Datacom Accessories

Description IDEAL Keystone Jacks are high-performance modular jack connectors designed to exceed the CAT5e requirements giving installers the ability to use these products in residential and commercial installations for applications such as Gigabit Ethernet. Benefits 110 IDC style termination with internal PCB 100 MHz / 1Gb performance Keystone dimensions provide compatibility with other devices All jacks feature a robust internal printed circuit board design that helps reduce near-end-cross talk and improve RF performance at higher frequencies UL listed, RoHS compliant Technical Information Color: Blue Cable Type: CAT5e Termination Method: Punchdown Gender: Female Current Rating: 1.5 Amps Insulation Resistance: 50m ohm Contact Resistance: 20m ohm DC Resistance: 0.1 ohm Dielectric Withstanding Voltage: 1000V Documents Product Datasheet

Description Exclusive Klein-designed CAT6A Pass-Thru™ modular plugs for fast, reliable connector installations for data applications. CAT6A shielded cable easily passes through connector for consistent and secure termination. Saves time, trims flush to end face when used with Klein Tools Pass-Thru™ Modular Crimper Cat. No. VDV226-110, and eliminates wasted materials. Features Klein exclusive Pass-Thru™ Connectors provide fast, reliable connector installations for data applications For CAT6A shielded cable and larger diameter/thicker jacket CAT6 cable CAT6A cable easily passes through connector to visually ensure that wires are in the correct order for consistent and secure terminations Fully compliant with Power Over Ethernet (PoE and PoE+) standards Requires pass-through type crimping tool (Cat. No. VDV226-110 recommended) 8 position, 8 contact pass-through type data plugs for solid or stranded wire Category 6A performance per TIA/EIA-568-B.2 50-Pack 50 µ-inch gold plating on all contact surfaces Max diameter for CAT6A Pass-Thru™ Connectors is 0.043-Inch (1.1 mm) Technical Information Type: Modular Application: Voice and Data Special Features: Pass-Thru Technology; Meets All PoE+ Standards Overall Length: 0.8'' (2 cm) Overall Height: 0.6'' (1.5 cm) Overall Width: 0.4'' (1 cm) Material: PVC Plastic; Gold Plated Contacts Connector Type: RJ45 Cable Type: CAT6A STP and Larger Diameter CAT6 Position & Contacts: 8P 8C Connector Color: Clear Solid Conductor Wire: Yes Stranded Conductor Wire: Yes Package Quantity: 50 Weight: 6.05 oz (171 g) Document Brochure Instruction

Description The 33-507 Feed-Thru RJ-45 installation kit includes the necessary tools to cut, strip and terminate RJ-45, 8P8C modular plugs to twisted pair cabling. The tools in the kit are designed to work together with CAT5e, CAT6 and CAT6A cabling. The FT-45 ™ crimp tool is a compact, lightweight crimper that provides a flush cut on IDEAL Feed-Thru modular plugs. It is also compatible with standard (non-Feed-Thru) and shielded connectors. The PrepPRO stripper utilizes a fixed depth blade to score the jacket of twisted pair cable without nicking the inner conductors. Scissors are included for cutting off old connector ends and trimming the cable or conductors to size. The pouch includes a clip to attach the kit to a tool bag or belt and keeps the termination tools together in one compact space. A spare slot is included to add the 35-485 Punch Down Tool, or other similar shaped tool to the kit. The small round slot can be used to hold additional Punch Down tool blades. Features Tool installation kit for terminating RJ-45 modular plugs to twisted pair cable Includes FT-45 ™ Feed-Thru Modular Plug Crimp Tool (30-495), PrepPRO ® stripper (45-605), scissors (35-088) and pouch with clip Crimps standard, Feed-Thru and shielded CAT5e, CAT6 and CAT6A modular plugs Spare slot in pouch to hold 35-485 Punch Down Tool Document Catalogue

Description The 62-200 LinkMaster ™ is our basic wiremapper for identifying wiring and continuity errors in twisted pair cabling. Wiremappers are used to verify if the cable is physically terminated properly at both ends and that there are no major cable defects present in the cable, such as cut conductors, that would prevent signal continuity. Colored LED lights identify pass/fail conditions of each pair of wires in RJ-45 8 conductor cables. This tester is used for testing RJ-45 connector cables terminated to Cat 3/5/5e/6/6a twisted pair cables. When the test is activated, LinkMaster ™ checks each pair of the cable for any opens (unterminated or cut conductors), shorts (cut or nicked conductors that come into contact), miswires (wires out of order – not consistent at both ends), reversals (one pair miswired), split pairs (wired correctly but using wrong conductor order and grouping). Any pair that fails is indicated with a red LED light for easy visual indication of a non-passing cable. Shield continuity can also be tested on shielded connectors and cables. Debug feature cycles through each pair so the user can see the pass/fail status of each pair one at a time. Single button operation simplifies the use of the LinkMaster ™ . Includes main test unit and remote unit. Includes 4 1.5V LR44 batteries for main unit. Remote does not require batteries. Features LED based wiremapper verifies cable continuity Identifies errors by pair: shorts, opens, miswires, reversals, and split pairs Tests for shield continuity; Voice/Data/Video LCD based wire mapper verifies cable continuity Designed for Cat 3/5/5e/6/6a cables RJ-45 interface for 8 conductor twisted pair cables Document Brochure

Description High performance 2.4 GHz Digital Splitters are used for splitting a single coax line into 2, 3, or 4 lines. These splitters are designed for applications that operate in the 5 MHz to 2.4 GHz range, which include: Satellite, Digital/HD Cable TV, Broadcast (over the air) TV, CCTV, and other general purpose coaxial cable splitting requirements. Splitters support the 1 Ghz to 2.4 GHz frequency range for satellite and on-demand cable television services. All ports on the 2.4 GHz splitters are power pass enabled. This allows any of the ports to be used to pass power from the satellite set top box to the satellite dish or multiswitch. All splitters include an internal printed circuit board design inside of a nickel plated zinc die cast housing which helps to improve overall splitter performance in return loss, insertion loss, and port-to-port isolation measurements, resulting in a stronger, cleaner signal with more protection from outside signal interference. All 2.4 GHz splitters have a solid, sealed body for improved EMI/RFI performance. Standoff design allows cables to be routed behind the splitter for tight installations. Machine formed threads on the F ports allow for smooth connector mating. Splitters include a grounding screw port for attaching ground wires and two user accessible mounting holes. For best system performance, choose a splitter with the minimum number of outputs for your application requirements. This minimizes attenuation/signal weakness to each of the ports and provides the strongest signal to each individual device. Install splitter as close as possible the devices receiving the split cables. This minimizes the length the split (attenuated) signal needs to travel. Use F-port terminator caps (85-073) on all unused splitter and wallplate ports to minimize signal reflections. Features Splits 1 input signal into 2 balanced output signals Designed for use in High Definition applications - Satellite/Digital Cable TV 5 MHz to 2.4 GHz bandwidth All ports are power-pass: 0.5 Amp DC; 60 Volt DC Max.; 12-18 Volt DC typical operation for LNB power. Internal printed circuit board for improved electrical performance Nickel plated zinc construction EMI/RFI shielding effectiveness: >-80dB Insertion loss: 4.4dB to 6.4dB over rated frequency range For 75Ω coaxial cable systems

Description IDEAL Keystone Jacks are high-performance modular jack connectors designed to exceed the CAT5e requirements giving installers the ability to use these products in residential and commercial installations for applications such as Gigabit Ethernet. Benefits 110 IDC style termination with internal PCB 100 MHz / 1Gb performance Keystone dimensions provide compatibility with other devices All jacks feature a robust internal printed circuit board design that helps reduce near-end-cross talk and improve RF performance at higher frequencies UL listed, RoHS compliant Technical Information Color: White Cable Type: CAT5e Termination Method: Punchdown Gender: Female Current Rating: 1.5 Amps Insulation Resistance: 50m ohm Contact Resistance: 20m ohm DC Resistance: 0.1 ohm Dielectric Withstanding Voltage: 1000V Documents Product Datasheet

Description Keep your Scout® Pro 3 tester, smart remotes and accessories safe with this durable polyester carrying case. Designed for use with the Scout® Pro 3 tester and the Test + Map™ remotes. This flexible case can accommodate various products and configurations. Cushioned foam insulates the tools during transport. Benefits Replacement case for Scout® Pro 3 Tester Remote Update Kit (Cat. No. VDV770-850) and Starter Kit (VDV501-853) Custom designed compartments hold tester and remotes securely Durable nylon withstands scratches and tears EVA foam cushions and protects equipment Dual zipper-pulls for quick access Flexible case can hold a variety of products and configurations Designed to hold Cat. Nos. VDV770-850, VDV501-853 (sold separately) Note: Products in photos not included Technical Information Type: Foam Cushioned Case Application: Scout® Pro 3 Tester and Remote Storage Special Features: Custom Designed Comparments Overall Length: 13'' (33 cm) Overall Height: 9'' (23 cm) Overall Width: 4.4'' (11 cm) Material: EVA Foam, Nylon Color: Black Closure Type: Zipper Total Cubic Area: 515 in³ Handle Material: Polyester Insulation: Die Cut Foam Insert Padding For Use With: Cable Tester Kits with Scout® Pro 3 Tester (Cat. Nos. VDV501-851 and VDV501-853) Weight: 2.2 lb (1 kg) UPC: 092644583476

Description Replacement Leads for the Digital Tone Generator (Cat. No. VDV500-163). Includes two integrated alligator clips with angled bed of nails (ABN) and one RJ45 cable. Features Replacement Leads for Digital Tone Generator (Cat. No. VDV500-163) Includes two integrated alligator clips with angled bed of nails (ABN), one for positive (red) and one for negative (black) Alligator clips easily attach and detach from the tone generator using banana clips Alligator clips include dust caps to prevent dirt and dust from getting into the banana clips Leads are made from 18 AWG wire Alligator clips measure 24-Inch (61 cm) from end to end Includes one RJ45 cable Technical Information Type: Replacement Leads Application: Wire Toning Special Features: Replacement Leads Overall Length: 9.1'' (23.1 cm) Overall Height: 13'' (33 cm) Overall Width: 0.8'' (2 cm) Material: Brass Included: (2) Alligator Clips with ABN, (1) RJ45 Cable Weight: 3.4 oz

Description Replacement tip for the Digital Tracing Probe (Cat. No. VDV500-223) traces wires on active and inactive networks. The tip is responsive, durable, non-metallic and conductive. Twist and lock tip to install, without the need for tools. Features Replacement tip for the Digital Tracing Probe (Cat. No. VDV500-223) Tool-less, twist-and-lock replaceable tip Responsive, durable, non-metallic, conductive tip Traces wires and cables on active and inactive networks when used with the Digital Tracing Probe (Cat. No. VDV500-223) To remove tip, turn counterclockwise a quarter turn and pull gently to remove Insert new tip with key in proper orientation and push gently Rotate a quarter turn clockwise to lock into place Technical Information Type: Replacement Tip Application: Wire Tracing Special Features: Replaceable Overall Length: 0.4'' (1 cm) Overall Height: 1.6'' (4.1 cm) Overall Width: 0.4'' (1 cm) Material: Polyamide Weight: 0.1 oz (3 g) Document

Description This custom easy access zipper pouch holds both the Tone and Probe PRO kit (Cat No.VDV500-820). The convenient padded divider keeps the tone generator (Cat No. VDV500-063) and tracing probe (Cat No.VDV500-123) separated. Additional padding adds extra protection. Durable nylon can withstand the most rigorous jobsite. Features Custom zipper pouch for convenient storage For use with the Tone and Probe PRO Kit (VDV500-820) Holds both the Tone-PRO (VDV500-063) and Probe-PRO (VDV500-123) - sold separately Padded divider keeps tools separate Padded outside for added protection 11.2-Inch x 5.9-Inch x 0.4-Inch Black with Klein Tools logo Technical Information Type: Replacement Pouch Application: Storage Special Features: Padded, Padded Divider Interior Pockets: 2 Number of Pockets: 2 Overall Length: 11.2'' (28.4 cm) Overall Height: 5.9'' (15 cm) Overall Width: 0.4'' (1 cm) Material: Nylon Color: Black Closure Type: Zipper Total Cubic Area: 2.3 cu ft (65.1 L) Insulation: No For Use With: Cat. Nos. VDV500-123, VDV500-063, and VDV500-820 Weight: 0.1 lb (0.05 kg) Document Brochure

Description Klein Tools Crimping and Cutting Tool is designed for crimping non-insulated solderless terminals and connectors. Wire cutter in nose specially hardened for durability. Tapered nose allows you to work in confined spaces. Features Crimper crimps non-insulated 10 to 22 AWG solderless terminals and connectors Cutting and Crimping Tool has specially hardened wire cutter in nose Tapered nose for working in confined spaces Made with plastic-dipped, cushioned handles for comfort and forged steel for maximum durability Made in USA Hot-riveted joint for smooth action and no handle wobble Technical Information Application: Crimps Non-Insulated Solderless Terminals and Connectors Special Features: Plastic-Dipped, Cushioned Handles Material: Forged Steel Jaw Material: Steel Cutting Capacity: 10-22 AWG Non-Insulated Terminals Crimping Capacity: 10-22 AWG Non-Insulated Terminals Handle Color: Black Handle Finish: Plastic-Dipped Overall Length: 9.6'' (24.4 cm) Weight: 13.6 oz (386 g)

Description Klein's patented universal sleeve technology connectors install up to 5x faster than other F compression connectors. Patented viewing windows in sleeve aid in proper seating. One connector fits all diameter variations within a cable series. This patented sleeve design provides the excellent holding power and signal strength you demand. Features Patented Universal Sleeve technology installs up to 2x faster than other compression connectors Patented viewing windows in sleeve aid in proper seating Fits most major brands of RG59 cable Fits multi-shield and plenum cables Solid brass construction with dark nickel plating Also available in a pack of 10 (Cat. No. VDV812-615) Technical Information Connector Type: F-Connector Cable Type: RG59 Crimping Type: Compression Package Quantity: 50 Document Instruction

Description Klein Tools' comprehensive line of innovative connectors provide excellent holding power and signal strength you require. These connectors are faster to install, more flexible and convenient to use saving time and money. Klein's connectors are professional-grade and include the quality you expect. Features The patented universal sleeve technology installs up to five times faster than ordinary coax compression connectors Fits most diameter variations within a cable series and difficult to work with multi-shield and plenum cables Provides excellent holding power and signal strength Patented viewing windows in sleeve aid in proper seating Professional-grade with premium quality, solid brass construction Elegant dark nickel-plated finish Technical Information Connector Type: F-Connector Cable Type: RG6/6Q Crimping Type: Compression Sleeve Color: Yellow/Nickel Outdoor Use: No Package Quantity: 50 Document Instruction

Description Exclusive Klein-designed CAT6A Pass-Thru™ modular plugs for fast, reliable connector installations for data applications. CAT6A shielded cable easily passes through connector for consistent and secure termination. Saves time, trims flush to end face when used with Klein Tools Pass-Thru™ Modular Crimper Cat. No. VDV226-110, and eliminates wasted materials. Features Klein exclusive Pass-Thru™ Connectors provide fast, reliable connector installations for data applications For CAT6A shielded cable and larger diameter/thicker jacket CAT6 cable CAT6A cable easily passes through connector to visually ensure that wires are in the correct order for consistent and secure terminations Fully compliant with Power Over Ethernet (PoE and PoE+) standards Requires pass-through type crimping tool (Cat. No. VDV226-110 recommended) 8 position, 8 contact pass-through type data plugs for solid or stranded wire Category 6A performance per TIA/EIA-568-B.2 100-Pack 50 µ-inch gold plating on all contact surfaces Max diameter for CAT6A Pass-Thru™ Connectors is 0.043-Inch (1.1 mm) Technical Information Type: Modular Application: Data Special Features: Pass-Thru™ Technology; Meets All PoE+ Standards Overall Length: 0.8'' (2 cm) Overall Height: 0.6'' (1.5 cm) Overall Width: 0.4'' (1 cm) Material: PVC Plastic; Gold Plated Contacts Connector Type: RJ45 Cable Type: CAT6A STP and Larger Diameter CAT6 Position & Contacts: 8P 8C Connector Color: Clear Solid Conductor Wire: Yes Stranded Conductor Wire: Yes Package Quantity: 100 Weight: 10.21 oz (289 g) Document Brochure Instruction

Description Exclusive Klein-designed CAT6A Pass-Thru™ modular plugs for fast, reliable connector installations for data applications. Cable easily passes through connector for consistent and secure termination. Saves time, trims flush to end face when used with Klein Tools Pass-Thru™ Modular Crimper Cat. No. VDV226-110, and eliminates wasted materials. Features Klein exclusive Pass-Thru™ Connectors provide fast, reliable connector installations for data applications For CAT6A cable and larger diameter/thicker jacket CAT6 cable CAT6A cable easily passes through connector to visually ensure that wires are in the correct order for consistent and secure terminations Fully compliant with Power Over Ethernet (PoE and PoE+) standards Requires pass-through type crimping tool (Cat. No. VDV226-110 recommended) 8 position, 8 contact pass-through type data plugs for solid or stranded wire Category 6A performance per TIA/EIA-568-B.2 200-Pack 50 µ-inch gold plating on all contact surfaces Max diameter for CAT6A Pass-Thru™ Connectors is 0.043-Inch (1.1 mm) Technical Information Type: Modular Application: Voice and Data Special Features: Pass-Thru™ Technology; Meets All PoE+ Standards Overall Length: 0.875'' (2.2 cm) Overall Height: 0.453'' (1.2 cm) Overall Width: 0.094'' (0.2 cm) Material: PVC Plastic; Gold Plated Contacts Connector Type: RJ45 Cable Type: CAT6A UTP and Larger Diameter CAT6 Position & Contacts: 8P 8C Connector Color: Clear Solid Conductor Wire: Yes Stranded Conductor Wire: Yes Package Quantity: 200 Weight: 9.34 oz (265 g) Document Brochure Instruction

Description The 33-508 Twisted Pair Termination Hip Kit includes the necessary tools to cut, strip and terminate RJ-45, 8P8C modular plugs to twisted pair cabling or punch down conductors to modular jacks. This compact kit contains the core hand tools needed for working with twisted pair cabling. The tools in the kit are designed to work together with CAT5e, CAT6 and CAT6A cabling. The FT-45 ™ crimp tool is a compact, lightweight crimper that provides a flush cut on IDEAL Feed-Thru modular plugs. It is also compatible with standard (non-Feed-Thru) and shielded connectors. The Punchmaster ™ II Impact Punch Down Tool is a spring-loaded tool with selectable impact force to seat and cut conductors to modular jacks or data racks. The PrepPRO stripper utilizes a fixed depth blade to score the jacket of twisted pair cable without nicking the inner conductors. Scissors are included for cutting off old connector ends and trimming the cable or conductors to size. The pouch includes a clip to attach the kit to a tool bag or belt and keeps the termination tools together in one compact space. Features Tool installation kit for terminating both RJ-45 modular plugs and modular jacks to twisted pair cable Includes FT-45 ™ Feed-Thru Modular Plug Crimp Tool (30-495), Punchmaster ™ II Punch Down Tool (35-485), PrepPRO ® stripper (45-605), scissors (35-088) and pouch with clip Crimps standard, Feed-Thru and shielded CAT5e, CAT6 and CAT6A modular plugs Impact punch down tool for 110 data jacks or panels and 66 blocks Spare slot in pouch to hold 35-485 Punch Down Tool

Description The IDEAL family of Feed-Thru products has expanded to include two new modular plug connectors. Available in a shielded or unshielded model, these single piece 8P8C RJ-45 connectors are designed to work with cable conductors ranging from 22 to 24 AWG solid with an overall diameter of 0.040” - 0.048” per conductor. The single piece Feed-Thru design simplifies the challenges faced when assembling and terminating twisted pair cables with larger diameter conductors, over 0.041”, when use of a standard in-line connector is not an option. A unique staggered conductor hole layout and multi-length contact pins are incorporated to accommodate the larger conductors. The single-piece housing design helps to funnel the conductors through the connector and out of the Feed-Thru end. No precision length trimming, load bars or multi-piece assemblies are required. The connectors are then terminated with the FT-45 ™ Modular Plug Crimp Tool. The FT-45 ™ Crimp Tool does not require any adjustments or blade changes to use these connectors. The shielded connector is designed for 0.040” through 0.048” insulated conductors which are typically found in CAT6A, CAT6, and CAT5e shielded cables. The unshielded connector handles the same range, but is used primarily for CAT6A and thicker CAT6 unshielded cables. For twisted pair cables with maximum conductor diameters of 0.41” or less, we recommend using the in-line versions of our CAT5e or CAT6 Feed-Thru connectors. Feature Feed-Thru Modular Plug For insulated conductors of 0.040" - 0.048" diameter CAT6A/6 shielded cable compatible for above diameter range Max jacket diameter of .320" Staggered pin and conductor design Crimp with FT-45 ™ 30-495 tool 50 micron gold plated contact area UL Listed E512035 Technical Information Quantity: Card of 50 Cable Type: CAT6A Termination Method: Crimp Document Catalogue Brochure

Description IDEAL’s Feed-Thru solution gives you the ability to quickly and accurately terminate twisted-pair cabling. Simply Strip and Crimp the cable. First, use IDEAL’s PrepPro ® Stripper which cleanly scores the cable jacket without nicking inner conductors. Just insert cable and twist! Then, align conductors and feed-thru the single-piece modular plugs - you’ll be able to verify the wires are in the correct order prior to crimping. Finally, use the FT-45 ™ tool to crimp and cleanly shear the conductor ends with one squeeze. Using IDEAL’s Feed-Thru solution you’ll be able to install unshielded and shielded feed-thru connectors on CAT 5e, CAT 6 and 6a cables with ease! Features Single piece, feed-thru design that simplifies the challenges of assembling and terminating twisted pair cables Designed for use with CAT6 / CAT6A cable with inner-conductor diameters up to 0.048” Integrated strain-relief Compatible with IDEAL's FT-45 ™ Crimping Tool, which crimps and cleanly shears conductors in one-step. This tool works with ALL our feed-thru and standard connectors (Part number: 30-495) Flush cut of excess conductors minimizes inadvertent contact outside of the plug

Description IDEAL’s Feed-Thru solution gives you the ability to quickly and accurately terminate twisted-pair cabling. Simply Strip and Crimp the cable. First, use IDEAL’s PrepPro ® Stripper which cleanly scores the cable jacket without nicking inner conductors. Just insert cable and twist! Then, align conductors and feed-thru the single-piece modular plugs - you’ll be able to verify the wires are in the correct order prior to crimping. Finally, use the FT-45 ™ tool to crimp and cleanly shear the conductor ends with one squeeze. Using IDEAL’s Feed-Thru solution you’ll be able to install unshielded and shielded feed-thru connectors on CAT 5e, CAT 6 and 6a cables with ease! Features Single piece, feed-thru design that simplifies the challenges of assembling and terminating twisted pair cables Designed for use with CAT6 / CAT6A cable with inner-conductor diameters up to 0.048” Integrated strain-relief Compatible with IDEAL's FT-45 ™ Crimping Tool, which crimps and cleanly shears conductors in one-step. This tool works with ALL our feed-thru and standard connectors (Part number: 30-495) Flush cut of excess conductors minimizes inadvertent contact outside of the plug

Description The 85-365 shielded Feed-Thru CAT5e modular plug simplifies cable to connector assembly by allowing the wires to feed-thru the front end of the connector after cable insertion allowing the user to verify the conductors are in the correct order before crimping the connector. The 85-365 has an attached metal shell that is designed to provide a continuous path for the cable shielding to pass through the connector and into the device's shielded port. The connector has internal shield connection points on the top and bottom of the connector for cable foil or drain wire to make contact within the plug. The plugs are compatible with shielded or unshielded CAT5e cables with conductors that have a maximum insulated diameter of 0.041". The single piece design uses a feed-thru style cable preparation leaving about 1" of conductors exposed to feed-thru the plug prior to termination. An additional step requires the foil be folded back over the jacket, or drain wire wrapped, to ensure conductivity with the plug shield. This connector is compatible with the IDEAL 30-495 modular plug crimping tool, or the 33-507 and 33-508 Hip Kits. Features Feed-Thru style simplifies assembly and verification of correct wire order Internal shield design for contact with cable foil or drain wire For shielded cables with a maximum insulated conductor diameter of 0.041" 8-position, 8-contact RJ-45 with 50 micron gold plated pin contacts Max recommended outer cable diameter of 0.260" Document Instruction

Description High performance 2.4 GHz Digital Splitters are used for splitting a single coax line into 2, 3, or 4 lines. These splitters are designed for applications that operate in the 5 MHz to 2.4 GHz range, which include: Satellite, Digital/HD Cable TV, Broadcast (over the air) TV, CCTV, and other general purpose coaxial cable splitting requirements. Splitters support the 1 Ghz to 2.4 GHz frequency range for satellite and on-demand cable television services. All ports on the 2.4 GHz splitters are power pass enabled. This allows any of the ports to be used to pass power from the satellite set top box to the satellite dish or multiswitch. All splitters include an internal printed circuit board design inside of a nickel plated zinc die cast housing which helps to improve overall splitter performance in return loss, insertion loss, and port-to-port isolation measurements, resulting in a stronger, cleaner signal with more protection from outside signal interference. All 2.4 GHz splitters have a solid, sealed body for improved EMI/RFI performance. Standoff design allows cables to be routed behind the splitter for tight installations. Machine formed threads on the F ports allow for smooth connector mating. Splitters include a grounding screw port for attaching ground wires and two user accessible mounting holes. For best system performance, choose a splitter with the minimum number of outputs for your application requirements. This minimizes attenuation/signal weakness to each of the ports and provides the strongest signal to each individual device. Install splitter as close as possible the devices receiving the split cables. This minimizes the length the split (attenuated) signal needs to travel. Use F-port terminator caps (85-073) on all unused splitter and wallplate ports to minimize signal reflections. Features Splits 1 input signal into 3 balanced output signals Designed for use in High Definition applications - Satellite/Digital Cable TV 5 MHz to 2.4 GHz bandwidth All ports are power-pass: 0.5 Amp DC; 60 Volt DC Max.; 12-18 Volt DC typical operation for LNB power. Internal printed circuit board for improved electrical performance Nickel plated zinc construction EMI/RFI shielding effectiveness: >-80dB Insertion loss: 4.4dB to 6.4dB over rated frequency range For 75Ω coaxial cable systems

Description IDEAL CAT5e 8P8C (eight position/eight contact) modular plug connectors (10/Pack) which support TIA/EIA standards for twisted pair cabling up to 100 MHz. IDEAL modular plugs are designed to work seamlessly with the IDEAL Telemaster and FT-45 series of modular plug crimp tools. Plugs are designed and manufactured to support all 100 cable wiring schemes including the widely used TIA-568A and TIA-568B configurations. IDEAL modular plugs are manufactured to strict industry standards and tolerances that utilize traditional preparation and termination methods. These proven and preferred methods allow for improved compatibility among manufacturers and devices around the world without the need for special tooling or preparation methods and eliminate the risk of shorts and crosstalk often associated with open end or feed through type connectors. Features 8 position, 8 contact RJ-45 modular plug for CAT5e, 100 balanced twisted pair 100 MHz cables 50 micro-inch gold plating on contact mating area for long term reliability in connectivity, even after hundreds of mating cycles Complies with industry standard mechanical and electrical specifications for compatibility with compliant modular jacks and ports Designed to work seamlessly with IDEAL Telemaster crimping tools. Also compatible with industry standard modular plug crimping tools meeting specifications. Three prong contact design for use with solid or stranded 24-26 AWG insulated copper conductors. Max conductor diameter of 0.042"/1.07mm. Max recommended cable outer jacket diameter 0.270"/ 6.8mm. Permanent connection - once crimped they cannot be reused Primary and secondary strain relief supports to retain cable jacket and minimize conductor movement once crimped Non-feed through design to prevent external conductor/device shorting and RF signal leakage Document Brochure

Description High performance 1 GHz Digital Splitters are used for splitting a single coax line into 4 lines. These splitters are designed for applications that operate in the 5 MHz to 1 GHz range, which include: Digital/HD Cable TV, Broadcast (over the air) TV, CCTV, and other general purpose coaxial cable splitting requirements. All splitters include an internal printed circuit board design inside of a nickel plated zinc die cast housing which helps to improve overall splitter performance in return loss, insertion loss, and port-to-port isolation measurements, resulting in a stronger, cleaner signal with more protection from outside signal interference. All 1 GHz splitters have a soldered back (not glued) for improved EMI/RFI performance. Machine formed threads on the F ports allow for smooth connector mating. Splitters include a grounding screw port for attaching ground wires and two user accessible mounting holes. For best system performance, choose a splitter with the minimum number of outputs for your application requirements. This minimizes attenuation/signal weakness to each of the ports and provides the strongest signal to each individual device. Install splitter as close as possible the devices receiving the split cables. This minimizes the length the split (attenuated) signal needs to travel. Use F-port terminator caps (85-073) on all unused splitter and wallplate ports to minimize signal reflections. Features Splits 1 input signal into 4 balanced output signals Designed for use in Digital Cable TV and standard coax splitting applications 5 MHz to 1 GHz bandwidth Internal printed circuit board for improved electrical performance Nickel plated zinc construction EMI/RFI shielding effectiveness: >-120dB Insertion loss: 7dB to 8dB over rated frequency range For 75Ω coaxial cable systems For splitters requiring power pass ports, see the 2.4 GHz splitter section

Description High performance 1 GHz Digital Splitters are used for splitting a single coax line into 3 lines. These splitters are designed for applications that operate in the 5 MHz to 1 GHz range, which include: Digital/HD Cable TV, Broadcast (over the air) TV, CCTV, and other general purpose coaxial cable splitting requirements. All splitters include an internal printed circuit board design inside of a nickel plated zinc die cast housing which helps to improve overall splitter performance in return loss, insertion loss, and port-to-port isolation measurements, resulting in a stronger, cleaner signal with more protection from outside signal interference. All 1 GHz splitters have a soldered back (not glued) for improved EMI/RFI performance. Machine formed threads on the F ports allow for smooth connector mating. Splitters include a grounding screw port for attaching ground wires and two user accessible mounting holes. For best system performance, choose a splitter with the minimum number of outputs for your application requirements. This minimizes attenuation/signal weakness to each of the ports and provides the strongest signal to each individual device. Install splitter as close as possible the devices receiving the split cables. This minimizes the length the split (attenuated) signal needs to travel. Use F-port terminator caps (85-073) on all unused splitter and wallplate ports to minimize signal reflections. Features Splits 1 input signal into 3 balanced output signals Designed for use in Digital Cable TV and standard coax splitting applications 5 MHz to 1 GHz bandwidth Internal printed circuit board for improved electrical performance Nickel plated zinc construction EMI/RFI shielding effectiveness: >-120dB Insertion loss: 7dB to 8dB over rated frequency range For 75Ω coaxial cable systems For splitters requiring power pass ports, see the 2.4 GHz splitter section

Description Klein Tools' Coax Combination Radial Stripper works on both standard and utility size cables. The durable, high-carbon steel cutting blades automatically adjusts to the different cable diameters. Klein's exclusive sliding depth gauge pre-measures cable for fast, accurate and repeatable stripping every time. Benefits Durable high-carbon steel cutting blades automatically adjust to different cable diameters Complete 2-level cable prep/stripping in one step to 5/16-Inch and 1/4-Inch (7.9 mm and 6.4 mm) It preps/strips five different series of RG cables including: RG59, RG6, RG6Q, RG11 and RG7 Easy debris clean-out Finger loop facilitates easy, controlled rotation Perfect for the data installer who works with utility cable as well standard cable Technical Information Type: Radial Stripper Application: Cable Preparation Cable Type: RG59, RG6/6Q, RG7, RG11 Levels: 2 Strip Dimensions: 0.3125'' and 0.250'' Overall Lenght: 5.25'' (13.3 cm) Handle Color: Yellow/Gray Weight: 1.5 oz (43 g)

Description An all-in-one basic Voice-Data-Video tester for verifying proper wiring of low-voltage and data communications cables. The primary function of the VDV is the wiremap test. The wiremap test visually shows, pin by pin, whether a cable is terminated properly at both ends and if there is continuity from end to end. The VDV can test Data/Ethernet RJ-45 (8P8C), Voice/Phone RJ-11/12(6P6C/6P4C), and Video/coax cables. The LCD visually displays “PASS” or “ERROR” after each test to verify if the cable is terminated correctly. Benefits Voice/Data/Video LCD based wire mapper verifies cable continuity Identifies errors by pin: shorts, opens, miswires, reversals, and split pairs For twisted pair, coax, and phone type cables Designed for Cat 3/5/5e/6/6a cables; RG59/6/ 6 Quad RJ-45; RJ-11/12; and Female F port interfaces Tone generator with 4 selectable tones Includes main remote and 9V battery Technical Information Product Datasheet Operating Instructions Brand: Ideal Cable Composition: Coax Tester Function: Wiremap