Hand Tools

Description This Punch Set can punch clean and accurate holes in electrical panels. The 3/4-Inch 3-piece set can punch up to 10-gauge mild steel. It can also cut through aluminum, fiberglass, and plastic. Features Punch Set optimized design reduces wrench effort Slugs are split inside for easy removal Maximum capacity of 10 gauge mild steel. Also cuts aluminum, fiberglass and plastic Punches holes cleanly and accurately Set includes 3/4-Inch (19 mm) punch and die with draw stud Technical Information Conduit Sizes: 0.75'' (1.9 cm) Overall Length: 4'' (10.2 cm)

Description Designed for optimal set-up and slug removal speed. For use in hydraulic drivers, punch and die are required for operation. Draw stud's flat end designed to guide punch for faster thread engagement. Features Rated for mild and stainless steel Self-centering punch aligns itself on pilot hole No need to draw crosshairs or line up die alignment marks Bearing has electrogalvanized zinc-plate finish

Description For use in hydraulic drivers. Punch and die are required for operation. Draw stud's flat end designed to guide punch for faster thread engagement. Features Designed for optimal set-up and slug removal speed Rated for mild and stainless steel Self-centering punch aligns itself on pilot hole No need to draw crosshairs or line up die alignment marks Bearing has electrogalvanized zinc-plate finish Technical Information Overall Length: 1'' (2.5 cm) Overall Height: 2.625'' (6.7 cm) Overall Width: 1'' (2.5 cm)

Description Wrench has a chrome-plated finish. Box wrenches with a ratcheting mechanism allow for more efficient tightening and loosening. Since 1857, Klein Tools has manufactured the world's finest hand tools. Features High-quality construction for a longer tool life Chrome-plated finish for added durability Ratcheting mechanism for more efficient tightening and loosening Klein offers a lifetime warranty on material defects and workmanship for the normal life of the product Technical Information Overall Length: 12.25'' (31.1 cm) Overall Width: 1.906'' (4.8 cm)

Description Easily punch holes for 2-Inch EMT conduit. Has a maximum capacity of 10 gauge mild steel. Cuts aluminum, fiberglass and plastic as well. Features Maximum capacity of 10 gauge mild steel Also cuts aluminum, fiberglass and plastic Punches holes cleanly and accurately Black oxide finish Technical Information Overall Length: 2.813'' (7.2 cm) Overall Height: 1.188'' (3 cm) Overall Width: 2.813'' (7.2 cm)

Description Easily punch holes for 1-1/2-Inch EMT conduit. Has a maximum capacity of 10 gauge mild steel. Cuts aluminum, fiberglass and plastic as well. Features Maximum capacity of 10 gauge mild steel Also cuts aluminum, fiberglass and plastic Punch holes cleanly and accurately Black oxide finish

Description Easily punch holes for1-1/4-Inch EMT conduit. Has a maximum capacity of 10 gauge mild steel. Cuts aluminum, fiberglass and plastic. Features Maximum capacity of 10 gauge mild steel Also cuts aluminum, fiberglass and plastic Punch holes cleanly and accurately Black oxide finish

Description Easily punch holes for 3/4-Inch EMT conduit. Has a maximum capacity of 10 gauge mild steel. Cuts aluminum, fiberglass and plastic. Features Maximum capacity of 10 gauge mild steel Also cuts aluminum, fiberglass and plastic Punches holes cleanly and accurately Black oxide finish

Description The 7/8-Inch Knockout Die easily punches holes for 1/2-Inch EMT conduit. The optimized design reduces wrench effort. Slugs are split inside for easy removal. Cuts aluminum, fiberglass and plastic as well. Features It has a maximum capacity of 10 gauge mild steel Also cuts aluminum, fiberglass and plastic Punches holes cleanly and accurately Black oxide finish Technical Information Overall Length: 1.109'' (2.8 cm) Overall Height: 0.75'' (1.9 cm) Overall Width: 1.109'' (2.8 cm)

Description The 2.416-Inch Knockout Punch easily punches holes for 2-Inch conduit. It offers an optimized design that reduces wrench effort. Slugs are split inside for easy removal. Cuts aluminum, fiberglass and plastic as well. Features Maximum capacity of 10 gauge mild steel Also cuts aluminum, fiberglass and plastic Punches holes cleanly and accurately Black oxide finish Technical Information Overall Length: 2.406'' (6.1 cm) Overall Height: 1.343'' (3.4 cm) Overall Width: 2.406'' (6.1 cm)

Description Easily punch holes for1-1/2-Inch EMT conduit. Has a maximum capacity of 10 gauge mild steel. Cuts aluminum, fiberglass and plastic as well. Optimized design reduces wrench effort. Slugs are split inside for easy removal. Features Maximum capacity of 10 gauge mild steel Also cuts aluminum, fiberglass and plastic Punches holes cleanly and accurately Black oxide finish

Description Easily punch holes for 1-1/4-Inch EMT conduit. Has a maximum capacity of 10 gauge mild steel. The optimized design reduces wrench effort. Slugs are split inside for easy removal. Features Maximum capacity of 10 gauge mild steel Also cuts aluminum, fiberglass and plastic Punches holes cleanly and accurately Black oxide finish Conduit size stamped on the punch Optimized design reduces wrench effort Slugs are split inside for easy removal

Description Easily punch holes for 1-Inch EMT conduit. Has a maximum capacity of 10 gauge mild steel. Cuts aluminum, fiberglass and plastic. The optimized design reduces wrench effort. Slugs are split inside for easy removal. Features Maximum capacity of 10 gauge mild steel Also cuts aluminum, fiberglass and plastic Punches holes cleanly and accurately Black oxide finish Technical Information Overall Length: 1.094'' (2.8 cm) Overall Height: 0.75'' (1.9 cm) Overall Width: 1.094'' (2.8 cm)

Description Easily punch holes for 3/4-Inch EMT conduit. Has a maximum capacity of 10 gauge mild steel. Cuts aluminum, fiberglass and plastic. The optimized design that reduces wrench effort. Slugs are split inside for easy removal. Features Maximum capacity of 10 gauge mild steel Also cuts aluminum, fiberglass and plastic Punches holes cleanly and accurately Black oxide finish Technical Information Overall Length: 1.094'' (2.8 cm) Overall Height: 0.75'' (1.9 cm) Overall Width: 1.094'' (2.8 cm)

Description The 7/8-Inch Knockout Punch easily punches holes for 1/2-Inch EMT conduit. The optimized design reduces wrench effort. Slugs are split inside for easy removal. Cuts aluminum, fiberglass and plastic as well. Features Maximum capacity of 10 gauge mild steel Also cuts aluminum, fiberglass and plastic Punches holes cleanly and accurately Black oxide finish Technical Information Overall Length: 0.891'' (2.3 cm) Overall Height: 0.875'' (2.2 cm) Overall Width: 0.891'' (2.3 cm)

Description The IDEAL Made in the U.S.A. 12" Adjustable Wrenches use a forged-steel construction, which provides extra strength and hardness without sacrificing flexibility. It is one of the reasons our tools out-perform the competition in performance and durability. Features Forged steel construction with narrow profile head reaches into tight spaces Tight tolerances on thumbscrew will not loosen or wobble with use Extra wide jaw capacity with standard and metric markings Document Catalogue

Description The IDEAL Made in the U.S.A. 10" Adjustable Wrenches use a forged-steel construction, which provides extra strength and hardness without sacrificing flexibility. It is one of the reasons our tools out-perform the competition in performance and durability. Features Forged steel construction with narrow profile head reaches into tight spaces Tight tolerances on thumbscrew will not loosen or wobble with use Extra wide jaw capacity with standard and metric markings Document Catalogue

Description The IDEAL Made in the U.S.A. 8" Adjustable Wrenches use a forged-steel construction, which provides extra strength and hardness without sacrificing flexibility. It is one of the reasons our tools out-perform the competition in performance and durability. Features Forged steel construction with narrow profile head reaches into tight spaces Tight tolerances on thumbscrew will not loosen or wobble with use Extra wide jaw capacity with standard and metric markings Document Catalogue

Description The IDEAL Made in the U.S.A. 6 " Adjustable Wrenches use a forged-steel construction, which provides extra strength and hardness without sacrificing flexibility. It is one of the reasons our tools out-perform the competition in performance and durability. Features Forged steel construction with narrow profile head reaches into tight spaces Tight tolerances on thumbscrew will not loosen or wobble with use Extra wide jaw capacity with standard and metric markings Document Catalogue

Description The IDEAL Insulated Cable Cutter features a drop-forged, high carbon steel construction. The precision-ground, hardened cutting edges provide accurate cuts without cable distortion. This tool is designed for maximum leverage with less effort, and can cut 2/0 copper and 4/0 aluminum cables. It meets ASTM F1505-01, IEC 60 900 standards and OSHA requirements for insulated tools (29 CFR 1910). Cutter is UL listed and 1000 Volt certified (1000V AC, 1500V DC). Features Precision ground, by-pass cutter blades provide smooth, easy cuts up to 2/0 copper or aluminum. Dual-layer injection molded grips provide 1000V protection from electrical shock UL logo on every plier validates each tool is individually hot tested and approved prior to shipping Meets or exceeds ASTM standards Leopard-spot pattern, molded into the textured grip for improved control Grips are impervious to gas, oil, and hydraulic fluid Document Catalogue

Description The Insulated Multi-Crimp Tool crimps bare or insulated terminals and splices on 10 to 22 AWG wire. Its knife-to-anvil blades never need resharpening! They are made from drop-forged, high carbon steel, and give great leverage for easy crimping and cutting. Meets ASTM F1505-01 and IEC 60 900 standards. Also meets OSHA requirements for insulated tools (29 CFR 1910). Features Cuts, crimps and splices 10-22 AWG wires for insulated and non-insulated crimp connectors Dual-layer injection molded grips provide 1000V protection from electrical shock UL logo on every plier validates each tool is individually hot tested and approved prior to shipping Meets or exceeds ASTM standards Leopard-spot pattern, molded into the textured grip for improved control Grips are impervious to gas, oil, and hydraulic fluid Document Catalogue

Description The Insulated Tongue and Groove Pliers are constructed of drop-forged, high-carbon steel, made to withstand the toughest of applications. The tongue and groove design is patented and ensures a solid grip. The pliers’ reinforced flange protects against breakage, and the teeth are laser-hardened to remain sharp for long time. It meets ASTM F1505-01, IEC 60 900 standards and OSHA requirements for insulated tools (29 CFR 1910). Cutter is UL listed and 1000 Volt certified (1000V AC, 1500V DC). Features Dual-layer injection molded grips provide 1000V protection from electrical shock UL logo on every plier validates each tool is individually hot tested and approved prior to shipping Meets or exceeds ASTM standards Leopard-spot pattern, molded into the textured grip for improved control Grips are impervious to gas, oil, and hydraulic fluid Flush-ground rivets provide greater access into tight spaces and never loosen up Document Catalogue

Description The Insulated Long-Nose Pliers are constructed of durable corrosion resistant drop-forged, high-carbon steel. They are designed with narrow profile heads, making them great for working in tight areas! These pliers have serrated jaws to provide a secure gripping surface, and their knife-to-anvil blades never need resharpening. Induction hardened blades are suitable for cutting hardened wire, bolts and ASCR. Pliers meets ASTM F1505-01, IEC 60 900 standards and OSHA requirements for insulated tools. Cutter is UL listed and CSA certified. Features Dual-layer injection molded grips provide 1000V protection from electrical shock UL logo on every plier validates each tool is individually hot tested and approved prior to shipping Meets or exceeds ASTM standards Leopard-spot pattern, molded into the textured grip for improved control Grips are impervious to gas, oil, and hydraulic fluid Narrow profile head for working in tight spaces. Document Catalogue

Description The Insulated Linesman Pliers are ideal for cutting hardened wire, bolts and ACSR, and can crimp bare and insulated terminals. The pliers are 9-1/4 in. long, and are made of drop-forged high carbon steel that withstands the toughest of applications. It features induction-hardened blades and serrated jaws that provide long-term durability and the high-leverage design offers 40% more cutting power. It meets OSHA requirements for insulated tools, ASTM F1505-01 and IEC 60 900 standards. Features Feature knife-to-knife cutting blades, high leverage pivots, cam-action fish tape puller and dual crimp dies. Dual-layer injection molded grips provide 1000V protection from electrical shock UL logo on every plier validates each tool is individually hot tested and approved prior to shipping meets or exceeds ASTM standards L eopard-spot pattern, molded into the textured grip for improved control Grips are impervious to gas, oil, and hydraulic fluid Document Catalogue

Description The Insulated Diagonal-Cutting Pliers are constructed of drop-forged, high-carbon steel, made to withstand the toughest of applications. They are suitable for cutting wire, bolts and ACSR. The high-leverage design provides 40% more cutting power. These pliers feature a convenient angled head for hard-to-reach areas and rocking out nails, and the knife-to-anvil blades never need resharpening! The Insulate Diagonal-Cutting Pliers meet ASTM F1505-01, IEC 60 900 standards and OSHA requirements for insulated tools (29 CFR 1910). Cutter is UL listed and 1000 Volt certified (1000V AC, 1500V DC). Features Straight handle Smart-Grip™ model features an integral spring which can be deployed or stored as needed. Angled head model is shaped for optimum staple pulling leverage Feature knife-to-knife cutting blades, high leverage pivots, cam-action fish tape puller and dual crimp dies. Dual-layer injection molded grips provide 1000V protection from electrical shock UL logo on every plier validates each tool is individually hot tested and approved prior to shipping meets or exceeds ASTM standards L eopard-spot pattern, molded into the textured grip for improved control Grips are impervious to gas, oil, and hydraulic fluid Document Catalogue

Description These Tongue & Groove 9-1/2" Pliers has a Heavy duty textured PVC grips that provide superior comfort and improved grip for everyday commercial use. The durable dipped grips bond to the steel plier handles during our proprietary immersion gripping process. Features Flush-ground rivets provide greater access into tight spaces and never loosen up Heavy-duty, textured grip Excellent fit, form, and functionality Dipped hot for uniform shape, optimum adhesion and perfect form Reinforced flange protects against breakage Drop-forged, high-carbon steel construction Document Catalogue

Description These Tongue & Groove 7" Pliers has a Heavy duty textured PVC grips that provide superior comfort and improved grip for everyday commercial use. The durable dipped grips bond to the steel plier handles during our proprietary immersion gripping process. Features Flush-ground rivets provide greater access into tight spaces and never loosen up Heavy-duty, textured grip Excellent fit, form, and functionality Dipped hot for uniform shape, optimum adhesion and perfect form Reinforced flange protects against breakage Drop-forged, high-carbon steel construction Document Catalogue

Description These Tongue & Groove 12" Pliers has a Heavy duty textured PVC grips that provide superior comfort and improved grip for everyday commercial use. The durable dipped grips bond to the steel plier handles during our proprietary immersion gripping process. Features Flush-ground rivets provide greater access into tight spaces and never loosen up Heavy-duty, textured grip Excellent fit, form, and functionality Dipped hot for uniform shape, optimum adhesion and perfect form Reinforced flange protects against breakage Drop-forged, high-carbon steel construction Document Catalogue

Description These 8" Slip-Joint Pliers are perfect for quick installation and removal of spring-tension hose clamps. These pliers grip with either end or side of jaws, and feature a flush rivet making them perfect for working in confined areas. Features Heavy-duty, textured grip Excellent fit, form, and functionality Dipped hot for uniform shape, optimum adhesion and perfect form Two position slip joints fit large and small jobs Dipped comfort-grip handles for a secure grip Flush rivet

Description These 6" Slip-Joint Pliers are perfect for quick installation and removal of spring-tension hose clamps. These pliers grip with either end or side of jaws, and feature a flush rivet making them perfect for working in confined areas. Features Heavy-duty, textured grip Excellent fit, form, and functionality Dipped hot for uniform shape, optimum adhesion and perfect form Two position slip joints fit large and small jobs Dipped comfort-grip handles for a secure grip Flush rivet

Description These Ideal 8-1/2" Long-Nose Pliers with Cutter has a heavy duty textured PVC grips provide superior comfort and improved grip for everyday commercial use. The durable dipped grips bond to the steel plier handles during our proprietary immersion gripping process. Narrow profile head for working in tight spaces Features Heavy-duty, textured grip Excellent fit, form, and functionality Dipped hot for uniform shape, optimum adhesion and perfect form Narrow profile head designed for working in tight areas Serrated jaws provide secure gripping surface Drop-forged, high-carbon steel construction Knife-to-anvil blades provide excellent cutting performance Laser-hardened blades cut hardened wire, bolts and stainless steel wire Document Catalogue

Description These Ideal 9-1/2" Linesman Pliers have heavy duty textured PVC grips that provide superior comfort and improved grip for everyday commercial use. The durable dipped grips bond to the steel plier handles during our proprietary immersion gripping process. Features Knife-to-knife blades rarely need resharpening Cuts hardened wire, bolts and stainless steel wire Heavy-duty, textured grip Excellent fit, form, and functionality Dipped hot for uniform shape, optimum adhesion and perfect form Document Catalogue

Description These Ideal 8" Diagonal-Cutting Pliers with Angled Head have heavy duty textured PVC grips that provide superior comfort and improved grip for everyday commercial use. The durable dipped grips bond to the steel plier handles during our proprietary immersion gripping process. Features Knife-to-Knife blades provide excellent cutting performance High-leverage design provides more cutting power Features a convenient angled head for hard-to-reach areas and rocking out nails Heavy-duty, textured grip Excellent fit, form, and functionality Dipped hot for uniform shape, optimum adhesion and perfect form Document Catalogue

Description These Ideal 8" Diagonal-Cutting Pliers have heavy duty textured PVC grips that provide superior comfort and improved grip for everyday commercial use. The durable dipped grips bond to the steel plier handles during our proprietary immersion gripping process. Features Knife-to-Knife blades provide excellent cutting performance High-leverage design provides more cutting power Heavy-duty, textured grip Excellent fit, form, and functionality Dipped hot for uniform shape, optimum adhesion and perfect form Document Catalogue

Description This ratcheting cable cutter will cut hard drawn copper up to 400 MCM and soft copper, aluminum, multiple conductor cable cuts of up to 600 MCM. It features a durable hardened steel rounded blade construction to ensure consistent cuts and minimizes cable distortion. Cutter has dual durometer covered, ergonomic, non-slip handle grips and a locking mechanism for easy storage. It has ratcheting jaw with maximum jaw opening of 1.375 inches. **Not for cutting steel or ACSR Features Cuts hard drawn copper up to 400 KCMIL (MCM) and soft copper, aluminum and multiple conductor cable up to 600 KCMIL (MCM) Hardened steel blades ensure consistent cuts and long-term durability Rounded blade design minimizes cable distortion during cutting Quick release mechanism simplifies blade back out Locking mechanism keeps handles closed for easy storage Document Catalogue

Description The IDEAL 35-056 BigFoot Ratcheting Cable Cutter is a large cable cutter, capable of cutting up to 400 KCMIL (MCM) as well as copper and aluminum. With handles that lock for safe storage and are curved for ease of use, this is a well made tool able to make clean, non-distorted cuts. *This ratchet is not for use with steel or ACSR cable. Features The BigFoot ™ Cable Cutter is designed to cut 750 KCMIL (MCM) and smaller hard-drawn copper and aluminum cables Molded-in foot provides stability and leverage when making multiple cuts Hardened steel blades ensure consistent cuts and long-term durability Rounded blade design minimizes cable distortion during cutting Quick release mechanism simplifies blade back-out Locking mechanism keeps handles closed for easy storage Document Catalogue