Chargeurs et blocs d'alimentation

Description Le bloc d'alimentation M18™ CARRY-ON™ 3600 W/1800 W de Milwaukee offre une puissance de 15 A extrêmement polyvalente pour les chantiers, en toute simplicité. Ce bloc d'alimentation délivre 3600 watts au démarrage et 1800 watts en fonctionnement grâce à un onduleur sinusoïdal pur, avec une puissance continue plus longue. Il permet d'alimenter des outils professionnels exigeants, tels que des scies circulaires sur table, des compresseurs à crêpes ou même des fileteuses. Alimentez tous vos outils, des outils 15 A aux appareils électroniques sensibles, grâce à la technologie de démarrage instantané et à une puissance plus continue. En combinant n'importe quelle batterie M18™, vous pouvez alimenter n'importe quel produit 15 A et minimiser les tracas liés à l'alimentation électrique sur chantier. Ce bloc d'alimentation sans fil, silencieux, compact et sans émissions, peut fonctionner en intérieur et sous terre, y compris dans les espaces confinés, sur les nacelles élévatrices et les chariots utilitaires. Léger et compact, le bloc d'alimentation CARRY-ON™ permet d'avoir l'électricité à portée de main, sans avoir recours à des alternatives au gaz ni à des rallonges. Le M18 CARRY-ON™ de Milwaukee ne peut fonctionner qu'avec quatre batteries. Les utilisateurs peuvent charger les batteries M18™ simultanément à un courant standard de 3 A lorsque le produit n'est pas en mode décharge. Protégez les batteries contre le vol grâce aux compartiments verrouillables avec un cadenas (non fourni). Rechargez vos appareils électroniques sensibles plus rapidement grâce aux ports USB-C PD et USB-A. L'alimentation temporaire est compatible avec la bandoulière (vendue séparément), réduisant ainsi la fatigue lors du transport sur et hors chantier. ***PILES NON INCLUSES*** Caractéristiques Alimentation 15 A la plus polyvalente. Moins de tracas. 3 600 watts de démarrage/1 800 watts de fonctionnement Compatible avec toutes les batteries M18™ (NON INCLUSES) L'onduleur à onde sinusoïdale pure protège les appareils électroniques sensibles Chargeur M18™ simultané standard 3 A intégré Compatible avec la bandoulière 49-16-2845 (vendue séparément) Garantie de 3 ans Informations techniques Type de chargeur : Chargeur standard Système de batterie : M18 Tension : 120 Alimentation : Oui Longueur : 15,05 po Poids : 28,0 lb Hauteur : 13,75 po Largeur : 12,25 po Document Manuel d'instructions

Description Klein Tools' Portable Power Station has been designed with the job site in mind. The 505Wh lithium-ion battery provides power to devices and small rechargeable tools to keep the job running. Its environmentally friendly, Pure Sine-Wave power is a better alternative to loud, exhaust-emitting gas generators. Features Portable Power Station delivers 500W of Pure Sine-Wave AC power (up to 1000W surge) Lightweight design and collapsible handle maximize portability Built-in Lithium-ion battery pack allows for safe, indoor use Charge and power up to 7 devices simultaneously: two 120V outlets, four USB ports (60W USB-C PD, USB-C and 2 x USB-A) and a 12V car port Digital LCD Screen displays real time performance metrics including time until empty Harness the sun's energy with Klein Tools' Solar Panel (Cat. No. 29250) to charge the portable power station Pass through charging to simultaneously charge KTB500 and power devices 505Wh capacity can power a 50W, 5,000 lumen work light for a full 8 hour shift Compact size for convenient storage in job box or vehicle to power devices anywhere Internal cooling fan keeps the appropriate operating temperature range Technical Information Capacity: 505Wh 120V Power (Continuous/Surge): 500W / 1000W Number of Outputs: 7 120V Outlets: 2 (Pure-Sine Wave) USB-A Ports: 2 USB-C Ports: 1 USB-C Ports (60W): 1 12V Output Port: 1 Input Port: 8mm Round Port Recharge Time: 7 hr Pass-Through Charging: Yes Solar Compatible: Yes (8mm Port) MPPT Built-In: No Maximum Solar Input: 105W (8mm Port) Type: Power Station Application: Provide Portable AC and DC Power Special Features: Lightweight and Compact Design, Rotating Carry Handle, Pass-Through Charging, Multi-Metric LCD Display Battery Type: Lithium-Ion Operating Temperature: 14° to 104°F (-10° to 40°C) Battery Life: 500 Cycles to 80% Capacity (Depending Upon Use and Care) Included: AC Wall Charger, 12V Auto to 8mm Barrel Adapter Overall Length: 11.8'' (29.9 cm) Overall Height: 7.3'' (18.5 cm) Overall Width: 7.5'' (19.1 cm) Material: Plastic (PC/ABS) Standard: FCC, BC, NRCAN Weight: 13.9 lb (6.3 kg) Document Brochure Instruction

Description Distribute power and lighting to the jobsite from a central location with the Klein Tools PowerHub (Cat. No. 29610). The space saving, vertical design keeps electrical plugs off the ground by stacking six covered, surge protected 120V outlets. The built-in GFCI removes the need for additional GFCI adapters. Brighten up dimly lit areas with the adjustable, 5,000 lumen LED work light. Easily carry to any location by grabbing the rugged, exoskeleton handles that are conveniently located on the top and sides of the PowerHub. Features 6 surge protected, overcurrent protected, and covered 120V outlets help keep devices powered and electronics protected Integral GFCI helps comply with OSHA 1926.404(b)(1) when properly connected and tested Elevated 5,000 lumen LED work light rotates from -15 to 75-Degree to illuminate workspaces Two USB-A ports and two USB-C ports keep your phones, tablets and electronics charged up and ready to go Vertical design saves space on the jobsite and keeps plugs and charging electronics off the ground Rugged exoskeleton keeps the PowerHub protected and integrates convenient handholds for carrying Integrated power cord wrap holds up to 50 feet of 12 AWG cord for easy storage and transport with the PowerHub; power cord not included Support arms keep cell phones and other small electronics off the ground while charging Firm, sturdy base keeps the PowerHub in place and prevents it from being tipped over Technical information Type: Power Supply Application: Power and Illumination for Job Sites Special Features: GFCI Built-In, Surge Protected, 5000 Lumen Work Light, 4 USB Ports, Electronic Support Arms, Exoskeleton Color: Orange/Black Plug Configuration: NEMA 5-15P Receptacle Configuration: 6 x NEMA 5-15R Plug Style: Recessed Number of Outlets: 6 USB Charging Port: 2x USB-A Ports and 2x USB-C Ports Amperage: 15 A Voltage: 125 V Wattage: 1875 W Number of Conductors: 3 Rating: 1875W Indoor/Outdoor: Dry Location Use Only Temperature Range: Operating Temperature: 14° to 122°F (-10° to 50°C); Storage Temperature: -4° to 158°F (-20° to 70° C) Power Indicator: Yes Surge Protector: 2160 Joules Circuit Breaker: Yes Material: Various Standard: CONFORMS TO UL STD; 1363,1449, 153; CERTIFIED TO CSA STD; C22.2#308:2018; C22.2#269.3:2017; C22.2#250.4:2020 Overall Length: 14'' (35.6 cm) Overall Height: 25'' (63.5 cm) Overall Width: 14'' (35.6 cm) Weight: 16.2 lb (7.4 kg) Document Brochure Instruction

Description Klein’s 60W Foldable Solar Panel harnesses the sun’s power to keep the job running. A quick and easy way to charge your power banks, power stations, and portable batteries with the built-in extended length Anderson Powerpole® / DC cables. Or simply recharge your USB devices with the integrated USB port. This portable and versatile panel can be chained with a second panel to collect even more power from the sun, then simply fold and store away. Features 60-watt foldable solar panel capable of charging power banks, portable batteries and other devices using USB, Anderson Powerpole® (APP®), or 8mm DC connectors Capability to chain an additional panel (up to 120W) to collect more solar power and increase charge times Kickstands angle the panel to help maximize the surface exposed to the sun and LED lights indicate your level of solar power input Two monocrystalline panels fold, creating a protective, compact case for easy storage and versatility Integrated USB-A port for direct charging of USB devices A long reaching 16.4-Foot (5 m) APP® cable, the APP® to 8mm DC Connector, and the APP® chaining cable all conveniently store in the integrated power pocket Carry easily with the reinforced handle or convenient shoulder strap Eyelets on the panel and kickstands allow you to easily mount or stake the panel Technical Information Application: Solar Panel, Charges Power Banks, Portable Batteries, Personal Electronics Special Features: Adjustable Shoulder Strap, Reinforced Handle, Kickstands, Solar Power Indicator Lights, Chain 2 Solar Panels (up to 120 W) Wattage: 60 watts Output Port: APP®: 18V/3.34A, USB-A: 5V/3.0A Input Port: APP® Input, USB-A Port Cable Size: 16 AWG Weight: 5.7 lb (2.6 kg) Overall Length: 20.5'' (52.1 cm) Overall Height: 36.5'' (92.7 cm) Overall Width: 2'' (5.1 cm) Amperage: 3.34A Maximum Voltage: 18V Maximum Type: Monocrystalline Operating Temperature: 14° to 122°F (-10° to 50°C) Number of Panels: 2 Material: Monocrystalline Silicon Standard: RoHS, CE, EMC, REACH Included: Solar Panel, Powerpole to 8mm DC Adapter, APP Output Cable and USB-A Output Port Document Brochure Instruction