Items Not in Stock

Description The LUNA 4" fixture, is a 12 watt, recessed light fixture for retrofit, remodel or new construction applications with 360-degree rotation and 30-degree tilt. It is a high-performance, easy to install residential grade downlight solution that offers good light output, energy-efficiency and streamlined design. Suitable for wet locations. Available here in a 4-pack with an OnCloud dimmer for Wi-Fi control through the WiZ app to create scenes, set schedules and connect with smart speakers. ***The On Cloud Dimmer only works for single pole applications.*** Features Durable airtight aluminum body with adjustable regressed gimbal. Includes anodized blue heat sink to provide maximum airflow for the LED light source General application light fixture featuring a 12 watt LED module that maintains uniform intensity producing up to 700 lumens, with a typical CRI of 90 Available in 3000k color temperatures 100%-10% dimming capability. This fixture is compatible with industry standard forward-phase / reverse-phase and TRIAC/ELV dimmers Fixture lens provides 38° beam spread Includes two spring loaded clips to attached to any ceiling material Extruded aluminum hardwire box with 300mA dimmable class II electronic LED driver with 100-135V AC input. Includes an 18" FT6 rated cable with DC 2.1 connector between driver and fixture approved for use in plenums and suspended ceilings Three "quick connect" push-in terminals for fast and easy wiring Operating Temperature from -20°C to 40°C (-4°F to 104°F) Suitable for wet locations Approved for direct contact with insulation Technical Information Application: Ceiling Recess Mount Approved Location: Wet / Insulated Ceilings Beam Angle: 38° CCT: 3000 K to 2000 K Certification: cETLus Class II: Yes Colour: White CRI: 90 Dimming: Yes Dimming Tech: Forward/reverse-phase - TRIAC/ELV Energy Star: Yes Hole Cut: Ø 4¼ " (108mm) Input: 100-135V AC, 60Hz Lumens: Up to 700 Lumens per Watt: Up to 59 Power Factor: 0.9 Projected Life: 70% @ 50,000 hrs Warranty: Lifetime Wattage: 12W Document Brochure Specification Sheet

Description Klein Tools Rechargeable Hard Hat Wide-Beam Headlamp and modular battery attaches directly onto Klein Hard Hats and Safety Helmets via Klein mounts; Offering up to 700 lumens of bright light, this unique headlamp features tilt adjustment and easy mounting to magnetic battery for use as worklight for added versatility. Benefits Rechargeable Wide-Beam Headlamp easily mounts directly to Klein Hard Hat and Safety Helmet accessory mounts Wrap around low-profile design for use in tight spaces FL1 rated All-on-High: 770 lumens, 5 hr; All-on-Medium: 540 lumens, 7 hr; All-on-Low: 270 lumens, 10 hr; Focus-High: 400 Lumens, 8 hr; Focus-Low: 150 Lumens, 12 hr 1300-Foot beam distance coverage on All-on High setting Wide and focus beam modes for large area coverage or narrow area when working near others Removable rechargeable battery ( Cat. No. 29025) with LED gauge can be replaced with a spare to extend run time Headlamp can mount onto magnetic battery for use as a work light Headlamp pivots to allow use in different lighting angles Drop and ingress protection tested for use in outdoor and demanding jobsite environments Marker/Pencil holder included for quick and convenient access to marking tools Technical Information Type: Rechargeable Wide-Beam Headlamp with Hard Hat Mount Application: Headlamp and Worklight Special Features: Wide LED Array, Tilt Adjustment, Magnet Overall Length: 6.18'' (15.7 cm) Overall Height: 2.02'' (5.1 cm) Overall Width: 1.84'' (4.7 cm) Material: ABS Bulb Type: LED Lumens: Center High: 400; Center Low: 150; All-On High: 770; All-On Med: 540; All-On Low: 270 Battery Life: Center High: 8 hr; Center Low: 12 hr; All On High: 5 hr; All On Med: 7 hr; All On Low: 10 hr Batteries: Lithium-Ion Temperature Range: Operating Temperature: -4° to 122°F (-20° to 50°C); Charging Temperature: 32° to 113°F (0° to 45°C); Storage Temperature: (up to 3 months): -4° to 113°F (-20° to 45°C) Drop Protection: 6.6' (2m) Standard: NR Can, REACH, RoHS, CEC/DOE Included: Rechargeable Battery Weight: 1.9 oz (54 g) UPC: 092644563096 Documents Brochure Instruction

Description The 9-in-1 Impact-Rated Flip Socket Set provides 8 Hex nut driver sizes and a 1/4-Inch bit holding feature in one tool. The versatility provided allows for convenient swapping between common nut driving sizes and quickly attaches to an impact driver or our 1/4-Inch quick-connect handles (handles not included). Every component is impact rated, making it an essential tool for the toughest driving applications. Features Impact-Rated Flip Socket Set includes 4 flip sockets and a 1/4-Inch bit holding feature for quick access and convenience to common sizes 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, and 3/4-Inch hex sizes Rare-Earth magnet to retain hex fasteners for convenient and easy driving Flip sockets can be stored in any order or orientation on the shaft Color coded hex sizes for easy identification Shaft and sockets are impact-rated and designed for heavy-duty applications Klein quick-connect handle easily connects to shaft for convenience on the jobsite (handle not included) Technical Information Type: Flip Socket Application: Fastening; Impact Driving Special Features: 1/4'' Bit Holding; Multi-Bit Nut Driver; Impact Rated; Flip Socket; Rare Earth Magnet Overall Length: 1.02'' (2.6 cm) Overall Height: 6.7'' (17 cm) Overall Width: 1.02'' (2.59 cm) Material: Steel Alloy Drive Size: 1/4'' Socket Size: 1/4'', 5/16'', 3/8'', 7/16'', 1/2'', 9/16'', 5/8'', 3/4'' Hex Number of Points: 6 Weight: 7.36 oz (209 g) UPC: 092644329340 Document Brochure

Description The Klein Tools' Red Pocket Laser Level is a high-performance laser leveling and alignment tool for DIY'ers and professionals alike. The powerful red laser line is easy to see and use in all lighting conditions. The adjustable body and 3-axis lighted bubble vials allow a user to project laser lines at any angle the user needs. The fine adjust knobs enable easier precision adjustments than other laser levels. Features Projects single red laser line up to 30 feet (9.1 m) indoors, providing ample coverage for a wide range of applications Laser body has a 360-Degree rotation for projecting lines at any angle Horizontal and vertical fine adjust knobs allow for easier precision adjustment of the laser line without having to move the unit Compact design is easy to use and transport at home, on the job, or anywhere in between 3-axis bubble vials illuminate for enhanced viewing and leveling Two powerful magnets, 1/4-20 thread tripod mounting, a hang hole, and built-in kickstand give a variety of mounting options Over 12-Hour runtime with 2 AAA alkaline batteries and low battery warning Technical Information Type: User Adjustable Pocket Laser Level Application: Leveling Alignment Tool Special Features: Embedded Kickstand, 3-Axis Vials, Fine Adjust Knobs Material: Resins, Elastomers, Metallic Batteries: 2 x AAA Laser Wavelength: 630-640nm Laser Safety: IEC 60825-1:2014/A11:2021, EN 50689:2021 Number of Beams: 1 Laser Color: Red Plumb Laser: No Indoor Range: 30' (9.1 m) Outdoor Range: 30' (9.1 m) Maximum Distance: 30' (9.1 m) Display: No Number of Vials: 3 Type of Vials: Lighted Bubble Accuracy: Vials; 0.043-Degree (0.75mm/1,000mm) Pulse Mode: No Receiver: No Magnet Type: Rare Earth - Neodymium Drop Protection: 3' (1 m) Ingress Protection: IP54 Transit Locking Mechanism: No Low Battery Alarm: Yes Low Battery Indicator: Yes Out-of-Level Indicator: No Standard: Complies with 21 CFR 1040.10 and 1040.11 Except for Conformance with IEC 60825-1 Ed. 3., as Described in Laser Notice No. 56, Dated May 8, 2019 Mounting Type: Magnetic Bracket Bag or Case: No Included: Batteries, Manual Overall Length: 4.27'' (10.8 cm) Overall Height: 2.3'' (5.8 cm) Overall Width: 1.76'' (4.5 cm) Weight: 6.6 oz (186 g) Battery Life: 12 hr Document Brochure

Description This 20-Piece impact socket set features (10 SAE and 10 Metric) sizes combined into 10 color-coded sockets. Each impact flip socket features two coaxial spring-loaded sockets in one. Set includes Nested adapters for dual drive (1/4-Inch hex flip socket shaft nest into 3/8-Inch square drive adpater). Also comes with a Compact, modular storage system with a clear lid that is compatible with MODbox™ and stackable with other cases of its similar design. Features Multi-purpose adapter makes the sockets compatible with the Klein KNECT™ system for unlimited driving potential Deep Well Impact Flip Socket Set includes 20 SAE and metric sizes combined into 10 color-coded sockets plus two nested adapters and one extended shaft Set includes 1/4 x 5/16, 3/8 x 7/16, 1/2 x 9/16, 5/8 x 3/4, and 11/16 x 13/16 inch socket sizes and 8 x 10, 9 x 11, 12 x 14, 13 x 15, and 16 x 18mm socket sizes Six smaller sockets sizes 1/4-Inch to 9/16-Inch ( 8 to 14mm) are stackable on 650QSAL to quickly change socket sizes and reduce the number of tools needed Klein KNECT™ specialized square drive adapter compatible with Klein Tools pass through socket wrench (Cat. No. 65400) and any 3/8-Inch square drive ratchet Small parts storage tray inside the case to secure loose fasteners, washers and extra bits Compact, modular storage system with a clear lid is compatible with MODbox™ and stackable with other cases of its similar design Technical Information Type: Socket Set Application: Hex Driving Special Features: Flip Feature, Nested Adapter Overall Length: 9.25'' (23.5 cm) Overall Height: 1.63'' (4.1 cm) Overall Width: 5.25'' (13.3 cm) Material: Impact-Rated Steel Drive Size: 1/4'', 3/8'' Socket Size: 1/4'', 5/16'', 3/8'', 7/16'', 1/2'', 9/16'', 5/8'', 11/16'', 3/4'', 13/16'' Number of Pieces: 13 Standard: SAE, Metric Included: (10) Sockets, (2) Adapters, Case Weight: 2.69 lb (1.2 kg) UPC: 092644652394

Description This product evens out a room's temperature and saves energy by recirculating warm air from the ceiling and mixing it with the cooler air in the room. Available in various wattages and voltages, the DRAGON DRI can be surface mounted in residential or commercial buildings with suspended ceilings that are at least eight feet. Features Ideal for the garage, stairwell, warehouse and workshops Fast temperature rise through heat recovery Wide range of powers Superior performance nichrome alloy elements Surface-mounted Quiet helicoidal fan Thermal protection with automatic reset Totally enclosed, permanently lubricated motor Requires a wall thermostat (Good up to 5000 Watts) Technical Information Color: White Finish: Epoxy-Polyester Powdercoat Mounting Heights: 10 ft Power: 5000 Watts Voltage: 240 Volts Air Flow: 450 CFM Warranty: 3 Years Document Specification Sheet User's Manual

Description The Caseta Outdoor Smart Plug is IP66-rated, which means it is protected against dust, dirt, and even the most severe rainfall. Cords on both ends of the plug fully seal the water out, also making the Caseta Outdoor Smart Plug the first outdoor smart plug with a polymer core that fully protects its internal electronics. It is built to last, rated to withstand temperatures from -4 to 122 F, and its black, polycarbonate body delivers long-term durability and UV resistance. Smart home - meet your smart yard. With the Caseta Smart Bridge (L-BDG2-WH, sold separately), you can toss your traditional timer - effortlessly schedule and control your outdoor lights year-round, without any need for manual adjustments. The plug will not lose its place as the sun rises and sets, as the seasons change, and as you gain or lose an hour with Daylight Savings. The plug is perfect for landscape lighting, patio string lighting/holiday lights (1,000s of ft of LED and 100s of ft of incandescent), as well as inflatables, and small pumps and motors (up to ½ HP). You can also add a Caseta Smart Bridge (sold separately) to unlock smart control of your Outdoor Smart Plug. The Plug works with Alexa, the Google Assistant, Apple HomeKit, Ring, and more. Control the plug in a variety of ways, via your preferred voice assistant, the Lutron app, or a Pico remote (sold separately). Features MEET YOUR SMART YARD: Experience the delight of returning to a home alive with light; perfect for patio string lights, landscape lights, holiday lights (up to 1,000 ft), pond or fountain pumps, and more BUILT TO LAST: Polycarbonate body, and fully protected internal electronics, make for a smart outdoor plug that just works – year after year WEATHERPROOF+: IP65 rated; built to protect against even the most severe rainfall, dust, and dirt CONTROL YOUR WAY: Caseta puts the smarts in the switch so you can control your lights a variety of ways – via the free Lutron app, your voice, with a wireless Pico remote, or from the switch itself (smart bridge, L-BDG2-WH, required; Pico sold separately) ULTRA-RELIABLE AND ULTRA-FAST: Uses Clear Connect technology (not Wi-Fi), so your connection is strong and responsive, and avoids issues like WiFi drop out and lag (smart bridge required) WORKS WITH: Add a smart bridge (L-BDG2-WH) to use with Alexa, Google Assistant, Apple HomeKit, Ring, and more TOSS THE TIMER: Unlike traditional timers, the outdoor smart plug stays on the right time year-round, even as the seasons change and with Daylight Savings (bridge required) Document User's Manual Brochure

Description Heavy Duty Hinged Knee Pads from Klein Tools provide a durable, comfortable knee pad solution for the most rugged and tough environments. The gel and foam padded pockets maximize pressure distribution for ultimate comfort. While the large, rounded knee pad surface offers stability and agility when moving side to side for the best on the job performance. Quick-fasten buckle and hook and loop strap on top hinge and bottom ensure a secure fit. Perfect for jobsites requiring all-day heavy duty knee protection. Features Heavy Duty Hinged Knee Pads contain a gel and foam padded pocket to maximize pressure distribution for all day comfort Large knee pad surface provides stability and rounded edges provide agility when moving side to side Hinged thigh strap keeps knee pads in place during use Adjustable quick-fasten buckle plus hook and loop strap provides secure fit Heavy duty stitching, hard plastic, and metal rivets for durability Perfect for jobsites that require heavy duty protection for the knees Sold in pairs Technical information Type: Heavy Duty Hinged Knee Pad Application: Knee Protection Special Features: Hinged Thigh Strap Overall Length: 14.3'' (36.3 cm) Overall Height: 5.8'' (14.7 cm) Overall Width: 7'' (17.8 cm) Material: 25% PE, 15% TPE, 15% Polyester 10% PU, 10% EVA, 10% Neoprene, 5% Nylon, 5% Iron, 5% Natural Rubber Latex Closure Type: Quick-Fasten Buckle Weight: 1.63 lb (0.74 kg) Document Brochure

Description The 6-in-1 Impact-Rated Flip Socket Set provides 6 hex nut driver sizes in one tool. The versatility provided allows for convenient swapping between sizes and quickly attaches to an impact driver or our 1/4-Inch quick-connect handles (handles not included). Every component is impact rated, making it an essential tool for the toughest driving applications. Features Impact Rated Flip Socket Set includes 3 flip sockets for quick access and convenience to common sizes 7, 8, 10, 12, 13 and 14mm hex sizes Rare-Earth magnet to retain fasteners for convenient and easy driving Color coded hex sizes for easy identification Flip sockets can be stored in any order or orientation on the shaft Shaft and socket are impact rated and designed for heavy-duty applications Klein quick-connect handle easily connects to shaft for convenience on the jobsite (handle not included) Technical Information Type: Flip Socket Application: Fastening; Impact Driving Special Features: Multi-Bit Nut Driver, Impact Rated; Flip Socket; Rare Earth Magnet, Metric Sizes Overall Length: 0.76'' (1.9 cm) Overall Height: 5.08'' (12.9 cm) Overall Width: 0.76'' (1.9 cm) Material: Steel Alloy Finish: Manganese Phosphate Drive Size: 1/4'' Socket Size: 7 mm, 8 mm, 10 mm, 12 mm, 13 mm, 14 mm Number of Points: 6 Case Included: No Included: (3) Flip Sockets Number of Pieces: 4 Weight: 4.32 oz (122 g) UPC: 092644326967 Document Brochure

Description Klein Tools' 8 Pocket Tool Pouch keeps tools where they are needed, when they are needed. This pouch is great for carrying a variety of tools for everyday jobs. Attaches to any belt up to 2.5-Inch wide and seamlessly connects to Klein's MODbox™ Mobile Workstation for easy storage and accessibility. Features 8-Pocket tool pouch easily attaches to and releases from any 2.5-Inch belt Easily exchange tool and part pouches by attaching and releasing from belt clip or MODbox™ rail system for additional storage Pivoting 30-Degree clip design allows for pouch to move with you to keep contents upright Includes one belt clip 8 pockets to carry a variety of tools including a tape loop Made of heavy-duty 1680d material Note: Tools sold separately Technical Information Type: Tool Pouch Application: Tool Carrying Number of Pockets: 8 Special Features: Easily Attaches and Releases from Tool Belts or MODbox™ Rail System Material: 1680d Belt Connection: Clip Belt Width: 2.5'' (6.4 cm) Overall Length: 8'' (20.3 cm) Overall Width: 3.5'' (8.9 cm) Overall Height: 12.75'' (32.4 cm) Color: Black Insulation: No Included: 8-Pocket Tool Pouch; Belt Clip For Use With: Tool Belts up to 2.5'' Wide and MODbox™ Rail System Weight: 1 lb (0.45 kg) Document Brochure

Description The Klein Tools Digital Angle Gauge with Angle Alert can measure or set angles, check relative angles, or be used as a digital level. Users can set defined angles easily and quickly. The Angle Alert features uses LEDs and a buzzer to notify the user when their desired angle is reached without looking at the screen. The strong magnetic base attaches to ferromagnetic surfaces such as conduit. The Digital Angle has dual measurement ranges of 0 to 90-Degree and 0 to 180-Degree and also has a high visibility reverse contrast display for easy viewing. Features This Digital Angle Gauge can measure or set angles, check relative angles with zero calibration feature, or can be used as a digital level LEDs light up red, orange, or green based on how close the device's orientation is to the user defined angle Bright reverse contrast display is easy to see in all lighting conditions Strong magnetic base attaches to conduit, pipes, saw blades, vents, ducts, and other ferromagnetic surfaces V-Grooves ensure a secure fit on the contours of conduit or pipe Display auto-rotates when upside-down for easy viewing Water and dust resistant with rating of IP54 Technical Information Type: Digital Level Application: Measure or Set Angles, Check Relative Angles, or Use as a Digital Level Special Features: 3 Color LED Alerts, V-grooves On Top and Bottom Faces, Dual Measurement Ranges at 0° to 90° and 0° to 180°, Reverse Contrast Material: PC/ABS Plastic Housing, TPR, PET and Electronic Components Magnet Type: Permanent Rare-Earth Accuracy: 0.1⁰ from 0⁰ to 1⁰ , 89⁰ to 91⁰, 179⁰ to 180⁰ and 0.2⁰ for all Other Angles (When Measuring Relative to the Magnetic Base) Drop Protection: 6.6' (2 m) Ingress Protection: IP54: Water and Dust Resistant Low Battery Alarm: No Batteries: 2 x 1.5 V AAA Included: Digital Angle Gauge; Soft Carrying Case; Instruction Manual; Batteries Overall Length: 1.02'' (2.6 cm) Overall Height: 1.77'' ( 4.5 cm) Overall Width: 2.82'' (7.2 cm) Weight: 3.2 oz (91 g) Document Brochure

Description The Precision Ratchet and Driver System provides a micro-ratchet and magnetic adjustable precision screwdriver to maximize access for various applications. The driver system case compactly houses 60 bits for ideal versatility to best equip you for any job. The case connects to other Klein driver cases, making this the perfect precision pairing with your other driver sets. Benefits Precision Driver Set with 33 precision bits, 16 standard bits, 11 nut drivers, bit adapter, adjustable screwdriver, and micro-ratchet inside our MODbox™ System Case for multi-faceted applications Low-profile micro-ratchet design to provide maximum access and extra torque Magnetic, adjustable 1/4-Inch and 3.5 mm bit holders for standard and precision bits Modular case easily connects to other compatible Klein case sets for convenient organization and on-the-go carry Spin cap offers optimum and precise control Cushion-Grip™ handle for maximum torque and comfort Compact case houses all components and offers a storage area to stow fasteners and other bits along with your tools Technical Information Application: Fasteners Special Features: Ratchet with Forward/Reverse Selector and Tether Point/Hang Hole; Screwdriver Cushion-Grip™ Handle; Adjustable Length Shafts Included: Compact Case, 60 Bits, Cushion-Grip™ Handle and Ratchet Magnetic: Yes Insulated: No Shank Length: 4.45'' (11.3 cm); 3.85'' (9.8 cm) Material: Steel Handle Material: CA/TPE Handle Color: Yellow/Black Handle Length: 4.5'' (11.4 cm) Handle Diameter: 0.75'' (1.9 cm) Color Code: No Overall Length: 8.75'' (22.2 cm) Overall Height: 1.8'' (4.6 cm) Overall Width: 3.7'' (9.4 cm) Number of Pieces: 64 Type: Screwdriver and Ratchet Set Weight: 1.41 lb (0.64 kg) Document Brochure

Description Klein Tools' Magnetic Color-Coded Power Nut Setters are designed with the professional in mind. Each nut setter is made of high-grade impact steel and is color coded for easy identification. The nut setters contain Rare-Earth magnets to securely hold fasteners, and are also extra long for reach into recessed areas. Features 6 hex sizes: 1/4, 5/16, 3/8, 7/16, 1/2, 9/16-Inch Impact rated nut setters for the toughest driving applications Powerful, Rare-Earth magnets to retain fasteners for one-handed driving Color coded hex sizes for easy identification 5-Inch sturdy shaft for extended reach and access Magnet size increases with each hex size to hold screws and nuts more securely Durable finish for corrosion protection Technical Information Application: Fastening; Impact Driving Number of Pieces: 6 Included: 1/4'', 5/16'', 3/8'', 7/16'', 1/2'', 9/16'' Hex sizes Measurement Standard: SAE Drive Size: 1/4'' Drive Type: Hex Special Features: Rare-Earth Magnet, Impact Rated, Color Coded, Extended Length Material: Steel Alloy Insulated: No Shaft Length: 5'' (12.7 cm) Overall Length: 6.3'' (16 cm) Overall Height: 0.8'' (2 cm) Overall Width: 0.8'' (2 cm) Type: Nut Setter Set Weight: 1.57 lb (0.71 kg) UPC: 092644329302 Document Brochure

Description The LUNA 4" fixture, is a 12 watt, recessed light fixture for retrofit, remodel or new construction applications with 360-degree rotation and 30-degree tilt. It is a high-performance, easy to install residential grade downlight solution that offers good light output, energy-efficiency and streamlined design. Suitable for wet locations. Also available in a 4-pack with an OnCloud dimmer for Wi-Fi control through the WiZ app to create scenes, set schedules and connect with smart speakers. Features Durable airtight aluminum body with adjustable regressed gimbal. Includes anodized blue heat sink to provide maximum airflow for the LED light source General application light fixture featuring a 12 watt LED module that maintains uniform intensity producing up to 700 lumens, with a typical CRI of 90 Available in 3000k color temperatures 100%-10% dimming capability. This fixture is compatible with industry standard forward-phase / reverse-phase and TRIAC/ELV dimmers Fixture lens provides 38° beam spread Includes two spring loaded clips to attached to any ceiling material Extruded aluminum hardwire box with 300mA dimmable class II electronic LED driver with 100-135V AC input. Includes an 18" FT6 rated cable with DC 2.1 connector between driver and fixture approved for use in plenums and suspended ceilings Three "quick connect" push-in terminals for fast and easy wiring Operating Temperature from -20°C to 40°C (-4°F to 104°F) Suitable for wet locations Approved for direct contact with insulation Technical Information Application: Ceiling Recess Mount Approved Location: Wet / Insulated Ceilings Beam Angle: 38° CCT: 3000 K to 2000 K Certification: cETLus Class II: Yes Colour: White CRI: 90 Dimming: Yes Dimming Tech: Forward/reverse-phase - TRIAC/ELV Energy Star: Yes Hole Cut: Ø 4¼ " (108mm) Input: 100-135V AC, 60Hz Lumens: Up to 700 Lumens per Watt: Up to 59 Power Factor: 0.9 Projected Life: 70% @ 50,000 hrs Warranty: Lifetime Wattage: 12W Document Brochure Specification Sheet Installation Compatible Dimmers

Description The RA35-12RG is a 12 watt 3.5" round regressed gimbal recessed light fixture for retrofit application. It is a high-performance, easy to install downlight solution that offers good light output, energy-efficiency and streamlined design. Suitable for damp locations. Features Durable airtight aluminum body with adjustable gimbal. Includes anodized blue heat sink to provide maximum airflow for the LED light source. This general application light fixture features a 12 watts LED module that maintains uniform intensity producing up to 680 Lumens; with a typical CRI of 90. On-fixture color selectable switch allows switching between 2700 K, 3000 K, 3500 K, 4000 K and 5000 K color temperatures. 100%-10% dimming capability. This fixture is compatible with industry standard TRIAC/ELV dimmers (See specification sheet for listing of compatible dimmers) The fixture lens provides 38° beam spread. Includes two spring loaded clips to attached to any ceiling material Extruded aluminum hardwire box with 300mA dimmable class II electronic LED driver with 100-135V AC input. Includes an 16" cable from driver to fixture. Three "Quick connect" push-in terminals for fast and easy wiring. Operating temperature range from -20°C to 40°C (-4°F to 104°F) Suitable for wet locations and suitable for insulated ceiling applications. Approved for direct contact with insulation. Airtight Technical Information Application: Ceiling Recess Mount Approved Location: Wet / Insulated Ceilings Beam Angle: 38° CCT (color selectable) 2700 K / 3000 K / 3500 K / 4000 K / 5000 K Certification: cETLus Class II: Yes Color: White CRI: 90+ Dimming: Yes Dimming Tech: Forward/reverse-phase - TRIAC/ELV Energy Star: Yes Hole Cut: Ø 35⁄8" (92mm) Input: 100-135V AC, 60Hz Lumens: Up to 850 Lumens per Watt: Up to 78 Power Factor: >0.90 Projected Life: 70% @ 50,000 hrs Warranty: Lifetime Wattage: 12W Document Brochure Installation instruction Compatible Dimmers Specification Sheet

Description If you are looking to use a convection heater for the first time, then the Apéro is the perfect unit to start with. Simple in both style and in operation, the Apéro is an efficient heater that will warm your room quietly and consistently. Benefit from the built-in digital thermostat that is ultra-precise as well as the option to program the heater to suit your needs. When simplicity and efficiency are what you are looking for, install an Apéro today. Features The X-shaped element design allows for optimum heat transfer to maximize the efficiency of the heater. Durable steel construction with a powder coated finish for a long-lasting product Be in control with a tamperproof, lockable built-in digital thermostat. Equipped with a built-in thermal sensor, located 4 inches from the floor, that detects the coldest air and heats accordingly Technical Information Product Finish: White Wattage: 750/565w Voltage: 240/208V BTU: 2559/1927 Depth: 4in Height: 17.5in Width: 13.39in Remote Control: No Built-in Thermostat: Yes Automatic Shut-Off: Yes Power Source: Electric Warranty: 2-years against all manufacturing defects 5-years on heating elements Document Brochure Installation Manual

Description The RA35-12G is a 12 watt 3.5" round gimbal recessed light fixture for retrofit application. It is a high-performance, easy to install residential grade downlight solution that offers good light output, energy-efficiency and streamlined design. Suitable for damp locations. Features Durable airtight aluminum body with adjustable gimbal. Includes anodized blue heat sink to provide maximum airflow for the LED light source. This general application light fixture features a 12 watts LED module that maintains uniform intensity producing up to 850 Lumens; with a typical CRI of 90. 100%-10% dimming capability. This fixture is compatible with industry standard TRIAC/ELV dimmers (See specification sheet for listing of compatible dimmers) The fixture lens provides 40° beam spread. Includes two spring loaded clips to attached to any ceiling material Extruded aluminum hardwire box with 300mA dimmable class II electronic LED driver with 100-135V AC input. Includes an 16" cable from driver to fixture. Three "Quick connect" push-in terminals for fast and easy wiring. Operating temperature range from -20°C to 40°C (-4°F to 104°F) Suitable for damp locations. Approved for direct contact with insulation. Technical Information Application: Ceiling Recess Mount Approved Location: Wet / Insulated Ceilings Beam Angle: 38° CCT (color selectable): 2700 K / 3000 K / 3500 K / 4000 K / 5000 K Certification: cETLus Class II: Yes Color: White CRI: 90+ Dimming: Yes Dimming Tech: Forward/reverse-phase, TRIAC/ELV Energy Star: Yes Hole Cut: Ø 35⁄8" (92mm) Input: 100-135V AC, 60Hz Lumens: 767 / 789 / 828 / 850 / 796 Lumens per Watt: Up to 78 Power Factor: >0.90 Projected Life: 70% @ 50,000 hrs Warranty: Lifetime Wattage: 12W Document Brochure Specification Sheet Compatible Dimmers Instruction

Description Klein Tools Locknut Wrench Set is designed with an exclusive offset bend, that is perfect for tightening and loosening locknuts in tight spaces. Each set contains the most commonly used conduit sizes, 1/2-Inch, 3/4-Inch and 1-Inch, which are identifiable by color and laser marking. Internal magnets keep the set together in your toolbox. Features Our patent pending locknut wrench design features opposing offset bends for easy access to difficult to reach locknuts Three wrenches included for most commonly used conduit sizes, 1/2-Inch, 3/4-Inch and 1-Inch Two internal magnets on each wrench hold the set together for easy storage The slim alloyed steel design allows for access when space is limited Each wrench is a different color and marked to easily identify size Hooked tip latches on locknut for ultimate turn leverage Steel design is corrosive resistant and durable Technical Information Application: Tighten and Loosen Locknuts Included: (3) Locknut Wrenches, 1/2'', 3/4'' and 1'' Material: Carbon Steel Number of Pieces: 3 Overall Height: 1.78'' (4.5 cm) Overall Length: 6.46'' (16.4 cm) Overall Width: 1.9'' (4.8) Size: 1/2'', 3/4'' and 1'' Special Features: Opposing Offset Bends, Internal Magnets Hold Set Together Type: Locknut Wrench Set Weight: 3.2 oz (91 g) Document Brochure

Description Magnetic hanger for use with Klein Tools' CL120, CL220, CL320, CL390, CL600, CL700, CL800, CL900, ET600, MM325, MM420, MM720, and some older models. The strong magnet attaches securely to metal surfaces. Klein Tools’ Test and Measurement product line was exclusively designed from the ground up by electricians for electricians. Features Durable nylon weave resists wear and tear For use with CL120, CL220, CL320, CL390, CL600, CL700, CL800, CL900, ET600, MM325, MM420, MM720, and some older models Constructed with powerful Rare-Earth magnets Has a secure Velcro® loop & hook Hanger allows the user to safely work hands-free Clips securely into back of rubber boot For use with all Klein Tools Test & Measurement Multimeters and Professional Series Clamps Velcro® is a registered trademark of Velcro Industries B.V Technical Information Application: Electrician's Multimeters and Select Clamps Special Features: Rare-Earth Magnets Material: Nylon For Use With: CL120, CL220, CL320, CL390, CL600, CL700, CL800, CL900, ET600, MM325, MM420, MM720 and some older models Weight: 1.10 oz (31.0 g)

Description Klein Tools’ Tool Vest Combo's front pockets provide quick access to frequently used tools and is a versatile tool carrying system. The 2-Inch web belt can be used for MODBox™ Tool Pouches and slotted or tunnel loop pouches. Customize the fit with the adjustable padded waist and shoulder straps to evenly distribute the weight of tools, parts, and gear for all-day wearing comfort. Features Klein Tools Vest and Pouches allows you to move freely with everything you need to get the job done Front pockets and straps for easy access to frequently used tools, pens, and markers Fully adjustable padded waist and shoulder straps for all-day wearing comfort Breathable mesh padding to keep you cool and wick away moisture Attach any MODbox™, tunnel loop or slotted tool pouches that accommodate a 2-Inch (5.1 cm) belt Can be used with any Klein Tools MODbox™ tool and parts pouches Front and back straps adjust to fit anyone between 5-Foot 3-Inch and 6-Foot 3-Inch (160 to 191 cm) tall Technical Information Type: MODbox™ Tool Vest and Pouch Application: Tool Storage Special Features: Includes Vest, 9-Pocket Tools and Parts Pouch, 18-Pocket Tool Pouch Number of Pockets: 4 Size: One Size Fits Most Belt Width: 2'' (5.1 cm) Overall Length: 20'' (50.8 cm) Overall Height: 28'' (71.1 cm) Overall Width: 4'' (10.2 cm) Material: 1680d material Color: Grey Waist Size: 30'' to 52'' (76.2 to 132.1 cm) Weight: 5.7 lb (2.6 kg) UPC: 092644558290 Document Brochure

Description Klein's ACCU-BEND Magnetic Level helps eliminate dog legs and make conduit bending easier. Powerful Rare-Earth magnets with patented magnet track secure the level to any metal surface. The thumb screw attaches level to conduit to measure angles while bending. Large top-view vial windows are easy to ready from a variety of angles. High-visibility orange makes this level easy to find on the job site. Features Level with patented magnet track prevents powerful Rare-Earth magnets from falling out Thumb screw attaches level to conduit to measure angle while bending Large, easy-to-read high-visibility vials at 4 angles: level, 90, 45, and 30 degrees Large top-view vial windows enable easy readability from multiple angles High-visibility orange professional grade billet aluminum body is easy to see on conduit and at the jobsite V-Groove fits contour of conduit and pipe US Patent 9,964,407 Technical Information Type: ACCU-BEND™ Conduit and Pipe Application: Conduit and Pipe Special Features: Patented Magnet Track Secures the Level to Any Metal Surface Material: Aluminum Accuracy: +/- 0.029° Number of Vials: 4 Type of Vials: 0°, 90°, 45°, 30° Magnet Type: Rare Earth Overall Length: 6.25'' (15.9 cm) Overall Height: 0.75'' (1.9 cm) Overall Width: 1.476'' (3.7 cm) Weight: 5.9 oz (168 g) Document Brochure

Description The 14-in-1 HVAC Adjustable-Length Screwdriver features the most commonly used HVAC driver bits and nut drivers in one tool. Use as a screwdriver or as an impact driver attachment. Flip socket on end of blade has three positions for multiple functions. Great for tight spaces, impact driving and long reach applications. Features Adjustable Screwdriver includes 1/4-Inch and 5/16-Inch nut drivers with 12 driver bits conveniently housed in the handle Adjustable-length blade for use with an impact driver or Klein Tools Cat. No. 32303 or 32907 Multi-function 1/4-Inch socket has both shallow (driver) and deep (bit holder) configurations for added versatility Impact rated blade for use in an impact driver Powerful Rare-Earth magnet securely holds bits and hex head fasteners Includes the most commonly used HVAC bits and nut drivers all in one tool Includes #0, #1, #2 Phillips, 1/8-Inch (3.2 mm), 3/16-Inch (4.8 mm) and 1/4-Inch (6.4 mm) Slotted, #2 Square, T10, T15 , #2 JIS Bit, Schrader Valve Insertion Bit, and Core Removal Bit Cushion-Grip handle for maximum comfort and torque Great for various applications including tight spaces, impact driving and long reach Technical Information Application: Fastening; Impact Driving Special Features: Adjustable Length Screwdriver, Shaft Removes to be Impact Driver Attachment, Flip Socket Nut Driver Sizes: 1/4'', 5/16'' Phillips Bits: #0, #1, #2 Slotted Bits: 1/8'' (3.2 mm), 3/16'' (4.8 mm), 1/4'' (6.4 mm) Square Bits: #2 TORX® Bits: T10, T15 Other Bits: #2 JIS Bit, Schrader Valve Insertion Bit, and Core Removal Bit Magnetic: Yes Bit Retention: Magnetic Shank Length: 1'' to 4'' (2.5 to 10.1 cm) Material: Steel Barrel Insulated: No Handle Type: Cushion-Grip Handle Material: Plastic Handle Color: Black/Yellow Handle Length: 5.13'' (13 cm) Overall Length: 9.73'' (25 cm) Overall Height: 1.42'' (3.6 cm) Overall Width: 1.42'' (3.6 cm) Type: HVAC; Magnetic Weight: 8.8 oz (249 g) Document Brochure

Description Insulated plastic cable staples are used to secure NM, lead wire, and UF cable. These staples don't cut or bruise cable due to smooth and UV resistant plastic saddle. The fasteners are zinc-plated and thus, resist rust and corrosion. Benefits Use to secure NM, lead wire, and UF cable Smooth, UV resistant plastic saddle will not cut or bruise cable Zinc-plated fasteners resist rust & corrosion 1/2” wide size fits 14/2, 12/2, 14/3 and 12/3 cable 3/4” wide size fits 14/3 and 12/3 cable cUL US Listd - CONDUIT AND CABLE HARDWARE 2C86 Technical Information Brand: Ideal Colour: White Material: Plastic saddle, Zinc plated nail

Description Access Faster Charging with Power Delivery! Leviton’s line of Power Delivery (PD) compatible USB chargers are engineered and tested for compatibility with more of the newest devices with built-in PD technology: from phones to tablets, laptops and more! Type-C ports and Power Delivery are featured on the latest devices manufactured by Apple® , Samsung® , Google® , Microsoft® and more, making the technology the new standard. Installation Leviton’s Power Delivery compatible USB In-Wall Chargers can replace a standard receptacle for a convenient upgrade and are compatible with non-PD devices as well as USB Type A devices (adapter required). Features POWERFUL – Charge for minutes, enjoy for hours. The most powerful USB charger on the market with 60W of power on a single port INNOVATIVE – USB Type-C or USB-C provides faster charging and is the new standard port on many phones, tablets and laptops ENHANCED SAFETY – Overcurrent protection helps protect electronic devices from over charging/heating and tamper-resistant outlets prevent unwanted objects from being inserted into the outlets FAST CHARGING – Smart chip ensures each device gets the power level it needs to charge fast and efficiently Technical Information Amperage: 15 A Brand: Decora Color: White Grade: Residential/Commercial Specification Grade Grounding: Grounding NEMA: 5-15R Strap Material: Steel Tamper Resistant: Yes Termination: Wire Leads Type: 60W Type C/C with PD Duplex Receptacle Voltage: 125 VAC Wallplate: Included Warranty: 2-Year Limited Wire: 3 Flammability: Rated V-0 per UL 94 Operating Temperature: -10°C to 40°C Environmental Specifications Body Material: Thermoplastic Face Material: Thermoplastic Notes: w/ Wallplate Operating Temperature: -10°C to 40°C Yoke: Zinc-Plated Steel Torque Range: 14 – 18 in.-lbs Type: 60W Type C/C with PD Duplex Receptacle FCC Part 15: Class B Listed: cCSAis NOM: 057 UL 1310: Yes UL 498: Yes Warranty: 2-Year Limited Document USB Product Brochure

Description The 20-in-1 Impact Driver Set provides the essential screwdriving and nut driving tools all housed within one tool. The versatility provided allows for convenient swapping between the common nut driving sizes and quickly attaches to an impact driver or our 1/4-Inch quick-connect handles. Every component is impact-rated, making it an essential tool for the toughest driving applications. Features 13 screwdriver bits, 6 nut setter sizes and a 1/4-Inch bit-holder all in one compact tool Impact-rated sockets and screwdriver bits for the toughest driving applications Store screwdriver bits within the handle and flip sockets on the shaft for convenient carry Patented bit holding design allows the 1/4-Inch socket size to drive hex fasteners and hold screwdriver bits Bit tips include #0, #1, #2, #3 Phillips, 1/4, 3/16-Inch Slotted, #1, #2 Square, T10, T15, T20, T25 TORX®, #2 Combo and 1/4, 5/16, 3/8, 7/16, 1/2 and 9/16-Inch nut drivers Powerful Rare-Earth magnet to retain bits and hex bolts within sockets TORX® is a registered trademark of Acument Intellectual Properties, LLC Technical Information Application: Fastening; Impact Driving Special Features: Multi-Bit Nut Driver and Screwdriver; Screwdriver Bits Stored in Handle; Impact Rated; Flip Socket; Rare-Earth Magnet Nut Driver Sizes: 1/4'', 5/16'', 11/32'', 3/8'', 7/16'', 1/2'' Phillips Bits: #0, #1, #2, #3 Slotted Bits: 3/16'' (4.8 mm), 1/4'' (6.4 mm) Square Bits: #1, #2 Combo Bits: #2 TORX® Bits: T10, T15, T20, T25 Bit Retention: Magnetic Material: Steel Alloy Insulated: No Handle Type: Cushion Grip Handle Material: Plastic Handle Color: Yellow/Black Handle Length: 5.13'' (13.0 cm) Overall Length: 10.45'' (26.5 cm) Overall Height: 1.4'' (3.6 cm) Overall Width: 1.4'' (3.6 cm) Number of Pieces: 18 Type: Color Coded Weight: 10.56 oz (299 g) UPC: 092644328947 Document Brochure

Description The Klein Tools P100 Half-Mask respirator offers protection without compromising comfort and wearability. When paired with the replaceable P100 filters, this respirator is approved in accordance with NIOSH to provide protection against all particulate aerosols including solid and liquid particules such as dust, fumes, and oil mist. The lightweight and compact profile minimizes interference with safety glasses for maximum visibility on the jobsite. Designed with a simple, push-in fit check mechanism for quick and easy face seal validation. In addition, to a built-in sample port for non-destructive face fit testing. Replaceable P100 filters are low-profile and easy to change as needed. Features NIOSH P100 rated respirator with replaceable filters offer protection from dust, metal fumes, and oil mist Lightweight and compact design minimizes interference with safety eyewear for maximum visibility Designed with a simple push-in fit check mechanism for quick and easy face seal validation Downward-facing exhalation valve to prevent fogging of glasses Built-in sample port for non-destructive face fit testing Easy-to-adjust strap mechanism Replaceable P100 filters ( Cat. No. 60554, sold separately) Technical Information Type: P100 Half-Mask Respirator Application: P100 Particulate Filter Effective Against all Particulate Aerosols Special Features: Low-Profile Design, Push-in Fit Check Mechanism, Built in Sample Port Disposable/Reusable: Reusable Material: TPE (Thermo Plastic Elastomer) Size: Medium/Large Overall Length: 5.17'' (13.1 cm) Overall Height: 3.57'' (9.1 cm) Overall Width: 5.81'' (14.8 cm) Standard: NIOSH (TC-84A-9447) Included: (1) Respirator; (2) Replaceable Filters Weight: 0.4 oz (183 g) Document Brochure Instruction Replacement filter instruction

Description Klein Tools Sweatband replacement works with Klein's Cap Style or Full Brim Hard Hats. Attaches with four hooks in the suspension system and secures with hook and loop material extended from the band. Replaceable and machine washable, this durable, padded material offers sweat-wicking and odor control properties. Sold in 3-pack. Features Hard hat sweatband is built with durable padded materials; enhances long-term comfort by reducing pressure on the head Sweat-wicking and odor control properties to improve cooling and maintain freshness longer Extended coverage: wicks away sweat from forehead and the side of your head Replaceable and machine washable to stay fresh and reuse multiple times Easily attaches to Klein hard hats suspension system with hook and loop attachment Fits both full brim and cap style hard hats Available in 3-pack replacement Technical Information Type: Sweatband Application: Sweat Absorption from Front and Side of Head Special Features: Padded, Sweat Wicking, and Odor Resistant Overall Length: 15.8'' (40.1 cm) Overall Height: 0.3'' (0.8 cm) Overall Width: 4'' (10.1 cm) Material: Polyester Weight: 0.4 oz (12 g) Package Quantity: 3 Document Brochure Instruction

Description The Leviton Thermal Magnetic breakers are best used for traditional applications where temperatures do not fluctuate far from the reference ambient temperatures for circuit breakers, 25°C to 40°C (77°F to 104°F).The face of each breaker is marked with a ‘T’ indicating Thermal. ****For security reasons, we cannot accept returns on circuit breakers. Benefits Simple: Features an all plug-on design - no wiring to the circuit breaker Intuitive: Color indicators in the handle to easily see operational status at-a-glance Approachable: Contemporary aesthetic and rocker style handle are more user friendly Technical Information Dimensions: 3.9" H x 2.0" W x 3.1" D Smart: No Warranty: 10-Year Limited Weight: 0.85 lbs. Wiring: All Plug-on Amperage: 30 A Breaker Technology: Thermal Magnetic Pole: 2 Short Circuit Current Rating: 10 KA Type: Standard Voltage: 120/240 VAC Standards & Certifications CSA-C22.2 No. 5-02: Yes EMC Compatibility: Yes FCC: Yes RoHS: Yes UL 489: Yes

Description The LEDbar is an integrated linear light bar, that is available in various lengths, with a color selectable switch on the fixture. With dependable features that include a durable extruded aluminum frame, you can be confident in product longevity. Suitable for dry locations, this product is an optimal choice for kitchen spaces amongst other similar applications. The built-in, non-flicker, electronic LED driver provides dimming capability with Triac, ELV and incandescent dimmers. The ability to hardwire this fixture is accompanied by the capability to link up to 10 fixtures with an added no shadow linking connector to maximize light output. With a built in on/off switch, a choice of 6 lengths, LEDBAR gives you the perfect combination of design and functionality. ****POWER CORD NEED TO BE ORDER SEPARATELY. SEE ALFT6000-WH-3 HERE Features Durable extruded aluminum frame with frosted smooth lens. Suitable for dry location applications only. Can be use in closets. On-body On/Off switch is provided for individual control (Except 9" models) 5-Position 2700-5000K CCT select switch. Fixture is provided with built-in silent non-flicker electronic LED driver, 120V, 50/60HZ Fixture is 100-10% dimmable with industry standard TRIAC/ELV and incandescent dimmers Powered by LED integrated strip that maintains uniform intensity with 70% lumens at 60,000 hours with a rated life of 36,000 hours average life; at 90 CRI The fixture lens provides for 125° beam spread Complete with a joiner, these no shadow linking fixtures can be linked up to 2500 mA / 300 W. Hardware provided for mounting fixture to standard horizontal surfaces or vertical wall surface Operating temperature from -18°C to 40°C (0°F to 104°F) Technical Information Length: 22-5/8 in (574mm) Approved Location: Dry Beam Angle: 125° CCT Switch: 2700 K / 3000 K / 3500 K / 4000 K / 5000 K Certification: cULus Connection Type: 3-Wire CRI: 90+ Dimming: Yes Dimming Technology: TRIAC / ELV Lumens: Up to 802 Max. Operating Temp: 40°C Min. Start Temp: -18°C Lumen Maintenance: 70% @ 60,000 hrs Power Factor: >0.95 Rated Life: 36,000 hrs THD: <15 Voltage: 120V Warranty: 3 Years Wattage: 9 watt Document Specification Sheet Installation Manual

Description The Arlington Recessed TV Box allows your LCD and a flat-screen TV to be placed flush against the wall without the appearance of wires and cables. The B613GC is a non-metallic TV Box for power and low voltage devices, it can be used with new and existing construction. This recessed TV box is great for phone, cable, speaker, and surround sound installations. Benefits The box is recessed so plugs don't extend past the wall Textured, paintable trim plate, covers edges of cut out drywall Positioning tabs for 1/2" wall thickness assure accurate placement of box on stud Great for phone, cable, satellite TV, speaker, and surround sound installations Horizontal or vertical mounting Low voltage separator provided for built-in 2-gang device box so power and low voltage can be combined cUL listed B613GC includes a recessed TV Box with trim plate, low voltage separator, NM cable connector, and installation screws Technical Information Model#: TVB613GC Height: 7.000" Width: 17.000" Colour: White Material: Plastic Documents Specification Shee t TVB613 Line Drawing

Description The Klein Tools Belt Pouch Clip is for use with all MODbox™ tool and part pouches and fits belts up to 2.5-Inch wide. The Tool Belt Pouch Clip allows for multiple belt set-ups and so pouches can be easily exchanged between tool belts or removed for storage. Features MODBox™ Tool Belt Pouch Clips fits any 2.5-Inch belt For use with all MODbox™ pouches Includes 3 clips per pack 30-Degree clip design allows for pouch to move with you to keep contents upright Locking mechanism secures clip to belt MODbox™ pouches sold separately Note: Tools sold separately Technical Information Type: MODbox™ Accessory Application: Tool Carrying Special Features: Connects to all MODbox™ Tool and Part Pouches Overall Length: 2.6'' (6.6 cm) Overall Height: 3.45'' (8.8 cm) Overall Width: 1.25'' (3.2 cm) Material: Plastic For Use With: MODbox™ Tool and Part Pouches Weight: 2.32 oz (66 g) Document Brochure

Description The Klein Tools #2 Philips Screwdriver, f eatures a cushion grip handle for greater torque and comfort. Its precision-machined tip provides an accurate fit and a more consistent geometric symmetry than conventional Phillips-tip screwdrivers. Easily identify your screwdriver tip and type with Tip-Ident; colour coded engravings on the bottom of the driver. Benefits Precision-machined tip provides accurate fit and torque without slippage Tip-Ident allows the user to quickly and easily identify the driver tip and type Cushion grip handle allows for greater torque and comfort Tip is precision-machined to provide a more consistent geometric symmetry than conventional Phillips-tip screwdrivers Chrome-plated shaft - heat-treated for corrosion resistance Internal flanges inside provide twist-resistant blade anchor Meets ASME & ANSI specifications Technical Information Brand: Klein Tools Tip Type: Phillips Tip Size: #2 Shank Type: Round Overall Length 8-5/16'' (21 cm) Shank Length 4'' (10.2 cm) Magnetic: No Insulated: No Documents Klein Screwdriver Brochure

Description Leviton offers a variety of keyless lampholders for your everyday use. This keyless lampholder is resilient and long lasting, made out of aluminum. Perfect for closets, basements, a crawl space or utility room. Technical Information 660W, 600V Keyless One-piece

Description Klein Tools' Folding Utility Knife with Blade Storage is crafted with precision from aluminum to stand out as the ultimate all-around knife in your bag. Its folding design ensures compact storage and effortless portability, while the intuitive side button release guarantees quick deployment. The blade locks in position at 135-Degree and 180-Degree positions for effortless cutting for every task. It is also equipped with a fold out blade storage compartment that comes pre-loaded with five extra blades. Features Folding Utility Knife With Blade Storage blade locks open at 135-Degree or 180-Degree angles for versatile cutting options Fold out blade holder stores and comes with five extra blades Intuitive side-button release for quick and easy opening Slot on top back of handle easily cuts straps when knife is closed Effortlessly fits into tool pouches and pockets, enhanced by a pocket-friendly belt clip Designed for ergonomic and comfortable use during tasks Features a practical tether hole at the back of the handle Technical Information Type: Knife Application: Utility Knife Special Features: Side Release Button Blade Length: 1'' (2.5 cm) Overall Length: 6.9'' (17.5 cm) Overall Height: 1.3'' (3.3 cm) Overall Width: 1.1'' (2.8 cm) Material: Aluminum Length Closed: 4.5'' (11.4 cm) Blade Type: Utility Blade Blade Material: Steel Number of Blades: 6 Closure Type: Fold Out Handle Color: Orange Handle Material: Aluminum Weight: 4.6 oz (130 g)

Description Leviton New Design Range Receptacle, Flush Mount, Single, 3-Pole, 4 Wire with Grounding Industrial Spec Grade. Benefits Flush Mount Single, 3-Pole 4 Wire with Grounding Industrial Spec Grade NEW Feature: 1-Piece Nylon Construction with integral 5.50"X 5.43" Mounting Plate. "Available in Canada Only" Technical Information Color: White NEMA: 14-50R Height 5.5 In. Width 5.5 In. Depth 1.57 In. Weight 0.4 Lbs Ampage: 50 A Max. Voltage: 125/250 Volt CSA: Certified CU/AL: Rated RoHS: Compliant

Description The Klein Tools P100 Half-Mask respirator offers protection without compromising comfort and wearability. When paired with the replaceable P100 filters, this respirator is approved in accordance with NIOSH to provide protection against all particulate aerosols including solid and liquid particules such as dust, fumes, and oil mist. The lightweight and compact profile minimizes interference with safety glasses for maximum visibility on the jobsite. Designed with a simple, push-in fit check mechanism for quick and easy face seal validation. In addition, there is a built-in sample port for non-destructive face fit testing. Replaceable P100 filters are low-profile and easy to change as needed. Features Replaceable filters for Klein Tools NIOSH P100 Half Mask Respirators (Cat. Nos. 60552, 60553) Assist with protection from dust, metal fumes, and oil mist Easily replaceable and disposable to ensure ongoing protection Suitable for use in various industrial environments including jobsites and construction sites Replacement P100 filters sold in a 2-Pack, with 1-Pair in each pack Filters are low-profile and provide unobstructed field of vision Approved to NIOSH Standard (TC-84A-9447) when paired with Klein Tools P100 Half Mask Respirator (Cat. Nos. 60552, 60553) Technical Information Type: P100 Half-Mask Filter Application: P100 Particulate Filter Effective Against All Particulate Aerosols Special Features: Low Profile P100 Filters Color Code: Purple For Use With: Cat. Nos. 60552, 60553 Overall Length: 2.35'' (6 cm) Overall Height: 0.45'' (1.1 cm) Overall Width: 2.81'' (7.1 cm) Material: Filtering Media/Nylon Standard: NIOSH (TC-84A-9447) Weight: 0.3 oz (8.6 g) Document Brochure Instruction Replacement filter instruction