Description Les câbles chauffants autorégulants préassemblés nVent Raychem FrostGuard sont conçus pour la protection contre le gel des canalisations et le dégivrage des toitures et gouttières. Disponibles en 120 V, en différentes longueurs et avec un cordon d'alimentation de 1,8 m. Avantages Conception simple : version 120 V en longueurs de 6, 12, 18, 24, 36, 50, 75 et 100 pieds, chacune avec un cordon d'alimentation de 6 pieds et une fiche à 3 broches, mise à la terre et éclairée pour indiquer que le système est allumé. Facile à installer : pré-assemblé avec une fiche et un fil froid pour éviter le besoin de raccordement par un électricien Efficace sur le plan énergétique et sûr : câble autorégulant, aucune surchauffe possible même en cas de chevauchement ou de faible espacement Fiable pendant une longue durée de vie : garantie produit de 2 ans disponible, sans entretien. Informations techniques Marque : NVent RAYCHEM Longueur : 50 pieds Technologie des câbles chauffants : autorégulants Tension nominale : 120 V Couleur : Noir Type de chemin de terre : tresse Température minimale d'installation : -15 °C Largeur nominale : 11,4 mm Hauteur nominale : 6,1 mm Température maximale d'exposition continue, sous tension : 65 °C Longueur du câble froid : 1,83 m Documents Manuel d'installation Fiche de données
Description Les câbles chauffants autorégulants préassemblés nVent Raychem FrostGuard sont conçus pour la protection contre le gel des canalisations et le dégivrage des toitures et gouttières. Disponibles en 120 V, en différentes longueurs et avec un cordon d'alimentation de 1,8 m. Avantages Conception simple : version 120 V en longueurs de 6, 12, 18, 24, 36, 50, 75 et 100 pieds, chacune avec un cordon d'alimentation de 6 pieds et une fiche à 3 broches, mise à la terre et éclairée pour indiquer que le système est allumé. Facile à installer : pré-assemblé avec une fiche et un fil froid pour éviter le besoin de raccordement par un électricien Efficace sur le plan énergétique et sûr : câble autorégulant, aucune surchauffe possible même en cas de chevauchement ou de faible espacement Fiable pendant une longue durée de vie : garantie produit de 2 ans disponible, sans entretien. Informations techniques Marque : NVent RAYCHEM Longueur : 24 pieds Technologie des câbles chauffants : autorégulants Tension nominale : 120 V Couleur : Noir Type de chemin de terre : tresse Température minimale d'installation : -15 °C Largeur nominale : 11,4 mm Hauteur nominale : 6,1 mm Température maximale d'exposition continue, sous tension : 65 °C Longueur du câble froid : 1,83 m Documents Manuel d'installation Fiche de données
Description Les câbles chauffants autorégulants préassemblés nVent Raychem FrostGuard sont conçus pour la protection contre le gel des canalisations et le dégivrage des toitures et gouttières. Disponibles en 120 V, en différentes longueurs et avec un cordon d'alimentation de 1,8 m. Avantages Conception simple : version 120 V en longueurs de 6, 12, 18, 24, 36, 50, 75 et 100 pieds, chacune avec un cordon d'alimentation de 6 pieds et une fiche à 3 broches, mise à la terre et éclairée pour indiquer que le système est allumé. Facile à installer : pré-assemblé avec une fiche et un fil froid pour éviter le besoin de raccordement par un électricien Efficace sur le plan énergétique et sûr : câble autorégulant, aucune surchauffe possible même en cas de chevauchement ou de faible espacement Fiable pendant une longue durée de vie : garantie produit de 2 ans disponible, sans entretien. Informations techniques Marque : NVent RAYCHEM Longueur : 18 pieds Technologie des câbles chauffants : autorégulants Tension nominale : 120 V Couleur : Noir Type de chemin de terre : tresse Température minimale d'installation : -15 °C Largeur nominale : 11,4 mm Hauteur nominale : 6,1 mm Température maximale d'exposition continue, sous tension : 65 °C Longueur du câble froid : 1,83 m Documents Manuel d'installation Fiche de données
Description Les câbles chauffants autorégulants préassemblés nVent Raychem FrostGuard sont conçus pour la protection contre le gel des canalisations et le dégivrage des toitures et gouttières. Disponibles en 120 V, en différentes longueurs et avec un cordon d'alimentation de 1,8 m. Avantages Conception simple : version 120 V en longueurs de 6, 12, 18, 24, 36, 50, 75 et 100 pieds, chacune avec un cordon d'alimentation de 6 pieds et une fiche à 3 broches, mise à la terre et éclairée pour indiquer que le système est allumé. Facile à installer : pré-assemblé avec une fiche et un fil froid pour éviter le besoin de raccordement par un électricien Efficace sur le plan énergétique et sûr : câble autorégulant, aucune surchauffe possible même en cas de chevauchement ou de faible espacement Fiable pendant une longue durée de vie : garantie produit de 2 ans disponible, sans entretien. Informations techniques Marque : NVent RAYCHEM Longueur : 36 pieds Technologie des câbles chauffants : autorégulants Tension nominale : 120 V Couleur : Noir Type de chemin de terre : tresse Température minimale d'installation : -15 °C Largeur nominale : 11,4 mm Hauteur nominale : 6,1 mm Température maximale d'exposition continue, sous tension : 65 °C Longueur du câble froid : 1,83 m Documents Manuel d'installation Fiche de données
Description Les câbles chauffants autorégulants préassemblés nVent Raychem FrostGuard sont conçus pour la protection contre le gel des canalisations et le dégivrage des toitures et gouttières. Disponibles en 120 V, en différentes longueurs et avec un cordon d'alimentation de 1,8 m. Avantages Conception simple : version 120 V en longueurs de 6, 12, 18, 24, 36, 50, 75 et 100 pieds, chacune avec un cordon d'alimentation de 6 pieds et une fiche à 3 broches, mise à la terre et éclairée pour indiquer que le système est allumé. Facile à installer : pré-assemblé avec une fiche et un fil froid pour éviter le besoin de raccordement par un électricien Efficace sur le plan énergétique et sûr : câble autorégulant, aucune surchauffe possible même en cas de chevauchement ou de faible espacement Fiable pendant une longue durée de vie : garantie produit de 2 ans disponible, sans entretien. Informations techniques Marque : NVent RAYCHEM Longueur : 100 pieds Technologie des câbles chauffants : autorégulants Tension nominale : 120 V Couleur : Noir Type de chemin de terre : tresse Température minimale d'installation : -15 °C Largeur nominale : 11,4 mm Hauteur nominale : 6,1 mm Température maximale d'exposition continue, sous tension : 65 °C Longueur du câble froid : 1,83 m Documents Manuel d'installation Fiche de données
Description Les câbles chauffants autorégulants préassemblés nVent Raychem FrostGuard sont conçus pour la protection contre le gel des canalisations et le dégivrage des toitures et gouttières. Disponibles en 120 V, en différentes longueurs et avec un cordon d'alimentation de 1,8 m. Avantages Conception simple : version 120 V en longueurs de 6, 12, 18, 24, 36, 50, 75 et 100 pieds, chacune avec un cordon d'alimentation de 6 pieds et une fiche à 3 broches, mise à la terre et éclairée pour indiquer que le système est allumé. Facile à installer : pré-assemblé avec une fiche et un fil froid pour éviter le besoin de raccordement par un électricien Efficace sur le plan énergétique et sûr : câble autorégulant, aucune surchauffe possible même en cas de chevauchement ou de faible espacement Fiable pendant une longue durée de vie : garantie produit de 2 ans disponible, sans entretien. Informations techniques Marque : NVent RAYCHEM Longueur : 6 pieds Technologie des câbles chauffants : autorégulants Tension nominale : 120 V Couleur : Noir Type de chemin de terre : tresse Température minimale d'installation : -15 °C Largeur nominale : 11,4 mm Hauteur nominale : 6,1 mm Température maximale d'exposition continue, sous tension : 65 °C Longueur du câble froid : 1,83 m Documents Manuel d'installation Fiche de données
Description Les câbles chauffants autorégulants préassemblés nVent Raychem FrostGuard sont conçus pour la protection contre le gel des canalisations et le dégivrage des toitures et gouttières. Disponibles en 120 V, en différentes longueurs et avec un cordon d'alimentation de 1,8 m. Avantages Conception simple : version 120 V en longueurs de 6, 12, 18, 24, 36, 50, 75 et 100 pieds, chacune avec un cordon d'alimentation de 6 pieds et une fiche à 3 broches, mise à la terre et éclairée pour indiquer que le système est allumé. Facile à installer : pré-assemblé avec une fiche et un fil froid pour éviter le besoin de raccordement par un électricien Efficace sur le plan énergétique et sûr : câble autorégulant, aucune surchauffe possible même en cas de chevauchement ou de faible espacement Fiable pendant une longue durée de vie : garantie produit de 2 ans disponible, sans entretien. Informations techniques Marque : NVent RAYCHEM Longueur : 75 pieds Technologie des câbles chauffants : autorégulants Tension nominale : 120 V Couleur : Noir Type de chemin de terre : tresse Température minimale d'installation : -15 °C Largeur nominale : 11,4 mm Hauteur nominale : 6,1 mm Température maximale d'exposition continue, sous tension : 65 °C Longueur du câble froid : 1,83 m Documents Manuel d'installation Fiche de données
Description Les câbles chauffants autorégulants préassemblés nVent Raychem FrostGuard sont conçus pour la protection contre le gel des canalisations et le dégivrage des toitures et gouttières. Disponibles en 120 V, en différentes longueurs et avec un cordon d'alimentation de 1,8 m. Avantages Conception simple : version 120 V en longueurs de 6, 12, 18, 24, 36, 50, 75 et 100 pieds, chacune avec un cordon d'alimentation de 6 pieds et une fiche à 3 broches, mise à la terre et éclairée pour indiquer que le système est allumé. Facile à installer : pré-assemblé avec une fiche et un fil froid pour éviter le besoin de raccordement par un électricien Efficace sur le plan énergétique et sûr : câble autorégulant, aucune surchauffe possible même en cas de chevauchement ou de faible espacement Fiable pendant une longue durée de vie : garantie produit de 2 ans disponible, sans entretien. Informations techniques Marque : NVent RAYCHEM Longueur : 12 pieds Technologie des câbles chauffants : autorégulants Tension nominale : 120 V Couleur : Noir Type de chemin de terre : tresse Température minimale d'installation : -15 °C Largeur nominale : 11,4 mm Hauteur nominale : 6,1 mm Température maximale d'exposition continue, sous tension : 65 °C Longueur du câble froid : 1,83 m Documents Manuel d'installation Fiche de données
Description Le kit de support de suspension nVent RAYCHEM WinterGard H915 offre une protection mécanique et un soulagement de la tension pour les câbles chauffants WinterGard Wet lorsqu'ils pénètrent dans les descentes pluviales et sur des bords tranchants. Avantages Kit de support de suspension pour câbles chauffants WinterGard Wet Protection mécanique et décharge de traction pour câbles WinterGard Wet pour descentes pluviales et bords tranchants Homologué UL et CSA Informations techniques Marque : nVent Raychem Matériau : Aluminium Hauteur : 298,5 mm Largeur : 25,4 mm Profondeur : 1,5 mm Documents Fiche technique Instructions d'installation
Description Les kits de supports de fixation de toit nVent RAYCHEM WinterGard H913 et H914 sont utilisés pour fixer les câbles chauffants WinterGard Wet aux toits et aux gouttières. Les clips peuvent être fixés mécaniquement (vis ou clous) sur les toits en bardeaux de bois ou à l'aide d'adhésif sur les toitures métalliques, en ardoise ou composites. Les kits H913 et H914 sont homologués pour une utilisation avec les systèmes de câbles chauffants WinterGard Wet homologués UL et certifiés CSA, ainsi qu'avec les câbles chauffants pré-connectés FrostGuard. Le kit H914 comprend 50 clips de toiture. Avantages Facile à installer Sans entretien Fiable pendant une longue durée de vie : garantie produit de 2 ans disponible Informations techniques Marque : n Vent Raychem Clips : 50 par sachet Matériau : aluminium anodisé Hauteur : 19,3 mm Largeur : 38 mm Longueur : 53,3 mm Documents Fiche technique Instructions d'installation
Description Les kits de supports de fixation de toit nVent RAYCHEM WinterGard H913 et H914 sont utilisés pour fixer les câbles chauffants WinterGard Wet aux toits et aux gouttières. Les clips peuvent être fixés mécaniquement (vis ou clous) sur les toits en bardeaux de bois ou à l'aide d'adhésif sur les toitures métalliques, en ardoise ou composites. Les kits H913 et H914 sont homologués pour une utilisation avec les systèmes de câbles chauffants WinterGard Wet homologués UL et certifiés CSA, ainsi qu'avec les câbles chauffants pré-connectés FrostGuard. Le kit H913 comprend 10 clips de toiture. Avantages Facile à installer Sans entretien Fiable pendant une longue durée de vie : garantie produit de 2 ans disponible Informations techniques Marque : n Vent Raychem Clips : 10 par sachet Matériau : aluminium anodisé Hauteur : 19,3 mm Largeur : 38 mm Longueur : 53,3 mm Documents Fiche technique Instructions d'installation
Description Le kit de ruban d'application et d'étiquettes de traçage électrique nVent Raychem WinterGard H903 permet l'application du câble de traçage électrique nVent RAYCHEM sur les tuyaux pour les applications de protection contre le gel des tuyaux résidentiels et commerciaux légers. Chaque kit comprend un rouleau de ruban adhésif renforcé de fibre de verre de 20 mètres (1/2 po) de large et dix étiquettes de sécurité « Electric Traced ». Les étiquettes doivent être apposées sur l'isolant thermique du tuyau tous les 3 mètres (10 pieds), en alternance de chaque côté du tuyau, si nécessaire. Avantages Permet une installation facile du câble de traçage thermique nVent RAYCHEM pour la protection contre le gel des tuyaux Ne pas utiliser avec des tuyaux en acier inoxydable Informations techniques Marque : NVent RAYCHEM Type d'emballage Sac en polyéthylène Dimensions du colis (L x l x P) 10" x 6" x 2" Poids du colis 0,3 lb Documents Fiche technique
Description A Therma-Roof system can help prevent ice dams and icicles by maintaining a continuous path for melt water to drain from the roof. As long as a heated path from the roof to a safe discharge area is maintained, ice dams will not form. The system can be used on roofs and valleys and in downspouts and gutters made from many types of standard roofing materials, including metal, plastic, asphalt and fiberglass shingles. The Therma-Roof heating cable is laid in a "zigzag" fashion along the lower edge of the sloping rood. The heater should extend at least 12 in. (30 cm) above the level of the outer building wall, or 6in. (15cm) in above the snow fence, whichever is the higher, and extend down into the gutter. This will ensure a continuous run off path for melted water. Since this is not a self-regulating cable, it can not overlap at any point! Features 5 Watts per foot. For outdoor applications only. Do not use this product on wooden gutters or downspouts. Roof clips for cable and spacers included. Grounded 3-pronged plug with indicator light to show when the cable is on. Technical Information Length: 140 FT Watts: 700 W Amp: 5.8 A Voltage: 120 V Cable Type: Series Resistance Usage: WS: Wet Test and Weather resistance Min. Bending Radius: 0.5" (12mm) Installation Temperature: Min. Installation Temperature: -18°C (0°F) Operating Temperature: Max. Continuous Operating temperature: 25°C (77°F) Document Product Sheet Installation Manual
Description A Therma-Roof system can help prevent ice dams and icicles by maintaining a continuous path for melt water to drain from the roof. As long as a heated path from the roof to a safe discharge area is maintained, ice dams will not form. The system can be used on roofs and valleys and in downspouts and gutters made from many types of standard roofing materials, including metal, plastic, asphalt and fiberglass shingles. The Therma-Roof heating cable is laid in a "zigzag" fashion along the lower edge of the sloping rood. The heater should extend at least 12 in. (30 cm) above the level of the outer building wall, or 6in. (15cm) in above the snow fence, whichever is the higher, and extend down into the gutter. This will ensure a continuous run off path for melted water. Since this is not a self-regulating cable, it can not overlap at any point! Features 5 Watts per foot. For outdoor applications only. Do not use this product on wooden gutters or downspouts. Roof clips for cable and spacers included. Grounded 3-pronged plug with indicator light to show when the cable is on. Technical Information Length: 100 FT Watts: 500 W Amp: 4.2 A Voltage: 120 V Cable Type: Series Resistance Usage: WS: Wet Test and Weather resistance Min. Bending Radius: 0.5" (12mm) Installation Temperature: Min. Installation Temperature: -18°C (0°F) Operating Temperature: Max. Continuous Operating temperature: 25°C (77°F) Document Product Sheet Installation Manual
Description The Therma-Pipe series resistance plug-in heating cable is an economical alternative to self-regulating cables for pipe tracing applications. However, since this is not a self-regulating cable, it can not overlap at any point. It is factory assembled with a 3-prong plug so each cable simply connects to any grounded 120V outlet. Make sure you look at the Product Sheet to choose the correct length of cable needed for your installation! Features 7 Watts per foot. For outdoor applications only. Built-in bi-metal thermostat energizes the cable when the temperature falls below 4 °C (40 °F). For metallic and non-metallic pipes up to 1.5 in (3.8 cm) in diameter. Grounded 3-pronged plug with indicator light to show when the cable is on. Technical Information Length: 40 FT Watts: 280 W Amp: 2.34 A Voltage: 120 V Cable Type: Series Resistance Usage: WS: Wet Test and Weather resistance Min. Bending Radius: 0.3" (8mm) Installation Temperature: Min. Installation Temperature: 0°C (32°F) Operating Temperature: Max. Continuous Operating temperature: 25°C (77°F) Document Product Sheet Installation Manual
Description The Therma-Pipe series resistance plug-in heating cable is an economical alternative to self-regulating cables for pipe tracing applications. However, since this is not a self-regulating cable, it can not overlap at any point. It is factory assembled with a 3-prong plug so each cable simply connects to any grounded 120V outlet. Make sure you look at the Product Sheet to choose the correct length of cable needed for your installation! Features 7 Watts per foot. For outdoor applications only. Built-in bi-metal thermostat energizes the cable when the temperature falls below 4 °C (40 °F). For metallic and non-metallic pipes up to 1.5 in (3.8 cm) in diameter. Grounded 3-pronged plug with indicator light to show when the cable is on. Technical Information Length: 18 FT Watts: 126 W Amp: 1.05 A Voltage: 120 V Cable Type: Series Resistance Usage: WS: Wet Test and Weather resistance Min. Bending Radius: 0.3" (8mm) Installation Temperature: Min. Installation Temperature: 0°C (32°F) Operating Temperature: Max. Continuous Operating temperature: 25°C (77°F) Document Product Sheet Installation Manual
Description Global Commander's roof heating cable control is intended to be used with their roof and gutter de-icing cable. It only energizes your roof and gutter de-icing cable when necessary by sensing temperature and moisture. it prevents excess electrical waste while helping to protect your roof from ice dams. When the weather is warm, the meltwater will continue to drain to the ground, so there is no reason for the roof heating cable to be energized. Also, when the ambient temperature is cold enough that the heat dissipated from the roof does not melt snow, there is no need for the roof heating cable to be energized. De-icing cables only need to operate when there is a possibility of meltwater refreezing and causing ice dams. Document Brochure Instruction
Description Global Commander's preassembled heating cables for roof and gutter de-icing. Comes with a 3-pronged plug and roof clips for cable and spacers. Easy and quick to install. Available in multiple length. Features 120V Preassembled Cable 5 Watts per foot For outdoor applications only Roof clips for cable and spacers included Grounded 3-pronged plug with indicator light to show when the cable is powered on Technical Information Voltage: 120v Linear Density: 5w per Ft Cold Lead Length: 30 in (0.76m) Cable length: 30 FT (9.1m) Watts: 150w Outer Jacket: PVC Bus Wire: Nickel Plated Copper Minimum Bend Radius: 1/2 in (12mm) Warranty: 1-yar basic warranty on heating cable Application: Roof and Gutter De-Icing Document Brochure Instruction
Description Global Commander's preassembled heating cables for roof and gutter de-icing. Comes with a 3-pronged plug and roof clips for cable and spacers. Easy and quick to install. Available in multiple length. Features 120V Preassembled Cable 5 Watts per foot For outdoor applications only Roof clips for cable and spacers included Grounded 3-pronged plug with indicator light to show when the cable is powered on Technical Information Voltage: 120v Linear Density: 5w per Ft Cold Lead Length: 30 in (0.76m) Cable length: 100 FT (30.5m) Watts: 500w Outer Jacket: PVC Bus Wire: Nickel Plated Copper Minimum Bend Radius: 1/2 in (12mm) Warranty: 1-yar basic warranty on heating cable Application: Roof and Gutter De-Icing Document Brochure Instruction
Description Global Commander's preassembled heating cables for roof and gutter de-icing. Comes with a 3-pronged plug and roof clips for cable and spacers. Easy and quick to install. Available in multiple length. Features 120V Preassembled Cable 5 Watts per foot For outdoor applications only Roof clips for cable and spacers included Grounded 3-pronged plug with indicator light to show when the cable is powered on Technical Information Voltage: 120v Linear Density: 5w per Ft Cold Lead Length: 30 in (0.76m) Cable length: 60 FT (18.3m) Watts: 300w Outer Jacket: PVC Bus Wire: Nickel Plated Copper Minimum Bend Radius: 1/2 in (12mm) Warranty: 1-yar basic warranty on heating cable Application: Roof and Gutter De-Icing Document Brochure Instruction
Description Global Commander's preassembled p ipe tracing for freeze protection. Available in multiple length. Features • 7 Watts per foot. • For indoor and outdoor applications. • Built-in bi-metal thermostat energizes the cable when the temperature falls below 4 °C (40 °F). • For metallic and non-metallic pipes. • Grounded 3-pronged plug with indicator light to show when the cable is powered on. Technical Information Voltage: 120v Linear Density: 7w per Ft Cold Lead Length: 30 in (0.76m) Cable length: 18 FT (5.5m) Watts: 126w Outer Jacket: PVC Bus Wire: Nickel Plated Copper Minimum Bend Radius: 5/16 in (8mm) Warranty: 1-year basic warranty on heating cable Application: Metal and Non-Metallic Pipes. Helps to prevent damage caused by frozen pipes. Document Brochure Instruction
Description Global Commander's preassembled p ipe tracing for freeze protection. Available in multiple length. Features • 7 Watts per foot. • For indoor and outdoor applications. • Built-in bi-metal thermostat energizes the cable when the temperature falls below 4 °C (40 °F). • For metallic and non-metallic pipes. • Grounded 3-pronged plug with indicator light to show when the cable is powered on. Technical Information Voltage: 120v Linear Density: 7w per Ft Cold Lead Length: 30 in (0.76m) Cable length: 6 FT (1.8m) Watts: 42w Outer Jacket: PVC Bus Wire: Nickel Plated Copper Minimum Bend Radius: 5/16 in (8mm) Warranty: 1-year basic warranty on heating cable Application: Metal and Non-Metallic Pipes. Helps to prevent damage caused by frozen pipes. Document Brochure Instruction
Description Global Commander's preassembled p ipe tracing for freeze protection. Available in multiple length. Features • 7 Watts per foot. • For indoor and outdoor applications. • Built-in bi-metal thermostat energizes the cable when the temperature falls below 4 °C (40 °F). • For metallic and non-metallic pipes. • Grounded 3-pronged plug with indicator light to show when the cable is powered on. Technical Information Voltage: 120v Linear Density: 7w per Ft Cold Lead Length: 30 in (0.76m) Cable length: 30 FT (9.1m) Watts: 210w Outer Jacket: PVC Bus Wire: Nickel Plated Copper Minimum Bend Radius: 5/16 in (8mm) Warranty: 1-year basic warranty on heating cable Application: Metal and Non-Metallic Pipes. Helps to prevent damage caused by frozen pipes. Document Brochure Instruction
Description A Therma-Roof system can help prevent ice dams and icicles by maintaining a continuous path for melt water to drain from the roof. As long as a heated path from the roof to a safe discharge area is maintained, ice dams will not form. The system can be used on roofs and valleys and in downspouts and gutters made from many types of standard roofing materials, including metal, plastic, asphalt and fiberglass shingles. The Therma-Roof heating cable is laid in a "zigzag" fashion along the lower edge of the sloping rood. The heater should extend at least 12 in. (30 cm) above the level of the outer building wall, or 6in. (15cm) in above the snow fence, whichever is the higher, and extend down into the gutter. This will ensure a continuous run off path for melted water. Since this is not a self-regulating cable, it can not overlap at any point! Features 5 Watts per foot. For outdoor applications only. Do not use this product on wooden gutters or downspouts. Roof clips for cable and spacers included. Grounded 3-pronged plug with indicator light to show when the cable is on. Technical Information Length: 240 FT Watts: 1200 W Amp: 10.0 A Voltage: 120 V Cable Type: Series Resistance Usage: WS: Wet Test and Weather resistance Min. Bending Radius: 0.5" (12mm) Installation Temperature: Min. Installation Temperature: -18°C (0°F) Operating Temperature: Max. Continuous Operating temperature: 25°C (77°F) Document Product Sheet Installation Manual
Description A Therma-Roof system can help prevent ice dams and icicles by maintaining a continuous path for melt water to drain from the roof. As long as a heated path from the roof to a safe discharge area is maintained, ice dams will not form. The system can be used on roofs and valleys and in downspouts and gutters made from many types of standard roofing materials, including metal, plastic, asphalt and fiberglass shingles. The Therma-Roof heating cable is laid in a "zigzag" fashion along the lower edge of the sloping rood. The heater should extend at least 12 in. (30 cm) above the level of the outer building wall, or 6in. (15cm) in above the snow fence, whichever is the higher, and extend down into the gutter. This will ensure a continuous run off path for melted water. Since this is not a self-regulating cable, it can not overlap at any point! Features 5 Watts per foot. For outdoor applications only. Do not use this product on wooden gutters or downspouts. Roof clips for cable and spacers included. Grounded 3-pronged plug with indicator light to show when the cable is on. Technical Information Length: 200 FT Watts: 1000 W Amp: 8.3 A Voltage: 120 V Cable Type: Series Resistance Usage: WS: Wet Test and Weather resistance Min. Bending Radius: 0.5" (12mm) Installation Temperature: Min. Installation Temperature: -18°C (0°F) Operating Temperature: Max. Continuous Operating temperature: 25°C (77°F) Document Product Sheet Installation Manual
Description A Therma-Roof system can help prevent ice dams and icicles by maintaining a continuous path for melt water to drain from the roof. As long as a heated path from the roof to a safe discharge area is maintained, ice dams will not form. The system can be used on roofs and valleys and in downspouts and gutters made from many types of standard roofing materials, including metal, plastic, asphalt and fiberglass shingles. The Therma-Roof heating cable is laid in a "zigzag" fashion along the lower edge of the sloping rood. The heater should extend at least 12 in. (30 cm) above the level of the outer building wall, or 6in. (15cm) in above the snow fence, whichever is the higher, and extend down into the gutter. This will ensure a continuous run off path for melted water. Since this is not a self-regulating cable, it can not overlap at any point! Features 5 Watts per foot. For outdoor applications only. Do not use this product on wooden gutters or downspouts. Roof clips for cable and spacers included. Grounded 3-pronged plug with indicator light to show when the cable is on. Technical Information Length: 180 FT Watts: 900 W Amp: 7.5 A Voltage: 120 V Cable Type: Series Resistance Usage: WS: Wet Test and Weather resistance Min. Bending Radius: 0.5" (12mm) Installation Temperature: Min. Installation Temperature: -18°C (0°F) Operating Temperature: Max. Continuous Operating temperature: 25°C (77°F) Document Product Sheet Installation Manual
Description A Therma-Roof system can help prevent ice dams and icicles by maintaining a continuous path for melt water to drain from the roof. As long as a heated path from the roof to a safe discharge area is maintained, ice dams will not form. The system can be used on roofs and valleys and in downspouts and gutters made from many types of standard roofing materials, including metal, plastic, asphalt and fiberglass shingles. The Therma-Roof heating cable is laid in a "zigzag" fashion along the lower edge of the sloping rood. The heater should extend at least 12 in. (30 cm) above the level of the outer building wall, or 6in. (15cm) in above the snow fence, whichever is the higher, and extend down into the gutter. This will ensure a continuous run off path for melted water. Since this is not a self-regulating cable, it can not overlap at any point! Features 5 Watts per foot. For outdoor applications only. Do not use this product on wooden gutters or downspouts. Roof clips for cable and spacers included. Grounded 3-pronged plug with indicator light to show when the cable is on. Technical Information Length: 160 FT Watts: 800 W Amp: 6.7 A Voltage: 120 V Cable Type: Series Resistance Usage: WS: Wet Test and Weather resistance Min. Bending Radius: 0.5" (12mm) Installation Temperature: Min. Installation Temperature: -18°C (0°F) Operating Temperature: Max. Continuous Operating temperature: 25°C (77°F) Document Product Sheet Installation Manual
Description A Therma-Roof system can help prevent ice dams and icicles by maintaining a continuous path for melt water to drain from the roof. As long as a heated path from the roof to a safe discharge area is maintained, ice dams will not form. The system can be used on roofs and valleys and in downspouts and gutters made from many types of standard roofing materials, including metal, plastic, asphalt and fiberglass shingles. The Therma-Roof heating cable is laid in a "zigzag" fashion along the lower edge of the sloping rood. The heater should extend at least 12 in. (30 cm) above the level of the outer building wall, or 6in. (15cm) in above the snow fence, whichever is the higher, and extend down into the gutter. This will ensure a continuous run off path for melted water. Since this is not a self-regulating cable, it can not overlap at any point! Features 5 Watts per foot. For outdoor applications only. Do not use this product on wooden gutters or downspouts. Roof clips for cable and spacers included. Grounded 3-pronged plug with indicator light to show when the cable is on. Technical Information Length: 120 FT Watts: 600 W Amp: 5.0 A Voltage: 120 V Cable Type: Series Resistance Usage: WS: Wet Test and Weather resistance Min. Bending Radius: 0.5" (12mm) Installation Temperature: Min. Installation Temperature: -18°C (0°F) Operating Temperature: Max. Continuous Operating temperature: 25°C (77°F) Document Product Sheet Installation Manual
Description A Therma-Roof system can help prevent ice dams and icicles by maintaining a continuous path for melt water to drain from the roof. As long as a heated path from the roof to a safe discharge area is maintained, ice dams will not form. The system can be used on roofs and valleys and in downspouts and gutters made from many types of standard roofing materials, including metal, plastic, asphalt and fiberglass shingles. The Therma-Roof heating cable is laid in a "zigzag" fashion along the lower edge of the sloping rood. The heater should extend at least 12 in. (30 cm) above the level of the outer building wall, or 6in. (15cm) in above the snow fence, whichever is the higher, and extend down into the gutter. This will ensure a continuous run off path for melted water. Since this is not a self-regulating cable, it can not overlap at any point! Features 5 Watts per foot. For outdoor applications only. Do not use this product on wooden gutters or downspouts. Roof clips for cable and spacers included. Grounded 3-pronged plug with indicator light to show when the cable is on. Technical Information Length: 80 FT Watts: 400 W Amp: 3.3 A Voltage: 120 V Cable Type: Series Resistance Usage: WS: Wet Test and Weather resistance Min. Bending Radius: 0.5" (12mm) Installation Temperature: Min. Installation Temperature: -18°C (0°F) Operating Temperature: Max. Continuous Operating temperature: 25°C (77°F) Document Product Sheet Installation Manual
Description A Therma-Roof system can help prevent ice dams and icicles by maintaining a continuous path for melt water to drain from the roof. As long as a heated path from the roof to a safe discharge area is maintained, ice dams will not form. The system can be used on roofs and valleys and in downspouts and gutters made from many types of standard roofing materials, including metal, plastic, asphalt and fiberglass shingles. The Therma-Roof heating cable is laid in a "zigzag" fashion along the lower edge of the sloping rood. The heater should extend at least 12 in. (30 cm) above the level of the outer building wall, or 6in. (15cm) in above the snow fence, whichever is the higher, and extend down into the gutter. This will ensure a continuous run off path for melted water. Since this is not a self-regulating cable, it can not overlap at any point! Features 5 Watts per foot. For outdoor applications only. Do not use this product on wooden gutters or downspouts. Roof clips for cable and spacers included. Grounded 3-pronged plug with indicator light to show when the cable is on. Technical Information Length: 30 FT Watts: 150 W Amp: 1.3 A Voltage: 120 V Cable Type: Series Resistance Usage: WS: Wet Test and Weather resistance Min. Bending Radius: 0.5" (12mm) Installation Temperature: Min. Installation Temperature: -18°C (0°F) Operating Temperature: Max. Continuous Operating temperature: 25°C (77°F) Document Product Sheet Installation Manual
Description The Therma-Pipe series resistance plug-in heating cable is an economical alternative to self-regulating cables for pipe tracing applications. However, since this is not a self-regulating cable, it can not overlap at any point. It is factory assembled with a 3-prong plug so each cable simply connects to any grounded 120V outlet. Make sure you look at the Product Sheet to choose the correct length of cable needed for your installation! Features 7 Watts per foot. For outdoor applications only. Built-in bi-metal thermostat energizes the cable when the temperature falls below 4 °C (40 °F). For metallic and non-metallic pipes up to 1.5 in (3.8 cm) in diameter. Grounded 3-pronged plug with indicator light to show when the cable is on. Technical Information Length: 80 FT Watts: 560 W Amp: 4.67 A Voltage: 120 V Cable Type: Series Resistance Usage: WS: Wet Test and Weather resistance Min. Bending Radius: 0.3" (8mm) Installation Temperature: Min. Installation Temperature: 0°C (32°F) Operating Temperature: Max. Continuous Operating temperature: 25°C (77°F) Document Product Sheet Installation Manual
Description The Therma-Pipe series resistance plug-in heating cable is an economical alternative to self-regulating cables for pipe tracing applications. However, since this is not a self-regulating cable, it can not overlap at any point. It is factory assembled with a 3-prong plug so each cable simply connects to any grounded 120V outlet. Make sure you look at the Product Sheet to choose the correct length of cable needed for your installation! Features 7 Watts per foot. For outdoor applications only. Built-in bi-metal thermostat energizes the cable when the temperature falls below 4 °C (40 °F). For metallic and non-metallic pipes up to 1.5 in (3.8 cm) in diameter. Grounded 3-pronged plug with indicator light to show when the cable is on. Technical Information Length: 60 FT Watts: 420 W Amp: 3.5 A Voltage: 120 V Cable Type: Series Resistance Usage: WS: Wet Test and Weather resistance Min. Bending Radius: 0.3" (8mm) Installation Temperature: Min. Installation Temperature: 0°C (32°F) Operating Temperature: Max. Continuous Operating temperature: 25°C (77°F) Document Product Sheet Installation Manual
Description The Therma-Pipe series resistance plug-in heating cable is an economical alternative to self-regulating cables for pipe tracing applications. However, since this is not a self-regulating cable, it can not overlap at any point. It is factory assembled with a 3-prong plug so each cable simply connects to any grounded 120V outlet. Make sure you look at the Product Sheet to choose the correct length of cable needed for your installation! Features 7 Watts per foot. For outdoor applications only. Built-in bi-metal thermostat energizes the cable when the temperature falls below 4 °C (40 °F). For metallic and non-metallic pipes up to 1.5 in (3.8 cm) in diameter. Grounded 3-pronged plug with indicator light to show when the cable is on. Technical Information Length: 30 FT Watts: 210 W Amp: 1.75 A Voltage: 120 V Cable Type: Series Resistance Usage: WS: Wet Test and Weather resistance Min. Bending Radius: 0.3" (8mm) Installation Temperature: Min. Installation Temperature: 0°C (32°F) Operating Temperature: Max. Continuous Operating temperature: 25°C (77°F) Document Product Sheet Installation Manual
Description The Therma-Pipe series resistance plug-in heating cable is an economical alternative to self-regulating cables for pipe tracing applications. However, since this is not a self-regulating cable, it can not overlap at any point. It is factory assembled with a 3-prong plug so each cable simply connects to any grounded 120V outlet. Make sure you look at the Product Sheet to choose the correct length of cable needed for your installation! Features 7 Watts per foot. For outdoor applications only. Built-in bi-metal thermostat energizes the cable when the temperature falls below 4 °C (40 °F). For metallic and non-metallic pipes up to 1.5 in (3.8 cm) in diameter. Grounded 3-pronged plug with indicator light to show when the cable is on. Technical Information Length: 24 FT Watts: 168 W Amp: 1.4 A Voltage: 120 V Cable Type: Series Resistance Usage: WS: Wet Test and Weather resistance Min. Bending Radius: 0.3" (8mm) Installation Temperature: Min. Installation Temperature: 0°C (32°F) Operating Temperature: Max. Continuous Operating temperature: 25°C (77°F) Document Product Sheet Installation Manual
Description The Therma-Pipe series resistance plug-in heating cable is an economical alternative to self-regulating cables for pipe tracing applications. However, since this is not a self-regulating cable, it can not overlap at any point. It is factory assembled with a 3-prong plug so each cable simply connects to any grounded 120V outlet. Make sure you look at the Product Sheet to choose the correct length of cable needed for your installation! Features 7 Watts per foot. For outdoor applications only. Built-in bi-metal thermostat energizes the cable when the temperature falls below 4 °C (40 °F). For metallic and non-metallic pipes up to 1.5 in (3.8 cm) in diameter. Grounded 3-pronged plug with indicator light to show when the cable is on. Technical Information Length: 15 FT Watts: 105 W Amp: 0.88 A Voltage: 120 V Cable Type: Series Resistance Usage: WS: Wet Test and Weather resistance Min. Bending Radius: 0.3" (8mm) Installation Temperature: Min. Installation Temperature: 0°C (32°F) Operating Temperature: Max. Continuous Operating temperature: 25°C (77°F) Document Product Sheet Installation Manual
Description The Therma-Pipe series resistance plug-in heating cable is an economical alternative to self-regulating cables for pipe tracing applications. However, since this is not a self-regulating cable, it can not overlap at any point. It is factory assembled with a 3-prong plug so each cable simply connects to any grounded 120V outlet. Make sure you look at the Product Sheet to choose the correct length of cable needed for your installation! Features 7 Watts per foot. For outdoor applications only. Built-in bi-metal thermostat energizes the cable when the temperature falls below 4 °C (40 °F). For metallic and non-metallic pipes up to 1.5 in (3.8 cm) in diameter. Grounded 3-pronged plug with indicator light to show when the cable is on. Technical Information Length: 12 FT Watts: 84 W Amp: 0.70 A Voltage: 120 V Cable Type: Series Resistance Usage: WS: Wet Test and Weather resistance Min. Bending Radius: 0.3" (8mm) Installation Temperature: Min. Installation Temperature: 0°C (32°F) Operating Temperature: Max. Continuous Operating temperature: 25°C (77°F) Document Product Sheet Installation Manual