Square D Spd T2 Hepd 50Ka 120/240V1P3W

Description

HEPD whole house devices are designed to deliver AC surge protection for the entire AC power system in a home. HEPDs are compact in size and are designed to protect AC wires in the home from surges that could affect home electronics and appliances not connected to surge strips. For use on 120/240 VAC single phase, 3 wire systems with an isolated ground. This device provides 25 kA of short circuit protection and 50 kA of surge protection per phase. The surge protection device is in a NEMA 4X housing. The surge protection device is 3.23 inches tall, 3.72 inches wide and 2.10 inches deep. The surge protection device is UL listed.

Features

Surge protection device, HEPD, 50kA, 120/240 V, 1 phase, 3 wire, SPD type 1 Bending radius for side and bottom access to the transformer Product characteristics conformity is certified by UL

Technical Information

Rated Current: 10 kA Maximum Continuous Operating Voltage: 150 V Rated Operational Voltage: 120/240 V AC Ambient Air Temperature for Operation: -35-65 °C Length: 2.10 in Device_short_name: HEPD Height: 3.23 in Input_voltage: 1000 V L - L|600 V L - G|600 V L-N|900 V N - G Local_signalling: 1 LED green normal operation NEMA_Degree_of_Protection: NEMA 4X Network_number_of_phases: 1 phase Nominal_discharge_current: 10 kA Product_destination: load center Product_or_Component_Type: surge protection device Range_of_Product: Square D Short_circuit_protection: 25 kA|25 kA Surge_current: 50 kA per phase WEEE_Label: The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins Width: 3.72 in Wiring_configuration: 3-wire (isolated ground)