Klein Tools Cable Tester, Commander VDV Tester and Test-n-Map Remote Kit, Model VDV501-829

Description

Klein Tools' VDV Commander™ with Test-n-Map Remote Kit locates, tests and measures coax, data and telephone cables to ensure fast and accurate installations. It is ideal for identifying wiring faults including miswire, open fault, short fault, split-pair, and wire map. In addition, the Commander detects Power over Ethernet (PoE) and can store and output test results for easy report management.

Features

• Cable tester locates, tests and measures coaxial, data (RJ45) and telephone (RJ11) cables
• Identify wiring faults including miswire, open fault, short fault, split-pair, wire map
• Detect, identify and test Power over Ethernet (PoE)
• Measure cable length and distance-to-fault with Time Domain Reflectometry (TDR) technology
• Four tone options with probe included
• Measure paired-conductor cables up to 1500-Foot (457 m) with accuracy of up to +/-(5-Percent and 1-Foot/0.3 m)
• Single-end cable testing or complete two-end cable testing with Test-n-Map™ ID Remotes
• Perform active network (Ethernet) testing -- detect capabilities and connection speeds
• Locate and identify cables with location ID remotes, Test-n-Map™ ID remotes, Link Light and Tone Generator
• Test and identify location in one step (two-end testing) with Test-n-Map™ ID remotes (RJ45 and RJ12 ports) - supports up to 8 remotes
• Multiple style (4 cadences) tone generator capable of sending a tone on a single conductor, a conductor pair or over all conductors. Kit includes required Probe-PRO Tracing Probe (VDV500-123)
• Visually identify a hub or switch and locate cable runs with Link Light
• Save up to 256 cable or network tests, export and print reports
• Download brochure for more details and kit contents
• Emits an analog signal detectable by analog signal probes

Spécifications

Application: Cable Testing
Special Features: Accuracy/Measurement Resolution, Active Ethernet Detects Link Speed and Capabilities 10/100/1000base-T half or full duplex. Can link to network at 10/100base-T; Customizable Setup; Imperial or Metric Results; Multiple Languages: English/Spanish/French; Single-End Cable Testing
Cable Type: RG59, RG6/6Q, RG7/11, CAT3, CAT5, CAT6/6A
Overall Length: 4.375'' (11.1 cm)
Overall Height: 6.797'' (17.3 cm)
Test-n-Map ID Remotes: 1
Location ID: 20
Batteries: Commander: 6 x AA Alkaline Probe: 1 x 9V Alkaline
Battery Life: Commander: 20 Hours Active 10 Years Standby, Probe: 25 Hours Active 4 Years Standby
Supported Remotes: (20) F-Connector CoaxMap ID/RJ45LanMap ID
Display: LCD
Multiple Style Tone Generator: Yes (4)
Test & Measure Types: Cable Length Measurement to 1500 ft (457 m); Miswire Fault Detection; Open Fault Detection; Power Over Ethernet Detection; Shield Detection; Short Fault Detection; Split-Pair Fault Detection

Document

Brochure

Instruction (Commander)

Instruction (Software Application and Firmware Upgrade)

ProbePro Manual