Power Tool Accessories

Description The All-Purpose Step Bit Kit features 4 commonly used step bits, with dual spiral fluting to help pull the step bit through material for faster cutting. Titanium Nitride coating extends the life of the cutting edge. Convenient to use with an impact driver and drill, the 1/4-Inch hex shank provides a firm, positive grip. Kit comes in a rugged case that includes a convenient oil bottle for bit lubrication and longevity. Features All-Purpose Step Bit Kit with 4 common step bits sizes (1/2, 3/4, 7/8, and 1-3/8-Inch) cuts holes in wide variety of DIY applications and materials (up to 16 gauge steel, plastic, aluminum, wood) 2 spiral flutes on each step drill bit remove chips and help pull the bit through material for faster cutting Titanium nitride coating dissipates heat for longer bit life 1/4-Inch hex shank for firm, positive grip in impact driver and standard drill Split point tip quickly starts hole cuts and prevents drifting when pressure is added Kit comes with a convenient 1-Ounce oil bottle for lubrication between cuts to prolong step bit life Rugged case snaps shut with custom inserts for each bit and oil bottle Total of 37 hole sizes Technical information Type: Step Drill Bit Set Application: Multi-Material Drilling Special Features: TiN Coating, Impact Shaft, Dual Spiral Fluting, Oil Bottle, Custom Inserts in Protective Case Shank Type: 1/4'' Hex Flute Type: Spiral Overall Length: 8.75'' (22.2 cm) Overall Height: 4.9'' (12.3 cm) Overall Width: 2.75'' (7 cm) Material: High Speed Steel Quick Reference: #1, #3, #14, #15 Number of Holes: 37 Total Size: 1/8'' to 1/2'' (3.2 to 12.7 mm); 1/4'' to 3/4'' (6.4 to 19.1 mm); 3/16'' to 7/8'' (4.8 to 22.2 mm); 7/8'' to 1-3/8'' (22.2 to 34.9 mm) Weight: 25 oz (709 g) Document Brochure

Description This hole cutter kit cuts quick, precise holes in a variety of materials. Includes six commonly used size plus two extra pilot bits. Integrated flange prevents the operator from drilling beyond the sheet metal. Split point pilot drill bit prevents bit walking. Features Heavy duty, durable carbide hole cutters for long life Cuts quick, precise holes in stainless steel, mild steel, iron, copper and brass sheet up to 3/16-Inch (0.5 cm) thick Set contains: 7/8-Inch, 1-1/8-Inch, 1-3/8-Inch, 1-3/4-Inch, 2-Inch, 2-1/2-Inch, two extra pilot bits Split point pilot drill bit prevents bit walking Integrated flange prevents the operator from drilling beyond the sheet metal Conduit and pipe sizes: 1/2-Inch (1.3 cm) to 2-Inch (5.1 cm) All components are packed in a rust-proof, molded plastic carrying case Technical Information Type: Carbide Hole Cutter Application: Cut Quick, Precise Holes in Stainless Steel, Mild Steel, Iron, Copper and Brass Sheet up to 3/16'' (0.5 cm) Thick Special Features: Split Point Pilot Drill Bit to Prevent Bit Walking; Integrated Flange to Prevent the Operator from Drilling Beyond Sheet Metal Included: Sizes: 7/8'' (2.2 cm), 1-1/8'' (2.9 cm), 1-3/8'' (3.5 cm), 1-3/4'' (4.4 cm), 2'' (5.1 cm), 2-1/2'' (6.4 cm), 2 Extra Pilot Bits Weight: 4.3 lb (2.0 kg)

Description Klein's Hole Saw Arbor with Adapter can be used with all Klein hole saws. Fits all 3/8-Inch drills and larger. 5/8-Inch adapter allows use with larger hole saw diameters. Features For use with ALL Klein hole saws Fast and easy to engage and disengage hole saw Arbor adapter included for use with hole saws 1-3/8-Inch (35 mm) and larger 118 degree split point pilot bits Steel construction for long life See 31906 Arbor with Pins for large hole saws Technical Information Application: Hole Making Overall Length: 4.5'' (11.4 cm) Overall Height: 0.5'' (1.3 cm) Overall Width: 0.5'' (1.3 cm) Material: Steel Hole Diameter: 1/4'' (0.6 cm) Thread Length: 1/2''-20 Shank Diameter: 3/8'' Shank Style: Hexagonal Pins: N Electric Drill Size: 1/2'' (1.3 cm) and Larger Document Brochure

Description Fits all standard multi-bit screwdrivers and power drills Tamper-Proof Torx ® Bits have a retaining ring notch made from rugged S2M tool steel to fit all standard multi-bit screwdrivers and power drills. Their 1/4-in. hexagonal body is custom heat-treated to offer strength and durability, and is manufactured to ensure accurate fit and full fastener engagement. Features Made from rugged S2M tool Steel 100% made in the U.S.A. Custom heat treated for strength and durability Manufactured to tight tolerances to ensure accurate fit and full fastener engagement Insert bits have a retaining ring notch 1/4" hex body Document Catalogue

Description Use the combination drill/tap bit to complete hole drilling, tapping and deburring/countersinking tasks with your power drill. The bit is made of hardened high-speed steel for durability. Benefits Complete hole drilling, tapping and deburring/countersinking in one operation with power drill saves labor and time Back tapered beyond tap to prevent thread damage from over-drilling Deburr/countersink also provided on bit beyond back taper Made from hardened high-speed steel vs. carbon steel for longer life High quality hex shank to ensure strong connection to drill chuck Designed to tap up to 10-gauge metal Quick change adaptor included in both metric and standard kits Technical Information Brand: Greenlee Material Thickness: 10 Gauge Material Type: Mild Steel, Copper, Brass, Aluminum Shank: 1/4" Quick Change Hex Drill Material: Hardened high speed steel Drill Point: Split point with web thinning Size: 1/4-20NC

Description Features an innovative arbor that allows for rapid mounting or removal of hole saws, along with quick and easy slug removal. Use the pilot drill without the hole saw to eliminate the "bite" of when it crashes into steel, as well as better ergonomics and unobstructed view. Includes re-usable adapters to minimize the need for frequent replacement. Benefits New arbor allows for rapid mounting or removal of hole saws. Faster, easier slug removal. Eliminates the "bit" when saw crashes into the steel. Provides better ergonomics - reduced stress on wrist, arm and hand. Eliminates obstructed view from hole saw. Only one arbor required from 7/8" to 6" (7/16" shank recommended for hole saws above 2-1/2"). Works with recessed light and carbide grit hole saw products as well. Adapters re-usable to minimize costs. Universal - works with any brand hole saw. Technical Information Brand: Greenlee Application: Quick Change Hole Saw Kit for 1/2 -2" Conduit Size Arbor Size: 5/16 In Arbor, minimum chuck size 3/8 In. 7/16 In Arbor, minimum chuck size 1/2 In. Type: Bi-Metal Quick Change Shank: Available for 3/8" and heavy duty 1/2" chuck sizes Arbor Length: 5-1/2" with pilot drill Arbor Weight: 0.5 lbs. (227 g) Arbor Operation: Push collar to lock on saw; pull to release saw Arbor Pilot Drill: 37623, 4-1/8" x 1/4" (104.8 mm x 6.4 mm) Documents Brochure

Description Drill into wood with ease using the Greenlee 66PT-1 Extreme Nail Eater Bit. The heat-treated steel bit is tough, long-lasting and made with a powerful cutting edge. It also has a unique angled design that ensures smooth starts and reduced cutting loads. Pair this bit with your electric drill today. Benefits Made from tough, heat-treated steel with a powerful cutting edge Produces precise, clean holes Self-feeding screw point helps draw the bit through wood with ease Unique cutting angle ensures smooth starts and reduced cutting loads Capable of cutting through nails again and again For additional length, use a Greenlee bit extension (sold separately) Hexagonal shank type Improved cutting edge provides 30% longer life span Patented new design for improved cutting and cleaner holes Self-feeding screw point draws bit through wood Unique patented design cutting angle - smoother starts, reduced cutting loads Made of super tough, heat-treated steel Cuts through nails and provides longer life "Shorty" bits - for working in tight places, yet still can go through three abutting 2 x 4s Technical Information Brand: Greenlee Bit Diameter: 1" (25.4 mm) Shank Diameter: 7/16" (11.1 mm) Overall Length: 18" (457.2 mm) Twist Length: 15" (381 mm) Shank Type: Hexagonal Weight: 1.8 lb (817 g) Documents Brochure

Description The MILWAUKEE® 2" HOLE DOZER™ Bi-Metal Hole Saws new 3.5TPI tooth design offers users the longest life in metal applications. These HOLE DOZER™ Bi-Metal Hole Saws feature the industry's only Lifetime Tooth Break Warranty and can take on all general purpose applications, making them the most durable hole saws. Our ALL-ACCESS SLOTS solve the frustration of plug removal, making users more productive with less downtime between holes. The new slot design also gives users increased pilot visibility for accurate placement and faster chip ejection keeping their cut cool. HOLE DOZER™ Thermoset Coating allows for faster cutting and is optimized for cordless tools, delivering users 25% more holes per charge. Milwaukee HOLE DOZER™ Bi-Metal hole saws are proudly made in the USA. Benefits RIP GUARD™ Limited Lifetime Tooth Break Warranty Thermoset Coating, Delivers Up to 2X Faster Cuts in Wood PLUG JACK™, an all access slot design for fast plug removal Bi-Metal construction with 8% cobalt for increased wear resistance Technical Information Size: 2'' hole Thread: 1/2"-20 Depth of Cut: 1-5/8"

Description Milwaukee® M/2™ 2-cutter SDS-Plus rotary hammer drill bits are the most durable 2-cutter bits with up to 20% more holes per charge in cordless rotary hammers. The enhanced rebar guards provide increased durability in hard aggregate and rebar. Breaker point pulverize the material more effectively resulting in faster drilling speeds. The variable flute allows for maximum debris extraction leading to up 20% more holes per charge in cordless rotary hammer while making it a very durable bit in corded and cordless rotary hammers. Additionally, M/2™ features a centering tip for exact spot drilling, wear mark indicator indicating when the bit no longer meets ANSI diameter requirements, and a reinforced flute for durability and minimized vibration. The increased life and efficiency of the M/2™ 2-cutter drill bit line provides the ideal solution in general concrete for cordless and corded rotary hammer users. Benefits Enhanced Rebar Guards provide increased durability Breaker Points lead to faster drilling speeds Variable Flute for Up to 20% more Holes per Charge in Cordless Rotary Hammers Centering Tip for exact spot drilling Wear Mark Indicators to show end of life and when bit no longer meets the ANSI requirement Reinforced Flutes for minimized vibration and maximum durability Technical Information Cutter Geometry: 2-Cutter Style: SDS-PLUS Total Length: 6'' Useable Length: 4'' Diameter: 5/16''

Description Professionals depend on Klein Tools' Flex Bit Extension when they need a longer drill bit. Perfect for drilling between walls or several rafters. For use with flex bits 9/16-inch (14 mm) and smaller. Features Connects to the end of a flex bit and extends the length For use with flex bits 9/16-Inch (14 mm) and smaller Connection diameter is 7/16-Inch (11 mm) Ideal in applications where additional drill bit length is required, such as drilling between walls or several rafters Technical Information Connection Diameter: 7/16'' (1.1 cm) For Use With: 9/16'' (1.4 cm) and Smaller Overall Length: 54'' (137.2 cm) Weight: 1 .0 lb (0.5 kg) UPC: 092644537233

Description Color coding? It’s so simple, but it works. Racky Bits are easier to use and harder to lose, saving you a ton of time. Our genuine Robertson bits have hardened tips that fit better and last longer. Red #2 Robertson Square Bit, 3 inches long.

Description The dual spiral flutes on Klein Step Drill Bits help pull the step bit through the material for faster cutting. The aluminum titanium coating is 10 times more durable than steamed black oxide for longer bit life. Impact rated, the 1/4-Inch hex shank provides a firm, positive grip and allows quick and convenient usage with an impact driver and a drill. Three hole sizes with laser marking for easy identification. Features Step bits are coated with aluminum titanium nitride and are 10 times more durable than steamed black oxide coating for longer bit life Impact rated shaft allows for use with impact drivers and standard drills Double spiral flute removes chips for faster cuts and drilling Laser markings are easy to read for quick size identification of three hole sizes Fast-starting, non-walking drill tip Quick-release, 1/4-Inch hex shank provides a firm, positive grip and won't spin out in the drill For use on steel (up to 16 gauge), wood, plastic, and aluminum Technical Information Type: Step Drill Bit Application: Multi-Material Drilling Special Features: Aluminum Titanium Coating; Impact Shaft; Dual Spiral Fluting Shank Type: 1/4'' Hex Flute Type: Spiral Overall Length: 1.8'' (4.6 cm) Overall Height: 3.6'' (9.4 cm) Overall Width: 1.8'' (4.6 cm) Material: High Speed Steel Coating: Aluminum Titanium Number of Holes: 3 Size: 7/8'' to 1-3/8'' (22.2 mm to 34.9 mm) Weight: 6.8 oz (193 g) Document Brochure

Description The dual spiral flutes on Klein Step Drill Bits help pull the step bit through the material for faster cutting. The aluminum titanium coating is 10 times more durable than steamed black oxide for longer bit life. Impact rated, the 1/4-Inch hex shank provides a firm, positive grip and allows quick and convenient usage with an impact driver and a drill. Three hole sizes with laser marking for easy identification. Features Step bits are coated with aluminum titanium nitride and are 10 times more durable than steamed black oxide coating for longer bit life Impact rated shaft allows for use with impact drivers and standard drills Double spiral flute removes chips for faster cuts and drilling Laser markings are easy to read for quick size identification of two hole sizes Fast-starting, non-walking drill tip Quick-release, 1/4-Inch hex shank provides a firm, positive grip and won't spin out in the drill For use on steel (up to 16 gauge), wood, plastic, and aluminum Technical Information Type: Step Drill Bit Application: Multi-Material Drilling Special Features: Aluminum Titanium Coating; Impact Shaft; Dual Spiral Fluting Shank Type: 1/4'' Hex Flute Type: Spiral Overall Length: 1.13'' (2.9 cm) Overall Height: 3.22'' (8.2 cm) Overall Width: 1.13'' (2.9 cm) Material: High Speed Steel Coating: Aluminum Titanium Number of Holes: 2 Size: 7/8'' to 1-1/8'' (22.2 to 28.6 mm) Weight: 3.68 oz (104 g) Document Brochure

Description Quick Change Carbide Tipped Hole Cutter 1-1/8" (28.6 mm). Cuts stainless steel quickly and easily. Quick Change arbor allows you to change cutter heads with a simple push and a turn. Use the same arbor for different size cutting heads. Removable cutter heads available in sizes from 5/8" through 3". Flange stop prevents over-drilling. Ejector spring on all sizes above 3/4" makes removal of slug easier. Replaceable, cobalt-steel pilot drill with split-point tip to prevent walking. Precision carbide teeth for optimum performance and durability. Minimum chuck size of 3/8". ** 645-011 arbor sold separately Features Switch quickly between cutter sizes without re-chucking, with a simple push and turn connection Split-Point Cobalt Steel Pilot Drill with step design – for fast, accurate metal cutting with less force Tungsten Carbide Teeth – optimized design for fast, easy cutting and maximum life in stainless steel – no oil required Flange Stop – eliminates over-drilling Slug Ejector Spring – quick, easy slug removal This metal cutter tool produces round, burr-free holes Technical Information Application: Stainless steel, mild steel, aluminum, copper, brass, fiberglass and plastics Type: Carbide-Tipped Hole Cutter Hole Size: 1-1/8" (28.6 mm) for 3/4" conduit Shank Size: 645-011 arbor sold separately (3/8" shank) Maximum Cutting Size: 8 ga Cutting Edge: Tungsten Carbide Teeth Pilot Drill Replacement: 645-001 sold separately Pilot Drill Size: 1/4" x 2-1/2" (6 mm x 64 mm) Document Brochure Instruction

Description Klein's 6-Piece Impact Socket Set consisting of the commonly used impact socket sizes used in utility and construction work. Includes two 3-in-1 sockets with an alignment slot to tighten and loosen most pole hardware. Each impact socket features two coaxial spring-loaded sockets in one. The high-torque, 12-Point design is easier to position on fasteners including square ones. Bundled in a convenient carrying case. Features Twelve sizes combined into six sockets including: 1-1/8 x 15/16-Inch, 1 x 13/16-Inch, 7/8 x 11/16-Inch, 3/4 x 9/16-Inch, 5/8 x 7/16-Inch, and 1/2 x 3/8-Inch 1-1/8 x 15/16-Inch and 3/4 x 9/16-Inch impact sockets features an alignment slot to tighten and loosen most pole hardware Single-ended impact socket wrenches with hands free adjustment between socket sizes Two coaxial spring loaded sockets in one tool Sockets have a high-torque, 12-Point design making it easier to position on fasteners Deep socket with a 1/2-Inch drive works great for pole hardware installation and removal Cross hole design helps maintain socket connection to adapter or impact wrench Engineered for use with impact wrenches including Klein's 1/2-Inch Compact Impact Wrench (Cat. Nos. BAT20-CW, BAT20-CW1) Sockets are color coded to quickly identify slotted and sizes Includes case for storage Technical Information Type: Impact Rated Application: Pole Hardware Installation and Removal Special Features: Slotted Socket, Hands-Free Adjustment Overall Length: 4.4'' (11.2 cm) Overall Height: 8.8'' (22.4 cm) Overall Width: 2.3'' (5.8 cm) Material: 4140 Steel Drive Size: 1/2'' Socket Size: 1-1/8 x 15/16'', 1 x 13/16'', 7/8 x 11/16'', 3/4 x 9/16'', 5/8 x 7/16'', 1/2 x 3/8'' Number of Points: 12 Standard: ASME B107.2 Weight: 3.5 lb (1.6 kg) Document Brochure

Description Single-ended impact socket with hands-free adjustment between 1-1/8-Inch and 15/16-Inch hex sizes. Deep socket with a 1/2-Inch drive is great for use in electrical and construction work. The high-torque, 6-Point design is easier to position and works with square fasteners. Features Single-ended impact socket with hands-free adjustment between socket sizes Two coaxial spring-loaded 1-1/8 x 15/16-Inch hex socket sizes in one tool Deep socket with a 1/2-Inch drive works great for hardware installation and removal High-torque, 6-Point design is easier to position and works with square fasteners Cross hole design to prevent unintentional separation of adapter and socket Engineered for use with impact wrenches including Klein's 1/2-Inch Compact Impact Wrench (Cat. Nos. BAT20-CW, BAT20-CW1) Socket is color coded to quickly identify size Great for general electrical and construction work Technical Information Type: Impact Rated Application: Pole Hardware Installation and Removal Special Features: Hands-Free Adjustment Overall Length: 3.1'' (7.9 cm) Overall Height: 1.5'' (3.8 cm) Overall Width: 1.5'' (3.8 cm) Material: 4140 Steel Drive Size: 1/2'' Socket Size: 1-1/8 x 15/16'' Number of Points: 6 Standard: ASME B107.2 Weight: 1.1 lb (0.5 kg) UPC: 092644651106 Document Brochure

Description This coated impact socket features two sizes (3/4-Inch and 9/16-Inch) in one tool. Designed for use with an impact wrench, this socket is 20-Percent lighter than traditional impact sockets. The 12-Point design is easier to position and works with square fasteners. The bright blue, durable plastic coating protects against damage from scratching and abrasion and is easy to spot in a crowded bucket. Features Coated Impact Socket is 20-Percent lighter than traditional impact sockets* Blue coating is easy to spot in a crowded tool bag Durable plastic coating protects against damage due to scratching and abrasion Featuring two of the most commonly used socket sizes (3/4-Inch and 9/16-Inch) in one tool Single-ended impact socket with hands-free adjustment between socket sizes High-torque, 12-Point design is easier to position and works with square fasteners Deep socket with a 1/2-Inch drive works great for pole hardware installation and removal Cross hole design to prevent unintentional separation of adapter and socket Engineered for use with impact tools including Klein's 1/2-Inch Compact Impact Wrench (Cat. Nos. BAT20CW, BAT20CW1) *As Compared to Klein Tools 66001 socket Technical Information Type: Impact Rated Application: Pole Hardware Installation and Removal Special Features: Bright Blue Plastic Coating for Easy Identification Overall Length: 3.1'' (7.9 cm) Overall Height: 1.1'' (2.8 cm) Overall Width: 1.1'' (2.8 cm) Material: 4140 Steel Drive Size: 1/2'' Socket Size: 3/4'' x 9/16'' Number of Points: 12 Standard: ASME B107.2 Weight: 0.8 oz (23 g) Document Brochure

Description Klein's Hole Saw Arbor with Adapter can be used with Klein hole saws 1-3/8-Inch to 6-3/8-Inch (35 to 162 mm). Fits all 3/8-Inch drills and larger. Features For use with Klein hole saws 1-3/8-Inch to 6-3/8-Inch (35 mm to 162 mm) Pins lock the saw to prevent over-tightening Hardened mandrel for long thread life Fast and easy to engage and disengage hole saw Steel construction for added durability 118-degree split point pilot bits Technical Information Thread Length: 5/8''-18 Shank Diameter: 7/16'' Shank Style: Hexagonal Pins: Y Electric Drill Size: 1/2'' (1.3 cm) and Larger Document Brochure

Description This carbide hole cutter cuts quick, precise holes in a variety of materials. Integrated flange prevents the operator from drilling beyond the sheet metal. Split point pilot drill bit prevents bit walking. Features Cuts quick, precise holes in stainless steel, mild steel, iron, copper and brass sheet up to 3/16-Inch (5 mm) thick Split point pilot drill bit prevents bit walking Integrated flange prevents the operator from drilling beyond the sheet metal Conduit and pipe sizes: 3/4-Inch (19 mm) Uses replacement pilot bit 31874 Technical Information Hole Diameter: 1-1/8'' (2.9 cm) Conduit Sizes: 0.75'' (1.9 cm) Shank Size: 3/8'' (1 cm)

Description These Double-Fluted Step Drill Bits provide faster cutting and drilling than single flute bits. The easy-to-read step markings and targets save time when drilling holes. Thick 3/8-Inch hex shank provides a firm, positive grip and won't spin out in the drill. Features Two flutes on this Step Drill Bit cut faster and keep bit cooler Fast-starting, non-walking drill tip High-visibility silver targets for primary hole sizes Thick 3/8-Inch hex shank won't round out in the drill chuck for a more positive grip 12 hole sizes Technical Information Application: For Multi-Material Drilling Material: High Speed Steel Quick Reference: #14 Number of Holes: 12 Increment: 1/16'' (1.6 mm) Size: 3/16'' to 7/8'' (4.8 to 22.2 mm) Document Brochure

Description IDEAL Electrical’s line of TKO™ Carbide-Tipped Hole Cutters offer the most efficient and clean cutter replacement for traditional knockouts, by making smooth holes in a fraction of the time at a fraction of the cost. Specifically designed to cut sheet metal, IDEAL TKO™ cutters will even cut stainless steel with their precision engineered ground carbide tips. The innovative design includes the exclusive SmoothStart™ replaceable pilot drill, which guides the cutter to the surface, avoiding cutter damage and providing smoother holes. With an integral over-drill flange the IDEAL TKO™ prevents cutter penetration beyond the sheet metal. When it comes to quality, performance and durability, IDEAL is the professional’s choice for carbide-tipped hole cutters. Features Integrated arbor provides solid rotation SmoothStart ™ Pilot Drill prevents bit from “walking” on smooth surfaces Precision ground carbide teeth for fast cutting of clean, burr-free holes Designed specifically for sheet metal and stainless steel Built-in over drill flange prevents penetration beyond the sheet metal Technical Information Saw Diameter: 1-3/8" Pipe Tap Size: 1" Cable Cutter Materials Cut: Aluminum Saw Blade Material: Carbide Tipped Document Catalogue

Description This kit includes the 3 most common sizes, along with a spare SmoothStart™ pilot bit and a convenient carrying case. IDEAL Electrical’s line of TKO™ Carbide-Tipped Hole Cutters offer the most efficient and clean cutter replacement for traditional knockouts, by making smooth holes in a fraction of the time at a fraction of the cost. Specifically designed to cut sheet metal, IDEAL TKO™ cutters will even cut stainless steel with their precision engineered ground carbide tips. The innovative design includes the exclusive SmoothStart™ replaceable pilot drill, which guides the cutter to the surface, avoiding cutter damage and providing smoother holes. With an integral over-drill flange the IDEAL TKO™ prevents cutter penetration beyond the sheet metal. When it comes to quality, performance and durability, IDEAL is the professional’s choice for carbide-tipped hole cutters. Kit Includes 1x 36-301 7/8" 1x 36-303 1-1/8" 1x 36-305 1-3/8" 1x 36-312 Replacement Pilot Bit 1x Carrying case Technical Information Cable Cutter Materials Cut: Aluminum Saw Blade Material: Carbide Tipped Kit Type: Carbide Hole Cutters Document Catalogue

Description Make quick work of your task list with the drill/tap bit. The bit is designed to work with a variety of materials up to 0.25" (6.35 mm) thick. Benefits Split-point tip resists walking and penetrates material faster Strong, high-speed steel provides superior resistance to heat and abrasion Titanium Nitride coating ensures that the bits run cooler, drill faster, and last longer Optimized core for significantly reduced torque on the user and extended tool life Designed to drill in up to ¼” thick material Durable case and quick-change adapter included Technical Information Brand: Greenlee Size: 10-32 Point Type: Split-Point Tip Material: High-Speed Steel Finish: Titanium Nitride Application: Stainless Steel, Mild Steel, Aluminum, Brass, Copper, Fiberglass and Plastics Documents Brochure Tips for Optimal Performance

Description Make quick work of your task list with the drill/tap bit. The bit is designed to work with a variety of materials up to 0.25" (6.35 mm) thick. Benefits Split-point tip resists walking and penetrates material faster Strong, high-speed steel provides superior resistance to heat and abrasion Titanium Nitride coating ensures that the bits run cooler, drill faster, and last longer Optimized core for significantly reduced torque on the user and extended tool life Designed to drill in up to ¼” thick material Durable case and quick-change adapter included Technical Information Brand: Greenlee Size: 1/4-20 Point Type: Split-Point Tip Material: High-Speed Steel Finish: Titanium Nitride Application: Stainless Steel, Mild Steel, Aluminum, Brass, Copper, Fiberglass and Plastics Documents Brochure Tips for Optimal Performance

Description It's easy to drill holes into steel when you have the Greenlee 645-1-3/8 Quick-Change Carbide-Tipped Hole Cutter. It features a design that allows for fast cutter head changes, and the flange stop helps prevent over-drilling from occurring. ** 645-011 arbor sold separately Benefits Switch quickly between cutter sizes without re-chucking, with a simple push and turn connection Split-Point Cobalt Steel Pilot Drill with step design – for fast, accurate cutting with less force Tungsten Carbide Teeth – optimized design for fast, easy cutting and maximum life in stainless steel – no oil required Flange Stop – eliminates over-drilling Slug Ejector Spring – quick, easy slug removal Cuts round, burr-free holes Works well on 1" (2.54 cm) conduit Technical Information Brand: Greenlee Application: Stainless steel, mild steel, aluminum, copper, brass, fiberglass and plastics Hole Size: 1-3/8" (34.9 mm) for 1" conduit Type: Carbide-Tipped Hole Cutter Max Cutting Depth: 8 ga Cutting Edge: Tungsten Carbide Teeth Pilot Drill: Replacement 645-001 sold separately Pilot Drill Size: 1/4" x 2-1/2" (6 mm x 64 mm) Documents Brochure Instruction Manual

Description The Milwaukee® 10 in. saw chain is to be used with the M18™ FUEL™ 10 in. pole saw with QUIK-LOK™ (2825-21PS) and M18™ FUEL™ QUIK-LOK™ 10 in. pole saw attachment (49-16-2720). The replacement saw chain design provides fast cuts with low vibration and minimum kickback. The chain features a durable design and is weather resistant for increased life. Benefits For Use with the Milwaukee® M18 FUEL™ QUIK-LOK™ 10" Pole Saw (49-16-2720) Bar Length: 10" Gauge: .043" Pitch: 3/8" Low Profile™ Drive Lengths: 40 To Be Used with Narrow Kerf Bars Technical Information Height: 0.5" Length: 10" Weight: 0.3 lbs Width: 0.04