity Indicator: Yes Power Consumption: 1.5W max. @ 120V AC Supply Frequency: 60HZ Visual Indicator: Yes Warranty: 2-Year Document Brochure Manual

Description The Fluke 2AC is the latest addition to the VoltAlert™ AC non-contact voltage tester family. It is designed to be pocket-sized and easy to use. The tip of the pocket-sized tester will glow red when within close proximity of an outlet, terminal strip, or power cord where voltage is present. The 2 AC is always on, with a battery check function to make sure the tester is working properly. * * Use of Battery Check function is optional and for convenience only, it is not intended as a substitute for checking the unit on a known live source before and after use. Features Non-contact voltage detection from 90 to 1000 V AC Innovative 'Battery Check' ensures battery is in good condition* Integrated clip design, optimized for pocket storage CAT IV 1000 V overvoltage rated product for best in class user protection Suitable for a wide range of residential, commercial and industrial needs Fluke ruggedness and reliability with a two-year warranty Technical Information Specifications Operating Principles Senses the steady state electrostatic field produced by AC voltage through insulation without requiring contact to the bare conductor. A red glow at the tip indicates the presence of voltage. Safety Compliance Meets IEC 61010-1:2001, UL 61010-1 (2nd ed.), CAN/CSA-C22.2 No. 61010-1-04, and ISA-82.02.01 Pollution Degree 2 EMC Compliance Meets IEC 61326-1:2006 Operating 90 V AC to 1000 V AC, CAT IV 1000 V rated Temperature (Operating and Storage) -10°C to 50°C (-14°F to 122°F) Operating Humidity Ranges 0% to 95% (0°C to 30°C) 0% to 75% (30°C to 40°C) 0% to 45% (40°C to 55°C) Altitude 2000 m (CAT IV 1000 V) Cleaning Clean with damp cloth Battery Life Typical battery life of greater than one year Warranty Period Two years Document Datasheet Instruction Manual

Description The NCVT-4IR provides non-contact determination of AC voltage in cables, cords, circuit breakers, switches, outlets and wires; as well as infrared (IR) thermometer measurements, making it the perfect choice for HVAC professionals. Benefits Designed specifically for HVAC applications Provides non-contact determination of AC voltage in cables, cords, circuit breakers, switches, outlets, and wires, as well as AC voltage in security, entertainment, communications, environmental control, and irrigation systems Detects AC voltage from 12 to 1000V with visual and audible indicators 4: 1 distance-to-spot ratio IR thermometer with user selectable Degrees Fahrenheit or Degrees Celcius from -22 to 482 - Degree Fahrenheit (-30 to 250-Degree Celcius) Convenient laser pointer to target measurement area for temperature measurement Backlight LCD display with 0.1-Degree resolution Auto power-off conserves and extends battery life Screw-thread battery cap with O-ring ensures dust and water resistance Lightweight, compact tool with pocket clip provides easy storage and quick access Technical Information Type: Non-Contact Application: HVAC Special Features: High-Pitched Continuous Beeping Sound Voltage: 12 - 1000V AC Frequency: 50 - 500 Hz Ingress Protection: 54 Standard: CAT IV 1000V Included: Batteries Batteries: 2 x AAA Battery Life: Average: 134 Hours; Continuous IR: 64 Hours Overall Length: 6.25'' (15.9 cm) Overall Height: 1.25'' (3.2 cm) Overall Width: 1.19'' (3 cm) Weight: 2.00 oz (57.00 g) Documents Klein Tools Non-Contact Voltage w. Infrared Thermometer Brochure Klein Tools Non-Contact Voltage w. Infrared Thermometer Instruction Manual

Description The MM320KIT Digital Multimeter Electrical Test Kit from Klein Tools is designed with reliability and safety in mind. This comprehensive kit comes with MM320 Digital Multimeter, NCVT-3P Non-Contact Voltage Tester with Flashlight, ET45 Voltage Tester, RT210 GFCI Receptacle Tester, a padded storage pouch and all required batteries. All offered in one kit for value and convenience. Features Digital Multimeter measures up to 600V AC/DC voltage, 10A DC current and 2 ohm resistance Meter also test batteries, diodes, and continuity Voltage Tester NCVT-3P has dual-range capabilities to detect from 12 to 1000 V AC or 70 to 1000V AC for a broad variety of low-voltage or standard voltage applications Bright flashlight illuminates work area and may be used independent of NCVT-3P voltage detection function ET45 tests AC voltages from 28V to 240V AC at four useful levels aligned with commonly used residential voltages, and DC voltages from 32V to 330V at four common levels Built-in test lead holder on back of ET45 holds the leads in one of two positions: one so that they are spaced correctly to test tamper-resistant US-style outlets and the other for convenient storage of the test leads RT210 detects the most common wiring problems in standard and GFCI receptacles including open ground, reverse polarity, open hot, open neutral and hot/ground reversed Receptacle tester works on GFCI outlets and confirms operation of the ground fault protective device Technical Information Type: Digital Multimeter Electrical Kit Application: Multimeter Measures up to 600V AC/DC Voltage, 10A DC Current and 2MΩ Resistance. Tests Batteries, Diodes, and Continuity Special Features: MM320: Auto Power-Off Material: ABS/Electronics Batteries: 2 x AAA Drop Protection: 3.3' (1 m) Display: MM320: 2000 Count LCD Functions: Hold Voltage: 600V AC/DC Current: 10A Ohms (Resistance): 2MΩ Standard: CAT III 600V; CE Included: MM320 Auto-Ranging Digital Multimeter with Right-angle Test Leads; NCVT3P Dual Range Non-Contact Voltage Tester with Flashlight; ET45 AC/DC Voltage Tester; RT210 GFCI Receptacle Tester; Carrying Case; Instructions; and All Required Batteries Overall Length: 6.39'' (162.4 cm) Overall Height: 1.80'' (45.7 cm) Overall Width: 3.12'' (79.4 cm) Weight: 8.2 oz (231 g) Document Brochure MM320 Instruction NCVT-3P Instruction ET45 and RT210 Instruction

Description The Klein Tools TI290 is a high resolution, Wi-Fi enabled, professional model USB rechargeable Thermal Imager. The large LCD displays unseen hot and cold spots for instant troubleshooting. Excellent resolution with over 49,000 pixels and your choice of three color palettes. The meter provides high and low temperature points, crosshairs to pinpoint specific temperatures, and options for temperature alarms. App is available for free in Google Play™ store and in the App Store. Features Thermal Imager has over 49,000 pixels to troubleshoot hot and cold spots Easily capture, store and share thermal images with Wi-Fi capabilities User selectable high and low temperature alarms from -4 to 752-Degree Fahrenheit (-20 to 400-Degree Celsius) Adjustable emissivity from 00.1 to 0.99 Select color palettes to best capture the event; ironbow, rainbow, or grayscale Rechargeable lithium-ion battery App is available for free in Google Play™ store and in the App Store Includes thermal imager, USB-C charging cable, molded soft-storage case with carabiner, and instructions Durable 6.6-Foot (2 m) drop test protection Technical Information Type: Thermal Imager Application: View Hot and Cold Spots for Instant Troubleshooting Special Features: Wi-Fi Transfer, High and Low Temperature Points, Crosshairs to Pinpoint Specific Temperatures, Options for Temperature Alarms, 3 Color Palettes Display: 3.5'' (8.9 cm) TFT LCD Display Resolution: 49,152 Pixels Sensor Type: VOx Microbolometer Sensor Resolution: 49,152 Pixels Thermal Sensitivity: <50 mK Spectral Range: 8 to 14μm Temperature Range: -4° to 752°F (-20° to 400°C) Accuracy: ±2°C (±3.6°F) or 2%, Whichever is Greater Field of View: 55.6° +/- 2.8° Emissivity: 0.01 to 0.99 Color Palettes: Ironbow, Rainbow, Grayscale Photo Capture: Yes and Wi-Fi Data Transfer Maximum Frames per Second: <9 Hz Memory: 10,000 Images Batteries: Lithium-Ion Included: Rechargeable Thermal Imager, USB Charging Cable,Molded Soft-Storage Case with Carabiner, and Instructions Overall Length: 3.1'' (8 cm) Overall Width: 1.06'' (3 cm) Overall Height: 4.48'' (11.4 cm) Material: ABS and Electronic Components Standards: CE and UKCA Weight: 7.5 oz (213 g) Battery Life: 5 yr Document Brochure Instruction

Description Klein Tools CL445 Clamp Meter is an advanced HVAC clamp meter with automatically ranging true root mean square (TRMS) for maximum accuracy. The meter measures AC current, inrush current, AC/DC voltage, DC microamps, resistance, continuity, frequency, capacitance, temperature, diodes, and more. This Digital Clamp Meter can simultaneously measure current and voltage, has a built-in worklight and comes with right-angle input test leads, push-on alligator clips, K-Type thermocouple, storage pouch, instructional manual, and 3 x AAA batteries. Features CL445 HVAC Clamp Meter is an automatically ranging true root mean square (TRMS) digital clamp meter Digital clamp measures 600 A AC current and inrush current Test leads measure 750V AC/600V DC voltage, DC micro amp, resistance, continuity, frequency, duty-cycle, capacitance, and diode tests K-Type thermocouple port for measuring temperature from -148 to 1832-Degree Fahrenheit (-100 to 1000-Degree Celsius) Detect AC current with non-contact voltage tester integrated into the clamp jaw Backlit LCD with dual V + A function allows simultaneous viewing of voltage and current measurements Dedicated mode for capturing DC micro amp and inrush current Meter has a built-in worklight to illuminate in low light areas CAT IV 600V, CAT III 750V, Class 2, Double insulation safety rating Includes right-angle input test leads, push-on alligator clips, K-type thermocouple, storage pouch, instruction manual, and 3 x AAA batteries Can be used with Magnetic Hanger (Cat. No. 69417, sold separately) for hands free operation Technical Information Type: HVAC TRMS Clamp Meter Application: Measures AC Current, Inrush Current, AC/DC Voltage, DC Microamps, Resistance, Continuity, Frequency, Capacitance, Temperature, Diodes, and More Special Features: Automatically Ranging True Root Mean Squared (TRMS) Measurement Technology for Accuracy; NCVT; V + A Simultaneously Displayed; Built-in Worklight Material: ABS/Electronics Batteries: 3 x AAA Auto-Power Off: Yes Jaw Size: 1.25'' (3.2 cm) Drop Protection: 6.6' (2 m) Display: 6000 Count LCD Functions: TRMS, AC Current, Inrush Current, AC/DC Voltage, DC Microamps, Resistance, Audible Continuity, Frequency, AC Voltage + AC Amperage, Capacitance, Temperature, Non-Contact Voltage Testing, Diodes, Min/Max, Data Hold Capability Voltage: 750V AC; 600V DC Frequency: 60 kHz Current: 600A Capacitance: 6.000mF Ohms (Resistance): 60MΩ AC Voltage: 750V DC Voltage: 600V DC Polarity Indicator: Yes DC Micro-Amp: 600µA Temperature Range: -148° to 1832°F (-100° to 1000°C) Standard: CAT IV 600V, CAT III 750V, Class 2, Double Insulation Safety Rating Included: Clamp Meter; Right-Angle Input Test Leads; Push-On Alligator Clips; K-Type Thermocouple; Storage Pouch; Instruction Manual; and 3 x AAA Batteries Overall Length: 9.24'' (23.5 cm) Overall Height: 1.59'' (4 cm) Overall Width: 3.77'' (9.6 cm) Weight: 12.5 oz (355 g) Document Brochure User's Manual

Description Klein Tools Multimeter Test Kit contains Cat. No. MM300 (Manual-Ranging Digital Multimeter), Cat. No. NCVT1P (Non-Contact Voltage Tester) and Cat. No. RT105 (Receptacle Tester). The MM300 measures DC current, AC/DC voltage and resistance. The NCVT-1P automatically detects standard voltage in cables, cords, circuit breakers, lighting fixtures, switches, outlets, and wires. The RT105 detects the most common wiring problems in standard receptacles. Features The MM300 multimeter measures AC/DC voltage, DC current and resistance and has a safety rating of CAT III 600V, Class 2, Double insulation Non-Contact Voltage Tester Cat. No. NCVT1P has a bright green LED to indicate the tester is working; it changes to red and audible tones sound when voltage is detected NCVT1P has a high intensity, bright red LED that illuminates and an audible tone when voltage is detected from 50 to 1000V AC power operating range Receptacle tester detects wiring configurations and indicates correct wiring, and identifies common wiring faults Identifies open ground, open hot, open neutral, hot/ground reversed; it does not indicate quality of ground, multiple hot wires, or a combination of defects MM300 multimeter tests continuity with visual and audible continuity indicators Test leads included for Cat. No. MM300; batteries included for Cat. Nos. NCVT1P and MM300 Technical Information Type: Electrical Test Kit Application: Testing and Measuring Voltage Special Features: MM300: Low Battery Indicator; NCVT-1P: Pocket Clip Overall Length: 6'' (15.2 cm) Overall Height: 1.78'' (4.5 cm) Overall Width: 3.16'' (8 cm) Material: Polymer Body and Electronic Components Batteries: MM300: 2 x AAA; NCVT-1P: 2 x AAA Included: Manual-Ranging Multimeter, 600V (Cat.No. MM300), Non-Contact Voltage Tester Pen, 50 to 1000V AC (Cat. No. NCVT-1P), Receptacle Tester with Test Leads and Batteries (Cat. No. RT105) Standard: MM300: CAT III 600V; NCVT-1P: CAT IV 1000V Weight: 8.2 oz (231 g) Document RT105 Instruction NCVT1P Instruction MM300 Instruction Multimeter Selection Chart

Description Receptacle Tester is very useful testing for correct wiring, open ground, reverse polarity, open hot, open neutral, and hot/ground reversed. This tester maximizes comfort with its non-slip ergonomic design. Benefits Tests for correct wiring in 3-wire receptacles Warns against faulty wiring in 3-wire receptacles Non-slip ergonomic design for maximum comfort Tough and impact-resistant case Tests GFI receptacles for proper operation Premium neon lamps prevent false readings Technical Information AC Voltage Range: 120VAC Colour: Yellow Measurement Accuracy: +/-0.5% Documents Product Instructions

Description Klein Tools ET10 is a digital thermometer that takes ambient and direct-contact readings in both Fahrenheit (°F) and Celsius (°C) scales. The rugged, portable design with magnet makes it a practical choice of HVAC field service teams. Magnet inside base of probe attaches easily to air vents. The protective sheath cleverly serves as a handle to extend reach. Benefits Magnet inside base of probe to easily attach to vents Range -40 to 572-degrees F (-40 to 300-degrees C) User selectable Fahrenheit and Celsius temperature measurements Backlit display for easy viewing in low light Not a medical device; thermometer is NOT intended for use on people or animals. Max/Min, Hold and Average functions Auto-power off after 15 minutes conserves battery life 3 inch stainless steel probe with removable protective sheath that doubles as a handle Lightweight, compact tool with pocket clip provides easy storage and quick access Technical Information Type: Magnetic Digital Thermometer Application: Ambient Air and Direct-Contact Temperature Special Features: Magnet to Hold Onto Air Vents; Max/Min, Hold, and Average Functions Material: Stainless Steel Probe; FDA GRAS Compliant Batteries: 2 x LR44 Accuracy: -40 to -20 Deg C +/- 2 Deg C; 19 to 150 Deg C +/- 1.5 Deg C; Above +/- 3 Deg C Display: Digital Range: -40°F to 572°F (-40°C to 300°C) Response Time: 3 Seconds Overall Length: 6.5'' (16.5 cm) Overall Height: 0.97'' (2.5 cm) Overall Width: 1.25'' (3.2 cm) Included: Pocket Thermometer; Batteries Weight: 1.50 oz (42.5 g) Documents Brochure Instruction

Description Trace and locate network cables more effectively within bundles, at switches, patch panels or termination blocks. The Klein Tools Digital Tone and Probe Set offers digital and analog signaling all in one toner and probe. Designed with powerful cable tracing and locations technology for any work environment. Use the digital mode to trace and locate data cables on active networks. Use the analog mode to isolate individual wire pairs and trace voice, data, video and audio cables. Features Digital Tone Generator (Cat. No. VDV500-163) and Digital Wire Tracing Probe (Cat. No. VDV500-223) Set Trace and locate cables on an active network Tone on cables connected to a switch or router without disconnecting cables Rugged Angled Bed of Nails (ABN) to trace on unstripped wires Wire mapping capabilities to check Pin-to-Pin connections with shield detection 60Hz filter for accurate tracing Includes tone generator, tracing probe, various leads for testing, batteries, and instruction manual Technical Information Type: Tone Generator, Tracing Probe Application: Wire Toning and Tracing Special Features: Angled Bed of Nails with (ABN) Clips, RJ45 Port, 3 Distinct Cadences, Worklight Overall Length: 6.8'' (17.3 cm) Overall Height: 13.3'' (33.8 cm) Overall Width: 3'' (7.6 cm) Material: ABS Batteries: 8 x AAA Included: VDV500-163 Digital Tone Generator; VDV500-223 Digital Tracing Probe; Pouch; Test Leads; Instructions; and All Required Batteries Weight: 1.4 lb (0.6 kg) Document Brochure

Description The Klein Tools RT390 is a Circuit Analyzer that tests the wiring conditions at an electrical outlet, displays AC line voltage, inspects AFCI and GFCI devices with time to trip device, and performs voltage drop tests at 12A, 15A and 20A current loads. Results are easy to understand with large, color LCD. The tester is designed for use with North American 120V AC 3-wire electrical outlets. Features Circuit Analyzer with large color LCD displays easy to understand results for wiring faults, AFCI, GFCI, voltage drops and time to trip devices Detect and identify common wiring faults in standard, AFCI and GFCI electrical outlets Detects dual (open neutral/open ground) wiring faults Inspect AFCI and GFCI devices; includes trip time and trip current 12A, 15A, and 20A load testing to measure percentage voltage drops Powers off automatically after 5 minutes of inactivity to conserve battery life Detachable cord for easy storage For use with North American 120V AC 3-wire electrical outlets Safety Rating: CAT III 135V Technical information Type: Circuit Analyzer Application: Test Wiring Faults, Inspects AFCI and GFCI Devices, Displays Line Voltage, Voltage Drop Special Features: Tests AFCI and GFCI, Large LCD Display, Detects Dual-Open Wiring Fault, Shows Amount of Time it Takes to Trip GFCI Material: ABS Plastic, Overmold, Electronic Components Drop Protection: 6.6' (2m) AFCI: Yes GFCI: Yes Voltage: 135V AC Batteries: 3 x AAA Alkaline Included: 3 x AAA Batteries, Instructions, and Pouch Standard: CAT III 135V Overall Length: 1.5'' (17.9 cm) Overall Height: 7.1'' (3.9 cm) Overall Width: 2.7'' (6.9 cm) Weight: 10.9 oz (311 g) Document Brochure Instruction

Description The Fluke 378 FC true-rms clamp meter uses FieldSense™ technology to make testing faster and safer, all without contacting a live conductor. You get accurate voltage and current measurements through the clamp jaw. Simply clip the black test lead to any electrical ground, put the clamp jaw around the conductor and see reliable, accurate voltage and current values on the display. It includes a unique PQ function that senses power quality issues automatically. When making FieldSense measurements, the 378 FC will detect and display power quality issues, relating to current, voltage, power factor or any combination of the three. Now you can quickly determine if an upstream supply problem exists, or if there is a downstream equipment problem. The included iFlex flexible current probe lets you measure ac current as high as 2500 A. Crowded wiring cabinets and large conductors are easily measured with the iFlex probe. Your job will get easier when you use the 378 FC clamp meter. The display turns green when a stable FieldSense measurement is detected. Visual Continuity also provides a bright green screen for easy detection of continuity in noisy work areas. Features Measure voltage and current with your clamp jaw Faster, safer testing - all without touching a live wire - using FieldSense™ technology Power quality indicator shows whether equipment or power line is faulty Complete 3-phase voltage and current tests in 3 quick steps Values are displayed on your smart phone and saved to the cloud via Fluke Connect software Phase rotation auto-calculated and shown on the Fluke Connect software No more hand-written notes or complicated math. Technical Information General specifications General Maximum Voltage between any Terminal and Earth Ground 1000 V Battery Type 2 AA IEC LR6 alkaline Life 200 hour Display Dual readout Automatic Power Off 20 minutes Electrical AC Current: Jaw Range 999.9 A Resolution 0.1 A Accuracy 2 % ±5 digits (45 Hz to 66 Hz) Crest Factor (50/60 Hz) 3 @ 500 A 2.5 @ 600 A 1.42 @ 1000 A Add 2 % for C.F. >2 AC Current: Flexible Current Probe Range 2500 A Resolution 1 A (≤2500 A) 0.1 A (≤999.9 A) Accuracy 3 % ±5 digits (5 Hz to 500 Hz) Crest Factor (50/60Hz) 3.0 at 1100 A 2.5 at 1400 A 1.42 at 2500 A Add 2 % for C.F. >2 Position Sensitivity Distance from Optimum i2500-10 Flex i2500-18 Flex Error A 0.5 in (12.7 mm) 1.4 in (35.6 mm) ± 0.5 % B 0.8 in (20.3 mm) 2.0 in (50.8 mm) ± 1.0 % C 1.4 in (35.6 mm) 2.5 in (63.5 mm) ± 2.0 % Measurement uncertainty assumes centralized primary conductor at optimum position, no external electrical or magnetic field, and within operating temperature range. DC Current Range 999.9 A Resolution 0.1 A Accuracy 2 % ±5 digits 1 [1] When using the ZERO function to compensate for offsets AC Voltage: Field Sense Range 1000 V Resolution 1 V (≤1000V) Accuracy ≤4/0 AWG 3 % ±5 digits (45 Hz to 66 Hz) ≥4/0 AWG 5 % ±5 digits (45 Hz to 66 Hz) Position wire as close as possible to jaw opening (see illustration). AC Voltage: Test Leads Range 600.0 V 1000 V Resolution 0.1 V (≤600.0 V) 1 V (≤1000 V) Accuracy 1 % ±5 digits (20 Hz to 500 Hz) DC Voltage Range 600.0 V 1000 V Resolution 0.1 V (≤600.0 V) 1 V (≤1000 V) Accuracy 1 % ±5 digits mV dc Range 500.0 mV Resolution 0.1 mV Accuracy 1 % ±5 digits Amps Frequency: Jaw Range 45 Hz to 66 Hz Resolution 0.1 Hz Accuracy 0.5 % ±5 digits Trigger Level 5 Hz to 10 Hz, ≥10 A 10 Hz to 100 Hz, ≥ 5 A 100 Hz to 500 Hz, ≥ 10 A Amps Frequency: Flexible Current Probe Range 5.0 Hz to 500.0 Hz Resolution 0.1 Hz Accuracy 0.5 % ±5 digits Trigger Level 5 Hz to 20 Hz, ≥25 A 20 Hz to 100 Hz, ≥20 A 100 Hz to 500 Hz,≥25 A Resistance Range 60.00 kΩ 6000 Ω 600.0 Ω Resolution 0.1 Ω (≤600.0 Ω) 1 Ω (≤6000 Ω) 10 Ω (≤60.00 kΩ) Accuracy 1 % ±5 digits Capacitance Range 1000 μF Resolution 0.1 μF (≤100.0 μF) 1 μF (≤1000 μF) Accuracy 1 % ±4 digits Mechanical Size (L x W x H) 274 mm x 86 mm x 47 mm Weight (with Batteries) 463 g Jaw Opening 34 mm Flexible Current Probe Diameter 7.5 mm Flexible Current Probe Cable Length (head to electronics connector) 1.8 m Rogowski Coil Length 450 mm Environmental Operating Temperature -10 °C to 50 °C Storage Temperature -40 °C to 60 °C Operating Humidity (without condensation) Non condensing (28 °C or <18 °C Ingress Protection IEC 60529: IP30 (jaw closed) Operating Altitude 2000 m Storage Altitude 12 000 m Electromagnetic Compatibility (EMC) International IEC 61326-1: Portable Electromagnetic Environment IEC 61326-2-2, CISPR 11: Group 1, Class B Group 1: Equipment has intentionally generated and/or uses conductively-coupled radio frequency energy that is necessary for the internal function of the equipment itself. Class B: Equipment is suitable for use in domestic establishments and in establishments directly connected to a low voltage power supply network which supplies buildings used for domestic purposes. Emissions that exceed the levels required by CISPR 11 can occur when the equipment is connected to a test object. Korea (KCC) Class A equipment (Industrial Broadcast & Communications Equipment) Class A: Equipment meets requirements for industrial electromagnetic wave equipment and the seller or user should take notice of it. This equipment is intended for use in business environments and not to be used in homes. USA (FCC) 47 CFR 15 subpart B. This product is considered an exempt device per clause 15.103. Safety General IEC 61010-1: Pollution degree 2 Measurement IEC 61010-2-032: CAT III 1000 V / CAT IV 600 V IEC 61010-2-033: CAT III 1000 V / CAT IV 600 V Current Clamp for Leakage Current Measurements IEC 61557-13: Class 2, ≤30 A/m Wireless Radio Radio Frequency Certification FCC ID: T68-FBLE IC:6627A-FBLE Frequency Range 2405 MHz to 2480 MHz Output Power <100 mW Radio Frequency Data Radio Frequency Data For Class A Devices SIMPLIFIED EU DECLARATION OF CONFORMITY Hereby, Fluke declares that the radio equipment contained in this Product is in compliance with Directive 2014/53/EU. The full text of the EU declaration is available at the following internet address: https://dam-assets.fluke.com/s3fs-public/FLK_RED_1aeng0900.pdf . Document User's manual Quick Reference

Description Twist. Test. Stay Safe. The Fluke TL175 TwistGuard™ Test Leads offer adjustable length test tips for use in different measurement environments. By simply twisting the test lead the user can change the exposed probe tip length from 19 mm to 4 mm (0.75 in to 0.16 in). “ They work well, are very durable, and add a whole new level to safety…along with the ability to twist them to expose the entire probe for more traditional feel while testing ”- S.C., verified customer The adjustable tip shroud meets new electrical safety requirements to reduce tip exposure while providing the versatility needed for most measurements. The correct category rating for the tip exposure being used is always visible on the test leads. This makes the TL175 test leads suitable for use in many environments: CAT II 1000 V CAT III 1000 V CAT IV 600 V WearGuard™ lead wire wear indicator makes it easier to see insulation wear and tear. If the inner, white insulation layer shows through the outer, black layer, damage is indicated, and the leads must be replaced. The silicone insulation withstands high temperatures and remains flexible in cold temperatures. While the universal input plugs are compatible with all instruments that accept standard 4 mm shrouded banana plugs. Features Patented TwistGuard™ reduces tip exposure New WearGuard™ silicone leads indicate when to replace leads Heavy-duty strain relief tested to 30,000+ bends without failure Document Datasheet Instruction Manual

Description The Fluke 323 clamp meter is a good basic troubleshooting tool for commercial and residential electricians. It includes True RMS measurements, optimized ergonomics, and large display for efficient troubleshooting. It's designed to perform in the toughest environments and provide noise-free, reliable results, so you can trust it to help you confidently diagnose problems almost anywhere. Use it to verify the presence of load current, AC voltage, and continuity of circuits, switches, fuses and contacts. Its slim, compact size and rugged design make it well suited for measuring current up to 400 A in tight cable compartments. The Fluke 323 comes with a two-year warranty and a soft carrying case. Features Rugged, reliable basic True-RMS clamp meter for measuring current up to 400 A Measures AC current to 400 A Measures AC voltage and DC voltage to 600 V Provides True RMS AC voltage and current for accurate measurements on non-linear signals Measures resistance to 4 kΩ with continuity detection Features slim, ergonomic design for measuring in tight cable compartments Presents measurements on a large, easy-to-read display Hold function captures a reading on the display Features a CAT III 600 V, CAT IV 300 V safety rating Comes with a two-year warranty and soft carrying case Technical Information Specifications AC current Range 400.0 A Accuracy 2% ± 5 digits (45 Hz to 65 Hz) 2.5% ± 5 digits (65 Hz to 400 Hz) DC current Range - Accuracy - AC voltage Range 600.0 V Accuracy 1.5% ± 5 digits DC voltage Range 600.0 V Accuracy 1.0% ± 5 digits Resistance Range 400.0 Ω/ 4000 Ω Accuracy 1.0% ± 5 digits Continuity ≤ 70 Ω Capacitance - Frequency - AC response True-RMS Backlight - Data hold Yes Contact temperature - Min/Max - Size H x W x D (mm) 207 x 75 x 34 Max wire diameter 30 mm (600 MCM) Weight 265 g Category rating CAT III 600 V CAT IV 300 V Warranty Two-year Document User's Manual Quick Reference Brochure

Description Klein Tools MM720 Multimeter is an automatically ranging true root mean squared (TRMS) digital multimeter that measures AC/DC voltage, AC/DC current, and resistance. It can also measure temperature, capacitance, frequency, duty-cycle, diodes and continuity. It features a high visibility, reverse contrast LCD display with an optical sensor to automatically optimize viewability in dark or bright ambient lighting. Features Multimeter with automatic ranging true root mean square (TRMS) technology for increased accuracy Tester measures up to 1000V AC/DC voltage, 10A AC/DC current and 60 MOhms resistance plus temperature, capacitance, frequency, low impedance (LoZ), duty-cycle, test diodes and continuity High visibility, reverse contrast display with optical sensor to automatically optimize viewability in dark or bright ambient lighting Low Impedance (LoZ) mode for identifying and eliminating ghost or stray voltages Low battery indicator and easily accessible battery and fuse compartment Tough meter built to withstand a 6.6-Foot (2 m) drop and is rated IP42 Includes carrying pouch, test leads, thermocouple with adapter, and batteries CAT IV 600V Safety Rating For use in basic and controlled electromagnetic environments such as residential, business and light-industrial locations Technical Information Type: Digital Multimeter Application: Testing and Measuring Voltage Special Features: High-Visibility Display with Optical Sensor; Auto-Range; Min/Max/Relative; Low Impedance (LoZ) Mode; Auto Power-Off; Data Hold Material: ABS, Electrical Components Batteries: 2 x AAA Drop Protection: 6.6' (2 m) Display: 6000 Count LCD Color: Orange/Black Functions: Measures up to 1000 VAC/DC Voltage, 10A AC/DC Current and 60MΩ Resistance Plus Temperature, Capacitance, Frequency, Duty-Cycle, Diodes and Continuity Voltage: 1000V AC/DC Frequency: 1 Hz - 500 KHz Current: 10A AC/DC Capacitance: 6000 µF Ohms (Resistance): 60MΩ Ingress Protection: IP42 Standard: CAT IV 600V; CAT III 1000V Temperature Range: -40° to 1832°F (-40° to 1000°C) Included: Carrying Case, Test Leads, Thermocouple, Batteries, and User Manual Overall Length: 6.94'' (17.6 cm) Overall Height: 1.88'' (4.7 cm) Overall Width: 3.37'' (8.5 cm) Weight: 12.2 oz (345 g) Document Multimeter Selection Guide Instruction

Description This Coax Installation and Cable Testing Kit contains everything you need to prepare, connect and test coaxial cables: The VDV110-061 cable stripper prepares multiple types of cable in common voice/data/video applications and features an exclusive sliding depth gauge and variable stripping capability. The VDV212-008SEN compact compression crimper is an advanced DIY tool for fast, reliable F-connector installation that provides fast insertion and removal of cable and connector. The VDV512-100 Coax Explorer 2 verifies proper continuity of F-connector coaxial cables and maps their location, and the 6 included Universal F Compression Connectors provide excellent holding power and signal strength you require. Benefits Includes tools needed to prepare, connect and test coax cables 2-Level Radial Stripper is designed for easy single operation coax cable preparation Compact Crimper quickly and reliably crimps compression F-connectors (6-Pack included) Coax Explorer 2 tests and verifies the connections (good/open/short) Patented universal sleeve compression F-connectors (RG6/6Q) install up to 5X faster Technical Information Cable Type: RG6/RG6-QS Included: 1 Coax Cable Stripper 2-Level, Radial (Cat. No. VDV110-061); 1 Compression Crimper - Compact, F-Connector (Cat. No. VDV212-008); 1 Coax Explorer Tester (Cat. No. VDV512-057); 6 Universal F Compression Connectors - RG6/RG6-Q Weight: 1.1 lb (0.5 kg)

Description The Klein Tools IR07 is a dual IR (infrared) thermometer and probe thermometer. This rugged pocket thermometer measures temperature from -40 to 572-Degrees Fahrenheit (-40 to 400-Degrees Celsius) for both IR and probe measurements. The IR thermometer has a Distance-to-Spot ratio of 8:1 and the target laser can also be used as a laser pointer. The Probe accurately measures air, liquid and surface temps and has a convenient hook for hands free indoor measurements. The IR07 quickly calculates differential temperature (T1-T2) and has a backlit LCD for easy viewing in low light. Benefits Capable of measuring temperature from -40 to 572 Degrees Fahrenheit (-40 to 400 Degrees Celsius) Accurately measure surface temperature with Infrared Thermometer (DS ratio 8:1) Measure air vents and duct temperatures using temperature probe with hands-free hanging hook Temperature probe also can measure liquid temperatures Not a medical device; thermometer is NOT intended for use on people or animals. Target laser may be used as a laser pointer Quickly calculates differential temperature (T1-T2) for both IR and probe temperatures Easy-open probe with nub to prevent temperature transfer while opening Backlit display with Hold, Max/Min, APO, and Low Battery functions Includes a pouch, owner’s manual, and 2 x AAA batteries Stainless steel probe is FDA GRAS compliant Certified to IEC EN 61326-1:2013; EN61326-2-3:2013 Technical Information Type: Pocket Infrared Thermometer with Laser and Temperature Probe Application: Temperature Measurement via IR (Infrared) and Probe Special Features: Pocket Sized, IR and Probe Thermometer; Hanging Hook for Use with Air Vents Material: ABS, Polycarbonate Batteries: 2 x AAA Distance to Spot: 8:1 Accuracy: -40 to 0° C: +/-2°; 1 to 300° C: +/- 1°C Calculations: Differential Temperature Max/Min Display: Backlit LCD Display Resolution: 0.1 Response Time: IR <500 ms; Probe <20 s Degree Format: Celsius and Fahrenheit Range: -40° to 572° F (-40° to 300° C) Standard: IEC EN 61326-1:2013; EN61326-2-3:2013 Drop Protection: 2 m Ingress Protection: IP54 Included: IR07 Dual IR and Probe Thermometer; Pouch; Owner’s Manual and 2 x AAA Batteries Overall Length: 5.82'' (14.8 cm) Overall Width: 1.67'' (4.2 cm) Overall Height: 0.95'' (2.4 cm) Weight: 3.60 oz (106.5 g) Documents Brochure Instruction

Description Klein Tools' ET270 is an auto-ranging digital multi-tester that measures AC/DC voltage, resistance, continuity, and performs a battery test. It also tests wiring conditions in standard 120VAC and GFCI electrical receptacles and inspects North American GFCI devices. Comes with Right-Angle Test Leads, Receptacle Test Cord, Instructions, and all required batteries. Features Digital multimeter is auto-ranging and measures AC/DC voltage, resistance, audible continuity, and performs 9V and 1.5V battery tests Detects and identifies common wiring faults in standard and GFCI electrical outlets Inspects GFCI devices, including time to trip the device FIND mode indicates which breaker corresponds to a given receptacle Features include backlit display, data hold, default to auto-range with option for manual-range; max/min Receptacle test is designed for use with North American 120V AC 3-wire electrical outlets Built to withstand a 6.6-Foot (2 m) drop, this meter is designed to be durable and reliable even in demanding working environments Digital Multimeter comes with test leads, receptacle test cord, instructions, batteries, all in a convenient storage pouch Technical Information Type: Digital Multimeter and GFCI Receptacle Tester Application: Testing and Measuring Voltage; Detects and Identifies Common Wiring Problems in GFCI Receptacles Special Features: Data Hold; Auto-Range with Option for Manual-Range; Min/Max Values; Backlight Material: ABS and Electrical Components Batteries: 2 x AAA Drop Protection: 6.6' (2 m) Display: 4000 Count LCD Color: Orange/ Black Functions: AC/DC Voltage; Resistance; Continuity; Battery Test; Finds Breaker to Corresponding Receptacle; Shows Amount of Time it Takes to Trip GFCI; Detects and Identifies Common Wiring Problems in GFCI Receptacles Voltage: 600V AC/DC Frequency: 50 to 60Hz Ohms (Resistance): 40MΩ Standard: CAT III 600V, Class 2, Double insulation Accuracy: 65°F to 83°F (18°C to 28°C): +/- (% of Reading + Number of Least Significant Digits) Included: Digital Multimeter; Right-Angle Test Leads; Receptacle Test Cord; Batteries; User Manual; Storage Pouch Overall Length: 6.41'' (16.3 cm) Overall Height: 1.84'' (4.5 cm) Overall Width: 3.13'' (7.9 cm) Weight: 1.32 lb (0.6 kg) Document Brochure Instruction Manual

Description The Klein Tools ET310TRANS is a replacement Transmitter for the ET310 Circuit Breaker Finder. The ET310 consists of two parts; a Transmitter which is connected to the electrical outlet/circuit and the Receiver which is used to scan the breakers in the panel. The Transmitter features an integrated GFCI Outlet Tester to check for wiring faults. Features Transmitter is a replacement part for the ET310 Circuit Breaker Finder with Integrated GFCI Outlet Tester The ET310 consists of two parts: a Transmitter connected to the electrical outlet or fixture, and a Receiver used to scan the panel to locate the correct breaker The Transmitter also checks for common wiring faults in North American grounded electrical outlets Transmitter incorporates a GFCI tester for tripping GFCI devices The Transmitter may be connected to other electrical fixtures using optional accessories which are sold separately (Cat. No. 69411) Transmitter is powered by the circuit when connected to the electrical outlet or fixture; no batteries needed CAT II 120V safety rating Built to withstand a 6.6-Foot (2 m) drop Technical Information Type: GFCI Receptacle Tester Application: Transmitter to Locate Circuit Breakers, Detects and Identifies Common Wiring Problems in Std and GFCI Receptacles Special Features: Integrated GFCI Outlet Tester Overall Length: 2'' (5.9 cm) Overall Height: 4'' (10.2 cm) Overall Width: 1.4'' (3.6 cm) Material: ABS and Electrical Components Batteries: Powered by Outlet Source Standard: CAT II 120V Safety Rating Included: Instructions Weight: 2.35 oz (67 g) Document Brochure

Description Klein Tools MM325 Multimeter is a manual-ranging multimeter that measures AC/DC voltage, DC current, and resistance. It can also test batteries, diodes, and continuity. Klein Tools’ Test and Measurement product line was exclusively designed from the ground up by electricians for electricians. Years of field research, combined with extensive input from electricians across America, inspired the development of meters and electrical testers loaded with innovative, time-saving features. Features Multimeter measures up to 600V AC/DC voltage, 10A DC current, 2 MOhms resistance, continuity, batteries, and diodes Lead Alert protection with LED's for test lead placement Easy-to-view backlit display for low light environments Low battery indicator and easily accessible battery and fuse compartment Durable meter built to withstand a 6.6-Foot (2 m) drop Includes test leads, batteries and user manual CAT III 600V safety rating For use in basic and controlled electromagnetic environments such as residential, business and light-industrial locations Technical Information Type: Digital Multimeter Application: Testing and Measuring Voltage Special Features: Lead Alert; Backlight; Auto Power-Off; Data Hold Material: ABS and Electrical Components Batteries: 2 x AAA Drop Protection: 6.6' (2 m) Display: 2000 Count LCD Color: Orange/ Black Functions: Measures up to 600V AC/DC Voltage, 10A DC Current and 2MΩ Resistance; Tests Batteries, Diodes and Continuity Voltage: 600V AC/DC Current: 10A DC Ohms (Resistance): 2MΩ Standard: CAT III 600V; CE and UKCA Certified Included: Test Leads, Batteries, and User Manual Overall Length: 6.41'' (16.2 cm) Overall Height: 1.83'' (4.6 cm) Overall Width: 3.13'' (7.9 cm) Weight: 8.8 oz (250 g) Document Multimeter Selection Guide Instruction Manual

Description Klein Tools CL390 is an automatically ranging true root mean squared (TRMS) digital clamp meter. It measures AC/DC current and NCVT via the clamp, AC/DC voltage, DC microamps, resistance, continuity, frequency, capacitance, and diodes via test leads, and temperature via a thermocouple probe. It features a high visibility, reverse contrast LCD display that optimizes view ability both in dark or bright ambient lighting. Features Test lead holder on side of clamp and optional magnetic hanger for meter (Cat. Nos. 69445 or 69417) for hands free operation Non-contact voltage tester integrated into the clamp jaw High-visibility reverse contrast LCD display for improved view ability in all ambient lighting conditions Automatically ranging True Root Mean Squared (TRMS) measurement technology for accuracy Measures AC/DC current and NCVT via clamp and AC/DC voltage, resistance, frequency, DC microamps, capacitance, duty cycle, diode test, and continuity via test-leads, and temperature with thermocouple Measures temperature with a K-Type thermocouple probe Max/Min, Rel/Zero and Data Hold capability Auto-power off after 10 minutes to conserve battery life Includes a carrying case, test leads with CAT III/CAT IV safety caps, thermocouple, instructions, and 3 x AAA batteries Low battery indicator and easily accessible battery compartment Built to withstand a 6.6-Foot (2 m) drop CAT III 600V, Class 2, Double insulation safety rating Meets requirements for use in basic and controlled electromagnetic environments like residential, office and light-industrial locations Technical Information Type: AC/DC Current TRMS Clamp Application: Measures both AC/DC current and NCVT via the clamp and AC/DC voltage, DC microamp current, resistance, continuity, frequency, duty-cycle, capacitance and tests diodes via the test leads, and temperature with thermocouple Special Features: Automatically Ranging True Root Mean Squared (TRMS) Measurement Technology for Accuracy; AC/DC Current Measurement; High Visibility Reverse Contrast LCD; NCVT Material: ABS/Electronics Batteries: 3 x AAA Auto-Power Off: Yes Jaw Size: 1.6'' (4.1 cm) Drop Protection: 6.6' (2 m) Display: 4000 Count Reverse Contrast LCD Functions: TRMS, AC/DC Current, NCVT, AC/DC Voltage, Resistance, DC microamp, Frequency, Capacitance, Continuity, Duty Cycle, Diode Test, and Temperature Voltage: 600 V AC/DC Frequency: 10 Hz to 60 kHz for 8 V to 220 V AC RMS Current: 400 A AC/DC Capacitance: 4000 µF Ohms (Resistance): 40 MΩ AC Voltage: 600 V DC Voltage: 600 V DC Polarity Indicator: Yes DC Micro-Amp: 200 µA Temperature Range: -40° - 1832°F (-40° - 1000°C) Standard: CATIII 600V, Class 2, Double Insulation Safety Rating, CE Certified Included: Clamp Meter; Carrying Case; Instructions; Test Leads; Thermocouple; Batteries Overall Length: 8.45'' (21.5 cm) Overall Height: 1.5'' (3.8 cm) Overall Width: 3.5'' (8.9 cm) Weight: 11 oz (314 g) Document Brochure Instruction Clamp Meter Selection Guide

Description The Fluke 902 FC Clamp Meter, with Fluke Connect wireless connectivity, can help HVAC technicians improve productivity in the field. The rugged dual-rated CAT III 600 V, CAT IV 300 V meter equips you to perform many essential HVAC system measurements: microamps for testing pilot light sensors; resistance up to 60 kΩ; AC current and AC/DC voltage; capacitance; and contact temperature, all with just one tool. Plus its small form factor makes it easy to hang on to and navigate in tight work spaces. As part of the Fluke Connect family, the 902 FC can transmit measurements to a smartphone or tablet for later, detailed analysis. No need to write down the results. Trend and monitor measurements live on your phone screen, and upload those measurements to the cloud. Combine measurement data from multiple Fluke Connect test tools to create and share reports from the job site via email, and collaborate in real time with other colleagues with ShareLive™ video calls or email. The 902 FC can also decrease the frequency of wearing personal protective equipment (PPE) when working on high voltage/current panels. Simply turn off the panel. Verify that it is de-energized using standard safety procedures. Place the clamp and synch it to a smartphone. Close the panel, reenergize it, and take measurements from a safe distance. What's in the box: 902 FC Clamp Meter (1 pair) TL75 test leads 80BK integrated DMM temperature probe 2 AA Alkaline Batteries (Installed) Soft carrying case Quick Reference Guide Features A wireless Fluke Connect®-enabled clamp meter designed specifically for the needs of HVAC technicians Offers 200 µA DC current measurements to measure flame rod Extends resistance range to measure thermistors up to 60kΩ Captures flue gas temperature Measures start and run motor capacitors Measures variable frequency drive performance Ergonomic design fits in your hand and can be used while wearing personal protective equipment Large, easy-to-read backlit display improves readings in low light settings Connects to your smartphone via Fluke Connect so you can read measurements at a safer distance Measures AC current to 600 A and AC and DC voltage to 600 V Measures capacitance to 1000 µF and DC current to 200 µA Measures temperature from -10 °C to 400 °C (14 °F to 752 °F) Offers True-RMS voltage and current measurements to accurately measure non-linear signals Measures resistance to 60 kΩ Offers Min/Max recording to capture variations automatically Runs on two AA alkaline batteries Technical Information Function A ac (via Jaw) Resolution 0.1 A Accuracy 2.0% ±5 digit (45-65 Hz) 2.5% ±5 digit (65-400 Hz) Range 600.0 A Crest Factor (50Hz or 60Hz) 2.5 MIN@220 A > 1.4 MIN@600 A Add 2% for CF>400 A V ac Resolution 0.1 V Accuracy 1.5% ±5 digits Range 600.0 V V dc Resolution 0.1 V Accuracy 1.5% ±5 digits Range 600.0 V Ohms Resolution 0.1/1/10 Accuracy 1% ±5 digits Range 600/6000/60.00 kΩ Capacitance Resolution 0.1/1 µF Accuracy 1% ±4 digits Range 100.0/1000 µF µA Resolution 0.1 µA Accuracy 1% ±5 digits Range 200 µA Contact temperature Resolution 0.1 C/F Accuracy 1% ±8 digits Range -40 to 400 °C (-40 °F to 752 °F) Continuity beeper Beeper volume 75 dBA nom. 15 cm. from case front On threshold <=30 Ω Mechanical and General Specifications Maximum voltage between any terminal and earth ground 1000 V Battery type 2 AA alkaline batteries, NEDA 15A, IEC LR6 Temperature Operating: -10 °C to +50 °C (14 °F to +122 °F) Storage: -40 °C to +60 °C (-40 °F to +140 °F) Operating humidity Non condensing (< 10 °C [50 °F]), ≤90 % RH (at 10 °C to 30 °C [50 °F to 86 °F]), ≤75 % RH (at 30 °C to 40 °C (86 °F to 104 °F)), ≤45 % RH (at 40 °C to 50 °C (104 °F to 122 °F)) Altitude Operating: 3,000 m (9,842 ft) Storage: 12,000 m (39,370 ft) Dimensions 230 x 83.7 x 45.4mm (9.06 x 3.30 x 1.39 in) Weight (meter only) 419 g (15 oz) Safety IEC 61010-1, Pollution Degree 2 IEC 61010-2-032: CAT III 1000 V / CAT IV 600 V IEC 61010-2-033: CAT III 1000 V / CAT IV 600 V IP Rating IEC 60529: IP30, non-operating Radio Frequency Certification FCC ID:T68-FBLE IC:6627A-FBLE Electromagnetic Compatibility (EMC) International: IEC 61326-1: Portable, Electromagnetic Environment, IEC 61326-2-2 CISPR 11: Group 1, Class A Korea (KCC): Class A Equipment (Industrial Broadcasting & Communication Equipment) USA (FCC): 47 CFR 15 subpart B. This product is considered an exempt device per clause 15.103. Temperature coefficients Add 0.1 × specified accuracy for each degree C above 28 °C or below 18 °C Document User's Manual

Description The Ferret Wristband by Ferret Tools is a universal phone holder that will securely attach any smart phone from 3.5″ up to 6″ to your wrist. With a 360 degree rotatable front section the phone can easily be turned to the perfect angle needed for any situation. Features Universal Phone Holder Wide compatibility – fits 3.5″ – 6″ smartphones and devices Made of High-Quality Material – highly breathable, ultra-light and comfortable to wear 360 degree Rotatable design – provides the perfect angle Hands free – never worry about holding or dropping your phone again Strong silicon material holds your phone securely Documents Brochure

Description The Greenlee CS-8000 Circuit Seeker Circuit Tracer is the ideal product for tracing concealed wiring, locating junction boxes, and finding breakers for live or open circuits. This circuit seeker can also locate and identify blown fuses, as well as find breaks and shorts in conductors. Benefits Advanced patented non-directional sensing technology. Superior sensitivity and functionality providing for accurate tracing and locating. Ergonomic receiver with information-rich full-color graphical LCD. Graphics and audible signal provide quick and easy to understand tracing feedback. Traces concealed wiring, locates junction boxes, and finds breakers for live or open circuits. Locates and identifies blown fuses. Finds shorts and breaks in conductors. Low pitch, high volume audible indicator. User-selectable automatic or manual gain capability for fast, convenient use. Power saving features promote extended battery life (Auto Power Off). Can be used on GFCI protected circuits. Supports transmitter-to-receiver distances up to 4 miles for closed circuit tracing. Does not affect sensitive electronic equipment on the circuit. Auto backlight on receiver maximizes battery life. Lifetime Limited Warranty. Technical Information Brand: Greenlee Weight: 4.300 LB (1950.000 G) Temperature Range: 0 - 50°C (32° - 122°F) Altitude: 2000 m (6500') maximum Pollution Degree: 2, Indoor Use Only Capacity: 0 - 750V AC/DC Frequency: 15.15 kHz Receiver Range: Up To 20.000 FT (6.000 M) Live Line Mode Up To 10.000 IN (3.000 M) Open Line With Metallic Connection To Ground 1.000 - 3.000 FT (0.300 - 0.900 M) With Capacitive Ground Reference Documents Instruction Manual Brochure

Description Scout® Pro Max tests and troubleshoots RJ11, RJ12, RJ45, and F-connector terminated cables and provides analog and digital tone generation for cable tracing. It measures cable lengths (via TDR) and detects distance to faults. Generate reports to show custom test history. Tests shielded and unshielded cables. Trace up to 20 locations at a time with included remotes. Perform hub blink testing, measure active and passive Power over Ethernet (PoE). Test POTS, and detect active network capabilities. Features Network cable tester locates, tests, and measures data, phone, and coax cables to ensure fast and accurate installations and troubleshoot faults Full color back-lit screen and internal memory to store, download, and output test results for easy report management Measure cable length up to 2000 feet (610 m) and distance to fault with TDR Digital / Analog tone generation to easily probe cables (requires Cat. No. VDV500-223, sold separately) Locate and identify up to 20 locations with ID remotes for greater cable management and organization Detect network capabilities and connection speeds up to 10G bps Initiate hub blink to easily identify and locate cables on device and POTS testing Technical Information Type: Twisted Pair, DATA, Voice, LAN, and Coaxial Application: Cable Testing Special Features: Measures Cable Length; Backlit LCD; Hub Blink Overall Length: 8'' (20.3 cm) Overall Height: 1.5'' (3.8 cm) Overall Width: 4'' (10.2 cm) Material: Plastic and Metal Batteries: 3× AA alkaline Battery Life: Active: 15 hr; Standby: 1 yr Drop Protection: 6.6' (2 m) Supported Remotes: 41 Connection & Adapter Types: RJ11, RJ12, RJ45, Coax F Display: Backlit LCD Multiple Style Tone Generator: Yes (5); Requires Tracing Probe (Cat. No. VDV500-223); Sold Separately Cable Type: DATA:, Shielded or Unshielded, CAT6; COAXIAL: RJ11, RJ12, RJ45 Cable Identification: Includes 20 Remote Locators Test & Measure Types: Ethernet/Data and Coaxial Accuracy: ± (2% + 3' or 1 m) with Known VoP and Consistent Cable Parameters Included: Tester, Self-Storing Remote, RJ45 CAT6 to RJ45 CAT6 Cable (T658B) (×2), RJ11 to RJ11 Cable (×2), RJ12 to RJ12 Cable (×2), Female Coax-F to Angled-Bed-of-Nails Cable, RJ45 LanMap™ Location ID Remotes (1-20), F-Connector CoaxMap™ Location ID Remotes (120), Female F-Barrel Connector, USB-C to USB-A Cable, Carrying Case Weight: 15.8 oz (447 g) UPC: 092644583957 Document Sell Sheet Instructions Safety Data Sheet

Description The CL220VP Premium Meter Electrical Test Kit from Klein Tools is designed with optimum reliability and safety in mind. Kit comes with 1 clamp meter and 3 testers for a variety of applications and all stored within a convenient padded pouch. The CL220 is an auto-ranging 400 Amp clamp meter that measures AC current, AC/DC voltage, and temperature. The NCVT3P is a dual range non-contact tester with an integrated flashlight for a broad variety of voltage applications from 12 to 1000V AC or 70 to 1000V AC. Test AC and DC voltage at four commonly used ranges with the ET40 Voltage Tester. The RT210 Receptacle Tester detects common wiring problems for Standard and GFCI AC electrical outlets. Features CL220 Clamp Meter measures AC current and AC/DC voltage, resistance, and continuity via test leads, and temperature with thermocouple Auto-ranging TRMS meter has a backlit LCD on clamp to provide better viewing in low light and is CAT III 600V, Class 2 Double Insulated NCVT3P has dual-range capabilities to detect from 12 to 1000V AC or 70 to 1000V AC for a broad variety of low-voltage or standard voltage applications Bright flashlight illuminates work area and may be used independent of NCVT-3P voltage detection function ET40 tests AC voltages from 12V to 240V and DC voltages from 1.5V to >17V to 24V at four useful levels aligned with commonly used residential voltages ET40 also has built-in test lead holders spaced for testing tamper-resistant US-style outlets and convenient for storage RT210 detects common wiring problems in standard and GFCI receptacles: open ground, reverse polarity, open hot, open neutral, and hot/ground reversed Technical Information Type: Electrical Test Kit Application: Testing and Measuring AC/DC Voltage, Resistance, Continuity, Temperature, Non-contact Voltage Detection, and Determining Wiring Conditions in Outlets Special Features: CL220: Automatically Ranging True Root Mean Squared (TRMS) Measurement Technology for Accuracy; NCVT; Added Temperature Overall Length: 8.45'' (21.5 cm) Overall Height: 1.5'' (3.8 cm) Overall Width: 3.5'' (8.9 cm) Material: ABS/Electronics Batteries: CL220: 3 x AAA; NCVT3P: 2 x AAA; ET40: 2 x AAA Jaw Size: CL220: 1.6'' (4.1 cm) Drop Protection: 6.6' (2 m) Display: CL220: 2000 Count Backlit LCD Functions: Clamp Meter: TRMS, AC Current, NCVT, AC/DC Voltage, Resistance, Continuity and Temperature Voltage: CL220: 600 V AC/DC; NCVT3P: Range 1: 12 -1000V AC; Range 2: 70 - 1000V AC; ET40: AC Level Indicators: 12V, 24V, 120V, 240V and DC Indicators: 1.5V, 9V, 12V, >17-24V; RT310: 120V AC in 3-Wire Grounded Electrical Outlet Pollution Degree: CL220: 2 Standard: CL220: CATIII 600V, Class 2, Double Insulation Safety Rating, CE and UKCA Certified Included: CL220 Digital Clamp Meter with Test Leads; NCVT3P Dual Range Non-Contact Voltage Tester with Flashlight; ET40 Electronic AC/DC Voltage Tester; RT210 GFCI Receptacle Tester; Carrying Case; Instructions; and All Required Batteries Weight: 11 oz (314 g) Document CL220 Manual NCVT-3P Manual ET40 & RT210 Manual

Description The IDEAL 61-637 is CAT IV 600 V AC, UL Listed, Single Range Non-Contact Voltage Tester that automatically detects and indicates the presence of voltage within range of range of 24 - 600V AC . The tester provides non-contact detection of voltage through an antenna enclosed in plastic at the tip of the tester which senses the presence of the electromagnetic field present around live conductors. The tip is illuminated by a green LED when powered on and switches to a red flashing LED, and audible beep that increase in frequency as the voltage level increases. The tester is powered by two 1.5V AAA batteries and features an in tip LED flash light, an audible disable function, a lanyard tie-off point, an auto power off function and a low battery indication. Features UL Certified CAT IV 600V AC, 24 to 600 V AC An LED Flashlight in the tip operates independently of the tester functions and can be used to illuminate the work area. Press the Flashlight Button to turn it On/Off. The tester is set to Flashlight Off. The Flashlight will Auto Power Off after 5 minutes. Audible Notification Disable - The tester can be operated with a visual only indication of voltage when working in noise sensitive/noise restricted area with the simple press of a speaker button. Auto Power Off - After 10 minutes of inactivity (no button pressed and no signals detected), the tester will emit one long beep (~0.5s) and then shut off. Note: if the flashlight is on, it will be also shut off. Low Battery Indication - If battery voltage is less than around 2.4V, the green led in the tip will flash 3 times and the buzzer will send out one long beep, then turn off the device. Technical Information CAT Rating (Safety): CAT IV 600V Listing: cULus CE RCM Voltage Sensing Range: 24 - 600V AC Dual Range: YNo Flashlight: Yes Drop Protection: 3.3 ft. (1m) Dual Range Sensitivity: No Audible Indication: Yes Audible Defeat: Yes Visual Indication: Green On - Flashing Red Lanyard Compatible: Yes Auto-Power Off (APO): Yes Low Battery Indication: Yes Battery Type: 2x 1.5V AAA (included) Warranty: 2-Year Document Instruction Spec sheet Warranty