Items Not in Stock

Description The deep, open-throat design of the Ship Auger bit clears chips for faster, cleaner cuts. The shank is 7/16-Inch hex to fit 1/2-Inch (13 mm) and larger three-jaw chucks. Used for heavy construction and repair work in mines, on docks and bridges as well as electrical work. Features Bits drill through nails, wood, vinyl, plastics, and heavy timber Special bit steel with machine-ground flutes and polished edges for smooth, wobble-free boring Head and twist are ground to correct clearance for easy removal from hole Feed-screw pilot draws bit into wood Full length is heat-treated and tempered For heavy construction and repair work in mines, on docks and bridges as well as electrical work Technical Information Bit Diameter: 3/4'' (19 mm) Shank Diameter: 0.4'' Twist Length: 4'' (10.2 cm) Overall Length: 6'' (15.2 cm)

Description These Double-Fluted Step Drill Bits provide faster cutting and drilling than single flute bits. The easy-to-read step markings and targets save time when drilling holes. Thick 3/8-Inch hex shank provides a firm, positive grip and won't spin out in the drill. Features Two flutes on this Step Drill Bit cut faster and keep bit cooler Fast-starting, non-walking drill tip High-visibility silver targets for primary hole sizes Thick 3/8-Inch hex shank won't round out in the drill chuck for a more positive grip 3 hole sizes Technical Information Application: For Multi-Material Drilling Material: M2 Steel Quick Reference: #15 Number of Holes: 3 Size: 7/8'' to 1-3/8'' (22.2 to 34.9 mm) Document Brochure

Description These Double-Fluted Step Drill Bits provide faster cutting and drilling than single flute bits. The easy-to-read step markings and targets save time when drilling holes. Thick 3/8-Inch hex shank provides a firm, positive grip and won't spin out in the drill. Features Two flutes on this Step Drill Bit cut faster and keep bit cooler Fast-starting, non-walking drill tip High-visibility silver targets for primary hole sizes Thick 3/8-Inch hex shank won't round out in the drill chuck for a more positive grip Two hole sizes Technical Information Application: For Multi-Material Drilling Overall Length: 3.15'' (8 cm) Material: High Speed Steel Quick Reference: #11 Number of Holes: 2 Size: 7/8'' to 1-1/8'' (22.2 to 28.6 mm) Document Brochure

Description These Double-Fluted Step Drill Bits provide faster cutting and drilling than single flute bits. The easy-to-read step markings and targets save time when drilling holes. Thick 3/8-Inch hex shank provides a firm, positive grip and won't spin out in the drill. Features Two flutes on this Step Drill Bit cut faster and keep bit cooler Fast-starting, non-walking drill tip High-visibility silver targets for primary hole sizes Thick 3/8-Inch hex shank won't round out in the drill chuck for a more positive grip 9 hole sizes Made from high speed steel 1/16-Inch increments Technical Information Application: For Multi-Material Drilling Material: High Speed Steel Quick Reference: #3 Number of Holes: 9 Increment: 1/16'' (1.6 mm) Size: 1/4'' to 3/4'' (6.4 to 19.1 mm) Document Brochure

Description These premium, heavy duty cable ties are used to wrap and contain cables and other items. With 50 pounds of tensile strength, these ties offer a strong hold. Made of nylon for durability. Available in 11.5-Inch lengths. Benefits Multi-purpose cable ties help manage messy cable and other items; perfect for jobsite, home, office or workshop 50-Pound (23 kg) tensile strength Self-locking with durable teeth for strong hold Angled tip for easy feed For indoor or outdoor use - UV resistant Made of high quality nylon for strength 7.75-Inch (20 cm) lengths Pack of 100 Technical Information Type: Cable Tie Application: Cable Management Special Features: Angled Tip Material: Nylon Color: Black Surface Texture: Smooth Lock Style: Self-Locking Tensile Strength: 50 lb (23 kg) Maximum Diameter: 1.75'' (4.5 cm) Temperature Range: -40° to 185°F (-40° to 85°C) Indoor/Outdoor: Yes Overall Length: 7.75'' (20 cm) Overall Height: 0.01'' (0.03 cm) Overall Width: 0.25'' (0.6 cm) Weight: 0.02 oz (0.6 g) Package Quantity: 100 Document Brochure

Description Stretch Cable Tie Roll helps organize cables, wires, cords or anything that needs bundling. Pull one end through rectangular hole on the opposite end and twist to lock in place. This exclusive design, also, features screw holes for more permanent mounting. The roll can be cut to any length needed. Benefits Stretch Cable Tie Roll helps organize cable, wires or anything that needs bundling Exclusive design features optional screw holes for mounting Easily cut to length Made in USA Self-locking at any diameter Made of heavy-duty specialty nylon to withstand time without sagging 75 feet of stretch cable tie to the roll Sold in convenient dispenser box Standalone or mountable Technical Information Type: Cable Tie Application: Cable Management Special Features: Twist and Lock Design Material: Nylon Color: Black Surface Texture: Smooth Lock Style: Twist and Lock Tensile Strength: 40 lb (18 kg) Maximum Diameter: 23.8' (7.3 m) Temperature Range: Storage: 14° to 140°F (-10° to 60°C); Operating: 32° to 122°F (0° to 50°C) Indoor/Outdoor: Yes Overall Length: 75' (23 m) Overall Height: 0.1'' (0.25 cm) Overall Width: 0.5'' (1.3 cm) Weight: 1.7 lb (0.77 kg) Document Brochure

Description Hide messy cable bundles with Klein's Cable and Wire Management Sleeves. The 3-Foot long sleeve can be cut shorter if needed. Hook and loop design lets you adjust to fit a variety of diameters. Easily wrap the durable and reusable, black sleeves around your cables to organize any space. Benefits Cable Management Sleeves help organize and hide cables at the home, office or job site 3-Foot long sleeve can be cut to shorter length if desired Made of sturdy material with hook and loop seal firmly attached with backstitching and glue ''Loop'' feature runs the entire inner surface allowing sleeve to be sealed to any diameter Flexible material for ease of use and clean look 5-Inch width allows a 1-1/4-Inch max diameter Durable and reusable 2-Pack Technical Information Type: Cable Sleeve Application: Cable Management Special Features: Adjustable Hook and Loop Color: Black Material: Neoprene Closure Type: Hook and Loop Expandable: Y Overall Length: 3' (91 cm) Overall Height: 0.1'' (0.3 cm) Overall Width: 1.25'' (3.2 cm) Diameter: 1.25'' x 3' (3.2 cm × 91 cm) Inside Diameter: 1.25'' (3.2 cm) Temperature Range: 23° to 140°F (-5° to 60°C) Weight: 3.2 oz (91 g) Document Brochure

Description Exclusive Klein-designed CAT6A Pass-Thru™ modular plugs for fast, reliable connector installations for data applications. CAT6A shielded cable easily passes through connector for consistent and secure termination. Saves time, trims flush to end face when used with Klein Tools Pass-Thru™ Modular Crimper Cat. No. VDV226-110, and eliminates wasted materials. Features Klein exclusive Pass-Thru™ Connectors provide fast, reliable connector installations for data applications For CAT6A shielded cable and larger diameter/thicker jacket CAT6 cable CAT6A cable easily passes through connector to visually ensure that wires are in the correct order for consistent and secure terminations Fully compliant with Power Over Ethernet (PoE and PoE+) standards Requires pass-through type crimping tool (Cat. No. VDV226-110 recommended) 8 position, 8 contact pass-through type data plugs for solid or stranded wire Category 6A performance per TIA/EIA-568-B.2 100-Pack 50 µ-inch gold plating on all contact surfaces Max diameter for CAT6A Pass-Thru™ Connectors is 0.043-Inch (1.1 mm) Technical Information Type: Modular Application: Data Special Features: Pass-Thru™ Technology; Meets All PoE+ Standards Overall Length: 0.8'' (2 cm) Overall Height: 0.6'' (1.5 cm) Overall Width: 0.4'' (1 cm) Material: PVC Plastic; Gold Plated Contacts Connector Type: RJ45 Cable Type: CAT6A STP and Larger Diameter CAT6 Position & Contacts: 8P 8C Connector Color: Clear Solid Conductor Wire: Yes Stranded Conductor Wire: Yes Package Quantity: 100 Weight: 10.21 oz (289 g) Document Brochure Instruction

Description Exclusive Klein-designed CAT6A Pass-Thru™ modular plugs for fast, reliable connector installations for data applications. Cable easily passes through connector for consistent and secure termination. Saves time, trims flush to end face when used with Klein Tools Pass-Thru™ Modular Crimper Cat. No. VDV226-110, and eliminates wasted materials. Features Klein exclusive Pass-Thru™ Connectors provide fast, reliable connector installations for data applications For CAT6A cable and larger diameter/thicker jacket CAT6 cable CAT6A cable easily passes through connector to visually ensure that wires are in the correct order for consistent and secure terminations Fully compliant with Power Over Ethernet (PoE and PoE+) standards Requires pass-through type crimping tool (Cat. No. VDV226-110 recommended) 8 position, 8 contact pass-through type data plugs for solid or stranded wire Category 6A performance per TIA/EIA-568-B.2 200-Pack 50 µ-inch gold plating on all contact surfaces Max diameter for CAT6A Pass-Thru™ Connectors is 0.043-Inch (1.1 mm) Technical Information Type: Modular Application: Voice and Data Special Features: Pass-Thru™ Technology; Meets All PoE+ Standards Overall Length: 0.875'' (2.2 cm) Overall Height: 0.453'' (1.2 cm) Overall Width: 0.094'' (0.2 cm) Material: PVC Plastic; Gold Plated Contacts Connector Type: RJ45 Cable Type: CAT6A UTP and Larger Diameter CAT6 Position & Contacts: 8P 8C Connector Color: Clear Solid Conductor Wire: Yes Stranded Conductor Wire: Yes Package Quantity: 200 Weight: 9.34 oz (265 g) Document Brochure Instruction

Description nVent Nuheat Cable is an easy-to-install electric floor heating system that combines installation versatility with advanced new technology. Choose the cable kit that is best suited for the size of the room/area and configure it on-site to provide floor heat in the desired areas of the room. Benefits Heats tile, stone, and laminate/engineered wood floors On-site flexibility Flexible wire spacing and heat output Compatible with nVent Nuheat Membrane Comprehensive selection of sizes to choose from Suitable for wet environments such as showers and steam rooms Redesigned, thinner cold-lead and factory splice New mid-point marker on the heating cable Technical Information Operating Voltage: 240 V Length: 358' Amperage: 4.6 amps Surface covering: 90 sq. ft. Power Output: 12 - 15 watts per square foot Maximum Ambient Temperature: 194°F (90°C) Material: Two single conductor Tefzel-coated resistance wires covered by a tin-plated copper braid and then coated with a durable copolymer (PVC) outer jacket Documents Brochure Installation Guide

Description nVent Nuheat Cable is an easy-to-install electric floor heating system that combines installation versatility with advanced new technology. Choose the cable kit that is best suited for the size of the room/area and configure it on-site to provide floor heat in the desired areas of the room. Benefits Heats tile, stone, and laminate/engineered wood floors On-site flexibility Flexible wire spacing and heat output Compatible with nVent Nuheat Membrane Comprehensive selection of sizes to choose from Suitable for wet environments such as showers and steam rooms Redesigned, thinner cold-lead and factory splice New mid-point marker on the heating cable Technical Information Operating Voltage: 240 V Length: 630' Amperage: 8.0 amps Surface covering: 160 sq. ft. Power Output: 12 - 15 watts per square foot Maximum Ambient Temperature: 194°F (90°C) Material: Two single conductor Tefzel-coated resistance wires covered by a tin-plated copper braid and then coated with a durable copolymer (PVC) outer jacket Documents Brochure Installation Guide

Description nVent Nuheat Cable is an easy-to-install electric floor heating system that combines installation versatility with advanced new technology. Choose the cable kit that is best suited for the size of the room/area and configure it on-site to provide floor heat in the desired areas of the room. Benefits Heats tile, stone, and laminate/engineered wood floors On-site flexibility Flexible wire spacing and heat output Compatible with nVent Nuheat Membrane Comprehensive selection of sizes to choose from Suitable for wet environments such as showers and steam rooms Redesigned, thinner cold-lead and factory splice New mid-point marker on the heating cable Technical Information Operating Voltage: 240 V Length: 529' Amperage: 6.8 amps Surface covering: 135 sq. ft. Power Output: 12 - 15 watts per square foot Maximum Ambient Temperature: 194°F (90°C) Material: Two single conductor Tefzel-coated resistance wires covered by a tin-plated copper braid and then coated with a durable copolymer (PVC) outer jacket Documents Brochure Installation Guide

Description nVent Nuheat Cable is an easy-to-install electric floor heating system that combines installation versatility with advanced new technology. Choose the cable kit that is best suited for the size of the room/area and configure it on-site to provide floor heat in the desired areas of the room. Benefits Heats tile, stone, and laminate/engineered wood floors On-site flexibility Flexible wire spacing and heat output Compatible with nVent Nuheat Membrane Comprehensive selection of sizes to choose from Suitable for wet environments such as showers and steam rooms Redesigned, thinner cold-lead and factory splice New mid-point marker on the heating cable Technical Information Operating Voltage: 120 V Length: 474' Covering Surface: 120 sq. ft. Amperage: 12.2 amps Power Output: 12 - 15 watts per square foot Maximum Ambient Temperature: 194 °F (90°C) Material: Two single conductor Tefzel-coated resistance wires covered by a tin-plated copper braid and then coated with a durable copolymer (PVC) outer jacket Documents Brochure Installation Guide

Description nVent Nuheat Cable is an easy-to-install electric floor heating system that combines installation versatility with advanced new technology. Choose the cable kit that is best suited for the size of the room/area and configure it on-site to provide floor heat in the desired areas of the room. Benefits Heats tile, stone, and laminate/engineered wood floors On-site flexibility Flexible wire spacing and heat output Compatible with nVent Nuheat Membrane Comprehensive selection of sizes to choose from Suitable for wet environments such as showers and steam rooms Redesigned, thinner cold-lead and factory splice New mid-point marker on the heating cable Technical Information Operating Voltage: 120 V Length: 47' Covering Surface: 12 sq. ft. Amperage: 1.2 amps Power Output: 12 - 15 watts per square foot Maximum Ambient Temperature: 194 °F (90°C) Material: Two single conductor Tefzel-coated resistance wires covered by a tin-plated copper braid and then coated with a durable copolymer (PVC) outer jacket Documents Brochure Installation Guide

Description ***Traditional hardwood is typically not recommended to be installed over an electric floor heating system because the repeated heating and cooling cycles may damage the wood. Standard Mats are the thinnest and easiest to install. Standard Mats are only 1/8” thick and eliminate the need to configure the heating wires during installation. Standard Mats come in various dimensions. Simply pick the size of the mat(s) that fits the desired heating area. Because the heating wire is embedded in the Standard Mat and does not need to be configured during installation, the heat coverage is guaranteed to be consistent throughout the desired heating area. Benefits Easy to install Error-Free Reduces installation time Does not raise floor height Comprehensive selection of sizes to choose from Nuheat is approved for installation under tile, stone, marble, laminate, engineered wood, and luxury vinyl flooring Technical Information Dimension: 10'x3.5' Amperage: 1.7 amps Power Output: 413 watts Material: Consist of a single-conductor tinned copper braided heating wire sandwiched in a pre-configured pattern between durable, two porous layers of fabric ​Operating Voltage: 240 V ​Maximum Continuous Exposure Temperature: 194°F (90°C) ​Heating Cable: Single wire with ground braid outer layer ​Cold Lead: 2-wire, 18 AWG plus ground braid layer; 10 ft (3m) length Documents Brochure Installation Instructions Mat Shower Installation Instructions List of material needed to install

Description ***Traditional hardwood is typically not recommended to be installed over an electric floor heating system because the repeated heating and cooling cycles may damage the wood. Standard Mats are the thinnest and easiest to install. Standard Mats are only 1/8” thick and eliminate the need to configure the heating wires during installation. Standard Mats come in various dimensions. Simply pick the size of the mat(s) that fits the desired heating area. Because the heating wire is embedded in the Standard Mat and does not need to be configured during installation, the heat coverage is guaranteed to be consistent throughout the desired heating area. Benefits Easy to install Error-Free Reduces installation time Does not raise floor height Comprehensive selection of sizes to choose from Nuheat is approved for installation under tile, stone, marble, laminate, engineered wood, and luxury vinyl flooring Technical Information Dimension: 7'x3.5' Amperage: 1.2 amps Power Output: 294 watts Material: Consist of a single-conductor tinned copper braided heating wire sandwiched in a pre-configured pattern between durable, two porous layers of fabric ​Operating Voltage: 240 V ​Maximum Continuous Exposure Temperature: 194°F (90°C) ​Heating Cable: Single wire with ground braid outer layer ​Cold Lead: 2-wire, 18 AWG plus ground braid layer; 10 ft (3m) length Documents Brochure Installation Instructions Mat Shower Installation Instructions List of material needed to install

Description ***Traditional hardwood is typically not recommended to be installed over an electric floor heating system because the repeated heating and cooling cycles may damage the wood. Standard Mats are the thinnest and easiest to install. Standard Mats are only 1/8” thick and eliminate the need to configure the heating wires during installation. Standard Mats come in various dimensions. Simply pick the size of the mat(s) that fits the desired heating area. Because the heating wire is embedded in the Standard Mat and does not need to be configured during installation, the heat coverage is guaranteed to be consistent throughout the desired heating area. Benefits Easy to install Error-Free Reduces installation time Does not raise floor height Comprehensive selection of sizes to choose from Nuheat is approved for installation under tile, stone, marble, laminate, engineered wood, and luxury vinyl flooring Technical Information Dimension: 6'x4' Amperage: 1.2 amps Power Output: 288 watts Material: Consist of a single-conductor tinned copper braided heating wire sandwiched in a pre-configured pattern between durable, two porous layers of fabric ​Operating Voltage: 240 V ​Maximum Continuous Exposure Temperature: 194°F (90°C) ​Heating Cable: Single wire with ground braid outer layer ​Cold Lead: 2-wire, 18 AWG plus ground braid layer; 10 ft (3m) length Documents Brochure Installation Instructions Mat Shower Installation Instructions List of material needed to install

Description ***Traditional hardwood is typically not recommended to be installed over an electric floor heating system because the repeated heating and cooling cycles may damage the wood. Standard Mats are the thinnest and easiest to install. Standard Mats are only 1/8” thick and eliminate the need to configure the heating wires during installation. Standard Mats come in various dimensions. Simply pick the size of the mat(s) that fits the desired heating area. Because the heating wire is embedded in the Standard Mat and does not need to be configured during installation, the heat coverage is guaranteed to be consistent throughout the desired heating area. Benefits Easy to install Error-Free Reduces installation time Does not raise floor height Comprehensive selection of sizes to choose from Nuheat is approved for installation under tile, stone, marble, laminate, engineered wood, and luxury vinyl flooring Technical Information ​Mat Dimension: 9'x4' Amperage: 3.6 amps Power Output: 432 watts Material: Consist of a single-conductor tinned copper braided heating wire sandwiched in a pre-configured pattern between durable, two porous layers of fabric ​Operating Voltage: 120 V ​Maximum Continuous Exposure Temperature: 194°F (90°C) ​Heating Cable: Single wire with ground braid outer layer ​Cold Lead: 2-wire, 18 AWG plus ground braid layer; 10 ft (3m) length Documents Brochure Installation Instructions Mat Shower Installation Instructions List of material needed to install

Description nVent Nuheat Cable is an easy-to-install electric floor heating system that combines installation versatility with advanced new technology. Choose the cable kit that is best suited for the size of the room/area and configure it on-site to provide floor heat in the desired areas of the room. Benefits Heats tile, stone, and laminate/engineered wood floors On-site flexibility Flexible wire spacing and heat output Compatible with nVent Nuheat Membrane Comprehensive selection of sizes to choose from Suitable for wet environments such as showers and steam rooms Redesigned, thinner cold-lead and factory splice New mid-point marker on the heating cable Technical Information Operating Voltage: 240 V Length: 80' Ampage: 0.9 amps Surface covering: 20 sq. ft. Power Output: 12 - 15 watts per square foot Maximum Ambient Temperature: 194°F (90°C) Material: Two single conductor Tefzel-coated resistance wires covered by a tin-plated copper braid and then coated with a durable copolymer (PVC) outer jacket Documents Brochure Installation Guide

Description ***Traditional hardwood is typically not recommended to be installed over an electric floor heating system because the repeated heating and cooling cycles may damage the wood. Standard Mats are the thinnest and easiest to install. Standard Mats are only 1/8” thick and eliminate the need to configure the heating wires during installation. Standard Mats come in various dimensions. Simply pick the size of the mat(s) that fits the desired heating area. Because the heating wire is embedded in the Standard Mat and does not need to be configured during installation, the heat coverage is guaranteed to be consistent throughout the desired heating area. Benefits Easy to install Error-Free Reduces installation time Does not raise floor height Comprehensive selection of sizes to choose from Nuheat is approved for installation under tile, stone, marble, laminate, engineered wood, and luxury vinyl flooring Technical Information Dimension: 5'x3.5' Amperage: 0.9 amps Power Output: 210 watts Material: Consist of a single-conductor tinned copper braided heating wire sandwiched in a pre-configured pattern between durable, two porous layers of fabric ​Operating Voltage: 240 V ​Maximum Continuous Exposure Temperature: 194°F (90°C) ​Heating Cable: Single wire with ground braid outer layer ​Cold Lead: 2-wire, 18 AWG plus ground braid layer; 10 ft (3m) length Documents Brochure Installation Instructions Mat Shower Installation Instructions List of material needed to install

Description ***Traditional hardwood is typically not recommended to be installed over an electric floor heating system because the repeated heating and cooling cycles may damage the wood. Standard Mats are the thinnest and easiest to install. Standard Mats are only 1/8” thick and eliminate the need to configure the heating wires during installation. Standard Mats come in various dimensions. Simply pick the size of the mat(s) that fits the desired heating area. Because the heating wire is embedded in the Standard Mat and does not need to be configured during installation, the heat coverage is guaranteed to be consistent throughout the desired heating area. Benefits Easy to install Error-Free Reduces installation time Does not raise floor height Comprehensive selection of sizes to choose from Nuheat is approved for installation under tile, stone, marble, laminate, engineered wood, and luxury vinyl flooring Technical Information Dimension: 5'x3' Amperage: 0.8 amps Power Output: 180 watts Material: Consist of a single-conductor tinned copper braided heating wire sandwiched in a pre-configured pattern between durable, two porous layers of fabric ​Operating Voltage: 240 V ​Maximum Continuous Exposure Temperature: 194°F (90°C) ​Heating Cable: Single wire with ground braid outer layer ​Cold Lead: 2-wire, 18 AWG plus ground braid layer; 10 ft (3m) length Documents Brochure Installation Instructions Mat Shower Installation Instructions List of material needed to install

Description ***Traditional hardwood is typically not recommended to be installed over an electric floor heating system because the repeated heating and cooling cycles may damage the wood. Standard Mats are the thinnest and easiest to install. Standard Mats are only 1/8” thick and eliminate the need to configure the heating wires during installation. Standard Mats come in various dimensions. Simply pick the size of the mat(s) that fits the desired heating area. Because the heating wire is embedded in the Standard Mat and does not need to be configured during installation, the heat coverage is guaranteed to be consistent throughout the desired heating area. Benefits Easy to install Error-Free Reduces installation time Does not raise floor height Comprehensive selection of sizes to choose from Nuheat is approved for installation under tile, stone, marble, laminate, engineered wood, and luxury vinyl flooring Technical Information ​Mat Dimension: 9' x 3' Amperage: 2.7 amps Power Output: 324 watts Material: Consist of a single-conductor tinned copper braided heating wire sandwiched in a pre-configured pattern between durable, two porous layers of fabric ​Operating Voltage: 120 V ​Maximum Continuous Exposure Temperature: 194°F (90°C) ​Heating Cable: Single wire with ground braid outer layer ​Cold Lead: 2-wire, 18 AWG plus ground braid layer; 10 ft (3m) length Documents Brochure Installation Instructions Mat Shower Installation Instructions List of material needed to install

Description ***Traditional hardwood is typically not recommended to be installed over an electric floor heating system because the repeated heating and cooling cycles may damage the wood. Standard Mats are the thinnest and easiest to install. Standard Mats are only 1/8” thick and eliminate the need to configure the heating wires during installation. Standard Mats come in various dimensions. Simply pick the size of the mat(s) that fits the desired heating area. Because the heating wire is embedded in the Standard Mat and does not need to be configured during installation, the heat coverage is guaranteed to be consistent throughout the desired heating area. Benefits Easy to install Error-Free Reduces installation time Does not raise floor height Comprehensive selection of sizes to choose from Nuheat is approved for installation under tile, stone, marble, laminate, engineered wood, and luxury vinyl flooring Technical Information ​Mat Dimension: 3'4" x 2'3" Amperage: 0.8 amps Power Output: 90 watts Material: Consist of a single-conductor tinned copper braided heating wire sandwiched in a pre-configured pattern between durable, two porous layers of fabric ​Operating Voltage: 120 V ​Maximum Continuous Exposure Temperature: 194°F (90°C) ​Heating Cable: Single wire with ground braid outer layer ​Cold Lead: 2-wire, 18 AWG plus ground braid layer; 10 ft (3m) length Documents Brochure Installation Instructions Mat Shower Installation Instructions List of material needed to install

Description ***Traditional hardwood is typically not recommended to be installed over an electric floor heating system because the repeated heating and cooling cycles may damage the wood. Standard Mats are the thinnest and easiest to install. Standard Mats are only 1/8” thick and eliminate the need to configure the heating wires during installation. Standard Mats come in various dimensions. Simply pick the size of the mat(s) that fits the desired heating area. Because the heating wire is embedded in the Standard Mat and does not need to be configured during installation, the heat coverage is guaranteed to be consistent throughout the desired heating area. Benefits Easy to install Error-Free Reduces installation time Does not raise floor height Comprehensive selection of sizes to choose from Nuheat is approved for installation under tile, stone, marble, laminate, engineered wood, and luxury vinyl flooring Technical Information ​Mat Dimension: 6'x3.5' Amperage: 2.1 amps Power Output: 252 watts Material: Consist of a single-conductor tinned copper braided heating wire sandwiched in a pre-configured pattern between durable, two porous layers of fabric ​Operating Voltage: 120 V ​Maximum Continuous Exposure Temperature: 194°F (90°C) ​Heating Cable: Single wire with ground braid outer layer ​Cold Lead: 2-wire, 18 AWG plus ground braid layer; 10 ft (3m) length Documents Brochure Installation Instructions Mat Shower Installation Instructions List of material needed to install

Description ***Traditional hardwood is typically not recommended to be installed over an electric floor heating system because the repeated heating and cooling cycles may damage the wood. Standard Mats are the thinnest and easiest to install. Standard Mats are only 1/8” thick and eliminate the need to configure the heating wires during installation. Standard Mats come in various dimensions. Simply pick the size of the mat(s) that fits the desired heating area. Because the heating wire is embedded in the Standard Mat and does not need to be configured during installation, the heat coverage is guaranteed to be consistent throughout the desired heating area. Benefits Easy to install Error-Free Reduces installation time Does not raise floor height Comprehensive selection of sizes to choose from Nuheat is approved for installation under tile, stone, marble, laminate, engineered wood, and luxury vinyl flooring Technical Information ​Mat Dimension: 8'x3' Amperage: 2.4 amps Power Output: 288 watts Material: Consist of a single-conductor tinned copper braided heating wire sandwiched in a pre-configured pattern between durable, two porous layers of fabric ​Operating Voltage: 120 V ​Maximum Continuous Exposure Temperature: 194°F (90°C) ​Heating Cable: Single wire with ground braid outer layer ​Cold Lead: 2-wire, 18 AWG plus ground braid layer; 10 ft (3m) length Documents Brochure Installation Instructions Mat Shower Installation Instructions List of material needed to install

Description 3M™ Wire Pulling Lubricant Gel is a translucent white polymer gel that is easy to handle and apply to wire and cable without runs or drips. The lubricant produces a low coefficient of friction that lessens the chance of cable jacket damage from high pulling forces. Not only does 3M™ Wire Pulling Lubricant Gel make wire pulling jobs smoother and safer, it also wipes off the cable quickly and cleanly before terminating or splicing. The consistent gel does not liquefy, or separate with hot or cold aging. It stays thick, smooth and ready to apply. The temperature use range is 20 degrees Fahrenheit (-6 degrees Celsius) to 110 degrees Fahrenheit (43 degrees Celsius) Features Wire pulling lubricant gel makes pulling jobs smoother and safer Low coefficient of friction means less wire damage and equipment wear for improved safety Thick formula applies faster without messy runs or drips, minimizing preparation time Colourless formula does not stain wire and cable jackets Compatibility with most wire and cable jackets enables varied applications Colourless formula does not stain wire and cable jackets Withstands a temperature range of 20 to 110 °F (-6.7 to 43 °C) UL Listed, CSA Certified and RoHS 2011/65/EU Compliant Technical Information Applications: Lubricant Brand: 3M™ Colour Family: White ETIM Class 8.0: EC002757 Lubricant Type: Gel Manufacturing Origin: USA Maximum Temperature (Celsius): 43.0 °C Maximum Temperature (Fahrenheit): 110.0 °F Minimum Temperature (Celsius): -6.7 °C Minimum Temperature (Fahrenheit): 20.0 °F Operating Temperature (Celsius): -5 to 43 Degree Celsius Operating Temperature (Fahrenheit): 20 to 110 Degree Fahrenheit Operating Temperature Range (Celsius): -5 °C to 49 °C Operating Temperature Range (Fahrenheit): 20 °F to 120 °F Product Colour: Translucent White Product Type: Gel RoHS EU Comments: RoHS 2011/65/EU compliant without exemption Tape Type: Barricade Temperature Range: 20 - 120 Degrees F (-5 - 49 Degrees C) Volume (Imperial): 1.0 qt Volume (metric): 0.95 L Document Safety Data Sheet

Description 3M™ ScotchCode™ Pre-Printed Wire Marker Books contain printed vinyl cloth wire and terminal markers with clearly printed letters, numbers, symbols, and industry-standard legends in black ink on a white background. The markers can withstand temperatures of 32 to 150 degrees Fahrenheit (0 to 66 degrees Celsius). The individual character markers that are bound in the bi-fold book are perforated in the center to minimize thickness on smaller gauge wires. This book includes 15 each of one to 30 numeric markers. Features Convenient and easy to use Suitable to mark electrical wires and terminal strips quickly Individual character markers bound in the bi-fold book, are perforated in the center to decrease thickness on smaller gauge wires Includes one pad of Post-It® Notes Pocket-sized RoHS 2011/65/EU Compliant‎ Black print on a white background highlights the characters Marker has a vinyl impregnated cloth film with a top coat and natural rubber adhesive Technical Information Adhesive Material: Natural Rubber Colour Family: White Disclaimer: Marker tapes are not intended for use as electrical insulation Kit Includes: 15 ea 1-30 Marker ID Style: Pre-printed Marker Size: 1.37 x 0.22 in (34,8 x 5,6 mm) Marker Type: Books Material: Vinyl Impregnated Cloth Film Maximum Cable Diameter (Imperial): 0.47 in Maximum Cable Diameter (Metric): 11.9 mm Maximum Operating Temperature (Celsius): 66.0 °C Maximum Operating Temperature (Fahrenheit): 150.0 °F Maximum Outside Diameter: 0.47 in (11,9 mm) Printed Text Type: Numbers Product Colour: White Product Type: Identification

Description 3M™ ScotchCode™ Wire Marker Tape Refill Roll is a polyester film tape that is printed with a letter for easy identification. It is ideal for marking all types of wire and cable including power, fibre optic, electronic and telecommunications. The tape has an acrylic, pressure-sensitive adhesive and withstands temperatures of -40 to 250 degrees Fahrenheit (-40 to 121 degrees Celsius). It is pre-printed with 6 letters for every inch and is ideal for phase identification on large or small gauge wire or cable and for automotive applications on tubing, hoses and replacement parts. This tape is also ideal for identification of terminal blocks/strips, wire in panel boards, or a piece of switchgear. This thin and conformable tape meets ASTM D-1000 standard test methods, making it great for industrial electrical applications. It is compatible with the 3M™ ScotchCode™ Tape Dispenser, and it is RoHS 2011/65/EU Compliant‎. Features Acrylic, pressure-sensitive adhesive ensures firm adhesion Comprised of thin, conformable polyester film Withstands temperatures of -18 to 302 °F (-28 to 150 °C) RoHS 2011/65/EU Compliant Printed with letter "M" Technical information Adhesive Material: Acrylic Colour Family: White Dispenser/Marker Type: Tape Roll Refill ETIM Class 8.0: EC001530 Marker ID Style: Pre-printed Marker Type: Dispenser Material: Plastic Maximum Insulation Outer Diameter (Metric): .7 mm Maximum Insulation Outside Diameter: 0.145 in Maximum Operating Temperature (Celsius): 121.0 °C Maximum Operating Temperature (Fahrenheit): 250.0 °F Maximum Recommended Voltage Rating: 600.0 V Overall Length (Metric): 2.4 m Overall Width (Metric): 5.46 mm Printed Text Type: Letter - M Product Type: Identification Refill: Tape Roll RoHS EU Comments: RoHS 2011/65/EU compliant without exemption Tape Colour: White UV Resistant: No

Description 3M™ ScotchCode™ Wire Marker Tape Refill Roll is a polyester film tape that is printed with a letter for easy identification. It is ideal for marking all types of wire and cable including power, fibre optic, electronic and telecommunications. The tape has an acrylic, pressure-sensitive adhesive and withstands temperatures of -40 to 250 degrees Fahrenheit (-40 to 121 degrees Celsius). It is pre-printed with 6 letters for every inch and is ideal for phase identification on large or small gauge wire or cable and for automotive applications on tubing, hoses and replacement parts. This tape is also ideal for identification of terminal blocks/strips, wire in panel boards, or a piece of switchgear. This thin and conformable tape meets ASTM D-1000 standard test methods, making it great for industrial electrical applications. It is compatible with the 3M™ ScotchCode™ Tape Dispenser, and it is RoHS 2011/65/EU Compliant‎. Features Acrylic, pressure-sensitive adhesive ensures firm adhesion Comprised of thin, conformable polyester film Withstands temperatures of -18 to 302 °F (-28 to 150 °C) RoHS 2011/65/EU Compliant Printed with letter "L" Technical information Adhesive Material: Acrylic Colour Family: White Dispenser/Marker Type: Tape Roll Refill ETIM Class 8.0: EC001530 Marker ID Style: Pre-printed Marker Type: Dispenser Material: Plastic Maximum Insulation Outer Diameter (Metric): .7 mm Maximum Insulation Outside Diameter: 0.145 in Maximum Operating Temperature (Celsius): 121.0 °C Maximum Operating Temperature (Fahrenheit): 250.0 °F Maximum Recommended Voltage Rating: 600.0 V Overall Length (Metric): 2.4 m Overall Width (Metric): 5.46 mm Printed Text Type: Letter - L Product Type: Identification Refill: Tape Roll RoHS EU Comments: RoHS 2011/65/EU compliant without exemption Tape Colour: White UV Resistant: No

Description The 3M™ Fire Barrier Sealant is an economical alternative to firestopping applications. It is used to firestop metal pipes or cables through concrete or gypsum, and for use in dynamic head-of-wall systems. A single-part, sag-resistant, water-based acrylic latex sealant, 3M™ Fire Barrier Sealant 150+ has excellent adhesion characteristics to most common construction materials. In addition, since it dries to the touch within one hour, it can be painted for a more professional-looking job. Features Remains pliable allowing for typical pipe movement Water-based for easy installation, cleanup and disposal Endothermic fillers absorb heat and release water High-solids formula means limited shrinkage No solvents Available in three colours for easy identification or integration with substrate Multi-viscosity grade offers excellent sealant properties Technical Information Colour Family: Grey Fire Rating: 4 Hour Hardness: 60 Shore A Movement Capability: 19% Product Type: Sealant Smoke Seal: Yes Sound Barrier: 56 in 56 Volume (Imperial): 10.1 fl oz Volume (metric): 300.0 mL Water-tight: No Document Safety Data sheet

Description 3M™ Multi-Purpose Duct Tape 3900 is an industrial-strength tape that gives you a variety of colours for identification, contrast, decoration, bundling, sealing, holding, protecting and other tough jobs. It is also used to colour code bundles of pipes and conduit, call attention to temporary repairs, secure carpet and wiring to floors and provide attractive seals on coloured surfaces. Features Water-resistant backing seals and protects against humidity and moisture High tensile strength cloth scrim Technical Information Adhesive Type: Rubber Backing (Carrier) Material: Polyethylene/Cloth Scrim Backing Material: Polyethylene over cloth scrim Elongation at Break: 21.0 % Indoor/Outdoor: Indoor/Outdoor Maximum Operating Temperature (Celsius): 93.0 °C Maximum Operating Temperature (Fahrenheit): 200.0 °F Overall Length (Imperial): 60.0 yd Overall Length (Metric): 54.8 m Overall Width (Imperial): 1.88 in Overall Width (Metric): 48.0 mm Product Category: Masking and Duct Tapes Product Colour: Olive Regulatory Key: AD-00830 Tensile Strength (Imperial): 32.0 lb/in Tensile Strength (metric): 560.0 none Total Tape Thickness without Liner (Imperial): 8.1 mil Total Tape Thickness without Liner (metric): 0.19 mm

Description 3M™ Scotch-Seal™ Mastic Tape 2229 is a UV resistant tape that features a rubber backing and has good self-healing properties after being cut or punctured. The tacky mastic adhesive of the pad adheres over irregular surfaces to provide excellent moisture resistance. It maintains its stability over a wide temperature range and offers good adhesion to metals, rubbers, synthetic cable insulations, and jackets. It also provides corrosion protection to a variety of electrical connections, sealing ducts, and cable end seals. RoHS 2011/65/EU Compliant. Features Tacky mastic adhesive provides excellent adhesion over irregular surfaces For insulating electrical connections rated up to 1000 volts if over wrapped with vinyl or rubber electrical tape Also used for sealing high-voltage cable splice and termination accessories for 90° C continuous operating temperature Easy release liner Withstands temperatures up to 194°F (90°C) Technical Information Adhesive Type: Mastic Application Method: Apply by hand Application Temperature To (Celsius): 38.0 °C Backing (Carrier) Thickness (Metric): 3.18 mm Backing Thickness (Imperial): 125.0 mil Brand: Scotch-Seal™ Colour Family: Black ETIM Class 8.0: EC000128 Maximum Operating Temperature (Celsius): 90.0 °C Maximum Operating Temperature (Fahrenheit): 100.0 °F Overall Length (Imperial): 10.0 ft Overall Length (Metric): 3.0 m Overall Thickness (Imperial): 125.0 mil Overall Thickness (Metric): 3.18 mm Overall Width (Imperial): 3.75 in Overall Width (Metric): 95.3 mm Product Type: Mastic tape RoHS EU Comments: RoHS 2011/65/EU compliant without exemption Tape Grade: Premium Tape Thickness (Imperial): 3.18 mm Tape Width (metric): 95.0 mm Total Tape Thickness without Liner (Imperial): 125.0 mil Total Tape Thickness without Liner (metric): 3.18 mm UV Resistant: Yes

Description The Leviton Smart Wall Switch Occupancy Sensor (ODS15-Ixx) uses Passive Infrared (PIR) detection technology to monitor a room for occupancy using a segmented, tamper resistant lens. When a person passes in or out of a sensor zone, the sensor detects motion and switches the lights ON. The lights will remain ON as long as an occupant is moving through the sensor zones. The ODS15-I1W ’s vacancy mode features a Manual-ON/Auto-OFF for installations where manual-ON switching is required for energy code applications. A “minor motion” zone detects small body movements allowing the lights to stay ON even though a person may not be moving or walking around the room. The “major motion” zone, exhibits a lesser degree of sensitivity and requires larger movements. Configuration of ODS15-I1W is made using the Leviton Smart Sensor App from a smartphone or other Bluetooth® enabled Android or iOS device. Simple configuration can also be applied using pushbutton setup for several popular preconfigured options. Benefits Can be used to comply with IECC, ASHRAE 90.1, and 2019 Title 24, Part 6 occupancy/vacancy sensing and manual control requirements Fits in a standard wall box and gangable with other units Controls General Purpose plug loads up to 20A and LED lighting loads up to 10A One relay module for single-level switching 180° field-of-view provides approximately 1,100 square feet of coverage Maximum sensing distance in front of the sensor is 30-40 feet and 15-20 feet on either side Advanced configuration can be performed using the Leviton Smart Sensor App on any Bluetooth enabled Android or iOS device: Set operating mode to Auto-ON/Auto-OFF or Manual-ON/Auto-OFF Adjust the sensitivity of the sensor to increase or decrease coverage area Adjust timeouts Activate the nightlight and select nightlight colors Add daylighting hold-off and select target daylighting levels Set a security code to lock configuration settings Out-of-the-box configuration default mode: Auto-ON/Auto-OFF with 10-minute time out Sensitivity set to 75% Nightlight and daylighting disabled Technical Information Color: White Coverage (Sq.Ft.): 1000 Grade: Commercial Mounting Type: Wall Switch Product Line: ODS15 Sensor Type: Occupancy / Vacancy Technology: Passive Infrared Frequency: 60Hz Voltage: 120 VAC Neutral Wire Connection: Required Switch Type: Single-Pole Wallplate: Non-included Document Data Sheet Quick Start Guide for the Smart Sensor App Installation guide

Description Ideal Industries Thin-Wall Thermo-Shrink heat shrinkable tubing. Roll of 4' long 1" diameter. Suitable for cable range 2/0 MCM - 500 MCM. Benefits Polyolefin material electrically insulates and protects in-line components, disconnect terminals and splices with its high strength and excellent resilience Use to bundle wires for very flexible light-duty harnesses Highly flame-retardant and flexible; resistant to common fluids and solvents Meets UL 486D 125°C VW-1 600V; Material: No PBB’s, PBBE’s, conforms to ROHS 2:1 shrink ratio; Minimum shrink temperature: 70°C; Operating temperature: -55°C to +125°C RoHS compliant UV resistant Technical Information Normal Size: 1" Expanded I.D. (Min.) 1.043"/26.5mm Nominal Recovered I.D. (Max.): 0.500"/12.7mm Recovered Wall Thickness +/- 10%: 0.031"/0.80mm Max. Cable Range: 500 MCM Min. Cable Range: 2/0 MCM Heat Shrink Length: 4 ft. Heat Shrink Type: Thin-Wall

Description Ideal Industries Thin-Wall Thermo-Shrink heat shrinkable tubing. Roll of 4' long 3/4" diameter. Suitable for cable range 2 AWG to 250 MCM Benefits Polyolefin material electrically insulates and protects in-line components, disconnect terminals and splices with its high strength and excellent resilience Use to bundle wires for very flexible light-duty harnesses Highly flame-retardant and flexible; resistant to common fluids and solvents Meets UL 486D 125°C VW-1 600V; Material: No PBB’s, PBBE’s, conforms to ROHS 2:1 shrink ratio; Minimum shrink temperature: 70°C; Operating temperature: -55°C to +125°C RoHS compliant UV resistant Technical Information Normal Size: 3/4" Expanded I.D. (Min.) 0.807"/20.5mm Nominal Recovered I.D. (Max.): 0.374"/9.5mm Recovered Wall Thickness +/- 10%: 0.027"/0.69mm Max. Cable Range: 250MCM Min. Cable Range: 2 AWG Heat Shrink Length: 4 ft. Heat Shrink Type: Thin-Wall

Description Ideal Industries Thin-Wall Thermo-Shrink heat shrinkable tubing. Roll of 4' long 1/2" diameter. Suitable for cable range 4 AWG to 1 AWG Benefits Polyolefin material electrically insulates and protects in-line components, disconnect terminals and splices with its high strength and excellent resilience Use to bundle wires for very flexible light-duty harnesses Highly flame-retardant and flexible; resistant to common fluids and solvents Meets UL 486D 125°C VW-1 600V; Material: No PBB’s, PBBE’s, conforms to ROHS 2:1 shrink ratio; Minimum shrink temperature: 70°C; Operating temperature: -55°C to +125°C RoHS compliant UV resistant Technical Information Normal Size: 1/2" Expanded I.D. (Min.) 0.539"/13.7mm Nominal Recovered I.D. (Max.): 0.252"/6.4mm Recovered Wall Thickness +/- 10%: 0.026"/0.65mm Max. Cable Range: 1 AWG Min. Cable Range: 4 AWG Heat Shrink Length: 4 ft. Heat Shrink Type: Thin-Wall