Power Tool Accessories

Description Made in the USA, the Milwaukee® HOLE DOZER™ Hole Saw features Rip Guard™, the strongest tooth form in the industry, backed by the Rip Guard™ Limited Lifetime Tooth Break Warranty. Each tooth is built with more steel behind the cutting edge for added strength. The Rip Guard™ warranty on tooth breaks is a first for the hole saw industry. The added tooth strength along with 8% cobalt give added life to the teeth, allowing for increased productivity on the jobsite, as well as continued hole quality. The HOLE DOZER™ includes Plug Jack™, an all access slot design that allows for full access during plug removal. The Plug Jack™ gives access lower into the cup for thick material and higher towards the teeth for thin material. With multiple positions to apply leverage and better plug access, Plug Jack™ increases productivity and eliminates wasted downtime between holes. For fast, tool-free change-outs, use Milwaukee's universal Quick-Change Arbor. 49-56-7240, 49-56-7250, and 49-56-9100. Benefits RIP GUARD™ Limited Lifetime Tooth Break Warranty Thermoset Coating, Delivers Up to 2X Faster Cuts in Wood PLUG JACK™, an all access slot design for fast plug removal Bi-Metal construction with 8% cobalt for increased wear resistance Technical Information Size: 1'' Thread: 1/2"-20 Depth of Cut: 1-5/8"

Description Quick Change Carbide Tipped Hole Cutter 2-3/8" (60.3 mm). Cuts stainless steel quickly and easily. Quick Change arbor allows you to change cutter heads with a simple push and a turn. Use the same arbor for different size cutting heads. Removable cutter heads available in sizes from 5/8" through 3". Flange stop prevents over-drilling. Ejector spring on all sizes above 3/4" makes removal of slug easier. Replaceable, cobalt-steel pilot drill with split-point tip to prevent walking. Precision carbide teeth for optimum performance and durability. ** 645-022 arbor sold separately Features Switch quickly between cutter sizes without re-chucking, with a simple push and turn connection Split-Point Cobalt Steel Pilot Drill with step design – for fast, accurate metal cutting with less force Tungsten Carbide Teeth – optimized design for fast, easy cutting and maximum life in stainless steel – no oil required Flange Stop – eliminates over-drilling Slug Ejector Spring – quick, easy slug removal This metal cutter tool produces round, burr-free holes Technical Information Application: Stainless steel, mild steel, aluminum, copper, brass, fiberglass and plastics Type: Carbide-Tipped Hole Cutter Hole Size: 2-3/8" (60.3 mm) Shank Size: 645-022 arbor sold separately (1/2" shank) Maximum Cutting Size: 8 ga Cutting Edge: Tungsten Carbide Teeth Pilot Drill Replacement: 645-002 sold separately Pilot Drill Size: 5/16" x 2-3/4" (8 mm x 69 mm) Document Brochure Instruction

Description Quick Change Carbide Tipped Hole Cutter 3" (76.2 mm). Cuts stainless steel quickly and easily. Quick Change arbor allows you to change cutter heads with a simple push and a turn. Use the same arbor for different size cutting heads. Removable cutter heads available in sizes from 5/8" through 3". Flange stop prevents over-drilling. Ejector spring on all sizes above 3/4" makes removal of slug easier. Replaceable, cobalt-steel pilot drill with split-point tip to prevent walking. Precision carbide teeth for optimum performance and durability. ** 645-022 arbor sold separately Features Switch quickly between cutter sizes without re-chucking, with a simple push and turn connection Split-Point Cobalt Steel Pilot Drill with step design – for fast, accurate metal cutting with less force Tungsten Carbide Teeth – optimized design for fast, easy cutting and maximum life in stainless steel – no oil required Flange Stop – eliminates over-drilling Slug Ejector Spring – quick, easy slug removal This metal cutter tool produces round, burr-free holes Technical Information Application: Stainless steel, mild steel, aluminum, copper, brass, fiberglass and plastics Type: Carbide-Tipped Hole Cutter Hole Size: 3" (76.2 mm) for 2-1/2" conduit Shank Size: 645-022 arbor sold separately (1/2" shank) Maximum Cutting Size: 8 ga Cutting Edge: Tungsten Carbide Teeth Pilot Drill Replacement: 645-002 sold separately Pilot Drill Size: 5/16" x 2-3/4" (8 mm x 69 mm) Document Brochure Instruction

Description Quick Change Carbide Tipped Hole Cutter 2-1/8" (54.0 mm) Cuts stainless steel quickly and easily. Quick Change arbor allows you to change cutter heads with a simple push and a turn. Use the same arbor for different size cutting heads. Removable cutter heads available in sizes from 5/8" through 3". Flange stop prevents over-drilling. Ejector spring on all sizes above 3/4" makes removal of slug easier. Replaceable, cobalt-steel pilot drill with split-point tip to prevent walking. Precision carbide teeth for optimum performance and durability. ** 645-022 arbor sold separately Features Switch quickly between cutter sizes without re-chucking, with a simple push and turn connection Split-Point Cobalt Steel Pilot Drill with step design – for fast, accurate metal cutting with less force Tungsten Carbide Teeth – optimized design for fast, easy cutting and maximum life in stainless steel – no oil required Flange Stop – eliminates over-drilling Slug Ejector Spring – quick, easy slug removal This metal cutter tool produces round, burr-free holes Technical Information Application: Stainless steel, mild steel, aluminum, copper, brass, fiberglass and plastics Type: Carbide-Tipped Hole Cutter Hole Size: 2-1/8" (54.0 mm) Shank Size: 645-011 arbor sold separately (3/8" shank) Maximum Cutting Size: 8 ga Cutting Edge: Tungsten Carbide Teeth Pilot Drill Replacement: 645-001 sold separately Pilot Drill Size: 1/4" x 2-1/2" (6 mm x 64 mm) Document Brochure Instruction

Description Quick Change Carbide Tipped Hole Cutter 1-3/4" (44.45 mm) Cuts stainless steel quickly and easily. Quick Change arbor allows you to change cutter heads with a simple push and a turn. Use the same arbor for different size cutting heads. Removable cutter heads available in sizes from 5/8" through 3". Flange stop prevents over-drilling. Ejector spring on all sizes above 3/4" makes removal of slug easier. Replaceable, cobalt-steel pilot drill with split-point tip to prevent walking. Precision carbide teeth for optimum performance and durability. Minimum chuck size of 3/8". ** 645-011 arbor sold separately Features Switch quickly between cutter sizes without re-chucking, with a simple push and turn connection Split-Point Cobalt Steel Pilot Drill with step design – for fast, accurate metal cutting with less force Tungsten Carbide Teeth – optimized design for fast, easy cutting and maximum life in stainless steel – no oil required Flange Stop – eliminates over-drilling Slug Ejector Spring – quick, easy slug removal This metal cutter tool produces round, burr-free holes Technical Information Application: Stainless steel, mild steel, aluminum, copper, brass, fiberglass and plastics Type: Carbide-Tipped Hole Cutter Hole Size: 1-3/4" (44.45 mm) Shank Size: 645-011 arbor sold separately (3/8" shank) Maximum Cutting Size: 8 ga Cutting Edge: Tungsten Carbide Teeth Pilot Drill Replacement: 645-001 sold separately Pilot Drill Size: 1/4" x 2-1/2" (6 mm x 64 mm) Document Brochure Instruction

Description Greenlee Tools' Quick change arbor allows you to change metal cutter heads with a simple push and a turn. You can use the same arbor for different size metal cutting heads. The small arbor is good from size 2-3/8" to 3" Technical Information Arbor Size: 2-3/8 - 3.000 IN Material: Carbide Cutter Shank Shank Diameter: 1/2 IN Type: Quick Change Document Brochure Instruction

Description Milwaukee's Socket Adapters with FOUR FLAT™ Sides are designed from the ground up to be part of the most versatile socket family. Milwaukee™ adapters feature an innovative design with four parallel flat sides, which deter rolling and are wrench-compatible. The drive sizes are laser etched onto the adapter providing you with improved, easy-to-read visibility. Chrome plating offers corrosion and rust protection. All Milwaukee Mechanics Hand Tools are backed by a lifetime guarantee. Features FOUR FLAT™ Sides deter rolling FOUR FLAT™ Sides feature wrench-ready design Secure Socket Retention Easy to Read Size Identification Decrease Drive Size From 3/8" to 1/4" Corrosion Resistant Chrome Plated Rust Protection Lifetime Guarantee Technical Information Magnetic: No Socket Type: Square Length: 0.56 in Weight: 0.04 lb Height: 1 in Width: 0.56 in Output Drive Size: 1/4" Input Drive Size: 3/8" Material Composition: Chrome Vanadium Steel Drive Size: 3/8 in

Description The Replacement Blades and Bit for the Adjustable Hole Saw with Auto-Set Arms (Cat. No. 53710) come with all the necessary components, including 2 Blades, 1 pilot bit, 2 hex keys, 4 washers, 2 end screws, and 1 set screw. These replacements allow for smooth cuts ranging from 2 to 7-Inch (5.1 to 17.8 cm) in drywall and ceiling tile. The integrated gearing mechanism of the Adjustable Hole Saw with Auto-Set Arms ensures easy adjustment in 1/4-Inch (0.6 cm) increments and keeps the pilot bit consistently centered for precise cutting. Features Replacement blades and bit for the Adjustable Hole Saw with Auto-Set Arms (Cat. No. 53710) The Adjustable Hole Saw with Auto-Set Arms provides smooth cuts from 2 to 7-Inches (5.1 to 17.8 cm) in drywall and ceiling tile Features integrated gears for easy blade adjustment and centered pilot bit Replacement kit comes with 2 blades, 1 pilot bit, 2 hex keys, 4 washers, 2 end screws and 1 set screw Using the large hex key, remove and replace end screw, washers, and blade Using the small hex key, remove and replace pilot bit set screw and pilot bit After replacing, ensure all screws are fully seated and snug-tight before using the Adjustable Hole Saw with Auto-Set Arms to cut drywall or ceiling tile Technical Information Type: Replacement Parts Application: Replacement Blades, Pilot Bit, Hex Keys, and Hardware Special Features: Integrated Gears Overall Length: 1'' (2.5 cm) Overall Height: 2.52'' (6.4 cm) Overall Width: 0.19'' (0.5 cm) Material: Steel Size: 3/16'' Tip Type: Regular-Point Shaft Length: 1.56'' (4 cm) For Use With: 53710 Adjustable Hole Saw with Auto-Set Arms Includes: (2) Blades, (1) Pilot Bit, (2) Hex Keys, ( 4) Washers, (2) End Screws, (1) Set Screw Weight: 1.1 oz (31.2 g) Document Brochure

Description The dual spiral flutes on Klein Step Drill Bits help pull the step bit through the material for faster cutting. The aluminum titanium coating is 10 times more durable than steamed black oxide for longer bit life. Impact rated, the 1/4-Inch hex shank provides a firm, positive grip and allows quick and convenient usage with an impact driver and a drill. Three hole sizes with laser marking for easy identification. Features Step bits are coated with aluminum titanium nitride and are 10 times more durable than steamed black oxide coating for longer bit life Impact rated shaft allows for use with impact drivers and standard drills Double spiral flute removes chips for faster cuts and drilling Laser markings are easy to read for quick size identification of 12 hole sizes Fast-starting, non-walking drill tip Quick-release, 1/4-Inch hex shank provides a firm, positive grip and won't spin out in the drill For use on steel (up to 16 gauge), wood, plastic, and aluminum Technical Information Type: Step Drill Bit Application: Multi-Material Drilling Special Features: Aluminum Titanium Coating; Impact Shaft; Dual Spiral Fluting Shank Type: 1/4'' Hex Flute Type: Spiral Overall Length: 0.88" (2.2 cm) Overall Height: 3.2" (8.1 cm) Overall Width: 0.88" (2.2 cm) Material: High Speed Steel Coating: Aluminum Titanium Number of Holes: 12 Size: 3/16" to 7/8" (4.8 mm to 22.2 mm) Weight: 2.24 oz (64 g) Document Brochure

Description The dual spiral flutes on Klein Step Drill Bits help pull the step bit through the material for faster cutting. The aluminum titanium coating is 10 times more durable than steamed black oxide for longer bit life. Impact rated, the 1/4-Inch hex shank provides a firm, positive grip and allows quick and convenient usage with an impact driver and a drill. Three hole sizes with laser marking for easy identification. Features Step bits are coated with aluminum titanium nitride and are 10 times more durable than steamed black oxide coating for longer bit life Impact rated shaft allows for use with impact drivers and standard drills Double spiral flute removes chips for faster cuts and drilling Laser markings are easy to read for quick size identification of 13 hole sizes Fast-starting, non-walking drill tip Quick-release, 1/4-Inch hex shank provides a firm, positive grip and won't spin out in the drill For use on steel (up to 16 gauge), wood, plastic, and aluminum Technical Information Type: Step Drill Bit Application: Multi-Material Drilling Special Features: Aluminum Titanium Coating; Impact Shaft; Dual Spiral Fluting Shank Type: 1/4'' Hex Flute Type: Spiral Overall Length: 0.5'' (1.3 cm) Overall Height: 3.4'' (8.6 cm) Overall Width: 0.5'' (1.3 cm) Material: High Speed Steel Coating: Aluminum Titanium Number of Holes: 13 Increment: 1/32'' (0.8 mm) Size: 1/8'' to 1/2'' (3.2 mm to 12.7 mm) Weight: 1.1 oz (31 g) Document Brochure

Description Combination Drill/Tap Bits. 10-32NF. Complete hole drilling, tapping and deburring/countersinking in one operation with power drill saves labor and time. Back tapered beyond tap to prevent thread damage from over-drilling. Deburr/countersink also provided on bit beyond back taper. Made from hardened high-speed steel vs. carbon steel for longer life. High quality hex shank to ensure strong connection to drill chuck. Designed to tap up to 10-gauge metal. Quick change adaptor included in both metric and standard kits. Features Complete hole drilling, tapping and deburring/countersinking in one operation with power drill saves labor and time Back tapered beyond tap to prevent thread damage from over-drilling Deburr/countersink also provided on bit beyond back taper Made from hardened high-speed steel vs. carbon steel for longer life High quality hex shank to ensure strong connection to drill chuck Designed to tap up to 10-gauge metal Quick change adaptor included in both metric and standard kits Technical Information Material: High Speed Steel Material thickness: Up to 10 GA Material type: Mild Steel, Copper, Brass, Aluminum Point Type: Split Point With Web Thinning Shank: 1/4 IN Quick Change Hex Size: #10 Thread Per Inch: 32 TPI Thread Type: NF Document Brochure

Description The Electrician's Step Bit Kit features three commonly used step bits, with dual spiral fluting to help pull the step bit through material for faster cutting. Titanium Nitride coating extends the life of the cutting edge. Convenient to use with an impact driver and drill, the 1/4-Inch hex shank provides a firm, positive grip. Kit comes in a rugged case that includes a convenient oil bottle for bit lubrication and longevity. Features Electrician's Step Bit Kit with 3 step bits sized 7/8, 1-1/8, and 1-3/8-Inch for creating hole cutouts in panels and j-boxes to accommodate most commonly used 1/2, 3/4, and 1-Inch conduit Two spiral flutes on each step drill bit remove chips and help pull the bit through material for faster cutting Titanium nitride coating dissipates heat for longer bit life 1/4-Inch hex shank for firm, positive grip in impact driver and standard drill Split point tip quickly starts hole cuts and prevents drifting when pressure is added Kit comes with a convenient 1-Ounce oil bottle for lubrication between cuts to prolong step bit life Rugged case snaps shut with custom inserts for each bit and oil bottle Total of 17 hole sizes Technical Information Type: Step Drill Bit Set Application: Multi-Material Drilling Special Features: TiN Coating, Impact Shaft, Dual Spiral Fluting, Oil Bottle, Custom Inserts in Protective Case Shank Type: 1/4'' Hex Flute Type: Spiral Overall Length: 8.75'' (22.2 cm) Overall Height: 4.9'' (12.3 cm) Overall Width: 2.75'' (7 cm) Material: High Speed Steel Quick Reference: #14, #11, #15 Number of Holes: 17 Total Size: 3/16'' to 7/8'' (4.8 to 22.2 mm); 7/8'' to 1-1/8'' (22.2 to 28.6 mm); 7/8'' to 1-3/8'' (22.2 to 34.9 mm) Weight: 26.1 oz (740 g) Document Brochure

Description Dual Spiral Flutes on VACO Step Drill Bits help pull the step bit through the material for faster cutting. The Titanium Nitride coating extends life of the cutting edge. Convenient to use with an impact driver and drill, the 1/4-Inch hex shank provides a firm, positive grip. Available in five step bit sizes with commonly used hole sizes for steel (up to 16 gauge), plastic, aluminum, and wood. Features Step Drill Bit has 2 spiral flutes to remove chips and help pull the bit through material for faster cutting Titanium nitride coating dissipates heat for longer bit life 1/4-Inch hex shank for firm, positive grip in impact driver and standard drill Split point tip quickly starts hole cuts and prevents drifting when pressure is added Laser-etched hole size markings for quick size identification For use on steel (up to 16 gauge), wood, plastic, and aluminum 9 hole sizes Technical Information Type: Step Drill Bit Application: Multi-Material Drilling Special Features: TiN Coating, Impact Shaft, Dual Spiral Fluting Shank Type: 1/4'' Hex Flute Type: Spiral Overall Length: 0.75'' (1.9 cm) Overall Height: 2.82'' (7.2 cm) Overall Width: 0.75'' (1.9 cm) Material: High Speed Steel Quick Reference: #3 Number of Holes: 9 Increment: 1/16'' (1.6 mm) Size: 1/4'' to 3/4'' (6.4 to 19.1 mm) Weight: 1.76 oz (50 g) Document Brochure

Description Dual Spiral Flutes on VACO Step Drill Bits help pull the step bit through material for faster cutting. The Titanium Nitride coating extends the life of the cutting edge. Convenient to use with an impact driver and drill, the 1/4-Inch hex shank provides a firm, positive grip. Available in five step bit sizes with commonly used hole sizes for steel (up to 16 gauge), plastic, aluminum, and wood. Features Step Drill Bit has 2 spiral flutes to remove chips and help pull the bit through material for faster cutting Titanium nitride coating dissipates heat for longer bit life 1/4-Inch hex shank for firm, positive grip in impact driver and standard drill Split point tip quickly starts hole cuts and prevents drifting when pressure is added Laser-etched hole size markings for quick size identification For use on steel (up to 16 gauge), wood, plastic, and aluminum 2 hole sizes Technical Information Type: Step Drill Bit Application: Multi-Material Drilling Special Features: TiN Coating, Impact Shaft, Dual Spiral Fluting Shank Type: 1/4'' Hex Flute Type: Spiral Overall Length: 1.13'' (2.9 cm) Overall Height: 3.22'' (8.2 cm) Overall Width: 1.13'' (2.9 cm) Material: High Speed Steel Quick Reference: #11 Number of Holes: 2 Size: 7/8'' to 1-1/8'' (22.2 to 28.6 mm) Weight: 3.68 oz (104 g) Document Brochure

Description Dual Spiral Flutes on VACO Step Drill Bits help pull the step bit through material for faster cutting. The Titanium Nitride coating extends the life of the cutting edge. Convenient to use with an impact driver and drill, the 1/4-Inch hex shank provides a firm, positive grip. Available in five step bit sizes with commonly used hole sizes for steel (up to 16 gauge), plastic, aluminum, and wood. Features Step Drill Bit has 2 spiral flutes to remove chips and help pull the bit through material for faster cutting Titanium nitride coating dissipates heat for longer bit life 1/4-Inch hex shank for firm, positive grip in impact driver and standard drill Split point tip quickly starts hole cuts and prevents drifting when pressure is added Laser-etched hole size markings for quick size identification For use on steel (up to 16 gauge), wood, plastic, and aluminum 3 hole sizes Technical Information Type: Step Drill Bit Application: Multi-Material Drilling Special Features: TiN Coating, Impact Shaft, Dual Spiral Fluting Shank Type: 1/4'' Hex Flute Type: Spiral Overall Length: 1.38'' (3.5 cm) Overall Height: 3.57'' (9.1 cm) Overall Width: 1.38'' (3.5 cm) Material: High Speed Steel Quick Reference: #15 Number of Holes: 3 Size: 7/8'' to 1-3/8'' (22.2 to 34.9 mm) Weight: 6.88 oz (195 g) Document Brochure

Description This hole cutter kit cuts quick, precise holes in a variety of materials. Includes six commonly used size plus two extra pilot bits. Integrated flange prevents the operator from drilling beyond the sheet metal. Split point pilot drill bit prevents bit walking. Features Heavy duty, durable carbide hole cutters for long life Cuts quick, precise holes in stainless steel, mild steel, iron, copper and brass sheet up to 3/16-Inch (0.5 cm) thick Set contains: 7/8-Inch, 1-1/8-Inch, 1-3/8-Inch, 1-3/4-Inch, 2-Inch, 2-1/2-Inch, two extra pilot bits Split point pilot drill bit prevents bit walking Integrated flange prevents the operator from drilling beyond the sheet metal Conduit and pipe sizes: 1/2-Inch (1.3 cm) to 2-Inch (5.1 cm) All components are packed in a rust-proof, molded plastic carrying case Technical Information Type: Bi Metal Application: Hole Making in Wood, Plastic, Mild and Stainless Steel Special Features: Optimized Teeth Pattern for Fast, Consistent Cutting of Steel Including Stainless Weight: 2.6 lb (1.2 kg)

Description Klein's Bi-Metal Hole Saws are optimized for cutting steel. The blades provide the fastest, most consistent and longest lasting cutting on the market today. Heavy-duty construction includes thicker 5 mil back plates to stand up to abuse much better. Features Optimized for cutting steel including stainless steel Cuts precise holes in drywall, ceiling tile steel, wood, plastic and stainless steel Long lasting, fast cutting blade Multiple leverage points for easy slug removal Heavy-duty steel construction includes a thick back plate to withstand abuse Hex-shaped base for easy removal from arbor Use with Klein Tools Arbor (Cat. No. 31906). Sold separately Technical Information Type: Heavy-Duty Application: Cuts Precise Holes in Steel, Drywall, Wood and Plastic Material: Steel Hole Diameter: 2-1/2 '' (6.4 cm) Pipe Entrance Size: 2'' (5.1 cm) For Use With: 31906 Document Brochure

Description The deep, open-throat design of the Ship Auger bit clears chips for faster, cleaner cuts. The shank is 7/16-Inch hex to fit 1/2-Inch (13 mm) and larger three-jaw chucks. Used for heavy construction and repair work in mines, on docks and bridges as well as electrical work. Features Bits drill through nails, wood, vinyl, plastics, and heavy timber Special bit steel with machine-ground flutes and polished edges for smooth, wobble-free boring Head and twist are ground to correct clearance for easy removal from hole Feed-screw pilot draws bit into wood Full length is heat-treated and tempered For heavy construction and repair work in mines, on docks and bridges as well as electrical work Technical Information Bit Diameter: 1-1/8'' (29 mm) Shank Diameter: 0.4'' Twist Length: 4'' (10.2 cm) Overall Length: 6'' (15.2 cm)

Description These Ideal Step bits have the new aggressive split-point tip that lasts longer and starts faster than competition. High speed tool steel - most durable steel available for cutting tools. They are double-tempered for superior tip life. Provides accurate drilling. Has a 1/4 IN Quick-change shank can be used in standard 3-jaw chuck, impact drivers and quick-change drill chucks. Comes with a durable blow-molded case securely holds and protects bits. This kit provides a solution for every electrical hole size between 1/8 IN and 1-1/8 IN Feature High speed tool steel, double-tempered for superior tip life Split point tip lasts longer and starts faster than competition Double fluted and blended radius steps for smooth drilling 1/4" Quick change shank Technical Information Step Bit Coating: Black Oxide Materials Cut: Aluminum Kit includes 1x 35-521 1/8" to 1/2" 1x 35-522 1/4" to 7/8" 1x 35-523 1/4" to 1-1/8" 1x Case

Description IDEAL Electrical’s line of TKO™ Carbide-Tipped Hole Cutters offer the most efficient and clean cutter replacement for traditional knockouts, by making smooth holes in a fraction of the time at a fraction of the cost. Specifically designed to cut sheet metal, IDEAL TKO™ cutters will even cut stainless steel with their precision engineered ground carbide tips. The innovative design includes the exclusive SmoothStart™ replaceable pilot drill, which guides the cutter to the surface, avoiding cutter damage and providing smoother holes. With an integral over-drill flange the IDEAL TKO™ prevents cutter penetration beyond the sheet metal. When it comes to quality, performance and durability, IDEAL is the professional’s choice for carbide-tipped hole cutters. Features Integrated arbor provides solid rotation SmoothStart ™ Pilot Drill prevents bit from “walking” on smooth surfaces Precision ground carbide teeth for fast cutting of clean, burr-free holes Designed specifically for sheet metal and stainless steel Built-in over drill flange prevents penetration beyond the sheet metal Technical Information Saw Diameter: 3/4" Cable Cutter Materials Cut: Aluminum Saw Blade Material: Carbide Tipped Document Catalogue

Description Tamper-Proof Torx ® Bits have a retaining ring notch made from rugged S2M tool steel to fit all standard multi-bit screwdrivers and power drills. Their 1/4-in. hexagonal body is custom heat-treated to offer strength and durability, and is manufactured to ensure accurate fit and full fastener engagement. Torx ® is a registered trademark of Acument Intellectual Properties, LLC. Tamper-Proof Torx T25 Insert Bit 1" Features Made from rugged S2M tool Steel 100% made in the U.S.A. Custom heat treated for strength and durability Manufactured to tight tolerances to ensure accurate fit Insert bits have a retaining ring notch Power bits have a power locking groove 1/4" hex body Fits all standard multi-bit screwdrivers and power drills Patented Combo Head ™ tip ensures full fastener engagement Document Catalogue page

Description Square #2, 2" Power Bit, Carded Features Made from rugged S2M tool Steel 100% made in the U.S.A. Custom heat treated for strength and durability Manufactured to tight tolerances to ensure accurate fit Insert bits have a retaining ring notch Power bits have a power locking groove 1/4" hex body Fits all standard multi-bit screwdrivers and power drills Patented Combo Head ™ tip ensures full fastener engagement Document Catalogue page

Description Slotted 3/16", 2" Power Bit, Carded Features Made from rugged S2M tool Steel 100% made in the U.S.A. Custom heat treated for strength and durability Manufactured to tight tolerances to ensure accurate fit Insert bits have a retaining ring notch Power bits have a power locking groove 1/4" hex body Fits all standard multi-bit screwdrivers and power drills Patented Combo Head ™ tip ensures full fastener engagement Document Catalogue page

Description Slotted 1/8", 2" Power Bit, Carded Features Made from rugged S2M tool Steel 100% made in the U.S.A. Custom heat treated for strength and durability Manufactured to tight tolerances to ensure accurate fit Insert bits have a retaining ring notch Power bits have a power locking groove 1/4" hex body Fits all standard multi-bit screwdrivers and power drills Patented Combo Head ™ tip ensures full fastener engagement Document Catalogue page

Description Ideal Philips #2, 2" Power Bit, Carded Features Made from rugged S2M tool Steel 100% made in the U.S.A. Custom heat treated for strength and durability Manufactured to tight tolerances to ensure accurate fit Insert bits have a retaining ring notch Power bits have a power locking groove 1/4" hex body Fits all standard multi-bit screwdrivers and power drills Patented Combo Head ™ tip ensures full fastener engagement Document Catalogue page

Description Features an innovative self-feeding design that is heat treated for prolonged life, along with requiring less effort and reduced vibration. Offers a unique design allowing for enlargement of existing holes, as well as a hole at the top center of the bit to pull wiring. Included in Kit 1/8", 3/16", 1/4" High Speed Titanium Coated Drill Bit Set MAS-SET (5/32", 3/16",1/4", 3/8") Masonry Drill Bit Set NDS-SET (1/4", 5/16", 3/8") Magnetic Nut Driver Set QCS-1 1/4" Quick Change Chuck EXT-3 Magnetic Bit Extension SBSET-1-14 (Spanner Security Bits - #6, #8, #10, #12, Torx Security Bits - T10, T15, T20, T25, T27, T30, Hex Security Bits - 1/8", 9/64", 5/32", 3/16") Security Driver Bit Set Shock Resistant Carrying Case Benefits Kit includes: bit holders, masonry drill bits, high speed titanium coated drill bits, flat screwdriver bits, hex screwdriver bits, phillips screwdriver bits, hex screwdriver bits, square screwdriver bits, torx screwdriver bits, spanner security bits, hex security bits, torx security bits, magnetic nut drivers, square socket adapters and drill taps. 1/4" Quick Change technology Professional grade driver bits Titanium Nitride coated self-centering high-speed drill bits The high-quality shock resistant case stays intact even after accidental drops Hammer drill rated carbide grade tips and hardened shank masonry drill bits Hardened forged magnetic nut drivers fit most TapCon fasteners Quick release chuck with a precise fit Includes security bits that fit most security fasteners frequently used in public facilities Technical Information Brand: Greenlee Length: 12.35" Width: 10.75" Height: 1.95" Weight: 2.35 lbs (1.06 kg)

Description Greenlee carries several electrician’s kits providing an assortment of the most commonly used Greenlee variable pitch hole saw sizes and arbors. High-impact, rugged plastic carrying case. Included in Kit The Following Individual Carbide-Tipped Hole Cutters: 7/8" Hole Saw, 825-7/8 (19136) 1-1/8" Hole Saw, 825-1-1/8 (19141) 1-3/8" Hole Saw, 825-1-3/8 (19146) 1-3/4" Hole Saw, 825-1-3/4 (19152) 2" Hole Saw, 825-2 (19155) 2-1/2" Hole Saw, 825-2-1/2 (19162) Arbor with Pilot Drill (Qty. 2), 38522 Arbor with Pilot Drill, 37156 Benefits Kit includes 7/8-Inch , 1-1/8-Inch , 1-3/8-Inch , 1-3/4-Inch , 2-Inch and 2-1/2-Inch hole saws, also included are two arbors with pilot drills Holesaw Kit cuts through steel, tin, aluminum, fiberglass, wood and plastic. High-impact, rugged plastic carrying case. Deep 1-5/8 In cut to go through wood studs. Extra-tough bi-metal blade made of highest grade tool steel. Steam oxide finish for cooler running saw. Extra-thick backplate minimizes vibration. Technical Information Brand: Greenlee Weight: 1.41 kg Product Dimensions: 35.56 x 25.4 x 8.89 cm Material: Metal Documents Brochure

Description The MILWAUKEE® 6" Saw Chain is to be used with the Milwaukee M12 FUEL™ HATCHET™ 6" Pruning Saw (2527-20). The Full House Chain features a cutter on every drive link, which minimizes vibration and delivers clean cuts. The design delivers fast cuts and minimizes kickback. The saw chain has a durable design and is weather-resistant for increased life. Benefits Full House design minimizes vibration and delivers clean cuts Low-Kickback Saw Chain (Meets ANSI B175.1 Standard) To be used with Narrow Kerf Bars Optimized to increase run-time Technical Information Length: 6" Pitch: 3/8" Low Profile Gauge: .043" Drive Links: 28 File Size: 4.5mm

Description The 18 in. Short sprayer wand is an accessory sprayer wand for Milwaukee SWITCH TANK™ sprayers (2820-21PS, 2820-20PS, 49-16-28PS, 2820-21CS, 49-16-28CS). The shorter length is optimized for broadcast spraying applications.

Description The MILWAUKEE® 4" HOLE DOZER™ Bi-Metal Hole Saws new 3.5TPI tooth design offers users the longest life in metal applications. These HOLE DOZER™ Bi-Metal Hole Saws feature the industry's only Lifetime Tooth Break Warranty and can take on all general purpose applications, making them the most durable hole saws. Our ALL-ACCESS SLOTS solve the frustration of plug removal, making users more productive with less downtime between holes. The new slot design also gives users increased pilot visibility for accurate placement and faster chip ejection keeping their cut cool. HOLE DOZER™ Thermoset Coating allows for faster cutting and is optimized for cordless tools, delivering users 25% more holes per charge. Milwaukee HOLE DOZER™ Bi-Metal hole saws are proudly made in the USA. Benefits RIP GUARD™ Limited Lifetime Tooth Break Warranty Thermoset Coating, Delivers Up to 2X Faster Cuts in Wood PLUG JACK™, an all access slot design for fast plug removal Bi-Metal construction with 8% cobalt for increased wear resistance Technical Information Size: 4'' hole Thread: 1/2"-20 Depth of Cut: 1-5/8"