Dimmers & Switches

Description The Lutron Maestro LED+ Motion Sensor Dimmer Switch works just like a Lutron Maestro dimmer, with the addition of Lutron’s advanced motion sensing technology to automatically and gradually turn the lights on and off. The LED+ Motion Sensor Dimmer Switch is rated for 150W dimmable LED or 600W Incandescent/Halogen bulbs. Install in a single pole, 3-way with existing switch, or with Maestro companion dimmers (MA-R/MSC-AD) to dim from up to 9 locations. Use the raise/lower buttons to adjust the brightness for any activity or determine the preset level to ensure lights always turn on to your desired light level. The passive infrared (PIR) sensor, covered by a tamper resistant lens, detects heat from occupants moving and has a 180-degree field of view (900 sq ft major motion & 400 sq ft minor motion coverage). Equipped with smart ambient light detection (ALD), you can customize your sensing dimmer to detect daylight, so lights don't turn on when enough natural light is present in the room. Unlike other manufacturers, Lutron sensors use Cross Correlation Technology (XCT) to also detect fine motion, such as typing at a desk or reading a book – ensuring lights won’t turn off inadvertently when you’re still in the room. Easy button programming is available to customize both the dimmer and the sensor’s functions, such as timeout, occupied level and sensor mode. Lutron sensors have an adjustable timeout (1, 5, 15 or 30 minutes) to control how long the lights stay on after leaving the room. The occupied level is the brightness the sensor will turn on when motion is detected. Change the sensor to vacancy mode to meet Title 24 requirements: lights only turn on with a manual press of the tap switch but automatically turn off if the sensor no longer detects motion. Available in 10+ colors. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately). Features Includes (1) Maestro LED+ Motion Sensor Dimmer Switch; Gloss Finish, Clamshell Packaging Rated for 150W dimmable LED or 600W Incandescent/Halogen bulbs; No Neutral or Ground required Screw Terminal or Push-in Installation; 120V Single Pole/Multi-location dimming with Lutron Maestro Companion dimmers (MA-R); compatible with an existing 3-way switch Features passive infrared (PIR) motion detection with exclusive Lutron XCT Technology for fine motion detection, which is 2-3x better at picking up motion than other manufacturers 180-degree sensor field of view (900 sq ft major motion & 400 sq ft minor motion coverage); Tamper-resistant lens Easy button programming mode available to customize dimmer and sensor functions such as timeout, occupied light level, and sensor mode Complies with Title 20/24 Section 110.9 for “automatic shutoff” Smart Ambient Light Detection (ALD) can be programmed so lights stay off if enough light is present in the room Document Spec sheet Instruction

Description The Diva 0-10V dimmer switch is a simple solution is designed to match existing design style switches and accessories. Easily turn the lights on and off with a paddle switch, and use the slide control to adjust the lights to the perfect level. The new Diva 0 - 10-Volt dimmer switch is a 0-10 VDC dimmer with 3-way functionality for 3rd party 0-10-Volt fixtures (LED and fluorescent), Power Pack (PP-DV) required. Coordinating wall plate and required Power Pack sold separately. Features For use in controlling 0-10-Volt LED drivers and/or fluorescent ballasts Separate Power Pack (PP-DV) required for dimmer; Power Pack requires Neutral. Large paddle switch with a captive linear-slide control for a standard designer-opening wall plate Can be used in single pole or 3-way applications Easily replaces existing switch and installs in as little as 15 minutes Includes (1) Diva 0-10V dimmer switch; coordinating wall plate and required Power Pack (PP-DV) sold separately Document Installation Manual Spec Sheet

Description The Diva 250-Watt LED+ dimmer switch works with dimmable LED and CFL screw-in bulbs up to 250-Watt and is also compatible with up to 600-Watt of standard incandescent and halogen bulbs, allowing you to control all 4 bulb types on the same circuit. It is designed to control a broad range of dimmable LED and CFL bulbs from a variety of brands including Philips, Cree, GE, EcoSmart and Lighting Science. With the same features as Lutron's Diva dimmer switch, the large paddle switch turns the light on/off and returns to your favorite setting. The discreet slider adjusts the light level to suit any activity. Coordinating Claro wall plate sold separately. Controls 250 W dimmable LED/CFL (screw-base), 600 W incandescent/halogen or 350 W Hi-Lume 1 percent 2-wire LED driver loads. Paddle turns on/off. Slide up to brighten, down to dim. Provides reliable dimming of dimmable LEDs/CFLs, as well as halogens and incandescents. Features Tested on 1,000s of bulbs and dozens of brands for flicker-free dimming. Provides over 250 lighting levels so you can create the perfect light for any activity Works with up to 250 Watts of dimmable LED/CFL bulbs or 600 Watts of Incandescent/Halogen bulbs Lutron patented technology to optimize the dim range of your bulb and prevent interference with other dimmers in the home Can be used in single-pole or 3-Way applications with a mechanical switch. Rocker switch turns lights on/off to favorite light level. Discreet slider dims and brightens the lights Installs in as little as 15 minutes in homes of all ages – NO NEUTRAL REQUIRED Includes (1) Diva LED+ (formerly C.L) Dimmer Switch; coordinating wallplate sold separately Document Installation Manual Spec Sheet

Description The Diva LED+ dimmer switch provides optimal dimming performance of LED bulbs. This dimmer switch works with up to 150-Watt of dimmable LED/CFL or 600-Watt of incandescent/halogen, allowing you to control multiple bulb types on the same circuit. It is designed to control a broad range of dimmable LED and CFL bulbs from a variety of brands including Philips, Cree, GE, EcoSmart and Lighting Science. The Diva dimmer switch features a paddle switch to turn your lights off or on returning the lights to your favorite level. This dimmer switch also features a discreet slide control next to the switch, allowing you to adjust the lights for any activity. Coordinating Claro wall plate sold separately. Features Tested on 1,000s of bulbs and dozens of brands for flicker-free dimming. Provides over 250 lighting levels so you can create the perfect light for any activity Works with up to 150-Watt of dimmable LED/CFL bulbs or 600-Watt of incandescent/halogen bulbs Lutron patented technology to optimize the dim range of your bulb and prevent interference with other dimmers in the home Can be used in single-pole or 3-Way applications with a mechanical switch. Rocker switch turns lights on/off to favorite light level. Discreet slider dims and brightens the lights Installs in as little as 15 minutes in homes of all ages – NO NEUTRAL REQUIRED Document Installation Manual Specification sheet

Description Similar to the T100 Series, these time switches can also handle electrical loads up to 40 A per pole. The T170 Series Time Switches allow for up to 10 ON/OFF settings per day, but give you the additional capability of skipping days in which the loads may not be needed. Each time switch will come with one set of ON/OFF trippers as well as three skipper screws to omit the schedule for at least three days. Features Controls loads up to 40 A per pole Direct 24-hour control of most loads Up to 10 ON/OFF operations each day Minimum ON/OFF times of one hour Manual override One ON and one OFF tripper and three day-skipper screws included Technical Information Minimum ON/OFF Times: 1 hour Maximum ON/OFF Operations: 10 Skipper Wheel: Not Included Timing Interval: 1 hr Operation Mode: 24 hour Has Manual Override: Yes Application Compatibilities: LED; HID Enclosure Type: Indoor type 1 metal Product Dimensions (H x W x D) in: 7.875 x 5.125 x 3.4375 in Wire Size Min: #14 AWG Wire Size Max: #8 AWG Load Ratings Tungsten Range(s): 40 A, 120-240 VAC, 60 Hz Electronic Ballast: 16 A, 277 VAC, 60 Hz Electronic Ballast Load Ratings Ranges: 16 A, 277 VAC, 60 Hz Inductive: 40 A, 240 VAC, 60 Hz; 40 A, 208 VAC, 60 Hz; 40 A, 120 VAC, 60 Hz Motor: 2 HP, 24 FLA @ 120 VAC, 60 Hz;5 HP, 28 FLA @ 240 VAC, 60 Hz Resistive Load Ratings Ranges: 40 A, 120-240 VAC, 60 Hz Inductive Load Ratings Ranges: 40 A, 120-240 VAC, 60 Hz Pilot Duty Load Ratings Ranges: 1000 VA, 120-240 VAC, 60 Hz Wiring Option: Terminals Input Voltage Range(s): 120 VAC, 60 Hz Number of Circuits: 1 Switch Type: SPST Maximum Power Consumption (W): 3 W Temperature (operation): -40 °F to 130 °F / (-40 °C to 54 °C) UL Certification: cULus CSA Certification: cCSAus Country of Origin (Intermatic): MEXICO Warranty Period: 1-Year limited Document Technical Sheet Instruction

Description The T100 Series Mechanical Time Switch has proven it can stand the test of time. These dependable time switches can handle electrical loads up to 40 A per pole and allow for up to 12 ON/OFF operations per day. A manual override switch provides added convenience. Features Highest motor load ratings in the industry 12 ON/OFF operations per day One ON and one OFF tripper included Can be installed in most Intermatic enclosures Available with pool heater protection Teeter-type terminals for multiple load connections Technical Information Minimum ON/OFF Times: 1 hour Maximum ON/OFF Operations: 12 Skipper Wheel: Not Included Timing Interval: 1 hr Operation Mode: 24 hour Has Manual Override: Yes Application Compatibilities: LED; HID Enclosure Type: Indoor type 1 metal Number of Trippers: Included 1 ON/1 OFF Product Dimensions (H x W x D) in: 7 7/8 x 5 1/8 x 3 7/16 in Wire Size Min: #14 AWG Wire Size Max: #8 AWG Knockout Dimensions Bottom: (2) combination 1/2" - 3/4" Knockout Dimensions Back: (1) combination 1/2" - 3/4" Load Ratings Tungsten Range(s): 40 A, 120-240 VAC, 60 Hz Electronic Ballast: 16 A Electronic Ballast: Load Ratings Ranges 16 A, 120-277 VAC Inductive: 40 A, 240 VAC, 60 Hz; 40 A, 208 VAC, 60 Hz; 40 A, 120 VAC, 60 Hz Motor: 2 HP, 24 FLA @ 120 VAC, 60 Hz;5 HP, 28 FLA @ 240 VAC, 60 Hz Resistive Load Ratings Ranges: 40 A, 120-240 VAC, 60 Hz Inductive Load Ratings Ranges: 40 A, 120-240 VAC, 60 Hz Pilot Duty Load Ratings Ranges: 1000 VA, 120-240 VAC, 60 Hz Wiring Option: Terminals Input Voltage Range(s):120 VAC, 60 Hz Number of Circuits: 1 Switch Type: DPST Maximum Power Consumption (W): 3 W Temperature (operation): -40 °F to 130 °F / (-40 °C to 54 °C) UL Certification: cULus CSA Certification: cCSAus Country of Origin (Intermatic): MEXICO Warranty Period: 1-Year limited Document Instruction Technical Information Brochure

Description The T100 Series Mechanical Time Switch has proven it can stand the test of time. These dependable time switches can handle electrical loads up to 40 A per pole and allow for up to 12 ON/OFF operations per day. A manual override switch provides added convenience. Features Direct 24-hour control of most loads Up to 12 ON/OFF operations each day with minimum ON/OFF times of one hour Manual override One ON and one OFF tripper included Can be installed in most Intermatic enclosures Technical Information Minimum ON/OFF Times: 1 hour Maximum ON/OFF Operations: 12 Skipper Wheel: Not Included Timing Interval: 1 hr Operation Mode: 24 hour Has Manual Override: Yes Application Compatibilities: LED; HID Enclosure Type: Indoor type 1 metal Number of Trippers Included: 1 ON/1 OFF Product Dimensions (H x W x D) in: 7 7/8 x 5 1/8 x 3 7/16 in Wire Size Min: #14 AWG Wire Size Max: #8 AWG Knockout Dimensions Bottom: (2) combination 1/2" - 3/4" Knockout Dimensions Back: (1) combination 1/2" - 3/4" Load Ratings Tungsten Range(s): 40 A, 120-277 VAC, 60 Hz Electronic Ballast: 16 A Electronic Ballast Load Ratings Ranges: 16 A, 120-277 VAC Inductive: 40 A, 277 VAC, 60 Hz; 40 A, 240 VAC, 60 Hz; 40 A, 208 VAC, 60 Hz; 40 A, 120 VAC, 60 Hz Motor: 2 HP, 24 FLA @ 120 VAC, 60 Hz;5 HP, 28 FLA @ 240 VAC, 60 Hz Resistive Load Ratings Ranges: 40 A, 120-480 VAC, 60 Hz Inductive Load Ratings Ranges: 40 A, 120-277 VAC, 60 Hz Pilot Duty Load Ratings Ranges: 1000 VA, 120-277 VAC, 60 Hz Wiring Option: Terminals Input Voltage Range(s): 208-277 VAC, 60 Hz Number of Circuits: 1 Switch Type: DPST Maximum Power Consumption (W): 3 W Temperature (operation): -40 °F to 130 °F / (-40 °C to 54 °C) UL Certification: cULus CSA Certification: cCSAus Country of Origin (Intermatic): MEXICO Warranty Period: 1-Year limited Document Brochure Technical Sheet Instruction

Description The T100 Series Mechanical Time Switch has proven it can stand the test of time. These dependable time switches can handle electrical loads up to 40 A per pole and allow for up to 12 ON/OFF operations per day. A manual override switch provides added convenience. Features Direct 24-hour control of most loads Up to 12 ON/OFF operations each day with minimum ON/OFF times of one hour Manual override One ON and one OFF tripper included Technical Information Minimum ON/OFF Times: 1 hour Maximum ON/OFF Operations: 12 Skipper Wheel: Not Included Timing Interval: 1 hr Operation Mode: 24 hour Has Manual Override: Yes Application Compatibilities: LED; HID Enclosure Type: Indoor type 1 metal Number of Trippers Included: 1 ON/1 OFF Product Dimensions (H x W x D) in: 7 7/8 x 5 1/8 x 3 7/16 in Wire Size Min: #14 AWG Wire Size Max: #8 AWG Knockout Dimensions Bottom: (2) combination 1/2" - 3/4" Knockout Dimensions Back: (1) combination 1/2" - 3/4" Load Ratings Tungsten Range(s): 40 A, 120-277 VAC, 60 Hz Electronic Ballast: 16 A Electronic Ballast Load Ratings Ranges: 16 A, 208-277 VAC Inductive: 40 A, 277 VAC, 60 Hz; 40 A, 240 VAC, 60 Hz; 40 A, 208 VAC, 60 Hz; 40 A, 120 VAC, 60 Hz Motor: 2 HP, 24 FLA @ 120 VAC, 60 Hz;5 HP, 28 FLA @ 240 VAC, 60 Hz Resistive Load Ratings Ranges: 40 A, 120-277 VAC, 60 Hz Inductive Load Ratings Ranges: 40 A, 120-277 VAC, 60 Hz Pilot Duty Load Ratings Ranges: 1000 VA, 120-277 VAC, 60 Hz Wiring Option: Terminals Input Voltage Range(s): 208-277 VAC, 60 Hz Number of Circuits: 1 Switch Type: SPST Maximum Power Consumption (W): 3 W Temperature (operation): -40 °F to 130 °F / (-40 °C to 54 °C) UL Certification: cULus CSA Certification: cCSAus Country of Origin (Intermatic): MEXICO Warranty Period: 1-Year limited Document Brochure Technical Sheet Instruction

Description The passive infrared sensors work by detecting the difference between heat emitted from the human body in motion and the background space. The sensor switch can turn a load ON and hold it as long as the sensor detects occupancy. After no motion is detected for the set time delay, the load turns OFF automatically. The sensor switch has one relay (equal to single pole switch), it also includes Ambient Light Level Sensor. Features Passive Infrared (PIR) sensing for presence detection Adjustable PIR sensitivity Adjustable time delay 15 sec to 30 min Adjustable ambient light sensor override Coverage: 150º, 980 ft2 with non-obstructed views IOS-DSIF models are Incandescent/Fluorescent/CFL/LED compatible and require a neutral connection 'No neutral' models offered for retrofit applications Fits standard decorator wall plate (included) Technical Information Sensor Switch Type: Occupancy Sensor Technology: PIR (Passive Infrared) Adjustable Time Delay Min: 15 sec Adjustable Time Delay Max: 30 min Adjustable Light Level Min: 30 lux Adjustable Light Level Max: Daylight PIR Coverage Area (sq ft):980 Application Compatibilities: Incandescent; Fluorescent; CFL; LED Mount Type: In-Wall PIR Coverage Pattern (degrees): 150 Maximum Mounting Height (ft): 4 ft Product Height (in): 2.75 Product Height (mm): 70 Product Width (in): 1 7/16 Product Width (mm): 37 Product Depth (in): 1.625 Product Depth (mm): 41 Color: White Includes Wall Plate: Yes Load Ratings Tungsten Range(s): 800 W Resistive Load Ratings Ranges: 800 W Motor Load Ratings Ranges: 1/8 HP Fluorescent Load Rating Ranges: 800 VA Input Voltage Range(s): 120 VAC, 60 Hz Occupancy Sensor Power Type: Line Voltage Neutral Connection Required: Yes Shipping Weight (kg): 0.181 Unit Carton Dimensions (H x W x L) in: 5 x 2.25 x 3 in Temperature (operation): 32 - 131°F / 0 - 55°C Warranty Period: 2-Year limited Country of Origin (Intermatic): CHINA Document Brochure Technical Sheet Instruction Sell sheet

Description The FF Series Commercial Countdown Timers are designed to replace any standard wall switch and do not require electricity to operate. These energy-efficient switches automatically limit the ON times for fans, lighting, motors, heaters, and other energy consuming loads. A commercial "brushed metal" look plate (plastic construction) meets NEC requirements. *NOTE: Not for use with sunlamps, saunas, or loads that could cause personal injury if timed incorrectly. Features 30-Minute timer SPST (Single-Pole Single-Throw) Breaks circuit at end of timing cycle No electricity required to operate Replaces any standard or decorator single-gang wall switch Automatically limits ON time for energy consuming loads Quick and easy installation Time-saving up front terminal connection with teeter-type terminals Brushed metal look switch plate meets NEC requirements (plate is included) Incandescent/fluorescent/CFL/LED compatible Technical Information Operation Mode: Countdown Countdown Time: 30 min Hold Mode Included: No Mechanism Type: Analog/Mechanical Application Compatibilities: Incandescent; Fluorescent; CFL; LED Wall Plate Configurations: Single-Gang; Multi-Gang Product Dimensions (H x W x D) in: 4.125 x 1.75 x 1.25 in Color: Silver Includes Wall Plate: Yes Load Ratings Resistive Heater: 20 A, 2500 W, 125 VAC; 10 A, 2500 W, 250 VAC; 10 A, 2770 W, 277 VAC Tungsten (Incandescent) Range(s): 7 A, 125 VAC, 50/60 Hz, 875 W Motor Load Ratings Ranges: 1 HP, 125 VAC; 2 HP, 250 VAC Input Voltage Range(s): 125-277 VAC, 50/60 Hz Wiring Configurations: Single Switch Type: SPST Neutral Connection Required: No Temperature (operation): 40 - 120 °F / 4 - 49 °C Country of Origin (Intermatic): TUNISIA Warranty Period: 1-Year limited Document Technical Information Instruction

Description The FD Series Decorator Countdown Timers are designed to replace any standard or decorator style wall switch, single- or multi-gang. These mechanical timers do not require electricity to operate. They automatically limit the ON times for fans, lighting, motors, heaters and other energy consuming loads. *NOTE: Not for use with sunlamps, saunas, or loads that could cause personal injury if timed incorrectly. Features 60-minute timer SPST (Single-Pole Single-Throw) No electricity required to operate Replaces any standard or decorator single- or multi-gang wall switch Automatically limits ON time for energy consuming loads Quick and easy installation Time-saving up front terminal connection with teeter-type terminals Breaks circuit at end of timing cycle Incandescent/fluorescent/CFL/LED compatible No neutral connection is required Technical Information Operation Mode: Countdown Countdown Time: 60 min Hold Mode Included: No Mechanism Type: Analog/Mechanical Application Compatibilities: Incandescent; Fluorescent; CFL; LED Wall Plate Configurations: Single-Gang; Multi-Gang Product Dimensions (H x W x D) in: 4.125 x 1.75 x 1.25 in Color: White Load Ratings Resistive Heater: 20 A, 2500 W, 125 VAC; 10 A, 2500 W, 250 VAC; 10 A, 2770 W, 277 VAC Tungsten (Incandescent) Range(s): 7 A, 125 VAC, 50/60 Hz, 875 W Motor Load Ratings Ranges: 1 HP, 125 VAC; 2 HP, 250 VAC Input Voltage Range(s): 125-277 VAC, 50/60 Hz Wiring Configurations: Single Switch Type: SPST Neutral Connection Required: No Temperature (operation): 40 - 120 °F / 4 - 49 °C Country of Origin (Intermatic): TUNISIA Warranty Period: 1-Year limited Document Technical Information Instruction

Description The FD Series Decorator Countdown Timers are designed to replace any standard or decorator style wall switch, single- or multi-gang. These mechanical timers do not require electricity to operate. They automatically limit the ON times for fans, lighting, motors, heaters and other energy consuming loads. *NOTE: Not for use with sunlamps, saunas, or loads that could cause personal injury if timed incorrectly. Features 30-Minute timer SPST (Single-Pole Single-Throw) Breaks circuit at end of timing cycle No electricity required to operate Replaces any standard or decorator single- or multi-gang wall switch Automatically limits ON time for energy consuming loads Quick and easy installation Time-saving up front terminal connection with teeter-type terminals Incandescent/fluorescent/CFL/LED compatible No neutral connection is required Technical Information Operation Mode: Countdown Countdown Time: 15 min Hold Mode Included: No Mechanism Type: Analog/Mechanical Application Compatibilities: Incandescent; Fluorescent; CFL; LED Wall Plate Configurations: Single-Gang; Multi-Gang Product Dimensions (H x W x D) in: 4.125 x 1.75 x 1.25 in Color: White Load Ratings Resistive Heater: 20 A, 2500 W, 125 VAC; 10 A, 2500 W, 250 VAC; 10 A, 2770 W, 277 VAC Tungsten (Incandescent) Range(s): 7 A, 125 VAC, 50/60 Hz, 875 W Motor Load Ratings Ranges: 1 HP, 125 VAC; 2 HP, 250 VAC Input Voltage Range(s): 125-277 VAC, 50/60 Hz Wiring Configurations: Single Switch Type: SPST Neutral Connection Required: No Temperature (operation): 40 - 120 °F / 4 - 49 °C Country of Origin (Intermatic): TUNISIA Warranty Period: 1-Year limited Document Technical Information Instruction

Description The FD Series Decorator Countdown Timers are designed to replace any standard or decorator style wall switch, single- or multi-gang. These mechanical timers do not require electricity to operate. They automatically limit the ON times for fans, lighting, motors, heaters and other energy consuming loads. *NOTE: Not for use with sunlamps, saunas, or loads that could cause personal injury if timed incorrectly. Features 15-Minute timer SPST (Single-Pole Single-Throw) Breaks circuit at end of timing cycle No electricity required to operate Replaces any standard or decorator single- or multi-gang wall switch Automatically limits ON time for energy consuming loads Quick and easy installation Time-saving up front terminal connection with teeter-type terminals Incandescent/fluorescent/CFL/LED compatible No neutral connection is required Technical Information Model Number: FD15MWC Operation Mode: Countdown Countdown Time: 15 min Hold Mode Included: No Mechanism Type: Analog/Mechanical Application Compatibilities: Incandescent; Fluorescent; CFL; LED Wall Plate Configurations: Single-Gang; Multi-Gang Product Dimensions (H x W x D) in: 4.125 x 1.75 x 1.25 in Color: White Load Ratings Resistive Heater: 20 A, 2500 W, 125 VAC; 10 A, 2500 W, 250 VAC; 10 A, 2770 W, 277 VAC Tungsten (Incandescent) Range(s): 7 A, 125 VAC, 50/60 Hz, 875 W Motor Load Ratings Ranges: 1 HP, 125 VAC; 2 HP, 250 VAC Input Voltage Range(s): 125-277 VAC, 50/60 Hz Wiring Configurations: Single Switch Type: SPST Neutral Connection Required: No Temperature (operation): 40 - 120 °F / 4 - 49 °C Country of Origin (Intermatic): TUNISIA Warranty Period: 1-Year limited Document Technical Information Instruction

Description This series offers an easy way to upgrade from a basic mechanical time switch to an electronic time switch. These timers will allow for up-to-the-minute programming, battery backup for power loss, up to 28 events total, and automatic daylight saving time corrections without the need of user interaction. They come in standard 24-hour, 7-day and 7-day astronomic versions. Features Selector switch to determine input voltage between 120-277 VAC Up to 28 events total To-the-minute accuracy Temporary override or permanent manual override Automatic Daylight Saving Time adjustment Astronomic models enable dusk-to-dawn scheduling Technical Information Minimum ON/OFF Times: 1 min Minimum Pulse Time: 2 sec Maximum Pulse Time: 2 sec Maximum ON/OFF Times: Indefinite Maximum ON/OFF Operations: 28 Setpoint Program Count: 28 ON/OFF Operations: 28 Operation Mode: 7 day Daylight Savings Adjustment: Automatic Backup Type: Battery Battery Type: AAA Battery Service Type: Field Serviceable Enclosure Type: Indoor type 1 metal Product Dimensions (H x W x D) in: 7.875 x 5.125 x 3.4375 in Wire Size Min: #14 AWG Wire Size Max: #8 AWG Knockout Dimensions Bottom: (2) combination 1/2" - 3/4" Knockout Dimensions Back: (1) combination 1/2" - 3/4" Load Ratings Tungsten Range(s): 5 A, 120-240 VAC Electronic Ballast Load Ratings Ranges: 1 A, 120-277 VAC Magnetic Ballast (NO) Range(s): 20 A, 120-277 VAC Resistive (NO) Range(s): 20 A, 28 VDC; 30 A, 120/240 VAC Inductive Load Ratings NO Ranges: 30 A, 120/240 VAC Resistive Load Ratings Ranges: 20 A, 28 VDC; 30 A, 120/240 VAC Tungsten (NO) Range(s): 5 A, 120/240 VAC Motor Load Ratings Ranges: 1 HP, 120 VAC; 2 HP, 240 VAC Motor Load Ratings NO Ranges: 1 HP, 120 VAC; 2 HP, 240 VAC Voltage Selection Type: Selector Switch Wiring Option: Terminals Input Voltage Range(s): 120-277 VAC, 50/60 Hz Number of Circuits: 2 Switch Type: 2xSPST, 1xDPST or Pulse Maximum Power Consumption (W): 6 W Electronic Series ET1700 Series Temperature (operation): -40 °F to 104 °F / (-40 °C to 40 °C) Country of Origin (Intermatic): CHINA Warranty Period: 1-Year limited Document Brochure Technical Information Instruction

Description A 12 A rated timer that provides full 7-day programming capabilities with dusk-to-dawn functionality, ideal for use with medium to low power loads. *NOTE: Not for use with sunlamps, saunas, or loads that could cause personal injury if timed incorrectly. ***Wallplate not included*** Features 7-day programmable schedules with 14 ON/OFF events Astronomic clock feature determines dawn and dusk times Automatic Daylight Saving Time (DST) adjustment Random mode varies ON/OFF schedule to provide a "lived-in" appearance Single or 3-way switch compatible installation Incandescent/fluorescent compatible Built-in rechargeable, non-serviceable battery backup Requires neutral connection Decorator switch plate not included Technical Information Minimum ON/OFF Times: 1 min Maximum ON/OFF Operations: 14 Operation Mode: 24 hour Operation Features: Astronomic; Daylight Saving Time Mechanism Type: Digital/Electrical Backup Type: Battery Backup Protection Time: 100 Hours Battery Type: Rechargeable Battery Service Type: Non-Serviceable Application Compatibilities: Incandescent; Fluorescent Wall Plate Configurations: Single-Gang Country of Origin: CHINA Warranty Period: 1-Year limited Document Brochure Technical Information Instruction

Description This timer requires no programming; preset countdown times are activated by pressing a single button. Silent operation makes this timer ideal for applications where the noise of mechanical countdown timers is of concern. *NOTE: Not for use with sunlamps, saunas, or loads that could cause personal injury if timed incorrectly. ***Wallplate not included*** Features No programming required Provides silent operation in time ranges from 10 minutes to 1 hour Single-button time selection, with some models having a HOLD mode, for continuous ON operation Replaces single-pole switches in a variety of applications Incandescent/fluorescent/CFL/LED compatible For use with decorator-style wall plate (not included) Requires neutral connection Technical Information Color: Ivory Input Voltage Range: 120VAC - 60 Hz Neutral Connection Required: Yes Wiring Configurations: Single Wall Plate Configurations: Single-Gang Mechanism Type: Digital/Electrical Operation Mode: Countdown Hold Mode Included: Yes Countdown Time: 60 Min Time Presets: 10 min, 20 min, 30 min, 60 min Application Compatibilities: CFL, Fluorescent, Incandescent, LED Ballast Fluorescent: 8A, 1000VA Electronic Ballast LED: 4A, 500VA Motor Three Phase Ranges: 1/4 HP Resistive Heater: 15A, 1800W Tungsten Incandescent: 1000W Operating Temperature Max: 104°F (40°C) Operating Temperature Min: 32°F (0°C) Product Depth: 1.438in (36.5mm) Product Height: 4.125in (104.8mm) Product Width: 1.6888in (42.93mm) RoHS Certification: Yes Country of Origin: China Warranty Period: 1-Year Limited Document Technical Sheet Instruction

Description This timer requires no programming; preset countdown times are activated by pressing a single button. Silent operation makes this timer ideal for applications where the noise of mechanical countdown timers is of concern. *NOTE: Not for use with sunlamps, saunas, or loads that could cause personal injury if timed incorrectly. ***Wallplate not included*** Features No programming required Provides silent operation in time ranges from 10 minutes to 1 hour Single-button time selection, with some models having a HOLD mode, for continuous ON operation Replaces single-pole switches in a variety of applications Incandescent/fluorescent/CFL/LED compatible For use with decorator-style wall plate (not included) Requires neutral connection Technical Information Color: White Input Voltage Range: 120VAC - 60 Hz Neutral Connection Required: Yes Wiring Configurations: Single Wall Plate Configurations: Single-Gang Mechanism Type: Digital/Electrical Operation Mode: Countdown Hold Mode Included: Yes Countdown Time: 60 Min Time Presets: 10 min, 20 min, 30 min, 60 min Application Compatibilities: CFL, Fluorescent, Incandescent, LED Ballast Fluorescent: 8A, 1000VA Electronic Ballast LED: 4A, 500VA Motor Three Phase Ranges: 1/4 HP Resistive Heater: 15A, 1800W Tungsten Incandescent: 1000W Operating Temperature Max: 104°F (40°C) Operating Temperature Min: 32°F (0°C) Product Depth: 1.438in (36.5mm) Product Height: 4.125in (104.8mm) Product Width: 1.6888in (42.93mm) RoHS Certification: Yes Country of Origin: China Warranty Period: 1-Year Limited Document Technical Sheet Instruction

Description This timer requires no programming; preset countdown times are activated by pressing a single button. Silent operation makes this timer ideal for applications where the noise of mechanical countdown timers is of concern. *NOTE: Not for use with sunlamps, saunas, or loads that could cause personal injury if timed incorrectly. ***Wallplate not included*** Features No programming required Provides silent operation in time ranges from five minutes to 30 minutes Single-button time selection, with some models having a HOLD mode, for continuous ON operation Replaces single-pole switches in a variety of applications Incandescent/fluorescent/CFL/LED compatible For use with decorator-style wall plate (not included) Requires neutral connection Technical Information Color: Ivory Input Voltage Range: 120VAC - 60 Hz Neutral Connection Required: Yes Wiring Configurations: Single Wall Plate Configurations: Single-Gang Mechanism Type: Digital/Electrical Operation Mode: Countdown Hold Mode Included: Yes Countdown Time: 30 Min Time Presets: 5 min, 10 min, 15 min, 30 min Application Compatibilities: CFL, Fluorescent, Incandescent, LED Ballast Fluorescent: 8A, 1000VA Electronic Ballast LED: 4A, 500VA Motor Three Phase Ranges: 1/4 HP Resistive Heater: 15A, 1800W Tungsten Incandescent: 1000W Operating Temperature Max: 104°F (40°C) Operating Temperature Min: 32°F (0°C) Product Depth: 1.438in (36.5mm) Product Height: 4.125in (104.8mm) Product Width: 1.6888in (42.93mm) RoHS Certification: Yes Country of Origin: China Warranty Period: 1-Year Limited Document Technical Sheet Instruction

Description High quality and innovative styles set NuTone builder kits apart from the others. Doorbell kits feature a graceful curved style cover with a rich, textured face. Sold in multiples to support housing projects, this chime is the perfect complement to the high quality materials today's consumers expect. Features Basic white textured cover for a design that blends with builder finishing techniques For use with two entrances; two-note chime for front door, separate one-note tone for second door so no guest will be missed Order as standard pack of 24 to assist with your planning and still retain that economical edge Chime wires to a 16-volt transformer so you are assured of uninterrupted service and are never dependent upon batteries (transformer C905, included) Two lighted rectangular shaped pushbuttons with non-stick action included so you have one less thing to buy and the convenience of a complete package Refer to your local municipality building codes to be sure you are installing chimes that adhere to code since they vary by region Technical Information Color Finish: White Illuminated: Yes Push Button Type: Wired Material: Plastic Subcategory: Door chimes Product Depth: 2in Product Height: 5in Product Width: 9in cULus Listed: No Frequency (Hz): 60 Installation Type: Surface Mount Voltage: 120 UL Listed: No Battery Included: No Audible Alarm: Yes Motion Sensing: No Portable: No Document Installation Manual

Description The DNKIT includes (1) MLWSB and (1) DN6HD. The DN6HD Leviton Decora Smart No-Neutral Dimmer, along with the required Wi-Fi Bridge, MLWSB, lets you dim and brighten lights from anywhere. A new addition to the My Leviton family, this is the perfect retrofit solution to install smart lighting control in older homes that may not have neutral wiring available in the wallbox. Add optional wire-free 3-way/multi-location where you need it, simply pair with a wireless DAWDC Anywhere Dimmer Companion or DAWSC Anywhere Switch Companion (no wiring required). Pairing a Decora Smart No-Neutral Dimmer (DN6HD) or No-Neutral Switch (DN15S) with a Wi-Fi Bridge makes it easier than ever to install smart lighting control in homes without neutral wiring in the electrical wallbox. The Wi-Fi Bridge provides up to 2,500 sq. ft. of coverage. Place in a central location within 50 ft. of Decora Smart No-Neutral devices. Features No-neutral required: for use in older homes without neutral wiring in the electrical wallbox, starter kit includes dimmer (DN6HD) and Wi-Fi bridge (MLWSB) Older homes: now every home can be a smart home - easy smart dimmer installation (line, load and ground connection required), Wi-Fi bridge simply plugs in to a wall outlet Choice of voice: works with hey google, Alexa or apple Siri Lighting control: full range dimming with custom settings for preset light levels, fade rates and bulb types, easily create schedules to match your lifestyle with the my Leviton app Supports wire-free 3-way: add wireless multi-location control when paired with optional anywhere dimmer companion (DAWDC) or anywhere switch companion (DAWSC) Technical Information Colour Family: White Control Style: 3-Way, 2-Way, Multi-Location Light Bulb Compatibility: Incandescent, Halogen, MLV, CFL, LED Location Compatibility: Indoor Material: Thermoplastic Maximum Load (Watts): Up to 300W with LED CFL or 600W with Incandescent and MLV. Switch Features: Indicator Light, Lamps Compatible, Wall Plate Included, Programmable Switch Type: Rocker Voltage (volts): 120 Works With: Google Assistant, Amazon Alexa, Apple Siri Document Installation Manual Installation Manual

Description The MLWSB Leviton Decora Smart Wi-Fi Bridge is an easy-to-install plug-in that is required to enable smart features for Decora Smart No-Neutral devices, such as connectivity to My Leviton, Apple HomeKit, Alexa and Google Assistant. Its small form factor lets you plug it into any outlet without taking up space on a shelf or desk. Pairing a Decora Smart No-Neutral Dimmer (DN6HD) or No-Neutral Switch (DN15S) with a Wi-Fi Bridge makes it easier than ever to install smart lighting control in homes without neutral wiring in the electrical wall box. The Decora Smart Wi-Fi Bridge provides up to 2,500 sq. ft. of coverage and should be placed in a central location within 50 ft. of Decora Smart No-Neutral devices. Features RETROFIT SOLUTION: For use in homes without neutral wiring in the wallbox. Works with Decora Smart DN6HD No-Neutral Dimmer and DN15S No-Neutral Switch EASY INSTALL: Plugs into any 120VAC outlet including GFCI, AFCI and USB DISCREET SIZE : Does not obstruct other devices from being plugged into the same outlet EXPANSIVE COVERAGE: Provides up to 2,500 sq. ft. of coverage CONNECTIVITY: Wi-Fi Bridge Works With My Leviton, Apple HomeKit, Amazon Alexa, Hey Google, and more; Once connected, easily add a Decora Smart No-Neutral Dimmer (DN6HD) or Switch (DN15S) using the My Leviton app COMPATIBILITY: MLWSB Wi-Fi Bridge is only needed to enable connectivity for the DN6HD dimmer and DN15S switch. Document Installation Manual

Description The DN15S Leviton Decora Smart No-Neutral Switch, along with the required MLWSB Wi-Fi Bridge (sold separately) lets you turn lights on/off from anywhere. A new addition to the My Leviton family, this is the perfect retrofit solution to install smart lighting control in older homes that may not have neutral wiring available in the wallbox. There's now a My Leviton solution for every room and home. Pair with a MLWSB Decora Smart Wi-Fi Bridge for connectivity to the My Leviton app for scheduling and remote control or use your voice to control lighting with Alexa, Google Assistant or Apple Siri. Add optional wire-free 3-way/multi-location where you need it by pairing with wire-free DAWSC Anywhere Switch Companion (no wiring required). Optional Color Change Kits available in Ivory, Black, Gray, Brown and Light Almond. Rated for General Use 15A, LED/CFL/Electronic Ballast 5A, Incandescent/Halogen 1500W, Magnetic Ballast 15A and Motor 3/4 HP. Line, Load and Ground connection required. Features RETROFIT SOLUTION: For use in homes without neutral wiring in the wallbox, requires MLWSB Decora Smart Wi-Fi Bridge (sold separately) MY LEVITON APP: Use for scheduling, remote control and dimmer settings (requires MLWSB Wi-Fi Bridge) CHOICE OF VOICE: Works with Hey Google, Amazon Alexa or Apple HomeKit/Siri (requires MLWSB Wi-Fi Bridge) WIRE-FREE 3-WAY: Add Wire-Free Multi-location control when paired with optional Anywhere Dimmer Companion (DAWDC) or Anywhere Switch Companion (DAWSC) Technical Information Colour Family: White Control Style: 3-Way, 2-Way, Multi-Location Light Bulb Compatibility: Incandescent, Halogen, MLV, CFL, LED Location Compatibility: Indoor Material: Thermoplastic Maximum Load (Amps): Up to 5A with LED CFL or 15A with Incandescent and MLV or 3/4HP motors Switch Features: Indicator Light, Lamps Compatible, Wall Plate Included, Programmable Switch Type: Rocker Voltage (volts): 120 Works With: Google Assistant, Amazon Alexa, Apple Siri Document Installation Manual

Description The DN6HD Leviton Decora Smart No-Neutral Dimmer, along with the required MLWSB Wi-Fi Bridge (sold separately) lets you dim and brighten lights from anywhere. A new addition to the My Leviton family, this is the perfect retrofit solution to install smart lighting control in older homes that may not have neutral wiring available in the wallbox. There's now a My Leviton solution for every room and home. Pair with a MLWSB Decora Smart Wi-Fi Bridge for connectivity to the My Leviton app for scheduling and remote control or use your voice to control lighting with Alexa, Google Assistant or Apple Siri. Add optional wire-free 3-way/multi-location where you need it by pairing with wireless DAWDC Anywhere Dimmer Companions or DAWSC Anywhere Switch Companions (no wiring required). Features RETROFIT SOLUTION: For use in homes without neutral wiring in the wallbox, requires MLWSB Decora Smart Wi-Fi Bridge (sold separately) MY LEVITON APP: Use for scheduling, remote control and dimmer settings (requires MLWSB Wi-Fi Bridge) CHOICE OF VOICE: Works with Hey Google, Amazon Alexa or Apple HomeKit/Siri (requires MLWSB Wi-Fi Bridge) FULL RANGE DIMMING: Custom app settings for preset light levels, fade rates and bulb types WIRE-FREE 3-WAY: Add Wire-Free Multi-location control when paired with optional Anywhere Dimmer Companion (DAWDC) or Anywhere Switch Companion (DAWSC) Technical Information Colour Family: White Control Style: 3-Way, 2-Way, Multi-Location Light Bulb Compatibility: Incandescent, Halogen, MLV, CFL, LED Location Compatibility: Indoor Material: Thermoplastic Maximum Load (Watts): Up to 300W with LED CFL or 600W with Incandescent and MLV. Switch Features: Indicator Light, Lamps Compatible, Wall Plate Included, Programmable Switch Type: Rocker Voltage (volts): 120 Works With: Google Assistant, Amazon Alexa, Apple Siri Document Installation Manual

Description The Dalia LED+ dimmer features a classic design that fits with any home décor. The LED+ advanced technology provides superior dimming of LED, halogen, and incandescent bulbs. It is great for homes of any age, because if doesn't require a neutral wire. The SoftGlow locator light helps you find the dimmer in the dark. Features Push on/push off rotary knob with locator light for a traditional wallplate opening LED+ technology: Advanced Lutron dimming circuitry designed for compatibility with most high-efficacy light bulbs UL Listed to control: Dimmable LED with integrated driver Halogen Incandescent Dimmable compact fluorescent lamps (CFL) with integrated ballast Low-end adjustment to accommodate a wide range of bulbs 100% factory tested Locator light features a soft glow to help you find the dimmer in the dark Technical Information Voltage: 120V Load: 150W Dimmable LED/CFL or 600W incandescent/Halogen Environment: indoor use only Operating temperature: 0°C to 40°C (32°F to 104°F) Document Installation Guide Brochure Specification Sheet

Description Caseta Wireless by Lutron provides easy and reliable control of your lights, shades and temperature from the free Lutron app. Experience superior dimming performance of LED bulbs, schedule lights to automatically adjust, and control lights and scenes with your voice via Alexa and Siri. Unlike other smart dimmer switches, Caseta works in any home, of any age, because it does not require a neutral wire. You can create a 3-way by mounting the included Pico to almost any wall surface without cutting holes or pulling wire, requires Pico Wallmount Bracket (PICO-WBX-ADAPT sold separately); you can also replace existing 3-way switches by mounting the bracket and Pico over the backbox. Works with up to 150W dimmable LED/CFL bulbs or 600W incandescent/halogen bulbs; not rated for low voltage applications. KIT INCLUDES EVERYING YOU NEED TO GET STARTED: (1) Caseta Wireless Smart Bridge, (2) Caseta Wireless Dimmers, (2) Pico remote controls, (2) pedestals, (2) 1-gang Claro wall plates Features PEACE OF MIND Set lights to automatically adjust with changing seasons so your family always comes back to a well-lit home; you can also enable the smart away feature to randomly turn your lights on and off to look like you're home even if you're away MOST CONNECTED Caseta connects with more leading smart home devices including Amazon Alexa, Apple HomeKit, the Google Assistant, Ring, Serena shades and Sonos than any other smart lighting control brand CONTROL YOUR WAY Caseta puts the smarts in the switch so you can control your lights a variety of ways - via the free Lutron app, your voice, or from the switch, you can create personalized schedules to turn on, off or dim lights at set times to best fit your everyday routines or activate favorite lighting scenes with the touch of a button RELIABLY SMART The smart bridge doesn't use Wi-Fi, so you get super-fast, ultra-reliable smart lighting that works right, without slowing your Wi-Fi down with more devices SET IT AND FORGET IT Always keep your smart light functionality; even when the Wi-Fi goes down, there's no need to reset your schedules and scenes or reconnect everything when it comes back online GET MORE, SPEND LESS One Caseta smart switch can control many bulbs at once; make many bulbs smart, even your existing bulbs; get smart control of multiple styles of dimmable LED, incandescent and halogen bulbs Document Caseta Brochure

Description Ensure you and your family always enter a well-lit home. Use the smart switch to set your front porch lights to turn on at dusk, ensuring your home is not dark when you return. Create schedules to turn lights on and off at set times to best fit your everyday routines and activate scenes with just the touch of a button. The geofencing feature allows you to never have to worry that you forgot to turn off the lights set your lights to instantly turn off the minute you leave your home. Caseta allows you to control your lights, your way use the free app, your voice (voice assistant and smart bridge required), the wireless Pico remote, or the switch at the wall itself. The smart switch also allows you to control multiple styles of bulbs at once. Features PEACE OF MIND Set outdoor lights to turn on at dusk, so your family can return to a well-lit home MOST CONNECTED Caseta connects with more leading smart home devices including Alexa, Apple Home Kit, the Google Assistant, Serena shades and Sonos than any other smart lighting control brand OUTDOOR ENTERTAINING Control your patio and deck lights with ease. You can create personalized schedules to turn lights on/off at set times, or activate lighting scenes with the touch of a button SUNSET TRACKER Schedule outdoor lights to turn on every night as the sun sets even when the seasons change and you gain or lose an hour SMART 3-WAY CONTROL Place remote over existing electrical box with included bracket or add a new point of control anywhere in the home, without cutting holes or pulling wire TECHNICAL DETAILS Works with up to 600W incandescent/halogen/ELC/MLV, 5-amps of LED/CFL or 3-amps of ceiling or exhaust fans Document Caseta Brochure

Description Ensure you and your family always enter a well-lit home. Use the smart switch to set your front porch lights to turn on at dusk, ensuring your home is not dark when you return. Create personalized schedules to turn lights on and off at set times to best fit your everyday routines and activate customized lighting scenes with just the touch of a button. Schedule your outdoor lights to turn on every night, as the sun sets - even when the seasons change and you gain or lose an-hour. The geofencing feature allows you to never have to worry that you forgot to turn off the lights - set your lights to instantly turn off the minute you leave your home. Caseta allows you to control your lights, your way - use the free app, your voice (voice assistant and smart bridge required), the wireless Pico remote, or the switch at the wall itself. The smart switch also allows you to control multiple styles of bulbs at once - control your deck and patio lights all at once to transform your outdoor living space for your family and guests. For added convenience, use your smart switch with a wireless Pico remote (sold separately) to turn your lights on or off with the simple touch of a button from anywhere in your home. Add an extra-point of control and mount your Pico to virtually any surface with a Pico wall mount bracket (sold separately), no cutting holes or pulling wire required. Features Includes: (1) Lutron Caseta smart switch, (1) smart bridge, and (1) white wallplate. Neutral wire required PEACE OF MIND: Set outdoor lights to turn on at dusk, so your family can return to a well-lit home MOST CONNECTED: Caseta connects with more leading smart home devices - including Alexa, Apple HomeKit, the Google Assistant, Ring, Serena shades and Sonos - than any other smart lighting control brand OUTDOOR ENTERTAINING: Make personalized schedules to control patio and deck lights at set times to best fit your routines, or activate favorite lighting scenes with the touch of a button SUNSET TRACKER: Schedule outdoor lights to turn on every night as the sun sets - even when the seasons change and you gain or lose an hour SMART 3-WAY CONTROL: Place remote over existing electrical box with included bracket or add a new point of control anywhere in the home, without cutting holes or pulling wire GEOFENCING: Smart lighting that knows when you come and go - get an alert when you head out indicating you've left the lights on or automatically set lights to turn off - all based on your location CONTROL YOUR WAY: Caseta puts the smarts in the switch so you can control your lights a variety of ways - via your smartphone, your voice, the Pico wireless remote (sold separately), or directly from the switch GET MORE, SPEND LESS: One Caseta smart switch can control many bulbs at once; make many bulbs smart, even your existing bulbs. Get smart control of multiple styles of LED, incandescent, and halogen bulbs TECHNICAL DETAILS: Works with up to 600W incandescent/halogen/ELC/MLV, 5-amps of LED/CFL or 3-amps of ceiling or exhaust fans. Neutral wire required for switch Document Caseta Brochure Bridge Spec Sheet Installation Manual

Description The Swidget product line has been developed to support the easy integration of Home Automation and Smart Home markets with unique and flexible solutions. Interchangeable Swidget Inserts can be installed, removed or replaced - making Swidget the optimal choice for building renovations and new construction. Adding a Swidget Insert turns the wired device into a powerful and flexible Smart Home device. The interchangeability of the Swidget Inserts ensure that the system can work with any existing or future Smart Home wireless system. Using the free Swidget App (available for Android and iOS), unlock your Swidget device to perform any number of tasks: Power On/Off your outlet Monitor your energy consumption Schedule devices to conserve energy Set multiple automatic notifications including when your power consumption is too high As all Swidget Inserts operate on the Class 2 certified interface, an electrician is not required for installation or removal. Designed to be integrated into all major Smart Home protocols, the Swidget Wi-Fi Control + Power Out Light Insert provides dual functions. The Wi-Fi connectivity transforms the Swidget Outlet or Switch into a Wi-Fi smart device. The Power Out Light addition provides LED based illumination when the power goes out. Utilizing high efficient LED output and an energy storage design that does not require batteries, this light will illuminate for up to 1 hour on a full charge. Features Wi-Fi 2.4GHz Automatic emergency lighting when the power goes out Up to 1 hour of illumination - no batteries required High efficiency LED * 3rd party integrations are controlled and managed by external service providers. Swidget makes no warranty that these services will continue to exist or be supported over the full life of the product. Technical Information Wireless standard: Wi-Fi 802.11g Wireless band: 2.4GHz Device compatibility: Amazon Alexa, Google Assistant and IFTTT Device upgrades: OTA Environmental: Indoor installation only Operating temperature: -10 °C to 40 °C (14 °F to 104 °F) Additional specs: LED Intensity Specification: 1900mcd @ 20mA Operation: Automated illumination at loss of power Max. Run Time: 1 hour Charge Times: 20% @ 5min, 80% @ 60min Document Brochure Data Sheet

Description The Swidget product line has been developed to support the easy integration of Home Automation and Smart Home markets with unique and flexible solutions. Interchangeable Swidget Inserts can be installed, removed or replaced - making Swidget the optimal choice for building renovations and new construction. Adding a Swidget Insert turns the wired device into a powerful and flexible Smart Home device. The interchangeability of the Swidget Inserts ensure that the system can work with any existing or future Smart Home wireless system. Using the free Swidget App (available for Android and iOS), unlock your Swidget device to perform any number of tasks: Power On/Off your outlet Monitor your energy consumption Schedule devices to conserve energy Set multiple automatic notifications including when your power consumption is too high As all Swidget Inserts operate on the Class 2 certified interface, an electrician is not required for installation or removal. Designed to be integrated into all major Smart Home protocols, the Swidget Wi-Fi Control + Guide Light Insert provides dual functions. The Wi-Fi connectivity transforms the Swidget Outlet or Switch into a Wi-Fi smart device. The Guide Light addition provides all the features of a standard night light, using high efficiency LED technology to brighten any dark room or space safely. Features Wi-Fi 2.4GHz Automatic light sensor trigger Works with Amazon Alexa, Google Assistant and IFTTT* High efficiency LED * 3rd party integrations are controlled and managed by external service providers. Swidget makes no warranty that these services will continue to exist or be supported over the full life of the product. Technical Information Wireless standard: Wi-Fi 802.11g Wireless band: 2.4GHz Device compatibility: Amazon Alexa, Google Assistant and IFTTT Device upgrades: OTA Environmental: Indoor installation only Operating temperature: -10 °C to 40 °C (14 °F to 104 °F) Additional specs: LED Colour: Warm white LED Intensity Specification: 1900 mcd @ 20mA Trigger: Automated light sensor Document Brochure Data Sheet

Description The Swidget product line has been developed to support the easy integration of Home Automation and Smart Home markets with unique and flexible solutions. Interchangeable Swidget Inserts can be installed, removed or replaced - making Swidget the optimal choice for building renovations and new construction. Adding a Swidget Insert turns the wired device into a powerful and flexible Smart Home device. The interchangeability of the Swidget Inserts ensure that the system can work with any existing or future Smart Home wireless system. Using the free Swidget App (available for Android and iOS), unlock your Swidget device to perform any number of tasks: Power On/Off your outlet Monitor your energy consumption Schedule devices to conserve energy Set multiple automatic notifications including when your power consumption is too high As all Swidget Inserts operate on the Class 2 certified interface, an electrician is not required for installation or removal. Designed to be integrated into all major Smart Home protocols, the Swidget Wi-Fi Control + USB Charger provides dual functions. The Wi-Fi connectivity transforms the Swidget Outlet or Switch into a Wi-Fi smart device. The USB Charger interface provides a standard Type A USB Charger to allow for the fast-charging of your devices. Features Wi-Fi 2.4GHz Type A USB Connector Works with Amazon Alexa, Google Assistant and IFTTT* Regular OTA upgrades to expand capabilities * 3rd party integrations are controlled and managed by external service providers. Swidget makes no warranty that these services will continue to exist or be supported over the full life of the product. Technical Information Wireless standard: Wi-Fi 802.11g Wireless band: 2.4GHz Device compatibility: Amazon Alexa, Google Assistant and IFTTT Device upgrades: OTA Environmental: Indoor installation only Operating temperature: -10 °C to 40 °C (14 °F to 104 °F) Additional specs: Output Power Rating: 5Vdc +/- 5% @ 2A (Class 2) USB Output Connector: Type A Smart Change Detection: BC1.2 Compliant Document Brochure Data Sheet

Description The Swidget product line has been developed to support the easy integration of Home Automation and Smart Home markets with unique and flexible solutions. Interchangeable Swidget Inserts can be installed, removed or replaced - making Swidget the optimal choice for building renovations and new construction. Adding a Swidget Insert turns the wired device into a powerful and flexible Smart Home device. The interchangeability of the Swidget Inserts ensure that the system can work with any existing or future Smart Home wireless system. Designed to be integrated into all major Smart Home protocols, the Swidget Wi-Fi Control transforms the Swidget Outlet or Switch into a Wi-Fi smart device. Using the free Swidget App (available for Android and iOS), unlock your Swidget device to perform any numberof tasks: Power On/Off your outlet Monitor your energy consumption Schedule devices to conserve energy Set multiple automatic notifications including when your power consumption is too high As all Swidget Inserts operate on the Class 2 certified interface, an electrician is not required for installation or removal. When connected to a 2.4GHz Wi-Fi network, the Motion Insert can be used to create sensor-based automations, where motion or occupancy can trigger actions in switches, outlets, send notifications, and more. Sensor information can also be relayed to various control systems, including Alexa and Google Assistant*, for use in a variety of applications. Features Wi-Fi 2.4GHz Independent power monitoring on each circuit Works with Amazon Alexa, Google Assistant and IFTTT* Regular OTA upgrades to expand capabilities * 3rd party integrations are controlled and managed by external service providers. Swidget makes no warranty that these services will continue to exist or be supported over the full life of the product. Technical Information Wireless standard: Wi-Fi 802.11g Wireless band: 2.4GHz Device compatibility: Amazon Alexa, Google Assistant and IFTTT Device upgrades: OTA Environmental: Indoor installation only Operating temperature: -10 °C to 40 °C (14 °F to 104 °F) Additional specs: Average Range Detection: 5m Field of View: 120 degrees Vacancy Timer: Adjustable between 1-60 minutes Document Brochure Data Sheet

Description The Swidget product line has been developed to support the easy integration of Home Automation and Smart Home markets with unique and flexible solutions. Adding a Swidget Insert turns the wired device into a powerful and flexible Smart Home device. The interchangeability of the Swidget Inserts ensure that the system can work with any existing or future Smart Home wireless system. The Dimmer Switch has the ability to allow interchangeable Swidget Inserts to be installed, removed or replaced - making Swidget the optimal choice for building renovations and new construction. The Swidget Dimmer Switch uses a simple 3-wire interface, making installation easy. Features ON/OFF/Dimmer control in a single pad with the capability for scene programming (Wi-Fi Inserts only) Designed with industry-leading anti-flicker technology for dimmable LED's Direct power monitoring Wide range of customization and feature options with plug and play Swidget Inserts Technical Information Input power rating: 125VAC, 2.5A Wiring type Pre-stripped wire leads (Line/Neutral): #16 AWG (Stranded), Ground screw Testing and code compliance: UL1472/ UL1310, CSA C22.2 #184.1, #223 (Canada and US) – Apr 2020 Flammability: UL94 5VA Environmental: Indoor installation only Operating temperature: -10 °C to 40 °C) (14 °F to 104 °F) Insert voltage output: Nominal 5VDC (+/- 5%) Insert DC protection: Class 2 - Current limiting and thermal shutdown protection Insert current output: Constant current maximum 2.0A LED/CFL load rating: 150W Incandescent/Halogen load rating: 300W Horsepower load rating: -- Switch configuration: Single pole, dry contact Number of poles: Single (1p) Compatibility: NEMA SSL 7A Compliant – Apr 2020 Document Brochure Data sheet

Description The Leviton Smart Wall Switch Occupancy Sensor (ODS15-Ixx) uses Passive Infrared (PIR) detection technology to monitor a room for occupancy using a segmented, tamper resistant lens. When a person passes in or out of a sensor zone, the sensor detects motion and switches the lights ON. The lights will remain ON as long as an occupant is moving through the sensor zones. The ODS15-I1W ’s vacancy mode features a Manual-ON/Auto-OFF for installations where manual-ON switching is required for energy code applications. A “minor motion” zone detects small body movements allowing the lights to stay ON even though a person may not be moving or walking around the room. The “major motion” zone, exhibits a lesser degree of sensitivity and requires larger movements. Configuration of ODS15-I1W is made using the Leviton Smart Sensor App from a smartphone or other Bluetooth® enabled Android or iOS device. Simple configuration can also be applied using pushbutton setup for several popular preconfigured options. Benefits Can be used to comply with IECC, ASHRAE 90.1, and 2019 Title 24, Part 6 occupancy/vacancy sensing and manual control requirements Fits in a standard wall box and gangable with other units Controls General Purpose plug loads up to 20A and LED lighting loads up to 10A One relay module for single-level switching 180° field-of-view provides approximately 1,100 square feet of coverage Maximum sensing distance in front of the sensor is 30-40 feet and 15-20 feet on either side Advanced configuration can be performed using the Leviton Smart Sensor App on any Bluetooth enabled Android or iOS device: Set operating mode to Auto-ON/Auto-OFF or Manual-ON/Auto-OFF Adjust the sensitivity of the sensor to increase or decrease coverage area Adjust timeouts Activate the nightlight and select nightlight colors Add daylighting hold-off and select target daylighting levels Set a security code to lock configuration settings Out-of-the-box configuration default mode: Auto-ON/Auto-OFF with 10-minute time out Sensitivity set to 75% Nightlight and daylighting disabled Technical Information Color: White Coverage (Sq.Ft.): 1000 Grade: Commercial Mounting Type: Wall Switch Product Line: ODS15 Sensor Type: Occupancy / Vacancy Technology: Passive Infrared Frequency: 60Hz Voltage: 120 VAC Neutral Wire Connection: Required Switch Type: Single-Pole Wallplate: Non-included Document Data Sheet Quick Start Guide for the Smart Sensor App Installation guide